12 best granite saws

Product description

The Makita 5” dry masonry saw is a powerful dry-cutting solution for tile, masonry and concrete. It combines a powerful 13 amp motor with a dust extraction port for improved dust extraction. The 4100KB will cut up to 1-9/16" at 90 degrees, and accepts contour blades for increased versatility in radius cutting applications. For added convenience, the saw attaches to an optional guide rail (#198673-2, sold separately) for improved cutting accuracy. Additional features include 1-3/8” dust extraction port that swivels 360 degrees, dust-protected trigger, and lock-on button for continuous operation.

• Powerful 13 amp motor delivers 12, 200 RPM for the most demanding applications
• Transparent upper guard dust cover for increased visibility
• High depth of cut capacity up to 1-9/16" at 90°
• Accepts contour blades for increased versatility in radius cutting applications
• Saw attaches to optional guide rail with guide rail adapter (#198673-2) to provide straight and acurate cutting

User questions & answers

Question:	I have the large dewalt d2400 tile saw but need something small for smaller cuts on tile. this saw look dry. will it work on time
Answer:	I don’t recommend this product. It lock doesn’t stay connected to Bluetooth unless the device it is paired to is in the home. If you pair it with your cell phone, you cannot connect to it. Rendering the key pad useless.
Question:	Can a diablo 5 inch fiber cement blade fit? originally the blades are for circular saws. but will a 5 inch circular saw fit this tool
Answer:	Mine doesn't work, won't lock. Returned. I do not recommend it.
Question:	Can I use with water
Answer:	In the back battery there's a reset button next to that there's a lever for left lock or right lock
Question:	What is difference between this Makita 4100NHX1 and the Makita 4100NH
Answer:	No

Product features

Powerful Dry Cutting of Tile, Masonry, Concrete and More

The Makita 5” Dry Masonry Saw is a powerful dry-cutting solution for tile, masonry and concrete. It combines a powerful 13 AMP motor with a dust extraction port for improved dust extraction.

The 4100KB will cut up to 1-9/16" at 90 degrees for maximum depth cutting capacity. For added convenience, the saw attaches to an optional guide rail (#198673-2, sold separately) for improved cutting accuracy. Additional features include 1-3/8” dust extraction port that swivels 360 degrees, dust-protected trigger, and lock-on button for continuous operation.

Product description

General Features: Professional, precision cutting of granite, marble, stone and other materials - Extremely quick set up time with patented rail adjustment and integrated clamping system - Ability to set the machine at 0- 45 degree for bevel cuts - Easy rail adjustments - Integrated powerful clamping system - True, finish ready cuts - Industrial linear motion bearings and tension control - No lateral movement - Job site friendly. One person set up, operation and transport - All accessories on-board - Increased cutting speed with with 15 amp durable Makita motor - Superior quality cuts made possible by motor carriage locked onto the rail - Extended cutting cability - Choice of 6 ft or 8ft heavy duty aluminum rails - Cuts up to 14.5ft long slabs with two 8ft rails - Adjustable height cutting head - Each rail has rubber pads to protect material surface from scratches - Detachable motor for easy set up and handling - General Specs & Warranty Information: Carriage proudly made in USA - Built like a tank. Solid aluminum quality construction - Money back guarantee - One year motor warranty & three year warranty on all other parts - Total weight: 49 lbs - 2 1/4 max. cutting depth - Tension adjustment - Valve controlled water hose attachment - Included with the purchase: 15 amp Makita motor with diamond cutting blade and GFCI protection - IMT-PRO LITE rail carriage - 2- 6ft aluminum rails - rail connector - 2- 800lbs sliding rail clamps - 2- Water hook up attachments - Instruction Manual -

• Lightweight 49 lbs (including rail) aluminum/stainless steel construction
• Durable, solid aluminum rails for precision cutting of toughest & hardest materials
• Fastest setup & one person operation
• One year motor warranty , Three year warranty on all other parts
• Carriage Made in USA

User questions & answers

Question:	Can two 8' rails be fasten together
Answer:	i will assume you mean, "will this saw work with tile?" yes. i bring this saw to all my tile jobs. it cuts without water, and is a must have when doing large tile, 12 x24 and greater. i use the saw for small cuts. outlets, corners, etc. it works well, and should be with every tile job. i would not suggest using it for every cut, you could but that is what the traditional wet saw is for. buy it. it's good to have.... don't be stupid... wear your safely glasses and hearing protection. when your old, feeding the birds is awesome! especially if you can see and hear them!!!
Question:	what size of blade is needed? And does it come with one
Answer:	That blade is rated at a max of 12000 rpm's. This saw would put it right up to or above that. Probably better off using that blade on a wood cutting circular saw.
Question:	When cutting a 45 degree bevel will it cut through 1.25” granite
Answer:	Yes, but with limits. I keep the tile wet with a spray bottle. Keeping itwet, but not submerged like a wet saw. Hope this helps. I've cut 1 1/4 inch thick granite using this method ....... It works really.
Question:	This come with the 8 or 12 ft rail
Answer:	From Makita's website it look like the 4100NHX1 is only 9.6 amps vs 12 amps for the 4100NH. Kinda makes sense as the 4100NH is a little more expensive.

Product description

The Cutter's Way 5" Wet Stone Cutter is designed for cutting stones including granite, marble, lime stone, slate, etc. With a 5" diamond blade, this stone cutter is capable of cutting 1-1/4" granite slabs. With a specially designed housing and flanges, the Cutter's Way 5" wet stone cutter can accept a 5" diamond contour blade for cutting radius of under mount sinks.

• Accepts 5" diamond blades.
• Equipped with a high quality water-feed system.
• Built-in GFCI (ground fault circuit interrupter).
• A 5" Samurai Diamond Blade is included.
• Water hose (10 feet) included.

User questions & answers

Question:	How to get a replacement hose
Answer:	Yes, we sell 16' version of the rail saw
Question:	Is there any provision for keeping the cut perpendicular to the surface or in a straight line, or is it 100% freehand
Answer:	71/4 in. Blade and yes it comes with a blade, just can't remember if the blade was a stone blade or a wood blade
Question:	Can it cut curves
Answer:	Yes, It will cut through 1 1/4" material.
Question:	will it cut hand held size rocks
Answer:	This listing includes 12 ft rail

Product description

TILE & TABLE SAWS

• Brand New in box. The product ships with all relevant accessories

User questions & answers

Question:	How do you change the blade on this
Answer:	There is a blade lock and it should have come with a tool to change it
Question:	Gfci corded
Answer:	Yes,it is
Question:	Can this make a curved cut, say for around a toilet application
Answer:	The way to make inside curves is to cut parallel "fingers" and snap them off. Then use the saw blade to grind it to the line. Remember that the blade is cutting from top so you'll need to either flip the tile to grind the back or use a grinder. You can use a regular tile saw that way as well.
Question:	Could you cut geodes with this saw? With a diamond blade
Answer:	It would certainly cut into the geode, but depending on the wall thickness as to whether it will cut into the cavity.

Product description

DEWALT DWC860W 4-3/8-Inch Wet/Dry Handheld Tile Cutter has a powerful 10.8 amp (1,300 watts) motor that delivers the cutting power to cut through granite, porcelain, concrete and other stone materials. Compact and lightweight at only 6.6-Pound Premium 4-3/8-Inch diamond blade for cutting ceramics and stone materials up to 1-3/8-Inch deep, wet or dry. The dust sealed switch protects the unit from contamination and prolonges the life of the unit. It also has a lock-on button to reduce user fatigue durign production cuts and a rubber ermold grip tp provide increased user comfort and ergonomics. Also includes: 13" Water line and regulator, 4-3/8-Inch DeWalt Diamond Blade, wrenches for blade change, and instruction manual.

• Power 10.8 amp motor delivers the cutting power to cut through granite, porcelain, concrete and other stone materials
• Premium 4-3/8-inch diamond blade allows the user to cut ceramics and stone materials up to 3-centimeters deep-wet or dry
• 13-Foot water line feeds water to the blade decreasing dust and increasing blade performance and life
• Bevels to 45 Degrees for quick angled cuts
• Lock-on button reduces fatigue during production cuts

User questions & answers

Question:	will a cupped blade fit in it for cutting out oval sinks holes for granite counter tops
Answer:	Not in my opinion
Question:	can this cut through 1/2" concrete slab
Answer:	Yes, the premium 4-3/8" diamond Blade allows the user to cut ceramics and stone materials up to 1 3/8' deep wet or dry.
Question:	is 4 1/2 or
Answer:	It comes with a 4 3/8 blade. A 4 1/2 blade for 20mm arbor can be used. Most 4 1/2 blades are 7/8, 20mm or 5/8 arbor with a bushing to fit the different sizes. A 4 1/2 blade is a tight fit. I knock out the 5/8 arbor, set the blade in place, then put in the 20mm bushing and seat it with the mandrel nut. You can get the blade on with the 20mm bushing installed with a bit of jiggering.
Question:	what is the deepest cut this saw will make? The cheap Ryobi I bought at the Depot wasnt quite deep enough with a 4" blade
Answer:	Hi. CORRECTED ANSWER: I measured the depth on my blade (which is slightly worn) and it is 1-5/16 inch (1.32 inch) for a straight up cut. For an angled cut, it will be less of course. I used it to cut through floor tile with a concrete/metal mesh base layer. There is absolutely no room in the blade guard to try an even slightly larger blade. It is a tight fit. The saw performs well and is easy to control as long as it is used with water flow. I tried to use it dry, and in less then a minute the whole house was filled with a thick cloud of dust.

Product features

DEWALT DWC860W 4-3/8-Inch Wet/Dry Masonry Saw

The DWC860W 4-3/8" Wet/Dry Handheld Tile cutter has a powerful 10.8 Amp motor to deliver power for cutting through granite, porcelain, marble and glass, yet it is lightweight and compact to reduce user fatigue. The DWC860W is ideal for back splash, threshold and plank and large format tile work. The flow adjustable water connection keeps the blade and material cool while helping to reduce water puddles in the work area.

Features

• Powerful 10.8 amp motor delivers the cutting power to cut through granite, porcelain, concrete, and other stone materials.
• Lightweight and compact
• Premium 4-3/8" diamond Blade allows the user to cut ceramics and stone materials up to 1 3/8' deep wet or dry
• 13,000 rpm max with no-load speed provides plenty of speed to complete the user applications.
• Bevels to 45 degrees for quick and precise angle cuts
• 12' water line feeds water to the blade decreasing dust and increasing blade performance and life
• Lock-on button reduces user fatigue during production cuts
• Adjustable depth-of-cut allows users to cut at various depths
• Dust-sealed switch protects the unit from contamination and prolongs the life of the unit
• Rubber overmold grip provides increased user comfort and ergonomics

Product description

This is the 5 Inch Wet Stone Saw Model ESC-125 From Alpha and this is exactly what you need. The Alpha ESC-125 Wet Stone Saw is designed for use in the stone, tile and glass industry. This machine is able to provide perfectly straight cuts which are required for quality fabrication and installation. Equipped with one of the most powerful motors in its class, the ESC-125 has the strength to power through tough materials, including 3cm granite, porcelain, and engineered stones when used with the proper blade. Alpha ESC-125 Wet Stonecutter is also equipped with a high-quality water feed system that eliminates the harmful dust particles which are common in dry cutting applications. Another safety feature included is a built-in GFCI (ground fault circuit interrupter). The Alpha ESC-125 Wet Stone Saw includes two unique features. One is a side handle for more stability and control. The second is a straight cutting guide enabling the user to trace the edge of the stone or any straight edge. Suitable for use in the shop or on the job site, the ESC-125 is ideal for any professional stone fabricator/installer or tile contractor. With this setup, you get the saw with the guide, a GFCI, a water valve and hose, garden hose adapter, wrench and extra brushes-- basically everything you need except the blade.

• 110 Volt
• Powerful 11.2 amps
• Accepts up to a 5" blade (20mm arbor)
• Light - just 6.8lbs
• Edge guide makes straight cuts idiot-proof!

User questions & answers

Question:	Does this saw draw water or do you need something to force water into it
Answer:	You can get the hose at any hardware store. Reuse the brass connector.
Question:	hi is this saw made here in the State or China
Answer:	A bottom plate will keep the cut perpendicular. Also if you want to ensure a straight line, you can use a straight 2x4 wood as a guide or purchase a guide rail and carriage assembly. For details, you can search Alpha carriage assembly and guide rail. Thanks,
Question:	Does it 45" angle
Answer:	The research I did says it can but it requires a different blade made for cutting curves. I think the blade sells for roughly $20 - $30..
Question:	Esta sierra tiene para cortes
Answer:	The diamond blade will sliced any granite, marble or rock. Since it's a 5" round blade, you can only cut into something

Product description

Drilax 1 1/4 Inch Diamond Drill Bit Tile Hole Saw Ceramic Porcelain Quartz Granite Glass Fish Tank Kitchen Bathroom Shower Faucet Installation 1.25 Inches Single Pack Super long life, commercial grade

Some of the general use areas for this Super Long Life Diamond Drilling Tool:

drill bit for ceramic tile

diamond drill bits for glass

ceramic drill bit

diamond hole saw drill bit 

diamond stone drill bits

tile drill bit

drill bits tile

tile bits

hole saw for glass

tile bits for drill

tile drill bits ceramic diamond, diamond tipped drill bits, glass hole saw, whole saw drill bit, whole saw kit, drill bit for glass, diamond tip drill bits for porcelain and glass, diamon drill, diamond drill bits for lapidary, glass tile marble hole drilling bit set, marble hole saw, diamond drill bits for porcelain tile, drill bits for glass, diamond dust, ceramic bit drill, drill whole, drill bit for ceramic pots, drill tips, glass tile drill bit set, diamond tipped drill, tile drill bit set

• Vacuum brazed diamond hole saw, tile drill bits, glass drill bits, ceramic drill bits for pots
• Standard 3/8 inch shank fits standard drill electric or cordless.
• High quality, diamond drill bits, glass drill bit, hole saw drill bit diamond - DRILL THROUGH TILES and Backer Cement Board
• Extra long diamond drill bits for ceramic tile, diamond core bits for granite and quartz countertop
• Extra long diamond drill bits for ceramic tile, diamond core bits for granite and quartz countertop

• Total Length 60mm,Thread 5/8-11 thread,Diamond height 15mm,Max working depth 50mm, Diameter 32mm 1-1/4"
• Multi-purpose drilling for granite & marble, masonry, concrete, tile/ceramic, glass, hard plastic
• Special Designed with Hole in both Sides of Drill Bit for fast Removing Stone Chips and Improve drilling efficiency
• Dry drilling without water,Use water for longer time
• Vacuum Brazed diamond technology provide very high efficiency,cuts faster,durable and sturdy

Product features

BGTEC Dry Diamond Core Drill Bits for Porcelain Tile Ceramic Marble Brick 5/8-11 Thread

Available Sizes::

20 mm 3/4";25 mm 1";28 mm 1-1/8";32 mm 1-1/4";35 mm 1-3/8";38 mm 1-1/2";40 mm,45 mm 1-3/4";50 mm 2";55 mm,60 mm,65 mm 2-1/2";68 mm,75 mm 3";90 mm 3-1/2";100 mm 4";

Color: Orange

Thread:5/8-11

Total Length: 60 mm

Diamond height :15 mm,

Max working depth: 50 mm

Application

Recommended Masonry/Stone:

Ceramic Tile,Porcelain Tile,Common Glass,Ceramic,Marble,Granite,Microlite,Quartz Stone

Not Recommended:

Stalinite,Metal,Wood,Plastic

Product description

Products Name: Diamond Saw Blade

Package Quantity: 5Pcs

Material: Diamond and Metal

Size: Diameter 4"/105 mm,Inner hole 15.88mm

• Universal for dry or wet cutting.
• Super thin turbo mesh rim diamond blade provide fast, precise, smooth and chip-free cutting experience for you.
• Thicker center to avoid vibrations and wobbling. High Performance diamond matrix provides long life and enhanced material removal.
• Diamond blade can be used as porcelain tile blade, ceramia tile blade, granite blade and other thin masonry blade.
• Quantity:5pcs/Lot

User questions & answers

Question:	is this wet or dry
Answer:	Saw does not draw water ... used outdoor garden hose connected to the included hose adapter. You can turn water on/off with valve on saw.
Question:	can i print this ad page
Answer:	Hi Peter I just baughtbthis alpha saw 2 months ago to cutc1 1/4 granite slab it is nade by alpha tools in USA and it is a beast I had to call to CSR and they build and work in USA. Have fun with this tool its amazing
Question:	What is the arbor size and does it come with adaptor rings
Answer:	No, I would recommend the Flex wet saw. It lasts longer and does the 45 degree angle cuts.
Question:	Can this be used to cut stone tile
Answer:	No, solo hace cortes al hilo. No hace cortes de inglete.

Product description

Drilax 1 1/2 Inch Diamond Drill Bit Tile Hole Saw Ceramic Porcelain Quartz Granite Glass Fish Tank Kitchen Bathroom Shower Faucet Installation inches Single Pack Super long life, commercial-grade.

Tall enough to go through 3cm thick countertops

Some of the general use areas for this Super Long Life Diamond Drilling Tool:

drill bit for ceramic tile

diamond drill bits for glass

ceramic drill bit

diamond hole saw drill bit 

diamond stone drill bits

tile drill bit

drill bits tile

tile bits

hole saw for glass

tile bits for drill

tile drill bits ceramic diamond, diamond tipped drill bits, glass hole saw, whole saw drill bit, whole saw kit, drill bit for glass, diamond tip drill bits for porcelain and glass, diamon drill, diamond drill bits for lapidary, glass tile marble hole drilling bit set, marble hole saw, diamond drill bits for porcelain tile, drill bits for glass, diamond dust, ceramic bit drill, drill whole, drill bit for ceramic pots, drill tips, glass tile drill bit, diamond tipped drill, tile drill bit

• 1-1/2 inch Vacuum brazed diamond hole saw, tile drill bits, glass drill bits, ceramic drill bits for pots
• Standard 3/8 inch shank fits standard drill electric or cordless.
• High quality, diamond drill bits, glass drill bit, hole saw drill bit diamond - DRILL THROUGH TILES and Backer Cement Board
• Extra long (tall) diamond drill bits for ceramic tile, diamond core bits for granite and quartz countertop
• Tall enough to go through 3cm thick countertops ceramic tile, diamond core bits for granite and quartz countertop

Product description

◆ Specification:

Size: 4.5''

Outer Diameter(mm): 105mm / 4.5''

Segment Height: 10mm

Core Thickness(mm):1.2mm

Arbor: 7/8"-5/8" (22.23mm-20mm)

Application:Porcelain tile, Granite ,Marble,stone ,ceramic



◆ Feature:

1. Universal For Dry or Wet Cutting. Using water which helps the blades longevity. The water cools down the blade from heating and decreases the friction in the cutting zone by flushing out all the debris of the materials cut; it also reduces the dust produced from the cutting.

2. Ultra-thin, (1.2mm at cutting edge) for fast cutting and low waste

3. High temperature extraction diamond blade has a long service life and used in segments which can cutting multi materials.

4. X teeth design provides fast smooth precise clean excellent cutting performance. New mesh turbine rim part design, mesh turbine helps to cool and bring out dust, so cutting efficiency is higher, faster and more stable.

5. Application: Super thin diamond blades are designed for hard material, cutting porcelain, ceramic tile, granite, sandstone quartz, marble, brick, slate and cement backer board.It will be perfect partner for tile installer and general home DIY.

6. 18V cordless angle grinder or tile bench saw is recommended.

• ☑ Fit Size: Outer Diameter: 115mm (4.5 inch). Thickness: 1.2mm. Suitable for most tile saws and hand-held angle grinders with a 7/8" or 5/8" Arbor.
• ☑ Universal for dry or wet cutting. Long service life of hot-pressed sintered blades.
• ☑ X teeth design provides fast smooth precise clean excellent cutting performance. High-Performance diamond matrix provides long life and enhanced material removal.
• ☑ Super thin turbo mesh rim diamond blade provide fast, precise, smooth and chip-free cutting experience for you. Thicker center to avoid vibrations and wobbling. High Performance diamond matrix provides long life and enhanced material removal.
• ☑ Our Diamond blade can be used for cutting porcelain, ceramia tile, granite , sandstone quartz, marble, brick, slate, cement backer board and other thin masonry blade. It will be a perfect partner for tile installers and general homemade DIYers.

• HIGH QUALITY Diamond Coated Hole Saw Drill Bit Tool 1-1/4 inches Diameter.
• STANDARD 3/8 inch shank fits standard drill. DUSTLESS - FAST DRILLING 1-1/8 inch Depth of Cut
• INSTALL Secure Mount Anchors Shower Grab Bar Shelves - DRILL THROUGH TILES and Backer Cement Board

User questions & answers

Question:	Will this drill through stainless steel sink under the granite
Answer:	I used mine to drill through subway tile in the shower stall. It made short work of that but for stainless steal you better talk to a plumber or plumbing supply.
Question:	What is the id depth
Answer:	It would be about 1-1/4 inches deep inside the hole saw
Question:	Will it cut through clay house bricks? I understand I will have to break out the core left in the brick to get the necessary depth
Answer:	I'm sure it will. It cuts through porcelain tile, which is much harder. It will get dull much faster than a carbide tipped drill bit, which I think would be a better option for drilling through brick.
Question:	Can this bit used for drilling wallboard and wood
Answer:	This bit is made specifically for drilling (grinding really) in stone products. There are many other hole saws listed on Amazon, made for use on wood, and most likely would be a little less expensive also.

Product features

High-Quality Diamond Coating

Drilax High-Quality Diamond Hole Saw - Longer Tool Life

Drilling Faucet Holes in Sinks

Drilax Diamond Drill Bits for Drilling Faucet Holes in Sinks - Help of a Wood Template.

Using water with a sprayer

Marble, Granite, Quartz - Drilling Holes

Drilax Diamond Hole Saw Drill Bits for Drilling Holes in Marble, Granite, Quartz

Drilling Wall and Floor Tiles

Drilax Diamond Drill Bits for Drilling Wall or Floor Tiles, installing Shower Doors, Faucets, Drain Holes

Diamond Drill Bit Instructions

DUSTLESS and CLEAN HOLES

Drilax Diamond Hole Saw Drilling Quartz Countertop ( up to 1-1/8 inch thickness)

For thicker countertop applications, please seek for our 3 Pcs or 5 Pcs sets.

Using Wood Template

You can use a wood template to locate the diamond hole saw.

Bathroom Renovations

Drilling holes for faucets or pipes for bathroom renovations.

Drilling Floor Tiles

Drilling Floor Tiles - Bathroom Renovation

Complete Bathroom - Shower Renovation

Complete Bathroom - Shower Renovation with DRILAX Diamond Tools