9 best 95mm hole saws
A 95mm hole saw is a cutting tool used for drilling large holes in various materials, typically with the assistance of a power drill. These tools are commonly used in construction, woodworking, plumbing, and other trades where precise and large-diameter holes are required. Here's what you should know about 95mm hole saws:
Size and Diameter: The "95mm" in a 95mm hole saw refers to the diameter of the hole it can cut. These hole saws are specifically designed for creating holes that are 95mm (about 3.74 inches) in diameter.
Construction: Hole saws consist of a cylindrical metal housing with sharp teeth around the edge. The teeth are designed to cut through various materials, including wood, plastic, metal, and even masonry.
Arbor Compatibility: To use a hole saw, you'll need an arbor, which is a tool that attaches the hole saw to your power drill. Make sure that your 95mm hole saw is compatible with the arbor you have or plan to purchase.
Material Compatibility: Different hole saws are designed for specific materials. Be sure to select a hole saw that is suitable for the material you intend to cut. For example, there are hole saws for wood, metal, concrete, and more.
Depth of Cut: Hole saws have a limited depth of cut, which is the maximum thickness of the material they can cut through. Ensure that the hole saw you choose can accommodate the thickness of the material you're working with.
Pilot Bit: Some hole saws come with a built-in pilot bit, which helps to stabilize the saw during drilling and ensures a more accurate hole. Others may require you to purchase a separate pilot bit.
Safety Considerations: When using a hole saw, it's important to wear appropriate safety gear, including safety glasses and hearing protection, as the cutting process can generate debris and noise.
Applications: 95mm hole saws are commonly used in applications such as installing plumbing pipes, creating holes for electrical outlets, making holes for doorknobs and locks, and more. They are versatile tools suitable for various construction and renovation projects.
Maintenance: To ensure the longevity of your hole saw, it's essential to clean it after each use and periodically sharpen or replace the teeth if they become dull.
Price and Brand: Hole saws come in a range of prices, with higher-quality brands often offering better durability and performance.It's a good idea to invest in a reputable brand if you plan to use the tool frequently.
In summary, a 95mm hole saw is a specialized cutting tool designed to create large-diameter holes in various materials. When selecting one, consider its compatibility with your power drill, the material you'll be working with, and any additional accessories you may need for accurate and safe drilling.
Below you can find our editor's choice of the best 95mm hole saws on the market
HSS BI-Metal, DEEP Cut Hole Saw with Arbor, 3-3/4" - 95MM Diameter
Starrett
Product description
Hardened, heat resistant, positive rake HSS teeth with alloy backing. Strong and shatter resistant. Economically cuts wood, metal and steel. For hand held or fixed drills. 2" cutting depth.
- Aggressive material penetration and swarf clearance, removing the need to carry a constant and variable pitch Hole Saw
- Constructed of hardened steel and abrasion resisting high speed steel teeth with a tough alloy body and cap
- The complete Multi-Purpose Saw
- Cutting depth of 51 mm (2”)
- Starrett designed Tooth geometry resulting in huge improvements in chip flow
User questions & answers
| Question: | Does this work on plastic |
| Answer: | Unfortunately, my assortment of hole is at a job site, so I can't measure. I can say that they will go through 2 in. dimensional lumber with no problem. AND, depending on the material you are cutting, you could go in to the max depth, break out what's cut, and continue through to any depth to the limit of your extension drivers .. Hope this helps .. Russ Pratt, Webster, MA |
| Question: | Is the arbor removable |
| Answer: | Yes, the 2L fits the 3-3/4 hole saw |
| Question: | What size shank is on this |
| Answer: | 2. |
| Question: | What size is the shank of this holesaw |
| Answer: | I bet you could |
| Question: | What is the cut depth |
| Answer: | Never tried that before, it might depend on the wire gauge of the screen. I use this to cut holes in sheet metal for duct work. The sheet metal is usually 24 to 26 gauge. In my opinion if it is used on just a regular screen on a window, it might tear it before it cuts it. If it's a heavy gauge screen, it should work. Hope this helps. Thanks! |
| Question: | Does this fit the 2L arbor |
| Answer: | Bit wont go deep enough for that |
Product features
Twice as Durable
With teeth that cut 50% faster than our previous hole saws, the new LENOX Bi-Metal Hole Saws with T3 technology last twice as long even when cutting through metal for unbeatable performance and unmatched efficiency. These hole saws feature the innovative Speed Slot design to make plug ejection fast and easy.
2X More Durable
LENOX Hole Saws with T3 technology easily cut through metal and still last twice as long as previous generation hole saws.
Thicker Walls
These hole saws are constructed with thicker walls to maintain integrity longer and lose fewer teeth on tough materials than traditional hole saws.
Built to Last
LENOX Hole Saws with T3 Technology are 50% more durable than previous generations for long-lasting performance.
95mm Diamond Hole Saws Drill Bit Masonry Drilling Tools for Stone Glass Tile
JOINER
Product description
95 mm 3-3/4" inch Diamond Coated Hole Saw Drill Bits for Stone Granite Marble Ceramic
Product Specification
Product Name: Diamond masonry bit, 95mm diamond hole saw
Outside Diameter : 95mm
Hex Shank Diameter: 10 mm (3/8")
Total length: 65mm (2-9/16")
Drill depth: 29-30mm
Quantity: Only 1 Piece
Use: Masonry Drilling
Material: Diamond, metal
Type: Core Drill Bit
Features
Brand new; high quality
Easy to use, Good Performance and long life
Excellent for making clean and accurate hole on stone, granite, marble, tile
Works better with a electric drill (Excluding in this item )
Diamond drill set with standard 3/8" hex shank that will fit cordless screwdrivers, drills etc or use in standard drill chuck
Drilling speed: drill a hole in seconds
Use with water as a lubricant
The diamond hole saw Does NOT have Center Pilot Drill
There is no need for a Pilot Drill Bit, because pilots are not safe for stone/tile/glass
Quick Tips
1. Please add water for coolant and drill slowly
2. Start drill at 45 degree to surface and align to 90 degree as hole forms
3. Never use drills while machine is in hammer action
4. Holes require no ruther work as cutting is clean
How to use a hand drill to drill holes in the glass/tile/stone?
Step 1. The bit on the glass/tile/stone 45 degree, open a half-moon notch on it
Step 2. Slowly up the bit to 60 degrees, and then gently drill
Step 3. Reached 90 degrees, continue to drill
Step 4. Drill through the glass/tile/stone finally, the technique requires a “wobble” of the drill rather that steady pressure straight on
We Can List Any Size( Hole Diameter from 2.5mm - 160mm) & Amount Of This Product
Welcome to Visit Our Store:
www.amazon.com/shops/DiamondTools30
- Product Name: Diamond tip masonry bit, Stone cutting bits, Large hole saw, Granite hole bit
- Outside Diameter:95mm(3-3/4"); Hex Shank Diameter:10 mm (3/8"); Total length:65mm; Drill depth:29-30mm
- Excellent for making clean and accurate hole on stone, granite, marble, tile
- Diamond drill set with 3/8" hex shank that will fit cordless screwdrivers, drills or drill chuck
- NOT have center pilot drill;Start drill at 45 degree to surface and align to 90 degree as hole forms
User questions & answers
| Question: | what is the height of the bit, what is the maximum thickness of the glass it can drill |
| Answer: | I've used bi-metal teeth on plastic many times without any trouble.you'll be good |
| Question: | Can it cut a concrete block |
| Answer: | Yes it is removable. |
| Question: | will this cut cement pavers |
| Answer: | Teeth per Inch (25mm): 5-6 Diameter (mm): 32 Diameter (in): 1-1/4" Cutting Depth (mm): 51 Cutting Depth (in): 2 Thread Size: 1/2 - 20 Hope this information helps! |
| Question: | Does it work for concrete |
| Answer: | Looks to be 3/8th |
JINGLING 95mm 3-3/4" inch Diamond Coated Tool Drill Bit Hole Saw for Glass Tile Ceramic Marble Color Silver
JINGLING
Product description
95mm 3-3/4” inch Diamond Coated Drill Bit Hole Saw Glass Tile Ceramic Marble Granite
Product Name: 3-3/4” inch Diamond tip drill bit, 95 mm Glass hole saw bit, 95mm Glass drill bit
Product Description:
Hole Diameter: 95mm (3 3/4” inch)
Shank Diameter: 10mm (3/8")
Total Length: 55mm (2-3/16")
Drill depth: 26mm depth
Quantity: 1 Piece
Features:
Brand new & high quality
Easy to use, good performance and long life
Excellent for making clean and accurate hole on glass, tile, stone, granite and marble
Works better with an electric drill (Excluding in this item)
Use with water as a lubricant
Drilling speed: drill a hole in seconds
Quick Tips
1. Please add water for coolant and drill slowly
2. Start drill at 45 degree to surface and align to 90 degree as hole forms
3. Never use drills while machine is in hammer action
4. Holes require no futher work as cutting is clean
How to use a hand drill to drill holes in the tile?
Step 1. The bit on the tile 45 degree, open a half-moon notch on it
Step 2. Slowly up the bit to 60 degrees, and then gently drill
Step 3. Reached 90 degrees, continue to drill
Step 4. Drill through the tile finally
Welcome to Visit Our Store:
www.amazon.com/shops/DiamondTools30
- Product Name: 95mm Diamond tip drill bit, 95 mm Glass hole saw bit, 3-3/4” inch Glass drill bit
- Hole Diameter: 95mm (3-3/4” inch); Shank Diameter: 10mm (3/8"); Total Length: 55mm
- Suitable for use in drill hole on glass, tile, ceramic, stone, marble or granite
- The hole does not need further work because the cut is clean
- Start drill at 45 degree to surface and align to 90 degree as hole forms
User questions & answers
| Question: | Will this bit cut through brick |
| Answer: | the interior bit dimension is 1 3/16". therefore the maximum cut thickness is 1 3/6". the exterior bit height is 1 3/8" |
| Question: | Would this work to cut through the plaster in lathe and plaster walls |
| Answer: | Yes. |
| Question: | Does it have a pilot bit |
| Answer: | Hello, yes, you can using 100mm diamond hole saw to drill cement pavers. The water is required to cool and lubricate when drilling process, and the technique requires a “wobble” of the drill rather that steady pressure straight on. |
| Question: | I have a thin slate counter (from old school blackboard). Would this be the right choice |
| Answer: | Dear Customer, Thank you for your inquiry. It can work for concrete, but the hole saw has only a short life and maybe only drilling a few holes. Please using with water as a lubricant. Should you have any queries, please contact me directly. Best Regards! |
Disston E0102444 3-3/4-Inch Boxed Blu-Mol Bi-Metal Hole Saws, 95mm
Disston
Product description
M42 cobalt bi-metal cutting edge provides shock resistant teeth and resists tooth slippage. 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration. 3/16-Inch back plate eliminates need for drive plate.
- Provides Shock Resistant Teeth And Resists Tooth Slippage
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration
- 3/16" back plate eliminates need for drive
- Package height: 2. 25"
User questions & answers
| Question: | What is the shank hole size on this hole saw? 1/2" or 5/8"? I bought it and when I measure it, it looks inbetween at 9/6" (which can't be right |
| Answer: | It depends on how thick the brick is. It can only cut to the depth of the bit. Also no center drill bit so it's tricky to use |
| Question: | This does not come with a bit, it is just the saw. What drill bit do I need to purchase to use this |
| Answer: | This work great on porcelain tile that harder then plaster |
| Question: | Can this be used to cut thru metal |
| Answer: | This type of drill bit has no pilot. You can drill a hole without pilot, just need a little trick. How to use a hand drill to drill holes in the glass? Step 1. The drill position on the glass 30 degree, drilling a half-moon notch in the glass; Step 2. Slowly up the bit to 45 degrees, and then gently drill; Step 3. Slowly up the bit to 60 degrees, continue to drill; Step 4. Reached 90 degrees, drill through the glass finally Remember to add water coolant and drill slowly |
| Question: | Does this require a mount with a center bit and if so what kind, type, and size |
| Answer: | Yes, this would be the right choice. There is no mandrel, so you will need to make a guide for the drill out of a piece of plywood or lumber, drill a 50 mm hole in that and then place the lumber over the slate to guide the diamond hole saw. |
Disston E0103140 3-3/4-Inch Blu-Mol Carbide Tipped Hole Saws Boxed, 95mm
Product description
Carbide tip allows for greater heat and wear resistance than bi-metal. . Provides 10 times greater tool life on abrasive materials. Ideal for plumbing, marine and aircraft applications.
- Package Dimensions: 4.75 L x 4.75 H x 2.5 W (inches)
- Package Weight: 0.51 pounds
- Country of Origin : China
- Carbide tip allows for greater heat and wear resistance than bi-metal
User questions & answers
| Question: | Is there a hole in the center to hold a drill bit |
| Answer: | This hole saw uses the same arbor with center bit as any hole saw does. |
Disston E0211333 3-3/4-Inch Boxed Blu-Mol Xtreme Bi-Metal Hole Saws, 95mm
Disston
Product description
Large openings in backing plate allows for quick removal of cut material. Wide slot designs on sidewalls and backing plate for increased visibility while cutting. 1 1/2-Inch depth of cut and fleem ground teeth for longer life.
- Large openings in backing plate allows for quick removal of cut material
- Wide slot designs on sidewalls and backing plate for increased visibility while cutting
- 1 1/2-Inch depth of cut and fleem ground teeth for longer life
- Country of Origin:China
User questions & answers
| Question: | Does it come with pilot drill bit and arbor |
| Answer: | Yes. It holds a standard arbor |
| Question: | What pilot drill or mandrel works with this product |
| Answer: | It would be a 5/8" arbor But you can get them in 3/8" or 7/16" shanks. |
| Question: | does this attach to a typical 2 pin arbor/mandrel |
| Answer: | The bit holder and part that connects to this unit is a standard. I used my Milwaukee hole saw. So I'm guessing it's a standard. |
| Question: | Does it thread onto the arbor |
| Answer: | Yes it cuts metal. |
HSS FASTCUT HOLESAW 3-3/4" (95MM)
Starrett
Product description
Hardened, heat resistant HSS, with Alloy backing and a straight 5.5-Pitch smoothly cuts thin cross sections of sheet metal, corrugated or perforated steel, and applications with interrupted cuts. 1-5/8 inch.
- Provides a smooth cut, with minimal tendency to bite or snag on contact with irregular surfaces
- Constructed of hardened steel and abrasion resisting high speed steel teeth with a tough alloy body and cap
- 5-1/2 teeth per inch/25mm make this Saw ideal for thinner gauge material
- Cutting depth of 41 mm (1.5/8”)
HOHXEN M42 HSS Hole Saw,95mm Heavy Duty Hole Saw Tooth Cutting Opener Drill Bit for Wood Aluminum Iron Sheet Pipe Plastic
HOHXEN
- ☀10 SELECTABLE HOLE DIAMETERS：75mm,80mm,85mm,90mm,95mm,100mm,105mm,110mm,115mm,120mm,solutions to all dimensions of the problem.
- ☀HEAT TREATED M42 HSS Bi-metal HOLE SAW：Made of high quality HSS carbon steel & Bi-metal steel with sharp edges and high hardness. strong and sturdy.The precision of the concentric degree, so that the teeth edge of the uniform, to extend the life of the hole.
- ☀ CUTTING DESIGN：It’s cutting depth of 25mm.With the non-binding clean edge design, this hole saw cuts smooth and easy. And the spring on the drill bit would automatically pushes the disc out of the saw immediately after completing the hole
- ☀ EQUIPPED WITH A 93mm CENTER CONNECTING ROD：For your convenience, we have a 93mm center connecting rod for you.
- ☀APPLICATION： Suitable for Pistol Drill, Bench Drill,Vertical Drilling Machine etc. Widely used in Plate Hole, Home Wood, Galvanized Pipe, Fire Pipe, Plastic, Gypsum Board and Other Opening Operation.
Product features
10 SELECTABLE HOLE DIAMETERS:
Disston E0206025 3-3 3-3/4-Inch RemGrit Carbide/4-Inch RemGrit Carbide Grit Hole Saws, 95mm
Disston
Product description
Cuts extremely hard abrasive materials. Cutting edge of tungsten carbide particles bonded to alloy steel back. High heat and abrasion resistance, no teeth to dull or chip, resists snagging and smooth cutting.
- Cuts extremely hard abrasive materials
- Cutting edge of tungsten carbide particles bonded to alloy steel back
- High heat and abrasion resistance, no teeth to dull or chip, resists snagging and smooth cutting
- Country of Origin: China
User questions & answers
| Question: | Will this cut through 1/8" thick steel plate |
| Answer: | I use the Irwin 373003 mandrel, the Dewalt 1803 (and many other brands) will also work. You can also use the smaller mandrels (i.e. Irwin 373002) however, you will have to use an adapter. |
| Question: | will it cut tile |
| Answer: | Yes |
| Question: | what is the arbor type |
| Answer: | Yes, standard arbor from many manufacturers. |
Latest Reviews
View all
Matrix Curly Hair Shampoos
- Updated: 30.04.2023
- Read reviews
Rowenta Generators
- Updated: 22.05.2023
- Read reviews
Dehydrated Cat Treats
- Updated: 19.05.2023
- Read reviews
Small Tape Recorders
- Updated: 02.02.2023
- Read reviews
Dandelion Weed Controls
- Updated: 18.03.2023
- Read reviews