12 best jacobs chuck for wood lathe
Jacobs Chuck is a well-known manufacturer of drill chucks, including those used in woodworking lathes. These drill chucks are categorized under various product categories related to power drills, power tools, and tool accessories. Below, I'll provide some information about Jacobs Chuck for wood lathe applications:
Drill Chucks: Jacobs Chuck produces a range of drill chucks designed to be compatible with various power drills and woodworking equipment. These chucks are a crucial component of a wood lathe setup, as they hold the drill bit securely in place.
Power Drill Parts & Accessories: The chucks manufactured by Jacobs Chuck are considered accessories or parts that can be used with power drills. These chucks are typically used when you need to perform drilling operations on a wood lathe, allowing for versatility in your woodworking projects.
Power Tool Parts & Accessories: Apart from drill chucks, Jacobs Chuck may offer other power tool parts and accessories, though their primary focus is on chucks. These accessories can enhance the functionality and performance of power tools, including wood lathes.
Tools Home Improvement: The products associated with Jacobs Chuck, such as drill chucks for wood lathes, fall under the category of tools and home improvement. They are essential components for woodworkers and DIY enthusiasts looking to improve their woodworking tools and accessories.
In the context of a wood lathe, the Jacobs Chuck would typically be used to hold drill bits or other attachments securely, allowing for precision drilling and shaping of wood. The key benefit of using a quality chuck like those from Jacobs Chuck is the ability to quickly change out drill bits or other tooling, which is essential for efficiency and accuracy in woodworking projects.
Remember that the specific models and compatibility of Jacobs Chuck products may vary, so it's essential to consult the manufacturer's website or product documentation for detailed information on the specific chuck models suitable for your wood lathe or woodworking needs.
Below you can find our editor's choice of the best jacobs chuck for wood lathe on the market
PSI Woodworking Products TM32KL 1/2-Inch Keyless Drill Chuck with #2 Morse Taper Arbor (1/2" 2MT Keyless)
PSI Woodworking
Product description
This PSI Woodworking #TM32KL Keyless 1/2-Inch Drill Chuck has a #2 MT mount, and will hold drill bits up to 1/2-Inch in diameter. It can be used in either the headstock or tailstock, and tightens by hand without the need for a chuck key. This product is perfect for drilling on your lathe. Just chuck the wood workpiece in the headstock and the drill bit in the tailstock, then feed the stationary drill into the spinning work. very simple. It is removed easily with a knock-out bar.
From the Manufacturer
The feature of PSI woodworking products TM32KL Keyless 1/2-Inch Drill Chuck with a 2 MT Mount will hold drill bits up to 1/2-Inch in diameter , drill chuck mounts in the 2 MT. It can be used in either the headstock or tailstock , tightens by hand without the need for a chuck key , removed easily with a knock-out bar.
- Includes the 1/2" Keyless Drill Chuck and #2 Morse Taper Arbor
- This 3-Jaw Chuck will mount into the headstock or tailstock of any lathe that accepts #2MT accessories
- The #2MT Arbor accepts 1/4" x 20tpi draw bolt; Draw bolt not included
- Removes easily with knock out bar
- Great for holding drill bits, small turnings, dowels, pen mandrel shafts, and much more
User questions & answers
| Question: | What is the smallest bit that this chuck will hold |
| Answer: | Depends on whether the shopsmith takes mt1 or mt2 accessories. This is mt1. |
| Question: | What size of Jacobs taper has this arbor? Can i order one |
| Answer: | My shaft come from3/8 to 1/2 in |
| Question: | Could someone tell me the length of then morse taper? I need to see if it will fit my drill press |
| Answer: | You'll need to check the taper on your lathe's tailstock. My old Craftsman lathe uses MT1 tapers, this chuck would fit. |
| Question: | does the chuck come with the 2mt arbor |
| Answer: | If your Shop Fox uses a Morse Taper #2, yes. Otherwise, I don't know what your Shop Fox uses. Sorry. |
1/32"- 5/8" Heavy Duty Drill Chuck with Chuck Key and MT2 Shank
Z Live Center
Product description
Please check the arbor size before purchasing. Heavy duty design. Special quenching treated key parts increases durability. Suitable for drill presses or lathes spindle accepts MT2 shank Jaws are specially engineered to achieve balance. JT33 mounted. Chuck key and MT2-JT33 arbor are also included in the package. Please note, we have pre-installed the arbor to the drill chuck and lubricated together againsting rusty. For first time use, please uninstall the arbor and drill chuck and clean the lubricate to prevent the possible slippery.
- Clamping Range: 1/32" - 5/8".
- Chuck Overall Length: 93mm
- Shank Size: Morse Taper 2 (MT2)
- Accuracy: 0.005"
- Chuck Mount : JT33
User questions & answers
| Question: | Will this work with a jet jdp-14mf |
| Answer: | The key less drill chuck I purchased has a #2MT, I am using the key less drill chuck in the drive head stock on a Jet 1442 wood turning lathe. |
| Question: | Is this chuck made with ball bearings |
| Answer: | Yes, TM32KL includes the #2MT Arbor |
| Question: | will the chuck work on a guardian power drill press model BDM-58-12s |
| Answer: | No its a taper its a taper fit |
| Question: | Will this chuck fit a HDC floor style drill press |
| Answer: | yes the drill arbor will fit you wen 3420. they both have the mt1 taper arbor. |
PSI Woodworking Products TM32 1/2-Inch Drill Chuck with #2 Morse Taper Arbor (1/2" 2MT)
Product description
#2 Morse taper mount for Delta, Jet, PSI, and other Midi lathe headstocks and tailstocks. A 1/2-Inch diameter 3-jaw mechanism can be used for securing small turnings or pen mandrels at the headstock, or a drill bit in the tailstock. Accepts a 1/4-20" draw bolt (not supplied) for safety. Will hold drill bits up to 1/2-Inch in diameter. Drill chuck mounted in the #2 MT can be used in either the headstock or tailstock. Tightens with a chuck key(included) for excellent grip. Removed easily with a knock-out bar.
- Includes the 1/2" Drill Chuck, #2 Morse Taper Arbor, and Jaw Tightening Key
- This 3-Jaw Chuck will mount into the headstock or tailstock of any lathe that accepts #2MT accessories
- The #2MT Arbor accepts 1/4" x 20tpi draw bolt; Draw bolt not included
- Removes easily with knock out bar
- Great for holding drill bits, small turnings, dowels, pen mandrel shafts, and much more
User questions & answers
| Question: | Will this fit a Shop Fox w |
| Answer: | I believe it is a standard 3/8 chuck, but i would suggest taking it to your local hardware store and finding one that fits. |
| Question: | What is the smallest bit size that this will take |
| Answer: | Yes, it comes with a key. This was a great purchase for me, be sure you have the correct morse taper number. |
| Question: | I just received this and lost my chuck key. Which one do I order |
| Answer: | it should. From what I found that lathe has a 1" 8tpi thread, which matches this. |
| Question: | Does this come with the chuck key |
| Answer: | My would guess yes. As long as your lathe has the 1 x 8tpi or 34 x 16tpi, it should work. So far this chuck has worked very well. No set up as long as the larger jaws are the proper size for your work and tightening the jaws is very easy and they stay tight. Good device. .... note I'm a novice so I may be easily impressed!! Good luck. |
Product features
Ideal to hold Small Turnings and Drill Bits
The PSI Woodworking Products TM32 1/2-Inch Drill Chuck includes the 1/2" Drill Chuck, #2 Morse Taper Arbor and a Jaw Tightening Key that help you in easily holding drill bits, small turnings, dowels, pen mandrel shafts and much more. As you will be able to tighten this tool with a chuck key, you will be able to get and excellent grip on it. It can also be removed easily with a knock-out bar.
HFS (R) Woodworking Diameter Drill Chuck with 2 Morse Taper Mount (1/2IN)
Product description
Woodworking Diameter Drill Chuck with 2 Morse Taper Mount (1/2IN)
- Packing: Includes the 1/2" Drill Chuck, #2 Morse Taper Arbor, and Jaw Tightening Key
- Installation: This 3-Jaw Chuck will mount into the headstock or tailstock of any lathe that accepts #2MT accessories
- Application: Great for holding drill bits, small turnings, dowels, pen mandrel shafts, and much more
- Tightens with a Chuck key for excellent grip
- Removes easily with knock out bar
User questions & answers
| Question: | does it come with chuck key if not what size chuck key does it use |
| Answer: | Yes |
| Question: | Is the mt2 adapter included |
| Answer: | Yes, it's a one piece unit |
| Question: | Is the mt2 adapter included |
| Answer: | Yes, it's a one piece unit |
| Question: | Does it fit in a 3/8 drill |
| Answer: | No, it has a #1 tapered shank. Good only for drill press or lathe. |
Jacobs 1/2" Drill Chuck Wood Lathe Accessory MT1 Arbor Adapter No.1 Morse Taper
Product description
Will fit all brands and models of wood and metal lathes with Morse Taper No. 1 MT1 spindles and rams. Most Craftsman 103.xxxxx and 113.xxxxx series 9" and 12" wood lathes have MT1 spindles
- No.1 Morse Taper Arbor with Jacobs brand 3-jaw screw on type drill chuck.
- Arbor and chuck have 1/2"-20 threads. Chuck capacity is 1/2" (1.5 - 13mm).
- Fits an MT1 Lathe Headstock Spindle or Tailstock Ram.
- For all brands and models with MT1 Spindles & Rams
Jacobs 1/2" Drill Chuck Wood Lathe Accessory MT2 Arbor Adapter No.2 Morse Taper
Product description
Will fit all brands and models of wood and metal lathes with Morse Taper No. 2 MT2 spindles & rams. Most Rockwell/Delta wood lathe models have MT2 spindles.
- No.2 Morse Taper Arbor with Jacobs brand 3-jaw screw on type drill chuck.
- Arbor and chuck have 1/2"-20 threads. Chuck capacity is 1/2" (1.5 - 13mm).
- Fits an MT2 Lathe Headstock Spindle or Tailstock Ram.
- For all brands and models with MT2 Spindles & Rams
Earl Diamond Super Heavy Duty Drill Chuck 1/2" Capacity with MT2 Morse Taper 2 Arbor & K32 Key (B16)
Product description
Product Features
☞Keyed Chuck with 2MT Spindle,1/2 in.
☞Comes complete with a drill chuck key.
☞ Perfect drill chuck accessory for NOVA Lathes, or any lathe or drill press with a 2MT spindle. It can hold 1/16 inches/0.5mm through to 1/2inch/13mm.
Specification:
☞Color: Silver .
☞Material: 40CR.
☞Weight: 1.92 LB.
- Hardness:HRC60
- Material:40CR
- Component:Comes With K32 Key
- Taper shank:MT2 Morse Taper #2 threaded arbor
- Bit holding Capacity: 0.5-13mm(1/16" - 1/2"/up to 1/2")
User questions & answers
| Question: | Can you use this on Delta drill press |
| Answer: | this is designed for use with a wood lathe, not a drill press. You'll probably need a chuck specifically designed for your drill |
| Question: | Have earl diamond 1/2" chuck, b16 0.5 - 13mm, with an r8 shank that i need to connect to my lathe with a morse 2 taper. what should i get |
| Answer: | If the shank can be taken off, then just purchase the appropriate Morse 2 shank 9depends on if your shank interface is threaded, or set with a lock screw). Otherwise, I would just purchase this chuck with the m2 taper. |
| Question: | Is the smallest drill diameter .5mm or 3/8" (9.5mm |
| Answer: | .5 |
| Question: | I have chicago machine tools model i-17 with spindle mt#2. will this fit |
| Answer: | This fits any number 2 morse taper, worked great in my nova lathe. |
Jacobs Drill Chuck 3/64" - 1/2" 1.5-13 mm Capacity with MT1 Morse Taper 1 Arbor & Key for Lathe Tailstock Drill Press
Product description
Jacobs drill chuck with KK key, mounted on an MT1 / Morse Taper #1 arbor. Keyed Drill Chuck, Mounting Type 1/2-20. Includes Jacobs key, may be thumb or T style, as available.
- Jacobs 1.5mm - 13mm 3/64" - 1/2" capacity drill chuck
- Morse Taper #1 threaded arbor
- Includes Jacobs key, may be thumb or T style, as available.
- Ships Fast - Next Day Shipping
Atlas 10" Craftsman 12" Lathe Jacobs 33 Drill Chuck 1/2" Capacity with MT2 Morse Taper 2 for Tailstock Arbor
Product description
Jacobs 33BA drill chuck with K32 key, mounted on a Threaded MT2 / Morse Taper #2 arbor. Keyed Drill Chuck, Medium Duty, Bearing Type Plain Bearing, Key Number K32, Closed Length 3.09 In, Open Length 2.43 In, Chuck Diameter 1.79 In, Capacity Max. 0.500 In, Capacity Min. 0.08 In, Construction Steel
- Jacobs 1/2" capacity drill chuck
- Morse Taper #2 threaded arbor
- Jacobs K32 key
- Tailstock chuck for Atlas 10" Metal Lathe, Craftsman 10" and 12" Metal Lathes
- Ships Fast - Next Day Shipping
1/32"- 1/2" Heavy Duty Drill Chuck with Chuck Key and MT2 Arbor JT6
Product description
Brand new Capacity 1/32" to 1/2" Chuck input taper is JT6 - Jacobs Taper 6 compatible Arbor is JT6 on the chuck side and MT2 - Morse taper #2 compatible on the Lathe / Drill press side Knurled body offers superior grip over standard chucks Key included
- Drill Chuck Capacity 1/32" to 1/2"
- MT2 Taper - Arbour JT6 ( Jacob Taper)
- Perfect for Metal and Wood Lathes.
- With One Key !
Jacobs Chuck 30233 Ball Bearing Taper Mount Chuck, 0.75" Maximum Capacity, 3-1/64" Sleeve Diameter, 5-1/8" Close Length
Jacobs
Product description
Jacobs Chuck ball bearing taper mount chuck. One-piece sleeve eliminates crack between driving teeth often found in other designs. Through-hardened sleeve teeth plus hardened nose and keyholes provide outstanding wear resistance. TIR 0.003-inches maximum at half capacity. 0.04-inches minimum and 0.75-inches maximum capacity. 4JT mount and K4 key number. 5-1/8-inches close and 3-61/64-inches open length. 3-1/64-inches sleeve diameter.
- Ball bearing taper mount chuck
- Ball bearing construction maximizes gripping force and drilling accuracy
- Jaws center-ground for straightness and alignment
- Fluted sleeve standard
- Each chuck 100 percent inspected for performance and precision
User questions & answers
| Question: | does the Jacobs Chuck 30233 come with a key |
| Answer: | We include a key, but I've seen sellers on Amazon ship chucks without a key. |
1/8" - 5/8" Drill Chuck with Chuck Key & MT2-B18 Arbor Heavy Duty
- ●NO VIBRATIONS - The machining on the chuck is exceptional and well-balanced, no wobble.
- ●SMOOTH OPERATION - The weight and size can provide plenty of heft and holding power.
- ●2MT - B18 ARBOR - Made of precision ground, high grade tool steel.Morse Taper #2 (2MT) to Jacobs Taper #18 (B18),Long end is 2MT, short end is B18
- ●SPECIFICATIONS - Clamping Range: 1/8" - 5/8" Chuck Overall Length: 3.7in/93mm Shank Diameter: 2.2in/57mm Material: Carbide Steel
- ●Please make sure the model you need is Heavy Duty type, not fit for lightweight drill chuck.
User questions & answers
| Question: | What is the length of the chuck closed |
| Answer: | if by closed you mean the 3 jaws are fully extended it's 3 1/2 inches |
| Question: | Will this work on duracraft |
| Answer: | The chuck should work, if your drill press is compatible with a Taper arbor #18 (B18),Long end is 2MT, short end is B18. Thanks and good luck ! |
| Question: | What size is the shank at the small end |
| Answer: | Small end is .48764 Large end is .5590 |
| Question: | What is runout at chuck |
| Answer: | Less than .0001 |
Product features
Heavy Duty Drill Chuck
- NO VIBRATIONS - The machining on the chuck is exceptional and well-balanced, no wobble.
- SMOOTH OPERATION - The weight and size can provide plenty of heft and holding power.
2MT - B18 Arbor
- Made of precision ground, high grade tool steel
- Morse Taper #2 (2MT) to Jacobs Taper #18 (B18), Long end is 2MT, short end is B18
Chuck Key
The taper is precisely milled and no slippage.
SPECIFICATIONS
- Clamping Range: 1/8" - 5/8"
- Chuck Overall Length: 3.7in/93mm
- Shank Diameter: 2.2in/57mm
- Material: Carbide Steel
- Chuck Mount: B18
Latest Reviews
View all
Swaddle Blankets
- Updated: 12.04.2023
- Read reviews
Mic Microphones
- Updated: 30.04.2023
- Read reviews
Loved Recipes Taste Of Homes
- Updated: 22.02.2023
- Read reviews
Onkyo Speakers
- Updated: 30.04.2023
- Read reviews
Sun Laundry Soaps
- Updated: 08.06.2023
- Read reviews