14 best drill driver bit set

Product description

DEWALT DWA2T40IR 40 Piece Impact Ready Screw driving Set is part of the DEWALT Flexor line of power tool accessories. Flexor allows bits to flex up to 15 degrees which equals increased durability and reduced breakage for longer bit life. This set allows you to maximize you Impact ready system. It features a 10x Magnetic Screw Lock System for strong fastener retention and is preferred by professionals everywhere. The bits are placed directly in the impact driver; No run out and allows for access areas. It also minimizes drops and reduces wobbling. This set features a full range of sizes, from 2 inch to 6 inch screw driving bits and are removable to be used across a full bit set. These bits are durable and jobsite tough. Set includes: 3/8" Untested, 1/4" Untested, 5/16" Untested, Impact Ready Sleeve, 3" Impact Ready Screw Lock Holder, 2" PH2 Impact Ready Bits, 2" SQ2 Impact Ready Bit, 2" T25 Impact Ready Bit, 2" SL8 Impact Ready Bit, 1" PH2 Bits, 1" SL8 Impact Ready Bits, 1" SL6 Impact Ready Bit, 1" PH1 Impact Ready Bit, 1" PH3 Impact Ready Bit, 1" SL10 Impact Ready Bit, 1" PH2, 1" T15 Impact Ready Bit, 1" T20 Impact Ready Bit, 1" T25 Impact Ready Bit, 1" T30 Impact Ready Bit, 1" SQ2 Impact Ready Bits, 1" SQ3 Impact Ready Bit, 1" SQ1 Impact Ready Bit, 3.5" PH2 Impact Ready Bit.

• Minimizes drops
• Reduces wobbles & breakage
• FlexTorq allows bits to flex up to 15 degrees
• 10x magnetic screw lock system
• Minimizes drops and reduces wobbling
• Reduces breakage and longer life

User questions & answers

Question:	Can I use this with regular drill (not an impact driver
Answer:	YEP! In fact, I use the speed loader to make using my regular drill/driver faster. The Magnet holds the different bits I'm going between.
Question:	are the individual bits magnetic
Answer:	The individual bits are not magnetic. The 1/4' and 5/16" adapters, the bit extender, and of course the magnetic screw holder are. If you use any of these (except the 5/16" adapter) with the bits, then the bits will exhibit magnetic characteristics as well.
Question:	where is made
Answer:	Holder and socket adapter made in Taiwan. The rest is made in Vietnam.
Question:	This may sound really dumb, but how does one remove a bit from the magnetic holder that was in its own bubble, the "magnetic screw lock sleeve
Answer:	I just got mine today. That bit pulls out from the back. I had to wiggle it around quite a bit, and then it came out. It gets easier after you do it a few times. It took me a minute to figure out how to use it. The bits push in from the back, you only use the long bits. It only made sense once I put it in my screw gun. The sleeve slides back on the bit enough to expose the tip. Then you can put a screw on it, and the magnet/sleeve holds the screw in place. That's their theory at least lol. I haven't tried it yet. It seems a little awkward, but I guess you could get used to it if you're putting in a bunch of screws.

Product features

DEWALT DWA2T40IR Impact Ready FlexTorq Screw Driving Set, 40-Piece

Designed for tough jobsite duties, the Impact Ready bits deliver the power, precision and dependability required to handle even the toughest jobs. Complete with an assortment of various bit tips and sizes commonly used on the jobsite, this bit set is the ultimate resource for any handyman, professional or DIYer.

Product description

The DEWALT DW2166 45-piece screw-driving set with tough case includes the most commonly used screwdriver accessories. It has Philips, square, slotted and double-ended screwdriver bits. The industrial-strength case they come in is durable and provides organization, portability and protection of the bits. The DEWALT 45-Piece Screwdriving Set includes the most commonly used screwdriver accessories. The industrial-strength case is strong and durable. The set includes Phillips, square, slotted, and double-ended bits.

From the Manufacturer

The DEWALT 45-Piece Screwdriving Set includes the most commonly used screwdriver accessories. The industrial-strength case is strong and durable. The set includes Phillips, square, slotted, and double-ended bits.

• Value: Dollar 40 value vs. purchasing separately
• Bit retention: Tough case container bit retention system keeps bits secure
• Magnetic drive guide: Magnetic drive guide reduces stripping and wobbling
• Bit fit: Includes 12 double ended bits
• Bit tip count: 54 total tips. Clip latch for secure closing
• Steel bits: Hardened steel screwdriver bits
• Durable case: Comes in a strong and durable case

User questions & answers

Question:	Are these strong enough to not strip after being used multiple times? I feel mine always do with just a few uses
Answer:	They are hardened steel. I've used mine on some screws with stripped heads (which would have chewed up the bit if it hadn't been hardened steel). They are hardened and they don't get chewed up. I've had no issues with mine.
Question:	Do u have to have a drill
Answer:	You could probably put it in a Yankee but the drill would be much more up to date.
Question:	Will the bits fit your standard electric drill? My drill is nit a DeWalt brand. Thank you
Answer:	Yes, they will BUT, these aren't really designed for use in an electric drill, these are designed for use in 1/4" hex bit screwdrivers primarily.
Question:	What's the trick in getting these bits back into their plastic holding place? It seems to only bend the plastic
Answer:	Contrary to some answers, the case is very well designed and there is a very simple way of getting the bits back into the case. All you have to do is turn the bit with the flat sides to either side (pointy side to the front , back) then slide it down into the empty slotted area; there should be no resistance if done correctly. The simply push the bits back down seating it into the holder. It's as simple as that.

Product features

DEWALT DW2166 45-Piece Screwdriving Set With Tough Case

The DEWALT 45-Piece Screwdriving Set includes the most commonly used screwdriver accessories. It has Philips, square, slotted and double-ended bits. The industrial-strength case they come in is durable and provides organization, portability and protection of the bits.

• ULTIMATE SET: 208 Pieces including Nut Drivers, Security Bits, Torx, Slotted, Phillips, and other Specialty Bits in commonly used sizes.
• BUILT FOR WORK: Made of high grade carbon steel (50BV30 & 6150 Grade), sand blasted bits that are made to last.
• PRACTICAL: Comes in a hard plastic case and includes multiples of the most common bit sizes so you can keep working. Labeled slots to keep bits organized.
• QUICK CHANGE: adapter included to allow fast changes between sizes.
• GUARANTEED: Try our Jackson Palmer Driver Bit Set with NO RISK and 100% Money Back - No Questions Asked.

User questions & answers

Question:	Why no triangle bits. worthless. i dont need 100 flat and phillips fml
Answer:	It does list all of the included bits.
Question:	Will it work with impact driver
Answer:	This is designed to work with any version of drills. Is does not come with an adapter for a impact driver.
Question:	Does it work with an ikea fixa screwdriver
Answer:	Very likley
Question:	Are the bits magnetic
Answer:	The bits themselves are not. Nor should they be. Use a magnetic bit holder and you're in business.

Product features

Jackson Palmer 208 Piece Ultimate Screwdriver Bit Set

Made of sand-blasted high grade carbon steel, these bits are built to stand up to any project. Quick change adapter is included for fast switching between sizes. Each set includes:

Product description

IMPACT READY accessories deliver exceptional performance for extreme torque applications. FlexTorq bits feature an Extended FlexTorq Zone to transfer optimal torque in hard joint applications, providing durability & longer life. The bit tip is CNC machined for a precise fit, reducing cam-out under torque.

• Connectable accessory storage system to optimize storage space
• Clear lid allows you to easily see contents at glance
• Small Bulk Storage size fits inside the Small and Medium ToughCase+ (sold separately) - Ideal for organizing loose bits
• Extended FlexTorq Zone* transfers optimal torque
• Patented bit-bar design allows easy removal of bits and customizable placement

Product description

SHOCKWAVE DRILL & DRIVE SET 40PC . Milwaukee Electric Tool 48-32-4006 40PC Shockwave Bit Set features a Geometric design that Provides Shock absorption, Proprietary Steel and Heat Treat Process For Maximum Strength and Durability, Forged Tips For Maximum Grip, Set Includes: 1 Insert 1/2" Socket adapter, One 1/4" Magnetic Nut Driver, One 1/4" Shockwave Hex Drive Bit, One 1/8" Drill Bit, One 3/16" Shockwave Hex Drive Bit, One 3/8" Magnetic Nut Driver, One 3/8" Socket adapter, One 5/16" Magnetic Nut Driver, 1 Shockwave Compact Magnetic Bit Holder, 1 Hex Bit 1" 1/4", 1 Hex Bit 1" 1/8", 1 Hex Bit 1" 3/16", 1 Hex Bit 1" 5/32", 1 Phillips Bit 1" P1, 2 Phillips Bit 1" P2, 1 Phillips Bit 1" P3, 4 Phillips Bit 2" P2, 1 Phillips Bit 2" P3, 1 Phillips Reduced 1" PR2 Bit, 1 Slotted 1" #10 Bit, 1 Slotted 1" #8 Bit, 1 Slotted 2" #10 Bit, 1 Square Bit 1"SQ1, 2 Square Bit 1" SQ2, 1 Square Bit 1" SQ3, 1 Square Bit 2" SQ2, 1 Square Bit 2" SQ3, 1 Torx Bit 1"T15, 1 Torx Bit 1" T20, 2 Torx Bit 1" T25, 1 Torx Bit 2" T20 and 2 Torx Bit 2" T25. Product Description

• Geometric design provides the shock absorption
• Forged tips for maximum grip
• Proprietary steel and heat treated process for maximum strength and durability

User questions & answers

Question:	Will these work on my M18 fuel hammer drill
Answer:	This is probably the best blade on the retail market. It's made to cut porcelain (which is much harder than marble) and will handle marble or granite no problem.
Question:	Can I use the drill bit with hammer drill for drilling into concrete
Answer:	5/8”. Standard arbor. Haven’t seen any other size advertised.
Question:	what are the torque ratings for the 3/8 and 1/2 inch adapters
Answer:	Yes I have, Cuts like butter. Brick pavers are not as dense as a material like porcelain just thicker. You won't win any speed races but it gets the job done very well. Still needs to be on a wet saw though.
Question:	Are these accessories compatible with M12 tools
Answer:	It will with a glass blade on it.

Product description

The RYOBI 101-Piece Drill and Drive Set is uniquely designed with a variety of bits to cover a wide range of applications. This set is great for drilling into wood, metal, plastic, and masonry. The Black Oxide Bits included provide a longer life. The 1 in. bits fit perfectly into the Magnetic Bit holder for added control. These go-to staples, accompanied by a variety of brad-point bits, and masonry bits ensure you have the perfect accessory for every project. All bits are conveniently stored in a versatile case.

• Includes: (23) Hex, (20) Torx, (16) Phillips, (12) Slotted, (11) Square, Black Oxide Drill Bit, Brad-point, Masonry, Magnetic Bit Holder, and Case
• Perfect for drilling into wood, plastic, metal, and masonry
• Includes: Bit Holder, Black Oxide, Wood Drilling & Driving Bits
• Included case for easy, convenient storage

Product description

The Bosch custom case system is compatible with impact tough driver bits and drill bits, delivering the best case for the best bits. These bits are impact rated and have been designed to handle the additional torque of today's impact drivers. With the xtended torsion zone, the driver bits have been upgraded to deliver 10x life over standard impact bits. The xtended torsion zone absorbs torque peaks to reduce stress at the bit tips. The black Oxide drill bits provide longer life than standard drill bits, thanks to their tip design and black Oxide coating. The durable, well designed case provides tilt in/Tilt Out convenience for easy access to the bits. Since it's Customizable, it helps increase user productivity by reducing time searching for the right bit. This jobsite tough case features a secure case latch and rubber bumpers.

• IMPACT RATED: Featuring the Bosch Impact Tough bit design so both driver and drill bits are impact rated and provide 10X longer bit life than standard impact bits
• TOUGH: The driver bit Xtended Torsion Zone helps to absorb high torque peaks to reduce stress or breakage of bit tips on new impact drivers
• LONGEVITY: Black oxide coating on drill bits provides lower fiction, along with less heat for long life
• ACCESSIBLE: The included customizable case is designed to be the most straightforward approach to bit organization; The DDMS20 case is durable, and uniquely designed with a tilt in/tilt out case mechanism allowing easier access to the bit you need
• DURABLE: The case includes rubber bumpers to provide durability and a secure latch ensures security while bringing along from job site to job site

User questions & answers

Question:	Why wont bits fit in the adapter
Answer:	This blade was meant for stone/tile type materials, but if you have a light gauge metal (wire mesh/alum siding) it will probably do in a bind. But I would not recommend it for heavy gauge metals (steel door/iron bars etc; you will need a metal cutting blade instead).
Question:	What bit do i need to use with self-tapping screws with hex heads? and does this it come with it
Answer:	Did you ever find a good blade to cut agate?
Question:	I can buy an empty bosch custom case. great! but where can i find and buy empty bosch custom case clips? i found nothing on the bosch website
Answer:	I have used it with both ceramic and porcelain tile and it worked well with both.
Question:	Are the bits magnetic
Answer:	Absolutely it will. It is important that you use a piece of tile or plywood underneath to create a perfect slot for the blade. I use it on the dewalt wet saw and there is way to big of a gap between the sliding tray and blade, use a porcellan or stone tile underneath your 1/8" glass.

Product features

Drill Bits Provide Clean Starts and Long Life

Bosch's Impact Tough Black Oxide Drill Bits feature split points for clean, accurate starts. They have impact-rated shanks, and are coated with black oxide for lower friction and longer life.

Innovative, Customizable System for How You Work

The Custom Case System allows you to customize configurations so you always have the right bit at hand. The removable clips let you take only the bits needed for a job instead of the whole tackle box.

Custom Case for Durability and Convenience

Made with a secure latch and tough rubber bumpers, this durable case is designed with a tilt-in/tilt-out case mechanism allowing easy access to the bit you need. It’s the best case for the best bits.

Impact-Rated Driver Bits Deliver 10X Longer Life

The pre-filled case features Bosch Impact Tough driver bits, with an Xtended Torsion Zone to reduce breakage. They also have hex shanks for use in high-torque impact drivers, as well as drill/drivers.

Product description

The DEWALT DCK240C2 20v Lithium Drill Driver/Impact Combo Kit (1.5Ah) is comprised of the DCF885 20V MAX Lithium-Ion 1/4 inch Impact Driver which is compact (5.55" front to back) and lightweight (2.8 lbs.), designed to fit into tight areas. This unit offers one-handed loading 1/4" hex chuck accepts 1" bit tips, and also features a 3 LED light ring with 20 second delay to provide visibility without shadows. A belt hook is also included for portability on the worksite. The DCD771C2 20V MAX Lithium-Ion Compact Drill/Driver is also compact and lightweight, designed to fit into tight areas. This drill/driver offers a high performance motor that delivers 300 unit watts out (UWO) of power ability, which allows for a wide range of applications. This unit also features a high speed transmission that delivers 2 speeds (0-450 and 1,500 rpm) for a range of fastening and drilling applications. The 1/2" single sleeve ratcheting chuck provides tight bit gripping strength, and the ergonomic handle delivers comfort and control. Both tools are part of the DEWALT 20-Volt MAX system and are compatible with all 20-Volt MAX batteries, chargers and accessories. Includes: DCF885 20v MAX Lithium Impact Driver, and DCD771 20v MAX Lithium Drill/Driver, 20-Volt MAX lithium-ion 1.5Ah battery packs, 20-Volt MAX charger and contractor bag.

• Ergonomic Design: Lightweight tools designed to fit the user’s needs
• Increased Visibility: The DCF885 features a built in Led with 20 second delay after trigger release
• Includes: DCD771 drill/driver, DCF885 1/4 inches impact driver, 20V MAX Lithium Ion 1.3 Ah battery packs, 20 volt MAX charger, and kit bag
• 1 Handed Bit Loading: The DCF885 has a 1/4 inches hex chuck and accepts 1 inches bit tips, Power Tool Type: Cordless
• High Performance Motor: The DCD771 delivers 300 Unit Watts Out (UWO) of power ability completing a wide range of applications

User questions & answers

Question:	Hello from pensacola florida my question is can this thing take off a tire if not can you point me to on that dose thanks
Answer:	In the shop I use my 3/8 impact wrench from dewalt with a 20v 5ah battery and i can go almost 2 days before having to charge my battery and i use it for almost everything. It will take off tires, pull headbolts, engine mounts, t-case bolts, and so on. I would recommend if you're working on your vehicle getting the impact wrench with impact sockets. I put about $500 into what i use and it hasn't let me down yet in almost 4 years. With the wrench you won't need the adapter from screw bit to socket so that will save you a headache if you loose it.
Question:	How many inch pounds will this impact driver provide
Answer:	This impact has almost 1500 in-lbs of torque. Very good impact and you can beat the hell out of them they definitely last.
Question:	Does it come with 2 batteries
Answer:	Yes it comes with two batteries
Question:	Does the drill have a hammer setting
Answer:	The drill combo with the hammer setting is DCK299. However, I will say I thought I needed a hammer drill, it turns out it’s useless. An impact drill gives pulses of force laterally (in the direction of rotation) to turn big bolts, a hammerdrill delivers the same force forward. It turns out that this force is so minimal it’s basically useless. If you actually need a hammer drill what you really need is a rotary hammer. Much greater forward bang. A hammer drill is a bit like a vibrating razor. Only useful in masonry and then it goes just as fast without.

Product features

20V MAX* Compact Drill/Driver

Has an ergonomic handle and one-handed loading 1/4-in. hex chuck that accepts 1-in. bit tips.

20V MAX* 1/4-in. Impact Driver

Compact for fitting in tight spaces and increasing productivity. Three LED lights make it ideal for working in the dark.

Product description

Get one convenient set of bits and sockets for drilling, driving and fastening in one convenient carrying case with the Makita 75-piece metric drill and screw bit set (B-49373). The set includes bits for drilling into metal, wood and masonry materials as well as insert and power bits for fastening applications. Fastening applications are covered with an assortment of Phillips, Pozidriv, Torx, slotted and hex insert bits. The set also includes titanium nitride coated high-speed steel (HSS-tin) metal and wood drill bits, brad point wood drill bits, and masonry hammer drill bits with straight shank for use with most 3/8” and ½” drills. The kit also includes a center punch, ¼” hex countersink, ¼” hex Nut drivers, and a ¼” hex magnetic bit holder.

• Includes bits for drilling into metal, wood and masonry materials as well as insert and power bits for fastening applications
• Includes Phillips, Pozidriv, Torx and slotted insert bits
• Includes Phillips, Pozidriv, Torx, slotted, and hex power bits
• Includes (19) titanium nitride coated high speed steel (HSS tin) metal and wood drill bits with size range of (1 - 8 millimetre)
• Includes Brad point wood drill bits with size range of (4 - 8 millimetre)

User questions & answers

Question:	Hello, can you ship to Israel
Answer:	I'm traveling to Israel in February. I'll bring one with me. Meet me at the airport.
Question:	will this product work the makita TD090D impact drill
Answer:	no it,s made for drill,no impact drill
Question:	Is there an imperial unit version of this kit
Answer:	If there is I wish I'd bought that one.
Question:	where is it made
Answer:	The set is all made in China. The screwdriver bits are tempered to be very hard and tough. They’re outlasting many of my industrial brand bits and are among the best for finish quality of any bit’s I own. They’re very well made and the quality control is great. The twist drill bits are very good and though not quite as well made as expensive industrial quality drill bits, they’re a good value in my opinion and are holding up well to mild steel drilling.

Product features

Makita B-49373 75 PC Metric Drill and Screw Bit Set

Makita B-49373 is so convenient that it will solve all your maintenance queries in a jiffy. The wide range of 75 Pc. comprises Drill set for drilling into every possible materials such as metal, wood, cement walls etc. It also includes Inserted Bits and Power Bits for fixing and fastening.

Less time, more job done

With the Makita tool kit by your side, you are sure to get your work done. As the kit comes with an option of different tools, it saves you the effort of having multiple tool kits for different maintenance jobs. As all your drill and screw bits are organized in one place, you just have to focus on the job in hand without worrying about searching for the correct screw bit. It is built to endure any kind of tough task.

Easy to Carry and Use

As the multi-bit set comes with a portable case you can carry it anywhere you go. As it offers a wide range of insert bits and power bits that is compactly packed in an easy to carry box, it is just the perfect companion in your emergencies.

Perfect gift for new homeowner

Setting up a new home is never easy. With so many setting up jobs at hand, one needs that one kit that is compact, easy to carry yet utilitarian. The Metric Drill And Screw Bit Set is one such gift that is going to come handy while running errands of the initial setup.

Product description

DEWALT's titanium drill bits have a titanium coating that provides longer life when drilling in non-ferrous metals. These bits are also suitable for drilling in wood and plastic and are ideal for commercial and residential applications. Includes sizes from 1/6 inch to 1/2 inch in a plastic tough case.

• Titanium pilot point for longer bit life
• Starts on contact for cleaner holes
• No spin shanks. Clip latch for secure closing
• Tapered web provides greater durability to reduce breaking
• Includes sizes from 1/16 inch to 1/2 inch in a plastic tough case

User questions & answers

Question:	can the bits be used on metal and wood
Answer:	Yes they can be used on both metal and wood, but depends on what kind of metal. The description says that they provide longer life when used with "non-ferrous" (non-magnetic) metals (such as aluminum). The bits would wear out fairly quickly if used on other types of metals.
Question:	Can these be used to drill in concrete
Answer:	Not a concrete drill. Not much of a drill at all from the couple of times I have used these. Drill one hole and the tip is GONE! Terrible product.
Question:	would using cutting fluid for drilling into
Answer:	When drilling into metal especially thick metal. Cutting oil is always recommended. Unless you have several drill bits to ruin laying around.
Question:	are these hex shank bits
Answer:	Of the 4 sets in this kit, 3 sets are hex shank. DEWALT DWA2FTS100 Screwdriving and Drilling Set, 100 Piece AMZN reuses questions and answers on similar items.

Product description

Drill through wood, plastic, or metal with our 21-piece titanium drill bit set. The titanium corrosion resistant coating protects against rust and wear, and every bit is engineered to keep a sharp edge through heavy-duty use. Our specially designed split point provides precise hole placement and clean, burr-free holes. CRAFTSMAN hex-shank titanium bits eliminate bit slippage in wood, metal, or plastic.

• 1/4" Hex shank bits compatible with impact drivers, CRAFTSMAN 3" Locking magnetic holder and 1/2" Drill/drivers
• Corrosion resistant Titanium coated drill bits promotes longer life
• Split point provides precise hole placement and clean, burr-free holes
• Screw drives bits constructed with shock-resistant tool steel for maximum durability

User questions & answers

Question:	Will this case connect together with a dewalt "tough case +" case
Answer:	No
Question:	Is it compatible with Craftman model no
Answer:	The bits in this set are 1/4 hex shank and should fit the in 315.113980
Question:	Comes with adapter
Answer:	Yes.
Question:	Will these drill bits stay in a magnetic holder? Reported have aluminum shank
Answer:	Yes. The CMAM3211 comes with a 3-in locking magnetic holder.

• HSS Titanium Coating - Classic HSS construction with titanium coating for capability and durability. The cutting edge is hardened and honed for sharpness, chatter-free design with staggered cutting teeth ensure the precise countersinking and hole smooth clean.
• Flutes Form - 2 flutes form helps clear chips and debris away from the bit, decreasing friction and heat for a faster, cooler drilling process.
• Quick Change - 1/4 inch hex shank fits into all power tools more easily and securely, specially for locking into quick change chuck.
• Meet Your Demands - Great drill bits set for metal/wood/plastic countersink. Suitable for Home DIY, and General Building/Engineering Use.
• Organized Holder - A drill bits holder with size index is included in the set for easy storage and organizing. The drill bits set fits the majority of brands currently on the market.

User questions & answers

Question:	Will these work on Tacklife cordless drill
Answer:	Yes, very good the will not spin on drill chuck.
Question:	Does this work with a dewalt 20v max and can it drill through metal
Answer:	I should work fine with your drill either chucked or with a snap adapter. I have used mine in wood and aluminum with very good results but have not tried with steel.
Question:	Are they just for aluminium? Are they designed for soft steel
Answer:	No you can use them on wood, steel, aluminum, plastics and just about everything.
Question:	Could I use one of these bits to drill holes for mounting taxidermy birds
Answer:	Yes, but avoid using them to drill peep holes into the adjoining motel room.

Product features

COMOWARE Titanium Twist Drill Bit Set

Material: HSS , Titanium Coating

Angle Point: 135 Degree

Flute Type: Spiral

Shank Type: Hex Shank

Product description

30-piece IMPACT READY FlexTorq screwdriving set;37-piece screwdriving set with Tough Case;19-piece screwdriving set with Tough Case;14-piece gold ferrous Pilot Point drilling set;Features some of DEWALT's most popular bits that cover an array of uses

• 30-piece IMPACT READY FlexTorq screwdriving set
• 37-piece screwdriving set with Tough Case
• 19-piece screwdriving set with Tough Case
• 14-piece gold ferrous Pilot Point drilling set
• Features some of DEWALT's most popular bits that cover an array of uses

User questions & answers

Question:	The dwa2fts100 14 pc drilling set requires an adjustable chuck. my d3f815 cordless impact drill has no adjustable chuck, hence the bits are useless
Answer:	try amazon
Question:	Does this set include a socket attachment
Answer:	No, a socket attachment is not included.
Question:	Are these bits magnetic
Answer:	Some of the bits included are magnetic. Please access the link provided and scroll to the bottom to locate the individual magnetic parts in each kit.http://www.amazon.com/DEWALT-DWA2FTS100-Screwdriving-Drilling-Piece/dp/B00VQCBTXS
Question:	are the drill bits good for metal? stainless steel
Answer:	I have only used the 1/4" bit so far. I drilled 4 holes in thru 3/8" flat galvanized steel plate with a 1/2" battery drill. The 1/4" drill bit did just fine for me.

Product features

DEWALT DWA2FTS100 Screwdriving and Drilling Set, 100-Piece

The DWA2FTS100 100-piece screwdriving and drilling set features some of DEWALT's most popular bits that cover an array of uses. This set includes 30 pieces of DEWALT's IMPACT READY FlexTorq screwdriving bits which are ideal for use in impact drivers and drill/drivers. The set also features 14 pieces of DEWALT's gold ferrous Pilot Point drilling bits with Pilot Point tips that start on contact for clean, accurate holes and reduce lock-up on breakthrough, along with No-Spin shanks which eliminate the frustration of bits spinning in the chuck. To round out the set, there are 56 pieces that include DEWALT's most common screwdriving bits, along with a compact magnetic drive guide. These screwdriving bits are heat treated for long life, with a heavy-duty magnet that keeps bits in place, and a bit retention system to keep bits secure.

IMPACT READY FlexTorq Screwdriving Set, 30-Piece

DEWALT FlexTorq screwdriving bits are the perfect way to maximize your DEWALT power tool system. Featuring the 10X Magnetic Screw Lock System, the FlexTorq bits are ideal for use in impact drivers and drill/drivers. Each bit features a precision-machined tip for ideal fit in screw-head recesses, resulting in fewer stripped screws. The Magnetic Screw Lock System holders and sleeve feature a floating ring magnet for fastener retention.

Set includes:

aluminum ring magnet collar

2-inch SS magnetic bit tip holder

1-inch bit tips: PH1; PH2; PH3; SQ1; SQ2; SQ3; SL6; SL8; SL10; T20; T25; T27

2-inch power bits: PH2; SQ2; T25

Screwdriving Set with Tough Case, 37-Piece

This screwdriving set includes 37 pieces:

1-inch bit tips: PH1; PH2; PH3; SL6; SL8; SL10; T15; T20; T25; SQ1; SQ2; SQ3.

2-inch power bits: PH2; T25; SQ2

Nut drivers: 1/4"; 5/16"

Screwdriving Set with Tough Case, 19-Piece

This screwdriving set includes 19 pieces:

compact magnetic drive guide

1-inch bit tips: PH1; PH2; PH3; SL6; T25; SQ2

2-inch power bits: PH2; PH1; T25; PH3

3.5-inch power bits: PH2; SL6; SQ2

Gold Ferrous Pilot Point Drilling Set, 14-Piece

This Pilot Point drilling set includes 14 drill bits:

3/8"; 5/16"; 1/4"; 7/32"

3/16"; 5/32"; 1/8"; 7/64"

3/32"; 5/64"; 1/16"

• ★VERSATILE: 246-pcs drill toolkit includes all the drill bits you need. Perfect for DIY projects and household maintenance and repair. variety of specialist drill bits and accessories for wood, metal, cement, plastic drilling as well as multiple driving and fastening applications.
• ★QUALITY: High-quality drill bits made from superior HSS titanium coated designed for long time usage. Alas, reducing the damage to the screw head.
• ★WELL-ORGANIZED: Full set are well indexed with sponge cushion on both upper and lower halves to keep and protect all components organized. Black Storage Carring Case provided. Portable hard storage case can be conveniently carried to everywhere. Designed in black and orange color which can be easily recognized and easy read.
• ★CONTENTS: 30PCS HSS twist drills with black finish, 57PCS Titanium coated bits, 21PCS Masonry drill bits, 17PCS Wood-boring drill bits, 4PCS Flat wood bits, 1PC Spade bit extension, 6PCS Nutdriver, 66PCS 1" Screwdriver bit, 30PCS 2" Screwdriver bit, 5PCS Hole saws with hole saw adapter, 4PCS Drill stoppers, 2PCS Allen key, 1PC Nail pouch, 1PC Magnetic holder, 1PC Counter sink.
• ★GUARANTEED: Since we are confident in our products and services, please let us know, if for any considerations, you're not 100% satisfied with your purchase, we'll make it best for you.

User questions & answers

Question:	Will these work in a dewalt cordless drill
Answer:	Thank you for your question. We do not recommend using the DB1043S to sharpen blades, this blade is designed for ceramic and slate material. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499)

Product features

Household DIY Indispensable Tool Kit

246PCS CONTENTS:

30PCS HSS twist drills with black finish, 57PCS Titanium coated bits, 21PCS Masonry drill bits, 17PCS Wood-boring drill bits, 4PCS Flat wood bits, 1PC Spade bit extension, 6PCS Nutdriver, 66PCS 1" Screwdriver bit, 30PCS 2" Screwdriver bit, 5PCS Hole saws with hole saw adapter, 4PCS Drill stoppers, 2PCS Allen key, 1PC Nail pouch, 1PC Magnetic holder, 1PC Counter sink.

Black Storage Carring Case provided.

Safety Notice

• 1. This is not a toy. Do not allow children to play with this item.
• 2. Use as intended only. Do not use beyond noted specifications.
• 3. Inspect before use. If you have any question or advice, please write to us through Amazon. We will solve your problems in time.

Did you often DIY at home?

Stop shilly-shallying, Come and take me!

Did you often have a headache when shopping because of the variety of tools?

Stop shilly-shallying, Come and take me!

Did you often fail to buy the right tools?

Stop shilly-shallying, Come and take me!

PREMIUM QUALITY:

High-quality drill bits made from superior HSS titanium coated designed for long time usage.

VERSATILE:

246-pcs drill toolkit includes all the drill bits you need. Perfect for DIY projects and household maintenance and repair. variety of specialist drill bits and accessories for wood, metal, cement, plastic drilling as well as multiple driving and fastening applications.

WELL-ORGANIZED:

Full set are well indexed with sponge cushion on both upper and lower halves to keep and protect all components organized.

BLACK PLASTIC TOOL BOX

Black Storage Carring Case provided. Portable hard storage case can be conveniently carried to everywhere. Designed in black and orange color which can be easily recognized and easy read.