11 best lathes turnings

Product description

1/3 Horsepower bench top lathe with variable speed motor

• Motor: 1/3 HP, 2 Amp, 110V, Single-phase, 60 Hz
• 12-inch distance between centers
• 8-inch swing over bed
• Cast iron construction and infinitely variable speed control
• Includes two tool rests

User questions & answers

Question:	I have a chuck that is 1"-8tpi female thread (nova 48111), it doesn't fit on this lathe. what adapter should i buy
Answer:	Buy a 3/4" 16 TPI to 1" 8 TPI adapter. If you further questions go to http://www.woodturningz.com/downloads/w1704_ds.pdf for the specs on this machine.
Question:	is there an adapter for the face plate for mounting live center chucks? I bought one but won't line up with holes
Answer:	I'm not sure if they make the adapter to mount on the face plat. I have a 2" diameter three jaw,self centering scroll type chuck that i bought from Amazon that ihave used that works great,but i think that the holes in the face plate is for mounting a backing block to the piece of wood stock to turn a bowl. It says in the manual that you glue the block to the wood your turning and use the holes to screw the block on to face plate. Hope this helped.
Question:	What size wood stock can it hold? How about something like 12'' long by 8" wide piece of wood
Answer:	The length it will hold will be dependant upon what chucks you have in the head and tail stock. The bulkier the chucks, the shorter the length it will handle. I'd say it will hold 12" lengths unless your chucks are sizable. I wouldn't try more than 4" width stock unless it was short. Although the lathe may hold the stock, it would be too much for the motor. The intended purpose of this lathe is to make small things like ink pens, Christmas ornaments, small toys like tops or yo-yo's and tool handles etc. If you want to mount 12" X 8" stock you should be looking at full sized lathes.
Question:	is there anyway to secure to a bench
Answer:	Yes. It has has three holes in the base that you can bolt it down with. I bolted mine down on a metal stand. It holds it down real solid. Mine is the Shop Fox W1704 also. It is well built. I really like mine. Hope this helps!

Product features

Shop Fox W1704 Benchtop Wood Lathe

Tackle pen turning or other small cutting or shaping projects using the Shop Fox W1704 bench-top lathe from Woodstock International. Made of cast iron, and designed to fit neatly on a workbench, this lathe features a 1/3-horsepower, variable-speed motor and delivers spindle speeds between 700 and 3,200 revolutions per minute (RPM). It also features a safety paddle switch, an MT No. 1 spur center, an MT No. 1 live center, 4-1/4-inch and 7-inch tool rests, a 5-3/4-inch faceplate, and a 3/4-by-16-inch TPI RH spindle.

Includes Two Tool Rests

The W1704 includes both a 4-1/2 and 7-inch tool rest for various turning applications and with a 13-inch distance between centers and an 8-inch swing over the bed this lathe is ideal for a variety of turning projects.

Variable Speed

The infinitely variable speed from 700-3200 RPM comes in handy when turning hard or soft species of wood.

5-3/4-inch Faceplate Included

This benchtop lathe includes a 5-3/4-inch faceplate which threads onto the headstock spindle for non-spindle turning (usually used for making bowls or other items that cannot be supported from the tailstock).

• 【1/2 HORSE POWER MOTOR】- 1/2 Horse Power motor, Voltage: 120V. The powerful  motor starts softly offering motor's maximize safety and low noise.
• 【4 GRADE SPEEDS】- The adjustable belts can be adjust with ease and accuracy within 3400 RPM, 1100, 1600, 2300, 3400prm available.
• 【LARGE WORK CAPACITY】- 40" (1000mm) distance between centers, Cutting Diameter 14" (350mm). High concentricity. Moving tailstock to adjust proper distances for workpieces.
• 【SOLID STEEL CONSTRUCTION】- Solid steel constructed wood lathes for durability and strength, providing increased stability and smooth operation, reducing vibration.
• 【FREE WRENCHES & CHISELS】- 3 wrenches are for easy using and maintainance. 3 chisels for free also, 1 x Skew Chisel, 1 x Shear Scraper and 1 x Spindle Gouge.

User questions & answers

Question:	Can you do aluminum
Answer:	It was not be cost effective because you would need too many attachments. You’d have to modify the tool rest. It would turn it but you couldn’t hold the tool to turn it without modifications. There are lathes out there built for using with aluminum. Hope this helps
Question:	Will the wen la4444 4-inch 4 jaw self centering chuck set with -inch x 8 tpithread fit this lathe
Answer:	https://www.amazon.com/gp/product/B000KI8CBQ/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 This is what you need
Question:	does this brand and model come in 220 volt
Answer:	Only 110 volts
Question:	What are the minimum and maximum clamping measurements
Answer:	0 to 40 inches

Product features

Powerful Motor

1/2 Horse Power motor, Voltage: 110V, starts softly to offer motor's maximize safety and low noise design.

Variable Speed

Optimally designed speed ranges of 1100-3400 RPM variable speed.

Large Work Capacity

40" (1000mm) distance between centers, swing over bed 14" (350mm). High concentricity.

Accurate & Stable

Steel constructed mini lathes is of increased stability and smooth operation.

7W LED Work Light

3 wrenches are for easy using and maintainance. 3 chisels for easy carving work.

Wide Application

Wood turning lathe, an ideal tool for various operations such as cutting, sanding, knurling, drilling, or deformation.

14 in. x 40 in. Wood Turning Lathe & Variable Speed 3400RPM

Our 14 in. x 40 in. Variable Speed Wood Turning Lathe features variable speed 1100-3400 RPM, a 1/2hp motor. Soft startups ensure safety to both workpieces and the motor. Precise design is perfect for high speed sanding and polishing of finished work.

Product description

Remember when you could turn your own pens? Fill your house with as many pens as you can with the WEN 8-inch by 12-inch variable speed mini wood Lathe. Adjust the variable speed anywhere from 750 to 3200 rotations per minute. The WEN 8-inch by 12-inch variable speed Benchtop wood Lathe features an MT1 spindle and Tailstock taper to tightly grip workpieces, two tool rests (4-1/2 inch and 7 inch) to provide needed support for chisels and tools during operation, and a 3.2-Amp motor to keep things turning. The easy-to-use Lever clamping system makes adjustments to both the tool rest and the Tailstock simple and precise. The WEN wood Lathe also includes a flat wrench, a headstock spur center, A Tailstock cup center, A knockout rod and a 2.3-Inch faceplate for non-spindle work pieces. And, because its a WEN product, your Lathe comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line. Remember when you could turn pens, chess pieces and more? Remember WEN.

• Perfect for pens, bowls, cups, chess pieces, and other small workpieces
• Fits workpieces up to 12 inches long and 8 inches wide
• 3.2-Amp motor provides over 50% more power than most 8-inch wood lathes
• Adjust the soft start variable speed motor anywhere from 750 to 3200 RPM
• Features a 2.3-Inch face plate, an MT1 spindle and tailstock taper, and two interchangeable tool rests

User questions & answers

Question:	Anybody know the thread size for the three tapped mounting holes on the underside of the lathe
Answer:	From their website: Benchtop mounting bolts: 0.30 Inch x 20 TPI (M8 x 1.25 pitch)
Question:	can you use a dedicated pen drilling chuck on this on this model 3420 or will it burn up the motor. I want to drill my blanks with it to
Answer:	I use a drilling chuck for all my pen blanks. As suggested, drill slowly, and frequently pull out the drill to remove shavings, as the blank may overheat and split.
Question:	How long did it take for you to get it? Says it ships in 2 months, with Prime
Answer:	When bought this lathe, they sent me 2. That being said, I got it when they said I would get it.
Question:	I'm interested in buy this lathe, does it run with 220 v or 150v, here were I'm living we run only 220. Waiting for answer, regards
Answer:	110

Product features

WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe

You will now easily be able to fit work pieces up to 12 inches long and 8 inches wide with the WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe. The minimal design is ideal for pens, bowls, cups, chess pieces, and other small work pieces. You will be able to take on larger projects around your home with this tool.

Straightforward, Sturdy and Easy to Operate

With a stunning build quality, the WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe provides sturdy frame for various work pieces. Made from cast iron, features a 2.3 inch face plate, an MT1 spindle and tailstock taper and two interchangeable tool rests for added versatility.

Product features

Your Beginner-Friendly Guide to Woodturning

Want to get started turning? Don't know where to begin? Inside this book, author and expert woodworker Barry Gross provides expert instruction, valuable tips, and common-sense advice that will guide you through a fun-filled turning experience!

Jump into this revised & expanded edition to learn all about the basics of turning tools, fundamentals of sharpening, tips for sanding and finishing, and more.

With Learn to Turn, you'll be turning bowls, pens, birdhouses, and handmade gifts in no time!

Safety

A top priority for every woodturner! From eye, hand, and foot protection to dust control and lathe setup, you'll learn how to operate safely in your workshop and avoid common accidents.

Basic Workshop Tools

Make the most of your space with tips and tricks for optimizing your shop layout. Discover how to choose and operate your lathe, then learn all about other turning tools and accessories, from gouges to faceplates.

Choosing Wood

Learn the pros and cons of bought vs. found wood, how to transform logs into suitable turning material, how to create bowl turning blanks, and much more!

Sharpening Tools

Using dull tools can be dangerous for your projects and yourself! Learn when and how to properly sharpen your tools using a bench grinder.

Sanding and Finishing

Sanding and finishing techniques are key to a well-defined, long-lasting finish for your project. Learn about power sanding, hand sanding, applying finish, spray lacquer, woodturner's finish, EEE cream, and buffing systems.

Getting Ready to Turn

Learn how to turn whether you are making a project using spindle or faceplate turning. Start by mounting the workpiece, then follow the ABCs of tool control: anchor, bevel, and cut. Barry Gross will walk you through every step.

Turning Tool Exercises

Once you have your workpiece mounted, follow step-by-step directions to learn what your turning tools can do. From a roughing gouge to a parting tool, you'll practice important techniques for each essential tool for turning wood.

Spindle Turning Projects

Solidify your skills between centers! Create honey dippers (pictured), fantasy wands, peppermills, and more using the spindle turning method.

Faceplate Turning Projects

Follow the instructions and step-by-step photos to make a natural edge bowl (pictured), end-grain hollow vessel, bangle bracelet, and more! Start with a simple bowl and work your way up in difficulty.

Combination Projects

Learn how to switch back and forth between spindle and faceplate turning techniques to create an ornamental birdhouse, wooden fruit (pictured), and a box with lid. This is a chance to be creative and inventive, take your time, and have fun!

Troubleshooting

"Things happen!" Included in this revised and expanded edition is a special troubleshooting section that offers simple solutions to common turning mistakes. Don't get frustrated; learn how to redesign your project when the unexpected happens!

Product description

10" x 18" Lathe #70-105 was designed specifically at the request of pen turners who wanted a sturdy, dedicated machine for their craft. This scaled-down, basic mini lathe is constructed of cast iron so vibration is not a factor, unlike other lathes made of aluminum. 5 Speed ranges cover the bases for boring barrel holes, roughing out pen billets, turning to shape and finishing. Lathe includes a live center, tool rest, knock-out bar and wrenches.

• Rikon mini lathe: This Rikon mini lathe features a ½ motor that provides ample power for all turning needs. With a 10” swing and 18” between centers, this mini lathe also has a self ejecting tail stock and has easy access to speed change.
• Sturdy and Dedicated: Designed specifically at the request of pen turners who wanted a sturdy, dedicated machine for their craft. This scaled-down, basic mini lathe is made from cast iron, so vibration is not a factor, unlike other lathes made of aluminum.
• 5 speed ranger: This mini lathe has a 5 speed range that covers the bases for boring barrel holes, roughing out pen billets, turning to shape and finishing.
• Includes: This lathe includes a live center, tool rest, knock-out bar, and wrenches.

User questions & answers

Question:	Does the headstock have a morse taper and also the tailstock
Answer:	Yes they are both #2 taper
Question:	Does this lathe have a 1 inch 8tpi
Answer:	yes
Question:	Does Rikon or another manufacturer make a steady rest for this lathe
Answer:	Carter products and Ron Brown's Best (Peacetree), make steady rests suitable for. 10 inch lathes. Carter Products is about $375 and Ron Brown's Best is about $160. I believe either can be adapted to Rikon 105, 10" lathe.
Question:	can a veriabule speed drive add to this lathe
Answer:	You can buy a conversion kit from Penn State. It comes with a new motor and electronics. Note that the lowest speed is 650 vs 500 RPM which is faster that recommended if you use Cole Jaws.

Product description

Ideal chisel kit for turning pens pepper mills spindles bowls and lots more woodturning projects of all sizes Each chisel measures 16-1/4" in length with a 6-1/4" M2 High Speed Steel blade and a 10" hardwood turned handles Set includes chisels 3/16" Parting Tool 5/8" Spear Scraper 1" Skew Chisel 5/8" Skew Chisel 5/8" Round Nose Scraper 1/2" Bowl Gouge 3/4" Spindle Gouge 7/8" Roughing Gouge Includes wooden case for storage and carrying Great for woodworkers woodturners and penturners of all skill levels

From the Manufacturer

We have assembled this 8-piece set to satisfy the majority of your turning needs. It is suitable for turners of all skill levels. It is the ideal kit for turning small pens, spindles, bowls and larger projects. The M2 High Speed Steel 5-1/4-Inch blades outlast high carbon steel 6-to-1 and will give you years of use. The set includes 8 essential chisels: 3/16-Inch Parting Tool, 5/8-Inch Spear Scraper, 1-Inch Skew Chisel, 5/8-Inch Skew Chisel, 5/8-Inch Round nose scraper, 1/2-Inch Bowl Gouge, 3/4-Inch Spindle Gouge, 7/8-Inch Roughing Gouge. It also comes with beautifully turned 10-3/4-Inch hardwood handles in an attractive wood display box

• Ideal chisel kit for turning pens pepper mills spindles bowls and lots more woodturning projects of all sizes
• Each chisel measures 16-1/4" in length with a 6-1/4" M2 High Speed Steel blade and a 10" hardwood turned handles
• Set includes chisels 3/16" Parting Tool 5/8" Spear Scraper 1" Skew Chisel 5/8" Skew Chisel 5/8" Round Nose Scraper 1/2" Bowl Gouge 3/4" Spindle Gouge 7/8" Roughing Gouge
• Includes wooden case for storage and carrying
• Great for woodworkers woodturners and penturners of all skill levels

User questions & answers

Question:	Do i need to have a high speed bench grinder or slow speed
Answer:	Slower is better than higher. Try not to use a wheel that is lower than 80 grit. 100 seems best. If you go up to high, you end up heating the tool too much.
Question:	are these benjamins best
Answer:	Yes, these are the Benjamins Best tools. I'm enjoying them very much.
Question:	What type of grinding wheel should I use to sharpen these chisels, being made with M2 High Speed Steel
Answer:	For scrapers and gouges, I use a belt sander. For skews and bedans I use a wet stone grinder. I use a polishing wheel with emery compound to hone all my blades between sharpenings.
Question:	Are these "Benjamins Best" (as recommended by Wood Magazine)? Description doesn't say
Answer:	My set has "Benjamins Best" stamped right on the handles.

Product features

HSS Wood Lathe Chisel Set

We've assembled this 8 piece set to satisfy the majority of your turning needs suitable for turners of all skill levels. An ideal kit for turning pens or much larger projects on lathes of any size. The set includes 8 essential chisels with beautifully turned hardwood handles packaged in a practical and attractive wood display box.

Product description

Carbide Tip Turning Tools Dimensions:

Overall length: 17”/430mm，Bar length:6.7"/ 170mm，Handle length:10.23"/260mm，Handle diameter：1-1.25"/26-32mm

Packing List：

1 pc Carbide Tipped Rougher Tool – Square 15x15x2.5mm R50°

1 pc Carbide Tipped Detailer Tool – Radius Diamond 10x28mm

1 pc Carbide Tipped Finisher Tool – Round 12mm x 2.5mm -30°

2 pcs Square Carbide Insert 14x14x2.0mm

2 pcs Diamond Carbide Insert 10x28mm

2 pcs Round Carbide Insert 12mm diameter x 2.5mm -30°

4 pcs Screws 4x8mm for round and diamond inserts

2 pcs Screws 6x8mm for square and radius square inserts

3 pcs star key wrench

• ✅ CARBIDE WOODTURNING TOOLS - Our lathe turning tools has greatly simplified wood turning, This set of carbide lathe tools is ideal for turners at any skill level, making woodturning fast and more enjoyable. Each lathe chisel features a carbide tip with multiple sharp edges that can be rotated several times, Just rotate the cutter head ¼ turn for a clean, sharp edge and you are back to turning wood.
• ✅ CARBIDE TURNING TOOLS SET - Premium quality CNC machined from ½” square stainless steel, making them stronger, stiffer and less likely to roll than round shaft tools. Features a square shaft so the flat back can be kept flat on the tool rest and level with the floor
• ✅ ERGONOMICS TOOL HANDLE - Hard and Solid beech wood，Ergonomics design makes it more comfortable while doing turning job. Unlike the aluminum handle wood turning tool on the market which comes with only one handle, which means you have to change out the bar every time you want to switch tools.
• ✅ WOODTURNING TOOLS & ACCESSORIES - Set includes 3 turning tools : rougher tip – Square 15 x 15 x 2.5mm R50, detailer tip – Diamond 10x28m with Radius point , finisher, with extra sets of carbide inserts. Set comes with extra replaceable carbide insert: 3 Sets of indexable Replacement carbide inserts (2pcs Square14 ×14 × 2.0mm，2pcs Round 12 × 2.5mm-30°, 2pcs Diamond 10×28mm with Radius Point) and 3 torx star tip wrenches.
• ✅ SATISFACTION GUARANTEE - Our number one priority is customer satisfaction! If you aren’t happy with your wood turning carbide tool set we offer a no questions asked, 100% money back guarantee.

User questions & answers

Question:	Do you offer replacement carbide tips
Answer:	There are 6 pcs extra carbide tips come with the set, but separate carbide inserts pack (same 6 pcs) will be listed soon on amazon in next month, we will update the purchase info on this page.
Question:	Do you also have a bowl gouge for wood turning
Answer:	Hi , currently we only sell 3 piece set , but we will list more wood turning tools in this year! please add us to your wish list or shopping list so you can find us later . Thank you !
Question:	I need the detailer can I purchase it separately? Do you have other items
Answer:	Hi, Thank you for your interest in our carbide lathe tools. Currently we have only 3 piece set. As you can search on amazon, our price is very competitive, but without comprising on quality ( return the tool set if you are not happy with it) the set includes replacement inserts as you will always need them if you use the carbide tools.
Question:	I need negative rake inserts as well. What size do i need
Answer:	Hi, currently we don’t sell negative rake inserts. If you want to turn the synthetic material like resin or acrylic, simply raise your tool rest so that the cutting edge of the insert is about 1/8 inch above center, present your tool to the blank at a slightly downward angle. Or, Use a roughing gouge till the very end then use carbide for finish cuts.

• Indexable Replacement carbide insert design: matched with Carbide Insert, Indexable give you fresh edge for maximum cutter life. If you need Carbide Replacement Tip Insert , you can find it in our Amazon Store，(Square11 ×11× 2.0mm，Round 12 × 2.5mm-30°，Diamond 10×28mm with Radius Point and 10×32mm with Sharp Point)
• Handle：wood material，Ergonomics design makes it more comfortable while doing turning job
• Easy to use: greatly simplified learning curving when turning,No complicated angles to learn and remember,For all skill levels woodworking enthusiast or DIY，Every tool is beautifully coated for durability
• Package: Set of 3, Plastic case packaging

User questions & answers

Question:	Are these tools small enough to turn pens and pencils with
Answer:	They are definitely capable of small work like pens, etc. I turn miniature plates and bowls, with diameters less than 1 inch, and they perform superbly.
Question:	How due you get replacement cutters
Answer:	It came with some extras and you can order more from almost anywhere for probably around 10 dollars.
Question:	can I use a square radius cutter insert in the square tipped chisel? And if so where can I find inserts for these
Answer:	Yes you can use square radius cutter inserts. We have carbide cutter 11*11*2.0 with R50. Please search the Asin B085QDSXCR in Amazon searching box to find it.
Question:	Where are these manufactured
Answer:	I think they are made in China. I am going to make new handles for mine. the brass ferule came off mine after a little use. Other wise I would say they are a good tool for a lot less. I have made my own bigger ones but did not have time to make these smaller ones.

Product features

Rougher

1.Makes roughing faster, simpler and safer

2.Matching indexable square11 × 11 × 2.0mm carbide inserts

Detailer

1.Perfectly to small intricate detail work, will be used on every turning

2.Matching indexable diamond VEMN160208 and VEMN160202 carbide blades

Turner & Hollower&Finsher

1.Quickly turned and hollowed to the desired shape with this tool

2.Matching indexable 12mm round carbide tipped

8 PCS Carbide Replacement Blades

• 2pcs Round 12mm carbide cutters
• 2pcs Square 11mm carbide inserts
• 2pcs Diamond with radius blades-VEMN160208
• 2pcs Diamond with sharp point blades-VEMN160202

Upgrade stainless steel

100% Solid stainless steel material, stay away from the trouble of rusty

Product description

Two piece HSS Inboard Scraper Set # LCSIDE2. These heavy duty round end inboard side scrapers are equipped with thick, stable blades so you can cut aggressively without vibration. These chisels are ideal for making final cuts inside bowls. The scrapers have a radius designed to easily shear the wood and create a clean smooth finish. Larger Scraper is 19" overall length with a blade 6" long x 1" wide and 3/8" thick. Smaller Scraper is 16" overall length with a blade 6" long x 3/4" wide and 5/16" thick.

From the Manufacturer

A Round Side Cut Scraper blade for turners who prefer to make their own handles. Designed for blending the parallel side wall and the curved bottom of vessels and boxes together. It is excellent for undercutting the rims of small bowls.

• Create a clean, smooth finish with these heavy-duty round end inboard scrapers; Thick, stable blades all you to cut aggressively without vibration
• Blades are made from M2 High Speed Steel
• Larger Scraper: 19" overall length with 6" blade and 13" handle; Blade is 1" wide and 3/8" thick
• Smaller Scraper: 16" overall length with 6" blade and 10" handle; Blade is 3/4" wide and 5/16" thick
• Designed for blending the parallel side wall and the curved bottom of vessels and boxes together; Ideal for deep hollowing and making final cuts inside bowls; Also excellent for undercutting the rim of small bowls

User questions & answers

Question:	Is the steel of Chinese origin
Answer:	Hi, it is around 3db. Thank you.
Question:	Do they come with the handles
Answer:	No. Not at all. In fact, we found it to be no louder than if we spoke loudly naturally. That is our biggest disappointment.
Question:	What does indexable mean
Answer:	Hi, the unit Requires (4) x ‘C’ Batteries because it doesn't have a built-in battery. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PMP23SL for more details. Thank you.
Question:	Has anyone made these a negative rake scrapper
Answer:	You get 1 piece