12 best lathe tools

Product description

Ideal chisel kit for turning pens pepper mills spindles bowls and lots more woodturning projects of all sizes Each chisel measures 16-1/4" in length with a 6-1/4" M2 High Speed Steel blade and a 10" hardwood turned handles Set includes chisels 3/16" Parting Tool 5/8" Spear Scraper 1" Skew Chisel 5/8" Skew Chisel 5/8" Round Nose Scraper 1/2" Bowl Gouge 3/4" Spindle Gouge 7/8" Roughing Gouge Includes wooden case for storage and carrying Great for woodworkers woodturners and penturners of all skill levels

From the Manufacturer

We have assembled this 8-piece set to satisfy the majority of your turning needs. It is suitable for turners of all skill levels. It is the ideal kit for turning small pens, spindles, bowls and larger projects. The M2 High Speed Steel 5-1/4-Inch blades outlast high carbon steel 6-to-1 and will give you years of use. The set includes 8 essential chisels: 3/16-Inch Parting Tool, 5/8-Inch Spear Scraper, 1-Inch Skew Chisel, 5/8-Inch Skew Chisel, 5/8-Inch Round nose scraper, 1/2-Inch Bowl Gouge, 3/4-Inch Spindle Gouge, 7/8-Inch Roughing Gouge. It also comes with beautifully turned 10-3/4-Inch hardwood handles in an attractive wood display box

• Ideal chisel kit for turning pens pepper mills spindles bowls and lots more woodturning projects of all sizes
• Each chisel measures 16-1/4" in length with a 6-1/4" M2 High Speed Steel blade and a 10" hardwood turned handles
• Set includes chisels 3/16" Parting Tool 5/8" Spear Scraper 1" Skew Chisel 5/8" Skew Chisel 5/8" Round Nose Scraper 1/2" Bowl Gouge 3/4" Spindle Gouge 7/8" Roughing Gouge
• Includes wooden case for storage and carrying
• Great for woodworkers woodturners and penturners of all skill levels

User questions & answers

Question:	Do i need to have a high speed bench grinder or slow speed
Answer:	Slower is better than higher. Try not to use a wheel that is lower than 80 grit. 100 seems best. If you go up to high, you end up heating the tool too much.
Question:	are these benjamins best
Answer:	Yes, these are the Benjamins Best tools. I'm enjoying them very much.
Question:	What type of grinding wheel should I use to sharpen these chisels, being made with M2 High Speed Steel
Answer:	For scrapers and gouges, I use a belt sander. For skews and bedans I use a wet stone grinder. I use a polishing wheel with emery compound to hone all my blades between sharpenings.
Question:	Are these "Benjamins Best" (as recommended by Wood Magazine)? Description doesn't say
Answer:	My set has "Benjamins Best" stamped right on the handles.

Product features

HSS Wood Lathe Chisel Set

We've assembled this 8 piece set to satisfy the majority of your turning needs suitable for turners of all skill levels. An ideal kit for turning pens or much larger projects on lathes of any size. The set includes 8 essential chisels with beautifully turned hardwood handles packaged in a practical and attractive wood display box.

• 7 pc Indexable Carbide Turning Tool Set; Shank size: 1/2 inch x 1/2 inch; Overall Length: 4"
• Model of each holder & the original insert: MGEHR08-2J (insert: MGMN200-M); SER0500J11 (insert: 11ER A60); SWGCR08-2J (insert: WCMT22); SCLCR08-2J (insert: CCMT21.5); SCLCL08-2J (insert: CCMT21.5); SDNCN08-2J (insert: DCMT21.5); SDJCR08-2J (insert: DCMT21.5)
• Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size. Typically used for threading, turning, cutoff, parting, part-off, finish turning, facing, external grooving, etc.
• Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action.Insert screw and wrench included;
• *** Insert kit Item#: 2387-2004INSERTS (Sold Separately on Amazon)***

User questions & answers

Question:	what screws dooes this set use
Answer:	AccusizeTools- 7 Pieces/Set 1/2" Indexable Carbide Turning Tool Set in Fitted Box, #2387-2004 includes 7 different tool holders which include 5 different carbide inserts. The Turning tool Kits includes ONE piece each of the carbide inserts installed already. we have every size of these inserts in stock, details as Inserts Carbide insert TiN Coated MGMN-2 Double End Cut-off (#2403-4022) for MGEHR 08-2J; Carbide insert TiN Coated 11ER A60 (#2652-0015) for SER0500J11; Carbide insert CVD Coating CCMT21.51 (#2200-1008) for SCLCR08-2J / SCLCL08-2J​ Carbide insert TiN Coated DCMT21.51 (#2104-1010) for SDNCN08-2J / SDJCR08-2J; Carbide insert TiN Coated WCMT 21.51(#2139-1020) for SWGCR08-2J ; we will list all of those extra inserts 10 ps/ each size per package to amazon.com; you can find them all in stock Amazon.com store if you search the SKU No. #2652-0015 / 2200-1008; 2139-1020; 2104-1010; 2403-4022; thank you
Question:	i want to buy the listed item but am not willing to do so unless i i can buy one box (10 pc) of each of the relevant c6 carbide tips at the same time
Answer:	The inserts that came with it cut aluminum just fine. Be sure to use a cutting oil of some sort, or it will weld to the tip and mar the surface. I just bought Sandvik inserts for the dcmt and ccmt holders, but they're much pricier.
Question:	What inserts can I get for this set to cut aluminum
Answer:	The Turning tool Kits includes ONE piece each of the carbide inserts installed already. we have every size of these inserts instock, details as , Inserts QA08R-20A GTN-2 SER0500H11 11ER AG60 SWGCR08-3 WCMT21.51 SCLCR08-2 CCMT21.51 SCLCL08-2 CCMT21.51 SDNCN08-2 DCMT21.51 SDJCR08-2 DCMT21.51, we will list all of those extra inserts 10 ps/ each size per package to amazon.com today. thank you.
Question:	What insert are needed with this set and where do you find them and does the kit come with extra inserts
Answer:	The Allen key is 4mm standard. Thanks.

Product features

Parameters ( (*** Insert kit Item#: 2387-2004INSERTS (Sold Separately on Amazon))

Specification

The cutting parameter is for reference only.

1/2" x 1/2" Heavy-duty Indexable Grooving & Cut-off Holder, Nickel Plated

• Sold separately
• SKU: 2415-5024
• For shallow precision grooving and profile/copy turning, O-ring, snap-ring, relief grooving and high production
• Opening of wide grooves by plunging and side turning
• Precision clamping and insert indexing accuracy
• Stable under side cutting forces when profile turning
• Maximum stability due to short overhang
• Shank Size (A x H): 1/2" x 1/2"
• Overall Length (L): 4-1/2"

Product description

8PCS HSS Wood Turning Tools w/ Portable Handle

Our lathe tools woodworking feature quality polished wood handles and 60CRV blades, suitable for wood working, lathes, carving projects, etc. Compact and lightweight wood box bring you easy to use and take with.

Chisel Set

1 x Skew Chisel, 2 x Flat Chisel, 2 x Triangular Knife, 3 x Gauge Chisel, 1 x Fan-shaped Head Chisel, 1 x Moon-shaped Head Chisel,

SSH Blades

60CRV blade, heat treated, shrill edge with fine grinding. Blade Length: about 3.9"/100mm

Comfortable Handle

Stained hardwood handles. Ergonomic design and smooth surface. Handle Length: 4.13"/105mm

Tight Connection

Blades and handles are connected tightly by durable brass ferrules.

Portable Box

Wooden case with 2 tight buttons, 2 flexible hinges and grooves for easy storage. Portable handle included.   

Wide Application

Ideal for carving bowls and various woodturning projects on wood lathes.

Specifications

Blade Material: 60CRV

Handle Material: Hardwood

Blade Length: about 3.9"/100mm

Handle Length: 4.13"/105mm

Chrisle Length: 8.46"/215mm

Box Size(LxWxH): 12.4"x9.65"x1.38"/31.5x24.5x3.5cm

Package Content

1 x Skew Chisel(13.75mm)

2 x Flat Chisel (6.25, 12.80)

2 x Triangular Knife (14mm, 16mm)

3 x Gauge Chisel (6, 16, 23mm)

1 x Fan-shaped Head Chisel (7mm)

1 x Arc Chisel (12mm)

1 x Moon-shaped Head Chisel (19 mm)

1 x Wooden Box

• The package includes: 1 x Skew Chisel (13.75mm), 2 x Flat Chisel (6.25, 12.80mm), 2 x Triangular Knife (14mm, 16mm), 3 x Gauge Chisel (6, 16, 23mm), 1 x Fan-shaped Head Chisel (7mm), 1 x Arc Chisel (12mm), 1 x Moon-shaped Head Chisel (19 mm), 1 x Wooden Box. Chrisle Length: 8.46"/215mm
• Accurately pre-sharpened blades are made from 60CRV, Blade Length: about 3.9"/100mm
• Features stained hardwood handles with ergonomic design and smooth surface. Handle Length: 3.5"/90mm. Blades and handles connected tightly by durable brass ferrules
• Wooden box with 2 tight buttons and 2 flexible hinges for storage and carrying. Large foam base offering clean and no-damaged space. Size: 12.4"x9.65"x1.38"/31.5x24.5x3.5cm
• Wood turning tools for lathe are suitable for wood working, lathes, carving projects, etc

Product description

ABOUT THE PRODUCT: This 8 piece set was assembled to meet the majority of your turning needs and is suitable for turners of all skill levels. High Speed Steel Blades outlast your standard carbon blades 6 to 1. Ergonomic Beech Handles offer improved grip and control. Yellowhammer's 8 piece set is a budget-friendly alternative for turners of all skill levels. WHAT'S INCLUDED: 1. 5/8" Shear Scraper 2. 3/16" Parting Tool 3. 5/8" Round Nose Scraper 4. 5/8" Skew Chisel 5. 1" Skew Chisel 6. 1/2" Bowl Gouge 7. 7/8" Roughing Gouge 8. 1" Roughing Gouge 9. Wooden Case for Storage

• 8 ESSENTIAL CHISELS: 1 each of 5/8" Shear Scraper, 3/16" Parting Tool, 5/8" Round Nose Scraper, 5/8" Skew Chisel, 1" Skew Chisel, 1/2" Bowl Gouge, 7/8" Roughing Gouge, 1" Roughing Gouge
• VERSATILE: This 8 piece set was assembled to meet the majority of your turning needs and is suitable for turners of all skill levels.
• HSS BLADES: High Speed Steel Blades outlast your standard carbon blades 6 to 1.
• ERGONOMIC BEECH HANDLES offer improved grip and control
• ECONOMICAL: Yellowhammer's 8 piece set is a budget-friendly alternative for turners of all skill levels.

User questions & answers

Question:	How long are the these tools? I'd like to know both lengths the tool itself and the handle length
Answer:	Tool Length is 16 inches and the Handle Length is approximately 10 inches
Question:	Are these tools made of M2 steel
Answer:	If they are actually made of m2 then there not heat treated or still in a the soft state. I've worked with m2 it's some pretty tough material these are not by any means but I still get decent usage out of them before resharpening. I would say there closer to like a drill rod material maybe softer. Wish I could check the Rockwell for you but alas that's not an option currently. Good luck
Question:	Are these too large to use with an 8X12 mini lathe
Answer:	You should be able to use for large projects. I have a midi 14x18 and they and good for spindles and such. I have a set of mini tools I use for fine detail on pens and such.

Product description

One Each of Yellowhammer’s 1/4” Roughing Gouge, 1/8” Spindle Gouge, 1/4” Round Nose Scraper, 1/4” Parting Tool and 1/4" Skew Chisel which are ideal for Pen Turning and other small detail work on your lathe.

• WHAT’S INCLUDED: One Each of Yellowhammer’s 1/4” Roughing Gouge, 1/8” Spindle Gouge, 1/4” Round Nose Scraper, 1/4” Parting Tool and 1/4" Skew Chisel
• USES: Ideal for Pen Turning and other small detail work on your lathe.
• HSS BLADES: High Speed Steel Blades outlast your standard carbon blades 6 to 1.
• ERGONOMIC BEECH HANDLES offer improved grip and control allowing you to cut aggressively without vibration.
• Yellowhammer's 5 Piece Mini Turning Tool Set is a budget-friendly alternative for turners of all skill levels.

• Combo Set Include: 3 Pieces Wood Turning Tools(Mini Finisher/Rougher/Detailer),Carbide Insert Cutters And Allen Key
• Dimension：Length of Tool Bar 4.72"(120mm) ，Length of wood handle：7.87"（200mm），Overall length 12.6"(320mm)
• Set includes 2pcs Round 12mm carbide cutters, 2pcs Square 11mm carbide cutters and 2pcs Diamond with radius cutters.
• Easy to use:greatly simplified learning curving when turning,No complicated angles to learn and remember,For all skill levels woodworking enthusiast or DIY
• Designed to be kept flat on the tool rest and level to the floor, the YUFUTOL Finisher/Rougher/Detailer will effortlessly hog away massive amounts of material for any woodturning process without the need for sharpening，for wood hobbyist or DIY or carpenter

User questions & answers

Question:	Looking for a swan necked knife that fits my alumium handle yufutol
Answer:	Sorry I can’t help you.
Question:	Where do I find replacement inserts and what size inserts are usable in the cutting tool will 15mm work as well
Answer:	You can find replacements on Amazon. I believe the tools are made for one specific size. I don’t think you can change blades to a different size than what comes on the tool.
Question:	Where's the replacement blades for this tool
Answer:	You can find replacement blades on Amazon. search for Yufutol carbide blades and they have multiple listings. just make sure you are replacing your blades with the same size your tools came with.
Question:	Can they work on brass or aluminum
Answer:	Carbide is used to machine alloy steel, so it should go right throught aluminum or brass. These inserts are designed for wood though, so they may not be ground to the best angle for soft metal. You may not get the finish you desire

Product features

The Finisher - Convenient & Effective

Perfect for small and mid size projects, such as pens, Christmas ornaments, bottle stoppers, handles and bowls.

The Rougher - Make Roughing easier

In addition to roughing you'll notice the Rougher is a great tool for shaping the outside radius of a bowl and for turning beads on spindle turnings.

The Detailer - Intricate Detail Work

As you use this tool you will soon see the wonderful small details that can added to your turnings. It will quickly become one of your favorite tools and used regularly.

come with 6pcs carbide inserts

• Set includes 2pcs Round 12mm carbide cutters, 2pcs Square 11mm carbide cuttes and 2pcs Diamond with radius cutters.
• Combo Set Include: 3 Pieces Wood Turning Tools(Mini Finisher/Rougher/Detailer),Carbide Insert Cutters And Allen Key
• Dimension：Length of Tool Bar 4.72"(120mm) ，Length of wood handle：7.87"（200mm），Overall length 12.6"(320mm)

Product description

Carbide Tip Turning Tools Dimensions:

Overall length: 17”/430mm，Bar length:6.7"/ 170mm，Handle length:10.23"/260mm，Handle diameter：1-1.25"/26-32mm

Packing List：

1 pc Carbide Tipped Rougher Tool – Square 15x15x2.5mm R50°

1 pc Carbide Tipped Detailer Tool – Radius Diamond 10x28mm

1 pc Carbide Tipped Finisher Tool – Round 12mm x 2.5mm -30°

2 pcs Square Carbide Insert 14x14x2.0mm

2 pcs Diamond Carbide Insert 10x28mm

2 pcs Round Carbide Insert 12mm diameter x 2.5mm -30°

4 pcs Screws 4x8mm for round and diamond inserts

2 pcs Screws 6x8mm for square and radius square inserts

3 pcs star key wrench

• ✅ CARBIDE WOODTURNING TOOLS - Our lathe turning tools has greatly simplified wood turning, This set of carbide lathe tools is ideal for turners at any skill level, making woodturning fast and more enjoyable. Each lathe chisel features a carbide tip with multiple sharp edges that can be rotated several times, Just rotate the cutter head ¼ turn for a clean, sharp edge and you are back to turning wood.
• ✅ CARBIDE TURNING TOOLS SET - Premium quality CNC machined from ½” square stainless steel, making them stronger, stiffer and less likely to roll than round shaft tools. Features a square shaft so the flat back can be kept flat on the tool rest and level with the floor
• ✅ ERGONOMICS TOOL HANDLE - Hard and Solid beech wood，Ergonomics design makes it more comfortable while doing turning job. Unlike the aluminum handle wood turning tool on the market which comes with only one handle, which means you have to change out the bar every time you want to switch tools.
• ✅ WOODTURNING TOOLS & ACCESSORIES - Set includes 3 turning tools : rougher tip – Square 15 x 15 x 2.5mm R50, detailer tip – Diamond 10x28m with Radius point , finisher, with extra sets of carbide inserts. Set comes with extra replaceable carbide insert: 3 Sets of indexable Replacement carbide inserts (2pcs Square14 ×14 × 2.0mm，2pcs Round 12 × 2.5mm-30°, 2pcs Diamond 10×28mm with Radius Point) and 3 torx star tip wrenches.
• ✅ SATISFACTION GUARANTEE - Our number one priority is customer satisfaction! If you aren’t happy with your wood turning carbide tool set we offer a no questions asked, 100% money back guarantee.

User questions & answers

Question:	Do you offer replacement carbide tips
Answer:	There are 6 pcs extra carbide tips come with the set, but separate carbide inserts pack (same 6 pcs) will be listed soon on amazon in next month, we will update the purchase info on this page.
Question:	Do you also have a bowl gouge for wood turning
Answer:	Hi , currently we only sell 3 piece set , but we will list more wood turning tools in this year! please add us to your wish list or shopping list so you can find us later . Thank you !
Question:	I need the detailer can I purchase it separately? Do you have other items
Answer:	Hi, Thank you for your interest in our carbide lathe tools. Currently we have only 3 piece set. As you can search on amazon, our price is very competitive, but without comprising on quality ( return the tool set if you are not happy with it) the set includes replacement inserts as you will always need them if you use the carbide tools.
Question:	I need negative rake inserts as well. What size do i need
Answer:	Hi, currently we don’t sell negative rake inserts. If you want to turn the synthetic material like resin or acrylic, simply raise your tool rest so that the cutting edge of the insert is about 1/8 inch above center, present your tool to the blank at a slightly downward angle. Or, Use a roughing gouge till the very end then use carbide for finish cuts.

Product description

Remember when you could turn your own pens? Fill your house with as many pens as you can with the WEN 8-inch by 12-inch variable speed mini wood Lathe. Adjust the variable speed anywhere from 750 to 3200 rotations per minute. The WEN 8-inch by 12-inch variable speed Benchtop wood Lathe features an MT1 spindle and Tailstock taper to tightly grip workpieces, two tool rests (4-1/2 inch and 7 inch) to provide needed support for chisels and tools during operation, and a 3.2-Amp motor to keep things turning. The easy-to-use Lever clamping system makes adjustments to both the tool rest and the Tailstock simple and precise. The WEN wood Lathe also includes a flat wrench, a headstock spur center, A Tailstock cup center, A knockout rod and a 2.3-Inch faceplate for non-spindle work pieces. And, because its a WEN product, your Lathe comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line. Remember when you could turn pens, chess pieces and more? Remember WEN.

• Perfect for pens, bowls, cups, chess pieces, and other small workpieces
• Fits workpieces up to 12 inches long and 8 inches wide
• 3.2-Amp motor provides over 50% more power than most 8-inch wood lathes
• Adjust the soft start variable speed motor anywhere from 750 to 3200 RPM
• Features a 2.3-Inch face plate, an MT1 spindle and tailstock taper, and two interchangeable tool rests

User questions & answers

Question:	Anybody know the thread size for the three tapped mounting holes on the underside of the lathe
Answer:	From their website: Benchtop mounting bolts: 0.30 Inch x 20 TPI (M8 x 1.25 pitch)
Question:	can you use a dedicated pen drilling chuck on this on this model 3420 or will it burn up the motor. I want to drill my blanks with it to
Answer:	I use a drilling chuck for all my pen blanks. As suggested, drill slowly, and frequently pull out the drill to remove shavings, as the blank may overheat and split.
Question:	How long did it take for you to get it? Says it ships in 2 months, with Prime
Answer:	When bought this lathe, they sent me 2. That being said, I got it when they said I would get it.
Question:	I'm interested in buy this lathe, does it run with 220 v or 150v, here were I'm living we run only 220. Waiting for answer, regards
Answer:	110

Product features

WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe

You will now easily be able to fit work pieces up to 12 inches long and 8 inches wide with the WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe. The minimal design is ideal for pens, bowls, cups, chess pieces, and other small work pieces. You will be able to take on larger projects around your home with this tool.

Straightforward, Sturdy and Easy to Operate

With a stunning build quality, the WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe provides sturdy frame for various work pieces. Made from cast iron, features a 2.3 inch face plate, an MT1 spindle and tailstock taper and two interchangeable tool rests for added versatility.

Product description

Specification:

Diameter: 300mm (12 Inch)

Material: Acrylic

Thickness: 5mm

Application: Wood working tool

Color: Transparent

Package include:

1 x Center Finder Compass

Guarantee

If you have any problems, you can contact us at any time, we promise we will try our best to help you under 24 hours.

• This center finder is perfect for laying out bowls, trays and platters
• Finding the center of irregular shapes to optimize yield is simple and easy
• Made from clear, fully transparent acrylic with a center hole and clearly marked circles in 5mm increments
• The circle center finder tool helps produce maximum yield on logs smaller than 300mm in diameter
• The lathe center finder works on wood, poster board, plastic, metal, glass, composites and more! Center Finder Compass is perfect for wood turners, arts,crafts, school projects, rough and finish carpenters or use it anywhere you need to draw a circle

Product description

Stainless steel with hardened fulcrum spring and points for long life. Precision ground with threaded spool mechanism for infinite adjustment. Includes 8-Inch Outside Caliper, 8-Inch Inside Caliper, and 8-Inch Divider.

From the Manufacturer

Stainless steel with hardened fulcrum spring and points for long life. Precision ground with threaded spool mechanism for infinite adjustment. Includes 8-Inch Outside Caliper, 8-Inch Inside Caliper, and 8-Inch Divider.

• Big Horn outside calipers is a useful measurement transfer tool when working with round stock or oddly shaped materials and then transferring that measurement to a ruler
• Big Horn inside calipers are great for gauging the inner diameter of an opening and then transferring that measurement to a ruler
• Big Horn flat leg dividers is a useful measurement transfer tool for uneven surfaces; Also great for a variety of uses such as tracing contours and scribing circles into metal
• Hardened and tempered bow springs and fulcrum spools assure uniform tension without side play while using this caliper set
• The forged steel legs feature hardened points for precise marking of the work piece | An adjusting screw has a self-seating washer and nut to permit quick and positive adjustment

User questions & answers

Question:	If these are stainless steel like advertised then why are they coated in oil put in a plastic sealed bag and shipped 1/2 way around the world
Answer:	I can't comment on why shipping stainless steel is such a perceived issue to you, but even if the calipers are stainless steel, the springs are not. I would venture to guess that is the main reason they are oiled.
Question:	can you lock in the measurement with these
Answer:	That is what the nut on the screw is for. It doesn't really lock, if you were to rub the nut on something it could move, and it can spring inward it you push into a hole.
Question:	stainless steel? NOT
Answer:	I have no means to test chromium content of this metal, but by 2 factors, I would venture to say that they ARE stainless steel. 1. They have been in my shop thru summer rain and heat, it is now February the 1st and there are still no visible signs of rust which would certainly be present on carbon steel materials under these storage conditions. 2. By all appearances (visually) they are comparable to any other stainless steel items I have used throughout my 45 years of woodworking. I would admit that, also visually, they may have a lower chromium content in their alloy than a comparably sized more expensive set, but they do the job I purchased them for at price much less than is really needed for my processes. Certainly, a $500 set would be nice, but then I'd have to jack my prices up, or sell 10 times more product to compensate, when these work just fine.
Question:	It's nice to know how long they are, and if I measured the pic..., but the maximum measurement is a more useful number. How wide does each get
Answer:	When it comes to calipers, digital or manual the number ie; 8", 6" etc. represents the opening of the caliper. This set of calipers all open little more than.

Product features

Helps with Accurate Measurements

The Big Horn 19053C 3 Pieces 8-Inch Spring Caliper/Divider Set is super utilitarian when working with round stock or oddly shaped materials when you want to transfer the readings to a ruler. They work great for gauging the inner diameter of an opening and then transferring that measurement to a ruler.

Sturdy and Durable

Useful for uneven surfaces, the Big Horn 19053C 3 Pieces 8-Inch Spring Caliper/Divider Set works great for a variety of uses such as tracing contours and scribing circles into metal. The hardened and tempered bow springs and fulcrum spools give you uniform tension while working with these tools.

Product description

Material: Steel+Wood

Color: As shown as the pictures

Good for the basic woodworking set,Kit for beginner, great for personalizing your leather projects.

They are great for any custom wood works.

Quantity: 8pcs/1Set

Package includes:

1Pc x 1" Skew

1Pc x 1/2" Skew

1/2" Spear point

1Pc x 1/8" Parting Tool

1Pc x 1/2" Round Nose

1Pc x 1/4" Gouge

1Pc x 1/2" Gouge

1Pc x 3/4" Gouge

• INCLUDE- 1Pc x 1" Skew , 1Pc x 1/2" Skew, 1/2" Spear point, 1Pc x 1/8" Parting Tool,1Pc x 1/2" Round Nose,1Pc x 1/4" Gouge, 1Pc x 1/2" Gouge, 1Pc x 3/4" Gouge.
• FUNCTION- These high grade professional quality chisels are perfect for carving and cutting wood on the Lathe
• DESIGN- Multi function kits with different function
• PACKAGE- Set of 8 Wood Lathe Chisels. Comes with high quality box.
• ABOUT US- We are a professional sellers of all kinds of tools,we ONLY sell tools,and promise the quality of our products.

User questions & answers

Question:	Where is the product made? Thanks
Answer:	China. Dont buy it. The going broke and sent a piece lying past my face. Don't do it.

• Indexable Replacement carbide insert design: matched with Carbide Insert, Indexable give you fresh edge for maximum cutter life. If you need Carbide Replacement Tip Insert , you can find it in our Amazon Store，(Square11 ×11× 2.0mm，Round 12 × 2.5mm-30°，Diamond 10×28mm with Radius Point and 10×32mm with Sharp Point)
• Handle：wood material，Ergonomics design makes it more comfortable while doing turning job
• Easy to use: greatly simplified learning curving when turning,No complicated angles to learn and remember,For all skill levels woodworking enthusiast or DIY，Every tool is beautifully coated for durability
• Package: Set of 3, Plastic case packaging

User questions & answers

Question:	Are these tools small enough to turn pens and pencils with
Answer:	They are definitely capable of small work like pens, etc. I turn miniature plates and bowls, with diameters less than 1 inch, and they perform superbly.
Question:	How due you get replacement cutters
Answer:	It came with some extras and you can order more from almost anywhere for probably around 10 dollars.
Question:	can I use a square radius cutter insert in the square tipped chisel? And if so where can I find inserts for these
Answer:	Yes you can use square radius cutter inserts. We have carbide cutter 11*11*2.0 with R50. Please search the Asin B085QDSXCR in Amazon searching box to find it.
Question:	Where are these manufactured
Answer:	I think they are made in China. I am going to make new handles for mine. the brass ferule came off mine after a little use. Other wise I would say they are a good tool for a lot less. I have made my own bigger ones but did not have time to make these smaller ones.

Product features

Rougher

1.Makes roughing faster, simpler and safer

2.Matching indexable square11 × 11 × 2.0mm carbide inserts

Detailer

1.Perfectly to small intricate detail work, will be used on every turning

2.Matching indexable diamond VEMN160208 and VEMN160202 carbide blades

Turner & Hollower&Finsher

1.Quickly turned and hollowed to the desired shape with this tool

2.Matching indexable 12mm round carbide tipped

8 PCS Carbide Replacement Blades

• 2pcs Round 12mm carbide cutters
• 2pcs Square 11mm carbide inserts
• 2pcs Diamond with radius blades-VEMN160208
• 2pcs Diamond with sharp point blades-VEMN160202

Upgrade stainless steel

100% Solid stainless steel material, stay away from the trouble of rusty