14 best wood lathe with casts

• 【550W POWERFUL MOTOR】- The powerful motor starts softly ensuring motor's maximize safety and low noise. 550W provide great power for the lathe operation.
• 【UNRIVALED SPEED CONTROL】- Turning speed control knob clockwise or counterclockwise to adjust the speed freely within 500-3800 RPM. MT2 Spindle. It is easy to read via digital speed display.
• 【LARGE WORK CAPACITY】- 18" (460mm) distance between centers, swing over bed 10" (254mm). High concentricity. Moving tailstock to adjust proper distances for workpieces.
• 【CAST IRON CONSTRUCTION】- Cast iron constructed wood lathes for durability and strength, providing increased stability and smooth operation. Extremely sturdy cast iron construction to reduce vibration.
• 【PROFESSIONAL TOOL RESTS】- Moving the lock lever to adjust or replace the tool rest. 6" (150 mm) tool rests for easy replacement, ideal for a variety of turning projects in labs, workshops, engineering education, etc.

User questions & answers

Question:	What is the warranty on this lathe
Answer:	One year
Question:	is there somewhere I can find an owner’s manual
Answer:	Go to harbor freight web sight look up central machianery 10x18 lathe it has a pdf for the owners manual it's the same machine as the morphon
Question:	My motor burned out, where do I get a replacement
Answer:	Good luck with that. The control switch burned out on mine and after communicating with them for awhile to arrange a fix they just stopped answering by emails. All my emails to them and Amazon went unanswered. Now all I have is a boat anchor. I only had it 3 or 4 months. Good luck.
Question:	what is the spindle thread
Answer:	Depending on what you are trying adapt to your spindle , you should not need a adapter just make sure its a 1" x 8tpi . I made the mistake of buying an adapter 33x3.5 to1"x8tpi and it wont fit down the spindle shaft again just a 1"x 8tpi for a self centering jaw or any other plate,ect.ect plus try not to use adapters if you can

Product features

Powerful Motor

550W Power motor, turning speed 500-3800 RPM, Voltage: 120V/60Hz. Our powerful motor starts softly to offer motor's maximize safety and low noise design.

Variable Speed

Optimally designed speed ranges of 500-3800 RPM variable speed. MT2 Spindle.

Large Work Capacity

Distance between centers: 18" (460mm). Swing over bed: 10" (254mm). High concentricity. Moving tailstock to adjust proper distances for workpieces.

Stable Operation

Mini lathes constructed by cast iron are of increased stability and smooth operation.

Interchangeable Tool Rests

6" (150 mm) tool rest can be adjusted to any position and direction for various needs in turning applications.

Wide Application

Benchtop wood lathe, an ideal tool for use in labs, workshops, engineering, and education.

10'' x18'' Benchtop Wood Lathe

The premier quality wood lathe features with a powerful motor with electronic variable-speed spindle control and a digital RPM readout for precise speed adjustments, make this lathe a top choice. Heavy-duty cast iron construction and rubber feet provide increased stability and smooth turning operation.

• 【550W POWERFUL MOTOR】- The powerful motor starts softly ensuring motor's maximize safety and low noise. 370W provide great power for the lathe operation.
• 【UNRIVALED SPEED CONTROL】- Turning speed control knob clockwise or counterclockwise to adjust the speed freely within 760-3200 RPM. MT2 Spindle.
• 【LARGE WORK CAPACITY】- 18" (460mm) distance between centers, swing over bed 10" (254mm). High concentricity. Moving tailstock to adjust proper distances for workpieces.
• 【CAST IRON CONSTRUCTION】- Cast iron constructed wood lathes for durability and strength, providing increased stability and smooth operation. Extremely sturdy cast iron construction to reduce vibration.
• 【PROFESSIONAL TOOL RESTS】- Moving the lock lever to adjust or replace the tool rest. 6" (150 mm) tool rests for easy replacement, ideal for a variety of turning projects in labs, workshops, engineering education, etc.

User questions & answers

Question:	Where is it made
Answer:	It is made in China and they don’t have an office or phone number in the US. That being said, it is a very nice little lathe.
Question:	What is yhe size of the spindle screw? not the bore but the threads. 1' 8tpi, 1.25 8tpi (threads per inch
Answer:	The spindle thread is metric, 33x3.5,
Question:	this unit comes with no instructions? there is a parts bag with no explanation on any of it or what its ? there website does not have any info at all
Answer:	Mine did come with a really crappy manual that is very little help. But it does have a parts list. I have a good amount of lathe experience so I knew what everything was and were the parts belong. You could look up other lathes if the same size and get a good idea of how everything works. Good
Question:	What is the thread count
Answer:	what thread count?

Product features

Powerful Motor

The motor provides great power for the lathe. Our powerful motor starts softly to ensure motor's maximize safety and low noise design.

Variable Speed

Optimally designed speed ranges of 760-3200 RPM variable speed. With 5 operating speeds, you’ll be able to turn workpieces at 760, 1100,1600, 2200, or 3200 rotations per minute. Built-in belt to adjust high, medium and low speed.

Large Work Capacity

Distance between centers: 18" (460mm). Swing over bed: 10" (254mm). High concentricity. Moving tailstock to adjust proper distances for workpieces.

Stable Operation

Mini lathes constructed by cast iron are of increased stability and smooth operation.

Interchangeable Tool Rests

6" (150 mm) tool rest can be adjusted to any position and direction for various needs in turning applications.

Wide Application

Benchtop wood lathe, an ideal tool for use in labs, workshops, engineering, and education.

10'' x18'' Benchtop Wood Lathe

The premier quality wood lathe features with a powerful motor with electronic variable-speed spindle control and a digital RPM readout for precise speed adjustments, make this lathe a top choice. Heavy-duty cast iron construction and rubber feet provide increased stability and smooth turning operation.

• 【1/3 HORSE POWER MOTOR】- 1/3 Horse Power motor, turning speed 4500RPM, Voltage: 110V. The powerful  motor starts softly offering motor's maximize safety and low noise.
• 【UNRIVALED SPEED CONTROL】- Turning speed control knob clockwise or counterclockwise to adjust speed freely within 500-3200 RPM. MT1 Spindle.
• 【LARGE WORK CAPACITY】- 12" (305mm) distance between centers, swing over bed 8" (203mm). High concentricity. Moving tailstock to adjust proper distances for workpieces.
• 【CAST IRON CONSTRUCTION】- Cast iron constructed wood lathes for durability and strength, providing increased stability and smooth operation. Extremely sturdy cast iron construction to reduce vibration.
• 【PROFESSIONAL TOOL RESTS】- Moving the lock lever to adjust or replace the tool rest. 150mm & 300mm tool rests for easy replacement, ideal for a variety of turning projects in labs, workshops, engineering education, etc.

User questions & answers

Question:	What 3 or 4 jaw chuck will fit a mophorn 8 ×12 lathe
Answer:	Any chuck that fits on a 1" 8 TPI spindle and has an external diameter of 5" or less will work fine.
Question:	hi can i work 220v? i need 220v
Answer:	This model, sold in the the US version of Amazon is 120V only.
Question:	What size chuck do i need to get im looking for a 4 inch but i dont know which will fit this
Answer:	The lathe spindle is 1" 8 TPI. Any 4" chuck that matches that spindle size should work fine.
Question:	Can this unit be extended
Answer:	No. There are no attachment mechanisms to extend the bed, and there are no bed extensions available that match it.

Product features

Powerful Motor

1/3 Horse Power motor, turning speed 4500RPM, Voltage: 110V. Our powerful 1A motor starts softly to offer motor's maximize safety and low noise design.

Variable Speed

Optimally designed speed ranges of 500-3200 RPM variable speed. MT1 Spindle.

Large Work Capacity

12" (305mm) distance between centers, swing over bed 10" 8" (203mm). High concentricity. Moving tailstock to adjust proper distances for workpieces.

Stable Operation

Cast iron constructed mini lathes is of increased stability and smooth operation.

Interchangeable Tool Rests

Two different-sized tool rests with 150mm & 300mm for various needs in turning applications.

Wide Application

Bench top wood lathe, an ideal tool for use in labs, workshops, engineering and education.

8 x 12 inch Variable Speed Benchtop Mini Wood Lathe & Variable Speed 500-3200RPM

Our 8 in. x 12 in. Variable Speed Benchtop Mini Wood Lathe features variable speed 500-3200 RPM, a 1/3hp motor and an MT1 spindle. Soft startups ensure safety to both workpieces and the motor. Precise design is perfect for various uses in labs, workshops, engineering and education.

Product description

The JET JWL-1640EVS 16"x40" variable-speed woodworking lathe is loaded with cutting-edge features that distinguish it from others in its class. Included is a sliding headstock, electronic infinitely variable speed from 40 to 3,200 RPM, and a headstock locking handle.

• VERSATILITY: 36 integrated indexing positions.
• IDEAL SPEED: Infinitely variable speed from 40 to 3,200 RPM.
• CONVENIENCE: Leg-mounted tool holder, and easy-to-access digital readout (DRO).
• SMOOTH MOVEMENT Tailstock features Acme threads.
• ADDED PROTECTION: Inverter is completely enclosed.

User questions & answers

Question:	Does this have a swing away for the tailstock
Answer:	No it doesn’t but you can get an extension and move the tail stock further away from the head stock. This gives plenty of working room. It’s an awesome lathe.
Question:	Does the headstock rotate as well as slide
Answer:	The newest 1640 models do not rotate. JET discontinued that feature.
Question:	Is this lathe available without the legs for a cheaper price
Answer:	I don’t think so. It’s pretty big to be mounting on a bench.
Question:	Does this come with wheels
Answer:	no. Given the weight, wheels would be a bad idea. IT is on adjustable feet and you can slide it to position.

• 【370W POWER MOTOR】- 370W Power pure copper motor, turning speed 1400RPM, Voltage: 230V. The powerful  motor starts softly offering motor's maximize safety and low noise.
• 【UNRIVALED SPEED CONTROL】- Turning speed control knob clockwise or counterclockwise to adjust speed freely within 500-3200 RPM, including 5 grate speed: 760/1100/1600/2200/3200RPM. MT2 Spindle.
• 【LARGE WORK CAPACITY】- 18" (457mm) distance between centers, swing over bed 10" (254 mm). High concentricity. Moving tailstock to adjust proper distances for workpieces.
• 【CAST IRON CONSTRUCTION】- Cast iron constructed wood lathes for durability and strength, providing increased stability and smooth operation. Extremely sturdy cast iron construction to reduce vibration.
• 【PROFESSIONAL TOOL RESTS】- Moving the lock lever to adjust or replace the tool rest. 150mm and 300mm tool rests for easy replacement, ideal for a variety of turning projects in labs, workshops, engineering education, etc.

Product features

Powerful Motor

370W Power motor, turning speed 1400RPM, Voltage: 230V. Our powerful 1A motor starts softly to offer motor's maximize safety and low noise design.

Variable Speed

Optional speeds: 760/1100/1600/2200/3200RPM. MT2 Spindle.

Large Work Capacity

18" (457 mm) distance between centers, swing over bed 10" (254 mm). High concentricity. Moving tailstock to adjust proper distances for workpieces.

Stable Operation

Cast iron constructed mini lathes is of increased stability and smooth operation.

Interchangeable Tool Rests

Two different-sized tool rests with 150mm & 300mm for various needs in turning applications.

Wide Application

Bench top wood lathe, an ideal tool for use in labs, workshops, engineering and education.

10 x 18 Inch Variable Speed Benchtop Mini Wood Lathe & Variable Speed 500-3200RPM & Rubber Feet

Our 18 in. x 10 in. Variable Speed Benchtop Mini Wood Lathe features variable speed 500-3200 RPM, a 370W motor and an MT2 spindle. Soft startups ensure safety to both workpieces and the motor. Precise design is perfect for various uses in labs, workshops, engineering and education.

• Electronic variable-speed spindle control
• Digital spindle speed readout
• 10° Spindle indexing
• Headstock can be positioned anywhere along the bed
• Heavy-duty cast iron bed and legs ensure stability and minimal vibration

User questions & answers

Question:	Does the Grizzly GO733 woodlathe come with a chuck
Answer:	This unit includes the following: spur center, cupped live center , knock-out tool, tool rest , 6" faceplate, indexing pin, and hex wrenches. It does not include the chuck.
Question:	What is the motor rating
Answer:	Call the customer service at Grizzly for an answer. Good people to work with.
Question:	Can this machine plug inot a typical outlet in my garage. Thta is my workshop
Answer:	No this machine requires 220v wired to a NEMA 6-20 receptacle (which can be purchased at any big hardware store).
Question:	Outboard turning
Answer:	Yes

Product features

2 HP 18" x 47" Wood Lathe with Variable Frequency Drive

Need a solid cast-iron lathe with big capacity? Well, look no further, because this 18" x 47" Wood Lathe has it all! You'll appreciate the cast-in shelf brackets for adding additional mass, variable-speed control in two torque ranges, digital speed indicator, forward and reverse switch and convenient utility basket. Single-phase frequency drive technology provides the electronic variable-speed control without the three-phase power requirement. All you need is standard 220 Volt, single-phase power to be up and running in no time. You'll be amazed by all the quality and innovative features this lathe has to offer!

Headstock Rotates 180 Degrees

Electronic Variable-Speed Spindle Control with Digital Spindle Speed Readout

4-3/8" Tailstock Barrel Travel

14" Wide Toolrest

Specifications:

• Motor: 2 HP, 220V, 3-phase with single-phase VFD, 5.6A
• Power requirement: 220V, single-phase, 15A
• Swing over bed: 18"
• Swing over tool rest base: 14"
• Distance between centers: 47"
• Spindle threads: 1-1/4" x 8 TPI RH
• Spindle speed: Variable, 100–3200 RPM
• Spindle taper: MT#2
• Tailstock taper: MT#2

Product description

1/3 Horsepower bench top lathe with variable speed motor

• Motor: 1/3 HP, 2 Amp, 110V, Single-phase, 60 Hz
• 12-inch distance between centers
• 8-inch swing over bed
• Cast iron construction and infinitely variable speed control
• Includes two tool rests

User questions & answers

Question:	I have a chuck that is 1"-8tpi female thread (nova 48111), it doesn't fit on this lathe. what adapter should i buy
Answer:	Buy a 3/4" 16 TPI to 1" 8 TPI adapter. If you further questions go to http://www.woodturningz.com/downloads/w1704_ds.pdf for the specs on this machine.
Question:	is there an adapter for the face plate for mounting live center chucks? I bought one but won't line up with holes
Answer:	I'm not sure if they make the adapter to mount on the face plat. I have a 2" diameter three jaw,self centering scroll type chuck that i bought from Amazon that ihave used that works great,but i think that the holes in the face plate is for mounting a backing block to the piece of wood stock to turn a bowl. It says in the manual that you glue the block to the wood your turning and use the holes to screw the block on to face plate. Hope this helped.
Question:	What size wood stock can it hold? How about something like 12'' long by 8" wide piece of wood
Answer:	The length it will hold will be dependant upon what chucks you have in the head and tail stock. The bulkier the chucks, the shorter the length it will handle. I'd say it will hold 12" lengths unless your chucks are sizable. I wouldn't try more than 4" width stock unless it was short. Although the lathe may hold the stock, it would be too much for the motor. The intended purpose of this lathe is to make small things like ink pens, Christmas ornaments, small toys like tops or yo-yo's and tool handles etc. If you want to mount 12" X 8" stock you should be looking at full sized lathes.
Question:	is there anyway to secure to a bench
Answer:	Yes. It has has three holes in the base that you can bolt it down with. I bolted mine down on a metal stand. It holds it down real solid. Mine is the Shop Fox W1704 also. It is well built. I really like mine. Hope this helps!

Product features

Shop Fox W1704 Benchtop Wood Lathe

Tackle pen turning or other small cutting or shaping projects using the Shop Fox W1704 bench-top lathe from Woodstock International. Made of cast iron, and designed to fit neatly on a workbench, this lathe features a 1/3-horsepower, variable-speed motor and delivers spindle speeds between 700 and 3,200 revolutions per minute (RPM). It also features a safety paddle switch, an MT No. 1 spur center, an MT No. 1 live center, 4-1/4-inch and 7-inch tool rests, a 5-3/4-inch faceplate, and a 3/4-by-16-inch TPI RH spindle.

Includes Two Tool Rests

The W1704 includes both a 4-1/2 and 7-inch tool rest for various turning applications and with a 13-inch distance between centers and an 8-inch swing over the bed this lathe is ideal for a variety of turning projects.

Variable Speed

The infinitely variable speed from 700-3200 RPM comes in handy when turning hard or soft species of wood.

5-3/4-inch Faceplate Included

This benchtop lathe includes a 5-3/4-inch faceplate which threads onto the headstock spindle for non-spindle turning (usually used for making bowls or other items that cannot be supported from the tailstock).

Product description

Remember when you could turn your own table legs? Fill your house with as many table legs as you can with the WEN 12-Inch by 18-Inch 5-Speed Wood Lathe. With 5 different operating speeds, you’ll be able to turn work pieces at 520, 900, 1400, 2150, or 3400 rotations per minute. The 4. 5A motor provides maximum torque while the sturdy 70+ pound build prevents walking and wobbling during operation. This beast of a lathe features an MT2 spindle and tailstock taper to tightly hold your work pieces, along with a 7-7/8-inch tool rest for chisel and tool support during operation. The easy-to-use lever clamping system makes adjustments to both the tool rest and the tailstock simple and precise. The WEN Wood Lathe also includes a headstock spur center, a tailstock cup center, a flat wrench, a knockout rod, 2 hex wrenches (3 mm and 5mm), an accessory holder, and a 3-1/8 inch faceplate for turning bowls, cups and other non-spindle work pieces. And, because its a WEN product, your lathe comes backed by a two-year , a nationwide network of skilled service technicians and a friendly customer help line. Remember when you could turn pens, bowls, cups, chess pieces and more? Remember WEN.

• Attack work pieces up to 18 inches long and 12 inches wide
• Switch between five different speeds: 520, 900, 1400, 2150, or 3400 RPM
• Includes 3-1/8 inch Faceplate for turning bowls, cups and other non-spindle work pieces
• MT2 tailstock and headstock tapers allow for compatibility with a wide variety of Lathe Accessories
• Features a 4. 5A motor, an MT2 headstock spur center, an MT2 tailstock live center, an 8-inch tool rest, and an on-board accessory holder

User questions & answers

Question:	Where is this product made
Answer:	China
Question:	I have this Wen 3424 lathe. Now I need some drill bits to do inside stuff
Answer:	As long as you get a chuck with the righ taper then you should be fine. I believe the 3424 is a MT2
Question:	Cast iron or steel construction
Answer:	Cast iron
Question:	Just got into ring making and want to know if this is suitable for beginner/intermediate ring turning
Answer:	For wood rings, yes. You can get metal ring inserts made of sterling, titanium, etc. You will need a special chuck to hold your small work, or use hollowed ring blank secured to a dowel. When shape is finished, leave on lathe to sand and polish. Whoever told you no was presuming rings can only be made of metal.

Product features

5-Speed Operation

With 5 operating speeds, you’ll be able to turn workpieces at 520, 900, 1400, 2150, or 3400 rotations per minute.

4.5-Amp Motor

The 4.5A motor provides maximum torque while the sturdy 70+ pound build prevents walking and wobbling during operation.

MT2 Tailstock

With threads measuring in at 1 inches by 8 TPI, the included MT2 spindle and tailstock allow for a variety of accessories.

Accessories

The WEN Lathe includes a 7-7/8 inch tool rest, headstock spur center, tailstock live center, and an onboard accessories holder.

Product description

Featuring a ball-bearing live center, heavy-duty steel knockout bar, and onboard storage for easy access to adjustment tools, the Delta 46-460 industrial 12-1/2-inch variable-speed midi lathe handles even heavy-duty jobs with ease. Ideal for professional woodworkers, this machine gives you fast, smooth results and offers variable speed for consistency and control.

Industrial 12-1/2-Inch Variable-Speed Midi Lathe At a Glance: Powered by a 1-horsepower max, 1,725-rpm motor for robust performance 12-1/2-inch swing capacity--the largest in its class Variable speed with three pulley-speed ranges Includes 6- and 10-inch tool rests and 3-inch face plate Backed by a five-year warranty

With a 12-1/2-inch swing, the 46-460 has the largest capacity in its class. View larger.

The extension bed increases the overall bed length to 42 inches. View larger.

Powerful Motor and Variable Speed for Consistency and Precision

Powered by a 1-horsepower max, 1,725-rpm motor, the Delta 46-460 industrial 12-1/2-inch variable-speed midi lathe provides a 12-1/2-inch swing capacity--the largest in its class. Variable speed with three pulley-speed ranges makes it easy to select the required speeds needed to turn a project without changing belt position.

Forward and Reverse Provides a Superior Finish

For accuracy and precision, forward and reverse functions allow the turner to achieve a superior finish. As woodworkers know, sanding a turned piece with the grain causes the wood fibers to lie down and remain rough while sanding a turned piece against the grain will shave the wood fibers smooth. Rotating the turned piece in both directions is the way to achieve a truly smooth finish, yet it often involves remounting the work piece backwards--a time-consuming and often impossible task. With the 46-460, this process is simplified. With a quick flip of the switch, it's done.

Patented Belt-Tensioning System for Fast Speed Changes and Longer Tool Life

A patented belt-tensioning system makes for quick speed changes, and sets the belt at the correct tension every time for maximum power transfer and longer tool life. And large objects are no problem with the six-groove belt that provides superior power for effortless turning.

Cast-Iron Construction for Durability and Strength

Durable and stable with all cast-iron construction, the 46-460 also includes a three-inch face plate, and 6-inch and 10-inch tool rests for tool support in a variety of turning applications.

Warranty Information

The Delta 46-460 industrial 12-1/2-inch variable-speed midi lathe is backed by a five-year warranty.

What's in the Box

12-1/2-inch variable-speed midi lathe, 6-inch and 10-inch tool rests, chrome 3-inch face plate, tool rest base, knockout bar, live center, wrenches, and manual.

Variable speeds let you perform a variety tasks without changing the belt position.

• Powerful 1 hp max, 1,725 rpm motor
• Large 12-1/2-inch swing capacity provides the largest capacity in its class. Drive spindle: 1 inch -8 RH TPI thread
• Electronic variable Speed with three-pulley speed ranges provide the required speeds needed to turn a project without changing belt position
• Forward and Reversing function allows the turner to achieve a superior finish. Sanding a turned piece with the grain causes the wood fibers to lay down and remain rough.
• Patented belt tensioning system for easy and quick speed changes and sets the belt at the correct tension every time for maximum power transfer and longer tool life

User questions & answers

Question:	does this lathe have indexing feature
Answer:	Yes, it does have the indexing notches in the lockable wheel.
Question:	what is the range in speed
Answer:	3 ranges each variable. Speed: 250-700, 600-1,800 and 1,350-4,000 RPM
Question:	I just bought this lathe. The forward/reverse switch seems reversed. Lathe turns forward when switch is in reverse position, and vice versa
Answer:	looking from the tailpiece toward the chuck: forward is counter clockwise reverse is clockwise. Mine seems to turn a little slower in reverse so if yours is wired wrong at the switch you might consider that. I live in Texas and turn mostly mesquite wood and this lathe does a fine job with it.
Question:	Is it mt1 or mt
Answer:	Mt2

Product features

BEAUTIFUL RESULTS

The Delta 46-460 provides exactly what you need to achieve your turning masterpiece. This powerful 1 horsepower workhorse produces 1,750 rpm for enough torques and speed to handle even highly figured woods and you can slow it down to 250 rpm for your large creations.

The reversible electronic variable speed with a pulley system minimizes vibration and chatter. The patented belt tensioning system allows easy and quick speed changes and sets the belt at the correct tension for maximum power transfer and longer tool life

For fluting and other decorative applications, the indexing pin locks the head stock spindle in 24 different locations.

Not Included Model 46-461

The Delta Industrial Reversible Nova G3-D Wood turning Chuck is designed to offer you the latest innovation for professional turning results

Not included Model 46-462

This Delta lather stand raises the tool to a comfortable working position while providing stability to master even large creations.

Not included Model 46-463

The Delta modular lathe bed extension allows you to connect multiple extensions beds to a single lathe. One extension increases your tuning capacity up to 25.5 inches.

Not Included Model 46-464

Shown above is the Delta 46-460 lathe with the 46-462 lathe stand, 46-463 bed extension,and the 46-464 stand extension.

Product description

This is a well made, heavy faceplate. At 7/16" thick, it is rigid and well balanced.

• 7/16" Thick Steel Faceplate - Heavy and Rigid
• 8 Screwholes - 4 rows of 2 at 90 degrees
• Flat spots cut on back spigot for easy removal from lathe

User questions & answers

Question:	Can we get an update on the set screw question? Conflicting info here. Pics show set screw
Answer:	The set screw was added about 6 months ago. All current stock should have the set screw.
Question:	Does this require anything else or can i just slap it right on to the lathe
Answer:	You could just slap it right on to the lathe - - assuming that it has the same threads as your lathe spindle and assuming that you aren't trying to run it in reverse, and assuming that you have some screws to screw into the wood.
Question:	how do you know the thread sizeof your lathe
Answer:	I needed the faceplate to fit on an adapter for my Shopsmith lathe and the only adapter had only one thread size and so that is the one I bought.
Question:	Does this item have set screws for reverse sanding. Also, is there a way to remove it from lathe once it tightens
Answer:	No, there is no set screw. There are flats on the back @ 1-5/8" spacing...we hope to have some wrenches for these, but probably not till late fall. However, you could modify a Nova 23079 wrench (made for the Nova Chuck inserts) by grinding the opening slightly larger (stock it is just over 1.5").

Product description

3-Piece 5/8-Inch diameter post Tool Rest set. Includes 6-Inch, 9-Inch and 12-Inch long steel rests. Made with a 5/8-Inch diameter tool post Constructed from solid steel bars. Fits into most MIDI lathe tool rest mounts. Three convenient widths for vibration free turning.

• Heavy duty, solid round bar 3pc tool rest set provides ultimate chisel control for lots of different woodturning projects
• Smooth, dense steel surface allows the tool to glide over the bar for vibration-free turning
• Post on all tool rests is 5/8" diameter (15. 875mm) and 2-3/4" long
• The included toolrests have top bar lengths of 6", 9", and 12"
• Round top bar is also 5/8" diameter

User questions & answers

Question:	Does it fits rigid w
Answer:	They are the standard diameter to fit most wood lathes. Ed
Question:	Why do you not make this tool rest in a 1" diameter post
Answer:	I agree that this might be a good idea; however, since PSI has a clientele that primarily focuses on pen turning, a 1" post would be overkill. I actually made a 1" collar about 2" long with a below flush sets crew that I can tighten up on the tool rest. Then the tool rest with the collar attached will fit in and tighten up like it should. I know this didn't actually answer your question, but I do hope it helps!
Question:	Anyone know if this fits in the HF Item#34706 wood lathe with the 33" bed
Answer:	I don't know if they will fit, these are 5/8", so I would suggest you measure your current post size. Also, these are definitely not worthless. I abandoned my Jet tool rest and use only these now. I guess it's personal preference, but I like the round bars. They tend not to pit because the pressure is spread across a larger area.
Question:	How long is the post
Answer:	The post is just long enough for my Jet 1221VS lathe. These are kind of cheap and you would be better off to spend more money and buy the 2 piece rests.

Product description

This is an authentic Easy Wood Tools (EWT) Ci2-R2-NR Patented Negative Rake Carbide Cutter designed to fit the Easy Start, Mini and Mid Size Easy Roughers. Negative rake cutters have been shown to produce better cuts in man-made acrylics, hard exotic woods and end grain. Beware of cheap imitations of Easy Wood Tools carbide cutters. Authentic EWT cutters have the optimal 3G’s of Carbide - Grade, Grind, and Geometry. 1) The Right Grade: Carbide is basically a mixture of tungsten powder and cobalt that is fused together under high pressure and heat. The ratio of cobalt to tungsten and the size of the tungsten particle are referred to collectively as the ‘grade’. There are literally hundreds of conceivable grades and no ‘one grade’ of carbide is suited for all applications – whether wood cutting or metal cutting. The perfect combination of cobalt and grain size in Authentic EWT Carbide cutters, yield a cutting edge that is both the keenest and the most durable grade for woodturning available with today’s carbide technology. 2) The Right Grind: EWT grinds all of their cutters on super rigid CNC grinders to prevent micro chipping of the cutting edges. EWT uses the proper grit diamond wheels to produce the flattest, truest surfaces possible with minimal grinding scratches left on the surface. All the cutter surfaces are ground in the optimum sequence to bring the edge into keenness during the very last process, or once again micro chipping of the cutting edges will occur if the proper sequence is not followed. 3) The Right Geometry: EWT grinds all their cutters to the correct angles and geometries specifically for woodturning. This produces an edge that cuts both cleanly and safely for all skill levels.

• Authentic Easy Wood Tools Ci2-R2-NR Patented Negative Rake Carbide Cutter - Fits Easy Wood Tools Easy Start, Mini and Mid-Size Roughers
• Designed specifically for turning man-made resins, acrylics and extreme hardwoods. It is a "Game Changer" for turning these materials. The EWT Patented Negative Rake Cutters have virtually eliminated catches and tear-out whilst turning expensive blanks. Also leaves ultra-smooth finish = less sanding!
• Just like our Standard Cutters, when one side of the cutter gets dull, simply turn it to a new side and continue turning. When all sides are used, you just replace the cutter. You'll devote more time to turning instead of wasting hours sharpening your tools, and you'll save money in the long run, too.
• Also works great for final passes on any type of wood...which equals less sanding
• Designed and Manufactured 100% in the USA

User questions & answers

Question:	What is the difference between the 1600nr and the 2600nr
Answer:	The size of the cutter & size of Easy Wood tool they fit. 1600NR fits Full size & Pro size roughers. 2600NR fits Mini & Mid size roughers and also the Easy Start rougher.
Question:	Will this fit the full size simple wood s55d shaft
Answer:	As I only have Easy Wood Tools, I can’t say if it will fit your Simple Wood shaft. Sorry. But if it helps you: I fit this radial, negative rake shaper on my Ci2 medium size tool shaft. It perfectly replaced the (regular) square rougher that the tool originally came with.
Question:	What is the size of the machine screw so that I can get a replacement? Mine have stripped out on the first change
Answer:	Same here. Very poor quality screws
Question:	Has anyone attempted to sharpen the neg carbide cutters or should i just buy extra
Answer:	Sharpening a negative rake carbide cutter would be a tedious job with questionable results. One would have to GENTLY strop the edge from the bottom up with a diamond stone to create a very slight burr. I throw them away and buy new ones. Time is worth more than the protracted effort to sharpen and if you don't get it just right it will be a wasted effort.

Product description

Spindle Bearing Set for Vintage Craftsman 9" and 12" Wood Lathes. Set of 2. 3/4" x 40mm x 12mm Originally sold under Craftsman Part Numbers 181229 and 8186868. Will fit models: 103.23070, 103.23071, 103.23870, 103.23880, 103.23881, 113.228000, 113.228160, 113.228161, 113.228162, 113.228163, 113.228165, 113.228360, 113.23800, 113.23801, 113.238160, 113.238180, 113.23850, 113.23851, 113.23881

• 3/4" x 40mm x 12mm
• Will fit models: 103.23070, 103.23071, 103.23870, 103.23880, 103.23881, 113.228000, 113.228160, 113.228161, 113.228162, 113.228163, 113.228165, 113.228360, 113.23800, 113.23801, 113.238160, 113.238180, 113.23850, 113.23851, 113.23881

User questions & answers

Question:	bearing for a craftsman professional wood lathe model
Answer:	The model list for this bearing set is included in the description.
Question:	How warm can these be heated for installation on a tight-fitting spindle
Answer:	If warming the entire bearing you can warm to 200° F. If using a bearing heater it is safe to heat only the inner race of bearing for 250° F for a brief period. You can optimize the the temperature differential by cooling the corresponding the shaft.
Question:	Can you verify the center diameter is 3/4 inch, in metric that is just short of 20 mm
Answer:	These are metric bearings with a non-standard inch bore. The bore is 3/4".

Product description

The Nova 12" Cole jaws are a very versatile set designed primarily for the re-chucking of bowls to remove chuck marks or to re-shape the bottom of bowls that have already been turned. There is also provision to mount the 50mm, Step, and 100mm jaws onto the Cole jaws which enhances their use considerably. All the facilities of the other jaw sets can be fully utilized in conjunction with the Cole jaws. These jaws more than any other really begin to explore the tremendous versatility of the Nova Chuck. A special woodworm screw (optional) can be used for initial bowl mounting. With this combination of holding methods, it is possible to turn a bowl from rough blank to a completely finished smooth bowl with just this one jaw set. The Nova Chuck Cole jaw combination is the only chucking system to allow such a complete facility without any complex jaw changes or different set ups. There are a number of re-chucking options; false wooden jaws can be added, wooden dowels used or rubber stoppers which are provided with the basic kit. This package also includes 4 spare jaw mounting screws....yes, you will need these eventually......!

• For large bowl turning (requires 14" or larger swing lathe)
• Also includes 8 extra long mounting screws for double jaws use (see description)
• Kit includes 4 jaw plates, 8 mounting bumpers (as in pic)
• Recommended for Supernova, Supernova 2, and Nova Titan Chucks
• Also includes 4 EXTRA regular jaw screws which you don't need..until you lose one in the shavings...

User questions & answers

Question:	What is the smallest size bowl that will fit in this cole jaws. Does it have a range like from 12inches down to 3 inches
Answer:	You could externally grip a small bowl of about 2-1/4". If you want to internally grip (expansion mode), 3.5" would be about the smallest.
Question:	are the jaws 12 inch open or closed. I have a 12 in lathe. 6 inch swing
Answer:	12" is closed...these will not work for you. The Nova JSCOLE ones are the 10" ones that are designed for 12" lathes.
Question:	Will it fit the Nova G3 chuck
Answer:	Yes, that is what my jaws are on
Question:	What's the largest diameter it will accept? Is it really
Answer:	There is some variation with the chuck you use. The plates form an outside circle of 12"....if you are working on expansion mode, you can get inside 12". On a Titan you may just grab 12", although a SN2 you'll be a bit below that. If you are regularly working with bowls 12", I might recommend the 6039 extension kit which gets you up to 15"...that way you are not working at the very edge of your chuck's reach. You can buy this extension kit on Amazon, and we also offer the a kit with the 6040, 6030 AND the 6039 in a package here as well.