10 best fd lathes

Product description

2-stage belt drive and additional electronic control enables spindle speeds up to 5,000rpm. The right cutting speed for even the smallest pieces. For face turning, longitudinal turning, boring, taper turning, slicing and drilling. Complete with 3-jaw chuck and live center. Center distance 150mm (4"). Swing 55mm (2.2"). Height over cross slide 33mm (1.3"). Machine bed with dovetail guides of continuous aluminum casting. Die-cast aluminum spindle headstock. With quiet special DC motor, 2-stage belt drive and additional electronic speed control for high torque at low speeds for larger work pieces and for the appropriate cutting speed, even for the smallest pieces. Main switch with emergency stop function and restart protection. Precision bearing mounted main spindle with continuous 8.5mm (21/64") bore. Chuck fit for standard ER 11 type collets. Three-jaw chuck, self-centering (inside jaws 1 - 20mm (1/32" - 4/5"), outside jaws 20 - 50mm (4/5" - 2")). Die-cast aluminum tailstock with spindle and live center (fitting MK 0/short). Support: To be shifted manually on the bed and clamped with lever. Rotating tool post for turning steels 6 x 6mm (15/64" x 15/64"). Processing via top slide (60mm (2.35"), travel distance Z) and cross slide (40mm / 1.57"), travel distance X). The angle adjustment of the upper carriage makes it possible to turn tapers up to +/- 45°. Handwheels with zero adjustable scale ring (1 division = 0.05mm (0.002"), 1 revolution = 1mm (1/32")). Other technical data: 110 - 120V AC. 50/60Hz. Distance between centers 150mm (4"). Swing 55mm (2.2"). Height over cross slide 33mm (1.3"). Cross slide travel (X) 40mm (1.57"), top slide travel (Z) 60mm (2.35"). Steel tool post for turning steels 6 x 6mm (15/64" x 15/64"). Spindle bore 8.5mm (21/64"). 2-stage belt drive with electronic speed control: Stage 1 = 800 - 2,800rpm. Stage 2 = 1,500 - 5,000rpm. Dimensions approx. 360 x 150 x 150mm. (14.1" x 4" x 4"). Weight 4.5kg (10 lbs).

• Quiet, precise and vibration-free for fatigue free use
• Low weight and slim design, without ever compromising performance
• High quality precision tools

User questions & answers

Product description

JPW FLASH DRIVE FOR 4200T CNC LATHE (FD-4200T)

Product description

4-jaw-chuck, self-centering for FD 150/E. Used to clamp cylindrical, square, or octagonal work pieces. High accuracy. Clamping range with reversible jaws from 1 – 20mm (inside) and 20 – 50mm (outside). Ø 50mm.

• For use with Precision Lathe FD 150/E.
• Used to clamp cylindrical, square, or octagonal work pieces.
• Made in India.
• Included components: 1 Chuck

User questions & answers

Product description

cc965d20102689da

Tips: Due to different monitors, shooting light, environmental factors and other reasons, there are some color differences that exist objectively and cannot be avoided. But usually does not affect the use of the product, if you mind these, please consider carefully before buying. thank you!



Features: 11.5mm diameter, 100mm moderate price long round stock lathe tools HSS rods.

This product workmanship is not yet heat treated recommended – so it can still be sawed, turned, drilled, milled, filed, etc.

Used for turning, boring, graving, etc.

• Weight: 166g; (durable in use) Product Name: Lathe Round Rod
• Main Material: faultless HSS
• Package Content: Carefully selected 2pcs x Lathe Round mind-blowing Rod
• Overall Size: consummate 11.5 x 100mm / 0.45" quintessential x 4"(D*L)
• Main Color: perfect in workmanship Gray

Product description

Size: 11mmx11mmx2.0mm-R50

Grade for Wood Machning

Grade: BK10UF

Hardness: 93.5

Transverse Rupture Strength: 3600

Grain Size: Ultrafine

• STANDARD SIZE:11mm(Length)x11mm(Width)x2.0mm(Thick)-R50-30°
• INDUSTRIAL QUALITY:Made of solid tungsten carbide,hard and durable
• 4 Sharpened razor edges which can be rotated to a new razor edge as one side becomes dull
• Perfect for general purpose wood, chipboard, plywood and MDF/HDF cutting works
• Environmental protection, high efficiency, energy saving, recyclable carbide cutters knife

Product description

Sise: Dia:15mm lengthX15mm width X2.5mmThick-30° Cutting angle for Woodturning Woodworking Head tools

Grade for Wood Machning:

Grade:LCR08

Hardness:93.5

Transverse Rupture Strength:3600

Grain Size:Ultrafine

• STANDARD SIZE:15mm(Length)X15mm(Width) X2.5mm(Thick)-30°(Cutting angle),10pcs
• INDUSTRIAL QUALITY:Made of solid tungsten carbide,hard and durable
• 4 Sharpened razor edges which can be rotated to a new razor edge as one side becomes dull
• Perfect for general purpose wood, chipboard, plywood and MDF/HDF cutting works
• Environmental protection, high efficiency, energy saving, recyclable carbide cutters knife

User questions & answers

Product description

Bosch Benchtop Router Table RA1181

The Bosch RA1181 bench top router table provides a large work surface for woodworking and routing. Designed to fit a variety of routers, this router table is a versatile piece of equipment that will serve as an indispensable part of any woodworking shop. Its 2 1/2 inch dust collection port offers better dust collection for a cleaner work environment. The large aluminum top makes the table both durable and portable. This bench top router table includes mounting hardware, features a tall aluminum fence with adjustable MDF face plates, two out feed shims, and an aluminum router mounting plate. The starter pin and guard for router curved work pieces is also included, in addition to the built in cord wrap for convenient storage and portability.

Works with:

Bosch: 1613-Series and 1619EVS Plunge Routers; 1617-Series and MRF-Series Routers (in fixed base only)

Craftsman: Most Craftsman 1/2"-Collet Routers

DeWalt: DW616 and DW618 Routers (in fixed base only)

Hitachi: M12VC Routers

Makita: RF1100 and RF1101 Routers

Milwaukee: 5615 and 5616 Routers

Porter-Cable: 690-Series and 892-895-Series Routers (in fixed bases only) and 7529 Plunge Router

Ryobi: R161, R162, R163, RE170 and RE180 PL Routers

Skil: 1810, 1815, 1820 and 1825 Routers

Template Guides: The RA1181 does not accept any template guides.

Vacuum Hoses: Common 2-1/2"

Vacuum Hoses attach directly to the RA1181.

Vacuum Hose Adapter for 35 mm Hoses, such as Bosch 35 Hoses: VAC004.



Hiltex 10100 Tungsten Carbide Router Bits | 15-Piece Set

Solid carbide flush trim. " With Ball Bearing: Flush Trim Bit: 1/2"" Corner Round Bit：3/4"" 45DegreeChamfer Bit: 1/2"" Cove Bit：1/2"" Roman Ogee Bit：5/16"" ".

• Product 1: Benchtop router table; Attaches to any workbench
• Product 1: 2 Adjustable feather boards; Dust collection port; Dual outlet switch; 6 feet power cord
• Product 1: Aluminum fence with MDF face plates; Aluminum router mounting plate
• Product 1: Includes router table, 3 mounting plate insert rings, mounting hardware for most Bosch routers, 2 feather boards, adjustable clear guard, starter pin and guard, out feed fence shims
• Product 2: Precisely machined sharp YG8 tungsten carbide blade makes clean and accurate cuts on all types of wood with excellent resistance to heat
• Product 2: Hardened solid alloy steel main construction with power coating finish for durability and longevity
• Product 2: Enclosed bearing roller for smooth and aligned operations with 1/4 inch universal shank fits all models of routers
• Product 2: Comes with wooden index case for easy storage and organization

Product description

Modle : SDNCN1212H07

SDJCR1212H07

SDJCL1212H07



----------SDNCN1212H07

1.Shank Diameter : 1/2" inch

2.Total length : 100mm

3.Screw : M2.5*6

4.Wrench：T8

5.Insert : DCMT21.51

6.Cutting direction : middle



----------SDJCR1212H07

1.Shank Diameter : 1/2" inch

2.Total length : 3.93" inch

3. Screw : M2.5*6

4.Wrench：T8

5.Insert : DCMT21.51

6.Cutting direction : right



----------SDJCL1212H07

1.Shank Diameter : 1/2" inch

2.Total length : 3.93" inch

3.Screw : M2.5*6

4.Wrench：T8

5.Insert : DCMT21.51

6.Cutting direction : left



If you need more insert that match this tool set, you can search for ASIN: B07GSYR1CZ

• Material : Steel (turning holder) + Carbide (turning insert)
• Package : 1PC SDNCN1212H07 + 1PC SDJCR1212H07 + 1PC SDJCL1212H07 + 3PCS DCMT21.51 Inserts + 3PCS T8 Wrench
• Holder shank diameter : 1/2" inch , total length :3.93" inch . Black oxided smooth finish on each turning tool holder style and shank size.
• Each tool holder comes with a carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action.
• Blades exquisite workmanship, high strength, high toughness, stable and durable. If you need more matching blades （dcmt21.51）, please search ASIN : B07GSYR1CZ

User questions & answers

• "4+1" pcs mini tool holder and boring bar set
• TCMT21.5 Insert
• Versatile and economical. Screw Size: M2.5x 6
• STNCR06-2, STACR06-2, STECN06-2, STDCR06-2, S06H-STFCR2
• Packed in quality storage case

Product features

Features:

• 3/8" Shank Diameter
• Fit carbide inserts TCMT21.5
• Packed in a quality storage case

Specifications of each holder:

The triangle carbide TCMT inserts help you save time and money. When a cutting edge becomes dull, you just need to rotate the insert in the holder to use the sharp edge. When you buy the replacement inserts, be noted that the larger nose angles and larger tip radii enable a stronger cutting edge, but they result in increased vibration and a rougher finish.

Product description

Converts your lathe's #2MT dead tailstock to a 1" x 8tpi threaded live tailstock. Mounts to tailstock with the included #2 Morse Taper arbor. After being mounted, tailstock is converted from dead to live and it will accept all 1" x 8tpi threaded lathe tool accessories. Ideal for an additional secure workpiece mount from tailstock end. Allows precision centering of spindles or dowels at the tailstock end. Provides the ideal system for the mounting of bowls for hollowing. Wrench is included.

From the Manufacturer

Live Tailstock Chuck Adapter-2MT tailstock mount, 1-Inch by 8TPI Chuck Mount. This unique adapter allows precision centering of spindles or dowels at the tailstock end. Also, it provides the ideal system for the mounting bowls for hollowing; after turning the outside of the bowl blank, turn a tenon on the bowl bottom. Then mount your chuck to the tailstock using this adapter; grabbing the tenon with the chuck while still attached to the faceplate. When the chuck and blank is remounted on the headstock, your bowl will be perfectly centered.

• Converts your lathe's #2MT dead tailstock to 1" x 8tpi threaded live tailstock
• Mounts to tailstock with the included #2 Morse Taper arbor
• After being mounted, tailstock is converted from dead to live and it will accept all 1" x 8tpi threaded lathe tool accessories
• Ideal for an additional secure workpiece mount from tailstock end; Allows precision centering of spindles or dowels at the tailstock end; Provides the ideal system for the mounting of bowls for hollowing
• Wrench is included

User questions & answers