12 best faceplate for wood lathe
A faceplate for a wood lathe is an essential accessory used in woodworking to secure and hold the workpiece in place while it is being turned on the lathe. Here's what you should know about faceplates for wood lathes:
Purpose: The primary purpose of a faceplate is to provide a flat, sturdy, and secure mounting surface for a workpiece on a lathe. It allows you to rotate and shape the workpiece as needed.
Design: A typical wood lathe faceplate is a circular metal plate with multiple holes, usually threaded, distributed evenly across its surface. These holes are used to attach the workpiece to the faceplate securely.
Attachment: To use a faceplate, you screw it onto the lathe's spindle or headstock. The workpiece is then attached to the faceplate by using screws or other fasteners through the holes in the faceplate.
Workpiece Variety: Faceplates are versatile and can accommodate a wide range of workpiece shapes and sizes. They are commonly used for turning bowls, platters, and other irregularly shaped objects.
Stability: Using a faceplate provides greater stability and control when turning larger or unbalanced pieces of wood.It minimizes the risk of the workpiece coming loose during the turning process.
Customization: Some woodworkers may customize their faceplates by adding wooden or rubber inserts to provide a more secure and non-marring grip on the workpiece.
Safety: When using a faceplate, it's essential to ensure that the workpiece is securely fastened to the plate. Always follow safety precautions when operating a lathe to prevent accidents.
Balance: Balancing the workpiece on the faceplate is crucial to avoid excessive vibrations, which can affect the quality of the turning and put stress on the lathe's motor and components.
Alternate Chucking Methods: While faceplates are commonly used, woodworkers may also use other chucking methods like scroll chucks or collets, depending on the specific requirements of the project.
Maintenance: Like any tool, faceplates should be kept clean and in good condition. Periodically check the threads and fasteners for wear and damage.
Accessory Options: Some lathes may have specialized faceplates with additional features, such as indexing holes for creating evenly spaced patterns on turned objects.
Compatibility: When purchasing a faceplate, ensure that it is compatible with your specific wood lathe model in terms of size and threading.
Faceplates for wood lathes are essential tools for woodturners, enabling them to securely mount and shape workpieces of various sizes and shapes. When used correctly and safely, they enhance the precision and efficiency of woodworking projects involving a lathe.
Below you can find our editor's choice of the best faceplate for wood lathe on the market
Steel Face Plate 1"-8 Threaded for Wood Lathe Turning (4")
Product description
4" Steel Face Plate 1-8 Threaded for Wood Lathe Turning
- 4" Diameter
- 1"-8 TPI mounting
- Machined steel construction
- Precision machined face with 1 ring
- 8 Screwholes - 4 rows of 2 at 90 degrees
User questions & answers
| Question: | Does this have a set screw to tighten onto the spindle |
| Answer: | No hole to lock it onto the spindle. |
| Question: | Will it fit on jet 1221 vs |
| Answer: | Yes it will the jet gas a 1inch by 8 thread per inch drive |
| Question: | What is the actual diameter of the 3" face plate? I need it to fit in a pocket made by a 3" forstner bit. My " 3 inch" face plates are 3 + inch |
| Answer: | Can't day if this will help- I bought a 4 inch face plate with two 4 hole bolt circles. The diameter was 3.992". So if the manufacture holds the tolerances then you might expect the 3 inch item to be slightly under 3 inches. If you found that it was slightly over size could you install it on your lathe and trim the excess with a metal file resting on the tool rest. You will want a little clearance to allow for out of round or run-out after the mortise is cut. |
4" Steel Wood Lathe Face Plate, 1-1/4" x 8tpi Threaded
Product description
This is a well made, heavy faceplate. At 7/16" thick, it is rigid and well balanced.
- 7/16" Thick Steel Faceplate - Heavy and Rigid. 1-1/4" Thread Depth
- Locking set screw for use on reversing lathes
- Some Powermatic & Laguana lathes may require Maxwood 5144 spacer behind this faceplate (extra long spindle on these)
User questions & answers
| Question: | will this face plate fit on a nova galixi lathe |
| Answer: | Nova advertises 1-1/4x8 thread. This face plate is 1-1/4x8 thread. So yes it will fit |
| Question: | Does this face plate reqire anything else or can i just attach it right to my lathe |
| Answer: | As long as your lathe has a 1-1/4" x 8tpi shaft this will screw right on. |
| Question: | what is the width between the flats that are used for removal |
| Answer: | 42mm. We do sell a wrench on Amazon for this faceplate - here is the link: https://www.amazon.com/Maxwood-wrench-Plates-others-flats/dp/B07Y8TLWZT/ref=sr_1_2?keywords=maxwood+wrench&qid=1580622584&s=hi&sr=1-2 |
| Question: | RH or LH thread |
| Answer: | These are all RH thread. |
PSI Woodworking CF3J Lathe Faceplate for 1" x 8 tpi Spindle, 3" Without Screwchuck
Product description
3-Inch Steel Face Plate, with a 1" x 8 tpi mount. Use this spare faceplate for mounting extra bowl blanks. Perfect for all small bowl turning. Fits any lathe with a 1" x 8 tpi spindle thread. This 3-Inch diameter faceplate has 4 screw mounting holes, and two machined flats to grip with a wrench - easy on and easy off.
- Perfect for all small bowl turning
- Fits any lathe with a 1-Inch by 8TPI spindle thread
- 3-Inch diameter faceplate with 4 screw mounting holes
- Has machined flats to grip with a wrench - easy on and easy off
- All steel construction
User questions & answers
| Question: | do these have a setscrew to lock on spindle for reverse turning |
| Answer: | This one doesn’t have a set screw |
| Question: | Is the 3” plate exactly 3”?I did see a review saying that the 4” was 3 3/4 that is why I am asking |
| Answer: | I have a CF3SC that is the model with a screwchuck and it is 3" +/- 1/16 |
| Question: | Will this work on a shopsmith |
| Answer: | I think the Shopsmith Mark V lathe has a 5/8" spindle, which would not fit this Faceplate unless you get a 5/8" to 1" adapter. |
| Question: | Will it fit on a tool shop wood lathe |
| Answer: | I am sure that they come in different sizes but there a4e two popular sizes in the larger lathes, 1in 8, and 1 1/4 x 8. The larger size would require an adapter which is readily available. I have the larger one now but keep an adapter to make some of my old tooling fit. Also the 1x8 tooling is many times more easily found and therefore cheaper. |
6" Steel Wood Lathe Face Plate, 1-1/4" x RH 8tpi Threaded with set screw to lock on spindle for reverse turning
Product description
This is a well made, heavy faceplate. At 7/16" thick, it is rigid and well balanced.
- 7/16" Thick Steel Faceplate - Heavy and Rigid, 1-1/4" Thread Depth
- 8 Offset Screwholes on 2 guide rings for easy centering
- Locking set screw for use on reversing lathes
- Flat spots cut on back spigot for easy removal from lathe
- Some Powermatic & Laguana lathes may require Maxwood 5144 spacer behind this faceplate (extra long spindle on these)
User questions & answers
| Question: | It says right in the description that it has locking set screws, So does it have them or not |
| Answer: | The 6” Faceplate with 1-1/4” x 8tpi threading should have a single locking set screw to lock the faceplate to the lathe shaft. If by chance you have a recent model (this change was instituted about a year ago) that does not, please contact us through Amazon messaging. |
| Question: | How long is the threaded part? The spindle on my 3520B is 1.25" from the shoulder to the tip |
| Answer: | It's going to be a tad short on the 3520B - that lathe has the longest spindle of any on the market, and I've run into this once before. You will need to shim it a bit so it doesn't protrude through. |
| Question: | Wil this fit a jet 920n lathe |
| Answer: | It will fit any lathe if you buy the correct insert. I have a powermatic with 1 1/4 tip shaft. Works well with it. |
| Question: | Does this work on a vicmarc |
| Answer: | Yes, this will work on the Vicmarcs. |
MAXWOOD 4" Steel Wood Lathe Face Plate, 1" x 8tpi Threaded, with locking set screw (for reversing lathes)
Product description
This is a well made, heavy faceplate. At 7/16" thick, it is rigid and well balanced.
- 7/16" Thick Steel Faceplate - Heavy and Rigid
- 8 Screwholes - 4 rows of 2 at 90 degrees
- Flat spots cut on back spigot for easy removal from lathe
User questions & answers
| Question: | Can we get an update on the set screw question? Conflicting info here. Pics show set screw |
| Answer: | The set screw was added about 6 months ago. All current stock should have the set screw. |
| Question: | Does this require anything else or can i just slap it right on to the lathe |
| Answer: | You could just slap it right on to the lathe - - assuming that it has the same threads as your lathe spindle and assuming that you aren't trying to run it in reverse, and assuming that you have some screws to screw into the wood. |
| Question: | how do you know the thread sizeof your lathe |
| Answer: | I needed the faceplate to fit on an adapter for my Shopsmith lathe and the only adapter had only one thread size and so that is the one I bought. |
| Question: | Does this item have set screws for reverse sanding. Also, is there a way to remove it from lathe once it tightens |
| Answer: | No, there is no set screw. There are flats on the back @ 1-5/8" spacing...we hope to have some wrenches for these, but probably not till late fall. However, you could modify a Nova 23079 wrench (made for the Nova Chuck inserts) by grinding the opening slightly larger (stock it is just over 1.5"). |
Easy Wood Tools 3-1/2" Diameter with 1-1/4" - 8 TPI (F635) Bright Aluminum Faceplate
Product description
This 3-1/2” diameter x 1-1/4”” x 8 TPI Easy Wood Tool precision CNC machined aluminum faceplate can be screwed to bowl blanks then securely mounted on the lathe. This faceplate will meet the needs of the most demanding wood turner. CNC precision machined from solid aluminum, it will never rust or transfer stains when turning green wood. The aluminum body will greatly minimize tool damage if accidently contacted. Lower profile (1/2” thick plate) will keep work closer to the headstock bearing thus reducing vibration. Plate has 8 large countersunk screw holes that will accept #14 screws to maximize holding power and securely mount projects. Has 5/16” spanner hole on plate for easy removal using lever bar (not included). Includes spindle washer to allow easy removal of chuck from the lathe. Hub is laser etched with thread size for quick identification. Set screws allow you to run lathe in reverse (sanding only), excludes 1"x 8 TPI x 2" Faceplate.
- Easy Wood Tools 3-1/2” diameter x 1-1/4” x 8 TPI Easy Wood Tool precision CNC machined aluminum faceplate. Comes with Set Screws, 8 Large Mounting Screw Holes and Spanner Hole
- Our Aluminum Easy Faceplates have a shorter overall length to keep your work close to the headstock for less vibration and safer turning.
- Manufactured to high tolerances from corrosion-resistant, solid aluminum bar.
- Lasered hub - quickly identify thread size. Set screws allow you to run lathe in reverse (sanding only), excludes 1"x 8 TPI x 2" Faceplate.
- Designed and Manufactured 100% in the USA
User questions & answers
| Question: | Are the threads left-hand or right-hand |
| Answer: | They are right-handed. What kind of lathe uses left-hand threads? |
| Question: | What is the diameter of the screw holes? Will they accept #12 screws |
| Answer: | The holes are 1/4" in diameter and the countersinks are 7/16" at the widest point so I think #12 screws would work fine. I didn't have any #12 screws to be sure. |
4" HD Steel Wood Lathe Face Plate, 3/4" x 16tpi Threaded
Product description
This is a well made, heavy faceplate. At 3/8" thick, it is rigid and well balanced.
- 3/8" Thick Steel Faceplate - Heavy and Rigid
- 4 Screw Holes
- Flat spots cut on back spigot for easy removal from lathe
User questions & answers
| Question: | Will this fit the shop Fox 1704 lathe |
| Answer: | Yes, it should lwork on that lathe. |
| Question: | I have a craftsman 12” lathe model # 113.23800. Will this plate fit this |
| Answer: | Based on the Owners Manual on your lathe, the spindle shaft is a 3/4-16 OD thread. That is compatible with this face plate. I have a model 113.228162 which appears to be identical to yours. This plate worked great on my lathe. Good Luck. |
| Question: | What is the bolt circle pattern diameters |
| Answer: | Outside 3-3/8", inside 2-1/8". |
| Question: | is this a left hand thread faceplate |
| Answer: | No, it's standard RH thread. Threads directly on to my older craftsman 12" lathe. Model 113.23801. Great for turning a small bowl. |
Hurricane Turning Tools, 6" Steel Lathe Faceplate, 1" x 8TPI
Product description
Hurricane Standard Series faceplate for Mid-size and Mini lathes. These are made of steel with mounting holes for attaching your wood blank for turning on your lathe
Features:- Faceplate for Mid-size and Mini lathes
- Faceplate Diameter: 6"
- 1" x 8 TPI - Thread Mount
- Material: Steel
- Has mounting holes to attach your wood blank for turning on your lathe
Hurricane Turning Tools is a premium brand of tools and accessories meeting the needs of woodturners and woodworkers. Hurricane Tools include woodturning tools, wood lathe chucks and jaws, drill bits and Hurricane Abrasives. Hurricane products are made in the USA and throughout the world, balancing the need for both high performance and affordable products.
- Faceplate for Mid-size and Mini lathes
- Faceplate Diameter: 6"
- 1" x 8 TPI - Thread Mount
- Material: Steel
- Has mounting holes to attach your wood blank for turning on your lathe
User questions & answers
| Question: | Does this have set screw holes for reverse operation |
| Answer: | Yes. According to my husband who uses the faceplate, it does have one set screw hole for reverse operation. |
| Question: | Is this a left hand thread |
| Answer: | No |
| Question: | Does the 6in face plate come with left han threads |
| Answer: | Nope not this one |
4" Steel Wood Lathe Face Plate, 5/8" Plain Bore (to fit Shopsmith type machines)
Product description
This is a well made, heavy faceplate. At 7/16" thick, it is rigid and well balanced.
- 7/16" Thick Steel Faceplate - Heavy and Rigid
- 8 Screwholes - 4 rows of 2 at 90 degrees
User questions & answers
| Question: | How many TPI is the threading |
| Answer: | This is a plain bore faceplate with no threading. It is intended for lathes like the Shopsmith with a smooth spindle. It is secured with a set screw. |
PSI Woodworking LSR3 Wood Lathe Steady Rest
Product description
Turn and support your long slender spindles while eliminating bowing and vibration. The Stead-Fast Steady Rest adapts to any split bed or double rail midi lathe for ultimate control of delicate spindles. Easy installation. Mounts in the channel of any split bed or double rail lathe. When mounted, it sits 12. 75" high from top of lathe bed. Includes all necessary hardware and wrench. non-marking wheels apply multi-point ball bearing spindle support. Adjustable wheel placement allows for spindle support for workpieces down to 1/2" diameter. Great for lots of woodturning projects like baseball bats, table and chair legs, and other long spindles.
- Fully adjustable wheels easily adapt to any position or spindle diameter down to 1/2".
- 3-point ball bearing spindle support.
- Non marring soft wheels.
- Mounts in the channel of any split bed or double rail lathe.
- Compatible with Jet, Delta, and Turncrafter Pro Midi lathes with extension beds.
User questions & answers
| Question: | Horizontal thickness. Yes, normally goes on the top of the bed. My bed is round, so it would have to go under the bed with 0.5" clearance |
| Answer: | Yes, it's a one piece unit |
| Question: | Will this fit my Rikon mini lathe |
| Answer: | No, it has a #1 tapered shank. Good only for drill press or lathe. |
| Question: | Will this work on a Delta |
| Answer: | Yes, the drill chuck has JT 6 mount (Jacobs Taper 6) on the back and the shank is MT2 to JT6. |
| Question: | What is maximum? I'll guess and say 6 inches |
| Answer: | If it is MT2 the dia of the spindle hole of the drill press shall be 0.70". |
Hurricane Turning Tools, 4" Steel Lathe Faceplate, 3/4" x 16TPI
Product description
Hurricane Standard Series faceplate for Mini lathes. These are made of steel with mounting holes for attaching your wood blank for turning on your lathe.
Features:- Faceplate for Mini lathes
- Faceplate Diameter: 4"
- 3/4" x 16 TPI - Thread Mount
- Material: Steel
- Has mounting holes to attach your wood blank for turning on your lathe
Hurricane Turning Tools is a premium brand of tools and accessories meeting the needs of woodturners and woodworkers. Hurricane Tools include woodturning tools, wood lathe chucks and jaws, drill bits and Hurricane Abrasives. Hurricane products are made in the USA and throughout the world, balancing the need for both high performance and affordable products.
- Faceplate for Mini lathes
- Faceplate Diameter: 4"
- 3/4" x 16 TPI - Thread Mount
- Material: Steel
- Has mounting holes to attach your wood blank for turning on your lathe
User questions & answers
| Question: | Does the 3/4” x 16 tpi have fine threads? we ordered the 4” steel 1”x8tpi and it is too large for our shaft and the threads too coarse |
| Answer: | I expect this will do the trick for you; it has finer threads and is narrower. Most modern lathes use the 1" x 8tpi shafts; most older models I have run across use 3/4" x 16tpi, like this. |
Hurricane Turning Tools, 4" Faceplate/Screw Chuckn++, 1" x 8TPI
Product description
Hurricane Standard Series faceplate for Mid-size and Mini lathes. These are made of steel with 8 mounting holes and 1" long screw chuck for attaching your wood blank for turning on your lathe.
Features:- Faceplate for Mid-size and Mini lathes
- Faceplate Diameter: 4"
- 1" x 8 TPI - Thread Mount
- Material: Steel
- Has mounting holes and 1" long screw chuck to attach your wood blank for turning on your lathe
Hurricane Turning Tools is a premium brand of tools and accessories meeting the needs of woodturners and woodworkers. Hurricane Tools include woodturning tools, wood lathe chucks and jaws, drill bits and Hurricane Abrasives. Hurricane products are made in the USA and throughout the world, balancing the need for both high performance and affordable products.
- Faceplate for Mid-size and Mini lathes
- Faceplate Diameter: 4"
- 1" x 8 TPI - Thread Mount
- Material: Steel
- Has mounting holes and 1" long screw chuck to attach your wood blank for turning on your lathe
User questions & answers
| Question: | what size is Mid-size or Mini lathes |
| Answer: | Regardless of the size of your lathe, this face plate is specifically for a lathe with a 3/4” x 16TPI threaded arbor. It will only fit on that size. Again the arbor (the motor driven spinning threaded part of your live center)of your lathe must be 3/4” x 16TPI to use this faceplate. |
| Question: | What size screws will it take to hold the face plate to the block |
| Answer: | I use steel #12 flat head Phillips screws 1 1/4 inch long. |
| Question: | I have an older craftsman lathe. Will this fit |
| Answer: | Hello, You would have to make sure that your spindle thread is 1" x 8 TPI, many older Craftsman lathes are 3/4" x 16 TPI Thanks for your interest |
| Question: | do you have a face plate with centering hole thats 1 1/4 8 TPI, in 3" and |
| Answer: | Yes |
Latest Reviews
View all
Razer Lighted Keyboards
- Updated: 07.03.2023
- Read reviews
Newborn Boys
- Updated: 23.01.2023
- Read reviews
Sports Fan Cufflinks
- Updated: 12.04.2023
- Read reviews
Print Wear Clothing Friend T Shirts
- Updated: 21.05.2023
- Read reviews
Generic Friend For Teen Girls
- Updated: 26.02.2023
- Read reviews