13 best kreg woodworking tools

Product description

The Kreg jig® K4 is the perfect choice for do-it-yourselfers and anyone new to pocket-hole joinery. Whether you’re building your first set of garage storage shelves or making simple repairs around the house, The Kreg jig® K4 can help you finish the job in less time, and with FAR less effort than you ever thought possible. Its simple design gives you the confidence you need to get started, and you’ll have your project finished in no time with joints as easy as "drill. Drive. Done!"

From the Manufacturer

The Kreg Jig is the perfect choice for DIY'ers and anyone new to pocket-screw joinery. Whether you're building your first set of garage storage shelves or making simple repairs around the house, the Kreg Jig can help you finish the job in less time and with far less effort than you ever thought possible. Its simple design gives you the confidence to start the project and with joints as easy as "Drill. Drive. Done!" You'll actually want to finish it. The Kreg Jig makes every joint you build faster and stronger, but perhaps more importantly, it makes them easier. Simple two-step operation, combined with easy thickness adjustments, built-in depth-setting-gauges, a large clamping recess and our patented 3-hole drill guide, make this the most easy-to-use Kreg Jig we've ever made. Includes everything you need to get started with pocket-screw joinery, including Kreg Jig, stepped drill bit, 6-inch square driver, dust collection shroud, starter screw set, starter plug set, skill builder DVD and quick-start guide, all inside a compact and durable carrying case.

• 3-Hole drill guide for pocket holes, for use with materials from 12 to 38mm thick
• Removable drill guide block doubles as a repair tool; Drill Guide Spacings: 9/16", 7/8", 17/16"
• Large clamping recess to secure your jig; Removable Drill Guide for benchtop and portable use
• Requires no glue, no complicated math, and no small army of clamps.Clamping Method:Toggle clamp on benchtop base
• Includes Kreg Jig K4, stepped drill bit, 6 inch square driver, starter Kreg Screw set, pocket-hole plug set

User questions & answers

Question:	I am needing a jig for 4(in.)x4(in.)x10(ft.) wood post. i realize this wouldn't work, but can anyone recommend one that can? thanks in advance
Answer:	As it states in the description, deflects chips and connect 2 grippers for better control of large pieces. Check the video: https://d1y6jrbzotnyjg.cloudfront.net/V3MSA/cfd7863774ee4067ae4a3c816a4fd10e/V1/ad7607ded66c4f77898c5981786beb86/ShortForm-Generic-480p-16-9-1409173089793-rpcbe5.mp4?Expires=1552759553&Signature=TXTx0fF1p4Uzt68tNOVHzaO1K4UUbz1qJoX9WVsDe~ReJnbou3MLRqyMf2qM06MydXQMud4lf2zChbFp-YQbr7t731MJ2pn~tgK64bjXMcE1ko8UnnYlzgaBtLVGA4l4YXyBvhEk9ZREzLwvu0hXURT9-OHG-TkCcq1XN-stsmg_&Key-Pair-Id=APKAJ62XWKZ35EOVO4XA
Question:	Is it possible to use this kit with material thicker than 1-1/2 inches? I ask because the site offers spacer blocks for user with "thicker" material. It would be nice to use the kit on 2x4s for example
Answer:	The "deflector plate" is actually a gravity operated "heel" that simply drops down and hooks on the material you are pushing. There's considerable grip in the rubber pad portion of the push block, but when you reach the end of a board or similar, the heel drops down and catches on the edge of wood, permitting easy/secure push through of the wood.
Question:	how would i get a long piece of wood to position in the clamp, like an 8ft 2x4? I see short pieces stand up in the jig, would a long board be flimsy
Answer:	We have a video showing how to build a GRR-RIP BLOCK Stand that magnetically mounts to your jointer! Watch it on YouTube here: https://youtu.be/3qUBe90H-Q8
Question:	What country is this made in
Answer:	I don't have the Bench Dogs push pad but I do own 2 of these Gripper pads as well as several "plain" push pads. In my experience, the GRR-Rip Block is different in 2 ways. The Gripper has 4 "heel hooks" that hang over the edge of your work piece to get a better push on the end stock. And it can also be used on its edge (it have been formed with a 90 degree angle) so you can push stock on a router table or to stabilize wood while re-sawing on a band saw (and this is where those hooks really help). But the price of the Gripper is 2-1/2 times the Bench Dog, so the question would be: is the GRR-Rip Blockr twice as good as the Bench Dog. And I would probably say no to that. But the ultimate decision is of course yours. Hope this helped.

Product features

Kreg Jig K4

Product description

The Concealed hinge jig takes the guesswork out of installing cabinet doors using concealed hinges. This economical, easy-to-use jig ensures accurate hinge alignment, so you can install doors that fit great and work well. Plus, the concealed hinge jig works with an ordinary drill and the included carbide Tipped bit.

• Make cabinet door installation easy! Get drill press accuracy with any hand drill
• Accurate hinge positioning with built-in indexing tabs
• Repeatable results with built-in measuring scales
• Reliable drilling with bit guide and stop Collar
• Simple to use with any drill—no special tools needed

User questions & answers

Question:	Replacing 10yr old 1.25" overlay euro hinges w/ blum b039c355b.20 1.25" o-lay soft close: exist. hole too shallow, will this jig have correct depth
Answer:	The KREG SDK-C2SS-700 2-Inch, #8 Coarse are Stainless Steel Screws. These are a great buy at $56.99 for a quantity of 700. If you priced Stainless Steel Deck Screws at Home Depot they would cost you a small fortune.
Question:	Is it possible to use 35mm concealed hinges on a door with a 1x2 frame? I keep drilling through the edges no matter what setting I try
Answer:	The screws P/N SDK-C2SS-700 are made in Taiwan. We constructed a 25ft X 30ft deck with ACQ/QCA materials, and consumed approximately 6 boxes of 700ct kreg screws using the Kreg drivers with no problems with the drive, or breaking off.
Question:	According to amazon, $29 option includes jig and 35mm bit(see more prod' details)why wld i want $44 or $45 option? what's different or extra
Answer:	Don't know, but if I were to guess I would say the lesser grade "304" otherwise Kreg would probably advertise them as "316."
Question:	Does this come with the drill bit
Answer:	Hello,The answer is no unless you move the jig for every hole you need to drill. Like Jeff said you would have to improvise for this size of handle.Thanks,Josh

Product features

Kreg Concealed Hinge Jig

Make cabinet door installation easy! Get drill press accuracy with any hand drill.

Product description

The New Kreg Jig K5 Is Packed With Features Your Are Sure To Appreciate. It Comes With A Convenient Front-Mounted Clamping Handle, And It'S Connected To A Ratcheting Clamp Mechanism That Adjusts Without Tools Or Lock Nuts. The Quick-Release Drill Guide Block Makes Set Up Simple, And The Removable Support Wings Support Large Work Pieces And Provide Additional Storage Inside. Dust-Collection Is Also Standard, With A Swiveling Dust-Collection Port For Ease Of Use. Adding In The Adjustable Workpiece Stop, Hex-Shank Drill And Driver Bits, A Screw-Selection Chart, And The Durable Construction You Expect From Kreg, And You Have The Most Advanced Kreg Jig Yet.

• The new Kreg Jig K5 is packed with features your are sure to appreciate. The clamping method is Toggle clamp on benchtop base
• It comes with a convenient front-mounted clamping handle, and it's connected to a ratcheting clamp mechanism that adjusts without tools or lock nuts
• The quick-release Drill Guide Block makes set up simple
• Front-mounted clamp handle makes clamping easy
• Ratcheting clamp mechanism adjusts without tools
• Quick-release pin holds drill block in place, and can't get lost
• Storage Wings provide built-in storage for bits, screws, accessories
• Stop-Collar Setting Block makes drill bit setup easy

User questions & answers

Question:	beginner easy
Answer:	If you mean a scribe or a wheel, then no. There is a little divot in the end of the ruler where you can rest the tip of a sharp pencil to mark a line. That would be accurate enough for most work.
Question:	How long does the specialized drill bit last? Looks like you must buy from Kreg. Also, can I find these screws elsewhere
Answer:	Not at all. Has 90 and 45 degrees only. ..and even in 90 and 45 it's works bad. .because it has this movement even when you tite it with the gold screw. ..it can be 88 or 92 so it's not square. ...
Question:	i'm having difficulty deciding between this and the K4MS. Both around the same price although the K4MS seems to have extra items. Suggestions
Answer:	The Kreg Foreman requires the use of the Kreg Quik-Bit which is included in the Kreg K5 Jig Package.
Question:	Have you tried the K4 as well? Which do you like better
Answer:	I started with the Jr. then moved to the K5 Master system. I am about to move up to the Foreman because I'm doing so much. This will be much easiest than using a drill, it will take it out of you after hours of drilling pocket holes even on the K5.

Product features

Kreg Jig K5

Advanced Features for Building with Wood.

Fast, Simple Setup

When you’re ready to get started building, the Kreg Jig K5 makes it simple. Just select your screw based on the thickness of your wood, set the stop collar using the drill bit setup block, pull the spring-loaded pin to adjust the drill-guide block, and then set the workpiece clamp.

Easy Thickness Adjustment

The Kreg Jig K5 offers our simplest workpiece-clamping system ever. The ratcheting clamp simply slides into place against your workpiece. Then, you lift the handle until you hear and feel two 'clicks' and that’s it. Now your clamp is set until you change to a different material thickness.

Support with Built-In Storage

Two large support wings can be attached to both sides of the K5 base. This way, long workpieces get solid support and won’t tip. Plus, there’s a large storage compartment under the lid in each wing where you can keep your drill bits, screws and accessories close at hand, but out of the way.

Swiveling Dust Collection

The Kreg Jig K5 comes with a removable dust port that swivels from side to side so that you can position it exactly where you want it, and then attach it to a standard vacuum house. This keeps your work area free of chips and debris, makes drilling easier, and prolongs drill bit life by reducing heat.

Classic Coffee Table

Garage Organizer

Modular Media Center

Coffee Table with Storage

Entryway Organizer

Glass-Door Media Center

Product description

Take control of your table-mounted router for quick, accurate, reliable, and repeatable setups



The Precision Router Lift helps you elevate your routing capabilities by providing precise control when making router setup changes or changing bits. The lift replaces the standard insert plate in a router table (the 3⁄8" x 91⁄4" x 113⁄4" plate fits all Kreg router tables plus many popular brands) and accepts any of 20+ popular router models—without the need adapters or modifications—in a high-performance carriage that you raise and lower from above the table.



With the Precision Router Lift, there’s no more reaching under the table to make adjustments or change bits, plus vastly improved control over all adjustments, large or small. Instead, simply use the lift’s included crank to adjust the height of your router bit easily and precisely from above the table. This makes adjustment fast, simple, and accurate so you can set up your router faster, and then dial in the exact bit height you require using the Precision Router Lift’s built-in micro-adjustment scale. The lift also simplifies changing bits by allowing you to do that from above the table, as well.



Precision is more than part of the name with this lift, too. The Precision Router Lift is designed so that every full revolution of the adjusting crank moves the carriage—and your bit—exactly 1⁄16", though adjustments down to thousandths of an inch are possible. A built-in micro-adjust scale can be zeroed out at any point to establish your baseline bit setup, so you can make exact bit height changes, and readjust to the exact same setting confidently every time for repeat cuts.



Whether you’re upgrading an existing router table, setting up a new one, or even building your own custom table, the Precision Router Lift is the perfect routing accessory. It offers the precision you demand to achieve exacting routing standards, along with the fast, easy performance you want in order to spend less time setting up and more time routing.

• Allows precise above-the-table setup changes for table-mounted routers
• Above-table collet access allows fast, easy, above-table bit changes
• 3⁄8" x 9 1⁄4" x 11 3⁄4" (9.5 mm x 235mm x 298mm) Hard-anodized aluminum plate won’t Sag, resists scratches
• Fits all Kreg Router tables and many competitive brands
• Bearing-guided carriage provides smooth operation

User questions & answers

Question:	Has anyone put a portamate router in kreg router lift? Pretty sure it's the same diameter as the porter cable
Answer:	Hello, If the diameter of that port-a-mate router is the same as the porter cable 7518 and there is no obstructions on that motor, you should not have a problem with it fitting. Thank You, Billy H Kreg Tech Support
Question:	How many inserts come with the lift
Answer:	Hello, There will be three Insert Rings that are included in your Lift. The Sizes are 1" , 1-3/16" and 2-5/8". Thank you, Billy H Kreg Tech Support
Question:	How far the the lift travel up and down
Answer:	The Kreg Precision Router Lift will have three inches of travel. This will allow bit changes above the table.
Question:	Does the kreg prs5000 lift fit to the bosch 1617evs router
Answer:	Yes, 1617 fits perfectly. Just make sure you follow the directions closely... meaning loosen the collar fully first, then insert the clamp bolts at position 5 on all four clamps, then slide the 1617 in, pull it 1/16” up from the stop, hold and tighten the collar with the lift wrench.

Product features

Precision Router Lift

Product description

The foreman pocket-hole machine (item# DB210) makes it possible for woodworkers, cabinet shops, contractors, and dedicated do-it-yourselfer to complete projects using Kreg pocket-hole joinery with twice the speed and half the effort of a standard pocket-hole jig. Plus, the new Foreman pocket-hole machine is built with the same quality and features of its predecessor, (item# DB110), but costs less than half the price. Your will immediately appreciate all of the great features the upgraded Foreman has to offer. With one pull of the handle, They can start the motor, clamp their workpiece, and drill perfect pocket holes. The adjustable fence positions The workpiece for precise pocket depth, and a pair of adjustable stops provide repeatable accuracy. A powerful 110-Volt motor enables fast drilling, and a quick-change chuck allows for fast, tool-free bit changes. Plus, the new Foreman is the first Kreg pocket-hole machine that can create all three types of Kreg pocket holes: standard, micro-pockettm, and HD (heavy-duty). please note: Micro and HD bits are sold separately. Combine these innovative features and you have the Kreg Foreman DB210 - The versatile, affordable, high -speed solution for pocket-hole construction.

• Single-step operation starts motor, clamps workpiece, and drills pocket holes
• Creates all Kreg Joint sizes: Standard, Micro, and HD
• Powerful 110-V, 5.0-AMP, 2,800 RPM motor provides fast drilling
• Adjustable stops for repeatable accuracy. Clamping Capacity-Material from 1/2 inch to 11/2 inch thick (13-38mm)
• Quick-change chuck allows for fast, tool-free bit changes.Compatible with the Micro-Pocket Bit and Heavy-Duty Bit

User questions & answers

Question:	can you use the 3/8 drill from a k5 jig in it
Answer:	This shank is 1/4" diameter x 2-3/8" long. It comes with the 7/8" bearing to give you 1/2"depth of cut when using a standard 1-7/8" diameter slotter. For a complete description of any Whiteside product and an actual picture, please visit our Amazon storefront or our eoasaw website. Please let me know how we may be of assistance. Thanks, Thom
Question:	Should I get this now, or get the K4MS Master System first? We're just starting our tool collection
Answer:	1/4 inch.
Question:	Is it possible to use a plug cutting bit with this machine
Answer:	I do not know, but the info I have I hope it helps. I used it to add the trim to arcade cabinets
Question:	How do you drill a 45 degree on a deck top plate
Answer:	Unfortunately no, the dremel 3000 has a maximum shank siZe of 1/8 however this bit has a 1/4 shank.... You will need a router....

Product features

Foreman Pocket-Hole Machine

Product description

Turn an ordinary Circular saw into a precision edge-guided cutting tool



great projects start with high-quality cuts, and you can make those cuts—more easily than you ever imagined—using your Circular saw plus the Rip-Cut Circular saw edge guide.

with a built-in measuring scale, You don't have to measure and mark each cut, either. Just Lock the saw sled at your desired cut width, and you're all set, Whether you need to cut one piece or make multiple pieces of the exact same size. Plus, the Rip-Cut makes it easier to cut down large sheets by yourself.

• Make rip cuts and crosscuts up to 24" Wide
• Cut multiple pieces to the same size With just one setup
• Use the oversize edge guide for precise control throughout the cut
• Eliminate need for marking, measuring, and layout lines
• Take your saw to the material instead of having to take your material to the saw

User questions & answers

Question:	Will this work with a ryobi 5-1/2” p
Answer:	Yes!! We can do this for you, sure thing!! BUT- you must order it this special way where it says it's being FULFILLED BY EFYTAL JEWELRY and NOT 'fulfilled by Amazon'. To order: If you purchase this item as is, it will come from the Amazon warehouse and we won't be able to make you a custom item. In order for it to come out of our studio where we can make you this custom necklace, please follow these directions: 1) click on the listing 2) scroll over to the right and down where it says: 'Other Sellers on Amazon' (below the add to cart area) 3) click on the link that says '2 new' 4) select the 2nd one, the one that says it's being fulfilled by Efy Tal Jewelry's studio...even though it looks like it'll take longer to get there- THIS IS THE CORRECT AND ONLY OPTION FOR THIS TO WORK. 5) in the gift message field please type: " please make 22" in total length " (or whatever length you desire). You are welcome to email me the order # after you place the order through Amazon Buyer Seller Messaging. We won't charge you extra for this change :)! If you place your order today, it will ship tomorrow/on the next business day. Thank you so much!
Question:	Does this only work on full-size saws or will it work with compact saws like https://www.amazon.com/gp/product/b072vltg4s
Answer:	Hi there! Thanks for checking out my jewelry. Yes the entire necklace is made up of sterling silver. THanks for your question. Efy
Question:	Will this work with an old 7.25" porter cable frame saw model 743? i just want to make sure. i love my old saw, i'll keep it forever
Answer:	Hi there Thank you for your question. This necklace is made on an 18" chain and with the component it will measure 19". Although we can customize this necklace to measure a total of 16.5 or we can add a jump ring to the chain so that you can make it smaller and measure 16.5. Here is how to place a custom order through one of our studios. In order for it to come out of our studio where we can make you a custom chain or add a jump ring, please follow these directions: 1) click on the listing: https://www.amazon.com/dp/B0756LSQMG 2) scroll over to the right where it says: 'Other Sellers on Amazon' (below the add to cart area) 3) click on the link that says '2 new' 4) select the 2nd one, the one that says it's being fulfilled by Efy Tal Jewelry's studio. 5) in the gift message field please type: "please make this 16.5 or add a jump ring at 16.5 ".....please let us know one or the other (if by any chance you miss the gift message part, no worries, just send us another email. Please be sure to send us another email either way after you place your order requesting this) We won't charge you extra for the change! If you place your order today, it will ship tomorrow/on the next business day. I hope that helps! Thank you so much! <3 Efy Efy Tal Jewelry
Question:	Will the kreg KMA2685 guide fit for a dewalt circular saw
Answer:	HI, it's one necklace with 3 rings :)

Product features

Rip-Cut

Universal Sled is compatible with the Kreg Accu-Cut

The Kreg Accu-Cut is great for making straight, accurate, splinter-free cuts in plywood and other sheet goods. The saw sled accepts almost any circular saw, which allows you to turn your ordinary saw into a precision cutting tool.

One great feature of the Accu-Cut sled is that you can remove it from the Accu-Cut track, and install it on any Kreg Rip-Cut. The sled slides right onto the Rip-Cut Guide Arm and locks in place. That allows you to make long cuts, such as ripping a sheet of plywood lengthwise, with the edge-guided accuracy of the Rip-Cut.

Best of all, switching from the Accu-Cut to the Rip-Cut doesn’t require any changes to the setup on your Accu-Cut sled. No moving the saw or adjusting anything. So, when you’re ready to switch from edge-guided cutting back to track-guided cutting, all you have to do is slide the sled off the Rip-Cut, and set it back in place on the Accu-Cut track.

Product description

Classic face clamps are designed for creating perfectly flush Kreg joints, and they work great for lots of other shop and project tasks that require solid clamping without marring. These clamps feature large clamp pads that distribute clamping force evenly, and hold pieces flush during assembly. When used in Kreg joinery, The extra-large clamp face gets positioned on the “show” side of the joint. This classic face clamp offers increased reach and clamping capacity. Features a 3" Reach and clamps materials up to 23/4" Thick.

From the Manufacturer

Unique clamp designed specifically for Pocket-Screw Joinery. Used primarily for securing individual joints while Pocket-Screws are being driven. The large face of the clamp keeps the joint perfectly flush. Clamp can also be used to secure portable Kreg Jigs to the work piece. Best for a majority of Pocket-Screw applications. 3-Inch reach, will handle work pieces up to 2-3/4-Inch thick.

• Unique Clamp designed specifically for pocket-screw joinery
• Used primarily for securing individual joints while pocket-screws are being driven
• The large face of the clamp keeps the joint perfectly flush
• 3" Reach (76mm); clamps materials up to 23/4" Thick (70mm

User questions & answers

Question:	Where are these made
Answer:	It is designed to cut wire,but not metal straps.
Question:	Will this fit with the R3 Kreg system on a 4x4? Or do I need the larger clamp
Answer:	The Cutting Aluminum inserts which fit this face mill is #0058-1604 APKT 160408 LH Carbide Insert, YD101 Coating, you can find them on Amazon.com, customers were happy with the performance of this item. Or you can find the other brand of the APKT1604 Aluminum Cutting inserts. Thank you!
Question:	The R3 jig's ridge/pad arrangement appears designed to hold one of the pads from this faceclamp. Does it stay on the clamp securely
Answer:	It is R-8 taper with 7/16"-20 thread for standard drawbar.
Question:	I'm sure this is a dumb question, but I am a beginner. I can't get the clamp to actually clamp anything. What am I missing
Answer:	Not sure do not remember what was on packaging

Product features

Classic 3" Face Clamp

Product description

From The Manufacturer: The Kreg Multi-Mark Is An Incredibly Handy Multi-Purpose Marking And Measuring Tool, Perfect For A Wide Variety Of Household And Jobsite Applications. The Multi-Mark Features Three Different Scale Configurations, A Built-In Level, A Handy 3/16” Reveal Gauge, And Much More… Whether You Need To Transfer A Measurement For That Last Ceramic Tile, Layout Some Mitered Corners, Or Just Straighten A Few Simple Picture Frames, The Multi-Mark Is The Only Tool You’Ll Need To Get The Job Done. Features: , 3 Scale Configurations , Imperial And Metric Scale , Built-In 3/16" Reveal Gauge , Torpedo Level , Durable And Compact Design.

From the Manufacturer

The Kreg multi-mark is an incredibly handy multi-purpose marking and measuring tool, perfect for a wide variety of household and jobsite applications. The multi-mark features three different scale configurations, a built-in level, a handy 3/16-Inch reveal gauge. With this tool you can layout mitered corners, set 3/16-Inch reveals, transfer measurements , align/square your projects, set bit/blade heights , layout wall studs, use as a basic rule, marking for layout and use as a simple level.

• From the manufacturer: The Kreg Multi-Mark is an incredibly handy multi-purpose marking
• The Multi-Mark features three different scale configurations, a built-in level, a handy 3/16” reveal gauge
• Item is manufactured in United States
• Wide variety of measuring and marking functions
• 3 Unique scale positions
• 3/16-Inch offset for door trim
• Cumulative scale for transferring measurements
• Perfect for general layout

User questions & answers

Question:	Is it metal or plastic
Answer:	No, the DB210 can use the Micro and Heavy-Duty bits but not the plug cutters.Ben BolluytKreg Tech Support
Question:	Is the marking tool in imperical and metric
Answer:	The Kreg Foreman will only make 15 degree angled pocket-holes in material thicknesses from 1/2" to 1 1/2".
Question:	does it have a marking gauge for joinery
Answer:	the kerf is 1/4" also known as cutting length on this bit. the cutting depth is 1/2".
Question:	Is this in any way an angle finder too
Answer:	I would hazard a guess that if you want to cut deeper you would have to use a tool (bit) with a larger diameter cutting blade.

Product features

Multi-Mark

Product description

Cut perfect miters consistently with Kreg's Precision Miter Gauge System. A number of unique features makes this one of the most precise miter gauges on the market today. Factory calibrated accuracy starts with a gauge head that is machined on a computerized milling machine for absolute precision. An easy-to-read Vernier scale enables precise angle adjustments up to 1/10th of a degree. Five patented bar adjusters take up the play in the miter slot for a perfect fit. A 24" fence section with patented Swing Stop and self-adhesive measuring tape is included. Factory calibrated.

We’ve found that even on high-end saws, the miter gauge is sometimes not the best it could be – a situation easily resolved by the folks at Kreg. You probably know them for their ingenious pocket hole system, but this miter gauge is worthy of fame in its own right.

It’s not like any we’ve seen before, with a handful of features that work together to give you the ability to set an angle cut accurately to 1/10th of a degree – and beyond that, to adjust to 1/100th of a degree (hats off to you if you’re that precise!)

Setup takes a little bit of time and patience, but the results are well worth it. It’s got a super accurate length scale with a magnifying lens cursor, similar to those on good table saws, and the curved flip stop can be used with the fence as is, or you and a pair of pliers can modify it easily for permanent use with a sacrificial fence. This clever curved design lets you slide your stock right under it. The slot bar has five patented nylon screws along its length that let you custom fit it to your table saw slot, completely eliminating any play.

It’s got the positive stops you expect, at 0, 22.5, 30 and 45 degrees, and they’re marked by preset holes that accept a tapered brass pin, which locks in the angle with absolute precision. The gauge is marked with diamonds every five degrees for great legibility, too. But what sets this gauge apart from the pack is its Vernier scale, allowing you to set any angle in tenth-of-a-degree increments. Unless you have a degree in mathematics, don’t try to understand the process – it’s confusing and non-intuitive. Instead, just follow the step-by-step directions, and you’ll get absolute accuracy every time.

And when Kreg calls something a "micro-adjustment" mechanism, they really mean micro. With this miter gauge, you can actually increase your angle by 1/100th of a degree by turning a nylon screw that increases the space between the fence and the gauge. For each .001 inch you put between the fence and gauge, you increase your angle by 1/100th of a degree.

Kreg’s really hit the accuracy bullseye with this miter gauge, and adding it to even a so-so saw will give you fantastic results. Take your time with setup and follow the directions for the Vernier scale, and you’ll be as taken with it as we are. -- Kris Jensen-Van Heste

From the Manufacturer

Cut perfect miters consistently with our Precision Miter Gauge System. A number of unique features make this the most accurate miter gauge on the market today. Precision starts with the gauge head that is machined on a computerized milling machine for absolute accuracy. An easy-to-read Vernier scale enables quick adjustment up to 1/10th of a degree to assure the perfect miter. Includes Precision Miter Gauge, 24-inch section of Heavy Duty Trak, Standard Flipstop and a self adhesive measuring tape.

• Factory Calibration. Guaranteed out of the box to .003 accuracy of 6-inches
• Gauge head is CNC machine perfectly square to the bar and table ( no stampings)
• Vernier scale allows fast, 1/10th-degree angle adjustments. Our extremely straight 24 inch (610mm) anodized-aluminum bar is 3/8 inch(9.5mm) thick by 3/4 inch(19mm) wide and features five bar adjusters that you can use to eliminate “play” in the miter slot with the turn of a screwdriver
• Microadjuster allows additional angle adjustment to 1/100th degree
• Positive stops at 0, 10, 22-1/2, 30 and 45-degrees; limited lifetime warranty

User questions & answers

Question:	Will this miter gauge fit the slot in a Sears
Answer:	The bit itself will last a lifetime as long as you do not abuse it or break the tip off. HOWEVER, regardless of what some have stated here, the sharpness of the bit itself is relative to the types of wood you use. In soft woods such as pine, it will stay sharp for quite sometime. However if it is used in woods that are abrasive such as qrt sawn white oak, or white oak in general, Bubinga, Purple Heart or other such woods, it will dull quickly and have to be sharpened. You can send the bit to Kreg and they will sharpen it for you for $10.00 bucks plus $10.00 shipping. That's $20.00bucks, but when you add in what it us going to cost to ship that one bit to them, which right now is $7.13 you are going to pay $27.13 for a bit that you can buy for much less. As a PROFESSIONAL Master Joiner and Cabinet Maker, I use this system quite regularly and have done so since Kreg first began to sell them. I know how to sharpen them and do not send them out, nor would I. It's not cost efficient.
Question:	Will this item work on a grizzly table saw go
Answer:	The "extra items" are some screws & plugs. Yes, there is some value, but it is limited. The K5 is an easier tool to use and you will need to purchase many more screws & plugs according to the way you use it. A handful of screws & plugs is nice to give you some idea of what is available, but will not last long. Frankly, I don't understand why they still price the 4 & 5 the same, or, even why the 4 is still offered.
Question:	Would this be good at doing wider board crosscuts
Answer:	I've used and owned various Kreg jigs (K2000, K3, K4 and K5). They have gotten better with each new model. An exception to this was the K3 versus the K4. I liked the K3 better than the K4 because of the clamping lever in the front (K3) versus the back (K4). The K2000 also had the lever in the back. It is better to have the clamping lever in the front especially when working with larger work pieces. It is good to see Kreg go back to the front lever. I like the K5 best because of the ratcheting clamp. You don't get a face clamp like you do with the K4MS Jig Master System, but the Automaxx clamps are better anyway. I like the 6" better than the 3" clamp. The right angle clamp works great for assembling cabinets also. If you are going to be doing small work (1/2" or less) get the Micro Drill Guide and large work (11/2" & larger) get the HD Jig. They will fit in the K3,K4, or K5 Jigs. To make a long story short get the K5 Jig over the K4 Jig.
Question:	Will this work with dewalt 10" portable table saw
Answer:	Both the blue body is plastic and a metal ruler with a brass screw to hold the ruler in the selected slot you choose from T square 45 angle or depth gauge Regards David

Product features

Precision Miter Gauge System

Why spend your time calibrating a miter gauge when you can get amazing accuracy right out of the box? Our Precision Miter Gauge System requires no calibrating, and features positive stops at 0°, 10°, 22½°, 30° and 45° to make it easy to cut accurate miters quickly.

Of course, when you do want to cut a more complicated angle, the easy-to-use Vernier scale allows for fast adjustments to 1/10th of a degree.

Plus, the Precision Miter Gauge System offers a long, anodized-aluminum fence and stop system that let you easily make accurate, repeatable cuts.

Perfect Miters, Fast!

We worked to build accuracy into every feature of this product, from the rugged aluminum fence to the solid yet versatile Swing Stop, to the easy-to-use yet amazingly accurate Vernier scale. With all of its great features, this miter gauge will give you better, more accurate cuts to ensure project success.

Precision Lens Cursor

Similar to the type of lens found on a quality table saw rip fence, the clear lens features a high-visibility red line that makes it easy to set the Swing Stop for precise cuts, time after time.

No Play in the Miter Slot

Our extremely straight 24" (610mm) anodized-aluminum bar is 3/8" (9.5mm) thick by 3/4" (19mm) wide and features five bar adjusters that you can use to eliminate 'play' in the miter slot with the turn of a screwdriver.

Swing Stop

The Swing Stop slides effortlessly along the fence of the Precision Miter Gauge and locks securely into place with the turn of a knob. It also features a curved foot that lets you easily swing the stop temporarily out of the way without having to remove it.

Product description

"The Do-It-Yourself Kreg Jig with Bonus Accessories The Kreg Jig K4 Master System is a great choice for any woodworking enthusiast looking for a complete set to get started building with Kreg Joinery. With its solid clamp, large clamping recess, dust collection attachment, material support stop, and removable 3-hole drill guide, this jig truly has it all. The Master System includes a Kreg Jig K4, Bonus Kreg Accessories: the Kreg Face Clamp, Portable Base, and more. Large Clamping Recess The Large Clamping Recess makes it easy to secure your jig to your workbench using Kreg multi-purpose Face Clamps or any common bar clamp or C-clamp. Sturdy Toggle-Clamp The Kreg Jig K4's rear-mounted clamp design has been around since the first Kreg Jig. It's a proven design, offering incredible rigidity and uncompromising workpiece hold-strength. Adjustments are as easy as releasing the locknut and rotating to the correct setting. 3 Tools in 1 Thanks to its removable Drill Guide, the Kreg Jig K4 Master System can serve as many different tools: a sturdy benchtop jig that utilizes the benchtop base for high speed pocket holes, a contractor-grade jig for work on the road through the use of the portable base, and a high-quality repair jig when you add spacer blocks to the bottom of the drill guide. 3-Hole Drill Guide The 3-hole Drill Guide lets you drill pocket holes in a wide variety of material widths and thicknesses—from 1/2"" to 1 1/2"" in 1/8"" increments. Every Kreg Drill Guide features a hardened-steel core, which carries a lifetime guarantee. The core shrouds the bit and supports the workpiece through 100% of the drill-stroke, resulting in minimal bit deflection, reduced tear-out, and a clean, pluggable pocket hole. Material Support Stop The Material Support Stop can be set at any distance from the jig to help you repeat the same pocket holes over and over again. The stop can also be swung out of the way to serve as a height support for larger panels. Glass-Reinforced Nylon Body The blue body of every Kreg Jig K4 is made from a heavy-duty, glass-reinforced nylon. This composite material offers the resiliency and flexibility you need without sacrificing the strength and durability Kreg customers have come to expect. Superior Angle Unlike competing jigs with a shallower angle of approach, the Kreg Jig K4 Master System features an optimized drilling angle, specifically designed to increase driving efficiency and minimize the overall size of the pocket hole. The result is a compact pocket hole, less than 1 1/2"" in size. Wood-Chip Relief The Kreg Jig K4 Master System includes one wood-chip relief hole for every Drill Guide hole, designed to keep the drill bit clear of excess wood chips, minimize drill torque, increase the longevity of your drill bits, and allow you to complete a perfect pocket hole in just one plunge. Featuring a removable drill guide for use with benchtop and portable bases, the Kreg Jig Master System is the ultimate pocket-hole jig, and a great choice for any woodworking enthusiast. For precision and accuracy, it offers 1/8-inch incremental settings for materials 1/2-inch to 1-1/2-inch thick and patented three drill guide fixed spacing on the drill guide. A dust collection shroud means no more woodchips, and the clamping recess allows you to use many different styles of clamps to secure your jig to the workbench. For peace of mind, the hardened steel drill guides are backed by a lifetime warranty."

Featuring a removable drill guide for use with benchtop and portable bases, the Kreg Jig Master System is the ultimate pocket-hole jig, and a great choice for any woodworking enthusiast. For precision and accuracy, it offers 1/8-inch incremental settings for materials 1/2-inch to 1-1/2-inch thick and patented three drill guide fixed spacing on the drill guide. A dust collection shroud means no more woodchips, and the clamping recess allows you to use many different styles of clamps to secure your jig to the workbench. For peace of mind, the hardened steel drill guides are backed by a lifetime warranty.

From the Manufacturer

The Kreg Jig Master System is the ultimate pocket-hole jig and a great choice for any woodworking enthusiast. Between its solid clamp, large clamping recess, dust-collection attachment, material support stop, removable 3-hole drill guide, and seemingly endless adjustability, this jig truly has it all! The large clamping recess makes it easy to secure your jig to your workbench using Kreg multi-purpose face clamps or any common bar clamp or c-clamp, and the rear-mounted clamp design is a proven design, offering incredible rigidity and uncompromising workpiece hold-strength. Adjustments are as easy as releasing the lock-nut, and rotating to the correct setting. Thanks to the innovative removable drill guide, the Kreg Jig Master can be many tools at once. First, a sturdy bench top jig utilizing the bench top base for high-speed production pocket-holes, then a contractor-grade jig for work on the road through the use of the portable base, and also a high quality repair jig with the addition of spacer blocks to the bottom of the drill guide. The patented 3-hole drill guide lets you make perfectly placed pocket-holes in a wide variety of material widths and thicknesses (from 1/2-Inch to 1-1/2-Inch, in 1/8-Inch increments). Every Kreg drill guide features a hardened steel core which carries a full lifetime guarantee. The core shrouds the bit and supports the workpiece through 100% of the drill-stroke, resulting in minimal bit deflection, reduced tear-out, and a clean pluggable pocket-hole.

• Glass filled nylon
• Imported
• Removable Drill Guide for use with benchtop and portable bases
• Patented 3-hole drill guide allows you to make perfectly placed Pocket-Holes in a wide variety of material widths and thicknesses
• 1/8-Inch incremental settings for materials from 1/2-Inch to 1-1/2-Inch thick
• Dust Collection Shroud - Say goodbye to woodchips. The case is not included.
• Large clamping recess allows you to use many different styles of clamps to secure your jig to the workbench
• Kit contains: Kreg Jig K4, Stepped Drill bit and stop collar, 6" square-drive bit, Starter screw set and plug set, Face clamp, Portable base, Material support stop, Dust collection attachement

User questions & answers

Question:	Does this work on particle board
Answer:	For boards it will work well. If you are cutting sheet goods I would still recommend a cross cut sled, all depending on width and length of course. I isn't designed to hold board tight but its more of a stop for many cuts the same size. There is a little play in the stop, so it is not perfect, but it is workable.
Question:	Doing small - medium sized DIY projects, what is the best jig for me? This one, the Kreg R3 Jr. or
Answer:	It will work with any saw that has a 3/4*3/8" miter slot
Question:	NEVER MIND ** I can't find a way to remove the question, but if anyone else is curious I did some digging around on the Kreg site last night and came across a video of the "micro", basically yes this larger set can do a 1/2" however the micro produces smaller holes which is preferred with thinner stock. I hated spen
Answer:	The kit I purchased had the jig,a bit, two drawer box supports, two clamps , and handle /knob drilling guide. As I do custom install and have to modify in the field the entire kit has been helpful and accurate all while being easy to adjust and set up on the job . Would recommend highly!
Question:	What does this include that the regular kit ($99) does not include? Are those items essential or useful? Trying to decide which kit to get. Thanks
Answer:	Yes. I am a beginner, and was seeking a user friendly joining method. Kreg pocket-hole Jig is a handy tool. Practice a couple of holes on scrap wood to perfect your spacing and usage.

Product features

Kreg Jig K4 Master System

The Do-It-Yourself Kreg Jig with Bonus Accessories:

The Do-It-Yourself Kreg Jig with Bonus Accessories

The Kreg Jig K4 Master System is a great choice for any woodworking enthusiast looking for a complete set to get started building with Kreg Joinery. With its solid clamp, large clamping recess, dust collection attachment, material support stop, and removable three-hole drill guide, this jig truly has it all. The Master System includes a Kreg Jig K4, Bonus Kreg Accessories: the Kreg Face Clamp, Portable Base, and more.

Sturdy Toggle-Clamp

The Kreg Jig K4's rear-mounted clamp design has been around since the first Kreg Jig. It's a proven design, offering incredible rigidity and uncompromising workpiece hold-strength. Adjustments are as easy as releasing the locknut, and rotating to the correct setting.

Three-Hole Drill Guide

The 3-hole Drill Guide lets you drill pocket holes in a wide variety of material widths and thicknesses—from 1/2 to 11/2 inch in 1/8 inch increments. Every Kreg Drill Guide features a hardened-steel core, which carries a lifetime guarantee. The core shrouds the bit and supports the workpiece through 100% of the drill-stroke, resulting in minimal bit deflection, reduced tear-out, and a clean, pluggable pocket hole.

Dust Collection

Superior Dust Collection to keep your shop/garage looking new

Product description

Kreg SK03 Pocket-Hole Screw Kit in 5 Sizes

From the Manufacturer

This kit contains five of our most popular self-tapping screw sizes for Pocket-Screw Joinery, in a durable easy-to-carry case. All Kreg screws feature a deep #2 square drive, a needle-point self tapping tip, and a case hardened design built for strength.

• Contains 675 of 5 most used screws
• Includes self-tapping screw sizes for pocket-screw joinery
• All Kreg screws feature a deep No. 2 square drive
• Includes a durable easy-to-carry case
• Includes a a needlepoint self-tapping tip

User questions & answers

Question:	I noticed that some one mentioned an app that will tell what type of pocket screw to use with what ever thickness and type of wood what is its name
Answer:	I have not heard about an app, but Kreg Tools has a template that does this. Current price is 9.99 at Kreg.com. Inside on the top lid of the pocket hole screw kit is a quick reference guide also. Just a note, I find it works best for me to round down the wood size.
Question:	Must I use Kreg screw? Can I use other type of screw 'non kreg' type
Answer:	I have used Kreg screws for other non-pocket hole projects as well I love them so much. The screws are very durable - I have unscrewed and screwed in the same screws with no evidence of wear and the square drive heads I've never stripped. They're also, in my opinion, pretty nicely-priced - I accidentally bought two types of wrong-length screws for my first pocket hole project but I've later used those for other things! Very high quality self-drilling screws!
Question:	Do you set the depth guide to the drilling board, or the receiving board? They may differ in thickness. Thanks
Answer:	STEP ONE: Measure the width of your work piece.The first step in using your Kreg pocket hole jig is to measure the thickness of the material you will be drilling into. You will use that measurement for the next two steps. For our example we will use a measurement of 3/4 inch.Your pocket jig includes drill, collar and allen wrench.STEP TWO: Set up your drill bit.The drill bit that came with your Kreg pocket hole jig has two pieces: the drill bit and the stop "collar" which slips onto the smooth part of the drill bit.Your pocket jig also came with an allen wrench that fits into the hole on the side of the collar. Use your allen wrench to loosen the collar by turning it to the left. As soon as you can move the collar up and down the drill bit, stop turning.Look at your drill bit. The very tip of your bit will drill a short, narrow hole. The wider, longer section in the middle of the bit will drill a bigger hole. That bigger hole is the "pocket" that will hide the pocket holes screw.Find the mark that's right for your plan.Your pocket jig has scale markings from 1/2 inch to 1 1/2 inch molded right into the base to make setting up the drill bit very easy.Lay your drill bit in the slot of your pocket jig. Line the very first part of of the wider section of your drill bit with the 3/4 inch marking.While holding your bit in place, slide the collar toward the tip of the drill bit until it is stopped by the front end of the pocket jig. Make sure the hole in the collar is visible.Still holding the bit in place, use your allen wrench to tighten the collar in place by turning the allen wrench to the right.Once your collar is tight, double-check that your drill bit is still lined up at the 3/4 inch mark.Your drill bit is now ready to drill the right depth required by your plan!Insert the drill bit into your drill and tighten it securely.The Kreg pocket hole jig has adjustments for drill angle.STEP THREE: Set up the drill guide on your pocket jig.We will use the same 3/4 inch measurement from Step One. Loosen the brass nut near the top of your Kreg pocket hole jig, so that you can move the drill guide up and down.Find the 3/4 inch mark on the side of the drill guide, and then tighten the brass nut to hold the drill guide in that position.Your drill guide is now ready to drill your pocket holes at the correct angle.STEP FOUR: Position your piece in your Kreg Pocket Hole Jig.With the adjusted drill bit securely fastened in your drill, put the drill bit into one of the guide holes. Start the drill. When it reaches full speed, slowly lower it into the wood.To keep wood chips and sawdust from accumulating in the guide hole, bring the drill bit partway up several times as you are drilling each hole.Your Kreg Pocket Hole Jig makes fast work of these holes.Unclamp and move your workpiece so that you can drill the rest of the pocket holes needed on that piece.
Question:	What length and thread do you use mainly for 3/4" plywoods and 3/4" hardwoods
Answer:	1 1/4 length screws, I find that the coarse threads are the best about 90% of the time. Cheers

Product features

Pocket-Hole Screw Kit

Square-drive prevents bit slipping while driving

When you’re building a project, there are few things more aggravating than having your driver bit slip, spin, and strip out the screw head. All too often, that leaves you with a screw you can’t drive the rest of the way in or back out, so you’re stuck. Kreg Screws have a square-drive head that works with a #2 square drive bit to drive screws without the driver slipping. That means you can drive every screw completely, quickly, and with confidence.

Flat-bottom head seats firmly in pocket hole

Ordinary woodworking screws and drywall screws have a head with a conical shape on the underside. The head on a Kreg Screw is perfectly flat on the bottom. That flat shape mates perfectly with the flat pocket in a Kreg pocket hole. So, when you drive a Kreg Screw into the pocket hole, it the force is applied straight toward the screw tip, presses evenly on the pocket, and holds the joint tightly together, without deforming the pocket, which could split the wood.

Smooth shank draws the joint together

The threads on a Kreg Screw stop partway up the screw shank, which leaves a smooth area below the screw head. It’s there for good reason. When you drive the screw in, the threaded portion grabs into the workpiece you’re attaching to, pulling the screw in. The other piece glides freely over the unthreaded part of the screw, allowing that piece to pull tightly against the mating piece — without interference from unnecessary threads.

Self-tapping tip drills its own hole without splitting

When you assemble a joint with Kreg Screws, the pocket hole is all you have to drill. There’s no need for a pilot hole in the mating piece. That’s because Kreg Screws have a self-tapping tip that 'drills' its own hole, so the screw drives in quickly and easily without splitting the wood, like ordinary screws often do. This makes assembly much easier, too, since you don’t have to worry about whether your pilot hole will line up correctly.

Product description

"The home improvers solution for building with wood with the Keg jig R3, you can build bookcases, shelves, and storage projects for your home. It's also great for creating custom built-ins, and countless other home improvement projects. Plus, the Keg jig R3 can be used portable to make lasting repairs around your home. clamp pad adapter the Keg jig R3 includes a clamp pad adapter, which allows the R3 to be easily secured to your work piece using any standard bar clamp, C-Clamp, or Keg face clamp. For faster and more repeatable pocket holes, choose a Keg face clamp. Organized carrying case compact yet durable carrying case is included so that you'll always have a safe place to store your Keg jig R3 and organize all of the accessories It comes with. As a bonus, a depth-collar gauge has been molded into the case for handy reference. Hardened-steel corker drill guides are subject to direct contact with the drill bit every time A pocket hole is created. The core of every Keg jig R3 features hardened-steel, which carries a lifetime . The Keg jig r3’s core shrouds the bit and supports the work piece through 100% of the drill-stroke. The end result is minimal bit deflection, reduced tear-out, and a clean, pluggable pocket hole fit for finish work. "

• The Kreg Jig Jr(R3) is an amazing repair jig and an exceptionally handy addition to any tool collection
• Easy to use and install
• Whether you're crawling under a table to make a quick repair or taking Kreg Joinery on the road
• Pocket hole jig system for do-it-yourselfers
• Easy to adjust for materials 1/2-Inch to 1-1/2-Inch
• Solid metal drill guide
• Includes drill and drive bits, depth collar with hex key, 5 sizes of pocket hole screws, clamp pad adapter, case

User questions & answers

Question:	how many screws
Answer:	Mine came with just a few sample screws but I have an assortment of a couple thousand screws so it was no matter. I make furniture in a home shop so I mostly use construction screws and furniture grade FH screws in #6, #8; in 1&1/4, 1&5/8, and 2&1/2 inches.
Question:	What is the primary difference between the R3, R4, & R5 units and which would be better for an advanced cabinet maker
Answer:	If you build cabinets, furniture or any think to do with joining wood the one I would recommend is the K4 or K5. The K5 is the newer version which incorporates some innovative additions. The other jigs in the system are more portable, but a lot slower to use. The K4 is perfectly adequate for my shop. Buying the kit and the "briefcase" of screws will get you up and rolling fast. The video is very enlightening. Good luck. The R3 Jr. is fine for casual use and some specialty uses as explained in the offering but if you do a lot of woodworking with Kreg the K4 & 5 are more accurate and repeatable.
Question:	Do you have to use their screws with this tool or can you use regular wood screws you buy at any hardware store
Answer:	I vehemently dislike the Kreg style pock hole screw (which are "modified truss" head screws) for the simple reason that I dislike square drive screws. There are other manufacturers which offer pocket hole style screws but with a No. 7 or 8 torx drive (T15 size). These are much more user friendly than square drive screws which require the drill driver to be perfect aligned with the screw otherwise the square becomes rounded out. The torx drive screws allow for some wiggle room with the alignment won't damage the screw head.
Question:	If this is more expensive than the R3 and clamp separately and the clamp is smaller why get this kit
Answer:	Because with this kit you become irresistable to women, your beard becomes the envy of lumberjacks and your dog can jump 4 feet high on two legs. Who would not want all of that?

Product features

Kreg Jig R3

The Home Improver's Solution

The Kreg Jig R3 is a great way to get started building with Kreg Joinery. It's a good choice if you build a few projects each year, or if most of your projects are smaller in scale. Plus, the R3 is handy to have on hand for making repairs around the home.

Clamp Pad Adapter

The Kreg Jig R3 includes a Clamp Pad Adapter, which allows the R3 to be easily secured to your workpiece using any standard bar clamp, C-clamp, or Kreg Face Clamp. For faster and more repeatable pocket holes, choose a Kreg Face Clamp.

Material Thickness Setting

From thin drawer boxes and craft projects to stout 2x4s, this Kreg Jig R3 can handle just about anything. Independent positioning sliders feature nine depth settings, allowing you to easily join materials from 1/2 inches to 1 1/2 inches thick in 1/8 inches increments.

Secure the R3 in Tight Spots

In certain, restrictive situations where the use of a clamp is not possible, the Kreg Jig R3 can be secured in place with a common wood screw. All you have to do is drive the screw through the mounting hole on the top of the jig. This application is demonstrated in the photo.

Fix Broken Wood Joints Fast

A Kreg Jig is the perfect tool for repairing broken drawers, beat up bookcases, wobbly chairs, fractured frames, and so much more—without messy glue or nails. You’ll be amazed how easy it is to fix what you have—instead of having to replace it—using the Kreg Joinery System.

Organized Carrying Case

A compact yet durable carrying case is included so that you'll always have a safe place to store your Kreg Jig R3 and organize all of the accessories it comes with. As a bonus, a depth-collar gauge has been molded into the case for handy reference.

Glass-Reinforced Nylon

The blue body of every Kreg Jig is made from a heavy-duty, glass-reinforced nylon. This composite material offers the resiliency and flexibility you need without sacrificing the strength and durability Kreg customers have come to expect.

Superior Angle

Unlike competing jigs with a shallower angle of approach, the Kreg Jig R3 features an optimized drilling angle specifically designed to increase driving efficiency and minimize the overall size of the pocket hole. The result is a compact pocket hole, less than 1 1/2 inches in size.

Wood Chip Relief

The Kreg Jig R3 includes one wood chip relief hole for every drill guide hole, designed to keep the drill bit clear of excess wood chips, minimizing drill-torque, increasing the longevity of your drill bits, and allowing you to complete a perfect pocket hole in just one plunge.

Hardened-Steel Core

The core of every Kreg Jig features hardened-steel, which carries a lifetime guarantee. The R3’s core shrouds the bit and supports the workpiece through 100% of the drill-stroke for minimal bit deflection, reduced tear-out, and a clean, pluggable pocket hole.

Product description

Three easy-to-use Jigs plus 2 bonus Clamps in one specially-priced kit. With this hardware installation kit you can install knobs and pulls, concealed hinges, and drawer slides with accurate, repeatable results.

Concealed Hinge Jig-KHI-HINGE

The Concealed Hinge Jig takes the guesswork out of installing cabinet doors using concealed hinges. This economical, easy-to-use jig ensures accurate hinge alignment, so you can install doors that fit great and work well. Plus, the Concealed Hinge Jig works with an ordinary drill and the included carbide tipped bit. The Concealed Hinge Jig allows you to drill cup holes for concealed cabinet door hinges using just a drill. The jig positions an included carbide-tipped bit exactly at the proper position and offset, and drills to the perfect depth every time thanks to a depth stop collar.

Cabinet Hardware Jig-KHI-PULL

The Kreg Cabinet Hardware Jig takes the guesswork out of installing cabinet knobs and pulls. The movable edge guide and measuring scales make it easy to position knobs precisely, while adjustable drill guides ensure straight holes for perfect knob and pull positioning every time.

Drawer Slide Jig-KHI-SLIDE

The Drawer Slide Jig takes the guesswork out of installing drawer slides. This easy-to use jig holds slides in position as you drill mounting holes in the cabinet, and it supports drawer boxes while mounting slides to the drawer. Plus, the Jig works with ball-bearing, epoxy-coated, and under-mount slides for perfect positioning every time.

Classic 2-Inch Face Clamp-KHC-MICRO X2

Classic 2-Inch Face Clamps are designed for creating perfectly flush Kreg Joints, and they work great for lots of other shop and project tasks that require solid clamping without marring. These clamps feature large clamp pads that distribute clamping force evenly and hold pieces flush during assembly.

• HARDWARE INSTALLATION KIT: Three easy-to-use Jigs plus two bonus Clamps in one specially-priced kit. With this hardware installation kit you can install knobs and pulls, concealed hinges, and drawer slides with accurate, repeatable results
• CONCEALED HINGE JIG: The Concealed Hinge Jig takes the guesswork out of installing cabinet doors using concealed hinges
• CABINET HARDWARE JIG: The Kreg Cabinet Hardware Jig takes the guesswork out of installing cabinet knobs and pulls`
• DRAWER SLIDE JIG: The Drawer Slide Jig takes the guesswork out of installing drawer slides
• CLASSIC 2-INCH FACE CLAMP: Classic 2-Inch Face Clamps are designed for creating perfectly flush Kreg Joints, and they work great for lots of other shop and project tasks that require solid clamping without marring

User questions & answers

Question:	Does the concealed hinge jig come with the bit
Answer:	Yes. The model I purchased has one side of the rule marked 0-6 and 6-12 inches, in 1/16ths of an inch. The other side is 0-15+ and 15-30+ in centimeters.