9 best dust collector controls

Product description

We see a future built on great brands, great products and great people. In every facet of our business we leverage the strengths of our global infrastructure to maximize the benefits of all three.

• The future built on great brands
• JPW is committed to providing unmatched service at every step of every business relationship
• U. S. based technical service for all of our brands
• Stock more than 40, 000 replacement parts
• Built to serve the needs of our customers

User questions & answers

Question:	Can i get a 2nd remote
Answer:	I believe you can get another remote.
Question:	Can i use this remot on a 5hp
Answer:	I don’t see why not. It only has one requirement 220VAC. It’s not a motor starter. Think of it as an on off switch interrupting the circuit.
Question:	how long is the cord
Answer:	I haven’t measured but think 10-12 feet
Question:	I returned the Long Ranger because it worked intermittently and tripped by 220 breaker. Is this product more reliable
Answer:	I can’t speak to the reliability versus something else as this is the only one I’ve ordered. Had it for about two weeks now and have had zero issues. I’m using it on my 2HP jet DC 230V unit.

Product description

We see a future built on great brands, great products and great people. In every facet of our business we leverage the strengths of our global infrastructure to maximize the benefits of all three.

• The future built on great brands
• JPW is committed to providing unmatched service at every step of every business relationship
• U. S. based technical service for all of our brands
• Stock more than 40, 000 replacement parts
• Built to serve the needs of our customers

User questions & answers

Question:	what size dust collector are you using? I want this for the 1.5 HP Delta
Answer:	I'm using this on the Jet DC 1100 VX which is a 1.5 HP collector and it has performed very well.
Question:	Does the remote go through walls
Answer:	A 2 X 6" wall would indicate that it is an outside wall which could have foil backed insulation. If it is foil backed, the foil will most likely block the radio waves. If the wall has a 120 electric outlet plug: remove the face plate and look for foil showing at edge of electric box. You could also mount the Remote Control in the tool room and then run the dust collector power cord through the wall to the Remote Control Unit located in tool room.
Question:	Will this work with a 2 hp dust collector
Answer:	If it 115 volt plug in 2hp then it should work. Check your spec.s first. It works well but does seem at times to be line of sight in order to turn on and off. If you have big equipment between you and the box it might not work. I am happy with it and would buy again
Question:	Could i use something like a $23 kasa smart plug instead? what does this do better
Answer:	I doubt that any of the smart plugs currently available, especially at that price, would be able to withstand the inrush current that a 1.5HP motor causes. My Delta 50-850 Dust Collector has a 1.5HP motor and even the JET remote that is rated for a 1.5HP motor failed on the first start. Maybe there are 1.5HP motors on some other branded dust collectors that have a lower inrush current but i haven't been able to determine what would actually work.

• INCLUDED REMOTE CONTROL: This updated dust collector has a 15m remote control so that you can control your dust collector more conveniently and improve your work efficiency
• POWERFUL MOTOR: The dust collector is equipped with a 1HP powerful induction motor with 6.5AMP 550CFM airflow, the steel impeller supply 550 CFM airflow, the hose is 4inch x 80inch
• TWO WAYS TO USE: Our dust collector can be mounted on the wall and it has wheels with a brake for easy movement and fix position
• BETTER WITH 2 MICRON DUST BAG: To ensure a better experience, we suggest matching with our 2-micron filter bag when you use this dust collector
• WIDELY APPLICATION: This wall-mounted dust collector is very versatile, using it with a 13 gal capacity dust bag the dust collector works with 4 in hoses to pick up large chips from jointers, saws, sanders, and planers

User questions & answers

Question:	What is the diameter of the hose
Answer:	Get a full size for a twin
Question:	Can i use it as a jewelry dust collector
Answer:	Hi Dear.DW means Double layers with white sherpa.DG means Double layers with grey sherpa.

Product features

About BUCKTOOL Wall-mounted Dust Collector with Remote Control and Dust Bag

BUCKTOOL wall-mounted Dust Collector is designed to capture dust right at the source. The portable dust collector produces more suction than ordinary shop vacuums. With a 13 gal. capacity dust bag the dust collector works with 4 in. hoses to pick up large chips from jointers, saws, sanders, and planers. A simple wall-mounted bracket and locking screw system also ensure you'll be safely up and running in no time!

This updated dust collector has a remote control so that you can control your dust collector more conveniently and improve your work efficiency. This wall-mounted dust collector with 550 CFM capacity makes it very versatile, it will handle about any hungry woodworking machine, and the collect dust next to the dust production with minimal ducting keeps the static pressure loss at a minimum status

Product Information

Motor size: 1 HP 120V single-phase

Air suction capacity: 550 CFM

Impeller speed: 3450 RPM

Amps: 6.5 Amp

Intake hole diameter: 4-Inch

Bag size: 3.1 CU.FT

Impeller: Balanced steel radial fin（9 inch）

Maximum static pressure: 1440Pa（5.8inH2O）

Remote Control

15m remote control so that you can control your dust collector more conveniently.

Safety Cap

Prevent your hand from touching the fan blade.

High Quality 4” Hose , 80” Long

High quality 4” hose can fit most of the woodworking machine.

Wall-mount Design

The dust collector can be mounted on the wall by using the wall mount kits, easy for use and save your valuable space.

Product description

Stay safe in your workshop with this General International 10-1000 M1 Smart Air Filtration System. This filter system is suitable for industrial and residential use, ensuring your workspace is free of dust, pollen, mold, and more. With the SMART technology, the laser sensor continually scans the air for dust, dirt, smoke, and other particulates. When it senses those particulates, the air purifier turns itself on to automatically clean the air. Use the 3-option airflow for customized speed and in manual mode, you can control the timer between 1 to 12 hours with the convenient remote control. The 2-filter system with air diffuser disperses outgoing air into a broader pattern while the disposable electrostatic outer filter attracts more dust particles than standard filters. The inner pocket filter is removable for easy cleaning and the easy-grip handles allow easy portability of the unit. For long, dependable service, this air purifier is designed with a fully-enclosed ball bearing motor with overload protection. Mount on the ceiling with the 4 eye bolts or set on your workbench for versatile placement. This General International 10-1000 M1 Smart Air Filtration System filters out pesky particulates so you can breathe easy while you work.

• CONTINUOUS SCANNING: Air filtration system is designed with an automated laser sensor for continuous particle scanning, main control board, portable size, and easy installation
• FEATURES: LED lighting system with 2 bottom lights for added visibility, 3 speeds to choose from including 1089, 756, and 580 CFM, and dual filter system for ultimate air dispersion and particulate filtration
• INCLUDES: Remote control with a 12-hour timer for user convenience, 4 eye bolts for ceiling mount, and rubberized feet for non-slip workbench placement
• OVERLOAD PROTECTION: Fully-enclosed ball-bearing motor provides overload protection for long, dependable service
• DURABLE AND PORTABLE: Constructed of steel, cast-iron, and aluminum with a powder-coated finish for long-lasting durability and easy-grip handles allow for portability

Product description

i-Socket Autoswitch Workshop Dust Control Switch Black 1 pk

• ESSENTIAL: Auto on off & means less dust! i-Socket supports OSHA compliance, a safety and convenience must-have in the workshop or indoor jobsite.
• EFFICIENT: Saves time, minimizes hazardous airborne dust, reduces cleanup and noise so you can focus on your work.
• INTUITIVE: Using i-Socket is an easy 3 step process. With Workshop you just plug-in and get to work.
• NEW UPDATED DESIGN: i-Socket Workshop features two accessory outlets, a durable enclosed casing, Mode switch and LED safety indicators.
• FLEXIBILITY The Mode switch allows the Workshop to function in Auto and Manual Mode for when you want to control use of the vacuum and accessory.

User questions & answers

Question:	When im using this with my bosch glide miter saw and harbor freight dust collector, its taking 2 to 3 seconds to get full power on the saw. Remedy
Answer:	According to tag, designed in USA and made in China.
Question:	Will this handle a harbor freight dust collector, its their 2hp unit and my Delta 36-725 table saw, thanks
Answer:	I have washed this blanket many times and have not noticed fur clumps. Still looks like new.
Question:	Can I daisy chain multiple tools? I would only be using one tool at a time
Answer:	Dear.Thanks for your question.Currently more products just on the way.Due to rush season coming all relevant logistics might postpone caused by port congestion.We would like to suggest you could add our product on your wishlist.Really appreciate!
Question:	will this product work with a 6.5 peak hp shop vac
Answer:	Dear Customer, Small sizes just on the way might launch soon,you could add it on your wishlist and check in couple of days later.We appreciate it.

Product description

Are you ready to get more from your dust collector? The Cyclone Dust Collector Collection from JET® delivers the efficiency you’ve been waiting for. With a direct-mount filter, a radio frequency remote control, and a large collection bin, these dust collectors take your shop’s capabilities to a new level. Upgrade to a JET® Cyclone Dust Collector and experience The Power of Efficiency.

• CONSTANT SUCTION: Heavy debris is pulled down to collection drum before debris stream reaches the filter.
• QUICK-RELEASE COLLECTION DRUM: Heavy debris is captured in a 20-gallon drum.
• REMOTE CONTROL: Included radio frequency remote control works from up to 50 feet away.
• DOUBLE-PADDLE MANUAL CLEANING SYSTEM: Quickly cleans the pleated filter.
• CANISTER FILTER CAPTURES 99% OF 2-MICRON PARTICLES

User questions & answers

Question:	Can this be used as a stationary unit using 4" pipe and blast gates at all tools
Answer:	It gets wicked into the material and does not go through to the other side. I still clean it with my Bissel little green machine and then wash the blanket after a couple of accidents. Really a great blanket and I recommend it.
Question:	Does it have a 1 phase or 3 phase motor
Answer:	I went and looked on mine and that's pretty strange the washing instruction tag has no instructions and instead has a website address. I had trouble finding the instructions there too but finally found this - 1. Insert laundry detergent. 2.Wash on Regular Cycle, (warm water) (no bleach) 3.Dry on Medium Heat !00% Polyester should be good at any temp to wash but dry low or medium (my thoughts)
Question:	What is the actual foot print of the unit. I have seen three different dimensions listed for this unit
Answer:	Large. I purchased one for my Rottweiler and it is perfect.
Question:	What is the CFM rating for this dust collector
Answer:	Cats can swallow ribbons, yarn, rubber bands, and string causing intestinal issues. I wouldn’t allow mine to play with it, even if the material was safe.

Product features

JCDC-1.5 Cyclone Dust Collector, 1.5HP, 115V

Are you ready to get more from your dust collector? The Cyclone Dust Collector Collection from JET delivers the efficiency you’ve been waiting for. With a direct mount filter, a radio frequency remote control and a large collection bin these dust collectors take your shop’s capabilities to a new level. Upgrade to a JET Cyclone Dust Collector and experience the Power of Efficiency.

Collection Drum

Heavy debris is captured in 20 gallon drum with quick release levers and independent casters for quick emptying.

Debris Collection

Heavy debris is pulled down to collection drum before debris stream reaches the filter, providing constant suction.

Swivel Casters

Swivel casters make it easy to move the unit around the shop.

• Delivers up to 600 Actual CFM through 5” inlet - ample airflow for any woodworking tool with a 4”-6” port, including planers, jointers, lathes, drum sanders, etc. Designed for direct connection to tools with flex hose.
• Powerful, portable, and awarded "Best Tool" by Fine Woodworking Magazine, the Mini-Gorilla Cyclone Dust Collector is the tool of choice for small shops looking for a mobile solution that never compromises on air performance or filtration.
• Lightweight and portable design with small footprint, lockable non-marking wheels, and 22-gallon mobile dust bin with liner bag holder and fill level viewing window. Ideal for smaller workshops with limited space. Low pitch (80.5 dBA at 10 ft) noise level for operator comfort.
• HEPA-certified filtration (99.97% efficiency at 0.3 microns) with high-efficiency (>99%) cyclonic pre-separation that significantly reduces the need for filter cleaning and maintenance. HEPA filter features non-stick membrane and vacuum hose port for easy cleaning.
• Patented and made in the USA with industrial grade 1.5 HP US-made fan blower motor that’s built to last a lifetime. US Pat. 7824457, D604464, 8491686, 8377160, 8496719, 7937803

User questions & answers

Question:	Does this still ship with a Baldor motor
Answer:	I got the large (50X60) and my girl’s just slightly smaller than a lab at around 50 pounds. I just think the large gives them more room to roll around and wrap up in the blanket.
Question:	Curious why the item is so much more expensive here than on your website. I have a gift card for a dust collector but not for $200 mark up
Answer:	Hi, Both sides of the Pawtect™ Blanket incorporate WickQuick® technology to wick the moisture away from the surface and draw it into the blankets. We use a proprietary impermeable layer to prevent any liquid from seeping from one side to another side of the blanket or onto an unwanted surface.

Product features

Mini-Gorilla Portable Cyclone Dust Collector

The Mini-Gorilla Cyclone Dust Collector is one of Oneida Air Systems' best designed products to date! Designed specifically for smaller workshops where the collector is moved from tool to tool, our Mini-Gorilla combines the quality and performance of a commercial system with the features and convenience of personal home units. Built to last a lifetime using industrial-grade materials, this portable system comes packed with new innovative features that have already earned it recognition as one of the best portable units on the market.

Recommended for tools with 4" to 6" dust collection ports, including lathes, jointers, shapers, planers, table saws, router tables, disc sanders, drum sanders, belt sanders, and more.

Continuously High Airflow Performance

Your dust collector should perform at peak efficiency at all times to ensure the health, safety, and quality of your work. That's why Oneida Air uses only the highest quality motors with our dust collection systems. Far superior to the cheap, foreign imported motors used by other manufacturers, our industrial-grade motors are built to last a lifetime.

• High-efficiency U.S. motor custom-tooled for Oneida Air Systems
• Delivers up to 600 Actual CFM - ample airflow for any woodworking tool
• Industrial-grade brushless motor designed for continuous duty
• Low pitch noise level provides ideal operator comfort

Streamlined Integrated Cyclone Separator

One of the four tenets of good dust collection is using a cyclone to remove waste from the incoming air. Once you've seen the benefits of cyclonic separation, there's no turning back!

• Separates up to 99% of bulk debris and fine dusts from the airstream, containing it safely in the dust bin
• Significantly extends the lifespan of the filter and reduces time needed for filter cleaning
• Uniquely tall cyclone design maximizes particle separation performance
• Neutral-vane inlet and integrated air ramp minimizes inbound air turbulence
• Ideal for direct flex hose connections to tools

High Quality & Serviceable Filtration

This system uses HEPA cartridge filters specifically designed for dust collection applications - providing unbeatable airflow and filtration performance.

• HEPA filter media rated as 99.97% efficient at 0.3 microns
• Requires zero pre-loading; works at peak efficiency right out of the box and after every cleaning
• Wide-spaced pleating and non-stick PTFE membrane coating for quick and easy maintenance
• Vacuum hose port lets you clean fine dusts released from the filter without disassembling the system
• Durable fiber construction and wire cage reinforcement maximizes longevity
• Equipped with patented Flame Guard arrestor

Lightweight, Compact, and Highly Mobile Design

We've optimized this system for smaller workspaces so the dust collector can be moved from tool to tool. And we've molded the cyclone, fan housing, filter plenum, and the drum from an industrial static dissipative resin.

• 30% lighter than the nearest competitor system - only 85 lbs.
• Small footprint and low height saves valuable space within the shop
• Mobile tripod stand provides maximum stability and easy access for movement
• Large 3" locking casters roll easily over obstacles and won't scuff your floors

Easy-to-Handle Large Capacity Dust Container

The waste container of the Mini-Gorilla is a highly reinforced, lightweight, 22-gallon drum with non-marking casters. Easy to detach and empty, the Mini-Gorilla's drop-down dust bin lets you work with maximum efficiency.

• Large 22-gallon capacity provides enough storage for hours of work
• Dust level viewing window lets you see the drum's fill level
• Three quick-release latches lift the drum off the ground while system is in use for higher mobility
• Bag gripper system lets you put disposal liner bags within the bin for quick and easy waste disposal
• Features three swiveling caster wheels and easy-carry handles for dumping

Product description

Includes: Receiver, Hand Control, 9V Battery. Input Voltage 110-125 Volts AC; Maximum 16 AMPS; Maximum Horsepower 1. 5HP. 50 foot range; 5 foot cord on receiver module; Requires 9V battery (included). FCC approved; RF signal goes through walls with no outside interference: Unlimited programmable frequencies; Extra Hand Controls available (LRTM-3). Save yourself the inconvenience of walking over to turn on your dust collector while you're in the middle of a critical project; Simply press the transmitter on/off button to easily switch your dust collector on or off.

From the Manufacturer

Turn on a dust collector from anywhere in the shop with the remote dust collector switch. Grounded with reset button, uses R.F. signal, which is not affected by outside interference by large television transformers, electrical noise, or three-phase power sources. 110 volts, 1-1/2 HP 20 amp relay receiver.

• Save yourself the inconvenience of walking over to turn on your dust Collector while you're in the middle of a critical project; simply press the transmitter on/off button to easily switch your dust Collector on or off
• Includes: receiver, hand control, 9V battery
• Input Voltage 110-125 volts AC; maximum 16 amps; maximum horsepower 1. 5HP
• 50 foot range; 5 foot cord on receiver module; requires 9V battery (included)
• FCC approved; RF signal goes through walls with no outside interference: Unlimited programmable frequencies; Extra Hand Controls available (LRTM-3)

User questions & answers

Question:	Any chance there is a two plug version that are each controlled by a different button? I have a vac and compressor I want to control seperately
Answer:	Yes
Question:	Can I use this switch to control the power to a 1 1/2 horse power 20 amp pressure washer
Answer:	Had it installed about 6 months, with NO issues. Works great
Question:	Will this work with my 3.7-HP 60-Gallon 220v compressor
Answer:	I installed this on my 2012 Ram 2500 6.7L w/tip star and no issues. It properly delays for the diesel glow plugs. According to https://www.flashlogic.com/ it will fit your 2014 as well. Don't forget your programming cable!!
Question:	The description is not clear, is the transmitter included in the 61.10 price, or does that need to be purchased additionally
Answer:	You can do it on mac if you have internet explorer.

Product features

PSI Woodworking LR110-3 Long Ranger III Remote Dust Collector Starter Switch

Makes your life easier!

The PSI Dust Collector Starter Switch lets gives you the time and freedom to focus on other chores while it takes care of the operation of the Dust Collector. You do not have be around, constantly looking at the Dust Collector to switch it off or on. All you need to do is press the button on the transmitter to control it and that’s it, your job is done, just like that! As it works perfectly fine with multiple frequency codes, multiple operations can take place from different frequencies. To ensure this, the extra hand pieces can be used for multiple machines.

Heavy Duty Construction

The PSI Woodworking Starter Switch has a heavy duty commercial grade construction that makes it extremely durable. It comes with a 5ft cord that ensures a long range connection of upto 50ft where the transmission doesn’t have to be necessarily aimed directly, the signal passes through the wall as well. For seamless transmission, the switch uses R.F signal hence it is not affected by any interference.

Product description

Retaining the proven reliability of our Etoolcity technology, the automatic dust controller switch is the latest Version of the Etoolcity Vacuum Autoswitch-an essential device in workshops and on job sites for more than a decade.



THE NEW ETOOLCITY AUTOSWITCH FEATURES

★New Current Sensing Technology and Actuation Threshold

★Supports a Wide Range of Cutting Tools from Rotary Handheld Devices to Large Shop Saws

★Prevents Circuit Overload with an Auto Turn-On Vacuum Delay

★Runs the Vacuum Only While You’re Using Your Tool So You Save Time and Electricity

★Automatically Delays Vacuum Turn-Off by 7 Seconds to Continue to Clear the Air While the Motor Spins Down

★Helps to Comply with OSHA Requirements for Dust Control



Highlights of the Etoolcity Autoswitch:

▲STARTUP DELAY.Controls in-rush current to help avoid circuit overload

▲AUTO MODE.Turns the vacuum on automatically with the power tool

▲SHUTOFF DELAY.Allows time for the vacuum to clear the hose of debris



Focus On Your Work:

★Save time

★Minimize airborne dust Reduce

★Cleanup



Product guarantee: Full money back guarantee without reason, 2-year warranty and 24-hour support for customer service.



3 easy steps to install:

1: Plug the switch into wall

2: Plug vacuum into 'B' port outlet and switch on the vacuum

3: Plug tool into 'A' port outlet and use your tool as normal



ELECTRICAL SPECIFICATIONS Outlet Required:

1.Standard 120V/15A or 220V/10A,50/60Hz Outlet

2.Input Connection: 3prong(grounded)male

3.'A' Port Power Rating: 120V/15A or 220V/10A,50/60Hz

4.'B' Port Power Rating: 120V/15A or 220V/10A,50/60Hz

5.Actuation Threshold: ~0.25 Amps(about 30W at 120V)



Package Included:

●1x Automatic vacuum switch with 15'' power cord

●2x Mounting screws

●1x Installation instruction

●1x Strong nano-markless hook sticker

• Unique Current Sensing Technology. If the tool motor connected to the 'A' port exceeds 30W, the vacuum connected to the 'B' port will automatically delay 1s to turn on, which helps prevent circuit overloaded by large current if tool and vacuum power-on at the same time
• Make the Work More Effective. Automatic delays 1s to turn on the vacuum when you start your tool, and delays 7s to turn off the vacuum to clean the inlet tube when you complete your work. Saving time and electricity, reducing airborne toxin and work area noise that can lead many health problems
• Suitable for Most Medium Duty Workloads. Etoolcity automatic vacuum switch has a starting threshold of approximately 0.25 amps(30watts at 120V and 60watts at 220V), perfectly suited for medium-sized work loads such as most Miter Saws, Table Saws, Power Sanders and Routers, and extend the life of your vacuum
• More Safety. Adopting high-cost, UL-certified American Standard 14AWG power cord which allowable passage with a large current that more than 30A, the Etoolcity Automatic Vacuum Switch can work stably within 3600W. The switch's shell has PC+ABS V0 grade flame retardant material, it is more reliable and safe to protect work
• Two Installation Methods. You can use screws to fix the power module part, or use strong nano-markless hook sticker to attach directly to the wall. Both ways are very strong

User questions & answers

Question:	What is the Warranty period
Answer:	2 Years!
Question:	What do you do when you want to use thr vacumn stanalone to vac the floor
Answer:	You unplug the vacuum and plug it in to a regular outlet. If you want to do this frequently, you might consider one that has a switch, such as https://www.amazon.com/Automated-Vacuum-Switch/dp/B0035YGLZG/ref=cm_wl_huc_item
Question:	Will a palm sander kick the shop vac on? I am using a bosch 5" sander
Answer:	it should be no problem, it works with my 5" sander
Question:	can you plug it into multi outlet and then use for more than tool
Answer:	Hi, dear! You can plug a multi outlet into our vacuum switch 'A' outle, and then use for more than tool! But please note that the total power of our 'A' outlet cannot exceed 1800W.