13 best coil nailer roofings

Product description

The MAX CN445R3 SuperRoofer is a professional grade pneumatic roofing nailer. The applications for the CN445R3 include fastening asphalt and fiberglass shingles, fastening lath wire to plywood, the installation of siding, and wooden box assembly. The CN445R3 is equipped with a swivel plug to alleviate the tangling of the air hose and also features a trigger lock to prevent accidental firing of the tool.

• Tar resistant nose- designed to resist tar 4x longer than conventional tools.
• Full round head driver blade for better holding power.
• Magnet holds the last nail in place to prevent the tool from jamming.
• MAX patented maintenance free end cap filter prevents foreign substances from entering the tool helping internal parts last longer, requiring less maintenance on the tool.
• Dial adjustable depth control allows depth adjustment with no special tool.

User questions & answers

Question:	Does this come with a carrying case
Answer:	No, sorry.
Question:	What is the recommended coiled nail brand to use for no jam-ups
Answer:	Though it’s true, not all coil nails are created the same, as long as they keep there form (don’t get crushed in you pouch or stuff thrown on top of the coil nail box in your truck) you should be more or less fine. The gun you use also makes a difference. I’ve had good success with Max, also bostich. They seem to jam far less and are somewhat easier to unjam than other brands I’ve used, like my dads ridged and porter cable. But remember no gun and no nail brand, even if both Top tier, will be completely jam free.
Question:	What is the difference between this model and the CN445R model
Answer:	MAX SuperRoofer is in its third generation - the latest tool is the MAX CN445R3. The CN445R and CN445R2 are older tools. dh
Question:	Does it work for siding
Answer:	Most siding guns accommodate a 2 1/4” nail. This gun will hold 3/4”-1 3/4” inch nail. Most hardie type siding requires 1 1/2” in stud so it would work for that type of siding. As far as vinyl it will nail flush and not leave the expansion gap required

Product description

No nailer does everything, but the Bostitch RN46-1 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer comes close. Stop at any construction site and watchas the roofers fly through their job with ease. Chances are, they are using the no. 1 roofing nailer in the business--the RN46-1. This little tank is built to last even under extreme job conditions. Bostitch makes sure by dragging it 75-miles across asphalt shingles in its testing labs. Constructed of tough but light magnesium, the RN46-1 weighs only 4.8-pounds and delivers 410-inch-pounds of torque, and it comes with unique features like a single-action side-load canister that is quick and easy to load; a dry-fire lockout so it won't fire when it runs out of nails; carbide inserts wherever it might contact a work surface; skid-resistant pads; a tool-less shingle guide; and an adjustable-depth dial and an over-molded rubber grip.

• 3/4-inch to 1-3/4-inch coil roofing nailer with lockout mechanism prevents firing when empty. Operating Pressure : 70 -120 psi
• Adjustable depth control, full round driver, body and magazine wear guards, side-load canister
• Durable yet lightweight aluminum and carbide tips for long life. Magazine Angle - 15 Degree
• Patented single-action side load canister for fast, one-step nail loading. Adjustable shingle guide for quick shingle spacing
• Backed by seven-year limited warranty

User questions & answers

Question:	Will this coil nailer shoot nails with a 3/8" head
Answer:	Yes, the RN46-1 will shoot roofing nails with a 3/8" head...I think all standard roofing nails have a 3/8" head so any of them from 3/4" to 1 3/4" length should work fine... kd
Question:	can this gun be used to nail hardie siding
Answer:	I wouldn't. This gun can only shoot up to 1 3/4" roofing nails. If it were me, I'd get a siding gun and shoot some longer ring shank nails
Question:	Is this new gun
Answer:	Yes
Question:	Does it come with any type of warranty besides the one that is being offered
Answer:	I would check with the seller you plan to purchase from. It varies, depending on the seller. Some may offer 30-day warranties and others may only pass along manufacturer's warranty information.

Product features

BOSTITCH RN46-1 Coil Roofing Nailer

Lightweight and durable, the Bostitch RN46-1 Coil Roofing Nailer is an ideal tool for roofing, exterior drywall, insulation board, and fiber cement applications. With a patented side-loading canister, zero nail lock-out, easy depth of drive adjustments, and aggressive performance, the RN46-1 is a must-have tool for professional construction workers, builders, roofers, and anyone looking for long-lasting performance from a coil nailer.

Powerful and Accurate Nail Delivery

Amazingly powerful, the RN46-1 is capable of delivering 410 in./lbs. of force at 100 psi. The RN46-1 offers contact trip firing, with the ability to drive up to 100 nails per minute. Contact trip uses a bouncing motion along the workpiece and is great for working on large areas, such as roofs. For shingle work, the RN46-1 features an integrated, tool-less gauge used to control shingle spacing.

Get the Right Depth for the Job

The RN46-1 allows for fast, tool-free depth-of-drive adjustments with its integrated depth dial. The dial has five different settings for finding the perfect driving depth for the job, including flush mount driving, shallow driving, and countersinking.

Product description

High speed valve technology drives over 10 nails per second. High lifetime engine seals and feed system for durability and long life. Depth adjust wheel with numbered detents helps drive nails to the proper depth into a variety of materials. Ergonomic design is lighter (4.5 lbs.) than leading competitive Coil roofing mailers. Steel skid plates with rubber inserts protect the tool and help to stop it from sliding. Operating pressure: 70-120 PSI. Over mold grip. Fixed exhaust.

• High speed valve technology drives over 10 nails per second
• High lifetime engine seals and feed system for durability and long life
• Easy to use

User questions & answers

Question:	Does this nail gun come with a plastic carrying/ storage case
Answer:	Tool only no case
Question:	Is this a new nail gun
Answer:	LOL
Question:	Cual es el mínimo y el maximo de las puntillas que lleva
Answer:	Solo lleva un rollo de clavos para madera por lo regular son de un solo tamaño en rollo...Pero en lo grande entra la medida hasta 1 pulgada 3\4 para esa clavadora y mas chicos
Question:	Can u use this nailer to install a fence
Answer:	No!This gun is recommended for roofing installation. You should try a siding/fencing gun like the Hutachi nv65ah2 or something similar. I actually purchased the freeman version for around $160 and it works pretty good.

• Drives 3/4-Inch to 1-3/4-Inch full head coil roofing nails;
• Adjustable shingle guide for quick shingle spacing;
• Integrated side skid pads prevent the tool from sliding off roof when placed on its side;
• High-capacity magazine holds up to 120 coil nails at a time; Tool free adjustable depth of drive for consistent and controllable nail fit; 360° tool-free air exhaust.
• Interchangeable trigger for single shot or bumper fire function.

User questions & answers

Question:	Does this work with hitachi hot dipped galvanized 16 degree nail coils
Answer:	We used the hitachi nails with ours.
Question:	how big of a compressor do you need
Answer:	A small pancake compressor will work you only need 90 psi
Question:	What comes with the gun
Answer:	safety glasses, hex wrenches, oil bottle, manual
Question:	can you rapid fire with it
Answer:	Idk if u could mess with it to make it rapid shoot, but as It comes u have to hit the trigger everytime u shoot the gun

Product features

Product description

The DEWALT DW45RNR (Certified Refurbished) Coil Roofing Nailer is ideal for asphalt shingle roofing applications. This nailer increases your roofing productivity by allowing you to shoot 120 nails before reloading for maximum efficiency. Coil collated nails are compact and easy to load. Its ergonomic design is lightweight for easy handling.

• High speed valve technology drives at a rate of up to 10 nails per second
• Ergonomic design is lighter than leading competitive coil roofing nailers.
• Robust engine and feed system for durability and long life.
• Steel skid plates with rubber inserts protect the tool and help to stop it from sliding.
• Depth adjust wheel with numbered detents helps drive nails to the proper depth into a variety of materials.

User questions & answers

Question:	dose it have charger
Answer:	No
Question:	What size compressor is recommended for this device. what psi is needed
Answer:	1 horse power and up and for psi you will need between 9.5-11.5 psi
Question:	How many nails per second
Answer:	They quote up to 10 nails per second, so basically it will keep up with you unless you have superhuman capabilities. I know from experience it shoots faster than I can nail.

Product description

The Makita 1-3/4" Roofing Coil nailer (model AN454) combines rugged construction and robust performance with less weight (only 5.2 lbs.). The AN454 accepts standard .120 shank diameter Coil roofing nails from 3/4” to 1-3/4” nails in length. The AN454 is engineered for longer tool life with durable and lightweight aluminum housing and an easy-loading adjustable canister. Ease-of-use features include a "tool-less" Depth adjustment engineered for more precise control and flush nailing. Additional features include large carbide inserts on the nosepiece for long lasting performance. Oversized steel wear plates are engineered to reduce abrasion on the tool.

• Faster nail driving speed for maximum performance
• Aluminum housing for longer tool life
• Lightweight design at only 5.2 lbs.
• Easy, one-step open, Adjustable canister system for faster, more precise nail loading
• “Tool-less” depth adjustment dial for more precise control in flush nailing shingles

User questions & answers

Question:	Could this be used to nail up fence boards
Answer:	no, You would be better off with a siding nailer the nails are longer and they are ringshank so they hold a lot better.
Question:	The Product Information says that this is corded electric for the power source. Isn’t it pneumatic
Answer:	YES ITS PNEUMATIC. RUNSON. APPROX. 110 PDS.

Product features

Makita AN454 1-3/4" Coil Roofing Nailer

The Makita 1-3/4" Roofing Coil Nailer (model AN454) combines rugged construction and robust performance with less weight (only 5.2 lbs.). The AN454 accepts standard .120 shank diameter coil roofing nails from 3/4” to 1-3/4” nails in length. The AN454 is engineered for longer tool life with durable and lightweight aluminum housing and an easy-loading adjustable canister. Ease-of-use features include a 'tool-less' depth adjustment engineered for more precise control and flush nailing. Additional features include large carbide inserts on the nosepiece for long lasting performance. Oversized steel wear plates are engineered to reduce abrasion on the tool.

Product description

The BOSTITCH BRN175A bulldog 15 degree Coil roofing nailer combines performance and adjustability to handle roofing applications. This light weight 4.8Lb roofing nailer drives 3/4" to 1-3/4" Coil roofing nails. It has two firing modes, single sequential and contact mode, which can be selected using the dial above the trigger. There is a wheel to adjust the drive depth so that nails can be properly installed into a variety of materials. The exhaust cap can swivel so that the exhaust is always pointing away from the user, and the shingle guide under the magazine can be adjusted for proper shingle spacing.

• Upgraded engine and feed system improves drive quality, overall performance, and durability
• Dual door MAGAZINE can be closed multiple ways
• Oversized tool free depth adjustment for proper nail setting
• Carbide nose inserts help to protect the nose from wear
• Redesigned grip handle for better feel

User questions & answers

Question:	Does this nailer require a compressor
Answer:	Yes, this is pneumatic powered.
Question:	Where is made
Answer:	The country of origin of the BRN175A is Taiwan.
Question:	Does this also shoot siding coil nails
Answer:	It absolutely will NOT. I thought maybe it would from reading other reviews. It will just jam up every time

Product description

Remember when you could re-roof your roof? Nail shingles, insulation boards, waterproof tar paper, fiber cement roofing, siding, vinyl and more with the WEN Pneumatic Coil Roofing Nailer. The versatile magazine holds up to 120 nails at a time, allowing for sizes of 11-gauge (.12 inches) nails ranging from 3/4 of an inch all the way up to 1-3/4 of an inch. Adjust the depth of the fired nails by turning the depth-setting wheel found on the head of the nailer. Clear jammed nails with the quick-release compartment on the side of the magazine. The adjustable shingle guide easily slides up and down the bottom of the magazine to help with quick and easy spacing for shingles of any size. This powerful nailer provides up to 430-inch-pounds of force at a 100 PSI operating pressure, making sure your siding stays in place. The rubber grip handle helps limit fatigue and maximize comfort during long jobs while the turnable exhaust valve on top of the nailer lets users aim the direction of the output air. With a 1/4-inch NPT air inlet, drive fasteners using pneumatic pressure anywhere from 70 to 120 PSI. This package also includes a bottle of oil, three assorted hex wrenches and a convenient blow-mold carrying case for easily transporting your nailer. And, because its a WEN product, your coil roofing nailer comes backed by a one-year warranty and a friendly customer phone line all to make sure you remember WEN.

• Fire 11-gauge nails (.12 inches) anywhere from 3/4 to 1-3/4 of an inch
• Adjustable shingle guide and depth control makes for easy shingle spacing during jobs
• Holds up to 120 nails at a time with a quick release for easily fixing jams
• Uses pneumatic operating pressure anywhere from 70 to 120 PSI
• Includes a blow mold carrying case, oil, and hex wrenches

User questions & answers

Question:	Can this gun be used for siding
Answer:	It will shoot 1 3/4 na ils and they will hold hardi plank siding well
Question:	Can this gun be used for vinyl siding. The nail head has to fall short of full contact with the vinyl
Answer:	Yes. Just turn down the psi on your air compressor outlet till the depth is right. When you hit a stud then tap that nail with a hammer. Or get the crapy vinyl adaptor for the front that sets the depth for you. Bostich makes one.
Question:	what is the weight of this nail gun
Answer:	This gun is F ing HEAVY a little over 11 pounds compared to most other coil nailer that weigh 5 to 7 pounds
Question:	Does this gun take roofing nails made for 15 degree guns
Answer:	Yes, I nailed about 4 square this past summer with 15 degree nails. No problems at all.

• 【Professional Nailer】Professional grade roofing nail gun designed with moving cylinder engine for low recoil. Compatible with 15 degree wire collated roofing nails from 3/4" to 1-3/4"
• 【Widely Use】Ideal for a range of materials and applications and satisfies your different need in nailing. Perfect for applications such as asphalt and cedar shingles, roof and wall sheathing, wood crate assembly, flooring underlayment, siding installation, and fences.
• 【Humanized Design】Steel contact safety with dual carbide inserts for less wear. Soft grip for comfort and control. Delivers the power to consistently drive nails in the toughest applications.
• 【Big loading capacity】Big loading capacity (120PCS) magazine will fasten a full bundle of shingles without reloading. Nails load from the side fast and easy
• 【Special Improvement】Magnetic nail holder aligns the nails when loading and ensures jam-free firing. Tool-less depth of drive adjustment for precision nailing/flush driving

User questions & answers

Question:	Does it shoot 3/4" nails good or will it miss fire
Answer:	I don’t believe it can. Mine will say 32-35 on the front but opening it for a few seconds will make it jump to the low 40’s

Product features

Show Detail:

Its heat treated special alloy iron drive pin, wear-resisting bumper and O-rings allow continuous heavy duty work. Extra bumper packed individually as a gift.

Professional Roofing Nail

Professional grade roofing nail gun designed with moving cylinder engine for low recoil.

Soft grip for comfort and control. Delivers the power to consistently drive nails in the toughest applications.

Safety Instruction:

1.Keep children away.

2.Use safety glass and ear protection.

3.Never use oxygen,combustible or any other bottle gas.

4.Do not direct the adjustable vent hole to the operator or other person or animals during the use.

5.Do not use on scaffoldings, wagons.

Roofing Nail Gun

1.360° adjustable exhaust.

2.Tool-less depth of drive adjustment.

3.Ergonomically designed comfort grip.

4.Extra bumper packed individually as a gift.

5.Heat treated special alloy iron drive pin, wear-resisting bumper and O-rings allow continuous heavy duty work.

6.With aluminum magazine, it only weighs 6lb.

High quality

New structure/ high strength materials/ Big loading capacity/ Easy to use

Product description

The NV45AB2 1-3/4-Inch Roofing Nailer is used for various construction work such as the installation of asphalt roofing shingles and the installation of insulation boards. The NV45AB2 has a side load magazine. When only the best will do for roofing applications, choose the roofing nailer that has been sought after by professionals for decades.

• APPLICATIONS: Ideal for installation of asphalt roofing shingles and insulation boards
• EASY FASTENER INSTALLATION: Side loading magazine, convenient and easy for quick replenishment
• LIGHTWEIGHT: At only 5.5 Lb., the NV45AB2 is lightweight and well balanced for easy maneuverability
• SPEED: Quick driving system, for maximum efficiency
• DEPTH ADJUSTMENT: Tool-less depth of drive adjustment, for precision nailing/flush driving
• RUBBER PADS: Help keep nailer from sliding off roof when not in use
• CARBIDE TIPPED PUSH LEVER: Reduces wear
• DURABLE: Pneumatic power feed and return, allows tool to operate in the harshest conditions

User questions & answers

Question:	Recommended air pressure
Answer:	Hello, Thank you for your interest in the Metabo HPT Roofing Nailer. The recommended air pressure is between 70 and 120 PSI. Thank you again and have a great day!
Question:	Can I used .092” nails or do I have to use .12” nails
Answer:	Hi there! This tool only accepts nails that are .120" in diameter. Hope this helps!
Question:	Does it come with the carrying case
Answer:	No it does not
Question:	Diámetro medida de la manguera
Answer:	Muy bueno la pistola gracias

Product features

Side Loading Magazine

Convenient and easy for quick replenishment

Long-lasting Rubber Grip

For added comfort

Carbide Tipped Push Lever

Reduces wear

5.5 lbs, Lightweight and Well Balanced

For easy maneuverability

Product description

The HBT HBCN45P is designed for use with 15 degree, 7/8'' To 1-3/4'' Wire Collated roofing nails, it is an ideal tool for roofing, siding installation and wooden box assembly. This air nailer can drive roofing nails fast and hard while its lightweight design prevents user fatigue. The nail gun features an adjustable shingle guide for accurate shingle spacing and steel contact safety with dual carbide inserts for less wear. The selectable trigger makes for easy change between sequential and contact mode. It also features a tool-less adjustable depth control and 360 degree exhaust. This professional-grade tool is perfect for construction workers, roofers and anyone looking for long-lasting performance. Operation pressure: 70-120PSI, magazine capacity: 120pcs.

• Drives 11 gauge full head coil roofing nails ranging from 7/8'' To 1-3/4''
• Selective actuation switch allows for either sequential or contact mode
• Tool-free adjustable depth control helps set nails properly; adjustable shingle guide allows for quick and consistent shingle spacing
• Durable and lightweight magnesium housing helps reduce user fatigue
• Skid-resistant pads/wear guards for safety and tool protection; contact safety With Carbide inserts for less wear and tear

User questions & answers

Question:	Could anyone tell me the specific brand of 1 inch nail that would be compatible
Answer:	The tool was returned because we couldn't find any nail size or brand that would work consistently.
Question:	Does it bump nail/rapid fire
Answer:	It absolutely bump fires/ rapid fire
Question:	Is the npt 1/4 inch and does it shoot wire coulated 1 3)4 roof nails off home Depot shelf
Answer:	Yes it is 1/4" npt. It should shoot any of the 1 3/4 coil roofing nails. I have always used the fast grip brand and have never had an issue.
Question:	Can I use a Bostitch nails it should have quarter 15 degree smooth shank
Answer:	No, that will cause nail gut to jam

• 【SMOOTH PERFORMANCE】- Contact mode safety system; Sequential mode can be available by changing trigger; Quick-set depth of drive helps to reduce the possibility of nail jams and increases more than 70% operation efficiency; 360° tool-free air exhaust.
• 【REQUIRED NAIL&45-70 mm】 - Drives 15 degree, 1-3/4-Inch to 2-3/4-Inch full head coil roofing nails; Operating pressure: 75-100 PSI. Bullet Point
• 【STURDY MATERIALS】- Lightweight and sturdy. The die-cast aluminum will significantly reduce body weight while maintaining durability; High strength PC magazine can hold 200-300 nails at one time
• 【ERGONOMIC DESIGN】- Protective cover on the nose will block the debris generated during the work and improve usage safety; Dust cover will prevent dust from entering the interior of the tool, which reduces the occurrence of faults; Skid-resistant rubber grip is designed to make you feel more comfortable while working.
• 【VERSATILE APPLICATION】- Best for applications of wooden pallets, large wooden packing boxes, wooden furniture, and other wooden structures.

User questions & answers

Question:	Can you use a siding nails on this gun
Answer:	In my experience the fridge can be turned off and the settings stay the same as your last adjustment.

Product features

Efficient Operation

This coil nailer has a contact mode safety system. Its sequential mode can be available by changing the trigger. It features a quick-set depth of drive for consistent and controllable nail fit.

Nail Length & 45-70MM

It drives coil roofing nails ranging from 1-3/4" to 2-3/4" with a 15° magazine angle. The operating pressure range is 75 to 100 PSI, and you can set the ideal air pressure to start with low pressure.

Sturdy & Durable

Our roofing nail gun is made of aluminum alloy, durable yet lightweight for long life. Its high strength PC magazine can hold 200-300 nails at one time to improve production.

Safety Devices

Its protective cover improves usage safety, and dust cover prevents dust from entering the tool's interior with no dust blockage, which will not affect the performance of nailing.

Comfortable & Safe

Its unique rubber grip design is shockproof and anti-skid for manipulating ease and comfort grip, helping relieve work fatigue and maximize comfort during lengthy jobs.

Extensive Application

Our roofing nail gun is suitable for various applications: wooden pallets, large wooden packing boxes, wooden furniture, and other wooden structures.

CN70 Roofing Nail Gun

CN70 roofing nail gun is an ideal tool for roofing, exterior drywall, insulation board, and fiber cement applications. This nailer comes with all the features you might need to handle a regular roof, making it a simple choice for all kinds of standard roofing work.

Product description

Each tool repair kit contains the o-Rings as listed to rebuild your tool. Unless otherwise noted, kits include quality Buna-N O-Rings and seals equal to or the OEM parts.

All the pictures are for reference only!

• NV45AB Hitachi Coil Roofing Nailer & Trigger O-ring Maintenance Rebuild Kits
• Fit Models: Bostitch NV45AA NV45AB NV45AB2 NV45AC NV45AE
• High Performance Seal Replacements for the O-Ring
• With Parts Diagram Manual in the kit
• Note: No Pater Gasket or Seal for Cap/Frame