13 best air hoses

Product description

Flexzilla is a revolutionary hose featuring a Flexible Hybrid Polymer material that redefines flexibility. This engineered polymer-blend material permits use in environments where general purpose PVC and rubber hose may become too stiff. Flexzilla hose characteristics offer zero memory allowing it to lay flat. It won’t work against you during operation and coils easily after use. Flexzilla offers extreme all-weather flexibility, even in subzero conditions, and is ideal in both hot and cold environments where tight radius bends are needed.

• EXTREMELY FLEXIBLE - All weather flexibility (-40 Degree to 140 Degree F)
• EXTREMELY DURABLE - Abrasion resistant outer cover and crush resistant aircraft aluminum fittings with bend restrictor
• HYBRID POLYMER - Won't kink under pressure, coils easily and lays flat with zero memory
• MAXIMUM WORKING PRESSURE - 300 pounds per square inch
• VERSATILITY - Use on professional jobsites, in automotive shops or at home in the garage

User questions & answers

Question:	The picture shows 3 50ft hoses do you get 3 or just 1 50ft hose
Answer:	Just one hose. I do like this hose better than the ones I had before. It doesn't kink or stay curled up.
Question:	how do i exchnge for the warranty? i haveone with the black end blown off after purchasing it in August of
Answer:	Hello, We are sorry to hear the end of your hose has come off. Please contact our warranty department at 800-645-8258 X 121 and we will work with you to process the warranty. Thank you, Team Flexzilla
Question:	Does this 3/8 50' hose come with brass end fittings
Answer:	No. The fittings are sold separately. The hose has 3/8 non-metallic fittings to thread into a brass coupler.
Question:	What is typical way quick-connect plugs and adapters are installed on air hoses? Male on one end, female on the other? Sorry for the newbie question
Answer:	Typically, for a 3/8 inch air hose, there will be a 1/4" MNPT (male national pipe thread) nipple factory attached to each end of the hose. To add quick disconnects to the hose you will need a Quick Disconnect COUPLER (adapter), size 1/4 inch, with 1/4" FNPT (1/4" female national pipe thread) for the tool end of the hose. For the compressor end of the hose, if your compressor is equipped with a Quick Disconnect Coupler, you will only need a 1/4" size Quick Disconnect NIPPLE with 1/4" FNPT (1/4" female national pipe thread) for attaching to your air hose. If your compressor is not equipped with a Quick Disconnect you can simply attach the compressor end of the hose directly to the discharge port of your air compressor regulator. Depending on the size of the regulator discharge port, adapter bushings may be required to fit the 1/4" MNPT threading of the typical 3/8" air hose. In any case when you buy Quick Disconnect Couplers and Nipples always buy the same type and size. Quick Disconnect fittings are available in many different types and sizes. The INDUSTRIAL EXCHANGE type, and the UNIVERSAL EXCHANGE type are by far the most common types of Quick Disconnects. They are interchangeable with each other as well as with most other common types of Quick Disconnect fittings. I have never seen a portable air compressor factory equipped with a Quick Disconnect Coupler that did not accept both the Industrial Exchange, and the Universal Exchange type of Quick Disconnect Nipple in the 1/4 inch size. In this instance, 1/4 inch size is referring to the nominal size of the quick disconnect fitting, NOT the pipe thread size of the fitting.

Product features

Flexzilla Air Hose

Flexzilla is a revolutionary hose featuring a Flexible Hybrid Polymer material that redefines flexibility. This engineered polymer-blend material permits use in environments where general purpose PVC and rubber hose may become too stiff. Flexzilla hose characteristics offer zero memory allowing it to lay flat. It won’t work against you during operation and coils easily after use. Flexzilla offers extreme all-weather flexibility, even in subzero conditions.

Flexible Hybrid Polymer Air Hose

Flexzilla Air Hose has zero memory so it lays flat where you drop it. Its extreme all-weather flexibility is due to the Flexible Hybrid Polymer material that redefines flexibility. This hose won’t kink under pressure.

Extreme All-Weather Flexibility

While other hoses get stiff and brittle in cold temperatures, Flexzilla stays flexible even in subzero weather conditions.

Won’t Kink Under Pressure

Flexzilla Air Hose won’t kink under pressure! It is tangle free making work easier in the shop, around the house, and on the job!

Anodized aircraft aluminum ends

The fittings are made of anodized aircraft aluminum making them more durable and helps prolong the life of the hose.

Lightweight

Flexzilla is lighter than traditional air hoses making them easier to carry, lift and maneuver around the shop, and on the job site.

Durable

The super strong Flexible Hybrid Polymer material is durable and is engineered with an abrasion-resistant outer cover.

Product description

Class C weather, oil, and solvent resistant outer coating. Solid brass 1/4" NPT end fittings. Spiral synthetic yarn reinforcement. Max operating pressure: 250 PSI. Max burst pressure: 1070 PSI.

• Class C oil resistant EPDM rubber cover.
• Solid brass 1/4" NPT end fittings.
• Spiral synthetic yarn reinforcement.
• Country Of Origin : United States

User questions & answers

Question:	What country is this made in
Answer:	Not absolutely positive but Goodyear is an American company and should have been made in the United States. But I know that's not always the case. I've always found these hoses to be top quality for my construction business.
Question:	Are both ends male
Answer:	This Goodyear red rubber air hose has 1/4 inch male threads for connection on both ends.
Question:	Is the hose very flexible and easy to roll up
Answer:	No it's not flexible for manual rolling up. Yes if you have a reel but I don't so every time I need to coil it back up it sucks majorly. Is it durable sure but it's not easy to roll it back up! :)
Question:	I am looking for a hose that will withstand being outdoors (exposure to the sun). Does anyone of experience with this hose resistance to UV exposure
Answer:	You're really talking about material choice more than a specific product. Avoid PVC hose, avoid so called hybrid hoses that also have PVC. If your hose is stationary, you can choose one of many ways to shield it from UV/sun. If your hose is in motion outdoors you will probably prefer a polyurethane hose for the lighter weight. You can decrease UV damage rate of rubber hoses by coating them in silicone, which helps to seal them from oxygen to reduce the degradation rate, and if moving them around, reduces the abrasion rate, but may tend to increase surface grime buildup.

• POLYURETHANE CONSTRUCTION: No tangles, anti kinking, abrasion resistance, durable and light weight.
• 25 FEET-SELF COILING: 1/4 inch inner diameter by 25 feet long. This recoil air hose is much more compact light weight. When not in use. The coiled hose will snap back automatively for saving spacing and easy storage. It delivers up to 150 PSI for maximum working pressure.
• FLEXIBLE IN COLD WEATHER: -40 degrees to +150 degrees F temperature range allows you to tackle your projects regardless of the environment
• COMES WITH QUICK CONNECT FITTINGS AND BEND RESTRICTORS: Installed 1/4" heavy duty industrial quick coupler and plug for convenient to contact air compressor and air tools. Bend restrictors reduce kinking and help to increase the life of the hose. The quick coupler and plug CAN BE REMOVED by a wrench.
• WARRANTY&SUPPORT: TWO YEAR limited warranty. If any problems, please feel free to contact us.

User questions & answers

Question:	Are the connectors also 1/4 inch ID
Answer:	Dear Customer, Thanks for your question. The connectors of polyurethane recoil air hose are installed on air hose. and the ID of connectors is 0.19" (4.8mm). Thank you very much. YOTOO Customer Service Team
Question:	Exactly how far can this hose reach, fully stretched out? I need at least a 23' reach
Answer:	I use it to inflate tires on my 35ft RV onboard compressor. I needed two hoses to make things work without over stretching the hose. I think 23ft is too far for one. If you overstretch they kink then get holes in them
Question:	What is the PSI rating on this and do the connectors come with it as pictured
Answer:	Dear Customer, The maximum working pressure of this recoil air hose is 150 PSI. The hose did install a 1/4" industrial female quick coupler and a 1/4" industrial female quick plug for easy directly to connect air compressor and air tools. and we applied sealant on both end thread of air hose to make sure good sealing performance. and if you want to replace the quick coupler and plug. Please heat the area around end thread of air hose about 5 minutes. Then remove the quick coupler or plug by wrench.
Question:	Someone keeps cutting the airhose chuck off the gas station compressor. What would I need to bring to attach to your hose if cut off
Answer:	If the compressor has a quick connect male 1/4” coupler, the 1/4” female coupler on this hose should hook up fine.

Product features

YOTOO Polyurethane Recoil Air Hose (Blue)

This recoil air hose is 1/4-Inch inner diameter by 25-Feet long. It is made of polyurethane material which makes this air hose resists kinking, abrasion, UV radiation, electricity, oil, chemicals and heat. 150 PSI working pressure. Flexible at -40 to +150 degree F. This air hose is also Installed 1/4" heavy duty industrial quick coupler and plug for convenient to contact air compressor and air tools. The bend restrictors reduce kinking and help to increase the life of the hose

Installed Quick Coupler, Plug and Bend Restrictors

Installed 1/4" quick coupler and plug for directly to connect air compressor and air tools. The bend restrictors to reduce kinking and to increase the life of the hose

Flexible all weather

Excellent polyurethane material offers flexibility in all weather even at -40 to +150 degree F

Self-Coiling

Self-recoils after extension during use for save your spacing

Widely Use

Connect this air hose to air compressor. It is suitable for air nailer, air spray gun, air blow gun and tire inflator gauge.

• EXCELLENT MATERIAL: This air hose is blended rubber and PVC for heavy duty, lightweight, flexibility,abrasion resistance and all weather use.
• EASE TO USE: Equiped with 1/4” industrial quick coupler and plug for directly connect to air compressor and air tools. No need to buy seperately air fittings. The quick coupler and plug can be removed by a wrench.
• BOTH ENDS INSTALLED BEND RESTRICTORS: Bend restrictors reduce kinking and help to increase the life of the air hose
• HIGH STRENGTH: 1/4 INCH inner diameter by 25 FEET long delivers up to 300 PSI for maximum working pressure, 1200 PSI bursting pressure.
• TWO YEAR limited warranty. This hybrid air hose is ideal for garage, shop, industry, home and many other uses

Product features

YOTOO 1/4"x25' Hybrid Air Hose (Green)

YOTOO 1/4"x25' Hybrid Air Hose is ideal for garage, shop, industry, home and many other uses. The Rubber/PVC blend construction offers heavy duty, lightweight,flexibility,abrasion resistance. It is very good cold weather flexibility and coils easily for storage. Including double brass 1/4" MNPT fittings installed quick coupler and plug. The max pressure of the air hose is 300 psi. bursting pressure is 1200psi.Bend restrictors reduce kinking and help to increase the life of the air hose.

Installed Air Hose Fittings

Installed 1/4" quick coupler and plug for directly to connect air compressor and air tools. More easier and faster to use.

Installed Bend Restrictors

The bend restrictors to reduce kinking and to increase the life of the hose

Durability and Flexibility

Rubber/PVC blend construction offers heavy duty, lightweight,abrasion resistance. Flexible use at -40 to +150 degree F.

High Volume Air Flow for Widely Use

Connect this air hose to air compressor. It is suitable for air air wrench, air nailer, air spray gun, air blow gun and tire inflator gauge.

Product description

Outfitted with 1/4 in. NPT male ends, the TEKTON 6 ft. x 3/8 in. I.D. Hybrid Lead-In Air Hose is ideal for connecting supply lines, hose reels, compressors, and other system components. Even in the cold, its flexibility prevents vibrations from moving parts from traveling through the system and loosening connections or causing leaks. Solid brass end connectors never corrode and seal better against leaking than aluminum, steel, or zinc. CALIFORNIA WARNING: This product contains chemicals, including lead, known to the State of California to cause cancer, birth defects or other reproductive harm. Please wash your hands after use.

• Makes a flexible connection from rigid supply line to hose reel to isolate vibrations
• Stays flexible and easy to work with, even in the cold
• Slides over rough surfaces without abrasion
• Lightweight, low friction hybrid polymer resists kinking and tangling
• Solid brass connectors never corrode and seal better than aluminum, steel, or zinc
• Made in USA

User questions & answers

Question:	Can this be used for vacuum
Answer:	No, it would probably collapse
Question:	What is the OD
Answer:	Outside diameter of the hose is .590”
Question:	Can this be used safely between a 150psi compressor to tank 6 feet away
Answer:	According to the specs, it should be good for 300 psi. The one I have is only 3 ft long from one compressor tank to another tank. I have used it at 120 psi with no problems.
Question:	Will the ends of these twist while the hose is held still so that I can screw both ends into fixed devices
Answer:	Quick disconnect are great when you need them, but every connection is another restriction to getting air where you want it, so use as few as possible. The exception are double-female connectors, which are full ID. If in doubt put your mouth over the end of a connector and try blowing through it. I think you'll be shocked at how fast those restrictions add up, and how much long hoses hurt flow-rate. To screw the both ends of the hose in would only require ONE end to turn, which a swivel connection will do, and so will a HV Milton Type-V quick connect. Always use Milton HV Type-V connectors to get 74 instead of 40 CFPM flow. Many mfgs now support this standard. With a female air-chuck on one end, and a HV male quick connect on the other, plugged into a HV female quick connector on the tank/compressor, this will allow a small 3-10 gallon tank/compressor to fill tires at an amazing rate. For the compressor end: (this coupler has a valve in it to keep air in the tank even when nothing is plugged into it) https://www.amazon.com/gp/product/B000BVYSY2/ref=ox_sc_saved_title_2?smid=ATVPDKIKX0DER&psc=1 For the hose end: https://www.amazon.com/gp/product/B003V5NQ2U/ref=ox_sc_saved_title_1?smid=ATVPDKIKX0DER&psc=1

Product features

TEKTON 46133 6-Feet x 3/8-Inch I.D. 300 PSI Hybrid Lead-In Air Hose

Outfitted with 1/4-inch NPT male ends, the TEKTON 6-Feet x 3/8-Inch I.D. 300 PSI Hybrid Lead-In Air Hose is ideal for making flexible connections between supply lines, hose reels, and other system components.

System Connector

This short hose is ideal for connecting supply lines, hose reels, compressors, and other system components. Its flexibility prevents vibrations from moving parts from traveling through the system and loosening connections or causing leaks.

Brass Fittings

Solid brass 1/4-inch NPT male end connectors never corrode and seal better against leaking than aluminum, steel, or zinc.

Balanced Performance

Made in the U.S.A. of an advanced hybrid polymer, the hose is lightweight, abrasion-resistant, and flexible, even in the cold.

Product description

Performance Under Pressure! The Amflo 'Ultra Air' premium hybrid hose offers increased durability and cold weather flexibility over competitive hoses - perfect for commercial and industrial use. When uncoiled, this hose lays flat making it easier to use with no interruption in air flow or tripping hazards. The tube and cover are made with a rubber and PVC blend that provides greater flexibility and lighter weight, along with a usable temperature range of -10 to +150 degrees F. Braided nylon reinforcement contributes to this hoses high strength and 300 PSI maximum pressure capacity. 1/4-18 brass male NPT fittings on each end. Factory installed, PVC bend restrictors protect the ends from damage caused by repeated bending/stretching while in use. A Name You Can Trust! More than 50 years of design and manufacturing experience, coupled with premium materials and precision machined components, ensure Amflo hoses will exceed your expectations for quality and reliability throughout the life of the hose.

• Fit Type: Universal Fit

User questions & answers

Question:	Can i use this for scuba hookah diving
Answer:	Sorry, not sure.
Question:	Where is this hose made
Answer:	This hose is made in China
Question:	Can you use this on a reel easy retractable hose reel
Answer:	Yes, you should be able to put this on a hose reel.
Question:	WHere is this made
Answer:	Country of origin is China.

Product features

Amflo Air Hoses - Performance Under Pressure

Amflo offers a wide variety of hoses for Pro's and DIY'ers to suit any job or working environment. Do you work outside in the winter cold? Will you need to drag a long length of hose around to work? Is the weight of the hose important to you? Working in an environment where non-marring hose is critical? Need high capacity hoses to run demanding tools?

Whatever your needs, Amflo offers a hose with the perfect combination of features, fitting sizes, and lengths to help you get the job done.

HYBRID - The Ultimate Hose

More than 50 years of experience has resulted in our most advanced hose yet – the ‘Ultra Air’ premium hybrid air hose. Perfect for industrial or commercial use, this premium air hose lays flat when uncoiled and offers increased cold weather flexibility and rugged construction that can stand up to whatever you dish out.

POLY - Cold Weather, Scratch Free

Lightweight Polyurethane Hose is ideal for applications where dragging a heavy hose is an issue, like roofing. The smooth, non-marring finish also makes it ideal for indoor trim work where scratching surfaces could create damage. Due to very good cold weather flexibility, poly hose is perfect for year round use in temperatures as low as -30 degrees F.

PVC - Lightweight

Amflo PVC Air Hose is ideal for general purpose applications. It features a lightweight, flexible, kink-resistant design with bend restrictors. It’s bright fluorescent color options reduce the chance of tripping on the job site through increased visibility.

RUBBER - Rough Service

Amflo Rubber Air Hose is ideal for rugged applications where hoses may be dragged over concrete or other rough surfaces. The durable rubber construction offers very good cold weather flexibility and coils easily for storage. Ideal for garage, shop, industry, home, and many other uses.

NYLON RECOIL - Lightweight

Nylon Recoil Hose retains it’s self-coiling properties and stores itself when finished. Use with all air-powered equipment on the job site and in garages, plants, and service stations. Swivel end fittings reduce hose twist while bend restrictors extend hose life.

POLY RECOIL - Scratch Free

Polyurethane Recoil Hose retains it’s self-coiling properties and stores itself when finished. Ideal for use with all air-powered equipment on the job site and in garages, plants, and service stations. The swivel end fittings reduce hose twist. Bend restrictors reduce kinking and increase the life of the hose. The soft polyurethane finish is less likely to scratch surfaces than other materials.

• Blended rubber and PVC air hose is heavy duty, lightweight,flexibility,abrasion resistance and all weather use.
• Equiped with 1/4” industrial NPT fittings and quick coupler for directly connect to air compressor and air tools. No need to buy seperately air fittings.
• Bend restrictors reduce kinking and help to increase the life of the air hose
• Hybrid air hose is 1/4 INCH inner diameter by 50 FEET long delivers up to 300 PSI for maximum working pressure, 1200 PSI bursting pressure.
• TWO YEAR limited warranty

Product features

YOTOO 1/4"x50' Hybrid Air Hose (Blue)

YOTOO 1/4"x50' hybrid air hose is ideal for connecting supply lines, air tools, compressors, and other system components. The Rubber/PVC blend construction offers heavy duty, lightweight,flexibility,abrasion resistance. It is very good cold weather flexibility and coils easily for storage. Including double brass 1/4" MNPT fittings installed quick coupler and plug. The max pressure of the air hose is 300 psi. bursting pressure is 1200psi. Bend restrictors reduce kinking and help to increase the life of the air hose.

Durability and Flexibility

Rubber/PVC blend construction offers heavy duty, lightweight,flexibility,abrasion resistance.

Installed 1/4" Industrial Quick Coupler and Plug

Installed 1/4" quick coupler and plug for directly to connect air compressor and air tools. More easier and faster to use.

Installed Bend Restrictors

The bend restrictors to reduce kinking and to increase the life of the hose

Product description

Our MaxWorks retractable air hose reel with 50' rubber air hose features a fully enclosed durable alloy steel spring that will provide years of service. Multi position ratchet release to easily roll up your retractable air hose. Can be mounted on your wall, floor or ceiling for versatility and convenience. Four non-snag rollers help reduce hose wear. Precision machined full flow swivel solid brass fittings. 250 max PSI holds up 50' of hose (included).

• Includes 3/8" diameter x 50' long rubber air hose with solid brass fittings
• Maximum air pressure: 250 PSI; maximum air flow: 25 CFM
• Air inlet (female): 3/8" x 1/4" NPT
• Air outlet (male): 1/4" x 3/8" NPT
• Auto rewind with four non-snag rollers to reduce hose wear
• Fit Type: Universal Fit

User questions & answers

Question:	the compressor connection seems to be a bolt.... rather than a female threaded connection. How do you attach the hose from the compressor to the reel
Answer:	Buy a Male Quick disconnect to screw onto the end of hose. Connection on reel is for a Quick Disconnect fitting. For 3/8" air hose use these connectors: https://www.amazon.com/WYNNsky-Fittings-Industrial-Compressor-Accessories/dp/B075R1TH9Z/ref=sr_1_3?dchild=1&keywords=quick+disconnect+male+air+hose+connectors&qid=1608077977&sr=8-3
Question:	What are the mounting bracket holes width and height ?? Thanks
Answer:	I don’t know if this will answer your question but the hiles for the mounting screws are 4”horizontal from each other and 5”vertical
Question:	Can you set up to to run water through
Answer:	yes i run weed killer though it
Question:	Does “auto rewind” mean the hose is always trying to go back into the unit? Or does it stay out until you yank on it to start it back in
Answer:	It has ratcheting stopping that will alow you to stop it at any point with about 1-2 foot interval. Pull untill you hear the ratcheting, and stop. To let the hose back in, pull again and the hose will return.

Product features

Heavy Duty and Quality Parts

Spring driven mechanism for easy retraction. Solid brass fittings will provide leak-free years of service

Non-Snag Rollers

Auto-rewind air hose reel features four non-snag rollers to help reduce hose wear and make pulling and retraction easy

Hose Stop

Hose Reel is equipped with hose stop allows you to configure at desired hose length

Built-To-Last

Comes with durable 3/8" diameter x 50' long abrasion-resistant rubber air hose that will handle up to 250-PSI air pressure with machined brass fittings

• Blended rubber and PVC air hose is heavy duty, lightweight,flexibility,abrasion resistance and all weather use.
• Equiped with 1/4” industrial NPT fittings and quick coupler for directly connect to air compressor and air tools. No need to buy seperately air fittings.
• Bend restrictors reduce kinking and help to increase the life of the air hose
• Hybrid air hose is 1/4 INCH inner diameter by 25 FEET long delivers up to 300 PSI for maximum working pressure, 1200 PSI bursting pressure.
• TWO YEAR limited warranty

User questions & answers

Question:	What is the O.D. measurement
Answer:	Not sure of od but id is 1/4 . However don't buy hose if you plane on using it . Very poor quality hose ends fell off mine in only one month, same you money till you can afford
Question:	can I used this hose on my Porta cable pancake compressor
Answer:	Dear Customer， Yes. You can use this air hose on the Porta Cable air compressor. This air hose installed 1/4" industrial quick coupler and plug on both ends. It will helps you connect this air hose to air compressor and air tools directly. Thank you.
Question:	Are the manufacturer-installed plug and coupler easy to remove so I can use my Milton V-series high-flow plug and coupler
Answer:	Dear Customer, Yes. The air hose quick coupler and plug can be remove easily by wrench. Thank you.
Question:	How plyable / i guess straight is it. I am done with hoses that reconfigure back to a hoop as soon as you go to use them. Does it develope a memory
Answer:	Dear Customer， This air hose is no memory，It is flexible and lays flat. This is a rubber and pvc hybrid air hose. Thank you.

Product features

YOTOO 1/4"x25' Hybrid Air Hose (Blue)

YOTOO 1/4"x25' hybrid air hose is ideal for connecting supply lines, air tools, compressors, and other system components. The Rubber/PVC blend construction offers heavy duty, lightweight,flexibility,abrasion resistance. It is very good cold weather flexibility and coils easily for storage. Including double brass 1/4" MNPT fittings installed quick coupler and plug. The max pressure of the air hose is 300 psi. bursting pressure is 1200psi. Bend restrictors reduce kinking and help to increase the life of the air hose.

Durability and Flexibility

Rubber/PVC blend construction offers heavy duty, lightweight,flexibility,abrasion resistance.

Installed 1/4" Industrial Quick Coupler and Plug

Installed 1/4" quick coupler and plug for directly to connect air compressor and air tools. More easier and faster to use.

Installed Bend Restrictors

The bend restrictors to reduce kinking and to increase the life of the hose

Product description

This convenient hose kit features Flexzilla Pro Air Hose with a Red Industrial (Type D) 1/4 in. body ColorConnex coupler and plug set (one each). Pairing Flexzilla’s revolutionary design with color-coded ColorConnex means two great products in one. Since the coupler and plug are already installed with thread sealer, you’re ready to go as soon as you reach the job site!

• Extremely Flexible – All-weather flexibility (-40 Degree to 140 Degree F)
• Extremely Durable - Abrasion resistant outer cover and crush resistant aircraft aluminum fittings with bend restrictor
• Won't Kink Under Pressure - Hybrid polymer coils easily and lays flat with zero memory
• 300 Pounds per square inch - Maximum working pressure
• Field repairable - Reusable fittings can be repaired on job site in a few simple steps, includes ColorConnex industrial plug & coupler

User questions & answers

Question:	Hello. Can these hose be use in an autobody shop
Answer:	Hello, Thank you for reaching out! Yes, you can use this product in an autobody shop. Please give us a call at 800-645-8258 if you have any further questions. Thank you, Team Flexzilla
Question:	Could this hose be used with fuel oil? I know that neoprene is oil resistant
Answer:	No fuel The ones for the fuel are a special kind
Question:	Is this hose UV resistant
Answer:	I use mine daily outside framing houses and I can say that I’ve gotten rid of all of my polyurethane hoses
Question:	What is the difference between the 1/4 and
Answer:	Hello, Thank you for your question. The 1/4 and 3/8 measurements refer to either the inside diameter of the air hose or the size of the male threaded ends. If you have additional questions, please contact us at 800-645-8258.

Product features

Flexzilla Pro Air Hose Kits

Flexible Hybrid Polymer Air Hose

Flexzilla Pro Air Hose comes with reusable fittings. The air hose has zero memory so it lays flat where you drop it. Its extreme all-weather flexibility is due to the Flexible Hybrid Polymer material that redefines flexibility. This hose won’t kink under pressure.

Field Repairable Air Hose

Flexzilla Pro Air Hose features field repairable reusable fittings. Simply cut, install, and tighten the fitting and your back to work.

Extreme All-Weather Flexibility

While other hoses get stiff and brittle in cold temperatures, Flexzilla stays flexible even in subzero weather conditions.

ColorConnex Coupler and Plug

ColorConnex is a patented system that allows color-to-color matching of couplers and plugs among the standard pneumatic interchanges. By using ColorConnex to dedicate line use, you can ensure you never use a lubricated line for a dry line application, preventing cross contamination.

• Match coupler and plug types
• Dedicate hose applications
• Industrial (Type D): Red

Won’t Kink Under Pressure & Lightweight

Flexzilla Pro Air Hose won’t kink under pressure. It is tangle free making work easier in the shop, around the house, and on the job.

Flexzilla is lighter than traditional air hoses making them easier to carry, lift and maneuver around the shop, and on the jobsite.

Durable

The super strong Flexible Hybrid Polymer material is durable and is engineered with an abrasion-resistant outer cover.

• Polyurethane: Anti-kink, Abrasion, Grease Resistant, Durable and Lightweight
• 25 FEET SELF-COILING: 1/4" ID and 25 ft. Long recoil hose snaps back into shape, preventing kinks and tangles to aiding in wear resistance of hose, no more wasting time coiling your hose for storage. It delivers up to 120 PSI for maximum working pressure.
• PU HOSE: Hromee recoil hose is constructed with the super-flexible polyurethane (PU) whose soft finish is less likely to scratch surfaces. It also features anti-kink, abrasion, oil, grease resistant, more durable and lightweight than nylon.
• COUPLER&PLUG KIT: This hose is equipped with one 1/4'' NPT universal coupler which fits Industrial (I/M), ARO (A) and Automotive (T) and two pieces I/M type plugs. Heavy duty steel air fittings are ideal for general purpose applications and the anodized color coating has good durability and high scratch resistance.
• SPECIAL DESIGN: The hose is equipped with double swivel 1/4” MNPT brass ends. Bend restrictors reduce kinking and increase the life of the hose. Due to very good cold weather flexibility, polyurethane hose is perfect for year round use in temperatures as low as -20℃.
• EAST TO USE: With high visibility color red, you can quickly find your hose easily on a busy job site - then attach tools to the air supply. Perfect for all air-powered equipment on the job site and in garages, plants and service stations

User questions & answers

Question:	What is the length of the coil mass when it is all coiled up? 2 feet, 4 feet
Answer:	About 18 inches
Question:	How flexible does this polyurethane coil stay in colder climates
Answer:	I don't know, as I received mine in the summer.
Question:	Can the coupler and plug be removed
Answer:	They can be removed with a wrench.
Question:	will this work with a co2 tank with a set gauge of 150 psi
Answer:	Does not say but I would not use it for more than 150 it’s thin plastic

Product features

Polyurethane Recoil Air Hose

This Hromee polyurethane recoil hose is constructed of polyurethane, exhibits extreme, all-weather flexibility and outperforms nylon hose, giving you the strength and flexibility of. Bend resistors prevent wear and tear at the joints, a kink resistant design prolongs the using life of the hose. It features swivel fittings to reduce twist. The Coupler and plug kit offers the basic need of connection.

Note: You had better tighten the coupler and plug before using.

You need to disconnect fittings with tool.

COUPLER&PLUG KIT

This hose is equipped with one 1/4'' NPT universal coupler which fits Industrial (I/M), ARO (A) and Automotive (T) and two pieces I/M type plugs.

PU HOSE

Hromee recoil hose is constructed with the super-flexible polyurethane (PU) whose soft finish is less likely to scratch surfaces. It also features anti-kink, abrasion, oil, grease resistant, more durable and lightweight than nylon.

SPECIAL DESIGN

The hose is equipped with double swivel 1/4” MNPT brass ends. Bend restrictors reduce kinking and increase the life of the hose. Due to very good cold weather flexibility, polyurethane hose is perfect for year round use in temperatures as low as -20 ℃

Product description

This item is no longer manufactured by Michigan Industrial Tools. Solid Brass End Fittings: 1/4-Inch NPT (M) Spiral Synthetic Yarn Reinforcement and Abrasion-Resistant Rubber Outer Jacket Hose Ends are Male / Male 100% Made and Assembled in the USA 10 Year Guarantee

• Solid Brass End Fittings: 1/4-Inch MNPT
• Spiral Synthetic Yarn Reinforcement
• Abrasion-Resistant Rubber Outer Jacket
• 100% Made and Assembled in the USA
• 10 Year Guarantee

User questions & answers

Question:	I thought I ordered 2 of the hose
Answer:	It's easy to check your order after signing in to your account. It would tell you how many you ordered
Question:	Do I order 1/4 or 1/2 inch when says 1/4 intake and fitting looks 1/2? What I am hooking it to that is
Answer:	I bought this to connect my compressor to a 50' goodyear 1/2 reel. My the output on the compressor is 1/4 inch female connector so I bought a 1/4 inch male connector for this hose. I bought the 1/2 by 6' hose so that I can put the reel high up on the wall out of the way. Most tools use 1/4 inch connectors. I has to use a reducer brass fitting to get from 1/2 hose to 1/4 inch connector.
Question:	Do the threaded fittings rotate in relation to the hose
Answer:	On on this particular hose the fittings do not rotate.
Question:	what's the meaning of mnpt
Answer:	Hi Joey, mnpt stands for Male National Pipe Thread Taper (MNPT), sometimes called NPT or MPT. It means the threads are on the outside of the connector. See the second picture. Hope this helped.

Product features

Abrasion-Resistant and Solid

The Goodyear 3' x 3/8" Rubber Whip Hose is flexible, durable and would not crack easily even after multiple uses as it is engineered with a spiral synthetic yarn reinforcement. It can also handle extreme temperatures making it fit to be used during any weather conditions as it has solid brass end fittings.

• EXCELLENT MATERIAL: This air hose is blended rubber and PVC for heavy duty, lightweight, flexibility,abrasion resistance and all weather use.
• EASE TO USE: Equiped with 1/4” industrial quick coupler and plug for directly connect to air compressor and air tools. No need to buy seperately air fittings. The quick coupler and plug can be removed by a wrench.
• BOTH ENDS INSTALLED BEND RESTRICTORS: Bend restrictors reduce kinking and help to increase the life of the air hose
• HIGH STRENGTH: 3/8 INCH inner diameter by 25 FEET long delivers up to 300 PSI for maximum working pressure, 1200 PSI bursting pressure.
• TWO YEAR limited warranty. This hybrid air hose is ideal for garage, shop, industry, home and many other uses

Product features

YOTOO 3/8"x25' Hybrid Air Hose (Green+Blue)

YOTOO 3/8"x25' Hybrid Air Hose is ideal for garage, shop, industry, home and many other uses. The Rubber/PVC blend construction offers heavy duty, lightweight,flexibility,abrasion resistance. It is very good cold weather flexibility and coils easily for storage. Including double brass 1/4" MNPT fittings installed quick coupler and plug. The max pressure of the air hose is 300 psi. bursting pressure is 1200psi.Bend restrictors reduce kinking and help to increase the life of the air hose.

Installed Air Hose Fittings

Installed 1/4" quick coupler and plug for directly to connect air compressor and air tools. More easier and faster to use.

Installed Bend Restrictors

The bend restrictors to reduce kinking and to increase the life of the hose

Durability and Flexibility

Rubber/PVC blend construction offers heavy duty, lightweight,abrasion resistance. Flexible use at -40 to +150 degree F.

High Volume Air Flow for Widely Use

Connect this air hose to air compressor. It is suitable for air air wrench, air nailer, air spray gun, air blow gun and tire inflator gauge.