7 best proto torque wrench
Product description
Stanley J6064C Proto 3/8-inch Drive Ratcheting Head Micrometer Torque Wrench 40-200 in-lbs Calibrated to +/- 3% clockwise direction (for J6060A, calibrated to +/- 4% clockwise direction) and +/- 6% counter clockwise direction at 20% to 100% of full scale. Calibration is accomplished by manually loading the torque wrench. Manufactured to meet standard industrial torque applications such as general industry, heavy equipment and maintenance.
- Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction
- Calibration is accomplished by manually loading the torque wrench
- Manufactured to meet standard industrial torque applications such as general industry, heavy equipment and maintenance
User questions & answers
Question: | Why do you say it is 17 inches long and the description says 19 inches |
Answer: | The length of the micrometer torque wrench Proto J6064C is 11-21/64 in. |
Question: | Where is it manufactured |
Answer: | It is U.S. made and very durable. It will last you a lifetime. |
Question: | What is the "correct" calibration value for the j6064c? the heading mentions +/3% for j6060a, while details contradicts it. wy mix model numbers |
Answer: | 3/8" Drive Ratcheting Head Micrometer Torque Wrench 40-200 in-lbs |
Question: | What is the warranty. It says manufaturers warranty--so what is it |
Answer: | It means seller doesn't provide any type of direct warranty, only the manufacturer. Should you need to claim warranty, you must go directly to the manufacturer, not the seller. |
Product description
Stanley J6016C Proto 1/2-inch Drive Ratcheting Head Micrometer Torque Wrench 30-150 ft.-lbs Calibrated to +/- 3% clockwise direction and +/- 6% counter clockwise at 20% to 100% of full scale. Calibration is accomplished by manual loading the torque wrenches. Manufactured to meet standard industrial torque applications, general industry, heavy equipment and maintenance. Overall length of the wrench is 21 inches
- Calibrated to +/- 4% clockwise direction and +/- 6% counter clockwise at 20% to 100% of full scale
- Calibration is accomplished by manual loading the torque wrenches
- Manufactured to meet standard industrial torque applications, general industry, heavy equipment and maintenance
- Made in the USA
User questions & answers
Question: | What's the difference between this and J6014C that goes to 250 ft. lbs and sells for only |
Answer: | J6016c- 150 ftlb 21 inch total lengh. J6014c- 250 ftlb 26 inch total lenth. |
Question: | For those who have purchased this (here or elsewhere), have you noticed a noise like a loose spring or something similar when rotating the tool |
Answer: | I have not noticed any problems at all. I do set unit back to low setting like 30 pounds for storage after torquing my 4X4 truck wheels. |
Question: | how long is the wrench |
Answer: | The wrench is 21 1/2 inches long |
Question: | Does this torque wrench come with a hard case |
Answer: | Yes comes in a very nice hard plastic case. Gray in color and is designed to hold 2 different length torque wrench. |
Product description
Calibrated to +/- 4 Percent clockwise direction and +/- 6 Percent counter clockwise at 20 Percent to 100% of full scale. Calibration is accomplished by manual loading the torque wrenches. Manufactured to meet standard industrial torque applications, general industry, heavy equipment, and maintenance. 3/4-Inch Drive Ratcheting Head Micrometer Torque Wrench - J6020AB Limited Lifetime Factory Warranty Head Width (in) : 2-5 / 8 Head Depth (in) : 2-1 / 16 Overall Length (in) : 41-9 / 16 Style : Micrometer Finish : Full Polish Head Width (in) : 2-5 / 8 Head Depth (in) : 2-1 / 16 Overall Length (in) : 41-9 / 16 Weight lbs : 15.50 Style : Micrometer Finish : Full Polish
- Calibrated to +/- 4 Percent clockwise direction and +/- 6 Percent counter clockwise at 20 Percent to
Product description
Stanley J6006CXCERT Proto 3/8-inch Drive Ratcheting Head Micrometer Torque Wrench 16-80 ft.-lbs Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction. Calibration is accomplished by mechanical loading of each wrench in a horizontal position and performing a three click test at 20%, 60% and 100% of maximum instrument capacity. Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology). Manufactured to meet precision/highly accurate applications such as military and aerospace.
- Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction
- Calibration is accomplished by mechanical loading each wrench in a horizontal position
- Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology)
- Manufactured to meet precision/highly accurate applications such as military and aerospace
- Made in USA
Product description
Stanley J6006C Proto 3/8-inch Drive Ratcheting Head Micrometer Torque Wrench 16-80 ft.-lbs Calibrated to +/- 3% clockwise direction and +/- 6% counter clockwise at 20% to 100% of full scale. Calibration is accomplished by manual loading the torque wrenches. Manufactured to meet standard industrial torque applications, general industry, heavy equipment and maintenance.
- Calibrated to +/- 4% clockwise direction and +/- 6% counter clockwise at 20% to 100% of full scale.
- Calibration is accomplished by manual loading the torque wrenches
- Manufactured to meet standard industrial torque applications, general industry, heavy equipment and maintenance
- Made in USA
User questions & answers
Question: | If you purchased the wrench in 2018, did it come in a red case with a flap for a hinge, or did it come in a gray case with a true hinge |
Answer: | I purchased mine in 2019 and came in a gray case with true hinge and two plastic latches. |
Question: | Hi, does this proto j6006c tool have dual scale, primary scale in pound-foot (16-80) and secondary scale in nm (xx-xx |
Answer: | Yes it does, pound-foot on one side of the handle and nm on the other. There is also a conversion chart in the instructions. |
Question: | In 2019, is the blow mold case red with a flap-type hinge or gray with a pin-type hinge? Thank you |
Answer: | Red with a flap type. |
Question: | What is the country of origin? Made in U.S.A |
Answer: | United States |
Question: | Are they still usa made? The listing shows the country of origin as china |
Answer: | Monday July 11, 2016 Oconee Date Reported by Repeater / Phone District County Jul-11-2016 Burke Ema JEFF/ 706-554-6651 Oconee Burke Fire Name: Location to Fire:151 Nelson Cates Rd. Reported Time: 1457 Acres: 1 Controlled:7/11/2016 1600 Mopped Up:7/11/2016 1619 1619 1. Crew Dispatched:Burke 31 Dispatched 7/11/2016 1458 Departed 7/11/2016 1501 Arrived 7/11/2016 1522 Release 7/11/2016 1630 2. Crew Dispatched:Burke 63/73 Dispatched 7/11/2016 1458 Departed 7/11/2016 1506 Arrived 7/11/2016 1536 Release 7/11/2016 1630 Remarks: Monday July 11, 2016 Oconee Date Reported by Repeater / Phone District County Jul-11-2016 Burke Ema JEFF/ 706-554-6651 Oconee Burke Fire Name: Location to Fire:151 Nelson Cates Rd. Reported Time: 1457 Acres: 1 Controlled:7/11/2016 1600 Mopped Up:7/11/2016 1619 1619 1. Crew Dispatched:Burke 31 Dispatched 7/11/2016 1458 Departed 7/11/2016 1501 Arrived 7/11/2016 1522 Release 7/11/2016 1630 2. Crew Dispatched:Burke 63/73 Dispatched 7/11/2016 1458 Departed 7/11/2016 1506 Arrived 7/11/2016 1536 Release 7/11/2016 1630 Remarks: I purchased a Proto 6014C 50-250 ft-lb torque wrench thru Amazon. It says USA on the tool and the case. It's a good tool and I'm very pleased with its performance it has not missed a beat in all kinds of weather, and does what its supposed to do. |
Question: | Where is it made at |
Answer: | According to protoindustrial.com, their tools are made in the USA. http://www.protoindustrial.com/en/about/Pages/CompanyProfile.aspx |
Question: | Does it come with a calibration certificate |
Answer: | Yes. |
Question: | Is the J6014PBF red plastic case included |
Answer: | yes, it came in the red plastic case. |
Product description
Stanley J6008C Proto 1/2-inch Drive Ratcheting Head Micrometer Torque Wrench 16-80 ft.-lbs Calibrated to +/- 3% clockwise direction and +/- 6% counter clockwise at 20% to 100% of full scale. Calibration is accomplished by manual loading the torque wrenches. Manufactured to meet standard industrial torque applications, general industry, heavy equipment and maintenance.
- Calibrated to +/- 4% clockwise direction and +/- 6% counter clockwise at 20% to 100% of full scale
- Calibration is accomplished by manual loading the torque wrenches
- Manufactured to meet standard industrial torque applications, general industry, heavy equipment and maintenance
- Made in USA
User questions & answers
Question: | Does this item come with a storage case |
Answer: | It does come with the hard case together with the calibration cert. I ever purchase this item for my client and recall that the hard case is in red colour. |
Product description
Stanley J6014CXCERT Proto 1/2-inch Drive Ratcheting Head Micrometer Torque Wrench 50-250 ft.-lbs Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction. Calibration is accomplished by mechanical loading of each wrench in a horizontal position and performing a three click test at 20%, 60% and 100% of maximum instrument capacity. Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology). Manufactured to meet precision/highly accurate applications such as military and aerospace.
- Quantity: 1
- Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction
- Calibration is accomplished by mechanical loading each wrench in a horizontal position
- Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology)
- Manufactured to meet precision/highly accurate applications such as military and aerospace
User questions & answers
Question: | Where is it made |
Answer: | It does not. It will start to smell like whatever product you use on your hair after a while. |
Question: | Does it come with a calibration certificate |
Answer: | Hi there, thank you for your questions. Yes, we have the Major beard brush in both versions - stiff and soft bristles. We hope it helps. Best, Luiza |
Question: | How many teeth does the ratchet head have |
Answer: | Yes, exactly! |
Question: | Does it come in a box? What is blackhawk compared to proto |
Answer: | I don’t know but very nice set. From boxing to quality seems to be a good company put a smile on my face especially with their note. I hope it is! |
Question: | Are they still usa made? The listing shows the country of origin as china |
Answer: | I only used it on my damp hair. However, I see no reason why not. Love the brush. It is smooth and does not snag or pull even tangled hair. |
Question: | Where is it made at |
Answer: | This boar hair brush has a coat of paint on the outside. I think there is no problem with short time contact with water, and it should be ok to dry it in time after contact with water |
Question: | Does it come with a calibration certificate |
Answer: | I bought it as a gift to my best friend, she likes it very much, no one can resist good-looking things. |
Question: | Is the J6014PBF red plastic case included |
Answer: | The set we ordered did not include a net. If you're hard-core ping pong players, I'd advise ordering some higher quality ping pong balls as well. |
Latest Reviews
View all
Grateful Dead Vinyl
- Updated: 16.03.2021
- Read reviews

Box Watches
- Updated: 16.03.2021
- Read reviews

Diaries
- Updated: 03.02.2021
- Read reviews

Moses Baskets
- Updated: 10.03.2021
- Read reviews

Buddy Backpacks
- Updated: 09.07.2021
- Read reviews