14 best performance tool corded drills

Product description

The DEWALT DW124 1/2-inch Joint and Stud Right Angle Drill handles just about any sized hole quickly and easily. Its intuitive design provides for greater leverage and control during use, making it easier than ever to handle the toughest jobs. The DW124's triple gear reduction controls the 300/1,200 RPM motor so you get the right amount of torque for a variety of jobs, and the mechanical-slip clutch gives you total control of reactionary torque in low gear. To ensure a high level of performance for a long time, the durable DW124 features 100-percent ball bearing construction.

From the Manufacturer

The 1/2-inch DW124 was designed for the plumber and electrician to drill larger holes safer and faster. Drill your holes up to 2-9/16-inch at 1200 rpm and your larger holes, up to 4-5/8 inches, at 300 rpm. The mechanical clutch in the 300 rpm setting will engage at 70 ft./lbs. of torque, preventing kick-back. The Joist and Stud drill's extra length provides more leverage, while its compact head will fit with accessories between standard studs. Includes two-position side handle, chuck key and holder, and ball handle.

• 100 percent ball-bearing construction provides durability and longer tool life
• Mechanical-slip clutch in low gear to provide control of reactionary torque
• Adjustable front handle and 2-position side handle provide maximum leverage and control
• Mechanically controlled 2-speed to match rpm/torque to application requirement
• Triple gear reduction provides increased torque and reduces gear stress 21-inch overall length provides greater control and leverage

User questions & answers

Question:	Is this drill small enough to drill holes between 12" on center studs
Answer:	it is about 5 inches from end of chuck to back of drill so it would depend on how long of a drill bit you use.
Question:	does this drill come with a plastic case
Answer:	No that does not have a case
Question:	Does this come with a case
Answer:	DW124 does not. However, DW124K does.
Question:	What is the deference between this model dw124 and the dw124k
Answer:	DW124K will include the carrying case whereas DW124 does not.

Product description

Ideal for ship and hobby use. Drills metal, plastic and wood. Fully adjustable machined table tilts 45 degrees left and right. Cast iron construction. 1/2" spring loaded chuck with protective guard and 2-1/2" vise. CSA Approved.

From the Manufacturer

Ideal for shop and hobby use. Drills metal, plastic and wood 1/2-Inch Spring loaded chuck with protective guard and 2-1/2-Inch Vise Fully adjustable machined table tilts 45 Degree left and right Cast iron construction CSA Approved.

• Ideal for shop and hobby use
• Drills metal, plastic and wood
• 1/2-Inch Spring loaded chuck with protective guard and 2-1/2-Inch Vise
• Fully adjustable machined table tilts 45 Degree left and right
• Cast iron construction CSA Approved

• 🎁【❤ The Best Gift 2020】🎁
• ▲【 POWERFUL 6AMP MOTOR】710W 6Amp Powerful motor drives the hammer drill to a high speed of 2800RPM; Come with rich accessories, ideal for installing chandelier, procesandoing furniture, wall, door, and other DIY job for the metal, glass, stone and wood, which means that most of your needs can be met
• ▲【 HAMMER & DRILL 2 FUNCTIONS IN 1】With a dual-mode selector, just switch it to easily convert drill and hammer drill function, hammer drill function introduces a pulsating action that helps drive masonry bits through hard surfaces, provides greater impact force and saves more efforts; The Drill mode has a more controlled torque and is intended for drilling holes through softer surfaces, such as wood or plastic
• ▲【 VARIABLE SPEED TRIGGER & FORWARD AND REVERSE SWITCH】Comes with a variable speed trigger(0-2800 RPM), this hammer drill allows you to set any speed of your choice, which responds to the amount of pressure you apply, offers a greater degree of speed control. Forward and reverse function can be easily switch according to your tasks, such as complete the job of tightening or loosening screws
• ▲【 360° ROTATING AUXILIARY HANDLE & METAL KEYED CHUCK】With the adjustable anti-skid auxiliary design, the rotating auxiliary handle adds flexibility and offers a better grip, convenient for operation at any angle. The metal chuck achieves more precise control, it's keyed design is much safer than normal chucks where the drill bit can slip in some cases, and it is suitable for drill bits with diameter (≤1/2 inch) to meet your various requirements
• ▲【 10 DRILL BITS SET】10Pcs different sizes, different materials drill bits make this electric drill set an ideal tool for different kinds of applications and you can choose one for yourself accordingly, such as drilling into wood, metal, plastic, masonry and concrete

Product features

TACKLIFE 1/2-Inch(13mm) 6AMP/2800RPM Corded Dual Hammer Drill for Dry Wall, Wood, Stone, Steel with 10Pcs Drill Bits, Depth Gauge, Handle - PID01A

TACKLIFE 1/2-inch hammer drill features a pure copper motor of 6Amp, offering strong power to the drilling work, rotating speed can be up to 2800RMP, 12 dials variable speed knob and trigger allow you to choose the exact speed for different tasks. With a metal chuck, it is easy to change drill bits within a diameter of 1/2 inch(13 mm). The compact body, weighs only 5.5lbs, makes it an ideal drill for different working scenes.

Hammer & Drill 2 Functions in 1

• Before starting drilling, choose the hammer or drill function by switching the button on the top of the machine.
• The Hammer function introduces a pulsating action that helps drive masonry bits through hard surfaces, provides greater impact force and saves more efforts.
• The Drill mode has a more controlled torque and is intended for drilling holes through softer surfaces, such as wood or plastic.

PLEASE NOTE:

This hammer drill can't be used in reinforced concrete walls.

Variable-speed Trigger and Knob & Forward and Reverse Button

• The speed knob with 12-levels speed dial, which allows you to set a maximum speed before drilling.
• The variable-speed trigger allows you to change the speed for different applications.
• The lock-on button keeps one speed permanently to free your finger for long hours working.
• Forward & Reverse switch provides more convenience to tighten and loosen screws.
• The metal chuck achieves more precise control, it's keyed design provides greater grip of the drill bit and prevents the drill bit from falling off during work

Practical 10 Drill Bits Set

5 Twist drill bits for steel plate and wool(mm) : 4/5/6/7/8

5 Drills bits for brick(mm) : 4/5/6/7/8

Scaled Depth Gauge

The detachable depth rod allows you to determine exactly how deep the bit should go to meet the individual requirements of the task.

Rotatable Side Handle

360° rotatable side handle enables you to choose the best grip for your drilling work. Without any tools, the handle can be quickly installed and removed.

Product description

3/8 in. Keyless chuck which will handle all small to medium bits. 400 Watt 3.8 amp 120v motor will handle most household jobs. Variable speed reversible for total control. Built in belt clip for safety and portability. 6 ft. 2-pronged power cord.

• 3/8 in. Keyless chuck which will handle all small to medium bits.
• 400 Watt 3.8 amp 120v motor will handle most household jobs.
• Variable speed reversible for total control.
• Built in belt clip for safety and portability.
• 6 ft. 2-pronged power cord.

Product description

Delivers increased drilling performance and increased overload protection for added durability. 0-1250 RPM (revolutions per minute), variable speed reversing switch for increased versatility. 980 UWO (unit watts out). 1/2" Keyed chuck for greater bit retention. 360 deg (Degree) locking side handle for greater control and versatility. Anti-slip Soft grip handle and two-finger trigger for increased comfort. Metal gear housing for jobsite durability and increased reliability. 4.9 lb. (Pound). 3 year limited warranty. This product is manufactured in Mexico. This product meets customer requirement.

Versatile and easy to handle, the DEWALT DWD210G 1/2-Inch VSR Pistol-Grip Drill delivers the power you need for all your jobsite drilling and fastening needs. The DWD210G features variable-speed control, a convenient reversing switch, a comfortable pistol grip, and an auxiliary handle.

Patented DEWALT-Built Motor with Overload Protection

With its powerful 10 amp motor, the DEWALT 1/2-Inch VSR Pistol-Grip Drill is capable of delivering speeds of 0 to 1,200 rpm. This translates to quick, versatile drilling and driving.

At the heart of this drill's performance is a patented DEWALT-built motor that generates 50 percent more power than a standard motor of the same size. It also provides increased overload protection for extended tool life.

Designed for Versatility and Durability

As versatile as it is powerful, the DWD210G functions well for both steel and wood applications. When working with a spade or auger bit in wood, it offers a 1-1/2-inch capacity, and it can handle a capacity of 2-9/16 inches when used with a self-feed unit. The drill can also handle a 1/2-inch twist bit when working with steel. When used with a hole saw, the drill offers a 3-5/8-inch capacity in wood and a 2-inch capacity in steel.

Its keyed 1/2-inch chuck grips the bit securely to prevent slippage, and a metal gear housing provides added durability.

Built with Comfortable, Accurate Handling in Mind

Comfortable handling goes a long way toward ensuring accurate results. The DWD210G is built with an ergonomic grip, and its two-finger rubber trigger makes power control easy. A locking, 360-degree, soft-grip side handle gives you hand-position options for improved user comfort and better overall command of the drill. And it weighs an easy-to-manage 4.9 pounds, decreasing user fatigue after extended use.

The DWD210G 1/2-Inch VSR Pistol-Grip Drill comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box

DWD210G 1/2-Inch VSR Pistol Grip Drill, 360-degree locking side handle with soft grip, and chuck key with holder.

From the Manufacturer

Pistol grip 1/2-Inch variable speed with reverse drill 10.0-Amp motor delivers increased performance 0-1200 RPM, variable-speed reversing switch for versatility. Soft grip handle and two-finger trigger provides comfort. Metal gear housing for jobsite durability and reliability.360-Degree locking side handle. Generates more power with improved overload protection for added durability.

• Country of Origin:Mexico
• Package length:11.0"
• Package width:14.0"
• Package height:4.0"

User questions & answers

Question:	Will this drill be able to bore out 1 1/4" holes in 4x4 studs
Answer:	No. There is no trigger lock on this otherwise excellent drill.
Question:	Any masonary bit included
Answer:	Yes and very easy to switch between forward and reverse. We have really put this drill to work and are very happy with its performance.
Question:	Has anyone found a good case for this drill
Answer:	Most electric (mains powered/cord) drills make terrible screwguns and this drill is no exception. The issue is torque, which is not effected much by the speed of an electric motor. Electric motors deliver almost 100% of their available torque immediately upon being energized and will produce that same amount of torque throughout their speed range (that's why freight trains, in the US, are driven by electric motors. The engines you hear are diesel electric generators which power the electric traction motors that make the train go. Without that instantly available torque the train would never move). All electric motors deliver torque like this. It has nothing to do with a brand. That instantly available torque is also what makes mains powered drills tear up screw heads, break screws, shred driver bits and cam out of the screw head to put the distinctive track marks on walls and furniture. It's also what makes mains powered drills perfect for drilling holes, which is precisely what they're designed to do. Since you can't do anything practical to change the way electric motors work the solution is to design the screwgun around a motor with less torque and lower power requirements. It doesn't take much torque to drive a screw (next to none if properly sized pilot holes have been drilled) and useful levels of screwdriving torque can easily, and conveniently, be provided by 18v-24v which can be had in a small rechargeable battery. Unless you're doing a LOT of 1/4"+ diameter hole making buy an inexpensive mains powered drill and spend the extra money on a nice cordless driver/drill and batteries. You'll get a lot more mileage for your money that way.
Question:	Why is speed described as 0-1200 RPM and review says it starts at either 250 or 600 RPM? I need something with true variable speed
Answer:	Stability is better with the mid grip over the pistol grip in the sense that your hand is closer to the target rather than behind the whole drill. It has better control and is easier to keep on the head of a screw or what have you. :)

Product features

DWD210G

The DWD210G 1/2" (13mm) VSR Pistol Grip Drill has a powerful 10 Amp motor with overload protection to drill at 0-1250 rpm in forward or reverse. Constructed with soft grip handle for comfort and housed in metal gear for durability.

Special Features

As versatile as it is powerful, the DWD210G functions well for both steel and wood applications. When working with a spade or auger bit in wood, it offers a 1-1/2-inch capacity, and it can handle a capacity of 2-9/16 inches when used with a self-feed unit. The drill can also handle a 1/2-inch twist bit when working with steel. When used with a hole saw, the drill offers a 3-5/8-inch capacity in wood and a 2-inch capacity in steel.

Its keyed 1/2-inch chuck grips the bit securely to prevent slippage, and a metal gear housing provides added durability.

Product description

Performance Tool W54019 19 Inch Plastic Tool Box Is heavy duty, with recessed ergonomic comfort handle, removable tray and lid organizers, strong double latch with padlock eyehole.

• Heavy-duty box with recessed ergonomic comfort handle
• Removable tray & lid organizers
• Strong double latch with padlock eyehole
• 19" Plastic Tool Box
• Heavy-duty box with recessed ergonomic comfort handle
• Removable tray and lid organizers
• Strong double latch with padlock eye hole

User questions & answers

Question:	is there room for a hammer
Answer:	Plenty of room
Question:	Re. the 26 inch steel tool box only. is it waterproof or even splash proof
Answer:	Yes 26inch not splash proof
Question:	What are the exterior dimensions of the 16" toolbox? The label in the 16" product photo gives the dimensions of the 12.5" toolbox
Answer:	Sorry, I do not know the exterior dimensions of the 16" toolbox- I bought the 18" toolbox.
Question:	what are the inside dimensions
Answer:	11 1/2 L x 5 3/4 W x 2 1/4 deep beneath trayor 4 inches deep with no trayThe try is about 1 3/4 space to lid.I bought it for a sewing kit...needles, thread, scissors, bobbins, pins. The lid has a section that opens separately from the interior and has several compartments for small items

Product description

For big projects, the SKIL 6335-02 7.0 amp 1/2 inch corded drill has a powerful motor that gives serious DIY'ers the power to bore through hard and soft woods and other materials. Hold steady with the side-assist handle. The variable speed trigger accelerates smoothly from low to high speeds, while the 2-finger trigger with lock-on option gives you even more control. The 6335-02 Corded Drill also features a built-in level and keyless chuck, which takes ½-inch bits for the toughest jobs.

• Poweful 7.0 Amp motor for tough applications
• 1/2 inch keyed chuck to accept large diameter bits designed for wood working and cutting
• Side assist handle for controlled, accurate drilling
• Variable Speed trigger for controlled drilling speed

User questions & answers

Question:	What is the Torque rating
Answer:	You MAY NOT use this device with 220 volts power without step-down transformer 220v to 110v. This transformer shoud be capable to transform at least 1KW (1000W) of power (twice of the device power consumption - 110v * 4 Amps = 440W for this drill). Such transformer is big ang heavy (of about 5-7Kg). If you connect 110v device with 220v power outlet using only plug adaptor you'll get smoke and completely dead device usable as garbage only.For market with 220v this MATRIX system is branded as "Multievo". Try to find it on the European market for example.
Question:	What is the chuck diameter (?43mm
Answer:	Variable speed = Trigger. "Would this work?" = Probably, however, the correct answer is that I can't really tell you based solely on the thickness of the material. Two other variable exist: the size of the hole and the quality of your bits. Most drills and bits out there can do (1) 3/8" thick hole through annealed high carbon steel, however, if you use cheap bits, and/or the wrong amount of pressure/speed, that bit won't drill another hole. I give that size hole simply because of the chuck size. If you get bits with a smaller shank and larger bore size you can do larger holes.
Question:	Is this drill free wheeling when you let off the trigger
Answer:	3/8" chuck but if u can buy a 1/2" drill bit that has a shank turned down to 3/8" now u have a 1/2" drill or bigger because u can get other size bits with a 3/8" shank the end that goes into your chuck. FYI
Question:	What is the maximum speed
Answer:	For those of you who came looking to see if the product had been improved in recent years, literally zero of these comments are helpful. The manuals on the accessories (c. 2015) show a 10-20% LOSS of power in the corded model. I don't know, however, what the amps were on my original corded and whether or not this model is more powerful than the 2015 version.

Product features

Power through tough jobs like a pro

The SKIL 6335-02 7.0 Amp 1/2 In. Corded Drill is driven by a 7.0 amp motor that empowers the drill to perform tough jobs with utmost ease. The drill works smoothly in various metal surfaces and wood. It can also drill holes in concrete surfaces. The 1/2 inch keyed chuck is perfect for woodworking as it lets you use bits with a large diameter.

Ergonomically Designed

The drill is so light weight that it is easy to maneuver and to carry out any job. Also, it has a side-assist handle that provides the user a support and hold on the machine. For additional safety and control, it features a 2-Finger trigger with lock-on.

Variable Speed Options

The variable Speed trigger present on the drill gives the user the much needed control over the drill. The user can adjust the speed of the drill according to his need and as per the requirement of the job. Any speed you choose, the Horizontal bubble level ensures perfect outcome, every time.

Product description

A tough job is no match for this powerful 7.5-Amp hammer drill. The 2-finger, variable-speed trigger (0-3,000 RPM) has a convenient lock-on feature for increased control during driving and drilling. And the 48,000-BPM provides the power needed for tough applications. The heavy-duty 1/2-in keyed chuck accepts large-diameter bits designed for woodworking and cutting, and a side-assist handle allows for controlled and accurate drilling in any task. This kit also includes a 100 Piece bit set for drilling into surfaces like wood, metal, plastic, and masonry.

• Versatility at its best — From tightening screws to drilling into wood, metal and even concrete, this versatile hammer drill is the ideal DIY tool for a variety of home projects.
• Powerful – This drill is equipped with a high torque 7.5 Amp motor that makes it ideal for the most demanding projects.
• TACKLES TOUGH JOBS – This ½” heavy-duty keyed chuck allows for larger bits to power through heavy duty jobs.
• Speed control – The 2-finger variable speed trigger provides increased control.
• Drill longer & more comfortably – The lock-on button lets you to drill for long periods of time. This prevents finger fatigue and allows for different holding options for greater stability.

User questions & answers

Question:	Does this come with 2 cases? 1 for the Drill and 1 for the drill bit set
Answer:	Hello, This model comes with one case that holds the drill and bit set. Thank you for your inquiry!
Question:	This prouduct made in USA
Answer:	ASSEMBLED in the USA. Like nearly all products sold these days, parts were probably made all over the world.
Question:	Why is there so much sparks in the housing before even drilling
Answer:	It is not a brushless motor. The one I purchased had the same issue. I drilled about 9 holes with it and it burned out. Returned for refund.

Product features

2-in-1 Multi-Function

Easy switch between drilling and hammer drilling, ideal for a wide range of drilling and hammer drilling applications

Side Assist Handle

For improved safety and accuracy.

100 Piece Bit Set

All the bits you need to get your projects done.

More About This Product

• Variable-speed trigger (0-3,000-RPM)
• 48,000-BPM
• Power: 7.5 Amps

Product description

Designed for high-performance job sites, the PORTER-CABLE PC600D 3/8-inch variable speed drill provides reliable power and durability for projects requiring extended tool usage. With a high-output, 6.0 amp motor capable of 0 to 2, 500 revolutions-per-minute (RPM), the PC600D 3/8-inch drill is designed to provide the speed needed for a variety of drilling applications. The high-torque gear design makes the drill ideal for metal and wood fabrication, pilot hole drilling in deck building or frame construction, and other applications requiring the extended run-time of a corded drill.

From the Manufacturer

Variable speed drill is powered by 6.0-Amp motor, which delivers power in demanding applications. Keyless 3/8" chuck allows fast and easy bit changes and its variable-speed trigger provides 0-2500 RPM, providing results in various drilling and driving uses.

• 6.5-Amp motor delivers power in demanding applications
• Keyless 3/8-inch chuck provides fast and easy bit changes
• 0-2500 RPM variable speed trigger provides the best results for drilling and driving
• Lock-on button provides easier control during prolonged use

User questions & answers

Question:	Does the lock on button hold at variable speeds or only at full speed? Thanks for your time
Answer:	I’m not sure about the torque rating but I can tell you I put down a 12 x 12 deck with 3/1/2” Screws with no problem
Question:	Which one do i buy - this one or skil 6335-01 7 amp 1/2-inch drill (provided both have the same price
Answer:	Hi PPaine! This drill features a 1/2 inch keyed chuck. Thanks for your question!
Question:	Can it drill in reverse
Answer:	Thank you for the question! When you release the trigger the drill may continue to rotate momentarily as it comes to a stop.
Question:	would this drill have enough power to drill through glass with the correct bit of course
Answer:	Hi Nit! This variable speed drill offers up to 950 rpm. Thanks for the excellent question!

Product features

PORTER-CABLE Corded Drill

What makes the Drill stand out and gives it the power that it runs on is the high performing Motor that delivers 283 Units Watt out. To sustain the performance every machine needs a power -packed battery and in this case, the drill has within a 20V MAX Lithium ion batteries with 1.3 amp/hour cells.

Fast Bit change feature

The drill has a ½” chuck on it that is keyless which means it will save the additional effort of changing the bit with the help of a key.

Easy to work with in confined spaces

The PORTER-CABLE PCC601LB Lithium Ion Drill is small in size and light weight that is 8.25” long and 3.5lbs respectively. Adding to the ease of usage, the drill has an LED light to help use it in dark spaces.

• Hammer and drill 2 functions in 1: This coded drill has hammer function, so it is called hammer drill and both impact drill. According to your task, switch the button on the top to select hammer and drilling functions; Hammer function for drilling on concrete and drilling function for drilling holes on steel plates and wood. It can't be used in reinforced concrete walls
• High performance and drilling capacity: This hammer drill is powered by a 4.5A motor, making it suitable for home drilling tasks into a variety of materials, such as wood, metal or plastic with a no load speed of 3000 rpm. Its max drilling capacities are: Wood - 25 mm, steel - 13 mm and concrete - 13 mm
• 1/2'' Keyed chuck and depth gauge: This drill is equipped with a sturdy and durable chuck, which is suitable for a variety of drill bits. Firm and non-slippery. The maximum chuck diameter of this impact drill is 1/2''. It comes with a keyed chuck for quick easy changes of drill bits. The built-in depth gauge allows you to determine exactly how deep the bit should go to meet the individual requirements of the task
• Lightweight and ergonomic: This electric drill has been designed with low weight of 1.56KG in mind to ensure the drill is easy to use and to help reduce user fatigue on long drilling applications. The compact design of this hammer drill enables comfortable use and allows access to tight spaces. A 360° auxiliary ergonomic handle with anti-slip function for better control the drill
• Lock-on button and reverse switch: The lock-on button gives the user the option to keep the machine continually running when doing repetitive operations. Reverse switch for your convenience. You will get 1* GALAX PRO Hammer Drill, 1* Chuck Key, 1* User Manual, 1* Warranty Card

Product features

Compact design & Ergonomic Design

Product description

A powerful 6-amp motor makes this corded drill ideal for a range of household tasks. A compact design of the corded electric drill fits in tight spaces, and variable speed allows controlled drilling and driving.

• This electric drill is powerful and compact to get the job done
• Variable speed on the corded drill is designed for control during drilling/driving
• Corded power drill has on board bit storage for convenience

User questions & answers

Question:	Is there a bag or recommended carrying case
Answer:	The recommended bag is part # 90533670.
Question:	Can you control speed in driver mood
Answer:	Yes, our 6 Amp 3/8 in. Drill/Driver features Variable Speed for Controlled drilling/driving (variable speed trigger).
Question:	What type of drill bits does it take
Answer:	Standard round drill bits. Has twist type chuck on it.
Question:	what are the rpms
Answer:	From the product description... "This drill operates from 0-1,500 rpm"

• High efficient: 600 watts pure copper motor generates more power and provides added durability as well as overload production for drilling in steel, concrete and other hard materials
• Speed adjustable: speed setting knob and variable speed trigger allow you to control drilling speed at 0 to 3000 RPM; Contoured handle perfectly conforms to your hands and reduces hand fatigue; Variable speed allows for precise hole placement on work surface
• 2 Models: Drill and hammer drill models for wood, steel or masonry applications
• Lightweight: Lightweight at 3.3 lbs for greater ease of use and maneuverability
• Convience: Lock on button provides easier control during continuous use operation; Forward and Backward pushrod brings the flexible operation

User questions & answers

Question:	Can it drill through house external stucco
Answer:
Question:	hi. is it variable speed. thanks
Answer:
Question:	Can it drill through house external stucco
Answer:
Question:	How long is this drill from the end of the chuck (retracted) to the back of the handle? Does it fit between studs with a 6" bit
Answer:

Product features

GALAX PRO 600W Impact Hammer Drill with Variable Speed Dial for Stone/Masonry/Brick Metal & Wood Drilling

Specifications:

Voltage: 120V/60HZ

Chuck Capacity: 1/2''(13mm)

Power Input: 5 Amps

Max Watts Out: 600 watts

No Load Speed: 0-3,000 rpm

Max. Drilling Capacity: Wood 25 mm, Steel 13 mm, Concrete 13 mm

Spindle Thread: 1/2-inch

Adaptation Diversification of 2 Modes

-----The hammer drill and drill modes provide versatility for drilling into the metal, wood, concrete, brick, block and other masonry materials.

Speed adjustment

------ Variable speed trigger with a dial for precise operation allows for precise hole placement on work surface.

Easier and safer operation

Forward and Reverse ability for easy adjustment according to tasks. 360° side handle with depth rod offers greater control, versatility, and increased depth accuracy.

• Powerful motor: The 6.0 Amp pure copper motor offers more than enough torque for any job you'd need a 3/8" drill to accomplish; Suitable for drilling and chipping on wood, masonry, steel, wall, concrete and other hard materials
• Variable speed trigger and lock-on: Equipped with a variable-speed trigger(0-3200RPM), designed for easy two-finger operation with a lock-on feature for continuous operation, offers a nice "two fingered" control and makes it easier to maintain the desired speed
• Ergonomic design: Soft rubber handle design to comfortably fit in hand for improved control with minimal vibration; Aluminum gear housing adds durability and efficiently dissipates heat; The compact design of this drill allows access to tight spaces
• 3/8 Inch keyed chuck: Provides a 3/8 inches keyed chuck and a hole designed for key storage. The keyed chuck holds the drill bit in place and you need to tighten before drilling. It is greatly improving user security
• What you get: 1*G LAXIA 56209 electric drill, 1* carbon brush, 2* screwdriver bit, 3*drill bit, 1* chuck key, 1* manual, 1* warranty card; 24 months warranty

User questions & answers

Question:	Do do you control the speed of this power drill? There is no speed knob on a trigger
Answer:	press your finger on the trigger slowly for more or less speed there is no speed knob
Question:	does it come with variable speed
Answer:	YES, you can adjust the speed by control the speed setting knob and speed trigger.
Question:	what size of the chuck
Answer:	This hammer drill's chuck size is about 3/8inch(10mm).
Question:	can i lock the speed when i need
Answer:	YES, you can. There is one button on the handle near the trigger switch that you can push when you need lock the speed.

Product features

Wide Application

This drill is designed to provide a high level of torque while delivering optimal RPM and an industrial three jawed keyed chuck ensures the power is delivered to the work piece. The cast aluminum gear case and double gear reduction provide maximum speed and higher torque. The reverse switch and trigger lock provide continuous uninterrupted operation.

Screwdriver bit and drill bit

3/8 Inch keyed chuck

Variable-speed

Specifications:

Product description

Transforms your power drill into a power nut drive. Ball bearing ensures sockets are securely seated. Chrome vanadium steel construction. 2" hex shank. 1/4, 3/8 and 1/2" drive.

• 2" hex shank
• 1/4, 3/8 and 1/2" dr
• chrome vanadium steel construction
• chrome vanadium steel construction
• transforms your power drill into a power nut driver