13 best breaker bars

Product description

Heavy-duty power for really stubborn nuts and bolts. Extra long handle- (24 inches) length provides incredible leverage at anvil; contoured grip for sure grip. Anvil head rotates 180-degrees for increased versatility. Break bar made with heat-treated Chrome-Vanadium steel construction for long-life durability. Mirror-chrome finish is corrosion resistant. An essential tool for every professional and serious do-it-yourselfer - a real life-saver with impossibly-tight fasteners.

From the Manufacturer

Heavy-Duty 25" Breaker Bar - 1/2"-Drive - Chrome-Vanadium Steel

• [LONG REACH]: Half inch drive premium breaker bar with a long 24-inch handle that provides ample leverage to amplify torque.
• [DURABLE]: Made of extremely durable drop forged heat-treated chrome vanadium and corrosion-resistant mirror/chrome polish finish.
• [VERSATILE]: 180-degree flexible chrome-moly head works at any angle, to reach around tight spaces and generate optimized leverage.
• [DESIGN]: Spring-load ball bearing holds sockets securely and is ideal to break and loosen rusted, stubborn or stuck nuts and bolts.
• [ANSI]: Meets or Exceeds ANSI standards ASME B107.110-2012.

User questions & answers

Question:	Can this breaker bar handle 250 ft-lbs to 400 ft-lbs
Answer:	If the ground has been simulated (I. e. acts as if it were a true ground), it will likely show 'ground'. A 'fake' ground is NOT advisable, as the user will be deceived into thinking there is a valid ground. Use a valid GROUND (to Earth or Uffer contact. See definition of Uffer Ground).
Question:	Brake bolts
Answer:	This is only a travel/storage case for the Klein Tools ET310 AC Circuit Breaker Finder.
Question:	what type of warranty does this tool come with
Answer:	The beacon unit powers up from the outlet. Without a powered outlet the beacon won't send a signal for the locator to find.
Question:	I'm debating between this breaker bar and a t-shaped / 4-way one. Which tool is easier to loosen extremely tight tire lug nuts
Answer:	The frequency is not the problem but the voltage is it, this model doesn't work with 220 v

Product features

Goodbye Stubborn Lug Nuts

Let our breaker bar do the work for you. Our 24" extra long breaker bar provides maximum torque so you work less while still getting that rusted, stubborn lug nut loose with ease.

Quality You Can Depend On

Our breaker bar is drop forged and made from high quality chrome vanadium steel with a heat treated chrome moly drive head for that dependable strength to handle all of the torque.

Safe and Secure

Even though they'll provide you with immense torque power to break those fasteners loose, never worry about damaging those lug nuts. The 1/2" drive head features a 180 degree flexible head with spring loaded ball bearings to hold your sockets securely.

Durable Chrome Moly Drive Head

Our 180 degree flex head is constructed from the highest grade of chrome moly steel that is hardened to ensure amazing performance and durability that will last through multiple applications.

Secure Ball Detent

Never worry about dropped sockets again. The ball detent feature allows your sockets to stay on tight while loosening tough bolts and lug nuts.

Polished and Grooved Chrome Handle

The polished chrome body provides a superior finish that easily wipes clean with microfiber cloth. It prevents any rusting so your breaker bar looks like new after each use. The grooved handle allows you to have a comfortable yet secure hold onto the tool.

Product description

DURATECH 3-Piece Flex-handle Breaker Bar Set, 1/4'' 3/8'' 1/2'' Drive, Heavy Duty Flex-Handle with 180°Rotatable Head Spring-loaded Detent Ball, Tough Alloy Steel Bar Torque Wrench for Car Repair

• 【High Quality】Made of premium high-strength alloy steel,the heavy duty breaker bar kit features a corrosion-resistant forged and hardened chrome vanadium steel construction for maximum strength and longer service life
• 【Flexible design】The 180-degree rotatable heads design for maximum versatility delivers torque at multiple angles for maximum reaching around tight spaces and generating optimized leverage
• 【Energy-saving operation】High quality chrome vanadium material provides a greater turning power to save effort while smoothly contoured, round profile handle for a comfortable grip and help reduce fatigue
• 【Tight Holding】Spring-loaded detent ball allows your sockets to stay on tight while loosening tough bolts and lug nuts so that you can never worry about dropped socket again
• 【Wide Application】You can use this set to get extra leverage to break and loosen rusted, stubborn or stuck nuts and bolts when you are in need in industrial, construction or mechanic work such as car and motorcycle maintenance or repairment, etc

Product features

Spring-loaded Detent Ball

Allows your sockets to stay on tight while loosening tough bolts and lug nuts so that you can never worry about dropped socket again

180-degree Rotatable Head

Delivers torque at multiple angles for maximum reaching around tight spaces and generating optimized leverage

Premium High-strength Alloy Steel

Features a corrosion-resistant forged and hardened chrome vanadium steel construction for maximum strength and longer service life

Product description

The Great Neck 1/2 In. Drive Breaker Bar by Great Neck is 18 inches for maximum torque and heavy-duty power for stubborn nuts and bolts. It features a chrome vanadium steel construction for strength and durability.

• Chrome Vanadium Steel for Strength and Durability
• Flex Drive
• Ball Retainer
• Knurled Grip

User questions & answers

Question:	Where can I get a replacement end for it
Answer:	Khanka 310 The internal dimensions. 1 1/2" deep when closed 8 3/8" long at center 8" long at both sides (tapers down) 3 3/4" wide at center 3 1/4" wide at top and bottom (tapers down) It is shorter at the sides and top and bottom but does not affect my use. It does give a bit, so you can snuggly fit tools, meters, etc.
Question:	Will the end of the 18 fit a
Answer:	The Amprobe ST-102B tester is designed to plug into and test 15 Amp, 110-125 VAC receptacles. 50 Amp outlets have a different blade configuration, not compatible with this tester. Also, the 50 Amp outlet is likely 120-240 Volts.
Question:	Where can I get repair parts for thois
Answer:	This tool can only trace to a circuit breaker via an outlet (90V to 120V). You would not be able to trace from a switch.
Question:	What is the warranty on it
Answer:	Yes it will. A GFCI trips on a 5- mili-amp current between the hot and ground (the tester simulates the leakage to ground). If your outlets are protected by a GFCI circuit breaker in the panel, that breaker WILL TRIP. If this tester does not trip a device somewhere, than the outlet being tested IS NOT PROTECTED. Either the GFCI is not working, wired incorrectly, or there is no protection.

Product description

This powerful breaker bar functions as an extension bar that securely holds socket wrench style sockets with extra leverage to break loose frozen and stuck nuts and bolts. Extended 40 in. length, 50% longer than standard, give you extra leverage and makes your job easier. The Chrome Vanadium body is paired with a Chrome Molybdenum head, making for an extremely strong and durable breaker bar. The sockets are kept firmly secure by the spring loaded ball bearing. The head rotates 230-degree to provide you with dynamic options for a variety of jobs.

• Get the extra leverage you need to break loose frozen and stuck nuts and bolts. Extended 40 in. length, 50% longer than standard, gives you extra leverage and makes your job easier
• 1 in. drive with 40 in. of extended length
• Chrome Vanadium body and Chrome Molybdenum head for extra strength
• Spring loaded ball bearing ensures sockets are securely held
• Rotates 230-degree for dynamic utilization in a variety of jobs

User questions & answers

Question:	How do I warranty my Craftsman breaker bar
Answer:	Hello, If your breaker bar is a Capri Tools brand, please contact Capri direct at support@capritools.com to process a warranty claim. For Craftsman breaker bar; I believe you can contact them, I'm sorry we are not familiar with their warranty policy. Thank you.
Question:	lifetime or 10 year warranty
Answer:	I had the same question as here, on Amazon, it states both lifetime and 10yrs. Seller says 10 yrs but on Capri's website (as of 10/5/16), it states lifetime. https://www.capritools.com/shop/12-inch-drive-breaker-bar-24-inch-crv/
Question:	If i weigh 170 pounds and i stand on the end of the bar full weight, will i have torqued to 340ft lb?? thank you
Answer:	Torque in this application will be the force applied to the bar multiplied by the distance from the axis of rotation. So yes in your application if you stand at exactly 24 inches from the end you will have 340 ft lbs of torque. Torque= Force(lbs)*Distance(feet)
Question:	Whats the warranty i just use it and it broke
Answer:	Lifetime. support@capritools.com 888-723-0550

Product features

Extended Leverage Breaker Bar

This powerful breaker bar functions as an extension bar that securely holds socket wrench style sockets with extra leverage to break loose frozen and stuck nuts and bolts. The Chrome Vanadium body is paired with a Chrome Molybdenum head, making for an extremely strong and durable breaker bar. The sockets are kept firmly secure by the spring loaded ball bearing. The head rotates 230-degree to provide you with dynamic options for a variety of jobs.

Product description

This powerful breaker bar functions as an extension bar that securely holds socket wrench style sockets with extra leverage to break loose frozen and stuck nuts and bolts. Extended 30 in. length, 25% longer than standard, give you extra leverage and makes your job easier. The Chrome Vanadium body is paired with a Chrome Molybdenum head, making for an extremely strong and durable breaker bar. The sockets are kept firmly secure by the spring loaded ball bearing. The head rotates 230-degree to provide you with dynamic options for a variety of jobs.

• Get the extra leverage you need to break loose frozen and stuck nuts and bolts. Extended 30 in. length, 25% longer than standard, gives you extra leverage and makes your job easier
• 1/2 in. drive with 30 in. of extended length
• Chrome Vanadium body and Chrome Molybdenum head for extra strength
• Spring loaded ball bearing ensures sockets are securely held
• Rotates 230-degree for dynamic utilization in a variety of jobs

User questions & answers

Question:	How do I warranty my Craftsman breaker bar
Answer:	No The circuit has to be energized. Thanks
Question:	lifetime or 10 year warranty
Answer:	No. That is the adapter unit that is pictured.
Question:	If i weigh 170 pounds and i stand on the end of the bar full weight, will i have torqued to 340ft lb?? thank you
Answer:	I have the adapter kit. The adapter kit is almost indispensible for finding the breaker driving a light socket where you don't have access to the switch for the light (or don't want to open up the switch are and get access, because it is very hard to use jumper wires to connect the prongs (intended to go into receptacles) on the CS61200 to a round recessed light fixture - you would likely make a short circuit doing it - or shock yourself. So getting the adapter for light sockets is really worth while. Now to the question of SWITCHES. It is really perfectly possible and practical to use a couple of ordinary jumper wires with alligator clips (insulated coverings on the clips being absolutely essential, as most alligator clip jumpers have) to attach the prongs on the CS61200 unit to a switch in question. It is just a bit more dangerous than using the adapter kit because if you don't use electrical tape around the prongs you will have the bare prongs on the CS61200 live with 110 or 220 volts (depending on what the voltage at the switch is). The advantage of the adapter kit is that it covers the connection between the jumpers and the prongs very nicely leaving no dangling hot conductive metal parts exposed anywhere except right at the switch. So I would say that you should get the adapter if you are a) quite a novice about using electricity and not very comfortable KNOWING what to guard or b) are going to do this quite frequently and ALSO want to test receptacles (taping and untaping the prongs would get old after a while and you would probably stop doing it conscientiously and just leave dangling hot prongs and then get hurt). But if you are willing to use electrical tape on each use or don't need to do this often you could just use basic cheap jumper wires and forgo the kit. Hope this helps.
Question:	Whats the warranty i just use it and it broke
Answer:	I don't have this instrument, but let me tell you how I trace house wiring. Plug a florescent light into the outlet you want to trace to/from, turn it on. Get an AM radio and tune it to an empty location, volume up about half-way. Hold radio against the wall. The static from the light will cause static in the radio. Then move the radio around to follow the "noise" through the walls. It DOES work.

Product features

Extended Leverage Breaker Bar

This powerful breaker bar functions as an extension bar that securely holds socket wrench style sockets with extra leverage to break loose frozen and stuck nuts and bolts. The Chrome Vanadium body is paired with a Chrome Molybdenum head, making for an extremely strong and durable breaker bar. The sockets are kept firmly secure by the spring loaded ball bearing. The head rotates 230-degree to provide you with dynamic options for a variety of jobs.

Product description

Titan Tools Ratcheting Breaker Bar is constructed from heavy-duty and durable chrome vanadium steel. Featuring full 3-way ratcheting action: right-hand thread, left-hand thread or lock. Chrome plating on bar and black oxide finish on the head are resistant to corrosion. Maximum torque: 376 ft/lbs (52 kg/m).

From the Manufacturer

For turning those hardest of hard nuts and bolts, additional length of the bar increases leverage to turn the stubborn bolts. This 1/2" drive ratchet is called a breaker bar because it has the leverage and power to turn a nut or bolt to either "break it loose" or "break it off".

• Heavy-duty and durable chrome vanadium steel construction
• Full 3-way ratcheting action
• Maximum torque: 376 ft/lbs (52 kg/m)
• Chrome plated bar and black oxide finished head are resistant to corrosion

Product description

1/2-Inch Drive x 15-Inch Breaker Bar, Cr-V, with Extra-strong Chrome-Vanadium steel alloy for superior durability.

• [LONG REACH]: Half inch drive breaker bar with a long 15-inch handle that provides ample leverage to amplify torque.
• [DURABLE]: Made of extremely durable drop forged heat-treated chrome vanadium and corrosion-resistant mirror/chrome polish finish.
• [VERSATILE]: 180-degree flexible head works at any angle, to reach around tight spaces and generate optimized leverage.
• [DESIGN]: Spring-load ball bearing holds sockets securely and is ideal to break and loosen rusted, stubborn or stuck nuts and bolts.
• [PROTECTION]: Square drive radius corners reduce socket wear by locking on to the sides of the fastener rather than the edges.

User questions & answers

Question:	where is this made
Answer:	I used this to break an axle nut loose that was spec'd to 235 ft lbs. Hope that helps.
Question:	Where can I buy the knuckle for this bar or a bar like it
Answer:	I used this on caliper frame mounting bolts that were on 17 years. Supposed to be 70 ft/lbs torque but with oxidation were much tighter. Came off with no effort
Question:	will it work to remove an anode on an r-pod trailer hot water heater
Answer:	probably 30-days but contact etoolcity about this.
Question:	Could someone use calipers to tell me the thickest part of the handle? Trying to match up a cheater pipe. Thank you
Answer:	this one by far, long and away. hands down, no contest. the length of, and pivot point (elbow bend to handle), is so different on matters of physics and my actual personal experience. It's also a well made heavy duty and heavy tool. I bought this specifically for a motorcycle wheel i couldn't get off and had broken a two quality (but obviously wrong) tools on trying to get it off. this thing took it off so easy, with so little pressure from me, that my whole world view changed. A few months later a friend called with a flat and i brought it just in case and i was again very impressed with the physics power of this thing. In that situation I we had a 4-way and it failed to break 2 of the lug nuts and so i broke out the 24 inch and they came off like butter. ___NOW!!!! the only down side is that you will need to buy a socket bit that fits this bar (it's 1/4 inch drive and not the usual, house hold 3/8 inch)....and also the socket bits that fit your needs/lugnuts/whatever... and this may include needing to get 'deep socket' set or bit. They are cheaper to buy a set off of amazon than in a hardware store and it's usually safer to just get the 'deep' since they work on all bolts and nuts...they're just a little heavy. You might also want to pick up some adaptors for both ways so your you can use all your socket wrenches with all the bits. you need a 1/4 inch to 3/8 and a 3/8 to1/4, you can skip the latter if you want but i'd really suggest getting the 1/4 inch to 3/8 so you can use this big bad boy with all your sockets.good luck and please don't hesitate to ask anymore questions.

Product features

Stunning and Sturdy Construction

The Neiko 00200A 1/2" Drive Extension Breaker Bar is a forged, chrome-vanadium steel drive tool that is heat treated to give you quality construction and durability.

Convenient Rotating Head

This Drive Extension Breaker Bar by Neiko, comes with a 180 degree flex head that allows extra mobility to reach difficult and tight spaces with ease.

Stellar Design and Higher Leverage

The Neiko 00200A 1/2" Drive Extension Breaker Bar comes with a grooved steel handle that fits perfectly in your hand to give you an ergonomic grip. Moreover, the 15 inch length gives you the right amount of leverage to break lug nuts.

Product description

With an extra long handle and a 230-degree pivoting head, the Tekton 3/4 Inch Drive x 40 Inch Breaker Bar gives you the leverage and flexibility to reach and break free rusted or stuck nuts and bolts.

• Long handle provides extended reach and the leverage to free rusted or stuck nuts and bolts
• 230-degree pivoting head lets you approach your work from any angle
• No preset head positions means you can move fluidly around obstructions along your swing path
• An internal spring controls the tension and position of the head while installing sockets or engaging fasteners
• Sleek and simple handle design offers comfort and control in a variety of one- or two-handed grip positions
• Durable chrome plated finish is corrosion-resistant and easy to wipe clean
• Stated length is true working length, from center of drive tang (at 90?) to end of handle

User questions & answers

Question:	Is the product backed by liftetime warranty
Answer:	I'd try looking around on e-bay for a replacement head.
Question:	What country is it made in? Thanks
Answer:	As long as its a 1/2 socket then yes
Question:	How do I get a replacement head for this? I was taking off a lug nut and it snapped
Answer:	I don't know if repair parts are available other than from the manufacturer. That said, if something is broken or bent on the breaker bar, you might want to exchange it for a new one under warranty.
Question:	Why are people surprised that a 3/8" breaker bar snaps when trying to loosen lug nuts ? Hello.....ever heard of
Answer:	The Great Neck website says there is a lifetime warranty for any manufacturing defects or breaking during normal use.

Product features

230° Pivoting Head

• Offering a continuous sweep through a usable 230° arc, the pivoting head lets you approach your work from any angle.
• Since there are no preset head positions, you can move fluidly around obstructions along the path of your handle swing.
• An internal spring controls the tension of the head, allowing it to hold its position while installing sockets and placing on fasteners.

Sleek, Comfortable Handle

We designed a sleek and simple handle that considers the many ways your hand interacts with the tool. Especially useful for a two-handed grip, the inside edge of the pommel is well-defined to keep your hands from slipping off the end of the handle, while its outer circumference is rounded, allowing you to comfortably apply as much force as needed.

Accurate Working Length

To be clear and consistent about the size of our breaker bars, we use the actual working length (center of drive tang to end of handle), not the overall length of the tool. This avoids any misleading overstatement of size or capability caused by the difference between these measurements.

Strong + Reliable

Our ratchets and breaker bars meet (and most far exceed) minimum industry standards for important baselines like Proof Torque, a measure of strength verified by a single-cycle test* that applies torque until the specified value is reached without failure or any permanent deformation.

*Both proof and fatigue torque specifications were approved by manufacturer on 8/8/2018

Product description

Description Model # 47017 3-Piece Set 3 Drive Sizes 180° Range of Motion Serious Torque Get tough fasteners turning again with the Craftsman breaker bar set. The flex handle set multiplies your force when you need to tighten an engine mount or are trying to break loose a seized lug. To help prevent over-tightening, this flex handle set has positive stops at 45° on each side. Durable alloy-steel construction allows these breaker bars to handle whatever you throw at them. Set includes 6" flex T handle 1/4" drive, 10" flex T handle 3/8" drive, 15" flex T handle 1/2" drive The flexible design delivers torque at multiple angles for max reach and efficiency Constructed of tough alloyed steel to stand up to any job 180° range of motion

• 6" flex T handle 1/4" drive
• 10" flex T handle 3/8" drive
• 15" flex T handle 1/2" drive
• Flexible design delivers torque at multiple angles for max reach and efficiency
• Constructed of tough alloyed steel to stand up to any job. 180° range of motion

User questions & answers

Question:	Where is it made
Answer:	Hello, If your breaker bar is a Capri Tools brand, please contact Capri direct at support@capritools.com to process a warranty claim. For Craftsman breaker bar; I believe you can contact them, I'm sorry we are not familiar with their warranty policy. Thank you.
Question:	What is the length of these breaker bars
Answer:	I had the same question as here, on Amazon, it states both lifetime and 10yrs. Seller says 10 yrs but on Capri's website (as of 10/5/16), it states lifetime. https://www.capritools.com/shop/12-inch-drive-breaker-bar-24-inch-crv/
Question:	Do these 3 breaker bar has any warranty
Answer:	Torque in this application will be the force applied to the bar multiplied by the distance from the axis of rotation. So yes in your application if you stand at exactly 24 inches from the end you will have 340 ft lbs of torque. Torque= Force(lbs)*Distance(feet)
Question:	Are these made in the usa or typical chinese garbage
Answer:	Lifetime. support@capritools.com 888-723-0550

Product description

High quality product. Color: Black. Manufactured in Taiwan.

• High quality product
• Color: Black
• Manufactured in Taiwan
• Package Dimension : 0.03 inches L x 0.03 inches W x 0.03 inches H

Product description

MAXPOWER Breaker Bar 1/2 and 3/8 Dual Drive 24-inch Breaker Bars.



a. 1/2-inch drive head delivers up to 512N.m(378lb.ft) of torque. Suitable for heavy-duty works. It is Not recommended to use a force-adding bar.



b. 3/8-inch drive head delivers up to 202N.m (149lb.ft) of torque. Suitable for medium-duty and precision works.



c. 360 degrees Head swivels, Spring-loaded ball bearing retains sockets.



d. Forged and hardened chrome vanadium steel construction



e. Smoothly contoured, round profile handle for a comfortable grip

• Dual 1/2-inch and 3/8-inch drive 360-degree rotating flex head lets you work at any angle.
• 3/8-inch drive head delivers up to 202N.m (149lb.ft) of torque. Suitable for medium-duty and precision works.
• 1/2-inch drive head delivers up to 512N.m (378lb.ft) of torque. Suitable for heavy-duty works. It is not recommended to use a force-adding bar.
• Spring-loaded ball bearing retains sockets. Forged and hardened chrome vanadium steel construction.
• Breaks loose, rusted or stuck nuts and bolts. Smoothly contoured, round profile handle for a comfortable grip.

User questions & answers

Question:	Where are these made
Answer:	I see no markings on this indicating where it was made. It's a nice quality piece, I use it often for breaking loose lug nuts. No quality complaints.
Question:	You say "lifetime" warranty, define lifetime please
Answer:	The knuckle (swivel) for the 1/2 inch drive is integral in the tool and rotates 270 degrees. Hope this answers the question
Question:	Whats the lenght on this handle
Answer:	If you have the right socket
Question:	What email address should we send a warranty request to
Answer:	Great bar. The handle is sloped.

Product features

MAXPOWER Tool

Made of forged and hardened chrome vanadium steel construction, which provides superior strength and durability.

With our flex handle in three different types, you always get the extra leverage you need to break loose frozen and stuck nuts and bolts.

If there is any issues with breaker bar or service for any reason, do not hesitate to tell us by Email- 24 Hours Service

Dual Drive 1/2 inch and 3/8 inch

Torque Up to 512N.m(378lb.ft) for 1/2 inch drive breaker bar, suit for heavy-duty works, but NOT recommended to use a force-adding bar

Torque Up to 202N.m(149lb.ft) for 3/8 inch drive breaker bar, suit for light-duty works ONLY

360 degree Flexible drive

Spring-Loaded ball bearing to secure loaded sockets on wrench

Comfortable Handle

Smoothly contoured, round profile handle for a comfortable grip.

MAXPOWER BREAKER BARS

Product description

3/8-Inch Drive x 15-Inch Breaker Bar with Heavy-duty Power for Removing Hard to Reach and Stubborn Nuts and Bolts.

• 15 Inch extra long chrome vanadium steel handle provides maximum torque
• Forged and heat treated chrome-moly 3/8” drive head for added strength and durability
• 180-degree flexible head works at any angle, to reach around tight space and generate optimized leverage
• Spring-load ball bearing holds sockets securely
• Ideal to break and loosen rusted, stubborn or stuck nuts and bolts
• Meets or Exceeds ANSI standards ASME B107.110-2012

User questions & answers

Question:	What’s the max force the wrench can take when in use
Answer:	I don't know if this item has a lifetime warranty but it is HEAVY DUTY! You are NOT going to wear it out in your lifetime. The version I have is the 40 inch by 3/4 inch drive and it makes quick work of the large lug nuts on my RV.
Question:	Why are there so many review pictures of a different wrench
Answer:	This breaker bar is made in Taiwan.
Question:	where is this made
Answer:	You shouldn't be using a 3/8" drive on a lug nut. At minimum use a 1/2" drive.
Question:	what is the max torque
Answer:	The breaker bar itself doesn’t snap, it’s the cheap attachment that breaks.

Product description

Neiko Breaker Bar 3/4" Drive x 24" inch. Long Handle. Automotive Torque Tool. CrV Steel. Quality chrome construction. 180Degree flex head lets you work at any angle

• [LONG REACH]: 24 Inch extra-long chrome vanadium steel handle provides maximum torque.
• [DURABLE]: Forged and heat-treated chrome-moly 3/4” drive head for added strength and durability.
• [VERSATILE]: 180-degree flexible head works at any angle, to reach around tight spaces and generate optimized leverage.
• [DESIGN]: Spring-load ball bearing holds sockets securely and is ideal to break and loosen rusted, stubborn, or stuck nuts and bolts.
• [ANSI]: Meets or Exceeds ANSI standards ASME B107.110-2012.

User questions & answers

Question:	Is neiko printed on the breaker bar
Answer:	The majority of Craftsman tools are not produced in the United States. They use many third party manufacturers to make their various products. Beginning in 2010, many of Craftsman's hand tools (manufactured by Apex Tool Group) began to be assembled in China in Taiwan.
Question:	Is this tool made in the USA
Answer:	Set includes 6" 1/4” drive flex T handle, 10" 3/8” drive flex T handle and 15" 1/2” drive flex T handle
Question:	How many pounds of torque can the drive take
Answer:	Craftsman still offers warranties on their tools please refer to their website and they will give you specifics
Question:	Will this breaker bar break free a lug nut out in with 450 foot lbs of torque
Answer:	In my opinion everything is garbage because of the poor steel quality manufacturers use to built tools but so far I have put this breaker bar to hell and they keep working fine would recommended take my word for it .

Product features

Goodbye Stubborn Lug Nuts

Let our breaker bar do the work for you. Our 24" extra long breaker bar provides maximum torque so you work less while still getting that rusted, stubborn lug nut loose with ease.

Quality You Can Depend On

Our breaker bar is drop forged and made from high quality chrome vanadium steel with a heat treated chrome moly drive head for that dependable strength to handle all of the torque.

Safe and Secure

Even though they'll provide you with immense torque power to break those fasteners loose, never worry about damaging those lug nuts. The 1/2" drive head features a 180 degree flexible head with spring loaded ball bearings to hold your sockets securely.

Durable Chrome Moly Drive Head

Our 180 degree flex head is constructed from the highest grade of chrome moly steel that is hardened to ensure amazing performance and durability that will last through multiple applications.

Secure Ball Detent

Never worry about dropped sockets again. The ball detent feature allows your sockets to stay on tight while loosening tough bolts and lug nuts.

Polished and Grooved Chrome Handle

The polished chrome body provides a superior finish that easily wipes clean with microfiber cloth. It prevents any rusting so your breaker bar looks like new after each use. The grooved handle allows you to have a comfortable yet secure hold onto the tool.