14 best allen wrench sets

Product description

Stored in a convenient folding case, the TEKTON 30-pc. Hex Key Set offers the most common inch and metric hex wrench sizes to remove and install most socket cap screws found in cars, furniture, equipment, and more. The versatile long arm/short arm design offers extra reach on one end and extra leverage on the other. Made from heat-treated steel, these wrenches will deliver years of consistent performance. Precisely sized ends are chamfered to slide easily into fastener, reducing wear on the wrench and damage to fastener head. The unique hinged storage case opens flat, making it easier to get wrenches in and out, and has high-visibility size markings for fast size selection.

Set Includes:

• 15-pc. long pattern hex key wrenches: 0.028, 0.035, 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 in.
• 15-pc. short pattern hex key wrenches: 0.7, 0.9, 1.3, 1.5, 2, 2.5, 3, 4, 4.5, 5, 5.5, 6, 7, 8, 10 mm
• Includes storage case

• Precisely sized, chamfered, straight ends offer a snug fit and insert smoothly into fastener head, reducing wear
• Black oxide finish protects against corrosion without added plating that could chip off under high-stress contact
• Long arm/short arm design offers extended reach on one end and extra leverage on the other
• Hinged storage case opens flat, making it easier to get wrenches in and out
• Easy-to-read sizes marked on case for fast size selection

User questions & answers

Question:	Does it include square bit and star bit
Answer:	No
Question:	How wide is the kit when fully open
Answer:	app. 10 and 3/4 inches
Question:	how accurate are the sizes? my current set has a 2mm that is actually 1.9mm so it's useless
Answer:	My calipers read 1.99mm on the 2mm and 1.49 on the 1.5mm which is well within tolerances of any set.
Question:	What's it the reason the metric's are shorter than the SAE
Answer:	I think it's just to keep them separate, the smaller ones aren't marked with the size so with the different lengths you can sort them SAE vs. Metric.

Product features

TEKTON Hex Key Wrench Set, Inch/Metric, 30-Piece | 25253

With the most common hex key sizes ranging from .028 in. to 3/8 in. and .7 mm to 10 mm, the TEKTON 30-pc. Folding Hex Key Wrench Set keeps hex keys stored in a unique hinged case with high visibility sizes that opens flat.

• Heat-treated S2 steel ( 52-58 HRC ) for ultimate strength and reliable performance, better hardness and torque than normal chrome vanadium steel (CRV)
• T-handle helps to tighten or loosen fasteners more quickly and easily
• 35 Pieces Inch / Metric / Star long arm hex key set
• Ball end design to access socket cap screws up to a 25 degree entry angle

User questions & answers

Question:	How's it working for you so far
Answer:	Love it. Exactly what I needed for work.
Question:	How long are they
Answer:	Longest one is about 7" and the shortest one is about 2.5".
Question:	what you can do with the star size
Answer:	some place like bicycles need the star wrench set
Question:	how's the quality
Answer:	I bought them for industrial use and can say that they are fair at best for that application. One of the smaller star bits and and one of the smaller hex heads rounded off on stubborn fasteners. For the price they are an excellent set for home use but might want to pay more for stronger steel if needed for industry.

Product features

A Great Combo

This 35 pieces with Inch Metric and Star allen wrench set will be an excellent deal.Comes with the regular end,ball end and star end - which will works great for using them on a angle in those hard to reach spots.All of the hex keys are long and sturdy,the hard plastic case will giving you easy unobstructed access to each wrench.

Upgraded Helping T-Handle

The strength helping T-handle is designed to reduce pressure points during continuous use.Like normal hex T-handle wrench set, It will add comfort and torque when tighten or loosen fasteners.The handle is quite simple to use - Just insert the hex keys into the hole and it will works well for you

Heat Treated S2 Steel

All REXBETI allen wrench set are made from heat treated S2 Steel,which is better hardness and torque than normal chrome vanadium steel (CRV).These wrenches will deliver years of consistent performance.

SAE Size ( 13 Pieces )

0.05, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 inch

METRIC Size ( 13 Pieces )

1.27, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 8, 10 mm

STAR Size ( 9 Pieces )

T10, T15, T20, T25, T27, T30, T40, T45, T50

• 30 pieces hex key allen wrench, 1 x storage case
• 15 x metric long arm from 0.028 to 3/8 inch; 15 inch(SAE) short arm from 0.7mm to 10mm
• Durability: Made from Hardened treated Chrome Vanadium Steel Alloy (Cr-V)
• Corrosion-Retardant: Black-Oxide Finish
• Easy Storage: Hinged cased opens flat allowing easy access to wrenches

User questions & answers

Question:	Are these magnetic
Answer:	No They are not,
Question:	Where is the product made
Answer:	It's Made in China.
Question:	what are the sizes of the wrenches
Answer:	Metric 1.27mm 1.5mm 2mm 2.5mm 3mm 3.5mm 4mm 4.5mm 5mm 5.5mm 6mm 8mm 10mm SEA 3/64, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 they are listed on sellers page! 13 metri and 13 sea
Question:	How long is the longest one
Answer:	Poor quality of metal mine striped out one use

Product features

Hex Wrench Set

Our Hex key wrench is perfect for Bike repair needs.

Perfect For

Our Hex key wrench is perfect for Auto Maintenance use.

Must Have

Our Hex key wrench is perfect for any Home use needs.

High Grade Steel

Our Hex Allen Wrench is manufactured and tested in Taiwan with high grade steel.

45 picece Ratchet / Socket Set

69 picece Ratchet / Socket Set

46 picece Ratchet / Socket Set

122 pcs Ratchet/Wrench/Socket Set

Product description

An Amazon Brand

• 26-piece long-arm hex key set for quickly tightening or loosening fasteners; standard and metric sizes
• Made of chrome-vanadium steel for rugged strength; black oxide finish for protection against corrosion; sand blasted for a smooth surface
• Long-arm design provides extended reach and enhanced leverage and torque; beveled ends ensure easy insertion
• Ball-end design allows entry angle of up to 25 degrees for easily reaching around obstructions
• Includes 2 hinged storage cases with dedicated slots and clear size markings; backed by an Amazon Basics limited 1-year warranty

User questions & answers

Question:	Is This Product Patented
Answer:	I don't know. The one I have doesn't have a flower.
Question:	Are the keys stamped with sizes
Answer:	Yes, you get a box that contains 6 packages that contain 3 filters in each package. So 18 in total as you mentioned.
Question:	Would these contain a size that will work to disassemble an ikea (i think it's malm) bed frame
Answer:	Yes, I got these before and they do fit that model perfectly
Question:	Do They Come In English And Metric Measurements
Answer:	Yes, it does. I have the stainless steel top and am using these.

• SUPERIOR STEEL MATERIAL: Made of chrome-vanadium steel for rugged strength that is heat treated, quenched and tempered for optimum strength, torque and ductility for safety.
• INCLUDED SIZES: Ball end long arm L-wrench sizes 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm. Precision machined ends provide full engagement.
• LABOR-SAVING DESIGN: The 90-degree right-angle bending process is adopted, and the longer torque design can increase the working range of the hexagonal wrench and save more labor.
• GOOD ANTI-RUST PERFORMANCE: It adopts special precision surface dyeing treatment, the hexagonal wrench is not easy to rust and is durable.
• CONVENIENT: The important thing about storing the hexagon wrench is that you can easily see the size of the wrench and take it easily. The design of the storage rack that can be rotated with one hand allows you to take out the wrench more quickly.

Product description

Forged from high quality alloy steel, high hardness, good toughness, high torque, rugged, durable. Smooth workmanship, even torque, improve work efficiency. Precisely sized, chamfered, straight ends offer a snug fit and insert smoothly into fastener head, reducing wear. Black oxide finish protects against corrosion . Long arm/short arm design offers extended reach on one end and extra leverage on the other. Folding plastic clip design, not easy to fall down. Easy-to-read sizes marked on case for fast size selection.

• Materials : Alloy steel, Net Weight: 860g
• 26 pieces of Hex Key Wrenches. Including 1. 27-1. 5-2-2. 5-3-3. 5-4-4. 5-5-5. 5-6-8-10mm, and 1/20-1/16-5/64-3/32-7/64-1/8-9/64-5/32-3/16-7/32-1/4-5/16-3/8 inches.
• Forged from high quality alloy steel, high hardness, good toughness, high torque, rugged, durable. Smooth workmanship, even torque, improve work efficiency. Precisely sized, chamfered, straight ends offer a snug fit and insert smoothly into fastener head, reducing wear.
• Black oxide finish protects against corrosion . Long arm/short arm design offers extended reach on one end and extra leverage on the other.
• Folding plastic clip design, not easy to fall down. Easy-to-read sizes marked on case for fast size selection.

User questions & answers

Question:	Do these work with peloton cleats to tighten the screws
Answer:	if it has hex screws
Question:	Can this remove window guards
Answer:	if the window guards have hex screws
Question:	Does it include a 5 mm wrench? It's all in inch so annoying to convert. Worst is after converting each one therevis no 5mm. Or is it just an estimate
Answer:	No clue, all the measurements are in the photo, you just have to convert them. Google it.
Question:	I have a loose lever style doorknob handle. there is a tiny hole where i assume i'm going to need a tiny allen wrench to tighten it. will this work
Answer:	Yes. I believe one of these Allen wrenches should fit nicely into that tiny hole.

Product features

Ball-Hex-L Key Sets in Molded Hoders

-Designed with a ball profile on the long arm.

-Provides 360 degrees of rotation at up to a 35 degree angle.

-Incluldes a burr-free short arm, allowing the user to apply maximum torque in required applications.

-Sets are available in a variety of inch and metric sizes.

-Sets also available in a variety of Long, Bright, Extra-Long Bright, and Stubby series.

-New keys are consistent with Eklind's high quality standards for reassured customer satisfaction.

YIYITOOLS HEX KEY WRENCH SET

Changzhou Yiyi Tools Factory is an extroversive enterprise with 20 years of professional experience in the production and sale all kinds of rubber hammer, dead blow rubber hammer, plastic dead blow rubber hammer, hammer with plastic, rubber hammer and the installation of the rubber and plastics products. After years of efforts, the size of the enterprise expanding continuously.

High Quality

Heat-treated S2 steel for ultimate strength and reliable performance, better hardness and torque than normal chrome vanadium steel .

The Helping T-Handle

T-handle helps to tighten or loosen fasteners more quickly and easily

Special Design

Long arm/short arm design offers extended reach on one end and extra leverage on the other.

Product description

An Amazon Brand

• Includes 3 folding hex key sets (aka Allen wrenches) for tightening or loosening screws; includes 9 SAE sizes, 8 Metric sizes, and 8 TORX sizes
• Ideal for working on bicycles, motorcycles, vehicles, furniture, machinery, and more
• Made of durable chrome vanadium steel with a black oxide finish for rugged strength and rust resistance
• Soft rubber inlays help ensure a secure, comfortable grip; keys fold down for compact storage
• Each piece measures 4.2 by 2.9 by 2.2 inches; backed by an Amazon Basics 1-year limited warranty

Product description

Forged from high quality alloy steel, high hardness, good toughness, high torque, rugged, durable. Smooth workmanship, even torque, improve work efficiency. Precisely sized, chamfered, straight ends offer a snug fit and insert smoothly into fastener head, reducing wear. Black oxide finish protects against corrosion . Long arm/short arm design offers extended reach on one end and extra leverage on the other. Folding plastic clip design, not easy to fall down. Easy-to-read sizes marked on case for fast size selection.

• Materials : Alloy steel, Net Weight: 870g
• 30 pieces of Hex Key Wrenches. Including 0. 7-0. 9-1. 3-1. 5-2-2. 5-3-4-4. 5-5-5. 5-6-7-8-10mm, and 0. 028-0. 035-0. 005-1/16-5/64-3/32-7/64-1/8-9/64-5/32-3/16-7/32-1/4-5/16-3/8 inches.
• Forged from high quality alloy steel, high hardness, good toughness, high torque, rugged, durable. Smooth workmanship, even torque, improve work efficiency. Precisely sized, chamfered, straight ends offer a snug fit and insert smoothly into fastener head, reducing wear.
• Black oxide finish protects against corrosion . Long arm/short arm design offers extended reach on one end and extra leverage on the other.
• Folding plastic clip design, not easy to fall down. Easy-to-read sizes marked on case for fast size selection.

Product features

YIYITOOLS Hex Key Allen Wrench Set-30

Changzhou Yiyi Tools Factory is an extroversive enterprise with 20 years of professional experience in the production and sale all kinds of rubber hammer, dead blow rubber hammer, plastic dead blow rubber hammer, hammer with plastic, rubber hammer and the installation of the rubber and plastics products. After years of efforts, the size of the enterprise expanding continuously.

High Quality

Heat-treated S2 steel for ultimate strength and reliable performance, better hardness and torque than normal chrome vanadium steel

Precisely sized

chamfered, straight ends offer a snug fit and insert smoothly into fastener head, reducing wear.

Special Design

Long arm/short arm design offers extended reach on one end and extra leverage on the other.

Product description

The ball end design of the TEKTON 26-pc. Long Arm Ball Hex Key Wrench Set allows up to a 25-degree entry angle so you can easily reach around obstructions. It features the most common Inch and Metric hex wrench sizes to remove and install most socket cap screws found in cars, furniture, equipment, and more. The versatile long arm/short arm design offers extra reach on one end, and extra leverage on the other. Made from heat treated chrome vanadium steel, these wrenches will deliver years of consistent performance. Precisely-sized ends are chamfered to slide easily into fastener, reducing wear on the wrench and damage to fastener head. The unique hinged storage case opens flat, making it easier to get wrenches in and out, and is color coded so you always know which set to choose.

Set Includes:

• (13) long arm hex key wrenches (inch): 3/64, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 inch
• (13) long arm hex key wrenches (metric): 1.27, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 8, 10 mm

• Ball ends allow up to a 25-degree entry angle to reach around obstructions
• Chamfered, straight ends offer a snug fit and insert smoothly into fastener head, reducing wear
• Black oxide finish protects against corrosion without added plating that could chip off under high-stress contact
• Long arm/short arm design offers extended reach on one end and extra leverage on the other
• Color-coded housing for instant identification of size Series

User questions & answers

Question:	Does this include both U.S. and metric sets? If not, which does it include
Answer:	This includes two sets both US (inch fraction) and metric (mm)--also, I've owned many, many of these sets and I really like the hinged holders on these. Drawback is the size markings on the holders wears off fairly easy--however, nobody usually uses the markings anyway--it's just pick 'til you find the right size.
Question:	How does the ball hex end help? I am unable to understand why I would need to use that end
Answer:	Once you loosen a screw with the short end, you can place the ball end in the screw to quickly remove it. This is really helpful for screws in tight places where if you flip the product you can't make a full revolution. The ball design also helps align the hex key in the screw head easier than other hex key designs.
Question:	Would someone please let me know the length of the 3/16" long arm
Answer:	About 4 3/4" long.
Question:	In what country are Tekton tools made
Answer:	Hi John. TEKTON tools are made in China, Taiwan, or the United States, depending on the item. This particular hex key wrench set is made in China. Feel free to email us at support@tekton.com or call us at 888.648.3371, if you have any other questions or concerns. Thanks!

Product features

TEKTON Long Arm Ball End Hex Key Wrench Set, Inch/Metric, 26-Piece | 25282

Designed with a ball end to access socket cap screws with up to a 25-degree entry angle, the TEKTON 26-pc. Long Arm Ball Hex Key Wrench Set features the most common hex key sizes ranging from 3/64 in. to 3/8 in. and 1.27 mm to 10 mm.

Product description

EKLIND TOOL COMPANY is America's leading manufacturer of high quality, industrial grade hex keys, made with pride in the U.S.A. since 1950. The EKLIND 10111 Hex-L Key allen wrench - 11pc set SAE Inch Sizes .050-1/4 Short series meets the most stringent requirements of professional mechanics, tradespeople, do-it-yourselfers and hobbyists.

From the Manufacturer

Eklind L-Keys are produced from the highest quality Elkind Alloy Steel. They are heat treated for maximum strength and finished to resist rust. Eklind's superior quality provides maximum torque and prevents rounding out of the key or hex socket. The Eklind 10111, Hex-L Key Inch Short Arm 11-Piece set is contained in a convenient compact molded holder that firmly retains each key in designated holes. The molded holder is color-coded, which makes it instantly identifiable; red for inch sizes, and blue for metric sizes.

• MADE IN AMERICA- High quality, Industrial Grade Professional Tools made in the U.S.A.
• SMALL SAE SET contains all of the smaller, common, popular INCH Sizes:.050, 1/16, 5/64, 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32, & 1/4
• EKLIND hex keys (allen wrenches) are used to drive internal hexagon socket (allen head) fasteners
• OPTIMUM STRENGTH- These EKLIND tools are made with EKLIND Alloy Steel that is heat treated, quenched and tempered for optimum strength, torque and ductility for safety and coated with a rust resistant finish
• IDENTIFY YOUR TOOLS- Inch sizes are color coded in red so you can reach for the correct tool quickly
• KEEP YOUR KEYS ORGANIZED- A plastic holder firmly holds each key in a sized-marked hole so you always have the size you need at-hand
• MEETS OR EXCEEDS ALL APPLICABLE STANDARDS- EKLIND tools meet or go beyond the standard regulations set forth in ANSI, ASME, RoHS, REACH, CA Prop 65 and Dodd-Frank Conflict Minerals Legislation

User questions & answers

Question:	Do these work with peloton cleats to tighten the screws
Answer:	The hex key is 7.72 in long
Question:	Can this remove window guards
Answer:	They are made in China. Craftsman is scheduled to return to the USA in the late summer of 2020.
Question:	Does it include a 5 mm wrench? It's all in inch so annoying to convert. Worst is after converting each one therevis no 5mm. Or is it just an estimate
Answer:	No there is no ball end. It is the standard or metric Allen key configuration at the end
Question:	I have a loose lever style doorknob handle. there is a tiny hole where i assume i'm going to need a tiny allen wrench to tighten it. will this work
Answer:	When the remote light is flashing, it means the car is not powered on yet. The power switch is on the inner side.

Product features

Ball-Hex-L Key Sets in Molded Hoders

-Designed with a ball profile on the long arm.

-Provides 360 degrees of rotation at up to a 35 degree angle.

-Incluldes a burr-free short arm, allowing the user to apply maximum torque in required applications.

-Sets are available in a variety of inch and metric sizes.

-Sets also available in a variety of Long, Bright, Extra-Long Bright, and Stubby series.

-New keys are consistent with Eklind's high quality standards for reassured customer satisfaction.

Product description

Texas Best Folding Metric and SAE Hex Keys | Durable Construction | New Design | 2 Pack

• TOP QUALITY SET OF FOLDING HEX KEYS: Designed for great performance, made with high quality materials and a special flexible angle for use in different occasions.
• BEST MATERIALS: High grade alloy steel for maximum performance. Surface in black finish. Meets ANSI specification.
• AVAILABLE SIZES (MM & SAE): you will acquire a high-quality set of folding hex keys with a total of 17 sizes as follows: MM (1.5mm, 2.0mm, 2.5mm, 3.0mm, 4.0mm, 5.0mm, 6.0mm, 8.0mm) & SAE (5/64”, 3/32”, 7/64”, 1/8”, 9/64”, 5/32”, 3/16”, 7/32”, 1/4”)
• YOU’LL BE A PART OF OUR FAMILY! We’re not just any old company, we are a family. Providing the absolute best customer service is the cornerstone of our business and we promise to treat you like you are part of our family. We’re located in Florida and love hearing from our customers. Your contact will be made directly with the owners of the company and we will respond to all questions, doubts and complaints. We guarantee that!
• 100% SATISFACTION GUARANTEED OR YOUR MONEY BACK: for us, it is straight forward: if you, by any chance, do not like our products, please feel free to return them and we will refund you. You can do that anytime and we promise no hassle at all. We want your purchase experience with us to be as smooth as possible. No questions asked.

User questions & answers

Question:	where is it made
Answer:	It is produced in China with high quality materials and under the supervision of Texas Best, a US based company.
Question:	How do I completely remove the plastic card they are attached to? O.o
Answer:	It is very easy: you use one of the hex keys to loosen the screw attached to the plastic of the other hex key and it will come off.
Question:	Are these made in China
Answer:	China and Taiwan

Product description

The purpose of a high quality tool is to provide a faster, easier, and less costly means of performing a task. Bondhus strives to provide not just “good” tools, but the strongest tools available anywhere. Customer satisfaction is what we strive for.

From the Manufacturer

Compact Balldriver L-wrench sets are perfect where a variety of tool sizes are required. All sets are Packaged in our patented Bondhex tool case. Wrenches slip easily into individually marked slots and twist to lock securely in place. Only available from Bondhus, Protanium(R) steel means these are the strongest ballpoint L-wrenches available.

• Angle entry up to 25 degrees on sizes 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8-Inch and 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, and 10mm
• The original Balldriver L-wrenches save time in hard to reach and blind locations
• Tools are Made in the USA with Bondhus proprietary Protanium steel and are up to 20-Percent stronger than competitor tools
• ProGuard Finish is 5 times more effective than the next leading brand in preventing rust, protecting your investment over time
• Lifetime warranty - we will replace it free of charge

User questions & answers

Question:	Are these standard length or are these longer allens
Answer:	OMG I have seen and own Allen wrenches in all lengths so who is to say what is standard. Hope this helps you. Trying to hit the largest, the middle and the smallest the 3/8" is 7" OAL. The 3/16" is 4-3/4". The smallest (.050") is 2-7/8". I find them comfortable in length. The metric version is very similar in lengths.
Question:	Will they hang from pegboard hook
Answer:	I don't think so. But! You can probably make something to hang them on with.. if not there still very well made tools for the price can't be beat.
Question:	where are they made
Answer:	'Tools are Made in the USA with Bondhus proprietary Protanium steel and are up to 20-Percent stronger than competitor tools'
Question:	Are the sizes etched onto each wrench
Answer:	sizes are not etched onto the first two small wrenches since they are so tiny and won't be able to read it. but other wrenches do have sizes etched onto them. the holder also has the sizes on them and are easy to read.

Product features

Inch/Metric Balldriver L-Wrench Double Pack 10999 (1.5 - 10mm) and 10937 (.050 - 3/8) (1)

Bondhus 20199 Balldriver Tip Hex Key L-Wrench Double Pack. Includes 10999 (Set of 9pcs with ProGuard Finish sizes 1.5mm - 10mm) and 10937 (Set of 13pcs with ProGuard Finish sizes .050 - 3/8) Packaged in Bondhex Color Coded Case.

Product description

6 pcs T-bar wrench

• ✅6PCS Metric T Wrench Set Size : 2.5-3-4-5-6-8 mm long T handle Hex key set
• ✅Fast Light speed : Slide The T-Handle To The Center Position, Hold The Free-Spinning Sleeve On The Shaft And Tighten or loosen Those hex Head screws with light speed
• ✅Powerful Spinner and Extension Bar : 3 position setting for moving left and right quickly. Long arm as extension bar or being L-handle for huge torque and strength.
• ✅Excellent grip performance: Alloy Steel strong spinner grip bar provide excellent torgue force and Black tip metal plated with Anti-Slip and Corrosion Resistance for rounding and no cam-out.
• ✅Convenience & Easy carrying package: Soft storage bag for simple rolling up and easily carry out with you when you need it .

User questions & answers

Question:	I was looking for the Metric version. Will the metric version be back in stock
Answer:	Ask the seller there good quality I use them Daly
Question:	Are this available in SAE
Answer:	This allen wrench set stampled with all sizes and the highest quality https://www.amazon.com/ROUPHY-Industrial-Strength-Increasing-T-Handle/dp/B07VT78VS3/ref=sr_1_42?crid=1712S8L2Z6WPI&keywords=hex+key+wrench+set&qid=1576057227&sprefix=hex+key+%2Caps%2C1259&sr=8-42
Question:	Has anyone stored these in the t-handle slots of a feedback sports team edition tool kit
Answer:	Yes
Question:	Is there a Torx set available
Answer:	They came in bother metric and standard set.

Product features

High Efficiency and Spinner Action

Aluminum anodized grip provides smooth spinner performance.

Switchable and Extension

Groove installations transform T-handle into L-handle for maximum torque. Long arm as extensionbar as L-handle for high strength.

3ends function as practical usage

Perfect grip and precise fit

You'll love the positive grip and precise fit of the friction-treated hex tips offer. That means less chance of rounding and cam-out.

Convenience & Easy carrying package

Softstorage bag for simple rolling up and easy carry out. These sweet wrenches will never be far out of reach with the soft storage bag. Hang it on your tool wall, toss it in a toolbox drawer or set it on your bench-top for easy access.

Product description

Key Sizes included:

8-piece metric hex key in yellow shelf: 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm.

9-piece SEA hex key in red shelf: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4".

8-piece Torx Key in blue shelf: T9, T10, T15, T20, T25, T27, T30, T40.

• Heat treated chrome vanadium steel blades with durable black oxide finish for lasting strength and corrosion resistance
• A chamfered edge helps guide the wrench for a smooth, easy entry of the hex key
• Durable composite construction with rubber side inserts allow for a secure grip
• Set included 9-piece SAE hex key set, 8-piece metric hex key set, 8-piece torx key set
• size markings are printed on the hex key for easy identification. Key Sizes: 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", T9, T10, T15, T20, T25, T27, T30, T40

User questions & answers

Question:	Where is this made
Answer:	Dear customer,though so far none of buyer store the tools into feedback sports edition yet ,but based on the dimesion,we meature,it should fit.besides,the kits also boundle with carrying bag to let yu easly store and carry,
Question:	Are they locking
Answer:	Dear Buyers,Currenly not available,we plan to announce torx set next month.

Product features

Topline 25-Piece Folding Hex Key Set

Topline 25-Piece Folding Hex Key Set is a perfect handled tool, helping you assemble furniture, tighten a handle or repair a bicycle. It’s easy to carry around or store, suitable for family or outdoor use. Brings the maximum convenience for your life.

Topline 25-Piece Folding Hex Key Set

• Easy Identification
• Durable Material
• Multiple Size
• Folding Design
• Chamfered Edge Design

Comfortable Grip

Comfortable handle is made of PP and TPR for a strong and better grip. It will be an indispensable good partner in your life and work.

Visible Size Markings

The size markings are printed on the key set, easy to identify. Make sure you pick the right one.

Durable Composite Construction

Chrome vanadium steel blades with heat treated for durability and corrosion resistance.

MULTIPLE PURPOSE