12 best wire stripping machines

Product description

Description:

Constructed from solid aircraft grade aluminum alloy, this wire stripper can withstand rigorous environment and last for years to come. Driven by a 180W motor, this stripper is super power yet energy saving. Besides, our wire stripping machine can remove the plastic and rubber insulation from undamaged scrap wire, which can be widely used in automotive wiring harness processing, aerospace wire processing, audio and data line processing, wire recycling dismantling and other industries.



Specification:

Power: 180W

Wire gauge range: 0.06” (1.5mm) ~ 0.98” (25mm)

Motor: 1/4 HP Single Phase Induction Motor, 110V 50-60Hz

Stripping speed: Approx. 50feet per minute

Overall dimensions: 9.4” x 12.6” x 12.6”



Package List:

1 x Wire Stripping Machine

1 x Feeding panel

1 x Instruction Manual

• ALUMINUM ALLOY CONSTRUCTION: Constructed from solid aluminum alloy, this wire stripper can withstand rigorous environments and easily endure years of heavy use.
• EASY OPERATION & WIDE COMPATIBILITY: The electric motor powers drill-driven technology while the adjustable blades and rollers fit all wire sizes with diameters from 0.06” (1.5mm) up to 0.98” (25mm).
• THE CROWN OF COPPER CABLE RECYCLERS: This wire stripping machine removes the plastic and rubber insulation from undamaged scrap wire - a must-have for recycling your copper cable.
• 1/4 HP SINGLE PHASE INDUCTION MOTOR: Motorized to save you time, effort, and money, it creates a fast stripping speed of 50 feet per minute, plus the hands-free design increases safety and convenience.
• PERFECTLY PORTABLE: Measured at 9.4” x 12.6” x 12.6” and weighing only 33 lb, this cable stripper is portable and convenient to move around your workstation.

User questions & answers

Question:	Will it strip CAT5 wire
Answer:	Please note that this machine will strip the wires whose diameter range is from 0.06” (1.5mm) up to 0.98” (25mm).
Question:	were can i get a new wire feed roller? the original is wore smooth
Answer:	Mine was smooth to start with it never had grooves in it
Question:	What is the extra red plug for
Answer:	Sorry, we are not sure which red plug you are talking about. Please contact us using Amazon message system for this question. We will offer further assistance to you in a timely manner. Thank you.
Question:	What sizes a wire will this strip? I seen some other ones that strip 18 gauge to 250 mcm
Answer:	Manufacturers sheet says 1.5mm to 25mm. That roughly translates to 14AWG at the low end, and off the AWG chart at the high end. We used it to strip 6AWG. It did the job. We were stripping lengths under 15'. We ran the pieces of cable through twice, to score both sides of the jacket. It made it much simpler to separate the wire from the jacket.

Product features

The Portable Cable Stripper for Scrap Copper Recycling:

Constructed from solid aerospace-grad aluminum alloy, this wire stripper can withstand rigorous environments and last for years to come. The 180W motor provides sufficient power while saving energy. Removing the plastic and rubber insulation from undamaged scrap wire has never been so effortless. If you reclaim cable for automotive wiring harness processing, aerospace wire processing, audio data line processing, wire recycling dismantling, or other industries the CO-Z Wire Stripping Electric Power Tool has the capacity and convenience to make your job much easier.

WATERPROOF SWITCH:

Waterproof buttons are safe and convenient. The blade will stop cutting immediately when you press the off button.

WIDE COMPATIBILITY:

Different sized feed holes are suitable for wires with diameters from 0.05” (1.5mm) up to 0.98” (25mm).

FAST STRIPPING SPEED:

Heavy-duty gearbox produces a fast stripping speed of 50 feet per minute, improving working efficiency.

ADJUSTABLE SCREW NUT:

You can adjust the height of the blade by turning the screw nut to fit wires of different sizes.

Specifications:

• Power: 180W
• Wire Gauge Range: 0.06” (1.5mm) ~ 0.98” (25mm)
• Motor: 1/4 HP Single Phase Induction Motor, 110V 50-60Hz
• Stripping Speed: Approx. 50 feet per minute
• Overall Dimensions: 9.4” x 12.6” x 12.6”

Product description

Description:

Constructed from solid aircraft grade aluminum alloy, this wire stripper can withstand rigorous environment and last for years to come. Our wire stripping machine can remove the plastic and rubber insulation from undamaged scrap wire, which can be widely used in automotive wiring harness processing, aerospace wire processing, audio and data line processing, wire recycling dismantling and other industries.



Specification:

Material: Aluminum Alloy Steel

Weight: 12.0 lb.

Product Dimension: 8.9” x 5.1” x 12.6”

Color: Aluminum Alloy



Package List:

1 x Wire Stripping Machine with handle

1 x Feeding Panel

1 x Drill Operated Rod

1 X Hand Crank

2 x Spanners

1 x Manual

• ALUMINUM ALLOY CONSTRUCTION: Constructed from solid aluminum alloy, this wire stripper can withstand rigorous environments and last for years to come.
• ADJUSTABLE BLADES FOR WIDE COMPATIBILITY: The adjustable blades and rollers on the cable wire stripping machine fit with all size wires with diameters from 0.06” (1.5mm) up to 0.98” (25mm).
• PERFECT FOR RECYCLING COPPER WIRE: This wire stripping machine can remove the plastic and rubber insulation from undamaged scrap wire. A must-have for recycling your copper wire!
• FAST STRIPPING SPEED: The smooth gliding hand crank rapidly strips at a speed of 50 feet per minute. The singe-phase induction ensures its safety.
• PORTABLE & CONVENIENT: Measured at 9.4” x 12.6” x 12.6” and weighing merely 33 lbs, this cable stripper is portable and convenient to use anywhere at any time!

User questions & answers

Question:	Will it strip charging cables
Answer:	Yes, it will strip charging cables.
Question:	Can it strip 14awg to
Answer:	Yes. The manual wire stripping machine can strip wires with diameters from 0.06 in. to 0.98 in. (1.5 mm to 25 mm). 14awg equals to 1.628mm. 2/0 equals to 9.266mm.
Question:	do they have replacement blades available
Answer:	They dont have replacement blades??? Well how the heck do you use it when your blade gets dull??
Question:	Whats the largest awg it can strip
Answer:	Hi, the wire gauge range is 1.5mm - 25mm.

Product features

Description:

Constructed from solid aerospace-grade aluminum alloy, this wire stripper is built to easily endure years of heavy use. Removing the plastic and rubber insulation from undamaged scrap wire has never been so effortless. If you reclaim cable for automotive wiring harness processing, aerospace wire processing, audio data line processing, wire recycling dismantling, or other industries, the CO-Z Wire Stripping Electric Power Tool has the capacity and convenience to make your job much easier.

SIMPLE OPERATION & EXTRA CONNECTION:

• Designed with a manual hand crank and the option of drill-driven operation, this wire stripping machine is convenient to use even after your arm gets tired from manual operation.

WIDE APPLICATION:

• Widely used in wiring harness processing, aerospace wire processing, audio and data line processing, wire recycling dismantling and other industries.

Adjustable Feeding Panel:

• Strips all wires with diameters from 0.06 in. to 0.98 in. (1.5 mm to 25 mm).

ADJUSTABLE BLADE HEIGHT:

• Adjust the height of the blade to various cable sizes by simply rotating the blade regulating knob.

STEEL ALLOY BLADE:

• The sharp steel blade adjusts for various cable diameters. In addition, the blade can be sharpened in order to extend its lifetime.

Product description

Constructed from Solid aircraft grade aluminum – will never bend or distort. All precision machined with 5axis CNC milling technology. Also has built in “ROMEX” adapter: Enables multi-layer wires to be cut in one shot.

• This unique cable stripper is an industrial grade automatic wire stripper for all your scrap wire
• Strips all sizes from 18 gauge wire to 250 MCM, including ROMEX and braided (stranded) wire
• Superior value to any other copper wire stripper. Even includes a free extra blade ($29.99 value)
• This drill powered wire stripping machine is manufactured in North America using top grade materials
• The Romex slot will save an additional 33% of your time over any other wire insulation stripping tool

User questions & answers

Question:	Do you hand crank it
Answer:	For the StripMeister Original you will need to use a corded or wireless drill.
Question:	Does the wire ever slide off
Answer:	Only if the blade is too loose. Once you have it tightened down, the wire will not slide off.
Question:	does it work on #14 thhn wire
Answer:	Short answer is, Yes. If I recall they say itle do down to 18 AWG, buuuut...Long answer is... The smaller the wire more finesse it takes to keep it in the grove and not jump out from under the blade. It makes a difference if its solid or stranded too. I've done alot of #14 on mine but it takes more work than, say #8 or even #10.
Question:	can you buy replacement blades for the stripper
Answer:	I think the seller has the replacement blades for sale also

Product features

Quality Manufacturing

The StripMeister Original wire stripping tool is constructed from solid aircraft grade aluminum and will never bend or distort. All precision machined with 5axis CNC milling technology. Also has built in “ROMEX” adapter: Enables multi-layer wires to be cut in one shot

Huge Capacity Range

Strips all wire sizes from #18 wire to 250 MCM, Diameters from 0.100″ (3mm) up to 0.79″ (20.1mm) including ROMEX and braided (stranded) wire. Strips up to 65 feet per minute.

Essential Components

Blade and feeder are precision machined from heat treated tool steel. Includes spiral groove feeder technology for extremely accurate wire pulling.

Product description

Manual Portable Wire Stripping Machine w/ Wire Gauge Range: 0.06"-1"(1.5mm~25mm)

This manual wire stripper is designed for stripping scrap copper wires. It's portable and energy saving, can be operated by winding the hand crank, or by starting a drill. Two feeding panels of four different sized feed holes and two blades allow your various needs. Wire Gauge Range: 1.5 mm-25 mm, Stripping Speed: About 50ft/min, high performance guaranteed.

High Performance

Has different sized feed holes for wires in diameter range 0.045"-1"(1.5mm~25mm).

Adjustable Regulating Nut

To meet your work need, the distance between the blade and shaft can be changed by adjusting the regulating nut.

Replaceable Blades

Two blades are included in the package. Their Outer Diameter is 49.5mm(1.95"),Inner Diameter 21mm(0.83")-26mm(1") and Thickness: 12mm(0.47").

Handle& Drill Driven

You can start you stripping work with a hand crank, or a electrical drill. Easy touse.

Durable& Portable

Made of durable aluminum alloy, guarantees a stable performance. Weight: 3.8kg(8.38lbs).

Widely Used

Remove the plastic and rubber insulation from undamaged scrap wire, and widely used inwiring harness processing, wire recycling dismantling, and other industries.

Specifications

Wire Gauge Range: 0.06"-1" (1.5mm~25mm)

Stripping Speed: About 50ft/min

Blade Outer Diameter: 49.5mm(1.95")

Blade Inner Diameter: 21mm(0.83")-26mm(1")

Blade Thickness: 12mm(0.47")

Material:Aluminum Alloy

Size(LXWXH): 15X13X31cm(5.91"X5.12"X12.21")

Weight: 6.5kg(14.33 lbs)

Package Content

1 x Wire Stripping Machine

1 x Replaceable Blade

1 x Feeding Panel

2 x Wrench

1 x Screw Set

• 【LARGE STRIPPING CAPACITY】- Our wire stripping machine has two feeding panels of four different sized feed holes, allowing wires in diameter from 0.06"(1.5mm) to 1" (25mm). The panel with 3 holes can be fixed accordingly, 4 mounting holes available.
• 【TWO BLADES INCLUDED】- Two blades with Thickness: 12mm(0.47") can be fast to change and Stripping Speed: About 50ft/min well performed. Blade Outer Diameter is 49.5mm(1.95") and Inner Diameter: 21mm(0.83")-26mm(1"). Blades can be adjusted up and down by twisting the regulating nut for cables in different sizes.
• 【HAND-CRANK DRIVEN】- The wire stripper can be driven by winding the hand crank, smooth and easy to use. Also you can start a electric drill to power it for a convinient and fast working.
• 【ALUMINUM & COMPACT】- This wire stripper has a compact and long lasting frame of aluminum alloy, lightweight with 3.8kg(8.38 lbs) to be portable and easy to use. It can be mounted easily to any bench or work station.
• 【VARIOUS USES】- The wire stripper machine is widely used in wiring harness processing, aerospace wire processing, audio and data line processing, wire recycling dismantling and other industries.

Product description

0. 06-0. 98 inch diameter wire stripping machine 1 cutting blade Manual Wire stripper introduction: the Manual Cranked industrial wire stripping machine features 1 Channel of cutting wheel for stripping scrap copper wire. It strips wire form 0. 06 inch up to 0. 98 inch diameter. This heavy duty industrial framed machine weighs 12 lb. And the blades have been fully guarded to ensure complete safety. We that our machine is a kind of high-qualified light weight construction, which is made of durable steel. Generally speaking, this machine can remove the plastic and rubber insulation from undamaged scrap wire, recycle copper wire and benefit from non-insulated Pure copper wire. Item Specifications: wire stripping machine range: 0. 06-0. 98 inch size: 5. 9*5. 12*12Inch weight: 12 lb. Hole: 1 Package Content 1 x wire stripping machine with handle 1 x feeding panel 1 x drill operated rod 1 x Hand crank 2 x spanner 1 x Manual

• 【ALUMINUM CONSTRUCTION】- Aluminum alloy material-manual wire Stripper with high-quality lightweight construction made of durable aluminum alloy, designed for long service time.
• 【SAFE CUTTER BLADE】- Made of durable material that lasts much longer than a traditional blade, the machine has been fully guarded to ensure complete safety. The blade and shaft achieve high working efficiency.
• 【EASY TO USE】- There is an adjustable blade, feeding panel, and nut on the cable wire stripping machine, smoothly and suitable for any shapes cable. You can mount easily to any bench or work station.
• 【HAND-CRANK DRIVEN】- It is easy to operate with hand crank or drill is driven, portable and convenient, energy saving, beautiful appearance. Also, the machine can connect to an electric drill for automatic wire stripping.
• 【WIDE APPLICATION】- This machine is automatic, and the wire range is up to 25mm, widely used in wiring harness processing, aerospace wire processing, audio and data line processing, wire recycling dismantling and other industries.

User questions & answers

Question:	how do i order replacement blades
Answer:	You have to go the site where you bought it on that same site were you bought it they sell extra blade right there ! And ask if want to buy extra blades and just order them from there
Question:	What ifthe wire has kinks in it
Answer:	Un- kink it. Cut it out.
Question:	Will it strip 4/0 wire
Answer:	Yes
Question:	Aya ke numero de grosor puedo pelar
Answer:	#4

Product features

Durable Material

With a high-quality lightweight construction, the manual wire stripper is made of durable aluminum alloy. The blades have been fully guarded to ensure complete safety.

Replaceable & Quality Blade

Quick Blade Change: Push out the shaft, and the blade comes off. The quality blade achieves high efficiency.Outer Diameter: 49.5mm(1.95");

Inner Diameter: 21mm(0.83")-26mm(1");

Thickness: 12mm(0.47")

Adjustable Feeding Panel

Suitable for removing the plastic and rubber insulation from undamaged scrap wire. You can recycle your copper wire, benefit from non-insulated pure copper wire. Have different sized feed holes.

Regulating Nut

The regulating nut allows adjustment of the distance between the blade and shaft as the work need.

Efficient Hand Cranks

With a hand crank, this manual wire stripping machine is easy to operate; the machine can connect to an electric drill for automatic wire stripping.

Wide Application

This machine is automatic, and the wire range is up to 25mm，widely used in wiring harness processing, wire recycling dismantling, and other industries.

Manual Wire Stripping Machine

This machine is Manual Wire Stripping Machine, Which uses drill or handles to strip scrap copper wire. The wire range is up to 25mm. It's easy to operate with the hand crank, or drill is driven, portable and convenient, energy saving, beautiful appearance. You can get copper wire after the single blades stripping. You can recycle your copper wire, benefit from non-insulated pure copper wire.

Product description

This machine is an automatic Wire Stripping Machine. Mounts easily to any bench or work station. High-quality lightweight construction made of durable aluminum. Used for removing the plastic and rubber insulation from undamaged scrap wire. It's easy to operate, portable and convenient, energy saving, beautiful appearance. You can recycle your copper wire, benefit from non-insulated pure copper wire.

key Features

Durable Material

Built by solid aluminum alloy material, this wire stripper can withstand the rigorous environment and last for years.

Powerful Motor

The motor's stripping speed is approx. 60 feet per minute for fast heat releasing, which achieves time and energy saving.

Sharp Blade

Built by high strength special alloy, it is easy to cut the protective cover of wire. It can last much longer service time.

Feeding Hole

Different sized of feeding holes are suitable for all sizes' wires with diameters from 0.05" (1.5mm) to 0.98" (25mm).

Heavy-Duty Gearbox

This quality gearbox leads to fast stripping speed, fixing machine position, and safe & reliable use. Besides, one pair of gloves, one wrench, and one blade are also included in the package.

Wide Application

It is suitable for different sizes of wires and perfect for recycling copper wire, removing the plastic and rubber insulation from undamaged scrap wires.

Specifications

Wire Gauge Range: Φ 1.5mm-Φ 25mm (0.05"-0.98")

Stripping Speed: 60ft/min

Voltage: 110V 50-60Hz 

Power: 1/4 HP  / 180W

Phase: Single Phase

Motor: Induction Motor

Overall Dimensions:240*320*320mm

Package Content

1 x Wire Stripping Machine

1 x Feeding Panel



1 x Instruction Manual

• 【STRONG MOTOR】- Cable wire stripping machine single phase 1/4HP 110V 60HZ, power: 180 W. With solid aluminum alloy, this wire stripper can last for years and withstand rigorous environment
• 【SHARP BLADES】- Sharp blades with stripping speed: approx. 60 feet per minute. Different sized feed holes are suitable for most of wires. Wire gauge range: 0.06-1.0 inch diameter
• 【PORTABLE & CONVENIENT】- Designed with hand cranks and drill driven technologies, this electric wire stripping machine is easy to operate. Measured at 9.6" x 12.6" x 12.6" and weighing merely 30 lb for portable and convenient to use
• 【HEAVY-DUTY GEARBOX】- Leads to fast stripping speed, fixed machine position, safe and reliable use. Fast start and stop buttons protected by plastic cover to be energy saving
• 【WIDE APPLICATIONS】- Perfect for recycling copper wire, removing the plastic and rubber insulation from undamaged scrap wires, range including 0.06" to 1" diameter cables

User questions & answers

Question:	What kind of warranty does this have
Answer:	Don’t know. Didn’t get any paperwork with it. But am satisfied with it so far. Have owned it about a year.
Question:	I searched and cannot find replacement blades for this Item. If i cant find them i wont buy it. Does anyone know where they can be found
Answer:	I bought the replacement blade the same time I ordered the machine. It was around 25.00.
Question:	will this strip 500mcm
Answer:	Yes it will easily strip 12awg to 750mcm wire. You can do 14awg and below but it takes some messing with. And honestly its not worth your time for the small stuff
Question:	Would this strip wire out of window air units. Also washer and dryers
Answer:	It will strip 12awg and to 750mcm

Product features

Portable Powered Wire Stripping Machine

This machine is an automatic Wire Stripping Machine. This machine is automatic, and the wire range is up to 25mm. It's easy to operate, portable and convenient, energy saving, nice appearance. You can get copper wire after the single blades stripping. You can recycle your copper wire, benefit from non-insulated pure copper wire.

Aluminum Alloy Construction

Constructed from solid aluminum alloy, this wire stripper can withstand rigorous environment and last for years. Driven by 1/4 HP motor.

High-Powered Engine

With single phase 1/4HP 110V 60HZ, power 180W, it's stripping speed is approx. 60 feet per minute, time and energy saving. Big fun for fast heat releasing.

Sharp Blades

Made of high strength special alloy. Great grinding workmanship, easy to cut the protective cover of wire. Last much longer service time than high speed steel.Outer Diameter: 65mm(2.56");Inner Diameter:29mm(1.14") -35mm(1.38");Thickness: 15mm(0.59")

Wide Compatibility

Adjustable blades and rollers on the cable wire stripping machine fit with all sizes’ wires with diameters from 0.06" (1.5mm) up to 0.98" (25mm). Different sized feed holes are suitable for most of wires.

Portable & Convenient

Designed with drill driven technologies, this electric wire stripping machine is easy to operate. Measured at 9.4" x 12.6" x 12.6" and weighing 28 lb.

Heavy-duty Gearbox

Heavy-duty gearbox leads to fast stripping speed, fixed machine position, safe and reliable use.

Specifications

• Wire Gauge Range: Φ 1.5mm-Φ25 mm (0.05"-0.98")
• Stripping Speed: 60ft/min
• Voltage: 110V 50-60Hz
• Power: 1/4 HP / 180W
• Phase: Single Phase
• Motor: Induction Motor
• Overall Dimensions:240*320*320mm

Product description

Automatic Electric Wire Stripping Machine w/ Wire Gauge Range: 0.06"-1" (1.5mm~25mm)

The automatic electric wire stripper is designed for stripping scrap copper wires. It's portable and energy saving, can be operated by starting a drill. Two feeding panels of four different sized feed holes and two blades allow your various needs. Gauge Range: 1.5 mm-25 mm, Stripping Speed: About 60ft/min, high performance guaranteed. 

Power Motor

180W motor, single phase 1/4HP, 110V 60HZ. Made of durable aluminum alloy. Weight: 13.5kg( 29.77lbs).

High Performance

Has different sized feed holes for wires in diameter range 0.06"-1" (1.5mm~25mm).

Adjustable Regulating Nut

To meet your work need, the distance between the blade and shaft can be changed by adjusting the regulating nut.

Replaceable Blades

Two blades are included in the package. Outer Diameter is 49.5mm(1.95"), Inner Diameter 21mm(0.83")-26mm(1") and Thickness: 12mm(0.47").

Heavy Duty Design

Easy to use. Heavy-duty gearbox, fast stripping speed.

Widely Used

Remove the plastic and rubber insulation from undamaged scrap wire, and widely used in wiring harness processing, wire recycling dismantling, and other industries.

Specifications

• Wire Gauge Range: 0.06"-1" (1.5mm~25mm)
• Stripping Speed: 60ft/min
• Voltage: 110V 50-60Hz
• Power: 1/4 HP / 180W
• Phase: Single Phase
• Motor: Induction Motor
• Blade Outer Diameter: 49.5mm(1.95")
• Blade Inner Diameter: 21mm(0.83")-26mm(1")
• Blade Thickness: 12mm(0.47")
• Material: Aluminum Alloy
• Size(LXWXH): 36X31X37cm(14.18"X12.21"X14.57")
• Weight: 13.5kg( 29.77lbs)

Package Content

• 1 x Electric Wire Stripping Machine
• 1 x Replaceable Blade
• 1 x Feeding Panel
• 1 x Wrench

• 【LIGHTWEIGHT DESIGN】- Our wire stripper has a 180W strong motor with single phase 1/4HP, 110V 60HZ. lightweight with 13.5kg( 29.77lbs) to be portable and easy to use. Soft start design.
• 【LARGE STRIPPING CAPACITY】- Our wire stripping tool has two feeding panels of four different sized feed holes, allowing wires in diameter from 0.06"(1.5mm) to 1" (25mm). The panel with 3 holes can be fixed accordingly, 4 mounting holes available.
• 【BLADE ADJUSTABLE】- Two blades with Thickness: 12mm(0.47") can be fast to change and Stripping Speed: About 60ft/min well performed. Blade Outer Diameter is 49.5mm(1.95") and Inner Diameter: 21mm(0.83")-26mm(1"). Blades can be adjusted up and down by twisting the regulating nut for cables in different sizes.
• 【HEAVY DUTY GEARBOX】- The wire stripper attaches a heavy-duty gearbox leading to fast stripping speed, fixed machine position, a reliable choice for you.
• 【VARIOUS APPLICATIONS】- The electrical wire stripper machine is widely used in wiring harness processing, aerospace wire processing, audio and data line processing, wire recycling dismantling and other industries.

Product description

Efficient, precise cable peeling machine made to last with capacity of peeling about 18 AWG - 1" OD wires. It’s common knowledge for anyone who has tried a standard peeling machine that much time and energy can be wasted by adjusting blades up and down repeatedly. However this machine will definitely save your time.

This wire stripper owns 11 channels for you to peel your wires. Top spring loaded mechanism allows tension adjustment of the cutters depending on wire or jacket size you are cutting, such design also prolongs blade life.

The cable stripper is motor and gear driven, cutting speed is about 75 ft per minute.

Notes

Advantages over single strip channel machine--this model owns 10 cutting channels, which means 10 blades! They can suit different sizes of cables separately so blades will not wear quickly.

Will not need to adjust all the time to suit different cables, which need a lot trial-errors, multi-channel type peeler is the best choice!

Feature

10-blade wire stripping machine

Cutting speed up to 75 ft per minute

Capacity of peeling about 18 AWG - 1" OD wires

Motor and gear driven function

Top spring loaded mechanism allows tension adjustment

Specifications

Power supply: 110V, 60 Hz, 0.37 Kw, 1/2 HP

Wire Range: 18 AWG - 1" OD

Channel of Cutters: 10

Cutting Blades: 10

Cutting Speed: Approximately 75ft per minute

Gross Weight: 97.9 lb (44.4 kg)

Package Dimensions (L x W x H): 25.6" x 22" x 14.2" (65 x 56 x 36 cm)

Package Content

1 X 9-Channel Wire Stripping Machine

• STRIPPING RANGE - Cable wire stripping machine wire gauge range: 18 AWG - 1" OD;11 channels.10 cutting Blades. Sharp blades with stripping speed: 75 ft per minute
• POWERFUL MOTOR- Cable wire stripping machine 110V, 60 Hz, ,1/2 HP, power: 370W. Solid aluminum alloy, this wire stripper lasts for years and withstand rigorous environment
• STRIPPING RANGE - Cable wire stripping machine wire gauge range: 18 AWG - 1" OD;11 channels-10 cutting channels and 1 flat cable channel.10 cutting Blades. Sharp blades with stripping speed: 75 ft per minute
• SAFETY DESIGN- The blades and rollers rotate together at the same time by means of the gear so that the cable does not slip.Top spring loaded mechanism allows tension adjustment of the cutters depending on wire or jacket size you are cutting, such design also prolongs blade life
• TIME SAVING - The wire stripper will not need to adjust all the time to suit different cables, which need a lot trial-errors, multi-channel type peeler is the best choice

User questions & answers

Question:	What is the return policy
Answer:	How would I know
Question:	Hello , this machine comes with manual? Instructions? Or any piece of paper
Answer:	Hello. Yes the machine came with a manual.
Question:	Can this strip romex
Answer:	Yes there is a spot for romex. Do not try stopping the old 14-3 and 12-3 romex that is round. It's not worth it.
Question:	Will it strip 500mcm
Answer:	Yes

Product description

Manual Cable Wire Stripping Machine

This manual cable wire stripping machine is designed for stripping scrap copper wires. It's portable and energy saving, can be operated by winding the hand crank, or by starting a drill. Two feeding panels of four different sized feed holes and two blades allow your various needs. Wire Gauge Range: 1.5 mm-25 mm, Stripping Speed: About 50ft/min, high performance guaranteed. 

High Performance

Has different sized feed holes for wires in diameter range 0.06"-1" (1.5mm~25mm).

Adjustable Blades

To meed your work need, the distance between the blade and shaft can be changed by adjusting the regulating nut.

Replaceable Blades

Two blades are included in the package. Their Outer Diameter is 49.5mm(1.95"), Inner Diameter 21mm(0.83")-26mm(1") and Thickness: 12mm(0.47").

Handle & Drill Driven

You can start you stripping work with a hand crank, or a electril drill. Easy to use.

Durable Material

Made of durable aluminum alloy, gurantees a stable performence.

Widly Used

Remove the plastic and rubber insulation from undamaged scrap wire, and widely used in wiring harness processing, wire recycling dismantling, and other industries.

parameter

• Material: Aluminum Alloy
• Wire Gauge Range: 0.06"-1" (1.5mm~25mm)
• Stripping Speed: About 50ft/min
• Blade Outer Diameter: 49.5mm(1.95")
• Blade Inner Diameter: 21mm(0.83")-26mm(1")
• Blade Thickness: 12mm(0.47")
• Size(LXWXH):15X13X31cm(5.91"X5.12"X12.21")
• Weight: 3.8kg(8.38 lbs)

package includes:

• 1 x Wire Stripping Machine
• 1 x Replaceable Blade
• 1 x Feeding Panel
• 2 x Wrench
• 1 x Screw Set

• 【WIDE WIRE DIAMETER】- Our wire stripping machine has two feeding panels of four different sized feed holes, allowing wires in diameter from0.06"(1.5mm) to 1" (25mm). The panel with 3 holes can be fixed accordingly, 4 mounting holes available.
• 【BLADES ADJUSTABLE】- Two blades with Thickness: 12mm(0.47") can be fast to change and Stripping Speed: About 50ft/min well performed. The adjustable blades and rollers on the cable wire stripping machine fit with all size wires with diameters from 0.06” (1.5mm) up to 0.98” (25mm).
• 【HAND-CRANK DRIVEN】- The wire stripper can be driven by winding the hand crank, smooth and easy to use. Also you can start a electric drill to power it for a convenient and fast working.
• 【ALUMINUM & COMPACT】- This cable stripper has a compact and long lasting frame of aluminum alloy, lightweight with 3.8kg(8.38 lbs) to be portable and easy to use. It can be mounted easily to any bench or work station.
• 【WIDE APPLICATION】- The wire stripper machine is widely used in wiring harness processing, aerospace wire processing, audio and data line processing, wire recycling dismantling and other industries.

• SHARP BLADE & WIDE COMPATIBILITY - Made of high quality special alloy, the blade is sharper than others, easily and quickly cut the plastic or rubber insulation of undamaged scrap wire; By adjusting distance between blades and shaft according to the cable size, this VIVOHOME wire stripping machine is suitable for all size wires: diameter from 0.06” to 0.98”
• POWERFUL ENGINE & HEAVY DUTY GEARBOX - Comes with power 180W, single phase 1/4HP 110V 60HZ, the engine is high-powered; And combined with the heavy duty gearbox, this machine can strip at speed up to 50ft/15m per minute, efficiency and energy saving, maximizes its productivity
• STURDY CONSTRUCTION & PORTABLE DESIGN - Constructed with high quality and sturdy aluminum alloy, the wire stripper can last years to come and withstand rigorous environment; With overall dimension 9.4"x12.6"x12.6" and 13lb weight, the device portable to carry it when you want to work away from home
• EASY TO USE - The wire stripping machine is built up with 2 different sized feed holes, choose the compatible one to put in the wire according the diameter and press the green button, then it starts removing the cover of undamaged scrap wire, super labor saving, simple to operate
• WIDE APPLICATIONS - Easily mounts to a bench, table or work Station; Can be widely used in automotive wiring harness processing, aerospace wire processing, audio and data line processing, wire recycling dismantling and other industries

User questions & answers

Question:	Is there a user manual for this product? There was no manual provided in the packaging
Answer:	Dear customer, Would you please contact us via Amazon's direct message with order ID? We'll send you the manual there. Sorry for the inconvenience. Best, VIVOHOME Customer Care
Question:	How can I order replacement cutting blades
Answer:	Dear Valued Customer, Thank you for choosing VIVOHOME products. As for your question, we wonder if there's something wrong with the item. To solve your issue, would you mind contacting us with your Amazon order ID via Amazon's direct messaging service? We will provide you with a satisfaction-guaranteed solution within 24 hours. Best wishes, VIVOHOME Customer Care

Product features

VIVOHOME Auto Motorized Wire Stripper

VIVOHOME powered electric wire stripping machine can be widely used in big electrical projects. It can remove easily and quickly the plastic or rubber insulation of undamaged scrap wire, very useful to recycle surplus wire pieces for soldering, repairs and other projects. Having 2 different sized holes and with adjusting distance between blades and shaft, this device is compatible with a wide range of wires.

More about The Product

Product Specification:

• Power: 180W
• Wire diameter range: 0.06” (1.5mm) up to 0.98” (25mm)
• Motor: 1/4 HP Single Phase Induction Motor, 110V 60Hz
• Stripping speed: up to 50ft per minute
• Overall dimensions: 9.4"x12.6"x12.6"
• Material: Aluminum alloy
• Package Include: 1 x powered electric wire stripping machine; 1 x feeding panel, 1 x pair of gloves, 1 x wrench, 1 x instruction

Safe Switch

Safety water resistant on/off switch for convenience and peace of mind. Blade stops running automatically when power cuts off.

Regulating Nut

Rotate the knob to adjust interval between blades and rollers, which allows most gauges of cable eligible for stripping.

Heavy Duty Gearbox

Heavy Duty gearbox greatly accelerates its peeling speed; With fixed position, it’s very safe and reliable to use

Product description

AN INEXPENSIVE HANDY TOOL FOR ANYONE WHO WANTS TO MAKE EXTRA CASH EASILY. -COMPACT DESIGN & LARGE STRIPPING RANGE With all aluminum frame, this machine weights only 2.9 lbs but able to strip wire/cable from Diameters of 0.12″ (3 mm) up to 0.78″ (20 mm). -SIMPLE TO USE, EASY TO REPLACE THE BLADE Replace the blade in less than 10 minutes. No skill required. -WE STAND BEHIND OUR PRODUCT Please contact us any time for any questions or concerns on our strippers.

• For Light Use Only!!! Stripping range: Diameters from 0.12″ (3mm) up to 0.78″ (20mm), best for larger wire.Can not strip smaller wires from say dishwasher, stoves, washing machines, and refrigerators!!!
• Buy now and earn 1 pc free blade.
• All aluminum frame.
• Weights only 2.9LBS. Light weight and portable.
• Strip only the plastic/rubber layer of the cable/wire. Won't strip telecommunication cable.

User questions & answers

Question:	Will it strip 350mcm and 500 mcm
Answer:	I’m not sure the sizes exactly
Question:	Where can i find replacement parts like the feed wheels? I looked for a web site none came up
Answer:	Contact the manufacturer, that's what I did And they were very helpful. This item is made in china. It take many weeks to get the parts.
Question:	Why in the customer's questions does it state it cannot do 350 mcm cable? it states the stripping range goes up to 0.78 in. and 400 mcm is 0.728 in
Answer:	You can but I would cut it down to a smaller length because of the weight
Question:	Will it strip 3/0 and
Answer:	Yes it dose

Product description

Scrap Wire Stripping Machine Model MWS-808PMO. US PATENT # US8839695B2 - CN Patent # ZL201030705094.5. SPECIFICATIONS: Power supply: 110V 50-60Hz, 0.75Kw, 1HP. Wire Range: 18 AWG - 1" OD. 9 Channels of Cutters, 9 Cutting Blades. Single Assembly of Cutter and Roller. Cuts top or Wires. Motor and Gear Driven Function. Cutting Speed: Approximately 75ft per minute. Strips Certain ROMEX Brand Cable or other NM Cables. DON'T WASTE TIME WITH THE OTHER WIRE STRIPPERS THAT YOU HAVE TO ADJUST EVERY TIME YOU CHANGE WIRE SIZES!!! THIS MACHINE AUTOMATICALLY ADJUSTS!!!! What separates this machine from the competition is the above statement. Anyone that has used a standard wire stripper knows that it takes a lot of time and man power to adjust the blade up and down and up and down. This machine saves you that time. Basically there is 1 set of cutters/rollers. The spring loaded mechanism on the top allows you to adjust the tension of the cutters depending on what wire or jacket size you are cutting- this prolongs the blade life. You can cut two wires at once if you want. It's rated to cut up to 1". We carry spare parts in stock for this machine, so if you need anything in the future, feel free to contact us. Spare blades are $5 per blade and there are 9 blades per machine. THESE PRICES ARE FOR THE LOWER 48 ONLY. PLEASE CONTACT FOR ALASKA & HAWAII SHIPPING PRICES. ROMEX is a registered trademark of Southwire Company. If you have any questions or need any advice let us know.

• BLUEROCK Tools Brand
• Wire Range 18AWG -1"OD
• 9 Channels of Cutters
• 9 Cutting Blades
• Cuts 75' Per Minute!

User questions & answers

Question:	Can it do 22awg to 1250 KCM
Answer:	It'll do 14 AWG as long as blade is properly centered. Not sure it would be worth your time to do anything smaller. And it'll do 750 kCM, haven't tried bigger
Question:	Accessories for this product
Answer:	Hello- Not exactly certain what the question is, but we stock in our Seattle warehouse and sell spare parts, spare blades, etc.. Let us know if you have any additional questions or concerns.
Question:	What about 1000 kcm
Answer:	This machine can cut up to 1" outside diameter. Please see our larger models WS-212 and WS260 to strip 1000 kcm wire.
Question:	Is there a maximum length of wire per feed cycle? I don't want to spend my day cutting up all the wire into short pieces
Answer:	No maximum length it’s food from one side cut open to the other side