12 best sunex socket wrenches drive socket sets

Product description

The Sunex 2695 1/2” Drive 12 Point Driveline Limited Clearance Socket Set includes metric sizes from 8mm to 16mm. They are designed to remove and install driveline bolts, torque converters, cylinder heads, and 4x4 transmission casings. Each socket has been forged from high grade Cr-Mo steel, designed with radius corners, and boldly laser marked. All of this ensures our sockets’ professional-level performance conveniently stored in one heavy duty storage case. Meets ANSI Standards.

• LIFETIME WARRANTY WITH SUNEXPRESS: Get in the express lane with the industry’s leading warranty program and exchange warranted products directly with Sunex.
• CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.
• RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
• CHAMFERED OPENING: Quickly aligns fastener to socket.
• DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification.
• HEAVY DUTY STORAGE CASE: Convenient impact socket transport and storage.
• MEETS ANSI STANDARDS: All sockets are rigorously tested, ensuring peak performance and durability.

User questions & answers

Question:	Do these really have a warranty? NO! (Rhetorical: see "Told You So"'s review below. Beware. Som1 respond so this shows up
Answer:	Correct. It does not contain a 25mm, 28mm or 29mm socket in either shallow or deep.
Question:	does it really have a locking pin
Answer:	I have not yet used them. Depending on how big the stones are they should work fine. You could remove the stone on the strap where the hook will met the clip if to big.
Question:	Would these sockets survive in the diesel and heavy equipment field
Answer:	I think it should work. The open space on the clips is good size.
Question:	Is this set missing the 25mm, 28mm, 29mm sockets
Answer:	I’m a 44 DDD and the 3X was comfortable for me!

Product description

Sunex 3580, 3/8 Inch Drive Master Impact Socket Set, 80 Pieces, SAE/Metric, 5/16 Inch - 3/4 Inch, 8mm to 19mm, Standard/Deep/Universal, Cr-Mo Steel, Radius Corner Design, Chamfered Opening, Dual Size Markings, Heavy Duty Storage Case, Meets ANSI Standards, Includes Star and Inverted Star Sockets, 4 Extensions, Universal Joint.

SET INCLUDES:

SAE:

Standard Sockets: 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”

Deep Sockets: 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”

Universal Sockets: 11/16”, 3/4”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”

METRIC:

(12) Standard Sockets: 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm

(12) Deep Sockets: 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm

(10) Universal Sockets: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm

OTHERS:

Inverted Star Sockets: E5, E6, E7, E8, E10, E11, E12, E14, E16

Star Sockets: T20, T25, T27, T30, T40, T45, T47, T50, T55

Universal Joint

• LIFETIME WARRANTY WITH SUNEXPRESS: Get in the express lane with the industry’s leading warranty program and exchange warranted products directly with Sunex.
• CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.
• RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
• CHAMFERED OPENING: Quickly aligns fastener to socket.
• DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification.
• HEAVY DUTY STORAGE CASE: Convenient impact socket transport and storage.
• MEETS ANSI STANDARDS: All sockets are rigorously tested, ensuring peak performance and durability.

User questions & answers

Question:	For those who purchased this item since February 2017, has the case been updated to black clasps and a pinned hinged as Sunex's other socket sets
Answer:	Mine arrived 10/4/2018. Clasps are black, the hinge is thin plastic.
Question:	The kit says internal star, is this correct or are they actually torx
Answer:	This kit contains torx. It's a great kit. Has all your swivel sockets, deep and shallow sockets and extensions. The socket sizes are etched as well as stamped. Wall thickness on sockets not too thick and fit tight spaces
Question:	Does it come with impact shank
Answer:	This set is well beyond an impact driver this is the set you get when you have the high torque 700 plus ft lbs on 3/8 or 1/2 in drive. Of course you can get a 1/4 hex shank and use these with an impact driver in just saying it's way overkill for the amount of torque a driver produces.
Question:	Where would i go to get replacement sockets. my kit came with 2 e14 and 2 1/2 swivel sockets. i’m missing the e12 and 7/16 swivel sockets
Answer:	You can order though Amazon

Product description

Forged from the finest chrome molybdenum alloy steel-the best choice for strength and durability. This set contains 48 SAE and METRIC-Piece. Sockets are laser etched and roll stamped for lasting size recognition. Set features a heavy duty blow molded storage case and is fully guaranteed. Set includes: 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 4mm, 4.5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm,13mm, 14mm, 15mm.

• LIFETIME WARRANTY WITH SUNEXPRESS: Get in the express lane with the industry’s leading warranty program and exchange warranted products directly with Sunex.
• CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.
• RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
• CHAMFERED OPENING: Quickly aligns fastener to socket.
• DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification.
• HEAVY DUTY STORAGE CASE: Convenient impact socket transport and storage.
• MEETS ANSI STANDARDS: All sockets are rigorously tested, ensuring peak performance and durability.

User questions & answers

Question:	What's the difference between sockets used for impacts and hand tools? Can impact sockets like these be used on handtools like a ratchet safely
Answer:	I use the Milwaukee with a hog ring, It's a real pain to use my craftsman chrome sockets, they are loose on the hammer but hard to get off. The Sunex seem to stay on firmly with very little slop and are easy to remove, not sure why that is, but they are much better, I never touch my craftsman stuff anymore because with the right extension you can use an impact for everything. These were worth every penny.
Question:	Description says 42 sockets, last picture shows 40 and also in the description it shows 42 but also 40.. Missing the 8mm in standard and deep well
Answer:	Hello,Thank you for contacting CPO!WARRANTYSunex WarrantySunex® Tools Inc. Warrants to its customers that the company's Sunex® Tools branded products are free from defects in workmanship and materials.Sunex® Tools Inc. will repair or replace its Sunex® Tools branded products which fail to give satisfactory service due to defect in workmanship or materials, based upon the Terms and Conditions of the Warranty plans attributed to that specific product.This Warranty does not cover damage to equipment or tools arising from alteration, abuse, misuse, damage and does not cover any repairs or replacement made by anyone other than Sunex® Tools or its Authorized Service Centers.Return equipment or tools to Sunex® Tools or an Authorized Sunex® Warranty Center, SHIPPING PREPAID. Be certain to include your name, address and contact information, proof of purchase date, and a description of the suspected defect.The foregoing obligation is Sunex® Tools' sole liability under this or any implied warranty and under no circumstances shall Sunex® Tools be liable for any incidental or consequential damages.If you have any questions or concerns please do not hesitate to contact us directly at 1-800-714-0918.Sincerely,CPO CommerceCustomer Care 1-800-714-0918
Question:	Are the walls as thick as other impact grade sockets or are these thin enough to be called "thin walled sockets
Answer:	I ordered the lock pin style but received ball spring style instead.
Question:	Do these work well with guns that use hog ring vs ball type? i have a makita that i love but it is horrible with regular craftsman sockets
Answer:	Yes. We have a fleet of 30 triaxle trucks that we have extended each frame ourselves to max legal length. So not only do they survive maintenence, they survive pounding of setting and removing rusty cross members, suspensions, etc. The only sunex socket I have broken was a 3/4 drive 1 and 5/16 used for truck lugs. After 4 years of using an adapter to 1 inch with snap on 1 inch anvil gun it finally cracked, which is insane considering those guys throw 1000+ ft lb torque. I just wish they made chrome sockets so I wouldn't have to buy from snap on because idk how they do it but they make a great product for cheap.

Product description

3/4-Inch Drive Impact Socket Set, Cr-V, 27-Piece with 2 pc extension bar 4" and 8", plus durable carrying case.

• Constructed from high quality Cr-V steel to ensure extra durability throughout multiple applications and ideal for large industrial trucks and farming tractors
• Each socket is coated with a black phosphate coating for resistance against dirt and grime
• Six point socket prevents rounding off to securely latch onto fasteners and aids in proper turning on stubborn fasteners without damage
• Set comes with blow molded case for easy organization and includes: 12 x SAE sockets (7/8", 15/16", 1", 1-1/8", 1-3/16", 1-5/16", 1-3/8", 1-7/16", 1-5/8", 1-3/4", 1-7/8", 2"); 10 x Metric sockets (22, 24, 27, 30, 32, 36, 38, 41, 46, 50mm); 2 x extension bar (4" and 8"); 1 x 18" sliding breaker bar; 1 x 18" ratchet handle

User questions & answers

Question:	Do u send me (2) 7/8 sockets
Answer:	It features a wide range of adjustability that will fit standard 1/4-inch to 3/4-inch and metric 7- 19mm nuts and bolt heads.When placed onto a fastener, the center pins retract and the outer pins surround the fastener.
Question:	Is the 12/16 socket size is a typo
Answer:	Box but not the tool states China
Question:	Can you use an impact wrench on these
Answer:	I received 1pc Universal Socket and a adapter for Power drills.
Question:	How many teeth are in the ratchet? In other words, how many clicks does it take to rotate one full circle
Answer:	It says not to use with air tools, so that should give you a clue. It can handle up to 100 ft lbs torque.

Product features

Great for Automotive Repair

Each piece is crafted with precisely machined chrome vanadium steel for excellent strength. Heat treated steel provides extra durability for high torque applications.

Complete Set

Automotive set comes with a wide range of sizes for multiple fasteners and includes accessories such as extension bars and hand ratchet.

Easy Storage

Comes with heavy duty blow molded case for convenient storage and quick transportation between jobs.

No More Rounding Off Corners

Our innovative 6 point flank drive holds onto fasteners and prevents any rounding off corners. This means your fasteners are protected and so are your sockets.

Long Lasting Durability

Black phosphate is a coating used on sockets to protect them from all the dirt, oil, and grease that could potentially break down the socket quality. Ours uses a premium black phosphate finish rather than a black oxide coating traditionally found on other sockets.

Easy to Identify

Stop wasting time and guessing which socket is which. Our laser etched markings on the sockets make it easy for you to spot the right one you need.

Product description

This Sunex 1/2 inch drive 26 piece metric impact socket set includes the most common sizes used for automotive repair. It includes 26 metric sockets. It is made of CR-MO alloy steel for long life. It is fully guaranteed and includes a heavy duty blow molded storage case. Set includes in metric mm: 10,11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32, 33, 34, 35, 36.

• LIFETIME WARRANTY WITH SUNEXPRESS: Get in the express lane with the industry’s leading warranty program and exchange warranted products directly with Sunex.
• CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.
• RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
• CHAMFERED OPENING: Quickly aligns fastener to socket.
• DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification.
• HEAVY DUTY STORAGE CASE: Convenient impact socket transport and storage.
• MEETS ANSI STANDARDS: All sockets are rigorously tested, ensuring peak performance and durability.

User questions & answers

Question:	Is this good to use manually
Answer:	Warranties are always handled by the manufacturer, who determines if it's a defect in workmanship or if the tool was abused.
Question:	Is this a shallow set
Answer:	Yes you can use them with a ratchet. They are just thicker and usually stronger then chrome sockets. There are some areas that a chrome socket or a thin wall socket is needed like some lug nuts but otherwise these are great for everyday use
Question:	how big is the case
Answer:	In their description they are missing the 8 and 9 mm standard and deep sockets.
Question:	How does the warranty work if you make the purchase here
Answer:	I wouldn't consider them any thinner than your common 1/4" drive impact sockets. However, I have not compared to others alike.

Product description

The Sunex 2568 1/2” Drive Master Impact Socket Set includes SAE sizes from 3/8” to 1-1/2” in standard and deep lengths. This set also includes 4 impact extension and a universal joint. Each socket has been forged from Cr-Mo alloy steel, designed with radius corners, made with chamfered openings, and marked by both laser etching and roll stamping to ensure permanent socket identification. All of this ensures our sockets’ professional-level performance--conveniently stored in one heavy duty storage case. Meets ANSI Standards.

• LIFETIME WARRANTY WITH SUNEXPRESS: Get in the express lane with the industry’s leading warranty program and exchange warranted products directly with Sunex.
• CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.
• RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
• CHAMFERED OPENING: Quickly aligns fastener to socket.
• DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification.
• HEAVY DUTY STORAGE CASE: Convenient impact socket transport and storage.
• MEETS ANSI STANDARDS: All sockets are rigorously tested, ensuring peak performance and durability.

User questions & answers

Question:	Why are the extension for metric only $7 more but the extensions with SAE are $20 more
Answer:	1.5 feet x 1.5 feet approx.
Question:	Are these thin walled? Will need to use them to remove valves from manifolds
Answer:	Seem to be very strong sockets, I don't think you could ever break one if used manually. I use them manually and with an air wrench, highly recommend. Great set.
Question:	Where do I find the serial number for warranty info
Answer:	Yes it is the shallow set.
Question:	What are the dimensions of the carrying case when closed
Answer:	14.4 x 3.5 x 6.8 inches

Product description

Sunex's 1/2-inch drive head bolt socket set comes complete with 5 pieces. Their 4-inch length reaches past cam and rocker assemblies to service head bolts. Other features include head-bolt sockets for Nissan, Toyota, Honda, and Ford/GM trucks, a high-quality chrome-molybdenum composition, and flexible thin-profile sockets that can reach through access holes and past overhead camshafts. All Sunex impact sockets meet or exceed ASME specifications.

• 4-inch length reaches past cam and rocker assembly to service head bolts
• Includes head bolt sockets for Nissan, Toyota, Honda, and Ford/GM cars and trucks
• Forged from high quality chrome-molybdenum alloy steel for maximum durability
• Thin profile sockets will reach through the access hole and past overhead camshaft
• All Sunex impact sockets meet or exceed ASME specifications

User questions & answers

Question:	Are they 12 point
Answer:	Here you go: 10mm, 12mm, 13mm, 14mm, and 1/2". All 1/2" drive.
Question:	Are they 12 point
Answer:	The sets are identical other than standard or metric. I have both and they were priced significantly different.
Question:	Is there an advantage to using these over a regular 12-point socket with an extension
Answer:	No, these are thick wall impact.
Question:	What are the sizes in the set
Answer:	There is no serial number. These have a lifetime warranty from Sunex.

Product description

Ideal for heavy duty and truck fleet metric applications. Sunex Tools impact sockets meet or exceed ANSI specifications. Forged from high quality CR-MO Alloy Steel. Radius corners on the hex and square drive for extended life and reduced wear on fasteners. Conveniently packaged in a heavy duty blow mold case.

• Ideal for heavy duty and truck fleet metric applications
• Sunex tools impact sockets meet or exceed ansi specifications
• Forged from high quality cr-mo alloy steel
• Radius corners on the hex and square drive for extended life and reduced wear on fasteners
• Conveniently packaged in a heavy duty blow mold case

User questions & answers

Question:	What specific sizes are in this set
Answer:	Yes, they are 12 point.
Question:	What sized sockets are in this set? It would sure be helpful if they would include that information in the ad
Answer:	Yes, I bought them for heavy truck u joint strap bolts.
Question:	What size are sockets in sunex set
Answer:	these are impact 12 point sockets. if your using impact grade 12 point and extension it would be pretty much the same thing. I personally like these. I use these often with a half inch impact no issues yet.

Product description

From trucks and tractors to heavy equipment and large machinery, big service and repair jobs need The 3/4-inch drive deep Impact Socket set. Made for use with impact wrenches, These premium chrome vanadium sockets deliver superior performance. Deep broach offers the length to reach over threaded shafts and into recesses. High-torque, 6-point design contacts and grips the stronger Flat sides of fastener head, not the weaker corners, to prevent stripping or round-off under extreme stress. Extra large, high-contrast size markings are permanently laser etched onto each socket, making size selection Quick and easy, even in low light. A durable black phosphate finish protects from rust and corrosion. Rugged case keeps everything organized for neat, efficient storage and makes it easy to carry to the job. Set includes: 8-piece 3/4-inch drive impact sockets (SAE): 1, 1-1/16, 1-1/8, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2 inch; complete with storage case

• Precisely machined, heat treated black chrome vanadium steel with a corrosion resistant black phosphate coating provides excellent durability and strength for high torque applications with impact rated wrenches
• High-contrast visibility permanent laser etched size markings are easy-to-read in low light for easy retrieval and identification
• Unique design grips flat sides of fasteners rather than the corners to offer security and prevent stripping and rounding off bolt corners
• Wide range of large socket sizes to fit multiple applications including eight common SAE socket sizes (1, 1-1/16, 1-1/8, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2 inch)
• Set comes neatly organized in blow mold case with handles to keep your sockets in place during transport

User questions & answers

Question:	Hello i would like to buy this product but i noticed that you have 2 different kind of cases and the one that i liked is the old case
Answer:	The case I received is red plastic. 17-3/4" x 6-1/4" x 2-5/8".
Question:	Length/depth of sockets
Answer:	3.5 inches
Question:	I need my tools! Why is it taking so long to get them
Answer:	Perhaps Coronavirus. ?????????
Question:	Can any impact sockets be used as regular sockets on a regular basis
Answer:	The short answer is yes, with some minor caveats. Depending on what you're wrenching on, an impact socket can be used in place of a normal socket when using a normal (non-impact) ratchet. A hand ratchet will connect and drive an impact socket just as it would with a normal socket.

Product features

Mechanic Necessity

Save money and time with our complete deep broach impact socket set. Instead of going to the store to purchase one socket, our complete set saves you trouble and provides you a set that you can use for multiple jobs that requires different sized sockets.

Dependable Strength

Our sockets are made from impact grade chrome vanadium steel, giving you the strength you need to loosen those tough fasteners.

Stay Organized

Comes with heavy duty blow molded case for safe keeping when not in use.

No More Rounding Off Corners

Our innovative 6 point flank drive holds onto fasteners and prevents any rounding off corners. This means your fasteners are protected and so are your sockets.

Long Lasting Durability

Black phosphate is a coating used on sockets to protect them from all the dirt, oil, and grease that could potentially break down the socket quality. Ours uses a premium black phosphate finish rather than a black oxide coating traditionally found on other sockets.

Easy to Identify

Stop wasting time and guessing which socket is which. Our laser etched markings on the sockets make it easy for you to spot the right one you need.

Product description

Sunex 5153DD, 1/2 inch drive Master impact socket set, double deep, 29-piece, SAE/metric, 7/16" - 1-1/4", 10mm-27mm, CR-MO steel, radius corner design, Dual size markings, heavy duty Storage case

From the Manufacturer

Our sockets are designed to extend the life of fasteners! All Sunex impact sockets feature a radius corner design, causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners, resulting in less wear on the fastener. All Sunex impact sockets are forged from the finest chrome molybdenum alloy steel ¿ the best choice for strength and durability. We have a wide range of drive sizes, styles, and specialty applications to fulfill most any need. Sunex impact sockets can be purchased individually or in sets.

• Lifetime with sunexpress: get in the Express lane with the industry’s leading program and exchange warranted products directly with Sunex.
• Double deep: Allows for better access over long studs.
• Flip Sockets: Two bonus deep flip sockets for quickly removing common lug nut sizes.
• Cr-mo steel: provides the strength and flexibility to handle high torque impact tools.
• Radius corner design: reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
• Chamfered Opening: quickly aligns fastener to socket.
• Dual size markings: laser etched and roll stamped markings to ensure permanent socket identification.

User questions & answers

Question:	Are the size markings stamped into the socket or are the just lazer etched
Answer:	They’re not a thin wall design per se, but they are well made out of chrome-moly, so they’ll be thinner than some cheaper options made of Cr-V. I’ve never had an issue with fitment, especially considering they are 1/2”. Note it does come with 19/21 and 3/4” / (forgetting the other standard size atm; mine are at work) flip sockets which are specifically designed for removing lug nuts and may be slightly thinner than the regulars.
Question:	included
Answer:	3/4 to 2-1/2
Question:	are they from china
Answer:	3/4" Dr. 19mm Deep Impact Socket 3/4" Dr. 20mm Deep Impact Socket 3/4" Dr. 21mm Deep Impact Socket 3/4" Dr. 22mm Deep Impact Socket 3/4" Dr. 23mm Deep Impact Socket 3/4" Dr. 24mm Deep Impact Socket 3/4" Dr. 25mm Deep Impact Socket 3/4" Dr. 26mm Deep Impact Socket 3/4" Dr. 27mm Deep Impact Socket 3/4" Dr. 28mm Deep Impact Socket 3/4" Dr. 29mm Deep Impact Socket 3/4" Dr. 30mm Deep Impact Socket 3/4" Drive 31mm Deep Impact Socket 3/4" Dr. 32mm Deep Impact Socket 3/4" Dr. 33mm Deep Impact Socket 3/4" Drive 34mm Deep Impact Socket 3/4" Dr. 35mm Deep Impact Socket 3/4" Dr. 36mm Deep Impact Socket 3/4" Dr. 38mm Deep Impact Socket 3/4" Dr. 40mm Deep Impact Socket 3/4" Dr. 41mm Deep Impact Socket 3/4" Dr. 42mm Deep Impact Socket 3/4" Dr. 43mm Deep Impact Socket 3/4" Dr. 44mm Deep Impact Socket 3/4" Dr. 46mm Deep Impact Socket 3/4" Dr. 50mm Deep Impact Socket
Question:	Are these sockets thin walled
Answer:	Individual item Item Description 419MD 3/4" Dr. 19mm Deep Impact Socket 420MD 3/4" Dr. 20mm Deep Impact Socket 421MD 3/4" Dr. 21mm Deep Impact Socket 422MD 3/4" Dr. 22mm Deep Impact Socket 423MD 3/4" Dr. 23mm Deep Impact Socket 424MD 3/4" Dr. 24mm Deep Impact Socket 425MD 3/4" Dr. 25mm Deep Impact Socket 426MD 3/4" Dr. 26mm Deep Impact Socket 427MD 3/4" Dr. 27mm Deep Impact Socket 428MD 3/4" Dr. 28mm Deep Impact Socket 429MD 3/4" Dr. 29mm Deep Impact Socket 430MD 3/4" Dr. 30mm Deep Impact Socket 431MD 3/4" Drive 31mm Deep Impact Socket 432MD 3/4" Dr. 32mm Deep Impact Socket 433MD 3/4" Dr. 33mm Deep Impact Socket 434MD 3/4" Drive 34mm Deep Impact Socket 435MD 3/4" Dr. 35mm Deep Impact Socket 436MD 3/4" Dr. 36mm Deep Impact Socket 438MD 3/4" Dr. 38mm Deep Impact Socket 440MD 3/4" Dr. 40mm Deep Impact Socket 441MD 3/4" Dr. 41mm Deep Impact Socket 442MD 3/4" Dr. 42mm Deep Impact Socket 443MD 3/4" Dr. 43mm Deep Impact Socket 444MD 3/4" Dr. 44mm Deep Impact Socket 446MD 3/4" Dr. 46mm Deep Impact Socket 450MD 3/4" Dr. 50mm Deep Impact Socket

Product description

This Sunex 3/4 inch drive 17 piece socket set includes the most common sizes and years of usage. It is made of CR-MO alloy steel for long life and fully guaranteed. Includes a heavy duty blow molded storage case. Set contains 10 SAE sockets and 10 metric sockets: 1/4", 9/32", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 6mm, 7mm, 8mm, 10mm, 12mm, 14mm, 15mm, 17mm, 18mm, 19mm.

From the Manufacturer

This Sunex 1/2 inch drive master 20 piece Metric and SAE impact hex driver set includes the most common sizes used for automotive repair. It includes 10 SAE sockets and 10 metric sockets. It is made of CR-MO alloy steel for long life. It is fully guaranteed and includes a heavy duty blow molded storage case.

• LIFETIME WARRANTY WITH SUNEXPRESS: Get in the express lane with the industry’s leading warranty program and exchange warranted products directly with Sunex.
• CR-MO STEEL: Provides the strength and flexibility to handle high torque impact - tools.SOLID ONE PIECE
• CONSTRUCTION: Eliminates weak points and increases durability.
• DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent identification.
• HEAVY DUTY STORAGE CASE: Convenient impact transport and storage.
• MEETS ANSI STANDARDS: All hex drivers are rigorously tested, ensuring peak performance and durability.
• 20 PIECE SET

User questions & answers

Question:	If i purchase the used one, will it still come with the lifetime warranty
Answer:	Lifetime warranty
Question:	Product description says that these are sockets. Manufacturer says that these are hex head. What are you actually selling here
Answer:	The size indication for each socket would be laser etched.
Question:	manufacture description says 1/2 drive, product description says 3/4 drive witch is it
Answer:	Yes - a 15/16 deep impact socket is included 210MD 1/2" Dr. 10mm Deep Impact Socket 211MD 1/2" Dr. 11mm Deep Impact Socket 212MD 1/2" Dr. 12mm Deep Impact Socket 213MD 1/2" Dr. 13mm Deep Impact Socket 214D 1/2" Dr. 7/16" Deep Impact Socket 214MD 1/2" Dr. 14mm Deep Impact Socket 215MD 1/2" Dr. 15mm Deep Impact Socket 216D 1/2" Dr. 1/2" Deep Impact Socket 216MD 1/2" Dr. 16mm Deep Impact Socket 217MD 1/2" Dr. 17mm Deep Impact Socket 218D 1/2" Dr. 9/16" Deep Impact Socket 218MD 1/2" Dr. 18mm Deep Impact Socket 219MD 1/2" Dr. 19mm Deep Impact Socket 220D 1/2" Dr. 5/8" Deep Impact Socket 221MD 1/2" Dr. 21mm Deep Impact Socket 222D 1/2" Dr. 11/16" Deep Impact Socket 222MD 1/2" Dr. 22mm Deep Impact Socket 224D 1/2" Dr. 3/4" Deep Impact Socket 226D 1/2" Dr. 13/16" Deep Impact Socket 226MD 1/2" Dr. 26mm Deep Impact Socket 227MD 1/2" Dr. 27mm Deep Impact Socket 228D 1/2" Dr. 7/8" Deep Impact Socket 230D 1/2" Dr. 15/16" Deep Impact Socket 232D 1/2" Dr. 1" Deep Impact Socket 234D 1/2" Dr. 1-1/16" Deep Impact Socket 236D 1/2" Dr. 1-1/8" Deep Impact Socket 240D 1/2" Dr. 1-1/4" Deep Impact Socket 2701 1/2" Dr. 3/4" x 13/16" Deep Flip Socket 2704 1/2" Dr. 19mm x 21mm Deep Flip Socket
Question:	Do these have a warranty
Answer:	Mine were from Taiwan

Product description

This 3/8-Inch drive, 16-Piece SAE and METRIC set is forged from the finest Molybdenum alloy steel-the best choice for strength and durability. Features a radius corner design causing the socket to grab the sturdy wall, or flat, of the fastener instead of grabbing the corners. This results in less corner wear on the fastener. Set Includes SAE sizes: 1/4-Inch, 5/16-Inch, 3/8-Inch, 7/16-Inch, 1/2-Inch, 9/16-Inch, 5/8-Inch and 3/4-Inch and Metric sizes: 6mm, 7mm, 8mm, 10mm, 12mm, 14mm, 17mm, 19mm.

• LIFETIME WARRANTY WITH SUNEXPRESS: Get in the express lane with the industry’s leading warranty program and exchange warranted products directly with Sunex.
• CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.
• SOLID ONE PIECE CONSTRUCTION: Eliminates weak points and increases durability.
• LOW PROFILE DESIGN: Access tight spaces.
• DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent identification.
• HEAVY DUTY STORAGE CASE: Convenient transport and storage.
• MEETS ANSI STANDARDS: All hex drivers are rigorously tested, ensuring peak performance and durability.

User questions & answers

Question:	Straight or ball end
Answer:	http://www.amazon.com/Sunex-36488-8-Inch-Impact-Socket/dp/B002YKBWSI/ref=sr_1_6?ie=UTF8&qid=1460312656&sr=8-6&keywords=12mm+3%2F8+drive+hexThat is just an example of what you can find if you google or type into amazon : 12mm 3/8 drive hex.So go search and find yourself one you like.
Question:	Why doesn't have 13, 15 and 18 mm, and has twice 8mm(5/16), 19mm
Answer:	Yes.
Question:	what country are they made
Answer:	2637 are hex bits, Allen Wrench bits - they stick in a hex hole, and work with socket head screws/bolts. The picture is accurate. Sizes 1/4"-3/4" and 6mm - 19mm just as described.
Question:	i lost my 12 mm how can i get it
Answer:	The 1/2" drive is a 20 piece set, the 3/4" drive is a 17 piece set.