13 best capacitance meters

Product description

Capacitance Range 200pF ±2% 2000pF 20nF 200nF 2uF 20uF 200uF 2000uF 20mF Package Includes: 1 x capacitor meter 1 x probes 1 x user manual 1 x battery

• 100% Brand New, Tested before Shipping.
• With LCD Display Screen
• Removable Battery Powered(Included)
• Probe Included
• After Sale Service Available

User questions & answers

Question:	There are eight holes in two horizontal rows of 4 each underneath the LCD display. What are they for and how do you use them
Answer:	The previous model is a bit more difficult to clean. The Open-Access lid flips out for better cleaning access. I say get the newer one.
Question:	which of the 3 openings do you plug the cables as one answer states different than pictured above ? which is correct so I do not blow out meter
Answer:	But note that the instructions that come with this mug say, “DO NOT carry bottles containing liquid in bags to help prevent accidental opening.”
Question:	Which of the three unlabeled jacks should be used for the positive and negative connections? The instructions don't help
Answer:	The interior is a stainless metal.
Question:	How can I test an outside fan motor with this DMM? Where do the red/black cables go and what dial setting should I use
Answer:	It depends what you put in it. I put lemon water in mine and one of the seeds got caught in the mechanism of the cap. It did leak and wrecked an MP3 player that was in the bag. I now use a Zojirushi and it definitely doesn't leak

• 9 measuring ranges from 200pF to 20mF
• Features Data Hold and a Backlit LCD with large digits for visibility in dimly lit areas
• Protective rubber sleeve for drop protection; Built-in support stand for hand free use
• ZERO Adjustment for compensation of measuring
• Meets IEC safety standard 61010;Decent choice to troubleshoot household electrical problems

User questions & answers

Question:	Anybody checked (ceramic, mylar, electrolytic, tantalum) accuracy on a Fluke meter or better? If so, is this meter reasonably accurate - % variation
Answer:	I haven't try it. But I think it is washable. Leave the insulation inside while washing to prevent the washing rotor damaging the insulation.
Question:	how do you use the zero adjust
Answer:	The measurements are pretty accurate. It can hold a lot of items. I am extremely satisfied with the size and product.
Question:	Where can i get the owners manual
Answer:	I also live in FL., what I do is have some blue ice packs, put them in the bag in the morning they’ll stay cool 6 hours or more. I use three.
Question:	Can I test the caps on the board
Answer:	No the bag is flexible but well made and insulated.

Product features

Professional Capacitance Test Meter

The ELIKE 6013 capacitor tester combines ease of use with innovation, making it the perfect tool for any electrical project.

It can test spare capacitors before using them as replacements and it is good to diagnose a faulty circuit board if the fault was due to a faulty capacitor.

The meter is of compact structure and pocket size with rubber protection holster in case of dropping. Large integration provides high reliability and durability.

The hold function keeps the reading on the display.

A low-battery indicator signals when the meter's batteries need to be replaced.

The ‘1’ signals to remind to switch to a higher range.

Click the Button & Order the clamp meter today!

• WIDE RANGE of tests for Voltage, Current, Resistance, Continuity, Capacitance, Frequency; Tests Diodes Transistors, Temperature.
• PROFESSIONAL LEVEL features include Auto-Ranging capability, and True RMS for measuring both AC Current and Voltage
• EASE OF USE: Convenient features like Data Hold, Large LCD Backlit Screen, Auto Shut-off and Hanging Magnet, and Kickstand make taking and recording measurements easier than ever before
• IDEAL FOR COMMERCIAL settings where it can handle the demands of a long workday, from the durable exterior to the wide range of heavy-duty capabilities
• Built-in F400mA/600V and F10A/600V explosion-proof ceramic fuse tubes; Double Protection, more secure and reliable; The fuses can protect the multimeter effectively; Overload protection on all ranges. 3 Year Warranty provided by AstroAI. Note: Please take off the cap before using the test leads.

Product features

AstroAI 6000 Counts True RMS Digital Multimeter

The AstroAI True RMS Multimeter is designed to be safely and accurately used by professionals in a commercial setting or weekend DIYer's that need a little more power utility from their standard digital multimeter. It's easy and safe to operate with advanced features built for measuring seemingly everything. Run tests on diodes and transistors while being able to measure voltage, current, resistance, continuity, capacitance, and frequency, all on one device.

Troubleshoot Electrical Problems

AstroAI multimeter is professionally designed to troubleshoot electrical problems or just for electronics training.

Continuity Test

Connect the test leads to two points on the circuit being tested.

Intelligent Anti-burn and Double Protection

Built-in F400mA/600V and F10A/600V explosion-proof ceramic fuse tubes; Double Protection, more secure and reliable; The fuses can protect the multimeter effectively; Overload protection on all ranges.

Backlit LCD and Data Hold

Large digital display with backlit LCD for visibility in dimly light areas; It is often easier to use the data hold function to freeze the data being displayed on the digital display.

Multi-Function Socket

Use the multi-function socket to measure both Capacitors and Transistors.

Hanging Magnet and Kickstand

Hanging magnet and kickstand make taking and recording measurements easier than ever before.

Temperature Test

Carefully touch the end of the thermocouple to the object being measured; Wait for the temperature reading to settle, then record the result from the LCD display.

• Proster LCR Meter: inductance, capacitance and resistance measuring meter,it is a Specialdigital instrument which is easy to be operated, the reading accuracydegree is higher with liquid crystal display 3 1/2.
• High Accuracy : (Inductance) Measuring accuracy up to ±(2%+5); (Capacitance) Measuring accuracy up to ±(2%+5)Forward voltage drop of diode:Displaty forward voltage drop of diode;Forward voltage of DC:Approx.1mA;Reverse DC voltage:Approx.2.8V
• Rotable LCD Display : Multi angle adjustment for easy reading.There is no need to hold tester while measuring, more convenient operation.
• Multi-function: Auto power off; Data Hold function; Low Power Indication; ZERO ADJ for Capacitance.
• New Version Test Leads: Comes with crocodile clip/ Test Loads/ mini Alligator Clip; The black pen is connected to the negative pole and the red test lead is connected to the positive pole

User questions & answers

Question:	Seller,what are minimum measured values of capacitance-10pf?,inductance-100uh?,resistance-100ohm? put your answer here and in description near price
Answer:	Thanks for your asking. For Our Proster LCR Meter,it is a inductance, capacitance and resistance measuring meter, and a specialdigital instrument which is easy to be operated, the reading accuracydegree is higher with liquid crystal display 3 1/2. The minimum values for your measurement: the capacitance, 1.0pf; inductance, 1.0uh; resistance, 1.0ohm. All our products have full 18 months warranty, if there is any problem,we will try our best to help, please rest assured. Belle Proster Customer Service Team [email protected]
Question:	Can you check the inductance/capacitance of a component using test leads, not using the "flat" slots on the front of the meter, designated "LCR
Answer:	Thanks for your asking. For Our Proster LCR Meter,it is a inductance, capacitance and resistance measuring meter, and a specialdigital instrument which is easy to be operated, the reading accuracydegree is higher with liquid crystal display 3 1/2. All our products have full 18 months warranty, if there is any problem,we will try our best to help, please rest assured. Belle Proster Customer Service Team [email protected]
Question:	I need to measure down to 2uh, will this meter do that
Answer:	Lowest range on the BM4070 is 200 microhenries, with a resolution of 0.1 uH. However, accuracy degrades substantially at small inductance values. For example, my instrument reads 0.9 uH with zero test inductance (test lead length is 2 x 8 inches). With a 26 inch pair of test leads, this error increases to 2.3 uH. Thus, it's important to determine and subtract out the stray inductance of your test setup before trying to measure anything as small as 2 uH. Also, I have no precisely known inductances at values this small, so cannot say what the instrument calibration accuracy is in this range. If accuracy/precision are important, I'm afraid you're going to have to obtain a (much more expensive) lab-grade instrument, such as an inductance bridge, capable of measuring down to this level.
Question:	For l/c measurement, what frequency do this use? 100hz? 1khz? 10khz? or
Answer:	Thanks for your asking. For our Proster LCR Meter,it is a inductance, capacitance and resistance measuring meter, and a special digital instrument which is easy to be operated, the reading accuracydegree is higher with liquid crystal display 3 1/2. All our products have full 18 months warranty, if there is any problem,we will try our best to help, please rest assured. Belle Proster Customer Service Team [email protected]

Product features

Tips for not accurate measurement:

To measure small capacitance, different measurement principles and different measurement frequencies will lead to different measurement results.

The resistance component affects the accuracy, and the measurement results need to be subtracted from the data displayed before the measurement.

When measuring small inductors and capacitors, if the component feet are suitable, it is recommended not to use the test leads. Please just insert component feet directly into two rectangular jacks of LCR Meter to measure.

1 LCR meter, 1 pair of Crocodile Clip, 1 pair of Alligator, 1 pair of Test Probe, 1 Screwdriver, 1 9V Battery, 1 User Manual,1 Portable Bag

Inductance (L): 200uH-20H, up to accuracy: ± 2.5% (μH=10-6H; mH=10-3H);

Resistance (R): 200Ω-20MΩ, accuracy up to: ±0.8%;

Capacitance (C): 200pF-2000uF, accuracy up to: ± 2.5% (PF=10-12F;nF=10-9F;μF=10-6F;mF=10-3F);

Note: If you are measuring a patch component (SMD), the shorter the measurement line, the more accurate the measurement.

Inductance (L): 200uH - 20H

Range:200uH;Accuracy±(3%+5);Resolution:0.1uH

Range:2mH;Accuracy±(2%+5);Resolution:1uH

Range:20mH;Accuracy±(2%+5);Resolution:10uH

Range:200mH;Accuracy±(2%+5);Resolution:100uH

Range:2H;Accuracy:±(2%+5);Resolution:1mH

Range:20H;Accuracy±(5%+5);Resolution:10mH

Resistance (R): 200Ω - 200MΩ

Range:200Ω;Accuracy±(0.8%+2);Resolution:0.1Ω

Range:2KΩ;Accuracy±(0.8%+2);Resolution:1Ω

Range:20KΩ;Accuracy±(0.8%+2);Resolution:10Ω

Range:200KΩ;Accuracy±(0.8%+2);Resolution:100Ω

Range:200MΩ;Accuracy±(1.5%+5);Resolution:10KΩ

Capacitance (C): 200pF - 2uF

Range:200pF;Accuracy±(2.5%+5);Resolution:0.1pF

Range:2nF;Accuracy±(2.5%+5);Resolution:1pF

Range:20nF;Accuracy±(2.5%+5);Resolution:10pF

Range:200nF;Accuracy±(2.5%+5);Resolution:100pF

Range:2uF;Accuracy±(2.5%+5);Resolution:1nF

Range:20uF:Accuracy±(2.5%+5);Resolution:10nF

Range:200uF;Accuracy±(2.5%+5);Resolution:100nF

Range:2000uF;Accuracy±(5%+5);Resolution;1uF

Product description

Capacitance Range: 0.1pF +/-0.5%+5 820Hz 200pF 1pF +/-0.5%+5 820Hz 2000pF 10pF +/-0.5%+5 820Hz 20nF 100pF +/-0.5%+5 820Hz 200nF 1nF +/-0.5%+5 820Hz 2uF 10nF +/-0.5%+5 82Hz 20uF 100nF +/-0.5%+5 8.2Hz 200uF 1uF +/-2%+10 8.2Hz 2000uF 10uF +/-4%+10 8.2Hz 20mF 9 measuring ranges from 200pF to 20mF, LCD display with Black Light, Auto discharge for capacitors below 1000V, LSI-circuit provides high reliability and durability, ZERO adjustment for compensation of measuring, data-hold function, Over-range indication, Low battery indaction, Compact structure & pocket size, with protection holster.

FEATURES :

*1. 9 measuring ranges from 200pF to 20mF

*2. LCD display with Back Light

*3. LSI-sircuit provides high reliability and durability.

*4. With input overload protection

*5. ZERO adjustment for compensation of measuring leads

*6. Data-hold function

*7. Over-range indication

*8. Low battery indication

*9. Compact structure & pocket size

Package Contents :

*1 X 6013 capacitor meter

*2X probes with Original Factory Protective Styrofoam Package

• 9 measuring ranges from 200pF to 20mF
• LCD display with Back Light
• Auto discharge for capacitors below 1000V
• LSI-circuit provides high reliability and durability
• ZERO adjustment for compensation of measuring

User questions & answers

Question:	Please give numerical data to compare to the Fluke. How do you know that the Fluke gives a better reading
Answer:	Hello, Unfortunately, for now, we only have our lids sold with the Iron Flask package. We are working to have the straw lid sold separately in the near future. Different wide mouth bottles straw lid should fit the thread of the Iron Flask as well. Nonetheless, please email us your Order ID# and a picture of the lid and we'd be more than glad to make things right for you. Thank you for choosing the Iron Flask!
Question:	does this check a good or not good capacitor
Answer:	I ordered a 18 oz. bottle that was suppose to have straws and appropriate lid that holds straws. You sent me wrong bottle and I sent it back. They sent me another one and it was wrong again. Why can't you just mail me the right lid with straws. Susie Joyce
Question:	Is this actually an ESR meter for checking in circuit capacitors? Or just a capacitor farad measurement tool
Answer:	Hello, You can simply pull the o-ring to take off the stainless steel lid. Thank you!
Question:	I want a simple meter to check start and run motor capacitors. Will this unit let me know if the capacitor is good, blown, or whether I need a new cap
Answer:	Mine has leaked yes. It will leak slightly with the mouth/straw attachment on when held upside down. It will also leak if you undergo a pressure change. I was on an airplane flight and it leaked quite badly. I remedied this by flipping the straw to the open position so the pressure differential didn't cause an issue during flight. Overall I love this bottle I would recommend it over any other option!

Product description

BONUS: Add B07WQ21YMY to cart and enter code DWU9IJAQ, recieve 10pcs test leads with alligator clips for only 5.38.

Main functions:

AutoRange/Analog Bar Display/True RMS/NCV/Data hold/Back light/LED lamp/Diode test/Triode test/Continuity/Over load protection/Low Battery Indication/Auto Power Off/Short-circuit protection.

NCV:

Place the multimeter close to the AC voltage source (no wire is required) and the multimeter will display the voltage and give a corresponding prompt.

HTN full-viewing angle screen, 180 degree viewing angle. Has two LED backlights, Display is brighter than other sellers'. When the measured voltage exceeds 80V or current exceeds 1A, the white backlight will turn orange as a danger warning.

Wide range of applications: car repair, industrial circuit inspection, home circuit check.

Specification:

• Safety Level/Certification: IEC-61010-1 CATⅢ 1000V, CAT IV 600V, double insulation
• Display: True RMS, 6000 counts, 3 5/6 digits
• Overload Display: Display OL
• DC Voltage: 600mV/6V/60V/600V±(0.5%+3), 1000V ±(0.5%+3)
• AC Voltage: 600mV/6V/60V/600V/750V±(0.8%+5)
• DC Current: 600μA/6000μA/60mA/600mA/10A±(1.2%+3)
• AC Current: 600μA/6000μA/60mA/600mA/10A±(1.5%+3)
• Resistance: 600Ω/6KΩ/60KΩ/600KΩ/±(1.0%+3),6MΩ/60MΩ ±(1.5%+3)
• Capacitance: 10nf/100nf/1000nf/10uf/100uf/1000uf±(4.0%+5), 10MF/100MF±(5.0%+5)
• Frequency/Duty:10Hz/100Hz/1000Hz/10kHz/100kHz/1000kHz ±(1.0%+3),10MHz/±(3.0%+3)

Package Content:

1 x HT118A Multimeter

1 x Test Leads

2 x AA Battery

1 x User Manual

1x Thermocouple

• WIDE APPLICATIONS - KAIWEETS digital multimeter features 6000 counts auto-ranging for accurate measurement of AC/DC voltage, AC/DC current(DC is the default), resistance, continuity, frequency, capacitance and diode, liquid temperature, wire on-off, Battery checking. This advanced tester can diagnose automotive, industrial and household electrical issue.
• EASY OPERATION - Switch the dial and the LED lights on the jacks will shine accordingly. To plug in the leads is a real ease. Large 2.9” LCD backlight display. Dual Display with bar graph. Flashlight on the back ensures easy use in dimly lit places. Stable Kickstand, pen slot on the back.
• MULTI-FUNCTION - Non-contact voltage testing and Live function with sound and light alarm. The Sceen changes to red while detecting live wire. Low battery prompt, Data retention, Max/Min data, Auto Power-Off, Auto-Ranging.
• SAFETY FIRST - IEC Rated CAT III 1000V, CAT IV 600V, CE, RoHS certified. Anti-Burn with double ceramic fuse and thermistor protection circuit. High Voltage Protection is active on all ranges. Double insulated unit. Silicone protective case prevents it from falling damage
• AFTERSALES--Combined with Amazon's excellent delivery service, we provide 36-Month after sale service, lifetime technical support. Please feel free to contact us if you have any concerns.

User questions & answers

Question:	Will we be able to add a bluetooth upgrade to our meters since it indicates an updated meter will have it and it also has the symbol
Answer:	Yes
Question:	How long is the warranty
Answer:	No not good driving gloves
Question:	Just wondering if you ship this item to Australia
Answer:	I used these gloves and my hands did not get wet.
Question:	where can i buy replacement fuses? I love this meter but blew the fuse
Answer:	You can make a fist and I've used them for general cold weather yard work, but the gloves take away fine motor skills. Gripping a hammer would likely not be a problem. Holding a nail might be slightly more difficult.

Product features

Kaiweets HT118A Digital Multimeter

An advanced multimeter designed to be used safely and accurately by electricians at work places or homeowner and DIYer who need more capabilities than the standard measuring tool.

* Light up the terminals: LED indication light as input terminal guidance

* CAT III 1000V, CAT 600V safety rating

* Double insulation, robust outer case

* Includes test leads, K-Type thermocouple, batteries and user manual

Sensitive Continuity Test

Loud buzzing sound

Resistance < 30Ω, green light

Resistance between 30Ω to 60Ω, red light

2.7 inch Display

Display turns to orange when voltage is over 80V.

Large, clear digits

bar graph

Low battery indicator

Non-contact Voltage Detection

Non contact design for more safety. Just place the probe near outlets, sockets, terminals etc. to test voltage presence.

Maximum Safety

Dual fuse

Dual PTC thermistor

Intelligient Anti-Burn

Overload protection on all ranges.

Product description

1. 100 / 120 / 1k / 10k / 100k Hz test frequency

2. Dual 19999/1999 display

3. Backlight

4. Ls / Lp / Cs / Cp / Rs / Rp / dissipation factor (D) / quality factor (Q) /phase angle/ ESR LCR auto selection

5. Auto Ranging mode

6. Auto Serial / Parallel mode

7. Components sorting function

*Selectable tolerance ±0.25%, ±0.5%, ±1%, ±2%, ±5%, ±10%, ±20%, -20% +80%

8. Low battery indication

User questions & answers

Question:	Does this product reliably mesure small capacitances (<50pF) and small Inductances (<1uH
Answer:	I would suggest constructing a set of kelvin clips (there are many youtube links about this) for measuring capacitances and inductances this small.
Question:	Does it currently (as of today April 25 2018) come with power adapter too? or may be currently as a gift or something
Answer:	The power adapter is sold separately. I got mine on eBay. Just search DE5000 Adapter and it'll be there.
Question:	What is the lowest inductance range
Answer:	lowest range is 20.000 uH so it will measure down to 0.001 uH at 2.5% 100KHz
Question:	Does it test capacitors in circuit as well as out of circuit like the atlas esr70 does
Answer:	It can, but like any tester, it will be affected by connected components. ESR test is usually pretty reliable in-circuit as it sends 100kHz (or whatever frequency you pick from the selection) and the impedance of a good cap will be low - 1-2 ohms typically so parallel components should not show up. Capacitance may not be, depends as it will measure all capacitance in-circuit across the node (across the capacitor). Large electrolytics may test close enough, small caps probably not. The other tests, Q, leakage, etc are not in-circuit tests.

• True-RMS clamp meter: This multimeter can accurately measure AC/DC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household.
• LowZ & LPF: Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformer. To measure the current you need to clamp the meter around one of the wires and not the whole power cord.
• NCV Detection Function: Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires; The NCV button lies on the right side. Simply place your thumb on it and push.
• Multi-function: Two-color backlit LCD Display - When the voltage > 80V, the current > 3A, the LCD backlit screen turns red to warn you of high voltage/ LED Flashlight / Temperature Measurement for liquids and air conditioning ports included K-Type Thermocouple / Low Battery Indication / Auto power off after 15 minutes inactivity.
• Safety Service: Safety standard IEC 61010-1, CAT III 600V. Double insulation. 36 Months product service provided. 7/24 Customer Service.

User questions & answers

Question:	What are the concrete tips for automatic shutdown
Answer:	Step 1.) Run around in circles until u get too dizzy to continue or 15 min has passed, then it will auto shut off. 2.) There is no step two. If you have further questions or need more concrete tips, just continue repeating step 1 until it sinks in.
Question:	W/ backlite on I tilt the meter away from me the display is readable but once I tilt it towards myself the display becomes unreadable, is this normal
Answer:	Yes, with the baclklight on, it's viewable from straight-on to tilted away from yourself, but with the top tilted towards you it loses all contrast. Side-to-side viewing angle is a good. This is a common trait among some LCD displays.
Question:	I want to measure current flowing to my car starter when cranking engine. Does this clamp on meter measure DC current when using clamp
Answer:	Yes, It can read DC starting current with the clamp when set to DC measurement. Reading moves fast but I take video with mobile phone camera and rewind to see the 268A when starting a Nissan Frontier 2.5 L engine. Reasonable current though I cannot check its accuracy yet. I buy meter to monitor DC charging current and confirm non-running car leaking currents under 50mA but need to wait 20 minutes after engine off to let car computer stabilize from initial shutoff which can cab be as high as 0.6A. With this meter, I also find about 10mV leaking voltage on plastic surface between terminals at new battery (due to acid filling spill at manufacturing?) from club store which I need to reduce the Voltage drop to less than 0.1 mV by scribing several grooves on plastics surface around terminal posts. Calibrate to zero by holding Z/F button few seconds before measurement can help read accuracy. I am happy with this meter for the price. Hope you too if do not have time to find a better cheaper on
Question:	how accurate is th DC current measurment
Answer:	I have not checked it against a reference, but I have done some measurements on my car with this. It seemed to reflect a reasonable value when the battery charger was on, showing charging current. and It showed a big current for the started that was believable. When you first set it, you can press a zero button to zero it out. Then I looked at a really bad solar panel that could only put out about 50 milliamps when shorted, and it was able to show that pretty well. So the bottom line, if you are going to use this for debugging stuff, it seems pretty good. If you are going to measure calorie input to control a chemical reactions in a pharmaceutical lab, I can't say. For me, it is just cool that it can do a DC current in the first place. Has already come in handy as I was able to determine my alternator was not charging my battery quite easily.

Product features

To measure Direct Current

Specifications:

If current> 3A, the orange display lights up.

The measuring range of DC current is 60A/600A. Accuracy: ±(2.5%+5).

Note:

Before measuring the DC current, long-press and hold the Z/F key until the ZERO character appears to clear the data.

To measure Alternating Current

Specifications:

If current> 3A, the orange display lights up.

The measuring range of AC current is 60A/600A. Accuracy: ±(2.5%+5).

Note:

To measure the current you need to clamp the meter around one of the wires and not the whole power cord. The power cord contains two wires carrying current and ground wire. The current in two wires always flows in opposite directions, so the magnetic fields from two wires canceling each other, therefore the meter reads 0 A.

Grasp the individual current conductor to be measured and close the current clamp again. The measured conductor must be placed in the center of the clamp, otherwise, additional errors will occur.

Jaw Design

The Jaw is marked with maximum voltage and current measured value. Suitable for one-hand operation.

Weight & Size

Weight :260g. Size: 7.5 x 2.8 x1.3 inches.

Small and light, easy to carry when working.

Packing List

1 x Kaiweets Digital Clamp Meter 1 x Test Leads (Pair), 1 x Thermocouples(Pair), 2 x AAA batteries, 1 x User Manual, 1 x Carrying Bag

Z/F Button Measurement

Press the "Z/F" button to switch the respective secondary function between the different measurements such as between AC and DC.

Automatic Shutdown

No operation in 15 minutes, the clamp meter beeps 3 times. Without further operation, it beeps again and switches off automatically.

Multi-Function

Accurately measure resistance, capacitance, diode, continuity. Easy to use in laboratory factories and homes.

• 【Multi-Purpose Clamp Meter With True RMS Auto-Range】Accurate AC/DC voltage, AC current, frequency, duty cycle, diode, capacitance and resistance measurement
• 【With NCV&LIVE Line Test Function】Non-contact voltage detection function with a sensor to detect voltage and avoid electric shock without touching any wires. Light and sound alarm if detects the AC voltage(6-600V) or live wire
• 【Continuity Test & Over Load Protection】Designed to safely and accurately confirm the circuit conducts electricity with low voltage indication and overload protection. Shows "OL" on the LCD if over range
• 【Easy to Use and Read With Large LCD Screen】Small and portable to carry and use. High resolution and low battery indication. The flashlight access convenient AC current measurement in the dark. Data hold, auto range and auto power off
• 【You Will Get】Meterk Digital Clamp Meter, 1 Pair of Test Probe, 1 Temperature Probe, 3 AAA Batteries(Inside the Clamp meter), User Manual (English + French + German + Italy + Spanish), 1 Storage Bag

User questions & answers

Question:	Can it measures in rush
Answer:	EVIDENTLY some "people" answer, or try to answer questions that they have no fricking idea about what they are talking about.... YES, it DOES measure "inrush", or more correctly, SURGE current. I have found that due to its sensitivity you need to select the high- 600 amp range since it will sense the current spikes that are VERY, VERY short. (IF your are measuring a smaller current, ~2-4 amps, then the 60 amp range will work). ALL you have to do is press the "min/max" button.... IF the 60 amp range does not work at first, then the 600 amp range should be selected.. THIS IS THE REAL ANSWER...... (And NO, you do not have to keep your "eye on it") Scheesh........
Question:	just received order and unit does not show that it is true rms. should it be posted on the item
Answer:	Yes it should be labeled on the outside of the item where it is visible. If the description said it was true rms when placing your order, it should be. But if it's not labeled as true rms after you received order then only 2 things can be wrong. 1st they sent you the wrong item, or 2nd it was a factory erar that accured when the item was manufacturerd . Either or, id send it back and ask for the wright one
Question:	can i use the clamp on devise to measure the negetive battery cable to find if something is drawing my battery down
Answer:	No, this clamp meter is foe AC amps only. UNI-T 210E is one of many clamp metesr that can do DC amps and can be used for what you ask about.
Question:	How long is the warranty
Answer:	One year warranty.

Product features

AC/DC voltage

Non-contact voltage detection function with a sensor to detect voltage and avoid electric shock without touching any wires. Light and sound alarm if detects the AC voltage(6-600V) or live wire.

Battery Test

Accurate AC/DC voltage, AC current, frequency, duty cycle, diode, capacitance and resistance measurement

Resistance Test

It’s design is easy and safe to use with advanced features like True RMS and Auto-Ranging built right into the meter’s design. It can run tests on resistance.

Temperature Test

Carefully touch the end of the thermocouple to the object being measured; Wait for the temperature reading to settle, then record the result from the LCD display.

Continuity Test

• Connect the test leads to two points on the circuit being tested. （audible assurance).If the circuit does not work, “OL” will be displayed on the screen.
• Auto power off, the clamp multimeters will turn off automatically after 15 minutes without any actions. To turn it on.

Backlit LCD and Low Battery Indication

• Large digital display with backlit LCD for visibility in dimly light areas;
• Low voltage indication, you can quickly know to replace the battery and continue working.
• The flashlight access convenient AC current measurement in the dark

Automotive Maintenance

• Properly test fuses, wiring, and even your battery to ensure everything is in order for your next road trip.
• Wide range of applications, ideal for home and professional use, automotive, home and industrial electrical troubleshooting

• Versatile Digital Multimeter: Auto Ranging for accurate measurement of AC/DC voltage to 600V, Current to 10A, Resistance to 20MΩ, Capacitance to 2mF, Frequency to 2MHz. Tests Live Wire, Continuity and Diodes.
• Thoughtful Design: Support Data Hold, Max, Auto Shut-off, low battery indicator and continuity buzzer. Includes Convenient features like LCD Backlit Screen, Silicone Protective Case and Built-in kickstand make it easy to use. One 9V battery is included in the package.
• Wide Application：This Multimeter is designed to troubleshoot a variety of automotive and household electrical problems safely and accurately. It’s a suitable tool if you want to do some household or commercial improvements whether DIYers or Hobbyists.
• Ensures SAFETY: Double ceramic fuse is anti-burn and protects from overloading. The multimeter has passed environmental pollution degree 2 and overvoltage category III 600V safety standards. The silicone cover is able to protect the multimeter from failing damage and prevent electric shocks
• Pocket Size: Convenient size and weight make this multimeter ideal for DIYers, engineers and inspectors. The portable tester can easily be stored in a pocket. In addition, your purchase from AstroAI is covered by a three years warranty, please feel free to contact us when you have any problems.

Product features

AstroAI 2000 Counts TRMS Digital Multimeter

The AstroAI 2000 Counts TRMS Multimeter the perfect instrument to test & troubleshoot a variety of commercial and household electrical problems safely and accurately. Measurement functions have been updated to match various needs. AC / DC voltage separate test-gear, new millivolt test gear, new livewire-test function, and they also make the measurement clearer and more convenient. Apart from the above, the device can also measure AC /DC current, diodes and circuit continuity.

Voltage Test

Accurately measures DC/VC voltage and DC/VC millivolt.

Continuity Test

Connect test leads to the circuit, if it’s connected a buzzer will sound and the value will be displayed on the LCD screen.

Detects live wires

Live wire testing with the red test lead. This unique function tests the presence of live wires. When it detects a live wire, the multimeter will reflect with the audio alarm.

Backlit LCD and Data Hold

Backlit LCD ensures clear measuring in a dimly lit area. Hold function locks data for easy reading. It's convenient for you to record the data.

Capacitance measurement

You can test the capacitance to 2mF and get quick and accurate results.

Max Function

Press "MAX" button to get max data

Auto power off

Auto power-off after 15 minutes of inactivity to save power

Double Fuse

Double fuse overload protection, do not measure voltage exceeding 600V

• True-RMS Clamp Meter: This multimeter can accurately measure AC Current, 1000V AC/DC Voltage, Frequency, Duty Cycle, Resistance, Capacitance, Diode, Continuity and Temperature. DO NOT MEASURE DC CURRENT!
• Inrush Current Meter: Knowing the value of inrush current can help you locate a startup problem quickly, whether it's in the motor or in the starting circuit. The measuring time of inrush current is about 100ms.
• NCV Detection & LED Flashlight: Built-in Non-Contact Voltage (NCV) Detector can easily and quickly determine whether there is a voltage. Convenient LED flashlight illuminates a dimly lit area.
• Advanced Functions: The Clamp Meter has VFD, LOZ, MAX, MIN, REL, RAN, Date Hold, Low battery display and automatic shutdown. Multi-function clamp meter can satisfy all your needs
• Safety Service: Safety standard IEC 61010-1, CAT IV 600V, CAT III 1000V. Double insulation. Use high-quality material, prevent electric shock harm. 36-Month product service provided. 7/24 Customer Service.

User questions & answers

Question:	does it measure inrush current
Answer:	YES,it is very helpful to me.
Question:	Does this unit have a flash light and backlight
Answer:	YES,it can help you work well in the dark place
Question:	Is the hold feature peak or last reading
Answer:	The hold is the last reading
Question:	Can I get an accurate amp reading on kitchen appliances this meter
Answer:	To measure the current you need to clamp the meter around one of the wires, and not the whole power cord. If you just clamp around the appliance cord you will get a zero reading.

Product features

Multi-Function

Accurately measure resistance, capacitance, diode, continuity. Easy to use in laboratory factories and homes.

Inrush Function

Knowing the value of inrush current can help you locate a startup problem.

Hold Function

Freezes the display reading. Reading is released when button is pushed a second time.

Large Size

Size: 10×3.5×2 inches.

Large Size easy to operation.

How to measure inrush current

• WIDE APPLICATIONS-- The HT112B multimeter can accurately measure voltage, resistance, continuity, current, capacitance, frequency, diodes and batteries. This digital multimeter is very suitable for diagnosing automotive, industrial and household electrical problems.
• SMART MODE-- Default to enter this function directly when opening this multimeter. The SMART mode includes the three most commonly used functions: Voltage, Resistance and Continuity testing. This multimeter can automatically identify the measurement content in this mode, you don’t need to do anything extra.
• EASY OPERATION-- The slim multimeter with a large LCD backlit screen and the minimalist button design allows you to easily switch all functions with one hand. Convenient features like Data Hold, Auto Shut-off, Anti Miss Plug make taking and recording measurements easier than ever before.
• SAFETY FIRST-- This multimeter is CE & RoHS Certificated Product and it has overload protection on all ranges. The rubber sleeve on the outside of the multimeter provides additional drop protection and withstand daily work wear.
• WHAT YOU GET-- 1 x HT112B digital multimeter, 1 x KAIWEETS tool bag, 1 x test lead(non-standard lead connectors), 4 x button batteries(2 for immediate use, 2 for backup), 1 x manual. Combined with Amazon's excellent delivery service, we provide 36-Month after sale service, lifetime technical support. Please feel free to contact us if you have any concerns.

User questions & answers

Question:	Is there a warranty available
Answer:	Yes, we provide 36-Month after sale service, lifetime technical support.
Question:	Is the smart function really easy to use? is the function switching fast
Answer:	Oh.. I really love this smart automatic recognition function! It can quickly identify what you want to test. The most important thing is that it is really accurate! Love it!
Question:	is there an accessory leads kit available for the 112B
Answer:	Hi friend, Thank you for your question. We provide two test leads, there are currently no additional accessories. Please contact us if you have any question when using it. Sincerely, KAIWEETS supprot
Question:	What is the size of this multimeter
Answer:	I just got mine. It is a bit smaller than my iPhone 7 and it can be carried in the pocket easily.It looks pretty cool. LOL

Product features

HT112B Digital Multimeter

An ultra-portable multimeter with a nice look and large modern display. Very suitable for carrying with car, camping or DIYer and homeowner.

* CAT III 600V safety standard

* Double insulation, robust outer case

* Safety prompt: with fuse blown prompt, low battery power prompt and error jack prompt

Meet testing needs

Capacitance range: 6nF/60nF/600nF/6μF/

60μF/600μF/6mF/60mF

Sensitive Continuity Test

Resistance < 50Ω, green light, loud buzzing sound.

Non-contact Voltage Detection

Design for more safety. Just place the probe near outlets, sockets, terminals etc. to test voltage presence.

Friendly to amateurs

The screen will display "lead" to indicate that the test line is plugged into the wrong jack

AC Voltage Test

Accurately measures AC voltage up to 600V

Diode test

Accurate and fast diode test. Beep on a good diode

Fuse blown reminder

Fuse overload protection but please do not exceed 600V when measuring

Product description

Digital Capacitance Meter Features: Measures capacitors from .1pF to 20,000uF 3 1/2 Digit LCD readout with unit indicator Zero control for test lead compensation Banana jack and special insertion jack included Compact size with tilt stand Test Leads Included Operates on 9V battery (included).

• Measures capacitors from .1pF to 20,000uF
• 3 1/2 Digit LCD readout with unit indicator
• Zero control for test lead compensation
• Banana jack and special insertion jack included
• Compact size with tilt stand - Test Leads Included

User questions & answers

Question:	Does it read a cable per ft capacitance or total length
Answer:	28 volt system? Elaborate please
Question:	I have old capacitors from the 50s I want to know if it will test something that is like 1Mf @1000volts. Please someone answer this
Answer:	Ofc
Question:	can you use it to test capacitors in serie
Answer:	I'm not sure but it handles 2000 perfectly
Question:	What frequency does this meter use for testing? 100hz? 1khz? 10khz? Or
Answer:	That’s wiring if you u get it as a kit I think it’s CCA