13 best pry bars
Pry bars are versatile hand tools commonly used in construction, carpentry, automotive work, and various DIY projects. They are classified as hand tools and fall under the category of tools and home improvement. Here's what you need to know about pry bars:
Purpose: Pry bars are designed for tasks that involve levering, lifting, prying, or moving objects. They are used to separate or create gaps between objects, remove nails, open crates, and perform other tasks requiring force application.
Design: Pry bars typically have a long, flat metal shaft with a tapered or curved end. The opposite end often features a flattened chisel-like tip or a hooked end for different applications. The shaft can vary in length and thickness, depending on the specific tool and its intended use.
Materials: Pry bars are usually made of sturdy materials like high-carbon steel, stainless steel, or alloy steel to withstand the forces exerted during use. The choice of material can impact the tool's strength and durability.
Types: There are various types of pry bars designed for different purposes, including:
- Flat Pry Bars: These have a flat, tapered end for general prying and lifting tasks.
- Cats Paw Pry Bars: These have a curved end with a V-shaped notch for gripping and pulling nails and fasteners.
- Crowbars: These are larger, heavier-duty pry bars with a straight or slightly curved shaft, commonly used in demolition and construction.
Sizes: Pry bars come in various sizes, ranging from small, compact models suitable for tight spaces to longer, more substantial tools for heavier tasks.
Versatility: Pry bars are versatile tools that can be used in a wide range of applications. They are valuable in construction, carpentry, automotive repairs, and even for home improvement and furniture assembly.
Safety: When using pry bars, it's essential to follow safety precautions to prevent accidents. Users should wear appropriate protective gear and exercise caution to avoid damaging materials or injuring themselves.
Maintenance: Keeping pry bars clean and free from rust is essential for their longevity.After use, they should be wiped clean, and any dirt or debris should be removed from the tool's surface.
Pry bars are valuable tools for both professionals and DIY enthusiasts, offering the necessary leverage and force to tackle a variety of tasks. They are commonly found in toolboxes and workshops and play a crucial role in the tools and home improvement category.
Below you can find our editor's choice of the best pry bars on the market
TEKTON Angled Tip Handled Pry Bar Set with Striking Caps, 3-Piece (12, 17, 25-Inch) | LSQ42103
Product description
Set Includes:
- 12-inch angled tip handled pry bar with striking cap
- 17-inch angled tip handled pry bar with striking cap
- 25-Inch angled tip handled pry bar with striking cap
- Angled tip creates a high-leverage fulcrum for prying or lifting
- Sharpened chisel end wedges into tight spaces
- Generously sized textured poly handle offers a comfortable, nonslip grip
- Steel striking cap allows pry bar tip to be driven into place with a hammer
- Made from stout 3/8 inch square bar stock that won't easily flex or twist
User questions & answers
| Question: | Does the 3 bar set come with a tray |
| Answer: | Almost 5 inches for the 2 shorter and alimost 7 inches for the long one |
| Question: | What is the length of the handles |
| Answer: | More than you can create with your own body. I pryed on 1,500 pound MOGAS valves with it. |
| Question: | how many pounds can this lift without bending or breaking |
| Answer: | These pry bars are made in the United States. |
| Question: | Where are these made |
| Answer: | The product dimensions are 46.3L x 26.38W x 29.5H in. The total weight is about 18 lbs so about 9 lbs for each bar. |
Product features
TEKTON Angled Tip Handled Pry Bar Set Striking Caps, 3-Piece (12, 17, 25-Inch)
Exceptionally strong and reliable, these classic square-stock bars, with a steel-capped handle for hammer striking and a high-leverage angled tip, are indispensable essentials in the garage, shop, or out on the road.
Angled Tip
In addition to creating a high‐leverage fulcrum for prying, the angled tip also provides a pivot point around which to lift and position heavy objects like machinery or tables with fine control.
Comfortable Handle
The generously sized textured handle provides a sure, nonslip grip that lets you comfortably and confidently apply as much force as needed. Made of impact‐resistant polypropylene, it's extremely durable and unaffected by fuels, oils, cleaners, solvents, and most other common chemicals.
Steel Striking Cap
A large, 1 inch diameter solid steel cap on the end of the handle is designed for hammer striking, allowing you to drive the tip into the tightest of spaces. Inserted deeply into the handle, the cap fully contacts the end of the bar, so the force of each hammer blow is transferred directly to the bar itself.
Strong and Reliable Construction
Forged on stout square stock, this high‐strength bar won't easily flex or twist under load so it's able to deliver consistent leverage. A black oxide finish resists corrosion and won't flake or chip off like painted, powder coated, or chrome plated finishes.
TEKTON 3318 15-Inch Utility Pry Bar
TEKTON
Product description
Whether it's roofing or framing, demolition or trim, the TEKTON 15 in. Utility Pry Bar is the versatile, all-purpose prying and nail-pulling workhorse you will want on every project. The broad flat end gives you extra reach and surface area, while the hooked rocker end delivers incredibly high leverage, even in tight spaces. Sharp, thin chisel tips slip effortlessly into the tightest cracks and crevices to pry apart old wall studs, loosen molding, free worn shingles, and lift damaged deck boards. Nail slots at each end and in the middle let you get at nails from multiple positions or angles. They slide under and grip all head styles of nails, brads, tacks and staples, even wire nails from air nailers, giving you the leverage to pull them cleanly. Made from high-strength forged and heat-treated steel, this tough guy will quickly become one of your most trusted tools in the box.
From the Manufacturer
Rugged Hardened and Tempered Steel, Durable, Baked Enamel Finish, Three Nail Slots: One in Center, One at Each End, Beveled, Sharpened Ends Slide into Tight Spots, Flat End for Heavy Duty Prying, Rocker Hook End for Extra Leverage and Use in Confined Areas.
- Versatile, all-purpose contoured bar with broad flat end and high-leverage rocker end
- Thin, sharpened chisel tips slide easily into the tightest cracks and crevices
- Three nail slots (one at each end, one in the middle) lets you get at nails from any angle
- High-strength forged and heat treated steel construction
- Durable enamel finish resists rust and corrosion
User questions & answers
| Question: | Is this strong enough to pop locked bathroom door |
| Answer: | Useful in tight spots, but I'd prefer a larger tool for most of the work. |
| Question: | is this good for removing kitchen cabinets |
| Answer: | 7-1/2" long, 15/16"wide, 1/8"thick and 1-1/2" offset at hook end. i hope this helps you . thomas b. |
| Question: | How wide is bar |
| Answer: | China with lifetime warranty |
| Question: | Where is it made |
| Answer: | This is Nate from Tekton. This set does not come with a tray. |
Product features
Multi-purpose
The TEKTON Flat Pry Bar is one useful tool that is a must have at your home. Well suited for trim and cabinetry, the contoured bar is extremely versatile as it helps in prying and pulling the nail.
Nail Slots
The three nail slots, one each on both ends and one in the middle, lets you get at nails from multiple positions or angles. They slide under and grip the small heads of finishing nails and brads, even those from air nailers, giving you the leverage to pull them cleanly.
Heavy Duty Construction
The heavy duty, high-strength forged and heat treated steel construction makes it impact resistant and makes it durable . The enamel finish resists rust and corrosion and and adds to the life.
Pry Bar Set, Heavy Duty Pry Bar 4-Piece Mechanic Hand Tools By REXBETI, Thicker Strike Cap Handle, Black Orange
- 4 piece pry bar set - 8" 12" 18" and 24"
- Comfortable and long handle with build-in strike cap allows pry bar to be hit with a hammer
- Hardened and tempered for strength and durability
- Blackened finish chrome vanadium steel shafts that won't easily flex
- Heavy duty design
User questions & answers
| Question: | What you can do with it |
| Answer: | I have only used a handful of times they seem good. If your going to use every day and pry on heavy stuff you may want the heavier duty one. |
| Question: | I work in industrial maintenance are these stiff enough not to flex under heavy prying? Will they hold up or do I need to buy the Dominators |
| Answer: | No it came in a plastic case that we threw away |
| Question: | Does it come in a molded case |
| Answer: | The diameter is 1/2". |
| Question: | what is the diameter of the bar |
| Answer: | Yes its strong to locked door |
Product features
4pc PRY BAR SET
Basically, The pry bars are a must have for any man no matter how often he repairs, demolishes or builds something. There is always some job, which must be done, and it’s great if proper instruments are at hand. This REXBETI 4-pc premium Pry Bar Set comes with 4 sizes - 8" 12" 18" and 24", which has a wide range of sizes to pry, lift, position and align machinery and parts. Each of them is of different size, allowing you to utilize them not only for jobs at home but also for repairing your automobile. The long shaft bars provide with additional leverage while working in narrow areas. Made of forged and tempered square steel, this 4 pieces pry bar set will going to help you with different jobs around the home, shop or out on the road.
SOFT & LONG HANDLE
Ergonomic rubbery handles make them easy to hold onto for extended projects and helps you keep control even better. Never worry about it will slipping from your hand
STRIKE CAP
The metal strike cap on the end allows striking hard without breaking the handles
PROTECTIVE CAP
You get 4 protective caps, 1 for each pry bar. They will keep the tips sharp for a long time and will also prevent any accidental scenarios
Titan 17007 3-Piece Stainless Steel Pry Bar Scraper Set
Titan
Product description
Titan Tools 3-piece pry bar and Scraper set includes 3 Pry bars with sharp Scraper ends. These bars are constructed from mirror polished stainless steel and are ideal for nail and tack pulling. Use them as Pry bars, scrapers, chisels or tack pullers. These do it all.
- Contains 3 sizes: 5-1/2", 7-1/4", 9-1/4"
- Stainless steel construction with mirror polished finish
- Sharp scraper edges
- Use as pry bars, scrapers, chisels or tack pullers
- Ideal for nail and tack pulling and scraping
User questions & answers
| Question: | hive tool |
| Answer: | The answer is ...... maybe/possibly, with the large bar in small increments over time. I would not try to use these on anything but wood projects. For a car door, I would use a old fashion'd big honkin' crowbar. |
| Question: | Can you pry open a locked car door with this |
| Answer: | Since the name of the company that supposedly manufactures this item is Star Asia, USA, llc,dab Titan I would bet that it is made in Asia, probably China or Taiwan. |
| Question: | Where is this product made |
| Answer: | They are made in Taiwan. They are super sturdy. Not sure what the other reviewer used them for. I am extremely happy with the results like most reviewers! |
| Question: | Are they made in the USA |
| Answer: | great for my garage! |
Mayhew 61366 Dominator Pry Bar Set, Curved, 5-Piece
Mayhew Tools
Product description
The Dominator line is the workhorse of the MayhewPro Series. This exclusive collection of professional-grade, capped end pry bars and specialty tools stands up to punishment just as easily as it dishes it out. The Dominator was designed to handle all the abuse you can give it and keep working. Heavy Duty construction with a hardened, tempered-steel shaft that runs from the cutting edge through the handle and a metal striking cap at the end delivers maximum power and durability for all your working needs. Available with a curved end for prying leverage, or a straight blade for additional striking force. The Dominator Pry Bar is the go to bar for auto mechanics, construction work, and any job where the quality of your tools is key. Mayhew is ISO 9001-2008 certified, and all of our punches, chisels, and pry bars meet the ASME B107.410-2008 standard. About Mayhew Quality hand tools built for the demands of top professionals. Welcome to Mayhew…celebrating over 150 years of quality manufacturing. In 1856, the founders of Mayhew dedicated themselves to the highest standards in American Manufacturing of punches and chisels. Headquartered in Turners Falls, MA the company has grown to encompass a much broader product line including pry bars, and specialty tools and operates several manufacturing facilities across the state. While the company has grown, quality is still our number one priority. Mayhew is ISO 9001-2008 certified, and all of our punches, chisels, and pry bars meet the ASME B107.410-2008 standard
- All bars have curved ends which provide greater prying leverage when working in tight areas; set includes: Dominator 8-C (8" oal), 12-C (12" oal), 17-C (17" oal), 25-C (25" oal), and 31-C (31" oal)
- Patented, two-composite, ergonomically designed handle provides a comfortable and secure grip and is oil, solvent, and temperature resistant
- Metal striking cap at the end of the handle is in direct contact with the shaft allowing the user to strike the tool without damaging the handle
- Black oxide finish for additional rust protection
- Made in the USA with a Lifetime Warranty
User questions & answers
| Question: | Do these bars flex when used? I’m thinking of throwing away all of my cheap bars because they flex when used |
| Answer: | I've warrantied Mayhew products at NAPA. If your NAPA guy is any good he wont have a problem with it. |
| Question: | What do you do for warranty service when they break |
| Answer: | Ours come in a Gray cheap plastic flimsy storage tray. Thanks, BW |
| Question: | I have sen two differant storage trays that comes with this, which one is correct |
| Answer: | length of rubber handle on the long bar is 6 15/16". I mounted my bars to the side of my box with a section of uni-strut. Spacing for handle width and bar fitment worked well. these are a premium bar you will be happy with |
| Question: | How long is the rubber handle part on the longer bars like the 31" ? Trying to see if it will fit in the side holes on my matco tool cart |
| Answer: | I've only known it as a hive tool. |
Product features
Professional grade. American made.
- Hardened, tempered-steel shaft runs from the cutting edge through the handle, delivering maximum durability and prying power.
- Capped end is forged through the handle and allows the user to strike the tool without damaging the handle.
- Full-shank heat treated for maximum strength.
- High impact polypropylene handle ergonomically designed to provide superior comfort and grip.
- Black oxide finish is applied for additional rust protection.
- Made in the USA.
Mayhew Tools is ISO 9001:2015 Certified. CIC Management, LLC. Certificate No. 17-1027. Issue Date: August 30, 2017.
CRAFTSMAN Pry Bar Set, 4 Piece (CMMT14107)
Product description
Built to withstand tough lifting, each pry bar in this CRAFTSMAN pry bar set can assist you with prying and moving objects. Hardened and tempered for maximum strength.
- Pry bar lengths include 8-inch, 12-inch, 16-Inch and 18-inch
- Beveled leading edge allows access to the tightest work places
- Prying
- Full Lifetime Warranty, refer to "Warranty & Support" section below for full details
User questions & answers
| Question: | Does it have a steel strike cap on the handle |
| Answer: | These quality pry bars do flex when in use which is a strength. Flexing is an important quality of the material because cheap brittle materials that don't flex tend to break earlier and under lesser stresses |
Dasco Pro 91 Pry Bar Set, 3-Piece
DASCO
Product description
The Dasco Pro 3-Piece Pry Bar Set is suited to a wide variety of prying and scraping applications. This three piece bar kit includes the most popular small bars for Do-it-Yourself and Pros alike. Use bars to pry trim and molding, scrape excess paint, open paint cans and pull nails. This set is made in USA and meets or exceeds ANSI standards.
- This product is easy to use
- This product is highly durable
- Include one 5.5" lil bar; one 7.5" ultra bar II
- Also includes one 9-inch trim/pry bar
User questions & answers
| Question: | made in usa |
| Answer: | Don't know; returned them since they were made wrong. Lowes sells these so you can measure there. If you are going to pull nails, the notch for the nail head has the chamfer on the wrong side on small and med bars. |
| Question: | What are the measurements on the large jimmy bar |
| Answer: | The flat glazier bar has some heat treating. Not incredibly strong. The other bars are useless to me. There is a CR Laurence flat bar for $12 that is significantly better |
| Question: | Are these heat treated or are they soft |
| Answer: | Mine say "Made in USA". |
| Question: | Is it made in china or the u.s.a.? according to the description, it is made in both |
| Answer: | The item does have a strike cap on the end. |
GEARWRENCH 33" Extendable Indexing Pry Bar - 82220
GEARWRENCH
Product description
For fast-moving jobsites or heavy-duty work, only an adjustable pry bar can handle the broad range of challenges professionals face. The GEARWRENCH expandable indexing pry bars have a rotating head with built-in grooves to grip in any environment and can extend to reach areas inaccessible to shorter tools.
From the Manufacturer
Danaher Tool Group Gear Wrench Extendable Indexible Pry Bar features six new styles in sizes ranging from 8inch to 33inch in length. It extends from 20 to 33 inch. This pry bar includes grooved foot for added traction. This head of the pry bar can be adjusted to 14 locking positions for unmatched access which is over 180 degrees of use and that allows more leverage in tight access applications as well as puts the pry bar where it is needed for best leverage. It exceeds ANSI requirements for proven strength and is great as a seal pick to remove engine as well as axle drive seals. This pry bar is backed by a lifetime warranty.
- Expandable and adjustable to reach areas inaccessible to a fixed head tool for improved access
- Head rotates 180° through 14 locking positions for unparalleled access and leverage
- Compact design allows for work in tight spaces
- Designed for demolition, repositioning equipment, industrial work, aligning steel components, or moving engines
- Grooved head profile grips and holds securely, even in tight confines and at the fullest extension
- Exceeds ASME and ANSI requirements for proven strength, making it the perfect tool for heavy-duty automotive or industrial work
- Features six new styles in sizes ranging from 8inch to 33inch in length
User questions & answers
| Question: | Is the warranty through amazon or gearwrench |
| Answer: | GearWrench tools are guaranteed for life. Most tools are... http://www.gearwrench.com/warranty |
| Question: | What's the warranty |
| Answer: | I find the bar extremely useful, but I use it for positioning equipment and testing bearings. For solid core steal doors I would imagine it would help a lot. If using for a carpentry application, maybe the next size down would be more useful. |
| Question: | Would this be a useful shtf tool for a gear bag? is it useful on solid core and hollow interior home doors via dynamic entry or is another pry better |
| Answer: | The size of the bar. 82220 goes up to 29 Inches. 82248 Goes to 48 Inches. |
| Question: | What is the difference between the two part numbers |
| Answer: | Yep. Made in USA. Zoom in on the Amazon.com image and you can see that each one says "Made in USA". All three of mine say "DASCO PRO" & "Made in U.S.A." |
Product features
GEARWRENCH Pry Bars
From aligning & rolling head pry bars to our innovative indexing and extendable indexing pry bars, GEARWRENCH offers a wide variety of pry bars for almost every application. They are ideal for engine re-positioning and placement, aligning steel components, and re-positioning equipment. Available in sets and individually, these pry bars can handle just about any prying or aligning application.
Speed
Push button indexing head allows you to easily change the head position, maximizing the leverage point to get the job done.
Strength
All pry bars are designed to meet or exceed ASME specifications.
Access
Head indexible through 180 degree, with 14 locking positions for unmatched access.
GEARWRENCH Angled Tip Pry Bars
The acetate handle pry bars have a fixed angled tip for access and leverage and a special formulation handle that gives greater resistance to cold temperatures and to drops. The shaft is coated in black phosphate which reduces corrosion and rust. Ideal for medium-duty automotive and industrial applications.
GEARWRENCH 3 Pc. Indexing Pry Bar Set 8", 10" & 16" - 82301D
GEARWRENCH
Product description
3 Pc. Indexing Pry Bar Set 8", 10" & 16"
From the Manufacturer
Gear wrench 3-Piece pry bar set consisting of: 82208 8-Inch Indexing pry bar - smooth profile, 82210 10-Inch indexing pry bar - smooth profile, and 82216 16-Inch indexing pry bar - smooth profile. Gear wrench pry bars are indexable to 180 degrees for greater leverage with 14 locking positions for unmatch access. Long handle allows you to put the bar where you need it for best leverage. Industrial steel construction exceeds ANSI requirements for providen strength.
- Able to reach areas inaccessible to a fixed head tool for improved access
- Heads rotate 180° through 14 locking positions for unparalleled access and leverage
- Compact design allows for work in tight spaces
- Smooth head profile fits into low access areas, making quick work of pry jobs in cramped areas
- Designed for demolition, repositioning equipment, industrial work, aligning steel components, or moving engines
User questions & answers
| Question: | Can they withstand the torques and pressures a standard prybar can? Being ratchetable makes me thinks otherwise. Input please |
| Answer: | It does not come with a case.Thank You |
| Question: | Case too to put into toolbox included |
| Answer: | I reckon they would do the job. The largest is approximately 15 mm wide and range down from there . Hope this is of some assistance . |
| Question: | What are the head measurement? Curious if these will work well for removing a bearing rase from a gear box |
| Answer: | not sure, eaither way not totally impressed by these, I should have gotten a craftsman set |
| Question: | Wear manufatured |
| Answer: | It's through Gearwrench. You can take it to anyone that sells it (Northern Tool for example) and they can warranty it. You could send it in yourself if you want, but I've never done that. |
Product features
GEARWRENCH Pry Bars
From aligning & rolling head pry bars to our innovative indexing and extendable indexing pry bars, GEARWRENCH offers a wide variety of pry bars for almost every application. They are ideal for engine re-positioning and placement, aligning steel components, and re-positioning equipment. Available in sets and individually, these pry bars can handle just about any prying or aligning application.
Speed
Push button indexing head allows you to easily change the head position, maximizing the leverage point to get the job done.
Strength
All pry bars are designed to meet or exceed ASME specifications.
Access
Head indexible through 180 degree, with 14 locking positions for unmatched access.
GEARWRENCH Angled Tip Pry Bars
The acetate handle pry bars have a fixed angled tip for access and leverage and a special formulation handle that gives greater resistance to cold temperatures and to drops. The shaft is coated in black phosphate which reduces corrosion and rust. Ideal for medium-duty automotive and industrial applications.
Estwing Handy Bar Nail Puller - 21" Pry Bar with Wide, Thin Blade & Forged Steel Construction - HB-21
Estwing
Product description
Estwing's 21" Handy Bar is forged half round, for added strength and less weight. Wide, thin blade for easy prying.
From the Manufacturer
Estwing Bars are the perfect tool for construction and renovation! There are endless uses for Estwing's Handy Bar. These bars are forged, half round, for added strength and less weight. Wide, thin blade for easy prying. The Handy Bar comes in 15-Inch and 21-Inch lengths.
- FORGED IN ONE PIECE – The most durable, longest lasting striking tools available
- LIGHTWEIGHT & DURABLE – Rounded construction to reduce weight & increase strength
- HIGH LEVERAGE DESIGN – Engineered to produce maximum torque when pulling nails & prying boards
- EXTRA WIDE BLADE – 1-3/4" wide blade to reduce marring when pulling tough nails
- GREAT FOR TRIM WORK – perfect for window & door trim, molding and baseboard
User questions & answers
| Question: | How thick is it |
| Answer: | Yes, if you go to Estwing's corporate website - http://www.estwing.com/about_us.php - you will see that they state that all their tools are made in the USA. "Estwing's manufacturing facility is located in the northern Illinois city of Rockford - about 90 miles northwest of Chicago." |
| Question: | Is this made in the U.S |
| Answer: | Surprisingly durable despite being ratcheted. I've put them through some tough uses and they have not failed me. Figured at 90 degrees prying I might hear a snap but did not. Good quality. |
Edward Tools Wonder Bar Utility Pry Bar - Nail puller/Chisel ends - Perfect tool for prying, scraping, lifting, pulling - Extra strength carbon steel - Leverage design - Rust proof finish (15 Inch)
Product description
Edward Tools Wonder Bar Utility Pry Bar is the all purpose pry bar made of extra strength carbon steel. This utility bar has nail rippers on both ends while the leverage design allows for more force than ever while ripping, prying or scraping. The powder coated finish resists rust and makes for a nicer grip when using. Edward Tools Wonder Bar Utility Pry Bar comes with a lifetime warranty.
- Extra strength carbon steel utility bar
- Powder coated finish to resist rust and last longer
- Extra leverage design
- Ideal utility bar for prying, scarping, lifting and pulling - Nail puller on both ends
- Lifetime warranty
User questions & answers
| Question: | What is the Prop 65 about |
| Answer: | It would not be my first choice for base molding . This is a heavy pry bar more suitable for demolition. You would have to be very careful if you are intending to reuse the molding |
| Question: | Can this be used o pry off base molding |
| Answer: | 3/16" at the thickest part. Plenty strong and we like the length for getting in difficult areas |
Heavy Duty Pry Bar Set (5 Bar Set - 6, 8, 12, 18, 24 Inch) Metal Striking Hammer Cap, Industrial Grade Forged Iron Steel with Angled Tip, Perfect For Prying, Demolition, Nail Puller, Crowbar, & More
Product description
5 Piece Pry Bar Set
- SET OF 5 PRY BARS - 6", 8", 12", 18", and 24" with Metal Striking Hammer Cap
- INDUSTRIAL GRADE FORDGE STEEL - Made From CR-V Forged Steel in Black Finish; These Pry Bars We're Engineered to Prevent to Bending Under Extreme Pressure.
- ERGONOMIC SOFT HANDLE - Comfortabel Soft Handles with Ergonomic Design. Designed to Be Used for Hours Without Hand Fatigue
- PERFECT FOR ANY HOUSE, GARAGE, or PROJECT - Pry Bars go by Many Names; Prybars, Wrecking Bars, Crowbars, Prying Bars; Regardless of What They're Called Everyone Needs a Set. They're Perfect for Demoing, Nail Pulling, Crate Opening, Auto Mechanics, Engine Repair, And So Much More!
- LIFETIME GUARANTEE - Here at Owl Tools (USA Based Company) we only care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please contact us for a full refund or replacement.
User questions & answers
| Question: | How long are the handles on these pry bars |
| Answer: | It does go all the way through the handle. It’s very sturdy when holding a pry back on something. |
| Question: | Does bar go all the way though the handle |
| Answer: | Shipped from China to a USA based company, also lifetime warranty, These items are pretty tough, even the longest bar, I could not break or bend... |
| Question: | I see that the owl tools is a usa based company but are the tools made in the usa or are they shipped from China |
| Answer: | No, it has a sharp edge but becomes thick, use in Demo and ripping up to remove with no intention of reusing, Yes the handle end being part of bar is awesome. I use my set for my profession, Automotive Repair and replace. I just finished putting down a Southern Yellow Pine floor in my house. My folks house had flooring and moldings to match, the Family put the house up for sale and I carefully removed them and used them to finish my floor, if I had used this product, it would have ruined them, I found a much much thinner blade pry bars. |
| Question: | Will these work for prying wood edging and molding |
| Answer: | It's a California thing concerning polution. |
Crescent Flat Pry Bar , Red -FB13
Crescent
Product description
The Crescent CODE RED Flat Pry Bar is one item in a full line of Innovative Demolition, Renovation and Construction Tools by Crescent. Length (Inch) (in.): 13, Finish: Red Enamel,Tip: Ground, End: 90 Degree
- Precision ground ends for nail pulling with less material damage
- Nail slot in end and center for access to pulling nails
- Durable high visibility Red finish is corrosion-resistant
- Radius end design adds strength and provides better prying leverage
User questions & answers
| Question: | How thick is this |
| Answer: | I cannot answer as to it breaking, but do not think you would have the leverage needed for lifting. |
| Question: | Will this work to lift a three inch thick 36 x 36” slab of concrete without breaking |
| Answer: | Made in Taiwan |
| Question: | where is this product made |
| Answer: | Made in Taiwan |
| Question: | where is this product made |
| Answer: | THe three larger bars have 5.5" handles and the two smaller ones have 4" handles. THe bar goes all the way through the handle. |
Latest Reviews
View all
Cla Supplement For Weight Losses
- Updated: 13.06.2023
- Read reviews
New Floor Waxes
- Updated: 14.05.2023
- Read reviews
Garnier Caffeine Creams
- Updated: 14.01.2023
- Read reviews
Virtual Realitys
- Updated: 23.04.2023
- Read reviews
Sony R B Albums
- Updated: 12.02.2023
- Read reviews