12 best little giant pliers

Product description

For assembling/repairing animal cages, hutches, and traps

• Deisgned to be used with Little Giant ACC1 wire cage clips or most other clips

Product description

Wire Clip Pliers

• CAGE CLIP PLIERS WIRE ACP2
• EA 12/CS MILLER
• Wire Cable Clip Pliers
• Use to assemble hutches, pet homes and traps.

User questions & answers

Question:	Do these work with the acc1 wire cage clips here on amazon
Answer:	When using the plank you should never have it on the top rung, if you use it on some of the lower rungs it should be safe if you need to be six feet above the ground level you will need a taller ladder
Question:	Tin snips will cut these just fine right? Use staples to mount or does anyone recommend the clips? For chicken run and garden
Answer:	You need two ladders to support the plank
Question:	Will these work on 1/4 hardware cloth what will work on the
Answer:	I think it is 220 lbs. I am in the 195 lb range and I feel quite safe on the plank although I wish it was a higher limit to allow for things like heavy tools or maybe a 5 gal paint bucket that will exceed the weight limit if you are at 200 lbs or more.
Question:	Will the jaws of these pliers fit through 1/2" hardware cloth holes (straight through, not on a corner or edge
Answer:	Some confusion exists-I have two planks and neither have the same part number that you show in your question. But to answer the best I can, I offer the following:The little giant plank which is the 6 foot one is made in the USA and the part number is "model number 15070"The other one I have is "model number 11016" it is a 10 foot to 16 foot extendable plank. It does not explicitly say where it was made but has nothing but American addresses and telephone numbers etc. on it.Hope this helps...

Product description

Get into small spaces with this 6 PC. Mini pliers set. Made from drop forged steel, these pliers offer strength and durability while the multi-zone bi-material grips allow for dedicated comfort and secure grip zones.

• 6-Piece set.
• Case included.
• Multi-zone bi-material grips for comfort and control.
• Drop forged steel for strength and durability
• Full Lifetime Warranty, refer to "Warranty & Support" section below for full details

User questions & answers

Question:	Made in china
Answer:	Yes, the CMHT81716 is manufactured in China.
Question:	what are the size of the pliers? 4 inch
Answer:	All are slightly over 4 inches in length
Question:	Can these be used for jewelry making and do the pliers have teeth in them
Answer:	I haven’t tried using them for jewelry. Two of the pliers have teeth, 2 are side cutters, 2 have smooth jaws, including the one with the hooked bill.
Question:	Do we make anything in the us anymore
Answer:	I work in a factory that makes cardboard boxes for the agricultural sector. I know someone who works in a glass factory. We still make some stuff in the USA.

Product description

The Hakko PN-20-M is a thin, smooth, pointed, short nose pliers specially designed for delicate work. It has a 12mm long jaw with 1mm nose.

• Steel: 3.0 mm
• Nose: Pointed
• Jaws: Smooth
• Outside Edge: Flat

User questions & answers

Question:	Are these good at untwisting 8awg leads from terminals
Answer:	Yes. The standard J-clip works with this tool. I place the curved piece in the single jaw and the flat end on the double jaw and have always been able to crimp (perfectly).
Question:	I just got these and I was wondering if the handles are supposed to be misaligned, or did I receive a defective pair
Answer:	These are pliers for the clips. Whatever you do, don't use staples for a chicken run. They don't hold well and can easily be loosed by predators.
Question:	Is this a flat bite or round nose plier
Answer:	1/4" hardware cloth measures about 1/4" center of wire to center of wire and the wire clips measure 5/16" they don't fit in between the wires if you don't have a lot to do you could cut a wire to make the clips fit . if you have a lot to do it could be a pain . Bob
Question:	How thick is the steel? I am looking for less than 2mm thick steel
Answer:	YES! I used it on 1/2" hardware cloth myself. It's been a while since I did it but I think the pliers had to go in at an angle but it did work with the clips.

Product features

QUALITY POLICY

We continually strive to put a smile on our customers’ faces by interacting with integrity and seeking the truth with courage as we constantly improve to meet their expectations

EXPERIENCE

For over 60 years, Hakko has been producing superior quality soldering and desoldering tools, hot air rework stations, smoke and fume extraction systems, technical training classes, and a wide assortment of accessories and related equipment for the electronics, industrial and hobby industries.

PEOPLE'S CHOICE

When people are asked why they use Hakko equipment, the answers are nearly always the same: “reliability”, “best value” and “excellent service.”

Product description

4 Pc 11"-Long Nose Plier Set, Heavy Duty Construction, Forged, Cushioned Comfort Grip Handles, 11" Straight Long Nose Pliers, 45 Degree Long Nose Pliers, 90 Degree Long Nose Pliers, "S"-Long Nose Pliers.

• Extra long 11 inch length heavy pliers suited for industrial, construction, home garage or professional automotive use
• Drop forged, high carbon steel construction and hardened teeth makes for a durable plier set
• Curved tip pliers facilitate easy access to hard-to-reach wires and cables at different angles; set includes straight, 45 and 90 degree angled pliers
• Precision riveted joint for smooth action, cross-cut teeth at tip provide omnidirectional gripping
• Textured nonslip rubber soft-grip is comfortable to hold, easy to grip while wet, insulated for cold weather use

User questions & answers

Question:	Do you have any branch in Afghanistan
Answer:	UUGGH!! Hate it when that happens!! Sorry, but you received a dud! The pliers should be perfectly aligned like any other pliers. Maybe yours got damaged somewhere in transit. Honestly, don't give up hope. Send them back and request a new pair. These pliers are really great for hobbies and crafts that require precision. Been using mine for several months now. Love them!! BTW, saw a few reviews that said theirs broke. Well not sure if they're using them to fix their car, cuz that's not what these are made for. Treat them right, and they'll easily become your new favorite tool.
Question:	How wide do the jaws open
Answer:	Thank you for your question. See specs below: SPECIALTY PLIERS Thin, short pliers for very delicate work 12mm long jaw with 1mm nose Steel: 3.0 mm Nose Pointed Jaws: Smooth Outside Edge: Flat We hope this helps! -American Hakko Products
Question:	Where are these manufactured
Answer:	I'm assuming you mean at the tip of the pliers, Yes they are less than 2mm thick. Each tip is about 1mm wide and .75mm thick as an approximation using a ruler and a magnifying glass (I don't have calipers on hand.) Hope this helps.

• 8pcs Package Included -- 1x 5" Round Nose Pliers, 1x 6" Long Nose Pliers, 1x 5" Bent Nose pliers, 1x 4.7" Diagonal Cutting Pliers, 1x 4.1" End Cutting Pliers,1x 4.9" Flat Nose Pliers,1x 4.7" Wire Cutter Pliers,1x 4.9" Needle Nose Pliers.
• Hardend Jaw -- Precision-machined jaws ensure maximum gripping strength. Great for all your craft and DIY needs from wire cutting, electrical repair to jewelry making, any task performing good.
• More Comfortable -- The durable blue fashion grip handle provides extra comfort experience, and double leaf spring creates a self-opening actions reducing hand fatigue - get more efficiency.
• Super Durable Construction -- High quality carbon steel material and rust-resistant finish, they are made for lasting a long time.
• Wood Rack -- Hard to find suitable pliers among lots of tools? We offer a considerate organization method to you. Wood rack is a user-friendly and well-suited way to organize your metal plier set and display on table or countertop, easy for you to pick one to use.

User questions & answers

Question:	Are the jaws spring loaded so they open by themselves
Answer:	They range from 2-2.5"
Question:	Is the cutter sharp
Answer:	This set is manufactured in China.
Question:	Serrated or smooth
Answer:	No, I wouldn't try to use it for that. These are very fine and do not have serrated jaws, so they won't grip well and will probably be damaged by trying to bend something that big.

Product features

Jewelry Making Pliers Set

Color: Blue, Black, Silver

Size:

Pliers: approx.15 cm / 6" (the longest one)

Wood Rack: 240x130x30mm

Material: Carbon Steel, Plastic

Tough Metal Body

Durable carbon steel material made, hardness up to 62 HRC. Ni-plated surface make it durable and rustproof.

Soft Handle

Ergonomic grip is made of PP + TPR material, soft and antiskid designed bring your comfort and high efficiency.

Labor-Saving Spring Loaded

Spring leaf loaded give you easy operation, reopen after every use to help you saving your hand strength, lessens hand fatigue.

Superior Pliers Organizer

Wood rack is a ideal great pliers set holder, easy to fetch and easy to store after use, make your table more orderly.

Complete Jewerly Pliers Set

Our 8pcs durable jewelry pliers set is great for DIY hobbyist, jeweler and electrician. Can be applied in any task like DIY, jewelry making, toy making, and wire cutting, etc. (Note: this product is not insulated)

1 x Round Nose Pliers

1 x Long Nose Pliers

1 x Long Needle Nose Pliers

1 x Bent Nose Pliers

1 x Flat Nose Pliers

1 x Diagonal Cutting Pliers

1 x End Cutting Pliers

1 x Linesman Pliers

1 x Wood Rack

Product description

Specification: Capacity: 1200 gph @ 1 Ft (4542 lph @ 0.3 m) Shut Off: 26.3 Ft (8 m) Liquid Temperature: 120 F (49 C) Discharge: 1 Inch FNPT (25.4 mm) Impeller: Nylon Electrical: 115 V, 60 Hz Little Giant utility pumps provide efficient, trouble-free service for light commercial or residential applications where water removal or transfer is required. Typical applications for Little Giant 5-MSP Pump include commercial, industrial, and home uses where liquid must be transferred or recirculated. This pump is for submersible use only. It has Removable inlet screen for easy cleaning and removes water down to 1/8", is 1/6 HP Permanently Lubricated.

• UTILITY WATER PUMP: The Utility pump includes 1" NPT Discharge outlet and garden hose adapter. Maximum Capacity is 1,200 gallon per hour.
• SUBMERSIBLE PUMP: Typical applications for Little Giant 5-MSP Pump include commercial, industrial, and home uses where liquid must be transferred or recirculated. This pump is for submersible use only.
• LITTLE GIANT PUMP: Little Giant utility pumps provide efficient, trouble-free service for light commercial or residential applications where water removal or transfer is required.
• AUTOMATIC UTILITY PUMP: It is Epoxy coated die-cast aluminium housing and has 1/6 HP oil-filled shaded pole motor with overload protection.
• SUBMERSIBLE UTILITY WATER PUMP: It has Removable inlet screen for easy cleaning and removes water down to 1/8", is 1/6 HP Permanently Lubricated.

User questions & answers

Question:	what is the replacement oil for a little giant submersible pump model
Answer:	Yes
Question:	How long is the cord
Answer:	Yes, the cutter is sharp. I have used it to cut apart flower stems and picks, which I use for making wreaths.
Question:	can a automatic shutoff unit (from an old mighty pump) that still works be be attached
Answer:	Smooth
Question:	Can you use this pump to drain a hot tub? I keep the water temp at 103 is that too hot for the pump to work
Answer:	Unfortunately we do not.

Product description

Lifegoo 5 Piece Mini Pliers - Mini Needle Plier / Mini Long Nose Plier / Mini Diagonal Plier / Mini End Cutting Plier / Mini Linesman Plier / Nylon Bag Bonus with Gloves for jewelers, beaders, arts and crafters, students, mechanical work, beading work, small electronics repair and other hobby work.



5PCS Precision Mini Pliers Set' Some Features



1.5 different pliers largely cover your precise jobs

2.Long lasting drop forged steel construction & Ni-Fe coating

3.Jaws are hardened to HRC55-65 for durablity

4.Bi-material comfort grip handle for non-slip hold

5.Constructed from drop forged carbon steel for durability and rust resistance

6.Each pliers is equipped with double spring strips to reduce fatigue

7.Machined jaws help grip items securely

8.For gripping small objects in confined space, precision hand work

9.Handy yet tough bag for easy carriage and storage

10.This tool set also can be ideal gift for DIY enthusiasts



Package Include



1.Mini Needle Plier 5.82in

For holding and repositioning wire and small objects

2.Mini Long Nose Plier 4.84in

For cutting, bending, twisting and gripping wire

3.Mini Diagonal Plier 4.41in

For cutting wire

4.Mini End Cutting Plier 5.1in

For pinching, cutting, or pulling an object

5.Mini Linesman Plier 0.78in

For gripping, twisting, bending and cutting wire

6.Nylon Bag

The compact zip bag keeps these pliers in perfect order and prevents them from falls or collision.



7.Gloves

It is normal to not have oil on the head of the pliers.This will effectively extend the life of the pliers.We have prepared gloves for you.Let you create happily.



About Lifegoo

If there are any problem , fell free contact to us and we will solve your problem within 24h.

• 【Pliers Includes】: 5pc set contains pliers for any job-Mini needle plier,long nose plier,diagonal plier,end cutting plier,linesman plier.Each pliers feature a different head so you are covered for all your craft and DIY needs from wire cutting, looping, gripping and shaping.
• 【Spring Loaded Easy Operation】: Each pliers is equipped with double spring strips,convenient handling with spring loaded release, easy to work with two or three fingers in tight areas to reduce fatigue
• 【Widely Application】: Highly recommend to beginners and professionals. Perfect for jewelers, beaders, arts and crafters, students, mechanical work, beading work, small electronics repair and other hobby work.
• 【Hight Quality Material】 : Made from high-strength chrome vanadium steel,drop Forged and whole-body heat treatment.additional nickel-iron plating improves the corrosion resistance of the surface,high frequency cutting edge processing makes the pliers sharper and more durable and effectively prolong the service life of the plier.
• 【Ergonomic Design and Storage Bag】ERGONOMIC DESIGN: These pliers are designed with anti-skid handle, which makes them comfortable to use labor-saving, suitable for long-time work.Handy and tough bag is easy for carry and storage. Compact bag with elastic bands inside

User questions & answers

Question:	Hi, can you provide dimensions for the end cutter overall length, jaw length and jaw width
Answer:	We used to use this same pump to drain our hot tub. Worked great. I do not think 103˚ would hurt this pump. You would NOT want to drain the tub with the heaters still connected to power, so why not just wait a little bit and let it cool down a little. I would worry about the output hose more than the pump. Just no logic to pumping it hot.

Product description

Features durable nickel chromium steel construction. The ProTouch grips provide extra comfort and reduce hand fatigue. Machined jaws provide maximum gripping strength. Induction hardened cutting edge stays sharp longer. These pliers feature a superior long reach design for work in confined areas. IRWIN Tools VISE-GRIP Long Nose Pliers, 6-Inch (2078216)

From the Manufacturer

The IRWIN Vise-Grip 2708216 - 6" Long Nose Pliers have a induction hardened cutting edge that stays sharper, longer. The machined jaws provide maximum gripping strength. The Long Nose Pliers also have ProTouch grips that have molded handles for comfort and create less hand fatigue. All pliers meet or exceed ANSI specifications.

• Features durable nickel chromium steel construction
• The ProTouch grips provide extra comfort and reduce hand fatigue
• Machined jaws provide maximum gripping strength. Induction hardened cutting edge stays sharp longer
• These pliers feature a superior long reach design for work in confined areas

User questions & answers

Question:	Can these cut through the wire in the stem of fake flowers
Answer:	Don't know. I returned them!
Question:	the 6 and 7" pliers tips are they flat or does it have grooves for gripping
Answer:	That's a good question. When you find out, please let me know. Where and how would you replace the oil ?
Question:	manufactured in which country
Answer:	It's 25ft idk where these idiots are getting 10ft 15ft there just blurting numbers out... The little Giants are generally all the same the only difference is the cord length and some have automatic shut offs and others don't...I use this to drain pools and spas on a daily basis..these water wizard used to be great and if beat the crap out of them for 4-5yrs before I had to replace them...but unfortunatly they are no longer built to last I buy a new one every few months sad...All I can say is CHINA POS
Question:	Are these manufactured in the USA
Answer:	I have never used one but I would assume so. I just reconnected mind to a thermostat for my greenhouse water wall. I’m very disappointed with the quality of today’s little giant pumps. Years ago they would last me about five+ years. The one I just bought lasted only six months.

• 6 PLIERS INCLUDED: Our tool set comes with long nose, bent nose, needle nose, diagonal cut, end cut, and combination pliers that you can use for gripping, cutting, and bending steel wires.
• BUILT TO LAST: Ordinary pliers tend to rust or crack easily. Our pliers are made of heavy-duty nickel-plated carbon steel, which withstands corrosion, stains and rust, ensuring many years of durability.
• COMFORTABLE GRIP: Our pliers feature spring-loaded bi-material TPR handles, which are designed to prevent grip fatigue and keep the pliers from slipping out of your hand while you work on your projects.
• HASSLE-FREE CARRYING & STORAGE: These pliers come with a sturdy carrying bag, which conveniently rolls up into a small bundle that fits easily in your tool box, car compartment, or locker.
• SATISFACTION GUARANTEED: At Kendo tools we stand by the quality construction and durability of all our products. We are fully committed to customer satisfaction with a lifetime warranty against any manufacturer defects.

User questions & answers

Question:	Are these made in the U.S.A
Answer:	Yes, they can but they are hard to grip if you had big hands.
Question:	Are these heavy duty enough to work with 12 gauge copper wire
Answer:	Thank you for choosing Irwin Tools. Our goal is to provide our customers with the highest quality and service. The IRWIN Tools VISE-GRIP Long Nose Pliers, 6-Inch (2078216) has very small grooves in the jaws for gripping.
Question:	Are these suitable for working on live electrical wires
Answer:	The IRWIN 2078216 is manufactured in China.
Question:	Are the inside of the jaws smooth, so they won't mar
Answer:	No, the 2078216 are manufactured in China.

Product features

GRIP, BEND, & CUT WIRE

Our pliers set comes with a 4.5-inch long nose, bent nose, and needle-nose pliers that you can use for gripping, bending, and cutting small-gauge wire. The thin, narrow nose of these pliers allow you to hold small things in place or pick things up.

TWIST, EXTRACT, & CUT THICK WIRES

The set also includes a pair of combination pliers that can serve multiple purposes, such as twisting and extracting various materials. The diagonal cut pliers are used for cutting thicker cables and wires, while the end cut pliers let you cut easily through rivets and bolts.

READY FOR ANYTHING

Rust renders cheap pliers past the point of serviceable quickly. The pliers in our set are made of premium carbon steel that can withstand daily wear and tear, being highly resilient against deformation and abrasion.

NO MORE GRIP FATIGUE

Our pliers are given bi-material TPR comfort grip handles, which are ergonomically designed to fit your hands perfectly. These handles will also prevent the pliers from slipping out of your hands, preventing work-related injuries and untoward accidents.

TRAVEL-FRIENDLY SIZE

Handy and compact in size, these 4.5 inch pliers won’t take up too much space in your tool box, locker, glove compartment, or work bag. They come in a portable travel bag, which rolls up into a small bundle – keeping all your pliers in one place.

PROFESSIONAL QUALITY

Our pliers give you an easier time working on your house repairs and crafting projects, thanks to their sturdy spring-loaded handles. The plier heads are also nickel iron plated, giving it additional protection against corrosion and rust.

World-Class, Innovative Tools

At Kendo, we aim to produce the best hand, machine and power tools in the world for the international market. All Kendo tools are designed to the highest standards of performance.

We stand by the quality construction and durability of all our products, so you can always buy with confidence with Kendo.

Product description

This is the 'pull-out' style hinge lock. Fits the original and Classic Type 1A 300lb rated Little Giant Ladders from 1991 and earlier, and US military Little Giant Ladders from 1979 - current, including the Aircraft Support ladders. Not designed to fit ladders that came with the orange Palm Button, nor any competitors ladder. This is a genuine Little Giant Ladder replacement part.

• Includes Hinge Lock Assembly
• Fits Classic 1A Little Giant Ladders from 1991 and earlier.
• Also fits US military Little Giant Ladders, including the Aircraft Support Ladders.

Product description

• Type: Bent Nose
• Serrated blades
• Project type: Robotics, Electronics
• Packaged In A Retail Blister Pack

User questions & answers

Question:	Will the jaw of these pliers work to remove snapped off key(s) from a passage lock (e.g. Schlage
Answer:	No, they're made in Shanghai. It does not say on the pliers or the bag, but looking it up it only lists Shanghai.
Question:	I have the end piece of headphone connector stuck in the audio jack of an iPad, I'm looking to see if this is tiny & strong enough to pull it out
Answer:	No, they are light duty, miniature of 12 ga wire cuts, more for jewelry on soft metals.
Question:	The picture of Xuron 405S shows a straight nose but the description says bent nose. Is the nose bent or not
Answer:	They are NOT insulated, so I don't think they fit for this job.
Question:	would these work for removing small bones from fish
Answer:	Most of them are smooth except for the combination and long nose pliers, those two have teeth inside their jaws. I hope this helps.