13 best roof cutter

Product description

INCLUDES: Shingle Cutter with hanging bracketFEATURES: Use for starter rows, hips and valleys Features built-in angle/pitch meter for faster valley/hip cuts and a 22-1/2 in. tape measure built into the cutting boardLightweight shingle cutter design with handle for easy transport. Cut and rip asphalt/fiberglass shingles with ease. Also includes angle meter on table for valley and hip cuts.

• Shingle Shaper Shingle Cutter Roofing Tile Cutter
• Light weight shingle cutter design with handle for easy transport.
• Cut and rip asphalt/fiberglass shingles.
• Also includes angle meter on table for valley and hip cuts.
• This blade is made out of carbon steel and should not need sharpening.

User questions & answers

Question:	We're can I get parts for this
Answer:	roofzone.com
Question:	Was this design purchased from Howard Tools or is it just a knock-off
Answer:	It worked will even cutting cold multi-laayer shinges. you would have to do a light copping to cut through the cold shingles with that were multi-layers. great time saver. light weight alumnium construction. Makes cutting hips and valleys easy. If you plan on using this as an every day tool i am not sure its heavy duty enough for that, but the price reflects that. I wolud not do another roof without one. thanks,

Product description

MAXCUT Does It All. The MAXCUT Multi-Cutter takes on the hardest cutting jobs and comes back for more. Serrated blades grip and cut while compound action powers through hundreds of materials, from leather to shingles to 20 gauge steel. Blade design includes a twine cutter, wire cutter, bottle opener and wire bending holes for added versatility.

• The Non-slip grips provide added comfort and durability
• Compound action design delivers 1.5x the cutting power of traditional design for less effort during cutting
• 3" blade for making long cuts in a wide range of materials
• Serrated blade helps hold material firmly for better cutting
• Nickel chrome blades resist rust and corrosion

User questions & answers

Question:	Will this work for trimming a carpet pad
Answer:	We would not suggest this for trimming a carpet pad.
Question:	Is it good for cutting roof shingles
Answer:	Yes I can answer. Not a yes or no Good for doing precision detail work. Not recommended for general cutting of mass quantities of asphalt shingles. I usually score and bend most shingles. Per my husband.
Question:	Can you cut through 10 gauge hard copper & brass jewelry wire with these
Answer:	MPX5 is great for cutting sheet metal(low carbon rolled steel up to 20 gauge), plastics, vinyl, carpet, gutters, cardboard, paper, screen, wire mesh, hose, roof shingles, wallpaper, cloth, etc.
Question:	Any idea if this would cut carpet
Answer:	This is a multi purpose cutter. We do have several carpet shears, Wiss part #'s are W20, W22N, W1225 and W1226.

Product features

Serrated Blade

Three-inch serrated blades make long cuts, provide extra gripping power, and are coated to resist corrosion.

Twine Cutter

A twine cutter at the blade tip quickly slices twine and string.

Wire Cutter

A built-in wire cutter makes fast cuts of most common wire. Thru-holes bend wire with a twist of the wrist.

Bottle Opener

When it's time for a break, there's even a handy bottle opener!

Benefits

Max Cut's rugged, ergonomic handles provide added comfort and help prevent slipping. An easy-to-use latch locks the blades closed. The integrated hanger allows for convenient storage.

And, the integrated spring action returns the blades to the open position—reducing the strain of repetitive cuts.

Plastics, cardboard, screen, garden hose, even tough material like shingles, leather, and sheet metal are no match for MaxCut.

If you think multi-tools can't hold up to heavy use, think again. MaxCut is made by Wiss, the leading name in professional cutting tools. So you know it's built to last. Wiss. Precision. Performance. Durability.

Product description

PRODUCT DESCRIPTION:

The Utility Hook Blades that every roofers, carpenter, and electrician is sure to need. Crafted from professional grade SK5 carbon for edge retention and toughness. SK5 steel is very close to carbon steel W2 and 1084. Suitable for use with all standard fixed blade and retractable utility knives.



Sufficient quantity:

There is a total of 30 pieces of hook replacement blades in the package, which are sufficient for you to use and replace for a long time. And every 10 pieces are packed in a plastic box, making it more convenient to use as well as providing safe storage.



Specifications:

Style: Hook

Size: approx. 1.92 x 0.74 x 0.23 inch/ 49 x 19 x 6 mm

Material: carbon steel

Color: silver

Package includes:

30 x Hook blades

3 x Plastic boxes



Curved design to prevent damage:

These roofing razor blades feature a curved design that will help avoid unnecessary damage to the surface which is often caused by straight blades, helping you cut the materials easily without damage, nice accessories for you to keep at home, and are ready to use.



FEATURES:

-Adopted premium SK5 steel to prolong its service life.

-Hook design help avoid damage to surfaces below.

-Universal design fits most utility knives.

-Cut and trim roofing materials, linoleum, carpet, fabric, cartons, and sheet metal.

-10 value pack stored in the plastic box for convenient use.

• 【Carbon Steel Construction】the hook blades are made of quality SK5 carbon steel for enhanced durability to prolong its service life, sturdy and wear-resistant, provide superior edge holding ability of the blade, and ensuring you a nice user experience.
• 【Versatile】Cuts and trims roofing materials, linoleum, carpet, fabric, cartons, and sheet metal; Blade shape prevents damage to surfaces below.
• 【Blade Size】1.92 x 0.74 x 0.23 inch/ 49 x 19 x 6 mm. The standard-sized notch makes it fit most standard utility knives.
• 【Safe Packaging】30 pieces of knife blades are stored in 3 plastic boxes for convenient use and storage, which also well protects the blades and helps avoid unsafe accidents for there are
• 【Smooth And Quick Cutting】sturdy carbon steel material ensures that the hook knife blades are efficient to use, they are sure to make the cutting work on the site convenient, smooth, and quick.

Product description

Cut roof shingles easily and with precision thanks to the Qual-Craft Shingle Shark Shingle Cutter. You'll be able to make accurate and repeatable cuts at any angle, as well as lengthwise cuts for a starter row along the edge of the roof. This versatile machine cuts through a variety of different shingle materials, featuring an adjustable blade for optimum cutting action. With built-in safety features, a self-cleaning cutting arm, and sturdy construction, the Shingle Shark will make your roofing work faster.

Versatility to Cut at Any Angle

The Qual-Craft Shingle Shark makes clean cuts at any angle through asphalt, fiberglass, and laminated shingles. Thanks to its adjustable, self-cleaning blade, you get uninterrupted cutting action without needing to sharpen or replace the blade.

The crosscut guide easily adjusts a full 180 degrees for any angle. It cuts face up or face down, and from either the top or the bottom. For starter rows, it will make lengthwise and ridge cuts. For supreme convenience, there are two offset hole options--one for metric, the other for Imperial/USA shingles.

Valuable Tool for Professional and Home Applications

Professional contractors and weekend do-it-yourselfers will appreciate the Shingle Shark's powerful blade and stable build as they move from project to project. Thanks to its simple use, workers can put an end to jagged cuts that often result from cutting shingles by hand with a knife. Though the cutter comes with a standard guide, an offset guide for 18-inch architectural shingles can also be added.

Built for Safety and Durability

The Shingle Shark comes with a safety latch for the cutter, and can be securely mounted on roofs three different ways: using a cleat, footing the tool against a piece of 2-by-10 lumber, or using a 6-inch by 90-degree roof bracket. Rubber feet provide added gripping power. For durability, the tool is constructed of cold rolled steel with a powder coat paint finish. The sturdy open mesh table keeps its weight down to 52 pounds.

What's in the Box

Shingle cutter and instruction manual.

From the Manufacturer

Qual-Craft 1000B Shingle Shark Shingle Cutter is designed to allow for accurate and repeatable cuts at any angle, as well as lengthwise cuts for a starter course used along the edge of the roof. It has two offset holes, one for meteric and one for US shingles. The crosscut guide adjusts a full 180 degrees for any angle, cuts face up or face down and from either the top or bottom edge. It can be set up by using a cleat to prevent slippage, using a piece of two-by-ten lumber and footing the tool against it, or by using a 6-inch by 90-degree roof bracket.

• Designed to allow for accurate and repeatable cuts at any angle
• Can be used for lengthside cuts for a starter course
• Two offset holes (one for metric and one for U.S. shingles)
• Crosscut guide adjusts a full 180 degrees for any angle
• Cuts face up or face down, and from either the top or bottom edge

Product description

The 12V max CXT Multi-Cutter is a cordless cutting solution for cardboard, carpet, leather, rubber, vinyl, and more. With 1/4” material cutting capacity, 300 RPM, and self-sharpening blade, the Multi-Cutter is engineered for maximum cutting efficiency. Convenience features include a compact and ergonomic design, with a built-on lock-on lever helps prevent the tool from accidentally engaging. It weighs only 1.6 lbs. with 12V max CXT Lithium-Ion 2.0Ah battery (sold separately).



For longer run time, 12V max CXT cordless tools are also compatible with the 12V max CXT Lithium-Ion 4.0Ah battery (BL1041B). 12V max CXT Lithium-Ion batteries are engineered with a Battery Protection Circuit that protects against overloading, over-discharging and over-heating. It’s part of the expanding 12V max CXT series, combining performance with superior ergonomics in a compact size.

• Capable of cutting single wall corrugated cardboard, tufted carpet up to ¼” thick, thin leather, rubber up to 1/8” thick, and plastics up to 1/16"
• Self-sharpening blade feature ensures maximum cutting efficiency
• Built-in sight line for precise cutting
• Weighs only 1.6 lbs. With battery (battery not included) for reduced operator fatigue
• Compact and ergonomic design at only 10-3/4" long

User questions & answers

Question:	Does this tool come with the batteries and the charger. It says tool only however on then further down it says Yes on the line item for batteries and
Answer:	Mine came with a battery, charger and a nice fabric case. Nice tool.
Question:	Does this tool come with the batteries and the charger. It says tool only however on then further down it says Yes on the line item for batteries and
Answer:	The kit comes with a battery and a charger; however, the blade came attached and there is no blade locking pin so you will have to improvise if you want to change the blade. I used a piece of bent coat hanger. Makita Customer Service was unfamiliar with a replacement part and you will not likely find it on line because the tool is brand new. If you want to search, the blade and pin come together as part number 198604-1.
Question:	will it cut astro turf
Answer:	no
Question:	Will it cut garage floor vinyl flooring material cleanly
Answer:	No, unfortunately, it doesn't cut vinyl flooring worth a darn.

Product features

Makita PC01Z 12V max CXT Lithium-Ion Cordless Multi-Cutter, Tool Only

The 12V max CXT Multi-Cutter is a cordless cutting solution for cardboard, carpet, leather, rubber, vinyl, and more. With 1/4” material cutting capacity, 300 RPM, and self-sharpening blade, the Multi-Cutter is engineered for maximum cutting efficiency. Convenince features include a compact and ergonomic design, with a built-on lock-on lever helps prevent the tool from accidentally engaging. It weighs only 1.6 lbs. with 12V max CXT Lithium-Ion 2.0Ah battery (sold separately).

• Heavy duty retractable high quality utility knife offers more comfortable grip than clunky, foldable knives. Full metal, durable design allows for a long lasting, extremely durable cuts and slices on boxes, plastic packaging, and straps.
• We include 5 spare hook blades with our utility knives. Superior American-made quality blade cuts and trims thick materials such as, roofing materials, linoleum, carpet, fabric, cartons and sheet metal. Perfect roofing knife for shingle cutting.
• Our hook blades will help avoid unnecessary damage to the surface which is often caused by straight blades. However, it accepts both straight or hooked blades
• Weupe retractable utility knife fits for most standard blade brands. Use any two-notch style razor knife blades in our handle.
• Conveniently store extra blades in handle. Change blades quickly and easily! Blade easily retracts to lock safely within metal frame when finished using

Product description

Pac Cutter is a reciprocating saw blade. Dual-edge for maximum drywall cutting efficiency. Short blade prevents damage to electrical wires in the wall. Great for professionals and do-it-yourselfers. Cuts through plywood, CDX in shingle roof,hardy back board, wonder board, interior plaster, and any dry foam. Punch Cut and Sew 95% accuracy. Useful on reciprocating power saw high or low speed Do you install drywall professionally or at home? If so, then you know it can be difficult to cut through drywall with a standard blade with the Pac Cutter you can cut through drywall with ease. It is a reciprocating saw blade. This unique blade is shorter than a standard reciprocating saw blade, making it less likely to run into electrical wires behind the wall. The Pac Cutter also features dual-edge cutting blades.Make your next drywall job a breeze with the Pac Cutter. Pac Cutter es una hoja de sierra de vaiven . De doble filo para una máxima eficiencia de corte de paneles de yeso . Su corte previene el daño a los cables electricos en la pared . usual para los profesionales y agalo por si mismo. Corta a traves de la madera contrachapada , CDX en tejas de asfalto , resistente fibrocemento , tablero resistente , yeso interior , y cualquier espuma seca . Perforar corta y cose el 95 % de precisión . Útil en la sierra de movimiento alternativo de potencia alta o baja velocidad Cómo se puede instalar paneles de yeso profesional o en casa ? Si es así , entonces usted sabe que puede ser difícil de cortar a traves de paneles de yeso con una cuchilla estándar con el Pac cortador se puede cortar a traves de paneles de yeso con facilidad . Es una hoja de sierra de vaiven . este único la hoja es más corto que un movimiento alternativo estándar de la hoja de sierra , lo que es menos probable que se ejecute en alambres electricos detrás de la pared . El Pac cortador tambien dispone de doble filo cuchillas .Que ace su próximo trabajo paneles de yeso una brisa con el Pac cortador

• Pac Cutter | Electrician, Drywall, Roof, Plumber, Shear & Wall Tools

Product description

The Prazi USA PR7000 Beam Cutter (for 7-1/4-Inch Worm Drive Saws) cuts angles up to 45 degrees. The vertical foot-plate and built-in sight allow smooth, exact square cuts and ensures gliding manageability while cutting perfectly straight lines. With a 12 in. cutting capacity, you can professionally execute the following cuts and many more: rafter pitch cut, miters, stairs, arches, log cuts, compound angles, band saw cut, notch 6x12 panels and ripping. Quick & Easy Installation - 60 Second Installation, Installs with Three Bolts (included), No Need to Remove Any Saw Parts. Built-In Safety Features - Dust Deflector Guard, Double-Guarded, Kickback Resistant, Guide Bar, Low-Profile, Anti-Kickback Chain, Chain Guard with OSHA Recommendation. Vertical blade produces smooth, exact, perfectly square cuts. Foot Plate & Built-In Sight - Ensures perfectly straight cuts, Provides gliding manageability & precise control. Field Proven - Tested & proven under real world conditions, Meets the demands of every professional. NOTE: PR-7000 fits only SKIL or BOSCH 7-1/4" and 8-1/4" worm drive saws. Replacement chain Number P7020.

From the Manufacturer

The Prazi USA PR7000 Beam Cutter (for 7-1/4-Inch Worm Drive Saws) cuts angles up to 45 degrees. The vertical foot-plate and built-in sight allow smooth, exact square cuts and ensures gliding manageability while cutting perfectly straight lines. With a 12 in. cutting capacity, you can professionally execute the following cuts and many more: rafter pitch cut, miters, stairs, arches, log cuts, compound angles, bandsaw cut, notch 6x12 panels and ripping. Fits Skil models 77 and 5860; Makita model 5077B; Milwaukee models 6377 and 6378; Black & Decker models 2700, 2710 and 3051; Craftsman model 2761; and DeWalt model DW377. Does not work with the DeWalt model DW378G.

• Prazi Beam Cutter works with Bosch and Skil 7 1/4 and 8 1/4 worm drive saws
• Executes log cuts, compound angles, bandsaw cuts, and more
• Footplate and built in site ensures glide management; vertical blade allows smooth, exact, square cuts
• Will cut angles up to 45 degrees
• All products guaranteed--defective products can be returned for warranty replacement

User questions & answers

Question:	Does it convert back to a circular saw
Answer:	Yes, it can work with cat 5e.Great price, plug in and get going. I used it for my smart TVs and Xbox. No lagging a open up my Wi-Fi space. I also used CAT 5e cable for the best performance.
Question:	Can you set depth of cut
Answer:	AT&T provides its services through its Fiber Network. This is a Gigabit Switch so normally it can support the network connectivity a user wants. Please also consult with AT&T support for any specific requirements.
Question:	Has anyone put a prazi on a new version of the skil 77 wormdrive? i cannot get the guide off in order to put the prazi attachment on
Answer:	270 CCA Its been Great!
Question:	does it fit a makita 5277 wormdrive saw
Answer:	I had no issues with this battery.

Product description

Remember when you could cut through metal? Glide through 20 gauge stainless steel or 18 gauge sheet metal with the WEN Variable Speed Electric Metal Shear. The lightweight 4.7-pound design limits fatigue during operation while the powerful 4-amp motor makes easy work out of a variety of metals. The pressure sensitive switch adjusts the speeds of the cut anywhere from 0 to 2500 strokes per minute depending on the force applied. The pivoting head rotates a full 360 degrees to allow for cutting at any angle or direction without having to have an awkward or uncomfortable hold on the shear’s handle. And, because it’s a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer phone line all to make sure you remember WEN.

• Pressure sensitive trigger cuts anywhere from 0 to 2500 strokes per minute
• Attack up to 20 gauge stainless steel and 18 gauge sheet metal
• Lightweight design limits fatigue during operation
• Utilizes a powerful 4-amp motor, curling the metal as it cuts
• Swiveling head rotates a full 360 degrees to meet the needs of any project

User questions & answers

Question:	Will it cut the plastic on a truck truck bedliner
Answer:	I found it cuts vinyl soffit with no trouble, neat, efficient and quick. I think they are similar.
Question:	will this cut the alum side panels on enclosed trailer
Answer:	Easily, I've used it on 1/8th thick T6 alum without any issues.
Question:	Does it come with a case
Answer:	Mine did not come with a case.
Question:	How well will this cut 29 gauge galvalume rib steel roof panel? i see the spec for 18 gauge metal
Answer:	I cut 28 gauge steel with it with no problem 29 gauge is thiner yet ( smaller the # thicker the steel ).

Product features

Shear Metal. Sheer Power.

Remember when you could cut through metal? Glide through 20 gauge stainless steel or 18 gauge sheet metal with the WEN Variable Speed Electric Metal Shear. The lightweight 4.7-pound design limits fatigue during operation while the powerful 4-amp motor makes easy work out of a variety of metals. The pressure sensitive switch adjusts the speeds of the cut anywhere from 0 to 2500 strokes per minute depending on the force applied. The pivoting head rotates a full 360 degrees to allow for cutting at any angle or direction without having to have an awkward or uncomfortable hold on the shear’s handle. And, because it’s a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer phone line all to make sure you remember WEN.

360-Degree Swivel Head

Pivot the head 360° to help accommodate comfortable cuts from any angle or direction.

Cut up to 18-Gauge Metal

The powerful 4-amp motor slices through 18-gauge sheet metal and 20-gauge stainless steel.

Variable Speed Operation

The pressure-sensitive trigger varies the strokes per minute from 0 to 2500 SPM depending on the pressure applied.

Double Cut Design

The double-cut blade configuration creates a 1/4-inch ribbon of curled metal during operation.

Lightweight Design

The lightweight ergonomic design weighs in at a mere 4.7 pounds, limiting fatigue during operation.

3-Inch Turning Radius

Cut circles with radiuses of 3 inches and up to help take on projects with a lot of turns and curves.

Product description

Price Uom: Each

• Made from lightweight aluminum
• Super Shear cuts steel up to 26 gauge and aluminum up to 20 gauge
• Built in scales measure length and roof pitch angles
• Attached bracket and rubber feet provide rooftop stability

User questions & answers

Question:	I see it cuts metal and shingles can this also cut fiber cement siding
Answer:	We use it for asphalt shingles and it works great! I would be very skeptical of it cutting fiber cement siding. As I have never tried it myself, I can’t say it wouldn’t work, but I don’t think it would. Hope this helps.
Question:	What are the dimensions of this item
Answer:	They will have replacement part dimensions
Question:	where can i buy replacement cutting blade
Answer:	Trt ajc direct
Question:	What are the overall dimensions
Answer:	It’s roughly 20”x 20” square.

Product description

Package includes one Hand-held Hot Wire Foam Cutter, 30 feet of Nichrome wire, spare 10 AMP Ceramic fuse, instructions and carrying case

• Shape large blocks or sheets of EPS, Geofoam, Roof Insulation and other structural and non structural foam materials on construction site
• User friendly, reliable, cost effective, compact and easily transportable tool
• Effortlessly cut EPS Geofoam quickly, easily and efficiently in a field setting.
• Manufactured in the USA
• A MUST HAVE TOOL for every construction professional working with any type of foam material

User questions & answers

Question:	can i cut 2lb density EPS with this
Answer:	Most users cut 1 lb density EPS, but checking with a leading manufacturer of EPS, they use the cutter with 1, 2 and 3 lb density EPS.
Question:	What is the maximum length of foam I can cut cleanly
Answer:	There is a 13-foot wire connecting the handles. Typically most use the tool to cut up to 10-foot blocks of foam.
Question:	it cams with wire
Answer:	Yes. Includes a 30-foot spool of Nichrome wire.

Product description

The variable pitch of the curved blade gives excellent "bite" on the toughest slate varieties up to 3/8" thick. For greater stability, two pieces of angle iron can be fitted to the bottom section by means of predrilled screw holes, at the option of user. The angle iron is included with purchase.

• Will make straight, as well as concave and convex cuts, leaving a professional chamfered edge.
• Adept at cutting smaller pieces to be fitted around chimney or valley of roof.
• The tough, heat treated blade is removable and can be reordered as can the punch.
• Overall length is 25"
• Cutting Blade Length is 4"

User questions & answers

Question:	Is it possible to make a cut without the chamfered edge with this tool? Thanks
Answer:	The slate will crumble a little with every cut. If you want a perfect straight cut with no feathering on the edge you might try a wet blade diamond saw.
Question:	Is this easy enough for girl strength? Thanks
Answer:	I bought it for my fiance, he said yes a girl is strong enough to use it. Cutting slate is more about skill than strength, depending on how thick the slate is, hope this helps! :)
Question:	This appropriate for cutting slate tiles (not just roof slate
Answer:	I use this cutter for slate roofing tiles Only works great not sure if is god for any other types of tiles

Product description

Keyfit Tools CUTS ALL Box Cutter Utility Roof Knife Double sided Stainless Steel Serrated Blade for trimming shingles / Works great on carpet, linoleum, drywall



~See all our products at KeyfitTools ~Keyfit Tools Patented Products

• Multi Use Utility Knife Great for Cardboard Roofing, Shingles, Drywall, Carpet, Vinyl flooring, Linoleum
• Box Cutter Works Great On Multi Depth Boxes ~Cuts Through Boxes Like Butter
• Double Sided Stainless Steel Blade 5" handle 8" Blade
• Works on roof shingles, carpet, vinyl flooring etc.
• Super Sharp Serrated Blade ~See all our products at KeyfitTools ~Keyfit Tools Patented Products