10 best pony bench vise

Product description

The Pony Style 29000 vises are an economically price and are an alternative to heavier duty bench vises but greater in strength than light-duty vises. These vises feature swivel bases with a lock down-nut, replaceable hardened-steel serrated jaws faces, large ground and polished anvils, permanent pipe jaws and large forming horns. The Pony 29040 features: 4 inch opening capacity, 4 inch jaw width, 2-1/4 inch throat depth, 1/4 inch to 1-1/2 inch pipe jaw capacity and 19 pound weight. The Chicago based Pony Tools Inc. (formerly known as Adjustable Clamp Co.) which was established in 1903 is the manufacturer of all Pony and Jorgensen products. The Pony Style 29000 vises are imported from China.

• 4 inch opening capacity
• 4 inch jaw width
• 2-1/4 inch throat depth
• 1/4 inch to 1-1/2 inch pipe jaw capacity
• Swivel base with lock-nut

User questions & answers

Question:	How many hold downs for swivel, (1) or
Answer:	Yes—it does swivel; almost a full rotation. I’d say its stop is at about 300 degrees (left and right), and it locks in place firmly with very little tension required. All around, it’s a great bench vise. The only thing to note is that I found a little resistance in the slide jaw... so you might want to clean and re-oil the slide screw.
Question:	does this vise swivel 360 degrees, if not what is the swivel limit
Answer:	7/16" tight, just use 3/8" bolts and you will be good to go
Question:	what is the bolt hole size? ~1/4" or smaller
Answer:	They have 16 international manufacturing locations and there was no way to tell from the packaging the location. I can say it is quality manufactured regardless of location.
Question:	Is this vise made in the USA
Answer:	2-1/2" x 1-3/4" x 1/2". The narrowest part of the tapered section is 3/4". This is a great little level because it gets into everywhere AND it is very accurate. I definitely am glad I purchased it and I would recommend it to a friend.

Product description

The Pony Style 29000 vises are an economically price and are an alternative to heavier duty bench vises but greater in strength than light-duty vises. These vises feature swivel bases with a lock down-nut, replaceable hardened-steel serrated jaws faces, large ground and polished anvils, permanent pipe jaws and large forming horns. The Pony 29050 features: 5 inch opening capacity, 5 inch jaw width, 2-5/8 inch throat depth, 1/2 inch to 1-1/2 inch pipe jaw capacity and 27 pound weight. The Chicago based Pony Tools Inc. (formerly known as Adjustable Clamp Co.) which was established in 1903 is the manufacturer of all Pony and Jorgensen products. The Pony Style 29000 vises are imported from China.

• 5 inch opening capacity
• 5 inch jaw width
• 2-5/8 inch throat depth
• 1/2 inch to 1-1/2 inch pipe jaw capacity
• Swivel base with lock-nut

Product description

The Pony Multi Purpose bench vise features heavy duty rugged strength usually available only in more expensive vises. Jaws rotate a full 360 degrees. Three different styles of jaws can be rotated to any work position and securely locked. The parallel steel jaws hold most flat objects in any position. Large steel pipe jaws hold pipe or rounds objects up to 3 Inch. The steel "V" jaws can hold most round, cylindrical or odd shaped objects up to 3 Inch. All jaws are replaceable. The entire vise also swivels a full 360 degrees and can be securely locked in any position. Adjustment screw is fully protected in work area by steel cylindrical enclosure. Ductile iron castings have an orange powder coated finish with a large smoothly finished anvil area and all hardware is bright plated steel. This vise has a 5 inch jaw width, 3-3/8 inch maximum opening capacity, 3-1/2 inch throat depth and 35 pound weight. The Chicago based Pony Tools Inc. (formerly known as Adjustable Clamp Co.) which was established in 1903 is the manufacturer of all Pony and Jorgensen products. The Pony Multi Purpose Bench Vises are imported from China.

• 3-3/8 inch opening capacity
• 5 inch jaw width
• 3-1/2 inch throat depth
• Three different styles of jaws can be rotated 360 degrees to any work position and securely locked
• The entire vise swivels a full 360 degrees and can be securely locked in any position

User questions & answers

Question:	How far apart are the mounting holes
Answer:	Hello, This vise has a 5” opening capacity, 5” jaw width and 2 5/8”throat depth. Hope this helps. - Your Pony Jorgensen Team
Question:	Its a 5" vice with 3.3" opening capacity--why not
Answer:	no it does not
Question:	Does it include mounting bolts
Answer:	yes it does
Question:	Does it have two lock down screws
Answer:	1 Holds downs as photo.

Product description

41012 Type: Nut Continuous (part# 41012) This item features: -Jaw Width: 4 in. -Jaw Opening: 12 in [Max]. -Jaw Material: Steel. -Material: Cast Iron. -Locking Type: Threaded. -Type: Woodworking Vise. -Price is for 1 Each.

This heavy-duty woodworker's vise from Jorgensen features a solid-steel dog in the front jaw which, when used in conjunction with a bench stop, allows oversized work to be held securely on the bench top. The machined toed-in jaw provides a solid grip, while northern hardwood handles provide balance and comfort. The front and back jaws have holes drilled in them to allow for optional wood facings (not included). This vise will easily fit any bench up to three-inches thick. Jaw size: 3-1/2 by 10 inches, with 12-inch maximum opening capacity. For a smaller version of the same vise, see Jorgensen's model #40709A.--Josh Dettweiler

What's in the Box

Vise, wood handle

From the Manufacturer

Unequaled in quality, Jorgensen's heavy-duty Woodworker's Vise features a solid-steel dog in the front jaw that, when used in conjunction with a bench stop, holds oversized material more securely than any vise in its class. Machined, toed-in jaws provide a solid grip while northern hardwood handles ensure balance and comfort. The front and back jaws have drilled, tapped, and countersunk holes for working with various wood facings. The vise easily fits any bench up to 3-inches thick. Jaw size: 3-1/2 by 10 inches with 12-inch maximum opening capacity.

• Bench vise with solid-steel dog and toed-in jaw
• For woodworking projects
• Jaws drilled for optional wood facings (not included)
• Northern hardwood handle
• 3-1/2-by-10-Inch jaw size with 12-Inch maximum opening

User questions & answers

Question:	My wooden handle diameter is smaller than the end caps? What do I do to not make it slip out? Am I supposed to shim/glue the end caps to the handle
Answer:	The handle is steel. Thank you for pointing out the incorrect information in the description.
Question:	The product photo does not show a wood handle, but the description states that the handle is wood. which one is correct
Answer:	From the back of the rear vise jaw to the end of the whole mechanism with the vice closed and 3/4" ( 1-1/2"total ) wooden jaws installed is approximately 16-1/2" to 17"
Question:	How much depth is needed for the vise screw and parallel rods from the edge of the bench
Answer:	As of May 2016, Pony/Jorgensen is owned by GreatStar Industrial, based in Hangzhou, China, so Jorgensen vises are probably no longer made in the USA.
Question:	Is this made in USA
Answer:	The four ½” holes are 4 7/8” apart as measured on-center.

Product description

This item is Pony 26545 4-1/2-inch x 6-1/2-inch light duty woodworker's vise. Used for Handtools & tool organizers, Vices. The product is manufactured in china.

• This item is Pony 26545 4-1/2-Inch x 6-1/2-Inch Light Duty Woodworker's Vise
• Used for Handtools & Tool Organizers, Vices
• The produt is manufactured in China
• 4-1/2 inch opening capacity
• 6-1/2 inch jaw width
• 4-1/2 inch opening capacity
• 6-1/2 inch jaw width

Product description

The Pony Drill Press Vise is designed for the home workshop or professional work shop. This vise has two slots along each side for ease of mounting to any drill press. Malleable cast iron with orange powered coated finish. The 4 inch opening capacity will allow the user to clamp a wide range of products for safe drilling. The replaceable steel jaws are 4 inch wide and have a throat depth of 1/2 inch. The Chicago based Pony Tools Inc. (formerly known as Adjustable Clamp Co.) which was established in 1903 is the manufacturer of all Pony and Jorgensen products. The Pony Style 29000 vises are imported from China.

• Mounts to any drill press
• 4 inch opening capacity
• 4 inch jaw width
• 1/2 inch throat depth
• Malleable cast iron with orange powered coated finish

Product description

The Pony Quick Release Vise is designed for quick opening and closing. The quick release lever disengages the screw so you can position the work with one hand while quickly opening or closing the vise with the other. Adjust the lever again then the screw engages so you can close or open vise with steel handle. Heavy duty design for the toughest applications. Heavy cold-formed steel channel beams cover and protect the screw of this vise and adds to its great strength. It features an orange powder coated finish, 360 degree swivel base with dual lock nuts, replaceable hardened steel serrated jaw faces, ground and polished anvil, replaceable steel pipe jaws, large forming horn, 5 inch opening capacity, 5 inch jaw width, 3 inch throat depth, 1/2 inch to 1-1/2 inch pipe jaw capacity and 37 pound weight. The Chicago based Pony Tools Inc. (formerly known as Adjustable Clamp Co.) which was established in 1903 is the manufacturer of all Pony and Jorgensen products. The Pony Quick Release Vises are imported from China.

• The quick release lever disengages the screw for quick opening and closing
• 5 inch opening capacity
• 5 inch jaw width
• 3 inch throat depth
• 1/2 inch to 1-1/2 inch pipe jaw capacity

Product description

Pony 13025 3-Inch Light Duty Clamp On Vise is designed for light duty home, shop and professional use. It is fully portable, yet mounts easily and securely on edges up to 2-inches thick. Features: 3-inch jaw width, 2-1/2 inch opening capacity, plated steel screw and handle, steel double guide bars allow smooth operation, orange baked enamel finish prevents rusting, cast pipe jaws holds round pipe. The Chicago based Pony Tools Inc. (formerly doing business as Adjustable Clamp Company) which was established in 1903 is the manufacturer of all Pony Vises. Our Pony Vises are made in China.

Every workshop needs at least one vise, and Pony's incredible clamp-on vise is perfect. It's completely portable and clamps onto any table up to 2 inches thick. The sliding handle turns like a charm, and you're set. For such an incredibly inexpensive vise, the jaws are really wide, and they even have a serrated surface, with an open capacity of a full 2-1/2 inches. We can think of a thousand uses for such a handy device. It's like an extra hand whenever and wherever you need it. Pony's earned its reputation as a maker of fine clamps, so you know anything in the distinctive bright orange color will do right by you. This is no exception.--Kris Jensen-Van Heste

From the Manufacturer

Professionals and do-it-yourselfers alike will appreciate the steadfast clamping power, precision, and smooth operation of the Pony Light-Duty Clamp-on Vise. Serrated jaws grip tight, while steel-plated dual guide bars ensure straight and flush clamping, every time. A sliding pin-handle lets you twist quickly when centered, or slides to let you use the whole pin length for cranking leverage when you need to really bear down on the material. A lower clamp secures the whole vise to worktables up to two inches thick. Grey iron castings with orange baked-enamel finish mean longer tool life. Stronger than comparable vises, this Pony Vise is economical, too.

FEATURES

• 2-1/2-inch jaw opening capacity for holding a variety of materials
• Three-inch, serrated jaws for steadfast clamping
• Table clamp mounts solidly on worktables up to 2 inches thick
• Double guide bars for positive clamping
• Made with plated steel for longer tool life

SPECIFICATIONS

• Opening Capacity 2-1/2"
• Jaw Width 3"
• Table thickness up to 2"

• This item is Pony 13025 3-Inch Light Duty Clamp On Vise
• Used for Handtools & Tool Organizers, Clamps
• The product is manufactured in China
• 3-inch jaw width
• 2-1/2 inch opening capacity
• Mounts easily and securely on edges up to 2-inches thick
• Plated steel screw and handle
• Steel double guide bars allow smooth operation

User questions & answers

Question:	I want to use it to put on golf grips on the golf shaft. Will it hold the shaft securely so I can push the grips on it
Answer:	You should be able to. It would attach just like a C clamp would. You might want to put something where you are going to clamp it to prevent marring.
Question:	Can I clamp this on my breakfast table
Answer:	The jaws on mine are 2 7/8" wide. The clamp base opens to just a hair over 2".
Question:	Is the clamp openig a TRUE 2"? My bench is exactly
Answer:	That is the primary reason I bought this vice. I used it to build an upper and lower. It works fine for this purpose.
Question:	Anybody use it to build an AR15 upper
Answer:	Put a few wraps of masking tape around the end of the handle to make a sliding friction fit, then put a little wood glue on the lip of the inside of the cap and slide it on. Done. Forever.

Product description

Product DescriptionThe IRWIN Tools 2026306 4-1/2" Bench Vise features hardened steel jaw faces with cast iron pipe jaws and large forming horn. Cast iron body with blue enamel finish. Ground and polished anvil, 4-1/2'' jaw width, 4-1/2 jaw opening. Captured safety jaw to prevent slide from falling out Fused steel handle Anvil incorporated Integrated pipe jaws - Manufacturer: Irwin Tools.From the ManufacturerPony Tools 4-1/2in. Light Duty Bench Vise with Swivel Base. Consider the Pony light-duty bench vise with swivel base for your light-duty home, shop and professional use. These vises feature rugged strength you'd usually have to spend more for. With square four-hole swivel bases, sturdy steel jaw faces, ground and polished anvils, permanent pipe jaws, forming horns. Exhibits rugged strength usually found in more expensive vises. Lock-nuts allow the vise to swivel a minimum of 270 degree on its base. 4-1/2-inch jaw with 4-1/2-inch maximum opening capacity. Casting has orange baked-enamel finish, all hardware plated-steel.

From the Manufacturer

Pony Tools 4-1/2in. Light Duty Bench Vise with Swivel Base. Consider the Pony light-duty bench vise with swivel base for your light-duty home, shop and professional use. These vises feature rugged strength you'd usually have to spend more for. With square four-hole swivel bases, sturdy steel jaw faces, ground and polished anvils, permanent pipe jaws, forming horns. Exhibits rugged strength usually found in more expensive vises. Lock-nuts allow the vise to swivel a minimum of 270 degree on its base. 4-1/2-inch jaw with 4-1/2-inch maximum opening capacity. Casting has orange baked-enamel finish, all hardware plated-steel.

• Consider the Pony light-duty bench vise with swivel base for your light-duty home, shop and professional use
• These vises feature rugged strength you'd usually have to spend more for
• With square four-hole swivel bases, sturdy steel jaw faces, ground and polished anvils, permanent pipe jaws, forming horns
• Exhibits rugged strength usually found in more expensive vises
• Lock-nuts allow the vise to swivel a minimum of 270 degree on its base
• 4-1/2-inch jaw with 4-1/2-inch maximum opening capacity
• Swivels a minimum of 270 degrees on square four-hole base

Product description

The Pony Style 29000 vises are an economically price and are an alternative to heavier duty bench vises but greater in strength than light-duty vises. These vises feature swivel bases with a lock down-nut, replaceable hardened-steel serrated jaws faces, large ground and polished anvils, permanent pipe jaws and large forming horns. The Pony 29060 features: 6 inch opening capacity, 6 inch jaw width, 3 inch throat depth, 3/4 inch to 2 inch pipe jaw capacity and 43 pound weight. The Chicago based Pony Tools Inc. (formerly known as Adjustable Clamp Co.) which was established in 1903 is the manufacturer of all Pony and Jorgensen products. The Pony Style 29000 vises are imported from China.

• 6 inch opening capacity
• 6 inch jaw width
• 3 inch throat depth
• 3/4 inch to 2 inch pipe jaw capacity
• Swivel base with lock-nut