14 best chisel hammers

Product description

The Sure Strike drilling hammer from Estwing, has a forged steel blue painted head which is hardened and tempered. Both faces are fully polished. Designed for striking cold chisels, brick chisels, punches, star drills, spikes and hardened nails. Both faces are beveled. This drilling hammer has an 11 in. jacketed and textured yellow fiberglass handle which allows for heavier blows in an environment where there is limited swing. A strong reliable tool you can count on. Protect your eyes from flying particles and dust. Always wear safety goggles. Bystanders shall also wear safety goggles.

From the Manufacturer

The Sure Strike line of fiberglass tools from Estwing has forged steel heads with fiberglass handles for strong reliable tools you can count on.

• FORGED STEEL HEAD – Maximum strength and durability for a lifetime of hard work
• BALANCE AND TEMPER – The most durable, longest lasting striking tools available
• HEAVY HITTING HAMMER – Perfectly balanced to deliver powerful blows with an easy swing
• FIBERGLASS HANDLE – Lightweight, durable handle offers a comfortable controlled swing with a ribbed grip to prevent slips
• VERSATILITY ON THE JOB – Use with chisels, punches, star drills, hardened nails & more

User questions & answers

Question:	Can I use this to tear through drywall etc on rehab property
Answer:	I find that the more I’ve used it, the less effective it has become for this purpose. Either I’m getting better at detecting nails, or worse at appendages. This is odd considering I’m all thumbs.
Question:	Would this be good for chizzles
Answer:	As treatment technologies differ, we recommend you check with your stylist before using our products. If you ever have any other questions regarding this product please do not hesitate to use the "Contact Us" page on our website!
Question:	Is this the same thing at a sledge hammer
Answer:	Great question! This Tresemme Keratin Smooth Flat Iron Smoothing Spray is a heat protection spray that helps shield hair from heat up to 450°f so you can achieve a smooth look while protecting your hair from heat styling. We hope this helps.
Question:	made in china
Answer:	No, it's not a spray. It squirts out of the top like lotion or body wash.

Product features

Estwing Surestrike Drilling Hammer

Since 1923, the Estwing has taken pride in designing and manufacturing the world's most durable, comfortable and attractive striking and struck tools. All claw hammers, axes, specialty tools and pry bars are manufactured to the highest possible standards and offer a true value to both tradesmen and craftsmen alike.

Estwing continues to innovate and produce new handtools. Our engineers work continually to create the most revolutionary and long lasting hand tools on the market.

Forged Perfection

The heavy-duty forged steel head provides maximum strength and durability for a lifetime of hard work.

Fiberglass Handle

Lightweight, durable handle offers a comfortable controlled swing with a ribbed grip to prevent slips.

Balance and Temper

Among the most durable, longest-lasting striking tools available.

Available in 2 Sizes

The Estwing Drilling Hammer comes in both a 3 lb version and 2 lb version.

Product description

Medium barrel length with built-in power regulator, professional touch trigger. Designed for exhaust work, cutting metals, chipping and scraping surfaces. Specs: Delivers 3,500 BPM., 11/16" bore diameter, 2-5/8" stroke length, 4 CFM, 1/4" air inlet, 3/8" minimum hose size. Includes chisel shank size .401.

The Ingersoll Rand 114GQC standard-duty air hammer is handy whether you're cutting panels, fixing exhaust systems, or making general repairs. Powered by compressed air, this tool delivers a 2-5/8-inch stroke and 3,500 blows per minute (BPM) and is equipped with a quick-change retainer that makes it easy to swap chisels. Its rugged design sports an alloyed steel barrel and a heat-treated piston. A three-piece chisel set is included.

Efficient Design with Quick-Change Retainer

Delivering a 2-5/8-inch stroke and 3,500 BPM, and designed for maximum efficiency, the Ingersoll Rand 114GQC standard-duty air hammer is great for cutting metals, chipping and scraping surfaces, and working on exhaust systems. A quick-disconnect retainer allows you to change chisels quickly and easily so you can finish jobs faster.

Lightweight Yet Sturdy Construction

Like all of Ingersoll Rand's Edge series impactools, the 114GQC standard-duty air hammer is exceptionally rugged, compact, and lightweight. It comes equipped with a medium-length, alloyed steel barrel for a longer life and is powered by a heat-treated piston. Other highlights include a built-in power regulator, a professional touch trigger, a 0.401-inch shank, and a diffused exhaust at the bottom of the handle.

Award-Winning Ergonomic Design

The Ingersoll Rand 114GQC standard-duty air hammer features an award-winning ergonomic design that delivers exceptional torque accuracy along with increased productivity and safety. The tool's contoured grip offers greater comfort while you're working.

This product measures 8.5 inches long and weighs 4.1 pounds. Included is a three-piece chisel set featuring a tapered punch, a panel cutter, and a flat chisel.

About Ingersoll Rand

Ingersoll Rand is a global, diversified firm providing products, services, and solutions to enhance the quality and comfort of air in homes and buildings, transport and protect food and perishables, secure homes and commercial properties, and increase industrial productivity and efficiency. Driven by a 100-year-old tradition of technological innovation, Ingersoll Rand enables its customers to create progress and a positive impact in their world.

What's in the Box

Ingersoll Rand 114GQC standard-duty air hammer and a chisel set containing a tapered punch, panel cutter, and flat chisel.

From the Manufacturer

The economic air hammer for fast cutting action, especially for medium exhaust system, panel cutting, and general repair work. Part of Ingersoll Rand's Edge Series line of air tools: legendary performance at an affordable price.

• Includes 3-piece chisel set
• Quick change chisel retainer
• Longer life alloyed steel barrel and heat-treated piston
• Diffused handle exhaust
• Ergonomic grip

User questions & answers

Question:	Can it be used on tie rods and ball joints
Answer:	Yes, has plenty of power to handle suspension parts.
Question:	Where is it made
Answer:	This Ingersoll Rand Air Hammer and Chisel Set is made in Taiwan.
Question:	How do I assemble it out of the box? This is my first air hammer and it doesn't tell me anything in the printed materials
Answer:	The "tip" if you will is basically a quick (dis)connect attachment for the tips that came with it. Put that on and use the allen screws built into it to tighten it really good. Then you just grab it and slide it down towards the hammer itself, which allows you to insert the tips, then let go and they should be locked in. They won't be locked in tight, because otherwise the hammer isn't able to do it's job and move them, but you should be unable to pull them back out without sliding down the collar again.
Question:	I've got a 2cfm @ 90 psi porter cable compressor. will that be sufficient to power this tool enough to loosen the fan clutch (3 seconds?)on my truck
Answer:	Nope it will not. The specs say "average consumption 4cfm." This means at zero load basically holding it in your hand and pulling the trigger it'll use 4cfm at 90psi. Under load like chiseling out a stuck wheel bearing I've measured mine using 15cfm at 90psi. My 80 gallon continuous duty Ingersoll Rand compressor runs it fine but it's 7.5hp at 240v and is rated for 20cfm at 175psi which I regulate down to 90. My Ingersoll Rand gas powered dual tank "contractor" compressor barely runs it at 11cfm at 90psi. The truck bed mounted gas compressor is the only other one that runs it very well. Manufacturers will never tell you what tools use under load and will deceive the uninformed with specs like "average cfm consumption". I'm not knocking Ingersoll though as they have top notch products it's an industry practice / standard.

Product features

Ingersoll Rand Edge Series 114GQC Quick Change Air Hammer

This standard-duty air hammer is handy whether you're cutting panels, fixing exhaust systems, or making general repairs. Powered by compressed air, this tool delivers a 2-5/8-inch stroke and 3,500 blows per minute (BPM) and is equipped with a quick-change retainer that makes it easy to swap chisels. Its rugged design sports an alloyed steel barrel and a heat-treated piston.

Product Advantages

- Includes 3 piece chisel set featuring a tapered punch, a panel cutter, and a flat chisel.

- Efficient design with quick-change chisel retainer that allows you to change chisels quickly and easily

- Longer life alloyed steel barrel and heat-treated piston

- Diffused handle exhaust

- Award-Winning ergonomic grip that offers greater comfort while your're working

Efficient Design with Quick-Change Retainer

Delivering a 2-5/8-inch stroke and 3,500 BPM, and designed for maximum efficiency, the Ingersoll Rand 114GQC standard-duty air hammer is great for cutting metals, chipping and scraping surfaces, and working on exhaust systems. A quick-disconnect retainer allows you to change chisels quickly and easily so you can finish jobs faster.

Award-Winning Ergonomic Design

The Ingersoll Rand 114GQC standard-duty air hammer features an award-winning ergonomic design that delivers exceptional torque accuracy along with increased productivity and safety. The tool's contoured grip offers greater comfort while you're working.

Lightweight Yet Sturdy Construction

Like all of Ingersoll Rand's Edge series impactools, the 114GQC standard-duty air hammer is exceptionally rugged, compact, and lightweight. It comes equipped with a medium-length, alloyed steel barrel for a longer life and is powered by a heat-treated piston. Other highlights include a built-in power regulator, a professional touch trigger, a 0.401-inch shank, and a diffused exhaust at the bottom of the handle.

About Ingersoll Rand

Ingersoll Rand has stood at the vanguard of industrial innovation for over 100 year. From air compressor systems to power tools and beyond, the company manufactures products that offer best-in-class quality, reliability, durability, and performance. Ingersoll Rand is also deeply committed to building a better future. At every level of business, the company promotes environmentally sound practices to achieve progress that is truly sustainable. With offices and plants across the globe, Ingersoll Rand strives to meet the world's growing need for clean and comfortable air, safe and fresh food, energy efficiency, and sustainability.

Product description

This Wood Is Good 18-Ounce Mallet is guaranteed unbreakable. The head is made of a tough urethane material designed to be quiet and yet able to transmit the maximum blow to the tool. The handle is beautifully turned out of selected New England hardwood and is polish sanded. Urethane head is 2-3/4-inch diameter. Made in USA

• Guaranteed unbreakable
• Quiet yet transmit maximum blow
• Made in USA

User questions & answers

Question:	Can this be used for jointing pieces together
Answer:	I've never used it for that. I'd use something a bit more solid though.
Question:	Is this mallet offered in left handed model
Answer:	In my opinion the 12oz. If your carving entails to do precise (fine) detailing, the 18oz will begin to hurt your hand. I find that the the heavier the mallet you have a tendency to hold it tight. With the 12oz your hand will be more relaxed & use it for longer and most importantly better control. It is a well balanced tool.
Question:	Can this mallet be used for batoning a froe or is there a better option
Answer:	The plastic part is brown.
Question:	What size mallet (12 or 18oz) is best for woodcarving 1x2 foot designs using "standard" to "intermediate" tools
Answer:	I believe nothing is impossible, but I think it would be easier to extend the legs or add padding to the bottom neither of which is a really good solution

Product description

EFFICERE 22 Oz. Rock Pick Hammer is a must-have tool for contractors, campers, hunters, prospectors, geologists, archaeologists and paleontologists. It is perfect for breaking and chipping bricks / concrete / stones / rocks in masonry construction, prospecting, mining, geologizing and a lot more industries. Featuring a square striking face on one end and a sharp pointed tip on the other end, this hammer can also be used as an emergency hammer to break vehicle glasses. Made from hardened and forged alloy steel for dependable strength, the head and handle are designed in single piece construction that will never loosen over time. Its ergonomic anti-shock and anti-slip soft rubber grip gives you more comfort and control during use.

• An essential tool for contractor, camper, hunter, prospector, geologist, archaeologist, paleontologist, and is perfect for breaking and chipping brick / concrete / stone / rock in masonry construction, prospecting, mining and geologizing
• Specially engineered 22-oz. head weight and 11-in. overall length with perfect balance and power-to-weight ratio increase swing speed and multiply striking power
• Drop forged one-piece all steel head-handle construction with fully polished finish and additional rust-preventative clear coating for maximum strength and durability
• Precisely machined square striking face on one side and a sharp pointed tip on the other side for versatile applications
• Ergonomically designed anti-shock and anti-slip soft rubber grip for more comfort and control during use

User questions & answers

Question:	Chrome extension wecultivate says only that the seller is in ca. where are these made
Answer:	Its a rock hammer. Hand held perfect size and price was right That question made no sense
Question:	is it one piece or is the handle welded to the head
Answer:	I used a cheap brick hammer in Utah on my vacation and it was ok for a couple of hours and then the rocks started to win as they reshaped the striking surfaces. You need a hardened steel hammer for hard rocks. Drop Forged is meaningless unless it is also hardened steel. Take my advice, spend the money on a true hardened steel hammer. I ordered this one and it was so poorly forged that I returned it right away. It was a long way from "precision" so I'm also guessing the steel is a long way from "hardened".
Question:	Is this food die shaping raw crystals
Answer:	Hi,Instruction cards included are to leave the gel in place 20-30 minutes. That's conservative because people tend to have varying tolerance to the whitening gel. The 44% carbamide peroxide whitening gel is the strongest concentration available so it's important to apply a very small amount of whitening gel into dental trays. The gel will expand once activated and provide ample teeth coverage. Any excessive amount applied will allow gel to remain suspended on gums causing the potential for irritation. The instructions go on to state "Extending treatment times may be done depending on tooth sensitivity." The longer the gel is left on the more whitening results. But after about 45 minutes to an hour, the gel has usually dissipated to the point where added whitening benefit is marginal. But in general, it is at the discretion of the user how long to keep gel applied once you are comfortable with treatments, etc.
Question:	Will it stand up to hobby rockhounding use on granite and basalt
Answer:	I believe it recommends 45 minute treatments, but not sure of duration of days? Your gums will get very sensitive if overuse of the product so need to follow recommended directions, product definitely works😁

• ALL-in-ONE: This multifunctional 6-piece chisel set includes a tile chisel, grooving chisel, scrapping chisel, flat chisel, point chisel, and scaling chisel so that you're ready to work on any material from ceramic tile to concrete, brick and masonry to real and artificial stone, even granite
• SDS PLUS SHANKS: These drill bits slot perfectly into your SDS Plus hammer drill regardless of manufacturer, whether Bosch, DeWalt, Makita, Milwaukee, Hilti, or other
• NON-SLIP: Our handles are crafted for tight non-slip use, with powerful torsion resistence to give you a longed service life even under punishing use
• HEAVY-DUTY: This SDS Plus drill bit set is made from high-quality chromium steel that has been drop forged and then heat tempered to give you strength and long-term corrosion resistance
• SATISFACTION GUARANTEED: Order with peace of mind, thanks to CO-Z's strong warranty and friendly 24/7 customer service

User questions & answers

Question:	What is the diameter of the shank
Answer:	One unit to do all three if you. are sharp enough to understand it ,otherwise save your money ,like I didn’t !!,
Question:	Will these work in a dch133b rotary hammer drill
Answer:	I tried to use it for Schmetz microtex 8/60 needle and after half an hour or more I have to changed the needle to 10/70 (I was using gutterman 100% polyester) and it was ok
Question:	Will these work for a Milwaukee better hammer drill
Answer:	Using this threader certainly doesn't require clearly seeing thing as fine as thread and the thin aluminum wire of the traditional threader. But I have two concerns: (1) I believe this threader is intended for threading sewing machine needles so it wouldn't be of much use for ordinary sewing needles; and (2) if one's eyesight is bad enough, one might have to depend a great deal on the sense of touch to position the thread correctly and the position the threader properly against the sewing machine needle, and that could be tricky for an older person whose manual dexterity and tactile senses are diminished. Something that has a more automated operation would probably be better, e.g., the Infila Auto Needle Threader sold on Amazon: http://www.amazon.com/MAGNIFYING-AIDS-Infila-Needle-Threader/dp/B001D1KLHC/ref=sr_1_20?ie=UTF8&qid=1407271931&sr=8-20&keywords=needle+threader
Question:	Where are these made
Answer:	This device does TWO things; a) holds sewing needle so it's easier to change the needle, and b) helps thread the needle after it's in the machine. Therefore, it is a "needle inserted & threader."

Product description

Svarog Air Hammer Chisel, 3-inch Wide Pneumatic Chisel Bit with 0.401 Inch Shank, Compatible with standard air hammers like Ingersoll Rand Air Hammer, Chicago Pneumatic Hammer and DEWALT Air Chisel Hammer, etc

Specification:

Length: 7.5 Inch

Chisel cutting edge: 3 Inch

Material: High quality drop forged tempered steel

Shank: 0.401 inch shank for air hammers

Compatibility: Compatible with standard 0.401 inch shank air hammers, like Ingersoll Rand Air Hammer, Chicago Pneumatic Hammer and DEWALT Air Chisel Hammer, etc

Ideal for following tough jobs application:

Construction adhesive

Laminate wood flooring

Stubborn thinset removal

Remove wall old tiles

Ceramic tiles

Garage floor tiles

Removing the cement

Remove bathroom tiles

Remove kitchen tiles

Floor surface prep

Floor glue

Concrete chisel

Floor tiles glue

Mortar removal

• Compatible with standard air hammer (0.401 inch shank)
• Extra Wide 3 inch edge to increase thinset removal efficiency
• Made of drop forged tempered steel for high impact stresses
• Ideal scraper tool for tile, thinset, plaster, mortar, glue and other stubborn adhesives
• Widely used for home renovation and compatible with Ingersoll Rand Air Hammer, Chicago Pneumatic Hammer and DEWALT Air Chisel Hammer

User questions & answers

Question:	Will this fit Ingersoll Rand hammers
Answer:	yes, it fits a standard 0.401 in air hammer
Question:	Does it fit sds plus hammer drills
Answer:	no, this is a air hammer bit

Product description

Ideal for muffler and pipe removal, body shop work, shock work scraping rust, and light front-end work.

• Built in regulator to match speed to the job
• Four round chisels-Include ripper, bolt cutter flat and tapered punch chisels
• Alloyed steel barrel and heat-treated piston for longer life

User questions & answers

Question:	I used it for about 5 minutes and it is just blowing air and not stroking. What is wrong with to
Answer:	Did you try tightening the end where it screws into the green main housing. Also some air oil after prolonged use helps lube everything up.
Question:	does it come with X4 chisels and a needle kit ? Or just the bare gun
Answer:	It comes with the 4 chisels and the spring, no needle kit that I recall.
Question:	Is this powerful enough to hammer out a ball joint
Answer:	Yes but it was a cheap tool only lasted 6 months
Question:	How many blows per minute does the tool operate at? Also how long are the strokes in inches
Answer:	The stroke can be approx.. 1/8 to 1/2 depending on the pressure you exert and I would guess over 1000 strokes per min. [ just my guess]

• PREMIUM MATERIAL: Drop forged chrome-vanadium steel blade for durability and heat treated for edge retention
• EDGE: Bevel Edge for woodworking carving multi-purpose use, suitable for all soft wood, hard wood and laminated wood products
• SIZE: Comes with sizes: 1/4",1/2'', 3/4'', 1'', full length blade guard for added safety
• HANDLE: PVC Colored Transparent High Impact Handle
• SURFACE TREATING: Lacquer Coating Protects and Lubricates Blade for Smooth Cutting

User questions & answers

Question:	Is it made in the usa
Answer:	I don't think that it would because it just fits the 38.2 yds with only a mm or two to spare. Take care, -Eric
Question:	does it come in some sort of packet to keep them together
Answer:	YES. This brand of shipping tape does secure Shipping Labels.
Question:	what angle are these set at
Answer:	Yes, the dispenser and tape come as a unit.
Question:	Are these Made in China
Answer:	This dispenser can be refilled with any of our Scotch™ Brand Packaging tapes that are on a three inch core. Thanks for asking!

Product features

Hurricane 4 Pieces Wood Chisel Set Cr-V Construction for Woodworking Carving PVC High Impact Handle

Our sole focus is to build high quality tools at an incredible value，so you spend more time working and less time tuning up.

We are in business to bring affordable dependability to the world of tools.

Wood Chisel of 4 Piece Set, Perfect for a range of woodworking tasks around the home or workshop

Drop Forged Chrome Vanadium Steel blades have a greater sharpness that ensures superior performance, so you spend more time working and less time tuning up.

4 Piece Chisel Set

You will get 4 pieces high-grade chrome vanadium steel wood chisel set - 1/4",1/2'', 3/4'', 1''. The narrow side bevels design will allow you to flatten and sharp with quickness and precision.

Additional Feature:

Finely honed heat-treated cutting edge for long lasting sharpness and no chipping

Bevel Blades

Bevel Edge for woodworking carving multi-purpose use, suitable for - All soft wood, hard wood and laminated wood products

PVC Colored Transparent High Impact Handle

Design for use with the palm of the hand, a wooden mallet or a claw hammer.

Protection Cover

4 Protective Caps, one for each chisel.

Keep the blades sharp for a long time and also prevent any accidental cutting scenario

Product description

Tested to withstand the harshest environments, Ingersoll Rand is proud to offer pneumatic hammer chisels kits.All chisels are built from high-quality steel for the utmost in quality, strength, and durability. This 5-piece set includes the following chisels: tapered punch, Flat chisel, panel Cutter, sheet metal cutter, spot weld Breaker.; pair with your Ingersoll Rand 114Gqc edge Series air hammer.

• Built from high quality steel
• 5-Piece set includes tapered punch, flat chisel, panel cutter, sheet metal cutter and spot weld breaker
• Pair with Ingersoll Rand 114Gqc air hammer
• Item Package Dimension: 8.1" L x 6.6" W x 1.0" H

User questions & answers

Question:	What length are they
Answer:	Just the Air Hammer with mine!!
Question:	Does it fit a
Answer:	3/8 hose and 1/4 npt fittings should be ample air supply at 90 lbs. have you tried lubricating the tool?

Product description

Features:

Material: alloy steel

Type: hammer bits



Sizes:

-- Oval-shaped Air Hammer bit: 176 * 25mm (6.93 * 0.98 inch)

-- 2 Pcs Flat Head Air Hammer bits: 100 * 30mm (4.0* 1.18 inch); 80 * 35mm (3.14 * 1.37 inch)

-- Spring: 28* 26mm (1.10* 1.02 inch)



Package included:

3x Hammer bits

1x Spring



Note:

1.Please allow 1-2cm errors due to manual measurement.

2.The head of the hammer bits include corve and flat head.

3.Due to the different image angles, some images may not display of the clear head shape, please understand, thank you!

（The longest hammer head is spherical shape,others hammer is flat shape.）

4. The bit installed in the pneumatic sewing machine, need to connect the air compressor to use.can replace the head to use.

• Package included: 3 air hammer bits and a spring.
• Suitable for tire repair, wind pipe seam, crushing hard rock, etc
• Air hammer flat drill is suitable for pneumatic rivet hammer, 150mm, 190mm, 250mm air gun air hammer and shovel
• Oval-shaped/ Spherical and flat head surface for the formation of metal plates, rivets, knock out and so on. Different shapes can adapt to different jobs
• Heavy duty air hammer fittings are made of high quality alloy steel with the necessary hardness and durability

Product description

Japanese hammer

User questions & answers

Question:	Is the handle made of white oak or? Additionally, does the handle have the traditional curve to it, the picture seems to make it look straight
Answer:	Well, it is a tool produced in the US, with some cheaper tools produced in China. Since their biggest market is the US, they state their tool measurements in inches. So this 1/8" chisel is in fact 3.175 mm. I presume they omit the 0.175 mm in order to make the product description a bit more appealing ;)
Question:	Do you sell the heavier hammers
Answer:	Yes
Question:	what is the head made of
Answer:	Yes it does.
Question:	Does this hammer have a domed face
Answer:	Hello, it is non toxic and bpa free, the lining is made of PEVA

Product description

CBTONE SDS-Max Hammer Drill Chisel Set - High-grade 40RC steel and optimum hardening process guarantee long service life and consistent quality.

Point chisel for demolishing concrete slabs, brick, mortar, slate, masonry, and all different types of stones;

Flat Chisel for removing and drilling edges, chips, scales or channels concrete, stone, masonry and brick;

Scaling Chisel for removing scale, rust, concrete, masonry, brick, and stones or removes LARGE quantities of other tough material.

Package Included:

2 x SDS Max pointed chisel 280 mm(11 inch)

2 x SDS Max flat chisel 25 x 280 mm(1 X 11 inch)

2 x SDS Max scaling chisel 50 x 250 mm(2 X 11inch)

• 6PCS 2 Set SDS Max Chisel Bit: 2PCS Point Chisel, 2PCS 25mm Flat Chisel, 2PCS 50mm Wide Chisel.
• Point Chisel Size: 11 inch (280mm); Flat Chisel: 1 X 11 inch (25 X 280mm); Wide Chisel: 2 X 11 inch (50 X 280mm).
• Thease chisel set made of premium 40RC steel, very sturdy for long using life. Ideal for chipping and breaking holes in concrete and masonry.
• Extra long & large size: 11-inch long chisels with SDS Max plug give strong impact on concrete, flooring and brickwork.
• Any product quality problems, please contact us at any time, 100% money back or refund guarantee, no questions asked!

Product description

Thorex nylon hammer



Patented metal head with screw-in nylon faces.

Available in a range of sizes from 1/2lb (1in face) to 5 1/2lb (2.1/2in face).



Diameter.38mm. (1.1/2in)

Weight. 675gr. (1.1/2lbs)

• Face diameter: 38mm 1.1/2in, Weight: 560g
• Fitted as standard with one White and one Soft Grey screw in Face with Wood Handle.
• Striking Material: Nylon

User questions & answers

Question:	Does the hard plastic head work for pounding in tent stakes
Answer:	They are nice and sturdy, we’ve had no issues so far.
Question:	Are replacement heads available
Answer:	Overall length - 14": Handle 9 3/4"; Working steel 4 3/4". Sharp, but not razor sharp. Large gouge has a flatter shape than others I have seen.Hope this helps.
Question:	Where is this hammer made? England
Answer:	Thank you for choosing Irwin. Our goal is to provide the highest quality service. At the cutting edge the chisel should be as square as any other of our chisels. It's possible that at the neck near the handle the bottom starts to round off on the corners but that's normal.
Question:	I wonder what ever happened to this hammer that got all of a sudden a price increase, i had in my cart for $16.95 (on 9/15/17) an now it's $29. why
Answer:	This is a single 1/8" chisel. It is a useful supplement the standard four (4) chisel set -- the smallest of which is 1/4".

Product description

Bosch offers a full assortment of SDS-Plus hammer steel points and chisels. Removes tiles at a faster rate with less effort. Flat Spade design creates a self-sharpening edge, eliminating downtime.

From the Manufacturer

Bosch offers a full assortment of SDS-plus hammer steel points and chisels.

• EFFICIENT: Removes material up to 40% quicker than conventional tile chisels with less effort.
• LIFE: Flat spade design creates a self-sharpening edge for more productivity than conventional chisels.
• FEATURES: Specially shaped for prying and removing tiles in one piece.
• COMPATIBLE: Designed for use with SDS-plus hammers.

User questions & answers

Question:	What is the size of the shank insert? I received a 5/8" by mistake and need one with a 3/8" shank
Answer:	Yes, from the O ring down is what is included in this piece. Just the stand in the back ground is not. Thank you
Question:	Does it work with bosch demolitio hamer sds
Answer:	no
Question:	does it have a slight bend in the profile
Answer:	yes
Question:	what is the size of this chisel
Answer:	Not sure. But as a suggestion you could cut a small piece of pipe or tubing and put the screw through it and allow it turn about the screw, this should work fine

Product features

About Us

The Bosch Group is supplier of technology. The Bosch Group comprises Robert Bosch GmbH and its more than 350 subsidiaries and regional companies in more than 60 countries.

Robert Bosch Tool Corporation in North America was formed in January 2003 when Robert Bosch GmbH combined its North American power tool and power tool accessory divisions into one organization.

Bosch celebrated its 125th anniversary in 2011.