10 best chipping hammer bits

• SDS MAX Shank (NOT COMPATIBLE WITH SDS PLUS)
• Come with 4 pcs extra screws for replacement, increase the service life
• High-grade forged and heat-treated steel for maximum durability
• Blade Wide: 6-Inch, Shank Length: 25-Inch
• Long sturdy metal chisel scraper. Great for any floor removing or renovation

User questions & answers

Question:	Can this to remove linoleum and adhesive
Answer:	I suggest you use very fine steel wool (0000) or a scotchbrite pad (gray) to buff down the gloss after your repair is hardened. It should roughen the surface just enough to matte it down.
Question:	Does it fit Bosch 11388 hammer
Answer:	The tube I had was of the consistency of thick paint; not quite as thick as caulk. When wiping off excess, you have to be careful not to dislodge the material in the crack; it comes out too easily! I found it best to let the compound set for a few hours and scrape the excess off the tiles using a single-edge razor blade (or box-cutter blade).
Question:	Can you use this to dig a thin trench into dirt with 22" deep? I wanted to install bamboo barrier
Answer:	yes
Question:	Can this be used to remove tile, or only the thinset once the tile is removed? Thanks
Answer:	You don't need special tools the break off the clips, you can kick it from the sides or knock it off from the sides with a hammer, make sure you don't hurt the tiles when you using a hammer.

Product features

Firecore Wide Tile Floor Scraper

The Firecore 6 inch Heavy Duty Floor Scraper is designed to work with SDS- Max Rotary or Demo Hammers in a variety of applications. The extra wide replaceable blade works for efficient material removal per pass. The drop forged tempered steel is designed specifically for high impact stresses. This wide tile scraper works great for scrapeing job, like removing Ceramic Tile, Thinset, Carpet, Epoxy, Vinyl and other dried stubborn adhesives removal, also in removing the glued down wood floors and hardwood floor.

SDS-MAX Shank

Compatible with Rotary or Demo Hammers which accept SDS-MAX shanks, like Bosch, Dewalt, Hitachi, Hilti, Makita, Milwaukee, etc.

NOTE: The SDS Max Floor Scraper will not fit SDS-Plus Rotary Hammer.

Bolts Loosen Issue:

NOTE: After continuous use for a period of time, the bolt may loosen due to vibration, which is a normal phenomenon, just tighten the bolts on blade again.

The bolts have a special threads design in order to become more tighter as you are tiding the nuts, the more the nuts are tighten, the tighten become, preventing the bolts to become loosed due vibrations.

Product description

KELBERT – PREMIUM QUALITY SDS PLUS FLOOR & WALL SCRAPER TOOL – FOCUS ON YOUR PROJECT AND WE’LL TAKE CARE OF THE REST (2020 EDITION)



“The blade is awesome! Very powerful and get gets the job done. Great for removing thin set during renovation and I would highly recommend it” -Customer Review



All you need to do is focus on getting the job done, and everything else will be taken care of by your trusted brand Kelbert. We are a fast growing company that provides different tools for renovation and home improvement. All our products are ergonomically designed and individually tested to meet our high standards.



WHY KELBERT?

Kelbert is an American company. Our story began with the goal to provide high quality products to everyone around the world. We also want to provide a good user experience and customer service for everyone. Our customer service team is friendly and responsible, so if you have any questions, concerns or suggestions, feel free to contact us. We would love to hear your valuable feedback.



KEY FEATURES & BENEFITS

✅ Premium Quality

✅ Maximum Durability

✅ Lightweight

✅ Easy to Assemble

✅ Versatile

✅ Multi-Purpose

✅ Extra Wide Blade

✅ Best Value for Your Money

✅ Risk-Free Guarantee



After reading all the benefits, you already know our SDS Plus Floor Scraper Tool by Kelbert is what you need. What are you waiting for? Scroll up and buy one now or buy one for a friend who needs it. Grab your chance now before our supply runs out.



Money Back Guarantee – For more information, scroll up.

• ✅ PREMIUM QUALITY MATERIAL FOR DURABILITY – For construction related tasks, it’s vital for your tools to be high-quality and durable over time. At Kelbert, all our premium quality SDS Plus Floor Scraper Tool are made of high grade hardened drop forged tempered heat-treated superior steel alloy for high impact stresses, long lasting life, and maximum durability.
• ✅ LIGHTWEIGHT & EASY TO ASSEMBLE – You want to make sure to let the tools do the work for you, and not the other way around. Our premium quality SDS Plus Floor Scraper Tool by Kelbert is super light weight and easy to use. It’s only less than 1 pound, so holding it is effortless, which increases work efficiency.
• ✅ VERSATILE & MULTI-PURPOSE – At Kelbert, we want to make sure all our tools are versatile and gets the job done no matter what you’re trying to accomplish. With the premium quality SDS Plus Floor Scraper Tool, you will be able to easily remove thinset, glue, mortar. linoleum and other difficult floor adhesives during renovation with minimal effort.
• ✅ EXTRA WIDE BLADE FOR MORE COVERAGE – Scraping thinset and floor adhesives can be a very long and grueling task. At Kelbert, we want to make your job a lot easier and faster to complete by making our floor scraper blade extra wide for more coverage and hard to reach materials. Our tools are ergonomically designed to allow users to get into tight areas for material removal.
• ✅ RISK-FREE GUARANTEE: Are you not convinced yet? We are so confident that our premium quality SDS Plus Floor Scraper by Kelbert will bring the best value for your work that we’re willing to offer you a risk-free money back guarantee. If you don’t like it, you can return the product and get your money back or we can offer a free replacement. We want to make sure our customers are 100% satisfied with our high-quality products. It’s time to get some work done!

User questions & answers

Question:	will this fit a Bosch chipping hammer
Answer:	5/8" is the size 11 threads per inch. There is an adapter you can get to thread into the bit and place in your drill. Garden hose on low will be fine.

Product description

ABOUT US:

-FYARES has been devoted to the development and production of drill bit technology for many years. Our products are all made of industrial grade materials, combined with unique quenching process and user-friendly design,the durable quality creates a better experience for you.



PRODUCT FEATURES:

-17PCS Drill Bits sets can be widely used in concrete, brick, stone and other hard materials

-The drill bits are made of industrial grade hard YG8 Carbide tip and steel body.

- The SDS shank design can match with most electric hammer drills on the market.



PRODUCT SPECIFICATIONS:

-Package Contains：17 x Drill Bits,1 x Storage Box

-Drill Bit Size：7/32X4",15/64x4",7/32x6",15/64x6,1/4x6",9/32x6",5/16x6",3/8x6",1/2x6",9/16x8",3/8x10",1/2x10",5/8x10".point chisel 9/16x10",groove chisel 9/16X10",flat chisel 9/16X10X7/8",9/16X10X1-1/2"



OUR SERVICE:

- If you have any problems while using our products. Just contact us by e-mail, we will contact you as soon as possible and solve your problem in time.

• WIDE RANGE OF USE: 17PCS Drill Bits sets can work on multiple materials, such as concrete,brick, stone and other hard materials, and can apply for carving, cutting, grinding and polishing.
• SUITABLE FOR HIGH-IMPACT WORK: The drill bits are made of industrial grade hard YG8C tip and steel body, more sharp and durable. Compared with percussion drills, it can effectively work on reinforced concrete and other materials, which is a more labor-saving choice.
• UNIVERSAL SDS SHANK CONNECTION: The SDS - PLUS shank design can match with most electric hammer drills on the market to meet your needs.
• CHOICE OF MULTIPLE SPECIFICATIONS: 7/32X4",15/64x4",7/32x6",15/64x6,1/4x6",9/32x6",5/16x6",3/8x6",1/2x6",9/16x8",3/8x10",1/2x10",5/8x10".point chisel 9/16x10",groove chisel 9/16x10",flat chisel 9/16x10x7/8",9/16x10x1-1/2"
• OUR SERVICE: Provide a storage plastic boxe for easy storage and carrying. If you have any problems while using our products. Despite contacting us by email, we will contact you as soon as possible and solve your problem in time.

Product description

Firecore F18375 3-inch wide machine sharpened tile & flooring adhesive remover with 0.401 in shank, Compatible with standard air hammers like, Dewalt Air Tools, Ingersoll Rand Air Hammer, IR Air, Milwaukee Air Hammer etc.

Specification:

Length: 7.5 Inch

Chisel cutting edge: 3 Inch

Material: High quality Chromium-Molybdenum steel

Shank: 0.401 inch shank for air hammers

Compatibility: Compatible with all standard 0.401 inch air hammers and air chisel hammers, including Ingersoll Rand Air Hammer, IR Air, Milwaukee Air Hammer and Dewalt Air Tools, etc

Ideal for following tough jobs in home renovation:

Stubborn thinset removal

Remove wall old tiles

Remove bathroom tiles

Remove kitchen tiles

Floor surface prep

Floor glue

Concrete chisel

Floor tiles glue

Mortar removal

Ceramic tiles

Construction adhesive

Laminate wood flooring

Garage floor tiles

Removing the cement

Removing tile from floors

• Universal air hammer bit, compatible with standard air hammer(0.401 in shank)
• Crafted with Chromium-Molybdenum steel for excellent blade sharpness retention and chisel strength
• Extra wide 3 inch edge, 7.5 inch length to increase thinset removal efficiency
• Widely used by professionals for home renovation and remodeling with Ingersoll Rand Air Hammer, IR Air, Milwaukee Air Hammer and Dewalt Air Tools
• Can be used as a grout removal tool, scaling chisel, adhesive remover, electric chisel for removes old tiles, stubborn thinset, glue, mortar and plaster

User questions & answers

Question:	Does this fit any air hammer
Answer:	It fits any standard angle grinder with a 5/8" -11 arbor. (Basically any angle grinder sold in the US market these days..some Makita grinders may still have 10mm. It wi not fit those.)
Question:	Does this work well to get tile and thin set off
Answer:	The blade mounts with four#2 philips head screws. This does require a special blade to do this though. Almost all flush cut and grind blades are interchangeable but some seem to fit better than others. With the correct special blade this tool is amazing, but much more costly to use. I hope that is helpful to you.
Question:	Will it fit ingersoll rand 114gqc air hammers
Answer:	4 bolts. Designed to fit standard "Quad Style" holes found on most 4" to 8" stone/granite saw blades. Call Bob at 800-980-7808
Question:	Does it work with central Pneumatic air hammer
Answer:	Only if an adapter is used such as Hilti clip-on to 1 1/4" unc.

Product features

Firecore 3-inch Wide 0.401 in Shank Air Hammer Chisel(3" x 7.5")

Firecore FS18375 3-inch Wide 0.401 in shank air hammer chisel crafted with high-quality steel for excellent blade sharpness retention. One-piece design, machine sharpened, specifically for high impact stresses, hard and durable with long life time. The extra wide 3" blade removes more thinset per pass. Perfect for removes old tiles, stubborn thinset, glue, mortar and plaster.

401 in shank, compatible with standard air hammer

Firecore universal air hammer bit, works with all standard 0.401 inch air hammers and air chisel hammers, including Ingersoll Rand Air Hammer, IR Air, Milwaukee Air Hammer, Chicago Pneumatic Hammer and Dewalt Air Tools, etc

• 0.401 in shank
• One-piece design
• Designed specifically for high impact stresses

Extra wide 3 inch edge, increase thinset removal efficiency

Crafted with high quality Chromium-Molybdenum steel, machine sharpened edge, designed specifically for high impact stresses, hard and durable with long life time. Widely used by professionals for home renovation and remodeling.

Ideal for following tough jobs in home renovation:

Stubborn thinset removal

Remove wall old tiles/ bathroom tiles/ kitchen Ceramic tiles/ tile from floors

Floor surface prep/ tiles glue

Mortar removal

Construction adhesive

Laminate wood flooring

Product description

Roughness and less dust are the biggest differences compared to diamond wheel grinding.

The carbide bushing bit is used for roughening and preparing concrete to make the surface have higher adhesion and improve the bonding strength between building materials.

Also used for the surface treatment of masonry，such as reducing concrete，removing stubborn dirt on stone，roughening floor or wall to plaching tiles.

The carbide bushing bit is two-piece designed，including a bushing head and a shank，it can be fit to the SDS-PLUS Rotary Hammer.

The shank has been quenched and tempered with toughness and durability, and can be reused.

The bushing head has welded some carbide teeth，these teeth are long and pointed，with fast and effective working performance.

The usable height of the teeth are close to 1/4"（6mm）and can be sharpened for reuse after blunted.

Excellent welding makes the weld surface are smooth and non-porous with high strength.

Operation instructions of this bushing bit:

·Hammer tool is cannot larger than 1100 watts or 10 joules for this size of the bushing bit.

·Hammer tool must be in hammer-only mode when using the bushing tool，DO NOT rotate, Do not rotate, Don't rotate.

·DO NOT always press the tool tightly, move to another position immediately after hitting one position.

·DO NOT hit diamond and carbide tools and steel，otherwise the carbide teeth will break soon.

·Always wear masks, glasses, earmuffs, safety helmets and other necessary protec

• SDS-PLUS Shank，12-Teeth，Overall Length 8"(200mm)，Head Φ1-3/16"(30mm)
• Fit to SDS-PLUS Rotary Hammer，For roughing surface and removing concrete
• The shank has been quenched and tempered with toughness and durability, and can be reused.
• The usable height of the carbide teeth are close to 1/4"(6mm) and can be sharpened for reuse after blunted.
• Long and pointed of the teeth with fast and effective working performance.

Product description

Chisel for Electric Hammer SDS Plus Shank 225mm~250mm Chisel 4 Types 7 Pieces Cold Chis Cutter U Type Chisel Scaling Cutting Crushing Fracture Maintenance

• 1.Packing Include:Chistagane *2 Flat chisel *2 (20mm x 2) Flat chisel *2 (40mm x 2) Tomo chisel *1
• 2.Made of high quality hardened steel alloy this with heat treatment process this set is very hard and durable . Ideal for chipping and breaking holes in concrete and masonry.
• 3.Application: Please use for chipping, crushing, grooving, and shaving work on all structures such as concrete, blocks, bricks, mortar, slate, ALC, bricks, walls, marble, and ceramic tiles.
• 4.Replacable:The SDS-Plus holder chisel has a different working surface and can be sharpened and forged again.
• 5.Quality Guarantee：Any product quality problems, please contact us at any time, 100% money back or refund guarantee, no questions asked!

• ALL-in-ONE: This multifunctional 6-piece chisel set includes a tile chisel, grooving chisel, scrapping chisel, flat chisel, point chisel, and scaling chisel so that you're ready to work on any material from ceramic tile to concrete, brick and masonry to real and artificial stone, even granite
• SDS PLUS SHANKS: These drill bits slot perfectly into your SDS Plus hammer drill regardless of manufacturer, whether Bosch, DeWalt, Makita, Milwaukee, Hilti, or other
• NON-SLIP: Our handles are crafted for tight non-slip use, with powerful torsion resistence to give you a longed service life even under punishing use
• HEAVY-DUTY: This SDS Plus drill bit set is made from high-quality chromium steel that has been drop forged and then heat tempered to give you strength and long-term corrosion resistance
• SATISFACTION GUARANTEED: Order with peace of mind, thanks to CO-Z's strong warranty and friendly 24/7 customer service

User questions & answers

Question:	What is the diameter of the shank
Answer:	One unit to do all three if you. are sharp enough to understand it ,otherwise save your money ,like I didn’t !!,
Question:	Will these work in a dch133b rotary hammer drill
Answer:	I tried to use it for Schmetz microtex 8/60 needle and after half an hour or more I have to changed the needle to 10/70 (I was using gutterman 100% polyester) and it was ok
Question:	Will these work for a Milwaukee better hammer drill
Answer:	Using this threader certainly doesn't require clearly seeing thing as fine as thread and the thin aluminum wire of the traditional threader. But I have two concerns: (1) I believe this threader is intended for threading sewing machine needles so it wouldn't be of much use for ordinary sewing needles; and (2) if one's eyesight is bad enough, one might have to depend a great deal on the sense of touch to position the thread correctly and the position the threader properly against the sewing machine needle, and that could be tricky for an older person whose manual dexterity and tactile senses are diminished. Something that has a more automated operation would probably be better, e.g., the Infila Auto Needle Threader sold on Amazon: http://www.amazon.com/MAGNIFYING-AIDS-Infila-Needle-Threader/dp/B001D1KLHC/ref=sr_1_20?ie=UTF8&qid=1407271931&sr=8-20&keywords=needle+threader
Question:	Where are these made
Answer:	This device does TWO things; a) holds sewing needle so it's easier to change the needle, and b) helps thread the needle after it's in the machine. Therefore, it is a "needle inserted & threader."

• 【POWERFUL MOTOR】 AOBEN electric Rotary Hammer Drill is equipped with 13 Amp (1500W) motor that delivers powerful impact energy to complete heavy duty projects on concrete, Masonry and metal.
• 【EASY TO OPERAT】 Three function modes can be easily switched - hammer only (chiselling-only), hammer drill (hammering and rotation), and drill only (rotation only) . There are double switch buttons to change the functions which can last longer compare with single switch button.
• 【ERGONOMIC DESIGN】 AOBEN roto hammer drill adopt ergonomic design with Rubber and 360 degree adjust handle provides a comfortable use feeling . SDS-plus hammer drill can guarantee the user’s safety and well designed heat dissipation motor and double anti-dust bottom structure can extend the hammer's use life.
• 【TOOL KITS】 AOBEN hammer drill set include 3 pcs drill bits(size of 8mm,10mm and 12mm), 1 pc flat chisel, 1 pc point chisel, a dirt proof boot, motor lubricant, 2 pcs of spare carbon brush and an extra chuck, fit drill bits size from 1mm to 13mm. Portable Carrying Case provides the perfect storage.
• 【MULTIFUNCTION】 AOBEN Professional rotary hammer Applies to wood,masonry,concrete and steel. Max 1-1/4 inch drilling diameter for concrete and for metal is 1/2 inch. AOBEN provide 24 months warranty service.

User questions & answers

Question:	Are your products superior to Eneacro
Answer:	22.5 lb plus whatever bit you have chucked into it. Those vary from 2-8 lb.
Question:	Can I use a small drill bit, like 3/16", on this hammer drill? I need to drill small holes on the concrete
Answer:	Germany as all other expensive bosch tools
Question:	I see in the manual, it calls for 40w oil as a lubricant manual says not provided). yet many refer to grease. which is it
Answer:	Thank you for your question. Bosch Tools like 11316EVS from Bosch NA has a power rating of 110/120V. If you will use it to another country with 220V, you will be needing a power converter. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	Can the 3 included drills be used on wood,masonry,concrete and steel or just concrete
Answer:	Thank you for your question. The 11316EVS comes with a carrying case. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499).

Product features

Drill Through Anything

Aoben electric rotary hammer drill is fueled by dominating 13-Ampere (1500watts) motor that packs-a-punch with each use. The precision bearings conclude for our drills amazing efficiency and the motor's durability. This much power and efficiency will easily let you drill through hard-wood, concrete, and metal

Stay Comfortable

Our powerful hammer drill was designed to bring comfort to your hands while performing those robust tasks. The vibration control design keeps you away from feeling a thing and the ergonomic design delivered with a fully-adjustable rubber 360-degree handle lets you hold on to the drill in just about any position

Operate with Ease

With our rotary hammer drill's easy to control and operate user experience, it was never easier to get out from between a rock and a hard place. The drill starts by simply pushing the trigger and the three function modes along with the double switch button allow you to easily switch between according to your needs

3-in-1 Perks

Aoben's electric rotary hammer drill comes with the ability of fast-switching between three different modes, each providing a different outcome:

Chisel Mode - A flat chisel used for cutting or shaping objects like wood, stone, or metal

Hammer drill mode - A powerful rotatory pulsing action using to make holes like a hammer on concrete and robust objects

Drill mode - A fast and powerful rotatory action to efficiently drill through solid objects

Life-Sustaining Built

What’s the point of having power and efficiency if it doesn't last forever? We at Aoben made sure that our powerful hammer drill wasn’t just made out of strong-quality materials, but also that it was designed to self-maintain and sustain its life year after year.

The cleverly designed heat exhaust system effectively avoids the motor from overheating and protects it from problems caused due to excessive temperature

A double layer bottom structure accounts for our hammer drill's anti-dust design which keeps the dust and other residues from settling inside the drill, resulting in an extended use life

Product description

Use the 6 in. SDS-Max Floor Scraper Assembly with any standard SDS-Max compatible rotary or demo hammer. The extra wide, replaceable 6 in. blade removes more thinset per pass. The hardened steel alloy is designed specifically for impact stresses. This Floor Scraper is the perfect choice for clearing thinset and other stubborn adhesives.

• 6 Inch Wide Blade
• SDS Max Shank
• Drop Forged Tempered steel
• Thinset Removal
• Tile Removal

User questions & answers

Question:	Does this bit work with a makita hr
Answer:	¿Estás buscando una hoja de 16 pulgadas de que? Esta cuchilla corta madera.
Question:	will this fit a dewalt D25263K
Answer:	No. You can use Concord Non-Ferrous Metals Blade. Like: NFM1000T80SP or NFM1000T100SP.
Question:	Is this supposed to have a flat edge? For me it's just jumping on top of the tile & thinset. Having a heck of a time. I figure it would have an angl
Answer:	No. It is made in China.
Question:	Should the bolts be torqued, or just tightened
Answer:	Thinner acrylic sheets are typically cut by scoring and snapping. Similar to drywall snapping, but you may need several passes with your scoring tool. Here's a highly-rated scoring tool for that purpose: https://www.amazon.com/OLFA-1090486-Plastic-Laminate-Scorer/dp/B003UHUZ5U If you want to try cutting with a circular saw, consider using this blade: https://www.amazon.com/gp/product/B00008WFT2 (DEWALT DW9153 6-1/2-Inch 90 Tooth Paneling and Vinyl Cutting Saw Blade with 5/8-Inch Arbor) More teeth per inch (TPI), anti-stick surface, made for cutting plastics. Same diameter blade and arbor.

Product description

SUNGATOR SDS Max Rotary Hammer Chisel Set





12inch Flat Chisel X1

12inch Point Chisels X1

12inch Scaling Chisel X1



Features:



1.Extra Large Size with High Hardness: Larger than common 10" masonry chisels, of better demolishing performance.



2.Premium Material: Top heated treated steel with high hardness provides outstanding performance on chipping and breaking bricks, concrete and other masonry.



3.Wide Application: Three chisels make you never worry about various daily chipping & demolishing work.



  ☆Point chisel for demolishing concrete slabs, brick, mortar, slate, masonry, and all different types of stones



  ☆Flat Chisel edges, chips, scales or channels concrete, stone, masonry and brick



  ☆Scaling Chisel removes scale, rust, concrete, masonry, brick, and stone or removes LARGE quantities of other tough material



4.Attention: *Only suitable for rotary hammer with SDS Max chucks.

• 【PREMIUM MATERIAL】Top heat treated steel with high hardness provides outstanding performance on chipping and breaking bricks, concrete and other masonry.
• 【EXTRA LONG & LARGE SIZE】12-inch long chisels with SDS Max plug give strong impact on concrete, flooring and brickwork.
• 【SHARPENED TOPS】Specially sharpened top gives continuously effective breaking on various masonry objects.
• 【MULTI-PURPOSE APPLICATION】Three chisels make you never worry about various daily chipping & demolishing work. Point chisel for demolishing concrete slabs, brick, mortar, slate, masonry, and all different types of stones; Flat Chisel edges, chips, scales or channels concrete, stone, masonry and brick; Scaling Chisel removes scale, rust, concrete, masonry, brick, and stones or removes LARGE quantities of other tough material.
• 【UNIVERSAL SDS MAX SHANK】Strengthened SDS Max shank suitable for different rotary hammer with SDS Max chucks.

User questions & answers

Question:	Will these work with Miiwaukee Hawk
Answer:	Hi Jack, Thanks for reaching out. Not sure how your account is set up, Amazon Prime or not. Usually orders of $25 or more shipped direct from Amazon are offered with free shipping. If you have any additional questions please feel free to reply to this message below. Best Regards.