10 best spray foam insulations

Product description

LOCTITE TITE FOAM Gaps & Cracks (1988753) is a new generation of polyurethane-based insulating foam sealant. It expands to fill, seal, and effectively insulate gaps and cracks up to 1 inches in size, inside and out! Loctite TITE FOAM Gaps & Cracks is a bright white color and offers Premium Durability with its high density, flexibility, strong adhesion and UV resistance. Use to seal out air, moisture and pests in basements or crawlspaces, attic hatches and plumbing, HVAC or electrical penetrations. Quick and convenient to use and apply TITE FOAM Gaps & Cracks offers an easy insulating spray foam option. It is recommended for use in both interior and exterior environments and is sandable and paintable.

• EXPANDS TO FILL: Loctite TITE FOAM Gaps & Cracks fills, seals, and insulates effectively around gaps and cracks up to 1 inches in size
• SUPERIOR FLEXIBILITY: Withstands building and material movement without compromising its seal
• STRONG ADHESION: Sealant bonds to most building materials like wood, concrete, brick, stone, metal, pvc, and more
• UV RESISTANCE: Withstands harsh UV rays for long lasting results
• STRAW APPLICATOR: For application simply use the attached straw applicator for a quick solution

User questions & answers

Question:	Can this be used indoors
Answer:	yes. a tree hit my house during 75 mph winds and the drywall and stucco came out, the weather was wrong on the internet and i have been fighting with allstate. i used this to fill in the wall on the inside, and it works great i am so grateful for it. i don't know what i would have done because i am a disabled senior citizen, it is very easy to use, jst be sure to read the directions.
Question:	Why is buying a case of 12..way more expensive than just buying 12 individual
Answer:	To find the inattentive consumers it seems..
Question:	Can you spray this can sideways? I need to spray under my kitchen cabinets to a gap between the wall and floor
Answer:	Yes you can, it’s compressed so the bottle can be turned any way you’d like.
Question:	is it waterproof? Is it sealed cell type foam
Answer:	It is water proof, and I do believe it is a closed seal cell.

Product features

Loctite TITE FOAM Insulating Foam Sealant

LOCTITE TITE FOAM Gaps & Cracks (1988753) is a new generation of polyurethane-based insulating foam sealant. It expands to fill, seal, and effectively insulate gaps and cracks up to 1 inches in size, inside and out! Loctite TITE FOAM Gaps & Cracks is a bright white color and offers Premium Durability with its high density, flexibility, strong adhesion and UV resistance. Use to seal out air, moisture and pests in basements or crawlspaces, attic hatches and plumbing, HVAC or electrical penetrations. Quick and convenient to use and apply TITE FOAM Gaps & Cracks offers an easy insulating spray foam option. It is recommended for use in both interior and exterior environments and is sandable and paintable.

Recommended For:

• Interior and exterior projects
• Most building materials including wood, metal, stone, brick and PVC
• filling gaps and cracks and sealing around wiring and plumbing penetrations, HVAC ductwork, basement and crawlspace drafts, sill plate & rim Joists, attic hatches, under baseboards, gas line penetrations and outside water faucets
• Sealing out drafts and moisture as well as keeping out pests and bugs

Not Recommended For:

• Polyethylene, polytetrafluoroethylene (PTFE)/Teflon or siliconized surfaces
• Areas that require fireproof or fire stopping materials
• UV exposed projects without protective covering

HIGH DENSITY FOAM:

Offers high density with a uniform cell structure for durability and overall insulation for your remodeling needs

SUPERIOR FLEXIBILITY:

Withstands building and material movement without compromising its seal

STRONG ADHESION:

Sealant bonds to most building materials like wood, concrete, brick, stone, metal, pvc, and more

UV RESISTANCE:

Withstands harsh UV rays for long lasting results

STEP 1:

Put on gloves

STEP 2:

Shake vigorously for 30 seconds

STEP 3

Screw straw into valve

STEP 4

Hold upside down - squeeze trigger to dispense

Product description

Made in the USA Product: Foam Core laminated between two layers of highly reflective radiant barrier foil. Contact Temperature Range: -60°F To 180°F (-51°C To 82°C) Water Vapor Transmission: .02 Perms**** Puncture Resistance: 60 Lbs. Per In.*** Pliability: No Cracking Linear Shrinkage: None Mold And Mildew: No Growth Flame Spread: 0 Astm E84-08 Smoke Development: 40 Astm E84-08 Fire Rating: Class A / Class 1 Reflectivity: 95% Motor Vehicle Safety Standard 302: Zero Surface Burn Rate Emittance: 0.04**** Benefits: 100% Made in USA Only Energy Star Rated Foam Core Reflective Insulation on the planet!!! Blocks radiant heat by up to 95% Reduces Heating and cooling loss Foam Core Sound Reduction Technology Saves you Energy and Money Easy to use and install Requires no protective clothing or special tools Requires no maintenance Highly Durable, Lasts Longer Meets new ASTM Fire codes

• One layer closed-cell foam bonded between two layers of highly reflective metalized aluminum polyester film. Industrialized strength, lightweight yet durable insulation designed to hold staples without tearing. Does not compress, collapse or disintegrate. Reflects 97% of radiant heat, emits less than 3% of heat, Class 1 / Class A fire rated radiant barrier that has passed the ASTM E84 test & ASTM E2599
• Non-toxic, non-carcinogenic, fiber-free, safe to handle and does not require protective clothing or respirators to install. Easy to install and maintenance free, cuts easily with utility knife or scissors and installs easier than fiberglass. Simply staple, nail, glue or use a spray adhesive to hold in place! No mess, and no itchy fibers!
• Not affected by moisture or humidity. Inhibits condensation and does not promote the growth of fungi, mold or mildew. Does not promote nesting of insects or rodents. Non-flammable, flame retardant
• Saves energy by reducing the stress on heating and cooling systems, keeping your home warmer in the winter, and cooler in the summer. It can reduce utility bills substantially all year round. As well as provides benefits of soundproofing when used in walls, ceilings and floors. Can also increase your overall property value depending on use.
• Dimensions: (16 Inches wide by 25 feet long ), 7MM (5/16 In) thick,

Product description

A PU Foam for top quality heat and sound insulation at buildings and houses. Provides a unique, monolithic thermal insulation application without junctures, seams and gaps. An innovative alternative to traditional building insulation methods such as polystyrene heat insulation boards, glass wool and rock wool. Single-component product used with an applicator gun. Enviromentally friendly product.

• Covers 240 board feet. Innovative alternative to traditional building insulations such as fiberglass batts and rols, blow-in, insulation boards, glass wool and rock wool.
• R value is 5.66 per inch and thermal insulation value 0.025 W/(m.K). Eeasly apply to uneven and hard to reach surfaces such as roof, facade, attick, ceilings, foundation etc..
• Thermcoat prevents the problem of thermal bridging (heat bypass) as it covers the studs with continuous insulation
• Can also be used on automobile body, trailers, boats, yachts, kayaks, vessels
• Closed cell formula provides airtight seal for most building materials such as wood, brick, concrete, mdf, osb, drywall etc..

Product description

Seal Spray Closed Cell Insulating Foam Cans and Kits Two component foam performance in one easy-to-use can. Each can covers approximately 25 Board Feet. Spray-foam insulation is a quick and easy way to seal the gaps in your home and save on energy costs. While many foams require mixing two components out of large canisters, Seal Spray Foam can be applied directly by simply attaching a spray nozzle to the can. Seal Spray Foam costs much less than the competitor large format kits for the same amount of coverage in board feet. With Seal Spray Foam's compact size, you'll waste less material on smaller projects and won't have to dispose of any large tanks. Traditional two-component cylinders are large and bulky. With our product's small form factor, you can easily take it anywhere. Seal Spray Foam makes it to where multiple users can spray at the same time versus only one with larger format two-component tanks. FEATURES: Superior adhesion to many surfaces, Ability to apply with ease on walls and ceilings / roofs overhead Fast skin over time, Environmentally friendly much lower carbon foot print Easy to use in tight places, Get the exact yield you need do not over or under purchase ever again, Extremely high yield per weight unit (OZ), Superior Insulation and Sealing of wall boards, HVAC ducts, electrical conduits, pipes and other penetration, Ideal for insulating walls attics and roofs, Filling of gaps and cavities, Thermal and sound insulation with superior R value, Soundproofing, Always empties 100% / Empty container easy to dispose of vs 2 component cylinders with unused and un-reacted product which can be harmful to humans and environment. Note: Kits with spray gun come with a single reusable Premium 15" Spray Gun. Cleanup is made easy with the 1 can of included Seal Clean a Polyurethane Foam Cleaner and it is recommended to use Personal Protective Equipment while spraying (respirator, gloves, and eye protection - NOT INCLUDED).

• Two component foam performance in one easy-to-use can. Each can is 27.4oz and covers approximately 25 Board Feet (1 Board Feet = 12" X 12" x 1" Thick)
• A quick and easy way to seal the gaps in your home and save on energy costs. Applied directly by simply attaching the included spray nozzles to the can..
• Costs much less than the competitor large format two-component kits for the same amount of coverage in board feet.
• Compact small form factor size wastes less material on smaller projects, no large tank disposal, and you can easily take it anywhere.
• Multiple users can spray at the same time versus only one with larger format two-component tanks.

User questions & answers

Question:	Would this work for stone basement walls
Answer:	I think it's fine for filling voids in a stud wall but don't think it would stick well to a stone wall. Also, there's a lot less foam volume than you would think from so many cans.
Question:	can this be used in existing walls
Answer:	Yes. As long as the cavities are open. If you are Looking to fill the wall cavity, remember you only have a can worth. If you need more sq footage, buy a larger two part kit.
Question:	I need this for a tight crawl space area under a floor. Can you link to a compatible gun that doesn't require the can to be on top
Answer:	No. The gun has a special tip with a fan type tip that gets attached. You also can’t extend the gun length. Is will do rim joists as long as there’s no pipes or anything in the way that will impede the nozzle and can.
Question:	Can I fill block walls with this foam
Answer:	You would need a ton of product to fill a cinderblock wall. Also because it is closed cell it expands. For that application open cell products are usually used.

Product description

DuPont Enerfoam Professional Foam Sealant is a one component, flexible polyurethane minimal expanding, flexible polyurethane closed cell spray foam used for adhering insulated concrete forms, architectural foam and drywall, and sealing cracks and voids such as pipe penetrations. The foam expands only enough to generate an effective seal, retaining elasticity as the structure expands and compresses. Enerfoam is designed to form a durable, airtight, water resistant bond to common building substrates such as wood, brick, concrete, foam board and most plastics. Its foam skin repels and deflects water, which can help reduce the potential for moisture damage to wood substrates. In the U.S., Enerfoam is also recognized as a fireblock, which means it resists the free passage of flames to other areas of the building through concealed spaces. Enerfoam Professional Foam Sealant is tested to the following standard: ASTM E84 – Standard Test Method for Surface Burning Characteristics of Building Materials. ASTM E814 – Standard Test Method for Fire Tests of Through-Penetration Fire Stops. Enerfoam complies with the following code: Underwriters Laboratories, Inc. (UL) Classification, Classified as a sealant; see UL R13655 – ICC-ES ESR-1961 (US). CCMC 13074-R (CAN).

• 🏡 GREAT STUFF PRO FIREBLOCK! Dow Enerfoam Professional Foam Sealant is a one component, flexible polyurethane minimal expanding, flexible polyurethane closed cell spray foam used for adhering insulated concrete forms, architectural foam and drywall, and sealing cracks and voids such as pipe penetrations. The foam expands only enough to generate an effective seal, retaining elasticity as the structure expands and compresses.
• 🏡 INSULATING FOAM SEALANT! Dow Enerfoam is designed to form a durable, airtight, water resistant bond to common building substrates such as wood, brick, concrete, foam board and most plastics. Its foam skin repels and deflects water, which can help reduce the potential for moisture damage to wood substrates. In the U.S., Enerfoam is also recognized as a fireblock, which means it resists the free passage of flames to other areas of the building through concealed spaces.
• 🏡 EASY TO USE! Pop the top off of the can, screw on the can onto the gun, open the gun's valve and you are good to go! If the can is not finished after the job is done, leave it on the can and close the valve until the next use. When it comes to the cleaner, however, remove the can from the gun after usage.
• 🏡 TESTED AND APPROVED! Enerfoam Professional Foam Sealant is tested to the following standard: ASTM E84 – Standard Test Method for Surface Burning Characteristics of Building Materials. ASTM E814 – Standard Test Method for Fire Tests of Through-Penetration Fire Stops.
• 🏡 AWESOME VALUE! Includes: 12 Cans of Enerfoam 30oz.

User questions & answers

Question:	Does it produce any toxic odors for humans or dogs when used inside a house
Answer:	It is not a toxic odor, however, it can be an irritant. It states on the technical documents you need to use Enerfoam in a well ventilated area.
Question:	How many feet per can
Answer:	According to Dow testing you can yield 970 linear feet per can at 3/8" bead.
Question:	Do this product spray a wide pattern
Answer:	When the foam is sprayed, it comes out in a cone pattern.
Question:	Is this product UV resistant and waterproof? Can it be used outdoors
Answer:	Enerfoam can be used outdoors. However, cured foam will discolor if exposed to ultraviolet (UV) light. If left exposed, the foam will eventually crumble. Enerfoam is water resistant.

Product description

Professional Use. FROTH-PAK Foam Insulation is a two-component, quick-cure polyurethane foam that fills cavities, cracks and expansion joints for insulation and air sealing. Flame Spread and Smoke Development FSI = 25, SDI = 400. Froth-Pak Insulation (Aged 180 days @ 75°F) has an R-Value of 12.2 when sprayed at 2” thick. FROTH-PAK™ Foam Insulation allows it to be used in a wide range of industrial, commercial, institutional and residential applications in the United States. FROTH-PAK™ Foam Insulation can be left exposed in non-fire-resistant-rated roof/wall junctures per National Fire Protection Association testing. Check Local building codes. Review all instructions and (Material) Safety Data Sheet before use. Always wear appropriate PPE. Signature required for delivery; Special handling needed for returns.

• Due to state regulations, this product is unavailable for use in CA, CO, WA, NY, VT, MA, NJ
• FROTH-PAK 210 Foam insulation kit yields approximately 210 board ft (17.5-cubic ft)
• Each self-contained kit contains an ISO(A) cylinder, a Polyol (B) cylinder, INSTA-FLO Dispensing Spray Gun, 6 cone spray nozzles, 4 fan spray nozzles, and a 9-ft gun hose assembly (GHA)
• Blocks air infiltration, helps to meet air change per hour (ACH) code requirements, ICC listed, one hour re-entry; tack free in 30 to 40 seconds
• The Class-A rating (flame spread of 25 or less) of FROTH-PAK Foam Insulation allows its use in a wide range of interior and exterior applications. Check with local codes prior to use

User questions & answers

Question:	Can this be applied in any temperature, as long as the cans are at least
Answer:	To achieve the optimal chemical temperature before spraying foam, store chemical indoors at a temperature between 75-85°F. If the product is kept between the temperature requests than it can be sprayed on a colder surface. Thank you.
Question:	Is this product sutted to treat a crawl space? My crawl space is 10' X 16', the floor is always cold to the feet as the floor above it is oak hardwood
Answer:	This product can be used in a crawl space. This package will cover 210 square feet at 1 inch thick of foam.
Question:	Can I use this product, stop, clean-up, and then use it again, hours or days later
Answer:	Once you start using this product, it must be used in 30 days. If you stop at anytime, always keep the dirty nozzle on, shut the gun and then shut the tank valves. When you want to use it again, pop off the used nozzle, put a clean one on, open the gun and tanks.
Question:	does this include an applicator suitable for spraying a flat surface for relatively even coverage - to achieve good R-value
Answer:	comes with a total of 10 tips... 6 fan tips and 4 cone tips for various applications. If you go to the manufacturer website, you will find any information needed there.

Product description

DAP 7565002200 Touch N' Seal 200 Low GWP 1.75 PCF FR ICC Closed Cell Spray Foam Kit: Low GWP Touch N' Seal 1.75 PCF ICC foam is a closed cell spray foam insulation that provides Class A fire retardancy, thermal insulating and sound attenuating properties. 1.75 PCF ICC meets the requirements associated with ICC criteria for US building codes. It is suitable for use in commercial, residential, transportation and many other applications. FEATURES: High r-value 6.6 @ 1" (25mm), Airseals and saves energy, Closed cell structure, Class A fire rated, Does not shrink or settle. Compatible with all fiber insulation systems including cellulose, fiberglass and stone wool. Significantly increases structural strength, Reduces sound transmission, Weight(LBS) : 41.5600, Shelf Life : 1 Year (when unopened), Yield (Board Feet) : 200 BF, Foam Type : Low GWP Closed Cell, Fire Resistant : Yes, Dry/Tack Free Time : 30 - 60 Seconds, Cure Time (Tack) : Approx. 1 Hour, Density : 1.75 +/- .25pcf (28.0 +/- 4.0kg/m3), R Value : 6.6

• Airseals and saves energy, Closed cell structure, Class A fire rated, Does not shrink or settle, High R-value 6.6 @ 1" (25mm)
• Theoretical Yield (Board Feet) : 600 BF (1 BF = 12"x12"x1" thick)
• Compatible with all fiber insulation systems including cellulose, fiberglass and stone wool
• Significantly increases structural strength, Reduces sound transmission
• Low Global Warming Potential (GWP), Dry/Tack Free Time : 30 - 60 Seconds, Cure Time (Tack) : Approx. 1 Hour. SHIPS IN 2 BOXES (A & B)

Product description

Dow Great Stuff Pro Gaps and Cracks

In the United States, GREAT STUFF PRO™ Gaps & Cracks was the first foam to be recognized as a fireblock, which means it resists the free passage of flames to other areas of the building through concealed spaces. The foam is a bright orange color, easily identifiable by U.S. code officials.

Considering the combined open space created by gaps, cracks and penetrations in the average home can total as much as a 4' x 4' window left wide open, it’s no wonder that air infiltration is one of the biggest threats to a home’s energy efficiency. And as uncontrolled air movement drives up energy bills, it may also increase the potential for mold, mildew and other moisture-related problems.

Great on Benefits For a professional seal, rely on GREAT STUFF PRO™ Gaps & Cracks.

• Ideal for gaps and penetrations up to 3" (75 mm)
• Expands to form airtight and waterresistant seal
• Bonds to wood, metal, masonry, glass and most plastics
• Repels and deflects water
• Quick cure time (tack-free in less than 20 minutes, trim within 30 minutes)*
• Cost-effective: 24 oz (680 g) can equivalent up to 22 quart tubes of caulk; 30 oz (850 g) can up to 33 quart tubes of caulk†
• Easy cleanup with GREAT STUFF PRO™ Gun Cleaner
• Orange colored foam

*Actual cure time will depend on temperature, relative humidity and size of foam bead.

†Based on estimated yield under ideal conditions using gun foam, 3/8" bead.

• 🏡 THE GAP AND CRACK ATTACKER! According to the US DoE, the average US home has a 1/2 mile of gaps and cracks. Air leaks account for 25-40% of the energy used for heating and cooling a typical home, resulting in higher utility bills. Fill the gaps and crack down on energy loss with GREAT STUFF PRO GAPS AND CRACKS INSULATING FOAM SEALANT!
• 🏡 CLOSE THE GAP! Great Stuff Pro Gaps and Cracks is a gun-applied, expanding spray foam sealant for use all around the home. It is recognized as a fireblock sealant and is orange colored for easy recognition. The sealant is ideal for gaps and penetration up to 3" (75mm), expanding to form an airtight, water-resistant seal adhering to wood, metal, masonry, glass, and most plastics.
• 🏡 EASY TO USE! Pop the top off of the can, screw on the can onto the gun, open the gun's valve and you are good to go! If the can is not finished after the job is done, leave it on the can and close the valve until the next use. When it comes to the cleaner, however, remove the can from the gun after usage.
• 🏡 AWESOME VALUE KIT! Includes: 12 Cans of Great Stuff Pro Gaps and Cracks 30oz, 1 AWF 1000 Standard Pro Foam Gun, 2 Cans of Great Stuff Pro Cleaner 12oz.
• 🏡 GUARANTEED QUALITY! Not satisfied with the product? No worries, as we will offer you a full refund. Click the "Add to Cart" button now and fill those gaps and cracks!

User questions & answers

Question:	Will this work in a cf-ds1/ gun
Answer:	This foam will work with a CF-DS1 PRO Foam Gun. Thank you.

Product description

DAP 7565021120 Touch 'n Seal 120 Low GWP 3.0 PCF FR Closed Cell Spray Foam Kit. Low GWP Touch N' Seal Low Density (1.0 PCF) Spray Foam is an open-cell, non-structural air sealing and insulating foam for use in both new construction and renovation of industrial, commercial, agricultural and residential properties. FEATURES: 3.0 PCF, high compressive strength and dimensional stability, High 6.89 r-value, Closed cell structure Permanent installation; does not shrink or settle. May be sanded flush with existing spf roof surfaces. Significantly increases structural strength; important in high wind situations (per the spray polyurethane foam alliance. Expands to fill smallest to largest gaps, cracks, and holes. Also suitable for use in appliance and cold storage maintenance and repair. Shelf Life : 1 Year (when unopened), Foam Type : Low GWP Closed Cell, Fire Resistant : Yes, Dry/Tack Free Time : 120 Seconds, Cure Time (Tack) : Approx. 1 - 2 Hours, Density : 2.75 +/- 0.25 pcf (44 +/- 4 kg/m3 ), R Value : 6.89

• 3.0 PCF, high compressive strength and dimensional stability, Closed cell structure, Theoretical Yield (Board Feet): 120 BF (1 BF = 12"x12"x1" thick)
• High 6.89 r-value, Permanent installation; does not shrink or settle, May be sanded flush with existing spf roof surfaces
• Significantly increases structural strength; important in high wind situations (per the spray polyurethane foam alliance
• Expands to fill smallest to largest gaps, cracks, and holes
• Also suitable for use in appliance and cold storage maintenance and repair. Low GWP (Global Warming Potential)

Product description

Dow FROTH-PAK Foam Insulating Sealant is a two component, quick cure polyurethane foam that fills cavities, cracks and expansion joints for insulating and air sealing. FROTH-PAK Sealant is typically used as a foam sealant to fill cavities, wall and floor penetrations, cracks, and expansion joints. Chemical curing allows 2 part polyurethane foam to be dispensed, expand, and become tack free in seconds. Will skin over in 30-40 seconds and be completely cured in under 1 minute. Dow FROTH-PAK 12 is great for smaller jobs and yields 12 board feet of foam (One board foot = 12"x12"x1").

• SPECIAL NOTE! Due to state regulations, this product is not currently available for use in CA, CO, WA, NY, VT, MA, NJ. Signature required at the time of delivery.
• 🏡 GAP FILLER! Large openings that let air into a home rob homeowners of money, energy efficiency and comfort. FROTH-PAK Foam Sealant is designed to fill gaps and penetrations greater than 2 in. quickly and affordably, helping eliminate unwanted airflow throughout a home.
• 🏡 GREAT COVERAGE! FROTH-PAK 12 Sealant is great for smaller jobs and yields 12 square feet of foam at one inch thick.
• 🏡 QUICK CURING! Chemical curing allows 2 part polyurethane foam to be dispensed, expand, and become tack free in seconds. Will skin over in 30-40 seconds and be completely cured in under 1 minute.
• 🏡 GREAT VALUE KIT! Each Kit includes: 2 - 12oz cans of chemical (1 ISO, 1 Polyol), 1 INSTA - FLO Dispenser and Hose assembly, 1 Can Carrier, Strap assembly, 3 Anti-Crossover Nozzles (Caulking Pattern), Operating Instruction Sheet, 12 Pack of Gloves

User questions & answers

Question:	Can this be used under a rv to cut road noise
Answer:	Rigid products generally do not cut noise as well as a dense undercoating or Dynamat product would. It will stop air-leak type whistles and whooshes.
Question:	What is the R-value per inch
Answer:	Complete crap. Don't buy it.
Question:	Is this fire retardant
Answer:	I dont believe so. There are some that are.
Question:	My house has no insulation between 2x4's, how many wall cavities will one of these kits fill? I have like 10-15 secions need filling
Answer:	This kit covers only 12 sg ft at 1 inch thick of foam and is made for very small jobs. We would suggest you look at the Froth Pak 210 which is a fire rated foam and covers 210 sq ft at 1 inch thick.