12 best wood deck stains

Product description

Olympic Maximum stain + sealant in one, semi-transparent, is a great stain & sealer that can be used on exterior horizontal and vertical surfaces. It provides enhanced waterproofing and sunblock UV defense to strengthen, protect, and condition wood fibers, ensuring the wood's natural beauty lasts. Olympic maximum with weather-ready application is also specifically formulated to allow you to stain when you want, not when the weather dictates all while getting the same excellent results. Weather-ready application provides four great benefits: 1) you can clean and stain your wood on the same day - even after rain. 2) the stain is rain-ready after just 8 hours. 3) the stain can be applied when air and surface temperatures are as low as 35 Degrees Fahrenheit. 4) If the surface is too hot to touch, lightly mist the surface before application of the stain. Olympic - America's most trusted brand since 1938. Olympic - exterior wood stain for decks & more.

• Enhanced waterproofing protection to help make sure your wood is protected from cracking due to water

User questions & answers

Question:	Title says 3 gl, options offers 5 gl. i click on 5 gl to the order but the order form shows 3 gl. so am i getting the 3 or 5 gl
Answer:	ask amazon that one
Question:	Can this product be used in a paint sprayer
Answer:	Yes. Do not thin or dilute this product.
Question:	Where can I get the clear in 5 gallon buckets? I love my new fence and don't want to apply any stain color
Answer:	Amazon
Question:	I am looking for "olympic natural look protector plus sealant ", for my red wood deck. is this the same one
Answer:	Hi there, the closest current product to the natural look protector plus is the Olympic Maximum Transparent/Toner product not the semi-transparent.

Product features

Stain + Sealant in One

Stain + Sealant in One protects and beautifies in one step.

Weather-Ready Application

Allows greater opportunities for staining when it may rain or when the weather may be too hot or cold.

Enhanced waterproofing protection

Helps make sure your wood is protected from cracking due to water.

Advanced SunBlock UV

Helps protects your wood from dangerous UV rays that can wear down the coating.

How much stain do you need to buy?

One gallon of wood stain covers approximately 250-350 square feed, which is enough for a small to medium deck. It should also cover both sides of a 25 foot long fence or a couple pieces of furniture.

Two Gallons

Two gallons of wood stain cover approximately 600 square feed, which should be more than enough for the standard deck project or a 50 foot long fence.

Three or more Gallons

Three or more gallons of wood stain will most likely only be needed on large projects, as they should cover over 850 square feed.

Note: Solid Color Stain requires two coats. You should effectively double your gallons purchased when using a solid.

How To Stain Your Wood Deck In 3 Easy Steps

Sweep debris from deck and then use a product such as Olympic Premium Deck Cleaner to penetrate the wood and lift dirt to the surface to be cleaned, as well as clean stains caused by mildew, dirt, algae and mold. Allow surface to dry.

STEP 2

Tape off any surfaces you don’t want stained. Also, avoid staining in direct sunlight or on hot surfaces because the stain will dry too fast to penetrate properly.

STEP 3

For clear, toner and semi-transparent stains, apply a thin coat with a high-quality brush, roller, paint pad, or spray. For solid stains, apply two thin coats with a brush, roller, or paint pad. To avoid lap marks, apply to a few boards at a time, keeping a wet edge.

For best results, backbrush into the surface to work finish into the wood and ensure the coating is even. Make sure to treat all areas of the wood, including joints, edges and ends.

You’re going to want to follow the directions on your stain container to determine if anything needs done after your final application.

Olympic Wood Stains: A reputation as durable as our products

Olympic Wood Stains has provided exceptional protection and durability for all wood types, applications and budgets since 1938.

Nothing protects and beautifies your wood like Olympic Exterior Stain. Trust the natural beauty of your wood to Olympic Stains.

Olympic Paints and Stains guarantees satisfaction with the application and performance properties of this product when applied to a properly prepared surface in accordance with label directions. This guarantee is limited to your choice of product replacement or refund of the purchase price. See product label for more details.

• Opaque Finish Completely Hides Wood Grain & Provides Maximum Protection Against Fading & Graying Caused by Damaging UV Rays
• Acts as Both a Stain and Sealer for Your Wood - Use Over Top of Existing, Solid Color Wood Stains (that still have good adhesion)
• Available in 6 Beautiful, Solid Color Finishes That Dry to a Flat, Natural Looking Finish
• Low Odor Stain, Water-Based Cleanup - Low VOCs (<60 g/L)
• For Use on all Horizontal and Vertical Wood Surfaces Including Pressure Treated Lumber, Pine, Cedar, Fir, Redwood, Mahogany, & More

User questions & answers

Question:	How much does 1 gallon cover
Answer:	About 1/4 of an 8x12 shed. I used 4 gallons for the whole shed
Question:	Will this work with a paint gun
Answer:	Yes, this product works well with an airless sprayer
Question:	Is there any texture to this solid stain? Does it last without peeling for a couple years
Answer:	There is no texture, just a smooth paint that took the texture of what we painted it on. No idea on the peel, only just used in the last couple weeks.
Question:	How much do I need for a 24’ x 18’ deck
Answer:	This is a water based product and as such gets a better coverage area. The product should yield approximately 600 SF. However, when staining a deck, you'll not meet that coverage area if you use an airless paint sprayer. Typically the average would be 450 - 475 SF. If you roll it, you should expect to get between 500 - 525 SF.

Product features

About SaverSystems

At SaverSystems, we understand the frustration people feel when they see what they've built deteriorate from the elements. Property is one investment you can bank on, but if it's made with concrete, masonry, or wood it needs to be protected. SaverSystems employs state of the art technology to help protect and save what you build.

SaverSystems has manufactured premium quality, water repellents and protective coatings for over 30 years. We make coatings for a variety of surfaces including wood, concrete, masonry. In addition to the #1 Deck brand, SaverSystems also manufactures DEFY, ChimneyRx, MasonrySaver, & ChimneySaver branded products.

All of our products are manufactured in our production facilities located in Richmond, Indiana. Every product is produced under strict quality standards and formulated with the highest quality raw materials available. Our innovative solutions and coatings have stood the test of time, and are trusted by industry professionals and homeowners alike.

Product description

Thompson's Water Seal waterproofing stain - transparent provides complete outdoor wood protection. It waterproofs long after the initial water beading is gone.

• Prevents Water Damage
• Advanced Polymers Provide Fade Resistant Color
• Coating Resists Mildew and UV Damage
• Applies to Freshly Cleaned Damp or Dry Wood
• Exceeds Industry Standard ASTM D-4446 for Waterproofing Wood

User questions & answers

Question:	Can this product be applied with a pump sprayer
Answer:	I used a pump sprayer with no problems.
Question:	What size is this product
Answer:	Mine came in a Gallon can
Question:	Can this be applied by roller please and thanks
Answer:	Yes, I applied mine with a roller.
Question:	when should i repeate? 1 year 2year
Answer:	The first application was to a rather long ignored deck, say 5 or so years. I am about to redo it this spring, less than two years later. No idea of how long it will hold on what had been a very thirsty deck, but I hope two to three years.

Product features

The Thompson's Company has earned a well-deserved reputation as identifying industry trends and emerging technologies.

In the early 1920’s, polymer chemist Edward Addis Thompson developed a formula that protected buildings from exterior water damage. His discovery became known as Thompson's WaterSeal Clear Multi-Surface Waterproofer and initially was used by architectural and construction firms for concrete applications.

Product description

Thompson's WaterSeal Waterproofing Stain provides complete outdoor wood protection. It waterproofs long after the initial water beading is gone. Use on decks and fences, outdoor furniture and exterior wood. Shows medium wood grain and medium color. 1-coat protects 4 years on decks or 6 years on fences and siding. Applies to freshly cleaned damp or dry wood. Prevents water damage. Advanced polymers provide fade resistant color. Coating resists mildew and UV damage.

• Prevents Water Damage
• Advanced Polymers Provide Fade Resistant Color
• Coating Resists Mildew and UV Damage
• Applies to Freshly Cleaned Damp or Dry Wood
• Exceeds Industry Standard ASTM D-4446 for Waterproofing Wood

User questions & answers

Question:	The listing says semi-transparent, but the picture says transparent, which version is this
Answer:	Semi
Question:	Is this a gallon container of the product
Answer:	Yes this is a one gallon of Thompson water seal
Question:	what clear seal do you recommend to use on 12year old pressure treated planks
Answer:	I've used Thompson's water-based semi-transparent stain/sealer 3 times now for my 15 year-old pressure-treated deck and it has always done a great job of covering and protecting the wood. It doesn't really last the 4 years they claim, but still very good. They also make an oil-based clear sealer and I use that on my cedar pergola, also very good stuff but it's hard to work with because it doesn't cleanup with water. As an alternative to the oil-base they have an all-purpose water-based clear sealer for wood and masonry. I would use that on my pergola if it was made of pressure treated wood, but with cedar I really want a penetrating oil. So for your pressure treated deck, I would recommend the water-based clear sealer. Given how well the semi-transparent stain has worked for me, I would expect good results with the clear as well. You will certainly want to clean the wood first if you expect to brighten the gray appearance of aged wood. I spray oxygen bleach on the wood first and then scrub with a stiff brush and rinse before sealing.
Question:	Would this product work well on untreated Adirondack furniture
Answer:	Yes, I think it would be suitable. I have only used it on my deck however. Good protection in a wet climate. Rub it down well after it dries to keep the color from getting on clothes though if you're using a color stain.

Product features

The Thompson's Company has earned a well-deserved reputation as identifying industry trends and emerging technologies.

In the early 1920’s, polymer chemist Edward Addis Thompson developed a formula that protected buildings from exterior water damage. His discovery became known as Thompson's WaterSeal Clear Multi-Surface Waterproofer and initially was used by architectural and construction firms for concrete applications.

Product description

#1 Deck Premium Semi-Transparent Wood Stain is an advanced, water-based, semi-transparent stain formulation designed to penetrate deep into wood pores for maximum protection and longevity. #1 Deck protects wood from harmful UV rays and damage caused by water penetration. #1 Deck is safe to use, has a low odor, and is easy to clean up with soap and water. It is ideal for all soft wood types including pressure treated pine, cedar, fir, or redwood. #1 Deck Premium Wood Stain is intended for all soft wood types of weathered, exterior wood surfaces including decks, fences, siding, outdoor furniture, gazebos and playsets.

• PROTECTS AGAINST COLOR FADE AND PREVENTS GRAYING - #1 Deck Protects Wood From Damage Caused By Exposure to the Elements. Can Be Used On Pressure Treated Pine, Cedar, Fir, Redwood, or Most Other Softwoods. Hardwoods Will Require More Frequent Maintenance Coats.
• BOTH A DECK STAIN & DECK SEALANT IN ONE - #1 Deck Stain Is a Dual-Purpose Stain & Sealer. It Adds Color to Your Wood and Seals it, Preventing Damage Caused by Water Penetration.
• ALLOWS THE WOOD GRAIN TO SHOW THROUGH - Available in 5 Beautiful, Semi-Transparent Deck Stain Colors That Dry to Flat, Natural Looking Finishes That Will Enhance the Beauty of Your Exterior Wood.
• BETTER FOR THE PLANET, EASY SOAP & WATER CLEANUP - With Less Than 50 g/L VOC Content, #1 Deck Sealer Is a Better Choice For Our Planet. Clean Up is Super Easy - Just Use Soap and Water.
• WORKS ON DAMP WOOD, MINIMIZING THE WAIT TIME BETWEEN CLEANING AND STAINING - Once Your Wood Deck Is Visibly Dry, It's Ready to Stain.

User questions & answers

Question:	In the reviews, everyone mentions the light oak color but I don’t see it available. Is it discontinued or renamed
Answer:	I bought 2 gallons of light oak about a month ago. Look again or call the company.
Question:	Can I reapply this over the old coat when I need to
Answer:	I'd clean the boards the best you can and let them dry, and then yes, you can reapply it. It says so on the can.
Question:	How many sq ft will 2.5 gallons cover
Answer:	depends. cover says 100 - 150 sq ft per gallon. I used 7.5 gallons on about 600sq ft of deck and barely had enough, that was 2 coats. 1st coat sucked up a lot, 2nd coat went a lot farther
Question:	How many years on before having to reapply
Answer:	I live at 9000 ft. in the mountains- .wind, rain, snow, UV. I try to touch up every 2-3 years.

Product features

About SaverSystems

At SaverSystems, we understand the frustration people feel when they see what they've built deteriorate from the elements. Property is one investment you can bank on, but if it's made with concrete, masonry, or wood it needs to be protected. SaverSystems employs state of the art technology to help protect and save what you build.

SaverSystems has manufactured premium quality, water repellents and protective coatings for over 30 years. We make coatings for a variety of surfaces including wood, concrete, masonry. In addition to the #1 Deck brand, SaverSystems also manufactures DEFY, ChimneyRx, MasonrySaver, & ChimneySaver branded products.

All of our products are manufactured in our production facilities located in Richmond, Indiana. Every product is produced under strict quality standards and formulated with the highest quality raw materials available. Our innovative solutions and coatings have stood the test of time, and are trusted by industry professionals and homeowners alike.

• WATER-BASED SEMI-TRANSPARENT WOOD STAIN – This environmentally friendly, water based deck stain allows the wood grain to show through with a beautiful semi-transparent, natural matte finish. It's great for staining wood decks, fences, siding, playsets, outdoor patio furniture, and more.
• FORTIFIED WITH ZINC NANO-PARTICLE TECHNOLOGY– It’s like sunscreen for your wood. Tiny zinc particles dispersed throughout the stain reflect damaging UV rays, preventing premature graying and color loss.
• EXTREMELY DURABLE, QUALITY THAT LASTS – DEFY Extreme wood stains are made with the highest quality resins available that have better resistance to fading and darkening. The result is a quality semi-transparent deck stain that typically lasts a season or two longer than competitive products. Keep your deck, fence or siding looking great for longer by using DEFY premium wood stains.
• EASY TO MAINTAIN – When it’s time to do a maintenance coat, there’s no need to sand or strip the surface again. Simply brighten the wood with DEFY Wood Brightener and apply a single maintenance coat of DEFY Extreme Wood Stain.
• 250 VOC COMPLIANT - Ships to all states except California. California residents can purchase DEFY Extreme 40, which is VOC Compliant in California.

User questions & answers

Question:	will this work in paint gun
Answer:	yes it will, that's how I applied it.
Question:	Will be applying to white cedar fence. How dry does the wood have to be
Answer:	I did not heed the "one year" to dry on the new portion of my deck. Did old and new at the same time when the new portion was perhaps 2 months old. There was a definite difference. I washed and brightened both. Also did two coats. The 2nd coat was done while the first coat was still wet as per instructions. Also brushed vs. rolled. The stain seeped into the older wood much better and the color is richer. Don't believe the stain will last for years. In covered areas yes, it does. But my deck area that gets full S.Carolina sun, does not last the year. I re-stained last year and will be doing a layer of water proofing on horizontal surfaces this year in hopes that I won't have to stain again for a while. I am still happy that I bought the water based just because of the clean up and the ease of re-staining even if I feel I had to do it much quicker than if I had used oil based.
Question:	Can I use this on my new cream colored bamboo blinds? Unsure about the method they were colored, but almost no sheen. Want stain protection in kitchen
Answer:	Hard to say without looking at the wood , but if the wood still looks porous enough we're the Stain can soak in some I would think a light coat possibly 2 would do it. It's very thin milky color but dries clear
Question:	I am applying this to a fence. Would you recommend it for fences? Also, if you have used this product how well is it holding up
Answer:	Using it for 10 years, great on fences. Apply W weed oil sprayer. Brush W 4" throw away brush as needed. Time between coats varies W the look you want. 2-3 years looks great. At 5 years fading is noticeable. Apply when cool. Dampen surfaces to get soak in.
Question:	Can I use this on kitchen cabinets made with walnut veneer? My goal is to keep the natural raw, light look but also see the grain, not milky
Answer:	No, don’t use on kitchen cabinets. Instead use water base polyurethane. Easy clean up and is just as good as oil base polyurethane.
Question:	Can this be used to seal laminate flooring
Answer:	It is not for interior use. Also you cannot stain , paint or varnish over Seal-Once products. Seal-Once must be applied to raw wood.
Question:	Can this be used over an oil base stain
Answer:	No.
Question:	What’s the best product for Douglas fir pergola
Answer:	No, this Seal Once product is not made for pergola floors, it has a dull finish. Not shiny. I would think you would want a poly eyrthane, which is durable and has a shine, recommend a semi-gloss. I would suggest you go to Sherwin Williams and consult their opinion.

Product features

About SaverSystems

At SaverSystems, we understand the frustration people feel when they see what they've built deteriorate from the elements. Property is one investment you can bank on, but if it's made with concrete, masonry, or wood it needs to be protected. SaverSystems employs state of the art technology to help protect and save what you build.

SaverSystems has manufactured premium quality, water repellents and protective coatings for over 30 years. We make coatings for a variety of surfaces including wood, concrete, masonry. In addition to the DEFY brand, SaverSystems also manufactures ChimneyRx, MasonrySaver, & ChimneySaver branded products.

All of our products are manufactured in our production facilities located in Richmond, Indiana. Every product is produced under strict quality standards and formulated with the highest quality raw materials available. Our innovative solutions and coatings have stood the test of time, and are trusted by industry professionals and homeowners alike.

• Water-based sealer with advanced penetrating nanotechnology & added strength of Polyurethane. This premium wood sealer performs like an Oil-based product, without any noxious solvents or toxic chemicals.
• Great investment to enhance and extend the natural life of wood. Protects against water damage for up to 10 years on vertical surfaces & 6 years on horizontal.
• Ultra Low-VOC wood sealer safe for people, pets, plants or marine life. Easy to apply with soap & water clean-up. Save time with wet on damp application.
• Prevents warping, cupping, wood rot, mold, mildew, staining, decay & will not peel like many topical sealers that only form a top-coat.
• When used as a wood stain creates a UV barrier to prevent fading. Rich color palette available in 11 different color tints. Clear formula allows wood to turn gray naturally

User questions & answers

Question:	What color is this sealer? On the can it says clear but in the description it says white
Answer:	It goes on white dries to perfect wet look clear
Question:	Can this be used on raised beds? Both inside and outside of the bed
Answer:	You may use this product, however, the inside of the box will not be protected as it would be against soil.
Question:	Can I use this on the inside of a terrarium? I'm making one out of wood, and I need the inside to be water proof, as it will be very humid
Answer:	We would not recommend our products for this application. It will be too much constant contact with moistures in an enclosed area.
Question:	Why shouldn't the product be used in doors? What would you recommend on doors
Answer:	Seal-Once products are completely penetrating and are non film forming. The door will still look like raw wood after it is applied. You cannot apply stain, paint ,polyurethane, or varnish over Seal-Once products. Also, Seal-Once products must be applied to raw wood.

Product features

The Science of SEAL-ONCE and Innovative Use of Nanotechnology in Wood Finishes & Stains

Unlike many top-coat sealers sold today that trap moisture below the surface, NANO+POLY creates a flexible, breathable barrier which allows water vapor to escape. This key feature helps prevent damage to wood caused by water intrusion, such as: wood rot, decay, mold & mildew growth, cracking & splitting. Typical wood sealers form a barrier on the surface of the wood, trapping moisture below the surface. As the water evaporates, it causes the surface coating and the substrate to crack & peel, leaving a broken surface that requires continued maintenance and is susceptible to additional damage. SEAL-ONCE uses cutting-edge, nano-particle technology to allow wood to breath and help prevent water vapor damage by protecting wood from the inside out.

Water-based Product that Will Not Harm People, Pets, Plants, Livestock or Marine Life.

SEAL-ONCE products are ultra-low VOC, low odor, non-toxic, non-flammable and non-ozone depleting. They are safer for the environment and do not contain nitrates, phosphorous compounds or heavy metals like many Oil-based sealers & stains on the market today.

Quick & Easy Application

Apply first coat with a synthetic brush; pump-up garden sprayer; air-assisted; and/or airless sprayer. Use 15-17 tip and medium to coarse spray pattern. When spraying, always back brush for best results. Second coat can be applied once first coat has penetrated but is still damp. Second coat must be applied within one hour of applying first coat. For best results, apply in the shade and out of direct sunlight.

Available in 11 Tinted Wood Stain Colors

NANO+POLY can be tinted for use as wood stain in any of the 11 color tints available: Clear, Light Brown, Natural, Brown, Mahogany, Redwood, Bronze Cedar, Cedar, Black, Battleship Gray, Shale Gray & Cape Cod Gray. The tints are sold separately and when mixed with Clear, the tinted formula provides additional UV protection from harmful sun rays.

Surface Preparation & Coverage

Approximate coverage: 250-350 sq. ft./gallon per coat. Actual coverage will vary due to the porosity of the surface. All surfaces should be cleaned with SEAL-ONCE All Wood Cleaner before sealing for best penetration and performance. Remove all old coatings, dust, debris and loose material. Remove oil, grease, algae, grime, mill glaze and mold and mildew stains with appropriate cleaners.

Product description

Ready Seal stain enhances the natural beauty of the wood allowing the texture and grain of the wood to remain visible. This stain is an oil-based, semi transparent stain and sealer in one, suitable for all your exterior wood projects. It is a unique formula that penetrates deeply to protect and preserve wood from the elements such as mold, mildew and damaging UV rays.

From the Manufacturer

Ready Seal stain enhances the natural beauty of the wood allowing the texture and grain of the wood to remain visible. This stain is an oil-based, semi transparent stain and sealer in one, suitable for all your exterior wood projects. It is a unique formula that penetrates deeply to protect and preserve wood from the elements such as mold, mildew and damaging UV rays.

• Requires no primer. Ready Seal is darkest when first applied. It reaches its true color in approximately 14 days. Do not apply Ready Seal over painted or newly stained surfaces. Sealed surfaces inhibit penetration.
• May be applied using sprayer, roller or brush onto the woods surface.
• Requires no back brushing and will nerver leave runs, laps, or streaks.
• Requires no wet-line application, the product will blend itself and can be applied in any temperature range for proper application.
• Requires no diluting or thinning prior to spray applications.
• Subject to or will include a PaintCare recycling fee in the following states: CT, or VT. Not available in CA.
• Easy maintenance - no sanding or stripping required for re-application

User questions & answers

Question:	What is the warranty on this
Answer:	I don't believe there is any warranty. We applied it two years ago and the covered areas still look good. The section in direct Sun...needs to have it applied again.
Question:	How long can the product be stored once the container is opened
Answer:	We actually used some that we had stored in our garage that was left over from the last time we stained our siding and that was in the summer of 2012, 6 yrs ago. When we removed the lid, it looked like it had become a gel but my husband used a drill with a paint mixer/stirrer tool and it became liquefied again. We applied it to the siding without incident and the color matched the new 5 gallon containers we bought this summer .
Question:	I have 275 ft of fence plus a gate- what's the coverage with using a sprayer
Answer:	I’m in the process of staining my fence (I am using a different brand) with a semi-transparent stain. I have 187’ of fence at 5’ high including 2 gates. Applied with a roller and brush, I’m going to need around 13 gallons. My recommendation is rent a sprayer from Home Depot. You’ll save time and money as you’ll use less product and it will go much much faster.
Question:	we have a heavy dining set and i am worried about scratches after i stain, how does it hold up to heavy chairs moving back and forth
Answer:	I have a deck/patio furniture set, including a cast iron umbrella base. Lots of use over the last year with no evidence of scratches in the deck. The stain penetrates the wood rather than building a barrier so dragging stuff across the boards won't take it off provided the wood is properly prepared.

Product features

Application

1. Use a brush, roller or sprayer to apply Ready Seal.

2. Blend multiple containers together to ensure color consistency.

3. Apply two light coats to wood surface and allow at least 45 minutes between.

4. Allow 48 to 72 hours of drying. Drying time will vary depending on temperature, humidity and surface porosity.

-Ready Seal contains no linseed oil and will not stain hands.

-Ready Seal is biodegradable when in contact with soil and water.

-Meets current VOC level requirements throughout the United States.

Product description

Varathane Premium Fast Dry Wood Stain is a high-performance stain enhanced with nano pigment particles. Nano pigments provide ultimate color quality and exceptional wood grain highlighting allowing for maximum color in one coat. Varathane Fast Dry Wood Stain seals wood pores and hardens in just one hour. Easily brushes on without the use of a pre-stain or wood conditioner.

• Ideal for use on all interior wood projects: furniture, cabinets, doors, trim and paneling
• One-coat coverage, fast-drying oil based formula
• Dries to the touch in just 1 hour and covers up to 275 square feet
• High performance stain system enhanced with nano pigment particles
• Highlights natural wood grain to reveal wood's beauty

User questions & answers

Question:	Can this stain be thinned out? If so, with what
Answer:	How long has it been drying for? Perhaps put the table outside in the sun to fully dry. I applied clear coat after mine dried.
Question:	Looking to paint hollow doors- Do I need a wood conditioner first? Or will this cover well in 1 coat
Answer:	Drop-down menu. If they’re not present when you look, they may not be available in this listing. In that case, do another search for Miniwax Stain to find a listing that has additional color options.
Question:	Is this considered a gel stain or regular stain
Answer:	Depends on how well the item has been sanded. I used it on unfinished wooden crates and usually did 2 coats to give it an even look
Question:	Should this be applied with a brush or cloth
Answer:	Never got that far with the pint of Stain that I received . The stain had no Brown in it for a Fruitwood color. But I would have applied a good sealer, like Varnish or Polyurethane.

Product features

Varathane Premium Fast Dry Wood Stain

Varathane Fast Dry Wood Stains are 3 times faster than ordinary stains.

Sand with Increasing Fine Grits

• Sand bare wood in the direction of the grain
• Start with #120 grit sandpaper and progress through #150, #180 and #220 grits
• Wipe clean with mineral spirits

Stain with Brush or Lint-Free Cloth

• Apply liberally with brush or clean, lint-free rag
• Wait 5-10 minutes according to color preference
• Wipe off with clean, lint-free cloth in the direction of wood grain

Cover with Poly for Extra Protection

• For long term protection and durability, top coat with Varathane Polyurethane
• Can be coated within 1 hour of stain application

Helpful Tips for a Perfect Project

Product description

Provides complete outdoor wood protection. This solid exterior wood stain adds the most color to the surface and shows the least wood grain. Available in several beautiful deck stain colors.

• Prevents Water Damage
• Advanced Polymers Provide Fade Resistant Color
• Coating Resists Mildew and UV Damage
• Applies to Freshly Cleaned Damp or Dry Wood
• Exceeds Industry Standard ASTM D-4446 for Waterproofing Wood

User questions & answers

Question:	Can this be applied to damp wood? How would it be on raised garden beds
Answer:	I wouldn't recommend it. Even applying to untreated bare wood it started peeling and flaking after less than one year. Damp wood would certainly lead to bubbling before long.
Question:	Is this solid, or semi-transparent? Title says solid. But description and product image show semi-transparent
Answer:	Solid, worked nice but had to put two coats to really cover good.
Question:	So is this 1gallon or 16 gallons? I’ve seen a similar question but I wanna be sure
Answer:	One (1) gal. 1-gallon.
Question:	In the description, it says 16 gallon. What size is it
Answer:	I got 16 gallons! It took 3 UPS guys to deliver it to me. Cheaper than drinking water!

Product features

The Thompson's Company has earned a well-deserved reputation as identifying industry trends and emerging technologies.

In the early 1920’s, polymer chemist Edward Addis Thompson developed a formula that protected buildings from exterior water damage. His discovery became known as Thompson's WaterSeal Clear Multi-Surface Waterproofer and initially was used by architectural and construction firms for concrete applications.

Product description

A good exterior wood stain offers long-lasting protection, waterproofing and a mildew-resistant finish that maintains the integrity and beauty of wood in variable outdoor conditions Our 100% Acrylic formula protects wood from rain, snow and sun damage. This stain is warrantied up to 3 years on decks and up to 5 years on fences and siding (see label for details). Use on properly prepared new to moderately weathered and unsealed exterior wood surfaces (0-10 years exposure) including decks, shingles, wood patio furniture, railings, siding, shakes and fences. This semi-transparent stain provides a mildew-resistant finish and UV protection. Coverage of up to 250 square feet For the first coat and up to 500 square feet For the second coat. This is a 1-Gallon can of KILZ exterior waterproofing, semi-transparent wood stain in Redwood. For failing coatings or to remove loose wood fibers, use a product such as KILZ Wood Stain & Finish Stripper followed by a product such as KILZ Wood Cleaner & Brightener to neutralize the wood. For best results allow the area to dry at least 24 hours before coating. Lightly sand to remove remaining wood fibers/fuzz. Apply with a pad applicator, nylon/polyester brush, or high quality pump sprayer. KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

• A good exterior wood stain offers long-lasting protection, waterproofing and a mildew-resistant finish that maintains the integrity and beauty of wood in variable outdoor conditions
• Our 100% Acrylic formula protects wood from rain, snow and sun damage. This stain is warrantied up to 3 years on decks and up to 5 years on fences and siding (see label for details).
• Use on properly prepared new to moderately weathered and unsealed exterior wood surfaces (0-10 years exposure) including decks, shingles, wood patio furniture, railings, siding, shakes and fences.
• This semi-transparent stain provides a mildew-resistant finish and UV protection. Coverage of up to 250 square feet For the first coat and up to 500 square feet For the second coat.
• This is a 1-Gallon can of KILZ exterior waterproofing, semi-transparent wood stain in Redwood.
• For failing coatings or to remove loose wood fibers, use a product such as KILZ Wood Stain & Finish Stripper followed by a product such as KILZ Wood Cleaner & Brightener to neutralize the wood.
• For best results allow the area to dry at least 24 hours before coating. Lightly sand to remove remaining wood fibers/fuzz. Apply with a pad applicator, nylon/polyester brush, or high quality pump sprayer.
• KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

User questions & answers

Question:	What type of solvent would I need to clean an automated sprayer out after using this product (warm water/thinner/solvent/etc
Answer:	It has a 1080 camera on it. No reason to attach a go pro.
Question:	Do they sell 5gal buckets
Answer:	The video quality is good
Question:	Could this be used to stain plywood subflooring indoors
Answer:	7-8 minutes after full charged per battery.
Question:	Can I use this over pre dyed wood (alcohol stain
Answer:	Just bought this drone. Absolutely NOT 8 min fly time. After calibration, gps sync, and using the camera to take pics, let alone video.. best fly time was 3.5 minutes.. was same on both batteries. Maybe if you take off and just let it hover with no maneuvers it may be longer. Going to buy another set and see if these were just old batteries. Good luck

Product features

Durable, Beautiful & Long Lasting

KILZ Stain provides durable, waterproof protection and a mildew-resistant finish that maintains the integrity and beauty of wood in variable outdoor conditions.

One gallon covers up to 250 sq. ft. for the first coat and up to 500 sq. ft. for the second coat.

Ideal for Decks, Siding, Fencing & More

Use on properly prepared new to moderately weathered and unsealed exterior wood surfaces (0-10 years exposure) including decks, shingles, wood patio furniture, railings, siding and fences.

Brush or spray on. Can also be applied with a high-quality paint pad.

Protects from Rain, Snow & Sun Damage

Our Acrylic formula protects wood from weather and UV damage. This stain is warrantied up to 3 years on decks and up to 5 years on fences and siding.

Product description

Cabot Australian Timber Oil for Decks, Siding, Railings and Outdoor Furniture is a unique blend of oils originally formulated to protect dense tallowwood, cambara and merbau from the extreme Australian exposures. Australian Timber Oil penetrates deep into the dense, resin-rich woods to accentuate natural wood depth and patina. Containing a precise blend of superb-grade linseed oil for maximum penetration, long-oil alkyds for durability and pure South American tung oil for color depth and water repellency, Australian Timber Oil delivers three-way oil protection and a beautiful hardwood stain. In addition, complex translucent iron oxide pigments are added to ensure a lasting U. V. -absorbing surface rich with color and dimension. The result after years of development is an advanced-technology treatment of unrivaled performance designed to protect your exotic wood surfaces like never before.

• 3-way oil protection for superior penetration
• Ideal for decks, siding, railings, and outdoor furniture
• Available in 5 wood toned colors
• Not Intended for interior surfaces
• Oil-based

User questions & answers

Question:	i want to buy this but need to know if this is the Honey teak 1 gallon Australian Timber Oil? Thanks
Answer:	It's very red and very dark.
Question:	can you confirm color is 'Mahogany Flame' and size is '1 quart' ? thanks
Answer:	Good question! To tell you the truth I've never tried getting wet with it on.
Question:	I just finished applying it to a new deck and it appears really dirty where people walk. What do I do
Answer:	I really like it it stays on all day, but I haven’t tryed it water. I recommend it.*****
Question:	There are two versions of this product, one is water clean up, the other is oil based and paint thinner is used for brush clean-up. Which version
Answer:	It does NOT come with a brush. I use the blond but found that I can apply it lighter or darker, depending on how much I use.

Product features

Cabot Heritage

Cabot is recognized as an industry leader in the development, manufacture and distribution of premium quality Wood Care products.

Count on us for:

Easy-to-use wood preparation products

Long-lasting deck stains

Beautiful wood finishes and preservatives for outdoors

Rich wood stains and durable topcoats for indoors