11 best deck treatments

Product features

STORM PROTECTOR EXTERIOR STAINS KEEPING THE EXTERIOR BEAUTIFUL

Storm Protector stains are designed to stand up to whatever comes down. Whether it's months of baking sunlight and damaging ultraviolet rays, seemingly endless rain or brutal winters marked by ongoing cycles of freezing and thawing. Our Storm Protector Stains are there to ride out the storm.

Storm System

Storm Protector is a Semi-Transparent penetrating stain and sealer meant to protect and highlight the natural beauty of the wood grain.

Penetrates Deep into the Wood Grain

Storm Protector penetrates deep into the wood for added protection against Mother Nature.

Compatible with Most Wood

Storm Protector is compatible with any wood species including: Redwood, Cedar, Pine Douglas Fir, Spruce, Cypress, Mahogany, and Pressure Treated.

EASY APPLICATION

LONG LASTING BEAUTY

PERFECT SOLUTION FOR DECKS AND RAILINGS

Product description

DIRECTIONS FOR USE: For best results soak the wood blank for a period of up to 24 hours prior to turning or carving. Immediate submersion of green woods is recommended however not mandatory. Soft and closed cell woods require additional soak time whereas hardwoods will absorb the solution immediately. Each and every Native or Exotic wood requires specific procedures to be determined by the artist. Treatment is considered complete when the exodus of air bubbles from the submersed blank is no longer observed. Extended treatment time will not compromise the result. Heating of the solution to a temperature of up to 130 degrees Fahrenheit will accelerate treatment and assist in the Bulking and curing of the Silicone and Cedar Oil compounds. Allow a determined drip and cure time prior to the initiation of the cutting or carving procedure. A72 hour elapsed wait time is satisfactory but will vary on different wood species. Final sanding and finishing turns will become enhanced as an internal adhesion of the wood fiber has been promoted by the treatment. Start to finish projects are recognized. Staged drying periods during production are not necessary.

• 【 FORMS A MOISTURE-RESISTANT BARRIER】: Turner’s choice keeps alcohol, grease, food oil, acid, and water from ruining the surface of wood. It helps slow and stop graying that naturally occurs in wood.
• 【 LONG LASTING TREATMENTS 】: Turner’s Choice is the perfect product to secure and protect your wooden projects for a lifetime. One treatment of Turner’s Choice will last you and your family up to 8 years between applications.
• 【 LOW ODOR, ECO-FRIENDLY 】: Proven cedar wood oil penetrating formula. The penetrating protectant goes into the pores of the wood fast with a quick dry time. Use on Decks, Docks, Fences & more.
• 【 DRIES FASTER THAN COMMON WOOD SEALERS】: Turners Choice has a remarkable turn-around time drying and ready for top paints and stains in as little as 72 hours.
• 【 USE ON TREATED & UNTREATED WOOD】: Use turners choice on treated and untreated wood surfaces. Works on pine, oak, cedar, cherry wood, cedar, and other wood surfaces. Safe on indoor and outdoor applications.

User questions & answers

Question:	Does Turners choice require a catalyst to be mixed in the gallon as an activator, then do you have to cure it in a oven for a little time
Answer:	I used this for some birch “cookies”. Soaked in covered container..then let air dry.
Question:	Is it suitable to apply this product to wood using a vacuum chamber
Answer:	I can't even speculate. I just paint it on. It doesn't work on all woods, but right now I'm getting miraculous results on second-growth redwood that was cut a year ago. I paint it on, cover with plastic, and repeat every day or two for a week or two.
Question:	Can i apply a stain after treating wood with turner's choice wood stabilizer
Answer:	Yes you can apply stain after treating. For best results let the piece dry thoroughly.
Question:	We are planning on using wood slices for a craft; Will we still be able to paint on the slices once this is applied? How long does it take to "cure
Answer:	I have not used it as a base for finish but, I think I'd try giving it 48 hrs to dry. You might be able to go directly over it with oil base paint or may be acrylics. You might need coat of SealCoat, sanding sealer , dewaxed shelac by Zinser. I would probably recommend that but, you can experiment and see what works for you. If you are using end grain slices they may develop pie shape splits. They sell Turner's Choice under a new name now though you can still find T C on the web.

• LIFETIME WOOD CORE PROTECTION. Eco Friendly Plant Based Oils & Catalyzed Copper Penetrate Deep Within The Wood To Form A Permanent Bond With Wood Fibers
• XTREME PROTECTION From UV, Water And Naturally Caused Damage. No More Constant Replacing Of Rotted Deck Boards
• SEALS, WATERPROOFS & PRESERVES Exotic Wood, Bamboo, IPE Pressure Treated Wood And Everything In Between
• GREEN WOOD PROTECTION From Cupping, Curling, Cracking And End Grain Checking And Splitting
• NEW TO AMAZON! Get The Results The Pros Get. Contains No Mineral Oils, Cedar Oil Or Petroleum Oils. Covers Up To 400 Square Feet

User questions & answers

Question:	Could I use on indoor hardwood floors
Answer:	I didn’t count, but the listing says 237, and is a full size 5 pound container
Question:	Do you have any references or pro's using this in the Atlanta area
Answer:	The packages are by weight (5lb). The 4-1/2 inch screws have 237 screws. The 5-inch screws have 210 screws.
Question:	Can this be used on a children’s outdoor playset
Answer:	Good day. Thanks for your valued inquiry: Stainless steel is a little softer than hardened steel screws, so we strongly recommend pre-drilling and countersinking for best results. Hope this helps. Thanks. Elton
Question:	Does wood need to be cleaned with renu cleaner concentrate prior to application as it does with seal it green bamboo, and if so, who sells it
Answer:	On the 3 inch screw it is 3/4 inch. Don't have the 2 1/2.

Product description

Enter in the address onto this website to see if you qualify for shipping: http://www3.aqmd.gov/webappl/gisaqi2/VEMap3D.aspx Easy one coat application allows for quick and simple use. Only Penofin Penetrating Oil Finish can meet the needs of hardwood in fiber protection, penetration, stabilizing, and nourishing. Used for all fine hardwoods such as: Ipe, Pau Lope, Ironwood, Mahogany & Teak Formulated to allow the wood to breath. Transparent option highlights the natural beauty of the wood. APPLICATION: After properly cleaning your frame, simply apply a moderate coat of the stain to the wood. Allow stain to sit 20-30 minutes, giving it time to properly penetrate the wood. Wipe the surface thoroughly clean to remove excess finish. It is recommended that this product be applied every 3 to 6 months. For more product information and detailed instructions. Combustible - keep this product away from heat, open flame, and sparks. Beware of spontaneous combustion. Make certain all rags or other materials used with Penofin are soaked in water, stored in an air-tight container, or otherwise disposed of safely.

• RESTRICTED: Can NOT be shipped to CA, Areas include but not limited to LA, San Bernando, etc.
• The deep penetration of Brazilian Rosewood Oil protects the wood inside and out
• 99% ultraviolet protection keeps your wood looking new longer.
• High-grade mildewcide protects wood from mold and mildew.
• Dries without a surface film that will crack, bubble, or peel.

User questions & answers

Question:	What is the difference between ipe finish and tigerwood finish, as my deck has been called both
Answer:	the AEB10 has good sustain and great tone even through a small amp. It's a great bass for the money. Much better than the AEB5E tone wise. They play about the same.
Question:	The deck is Tigerwood, but rails are not. Can I use this on rails that are a softer wood
Answer:	The best way to answer is with a picture but I don't see that option. The button is on the bottom of the neck where the neck attaches to the body. The other end is exactly where you would expect nearly every guitar.
Question:	Need a good oil based sealer for cedar siding,a darker brown
Answer:	Yes, this should plug into any standard amp.

Product description

Eco wood 5 Gallon Eco Wood Treatment. Ages the wood to a silvery patina color and creates a high end aged look. 100% Non-toxic wood treatment and preservative. Only one application is needed because it never comes off. It has even been proven to prevent the white rot fungi. No maintenance (one application only).

• Ages the wood to a silvery patina color and creates a high end aged look
• 100% Non-toxic wood treatment and preservative
• Only one application is needed because it never comes off
• It has even been proven to prevent the white rot fungi
• No maintenance (one application only)

User questions & answers

Question:	Can someone explain the color options and it turning Gray what is the point of getting a color if it's going to be grey
Answer:	I don’t believe the color relevant, it’s not like paint. One way or another you will get an aged wood look, and, in my opinion, the color will depend on what wood you are using.
Question:	can I use this on a deck that has already been sealed with an oil sealer like Timber Oil
Answer:	No, bare untreated wood.
Question:	Does this product need a sealer after it dries
Answer:	I built wooden planter boxes 6' X 8' from untreated Douglas Fir and used nothing but Eco on them. 3 years later, they are looking brand new!
Question:	Can you dilute eco wood treatment for a lighter stain? i just want a very light grey
Answer:	We have used this product on entire structure and mixed according to directions. However, I recommend testing on a scrap piece of board then you are sure to get the color you want. It does get a little darker after a couple of days depending on your wood. I have no doubt you can dilute and get the perfect shade you want. We wanted ours darker so we sprayed on 2 coats and it turned out perfect. Love it! . This is a great product and when we are completely finished I will be happy to share photos.

Product description

One Gallon treats up to 600 square feet. Super Grip is an anti-slip application that will eliminate slippery tile floors when they become wet. When this clear liquid is applied, it creates a microscopic texture on the surface of the tile through an etching process. You can't see it or feel it when it is dry, but when wet; it becomes absolutely slip resistant. This safe and easy application will not harm the grout or surrounding areas. Super Grip is not a coating so it won't chip, peel or wear away. It actually micro etches the surface of the tile to create an invisible tread on the surface of the tile. Super Grip is a permanent treatment and guaranteed to last for years . Super Grip anti-slip applications will make your tile floors ADA compliant. Independent test performed showed an increase of nearly 600% in slip resistance when the tile was treated with our product. It works indoors or out on ceramic, porcelain, travertine, granite, marble, quarry and concrete. Will not work on vinyl, acrylic , fiberglass or epoxy surfaces .This is the same product used by professionals to make tile floors slip resistant. Use for: RESIDENTIAL: Kitchen, Hallway, Bathroom, Entry Way, Living Room etc. COMMERCIAL: Hallways, Restroom, Entry Ways, Reception Area etc. Pool Deck, Locker Room, Spa Commercial Kitchen Floor types: Porcelain, Ceramic, Marble, Travertine ,Granite, Quarry, Unsealed Concrete . Long Lasting - Won't Yellow - Satisfaction Guarantee

• For Residential: Kitchen, Hallway, Bathroom, Entry Way, Living Room, Patio
• For Commercial : Hallways, Restrooms, Entry Ways, Reception Area, Pool Deck, Locker Room, Spa, Resta
• Safe, fast and easy to apply with out changing the beauty and integrity of your tile
• One gallon will cover up to 600 sqft. and increases the slip resistance almost 600%
• One application can last for 5+ years - Guaranteed

User questions & answers

Question:	does it work on wood floors
Answer:	It works well on tile but since it etches the tile it wouldn't work well on wood.
Question:	Is this product non-toxic? Will I be able to check it in a suitcase for air travel
Answer:	Not sure if it is non-toxic or not, but it etches tile like an acid. I would be surprised if they would allow this on an airplane.
Question:	Followed the directions but the slate has a milky haze. We have tried rinsing again to no avail. Any suggestions
Answer:	It will go away over time but you can use some nano scrub to help remove it faster. Send us pictures if you continue to notice anything after a few days.
Question:	Would this help my dogs from slipping and sliding on tile floors
Answer:	When my tile got wet it was very slippery. Fell a few times. I live in florida so during the summer it rains everyday. I put this product down acording to the instructions. No more slipping!! Amazing.. As for your dogs ... i dont know. To me it would definately help. But with it being tile... and dogs... they're gonna slip some no matter what u put down
Question:	how is it applied
Answer:	Apply Xypex with a semi-stiff nylon bristle brush, push broom (for large horizontal surfaces), or specialized spray equipment. Do not apply Xypex with a trowel, roller, paintbrush or paint sprayer. The full Xypex application guideline is a three page document that I can’t link to/attach here, but if you perform a search for Xypex Coating Installation and Procedure you’ll pull it right up.
Question:	Will it work on concrete that has some paint or coloring on it? I wouldn't think so, but thought I would ask
Answer:	You will want to remove as much paint as possible. For the remaining paint, as long as that stays adhered to the wall, the product should stick ok to it. 80-90% removal is really what you are looking for. Hope this helps!
Question:	Can I use this product to seal my damp basement concrete block wall
Answer:	YES! THAT IS EXACTLY WHAT IT IS FOR! The REASON Xypex is so expensive is because it not only fills in cracks and creates a protective border but it actually EXPANDS inside cracks or where ever there is a need! Of the twenty plus people that have used this to waterproof their basement we have not only not had EVEN ONE complaint, but have been thanked numerous times! I used it on my Mom's basement-she had fought it for 45 years trying everything and once we used the Xypex on it 4 years ago NOT A DROP OF WATER LEAKS IN ANY LONGER! Dave
Question:	Can i use this product if I have cracks repaired with epoxy
Answer:	The short answer is no. The long answer is it depends on what you are trying to accomplish.(yes and no) If an epoxy injection has failed to stop water then you will need to chip and grind the epoxy away and make sure you have a clean and saturated substrate prior to Xypex treatment. If your goal is to stop water make sure you use both Xypex Concentrate and Xypex patch n plug. If you are wanting the Xypex to adhere to the epoxy and grow crystals through the concrete somehow after it gets through the epoxy to decrease permeability in the concrete then the answer is no. Xypex works with concrete not epoxy. Xypex is cementitious and similar to concrete, epoxy is foreign and with waterproofing is more of a blocker instead of healing concrete. Xypex is hydrophilic and has a catylytic affinity to water, epoxy is hydrophobic and wants to block water. Sometimes we use both to accomplish the same goal but I suppose if you wanted to coat your walls with Xypex Concentrate adjacent to the cracks that are filled with epoxy you are good to go. The Xypex will grow up until the point where the epoxy injection is, obviously depending on the porosity and permeability of your concrete but in that case yes it would be like a belt and suspenders approach.

• PROFESSIONAL LEVEL PROTECTION: Extreme Protection For Your Bamboo Deck, Dock Or Fence Without Toxic Chemicals. Extreme Bamboo Is A Plant Based & Non-Toxic Wood Sealer That Keeps Wood Looking New And Protected For 15+ Years
• EXTENDS THE LIFE OF YOUR DECK: Protects Bamboo And Exotic Wood Types From Water And UV Damage. SIG Extreme Bamboo Will Extend The Life Of Your Fence, Deck Or Shingles
• NO MORE DAMAGE: Protects ALL Wood Types From End Grain Checking, UV Damage, Cupping, Cracking And Other Naturally Caused Damage
• DEEP PENETRATING: Protection To The Core Is More Than A Tag Line. Extreme Bamboo Continues To Penetrate Into The Core Of The Board For Over A Month After Application. CONTAINS No Mineral Oils, Mineral Spirits, Pine Or Linseed Oils. Covers 400-600 Square Feet Per Gallon
• WORKS ON ALL WOOD TYPES: Developed For Bamboo Works Equally Well ON ALL WOOD TYPES: Ideal For Use On All Exotic And Traditional Wood Types Such As Bamboo, Ipe, Brazilian, Oak, Yellow Pine And Others. Ideal For Use To Protect Green Wood From Checking And Cracking. Use On All Wooden Decks, Docks, Fencing, Patio Furniture, Shingles, Logs, Tree Carvings And More

User questions & answers

Question:	Will this protect a new bamboo shower bench and foot stool, if so, how should it be applied
Answer:	No, they are stainless. Will not rust even in saltwater
Question:	How can I apply protectant to newly purchased bamboo roller shades for exterior lanai
Answer:	I used them on my wood fence they worked great. I would use them for your project.
Question:	What tempature do i need to apply the product? i like in wa st and rains often here, what is min and max tempatures to apply
Answer:	Any where that sells auto feed screw guns
Question:	Does it work on bamboo poles to protect against the weather (sun and rain
Answer:	All corrugated brand screws will work, it can do decking screws just have good steady down pressure

Product description

Exterior wood stain and wood protector that allows some natural wood grain and texture to show, while adding subtle color to the surface. Available in several deck stain colors.

• Prevents Water Damage
• Advanced Polymers Provide Fade Resistant Color
• Coating Resists Mildew and UV Damage
• Applies to Freshly Cleaned Damp or Dry Wood
• Exceeds Industry Standard ASTM D-4446 for Waterproofing Wood

User questions & answers

Question:	Can this product be applied with a pump sprayer
Answer:	The body is plastic and the hose fittings are brass do I would say it is.
Question:	What size is this product
Answer:	I just eyeballed it and I'm not saying it's "full flow", they do seem a bit restricted. But they aren't small holes. I would venture to say they are close to full size.
Question:	Can this be applied by roller please and thanks
Answer:	Both ends were capped on mine, but I have not had a reason to attempt removing them.
Question:	when should i repeate? 1 year 2year
Answer:	It is certified lead free. Information on BPA and phthalate content is unknown. My source: I called Orbit and spoke to a representative. Hard to find one that meets your desired criteria...

Product features

The Thompson's Company has earned a well-deserved reputation as identifying industry trends and emerging technologies.

In the early 1920’s, polymer chemist Edward Addis Thompson developed a formula that protected buildings from exterior water damage. His discovery became known as Thompson's WaterSeal Clear Multi-Surface Waterproofer and initially was used by architectural and construction firms for concrete applications.