13 best cedar fence stains

Product description

Ready Seal stain enhances the natural beauty of the wood allowing the texture and grain of the wood to remain visible. This stain is an oil-based, semi transparent stain and sealer in one, suitable for all your exterior wood projects. It is a unique formula that penetrates deeply to protect and preserve wood from the elements such as mold, mildew and damaging UV rays.

From the Manufacturer

Ready Seal stain enhances the natural beauty of the wood allowing the texture and grain of the wood to remain visible. This stain is an oil-based, semi transparent stain and sealer in one, suitable for all your exterior wood projects. It is a unique formula that penetrates deeply to protect and preserve wood from the elements such as mold, mildew and damaging UV rays.

• Requires no primer. Ready Seal is darkest when first applied. It reaches its true color in approximately 14 days. Do not apply Ready Seal over painted or newly stained surfaces. Sealed surfaces inhibit penetration.
• May be applied using sprayer, roller or brush onto the woods surface.
• Requires no back brushing and will nerver leave runs, laps, or streaks.
• Requires no wet-line application, the product will blend itself and can be applied in any temperature range for proper application.
• Requires no diluting or thinning prior to spray applications.
• Subject to or will include a PaintCare recycling fee in the following states: CT, or VT. Not available in CA.
• Easy maintenance - no sanding or stripping required for re-application

User questions & answers

Question:	What is the warranty on this
Answer:	I don't believe there is any warranty. We applied it two years ago and the covered areas still look good. The section in direct Sun...needs to have it applied again.
Question:	How long can the product be stored once the container is opened
Answer:	We actually used some that we had stored in our garage that was left over from the last time we stained our siding and that was in the summer of 2012, 6 yrs ago. When we removed the lid, it looked like it had become a gel but my husband used a drill with a paint mixer/stirrer tool and it became liquefied again. We applied it to the siding without incident and the color matched the new 5 gallon containers we bought this summer .
Question:	I have 275 ft of fence plus a gate- what's the coverage with using a sprayer
Answer:	I’m in the process of staining my fence (I am using a different brand) with a semi-transparent stain. I have 187’ of fence at 5’ high including 2 gates. Applied with a roller and brush, I’m going to need around 13 gallons. My recommendation is rent a sprayer from Home Depot. You’ll save time and money as you’ll use less product and it will go much much faster.
Question:	we have a heavy dining set and i am worried about scratches after i stain, how does it hold up to heavy chairs moving back and forth
Answer:	I have a deck/patio furniture set, including a cast iron umbrella base. Lots of use over the last year with no evidence of scratches in the deck. The stain penetrates the wood rather than building a barrier so dragging stuff across the boards won't take it off provided the wood is properly prepared.

Product features

Application

1. Use a brush, roller or sprayer to apply Ready Seal.

2. Blend multiple containers together to ensure color consistency.

3. Apply two light coats to wood surface and allow at least 45 minutes between.

4. Allow 48 to 72 hours of drying. Drying time will vary depending on temperature, humidity and surface porosity.

-Ready Seal contains no linseed oil and will not stain hands.

-Ready Seal is biodegradable when in contact with soil and water.

-Meets current VOC level requirements throughout the United States.

Product description

The Wood Defender Transparent Fence Stain utilizes ultra-fine Trans Oxide pigments to highlight and reveal all of the wood grain while staining the fence. Trans Oxide pigments are ground so fine, they are very resistant to UV rays. The Transparent Fence Stain is commonly desired on a new cedar or redwood fence where the customer is striving to highlight and glorify the existing wood beauty. The Transparent Fence Stain and sealant is backed by a 2 year manufacturer’s warranty.

User questions & answers

Question:	How do you open the metal can
Answer:	You can use a flat head screw driver to get the lid off or they sell actual paint lid tools at the hardware store.
Question:	How long has this lasted with lots of sun
Answer:	It’s been on my fence 1 year and still looks fantastic! Had plenty of sun, rain and some snow. I think it says 3 years?
Question:	How many feet does 5gallon cover
Answer:	5 gallons cover 625 sq. ft.
Question:	Does it work on concrete
Answer:	No I do not think it would work on any concrete or stone surface. It's not a paint and I think it would not soak in. I have used it on my wood deck and fence but it really works better on a wooden fence.

Product description

Olympic Maximum stain + sealant in one, semi-transparent, is a great stain & sealer that can be used on exterior horizontal and vertical surfaces. It provides enhanced waterproofing and sunblock UV defense to strengthen, protect, and condition wood fibers, ensuring the wood's natural beauty lasts. Olympic maximum with weather-ready application is also specifically formulated to allow you to stain when you want, not when the weather dictates all while getting the same excellent results. Weather-ready application provides four great benefits: 1) you can clean and stain your wood on the same day - even after rain. 2) the stain is rain-ready after just 8 hours. 3) the stain can be applied when air and surface temperatures are as low as 35 Degrees Fahrenheit. 4) If the surface is too hot to touch, lightly mist the surface before application of the stain. Olympic - America's most trusted brand since 1938. Olympic - exterior wood stain for decks & more.

• Enhanced waterproofing protection to help make sure your wood is protected from cracking due to water

User questions & answers

Question:	Title says 3 gl, options offers 5 gl. i click on 5 gl to the order but the order form shows 3 gl. so am i getting the 3 or 5 gl
Answer:	ask amazon that one
Question:	Can this product be used in a paint sprayer
Answer:	Yes. Do not thin or dilute this product.
Question:	Where can I get the clear in 5 gallon buckets? I love my new fence and don't want to apply any stain color
Answer:	Amazon
Question:	I am looking for "olympic natural look protector plus sealant ", for my red wood deck. is this the same one
Answer:	Hi there, the closest current product to the natural look protector plus is the Olympic Maximum Transparent/Toner product not the semi-transparent.

Product features

Stain + Sealant in One

Stain + Sealant in One protects and beautifies in one step.

Weather-Ready Application

Allows greater opportunities for staining when it may rain or when the weather may be too hot or cold.

Enhanced waterproofing protection

Helps make sure your wood is protected from cracking due to water.

Advanced SunBlock UV

Helps protects your wood from dangerous UV rays that can wear down the coating.

How much stain do you need to buy?

One gallon of wood stain covers approximately 250-350 square feed, which is enough for a small to medium deck. It should also cover both sides of a 25 foot long fence or a couple pieces of furniture.

Two Gallons

Two gallons of wood stain cover approximately 600 square feed, which should be more than enough for the standard deck project or a 50 foot long fence.

Three or more Gallons

Three or more gallons of wood stain will most likely only be needed on large projects, as they should cover over 850 square feed.

Note: Solid Color Stain requires two coats. You should effectively double your gallons purchased when using a solid.

How To Stain Your Wood Deck In 3 Easy Steps

Sweep debris from deck and then use a product such as Olympic Premium Deck Cleaner to penetrate the wood and lift dirt to the surface to be cleaned, as well as clean stains caused by mildew, dirt, algae and mold. Allow surface to dry.

STEP 2

Tape off any surfaces you don’t want stained. Also, avoid staining in direct sunlight or on hot surfaces because the stain will dry too fast to penetrate properly.

STEP 3

For clear, toner and semi-transparent stains, apply a thin coat with a high-quality brush, roller, paint pad, or spray. For solid stains, apply two thin coats with a brush, roller, or paint pad. To avoid lap marks, apply to a few boards at a time, keeping a wet edge.

For best results, backbrush into the surface to work finish into the wood and ensure the coating is even. Make sure to treat all areas of the wood, including joints, edges and ends.

You’re going to want to follow the directions on your stain container to determine if anything needs done after your final application.

Olympic Wood Stains: A reputation as durable as our products

Olympic Wood Stains has provided exceptional protection and durability for all wood types, applications and budgets since 1938.

Nothing protects and beautifies your wood like Olympic Exterior Stain. Trust the natural beauty of your wood to Olympic Stains.

Olympic Paints and Stains guarantees satisfaction with the application and performance properties of this product when applied to a properly prepared surface in accordance with label directions. This guarantee is limited to your choice of product replacement or refund of the purchase price. See product label for more details.

Product description

The Wood Defender Transparent Fence Stain utilizes ultra-fine Trans Oxide pigments to highlight and reveal all of the wood grain while staining the fence. Trans Oxide pigments are ground so fine, they are very resistant to UV rays. The Transparent Fence Stain is commonly desired on a new cedar or redwood fence where the customer is striving to highlight and glorify the existing wood beauty. The Transparent Fence Stain and sealant is backed by a 2 year manufacturer’s warranty.

User questions & answers

Question:	How many years does it last
Answer:	Our cedar fence posts were installed two years ago and stained with Leatherwood. They needed to be re-stained last fall, so 18 months? At that point, we could tell they needed re-stained, but they didn't look too bad. Now they look bad (i.e., washed out/faded). So it appears their two-year promise is a stretch and depends on how well the stain is applied and whether the wood is primarily in shade or sun.
Question:	is this non toxic
Answer:	Yes, this is non toxic. There are no toxic raw materials in this product.
Question:	can this be applied to pressuure treated wood decking
Answer:	“For any horizontal surfaces like decks we recommend our Wood Defender 200 Series. It is formulated for horizontal surfaces that will be tracked or walked on.”
Question:	Is it oil based and can I apply with pump up sprayer
Answer:	Hello and thank you for your question. Our product is in fact an oil based stain and is easily applied with a pump garden style sprayer. If you have a lot of fence to stain, a backpack style pump sprayer may allow you to complete the job more efficiently. To apply, begin at the top of the fence and simply saturate the surface which will allow the product to soak in evenly. The Wood Defender is designed to soak in evenly without any need for back-brushing to achieve a nice even uniform application. One of the most important attributes of the Wood Defender product as compared to other products on the retail market is that the stain can remain in the sprayer for extended amounts of time without causing any problems. For example, if you get started and need to take a break simply work yourself to a corner or a stopping point and set the sprayer down. You can leave the stain in the tank, hose, gun, tip without any issues. Hours later or days later, when your ready to start spraying again shake it up very well and continue where you left off! Once you've completed the job, you may clean out your pump sprayer with mineral spirits and then flush that with fresh water. Now your ready to use the pump sprayer for other projects until your fence needs to be re stained. Thank you for your interest in our Wood Defender Exterior Wood Stains and good luck with your project!

• WATER-BASED SEMI-TRANSPARENT WOOD STAIN – This environmentally friendly, water based deck stain allows the wood grain to show through with a beautiful semi-transparent, natural matte finish. It's great for staining wood decks, fences, siding, playsets, outdoor patio furniture, and more.
• FORTIFIED WITH ZINC NANO-PARTICLE TECHNOLOGY– It’s like sunscreen for your wood. Tiny zinc particles dispersed throughout the stain reflect damaging UV rays, preventing premature graying and color loss.
• EXTREMELY DURABLE, QUALITY THAT LASTS – DEFY Extreme wood stains are made with the highest quality resins available that have better resistance to fading and darkening. The result is a quality semi-transparent deck stain that typically lasts a season or two longer than competitive products. Keep your deck, fence or siding looking great for longer by using DEFY premium wood stains.
• EASY TO MAINTAIN – When it’s time to do a maintenance coat, there’s no need to sand or strip the surface again. Simply brighten the wood with DEFY Wood Brightener and apply a single maintenance coat of DEFY Extreme Wood Stain.
• 250 VOC COMPLIANT - Ships to all states except California. California residents can purchase DEFY Extreme 40, which is VOC Compliant in California.

User questions & answers

Question:	will this work in paint gun
Answer:	yes it will, that's how I applied it.
Question:	Will be applying to white cedar fence. How dry does the wood have to be
Answer:	I did not heed the "one year" to dry on the new portion of my deck. Did old and new at the same time when the new portion was perhaps 2 months old. There was a definite difference. I washed and brightened both. Also did two coats. The 2nd coat was done while the first coat was still wet as per instructions. Also brushed vs. rolled. The stain seeped into the older wood much better and the color is richer. Don't believe the stain will last for years. In covered areas yes, it does. But my deck area that gets full S.Carolina sun, does not last the year. I re-stained last year and will be doing a layer of water proofing on horizontal surfaces this year in hopes that I won't have to stain again for a while. I am still happy that I bought the water based just because of the clean up and the ease of re-staining even if I feel I had to do it much quicker than if I had used oil based.
Question:	Can I use this on my new cream colored bamboo blinds? Unsure about the method they were colored, but almost no sheen. Want stain protection in kitchen
Answer:	Hard to say without looking at the wood , but if the wood still looks porous enough we're the Stain can soak in some I would think a light coat possibly 2 would do it. It's very thin milky color but dries clear
Question:	I am applying this to a fence. Would you recommend it for fences? Also, if you have used this product how well is it holding up
Answer:	Using it for 10 years, great on fences. Apply W weed oil sprayer. Brush W 4" throw away brush as needed. Time between coats varies W the look you want. 2-3 years looks great. At 5 years fading is noticeable. Apply when cool. Dampen surfaces to get soak in.
Question:	Can I use this on kitchen cabinets made with walnut veneer? My goal is to keep the natural raw, light look but also see the grain, not milky
Answer:	No, don’t use on kitchen cabinets. Instead use water base polyurethane. Easy clean up and is just as good as oil base polyurethane.
Question:	Can this be used to seal laminate flooring
Answer:	It is not for interior use. Also you cannot stain , paint or varnish over Seal-Once products. Seal-Once must be applied to raw wood.
Question:	Can this be used over an oil base stain
Answer:	No.
Question:	What’s the best product for Douglas fir pergola
Answer:	No, this Seal Once product is not made for pergola floors, it has a dull finish. Not shiny. I would think you would want a poly eyrthane, which is durable and has a shine, recommend a semi-gloss. I would suggest you go to Sherwin Williams and consult their opinion.

Product features

About SaverSystems

At SaverSystems, we understand the frustration people feel when they see what they've built deteriorate from the elements. Property is one investment you can bank on, but if it's made with concrete, masonry, or wood it needs to be protected. SaverSystems employs state of the art technology to help protect and save what you build.

SaverSystems has manufactured premium quality, water repellents and protective coatings for over 30 years. We make coatings for a variety of surfaces including wood, concrete, masonry. In addition to the DEFY brand, SaverSystems also manufactures ChimneyRx, MasonrySaver, & ChimneySaver branded products.

All of our products are manufactured in our production facilities located in Richmond, Indiana. Every product is produced under strict quality standards and formulated with the highest quality raw materials available. Our innovative solutions and coatings have stood the test of time, and are trusted by industry professionals and homeowners alike.

Product description

Thompson's WaterSeal Waterproofing Stain provides complete outdoor wood protection. It waterproofs long after the initial water beading is gone. Use on decks and fences, outdoor furniture and exterior wood. Shows medium wood grain and medium color. 1-coat protects 4 years on decks or 6 years on fences and siding. Applies to freshly cleaned damp or dry wood. Prevents water damage. Advanced polymers provide fade resistant color. Coating resists mildew and UV damage.

• Prevents Water Damage
• Advanced Polymers Provide Fade Resistant Color
• Coating Resists Mildew and UV Damage
• Applies to Freshly Cleaned Damp or Dry Wood
• Exceeds Industry Standard ASTM D-4446 for Waterproofing Wood

User questions & answers

Question:	The listing says semi-transparent, but the picture says transparent, which version is this
Answer:	Semi
Question:	Is this a gallon container of the product
Answer:	Yes this is a one gallon of Thompson water seal
Question:	what clear seal do you recommend to use on 12year old pressure treated planks
Answer:	I've used Thompson's water-based semi-transparent stain/sealer 3 times now for my 15 year-old pressure-treated deck and it has always done a great job of covering and protecting the wood. It doesn't really last the 4 years they claim, but still very good. They also make an oil-based clear sealer and I use that on my cedar pergola, also very good stuff but it's hard to work with because it doesn't cleanup with water. As an alternative to the oil-base they have an all-purpose water-based clear sealer for wood and masonry. I would use that on my pergola if it was made of pressure treated wood, but with cedar I really want a penetrating oil. So for your pressure treated deck, I would recommend the water-based clear sealer. Given how well the semi-transparent stain has worked for me, I would expect good results with the clear as well. You will certainly want to clean the wood first if you expect to brighten the gray appearance of aged wood. I spray oxygen bleach on the wood first and then scrub with a stiff brush and rinse before sealing.
Question:	Would this product work well on untreated Adirondack furniture
Answer:	Yes, I think it would be suitable. I have only used it on my deck however. Good protection in a wet climate. Rub it down well after it dries to keep the color from getting on clothes though if you're using a color stain.

Product features

The Thompson's Company has earned a well-deserved reputation as identifying industry trends and emerging technologies.

In the early 1920’s, polymer chemist Edward Addis Thompson developed a formula that protected buildings from exterior water damage. His discovery became known as Thompson's WaterSeal Clear Multi-Surface Waterproofer and initially was used by architectural and construction firms for concrete applications.

• PROTECTS AGAINST COLOR FADE AND PREVENTS GRAYING - #1 Deck Protects Wood From Damage Caused By Exposure to the Elements. Can Be Used On Pressure Treated Pine, Cedar, Fir, Redwood, or Most Other Softwoods. Hardwoods Will Require More Frequent Maintenance Coats.
• BOTH A DECK STAIN & DECK SEALANT IN ONE - #1 Deck Stain Is a Dual-Purpose Stain & Sealer. It Adds Color to Your Wood and Seals it, Preventing Damage Caused by Water Penetration.
• ALLOWS THE WOOD GRAIN TO SHOW THROUGH - Available in 5 Beautiful, Semi-Transparent Deck Stain Colors That Dry to Flat, Natural Looking Finishes That Will Enhance the Beauty of Your Exterior Wood.
• BETTER FOR THE PLANET, EASY SOAP & WATER CLEANUP - With Less Than 50 g/L VOC Content, #1 Deck Sealer Is a Better Choice For Our Planet. Clean Up is Super Easy - Just Use Soap and Water.
• WORKS ON DAMP WOOD, MINIMIZING THE WAIT TIME BETWEEN CLEANING AND STAINING - Once Your Wood Deck Is Visibly Dry, It's Ready to Stain.

User questions & answers

Question:	In the reviews, everyone mentions the light oak color but I don’t see it available. Is it discontinued or renamed
Answer:	I bought 2 gallons of light oak about a month ago. Look again or call the company.
Question:	Can I reapply this over the old coat when I need to
Answer:	I'd clean the boards the best you can and let them dry, and then yes, you can reapply it. It says so on the can.
Question:	How many sq ft will 2.5 gallons cover
Answer:	depends. cover says 100 - 150 sq ft per gallon. I used 7.5 gallons on about 600sq ft of deck and barely had enough, that was 2 coats. 1st coat sucked up a lot, 2nd coat went a lot farther
Question:	How many years on before having to reapply
Answer:	I live at 9000 ft. in the mountains- .wind, rain, snow, UV. I try to touch up every 2-3 years.
Question:	Difference between marine formula? Why wouldn’t I want marine formula on my land fence
Answer:	Look at our Nano and Multi -Surface Concentrate. Clear will allow the wood to grey naturally.
Question:	Can this product be sprayed
Answer:	Apply first coat with a synthetic brush; pump-up garden sprayer; air-assisted; and/or airless sprayer. Use 15-17 tip and medium to coarse spray pattern. When spraying, always back brush for best results. Second coat can be applied once first coat has penetrated but is still damp. Second coat must be applied within one hour of applying first coat.
Question:	How well does this work on pressure treated decking...near the beach
Answer:	Never received it. Said there was a problem with delivery. 😱 ????????????????
Question:	can I apply epoxi pain over
Answer:	No

Product features

About SaverSystems

At SaverSystems, we understand the frustration people feel when they see what they've built deteriorate from the elements. Property is one investment you can bank on, but if it's made with concrete, masonry, or wood it needs to be protected. SaverSystems employs state of the art technology to help protect and save what you build.

SaverSystems has manufactured premium quality, water repellents and protective coatings for over 30 years. We make coatings for a variety of surfaces including wood, concrete, masonry. In addition to the #1 Deck brand, SaverSystems also manufactures DEFY, ChimneyRx, MasonrySaver, & ChimneySaver branded products.

All of our products are manufactured in our production facilities located in Richmond, Indiana. Every product is produced under strict quality standards and formulated with the highest quality raw materials available. Our innovative solutions and coatings have stood the test of time, and are trusted by industry professionals and homeowners alike.

• Water-based sealer with advanced penetrating nanotechnology & added strength of Polyurethane. This premium wood sealer performs like an Oil-based product, without any noxious solvents or toxic chemicals.
• Great investment to enhance and extend the natural life of wood. Protects against water damage for up to 10 years on vertical surfaces & 6 years on horizontal.
• Ultra Low-VOC wood sealer safe for people, pets, plants or marine life. Easy to apply with soap & water clean-up. Save time with wet on damp application.
• Prevents warping, cupping, wood rot, mold, mildew, staining, decay & will not peel like many topical sealers that only form a top-coat.
• When used as a wood stain creates a UV barrier to prevent fading. Rich color palette available in 11 different color tints. Clear formula allows wood to turn gray naturally

User questions & answers

Question:	What color is this sealer? On the can it says clear but in the description it says white
Answer:	It goes on white dries to perfect wet look clear
Question:	Can this be used on raised beds? Both inside and outside of the bed
Answer:	You may use this product, however, the inside of the box will not be protected as it would be against soil.
Question:	Can I use this on the inside of a terrarium? I'm making one out of wood, and I need the inside to be water proof, as it will be very humid
Answer:	We would not recommend our products for this application. It will be too much constant contact with moistures in an enclosed area.
Question:	Why shouldn't the product be used in doors? What would you recommend on doors
Answer:	Seal-Once products are completely penetrating and are non film forming. The door will still look like raw wood after it is applied. You cannot apply stain, paint ,polyurethane, or varnish over Seal-Once products. Also, Seal-Once products must be applied to raw wood.

Product features

The Science of SEAL-ONCE and Innovative Use of Nanotechnology in Wood Finishes & Stains

Unlike many top-coat sealers sold today that trap moisture below the surface, NANO+POLY creates a flexible, breathable barrier which allows water vapor to escape. This key feature helps prevent damage to wood caused by water intrusion, such as: wood rot, decay, mold & mildew growth, cracking & splitting. Typical wood sealers form a barrier on the surface of the wood, trapping moisture below the surface. As the water evaporates, it causes the surface coating and the substrate to crack & peel, leaving a broken surface that requires continued maintenance and is susceptible to additional damage. SEAL-ONCE uses cutting-edge, nano-particle technology to allow wood to breath and help prevent water vapor damage by protecting wood from the inside out.

Water-based Product that Will Not Harm People, Pets, Plants, Livestock or Marine Life.

SEAL-ONCE products are ultra-low VOC, low odor, non-toxic, non-flammable and non-ozone depleting. They are safer for the environment and do not contain nitrates, phosphorous compounds or heavy metals like many Oil-based sealers & stains on the market today.

Quick & Easy Application

Apply first coat with a synthetic brush; pump-up garden sprayer; air-assisted; and/or airless sprayer. Use 15-17 tip and medium to coarse spray pattern. When spraying, always back brush for best results. Second coat can be applied once first coat has penetrated but is still damp. Second coat must be applied within one hour of applying first coat. For best results, apply in the shade and out of direct sunlight.

Available in 11 Tinted Wood Stain Colors

NANO+POLY can be tinted for use as wood stain in any of the 11 color tints available: Clear, Light Brown, Natural, Brown, Mahogany, Redwood, Bronze Cedar, Cedar, Black, Battleship Gray, Shale Gray & Cape Cod Gray. The tints are sold separately and when mixed with Clear, the tinted formula provides additional UV protection from harmful sun rays.

Surface Preparation & Coverage

Approximate coverage: 250-350 sq. ft./gallon per coat. Actual coverage will vary due to the porosity of the surface. All surfaces should be cleaned with SEAL-ONCE All Wood Cleaner before sealing for best penetration and performance. Remove all old coatings, dust, debris and loose material. Remove oil, grease, algae, grime, mill glaze and mold and mildew stains with appropriate cleaners.

Product description

Cabot 140. 0019202. 007 Wood Toned Deck & Siding Low VOC Exterior Stain, Gallon, Cedar

• A translucent oil finish that protects and beautifies wood's natural appearance
• Water repellent; deep penetrating
• Ideal for decks, siding, fences and trim
• Available in 5 wood toned colors
• Not intended for interior surfaces

User questions & answers

Question:	Can this be applied to a deck that the wood is pine treated wood
Answer:	Some say wait a year to stain and some say do it right away. I called Cabot with a question at 1-800-877-8246 and they answered pretty fast. I used this on an old deck and it came out very dark but I was ok with that. Couldnt find 7 gallons all at one place. Had to brush it all in to look good. $40 for a gallon is a good price. Accidentally bough $40 for a quart. Make sure you read description. This is a special oil/water mix. It rinses with water.
Question:	Is this easily removed from metal balusters? Does the natural make the wood much darker
Answer:	Yep, just have rag with you and wipe it off. This is a great stain, highly recommend it. So, I purchased the Natural Cedar, the stain looks milky in the can, but applies and as it drys, gives a rich Cedar color.
Question:	How many square feet (approximately) will a 1-gal can cover
Answer:	If you sand/prep before and wash planks - 1 gal will get you at least 350 sq feet.
Question:	What is the difference between the Heartwood 19204 and the Heartwood 3004? Thanks
Answer:	You can call Cabot at 1-800-US-STAIN (877-8246) and they answer pretty quickly. The 19204 is probably the new miscible oil/water mix. And the 3004 would be the classic oil mix. You cannot mix the two or use one on top of the other but you can clean the 19204 brushes after with water. They claim the new mix is more durable.

Product description

Peeling paint and gray wood. Two weekends spent power washing, sanding, and re-staining. Repeat every year or two. Sound familiar? You need Sashco Transformation Stain Deck and Fence. Its unique oil-in-water formula combines the foot traffic hardiness of an acrylic with the water-repellent penetration of an oil-base to give you a wood deck stain that looks good and won't peel. Maintenance is a snap with a simple power wash and re-coat. Weekend warriors - unite! But this time, have a party to enjoy your deck instead of restoring it.

• Great for wood siding, trim, decks, fences, and interiors
• No peel formula – looks beautiful year after year*
• Semi-transparent to show off the beauty of wood grain
• Oil in water hybrid formula – protection of an oil with easy water clean-up
• Ideal dry time – not too slow to create weeks of sticky surfaces, not too fast to cause lap lines
• Compatible with all Sashco caulking and chinking products – because all wood homes will need some caulking
• Exquisite color portfolio – rich colors and a matte finish create a natural look

User questions & answers

Question:	Can this be strayed onto a fence
Answer:	Transformation Siding & Trim stain can be used on fences. For optimal performance, we recommend that the fence be cleaned well and any grayed/sunburnt wood sanded down prior to application. For more information, please visit our website at https://www.sashco.com/log-home/ or call us at 1-800-767-5656.
Question:	Is the item provide slip resistance
Answer:	Transformation Siding & Trim does not provide slip resistance. Because it does not dry to a high shine, it is less likely to be slippery when wet. You can add something like Shark Skin to the top of the stain for slip resistance.
Question:	Do you need to use a sealer along with this product
Answer:	Transformation Siding & Trim is meant to have 2 coats applied (1 heavy flood coat, 1 lighter 2nd coat). There is no additional sealer required. If you would like to talk to one of our product specialists, you can email us at [email protected] or call us at 1-800-767-5656.
Question:	So it says semi-transparent and I’m wondering how much tint is in the Natural color. I am looking for a light golden color for my exterior ceiling
Answer:	The Natural is one of the lightest colors in the Siding & Trim line. You can see quite a bit of the wood character through it. We ALWAYS recommend brushing out samples of the stains, because your wood will contribute quite a bit to the finished look. You can get free samples by calling us at 1-800-767-5656.

Product description

#1 Deck Premium Fence Stain is an advanced, water-based, exterior semi-transparent stain formulation designed to penetrate deep into wood pores for maximum protection and longevity. It protects wooden fences from harmful UV rays and damage caused by water penetration. #1 Deck Premium Fence Stain is safe to use, has a low odor, and is easy to clean up with soap and water. It is is ideal for all wood types other than composite lumber. It can be used on pressure treated fences, cedar fences, redwood fences, and more. This outdoor sealant can be applied with a brush and roller, or spray it on with a pump-up, or airless sprayer. Available in 1 gallon and 2.5 gallon sizes.

• Long Lasting Fence Sealer - 3 Year Warranty on Fences
• Easy to Apply Water-Based Fence Stain - Use an Airless or Pump Sprayer, or Brush & Roller
• Available in 5 Semi-Transparent Colors Including Driftwood Gray, Natural, Cedar, Dark Walnut, & Light Walnut
• Waterproof Protection for All Wood Surfaces Including Fences, Decks, Siding, Log Home Boards
• Resists Fading, Graying, & Peeling on All Vertical Wood Surfaces

User questions & answers

Question:	How many square feet of coverage in a gallon
Answer:	Really depends on condition and treatment of wood. Older unfinished fencing can absorb twice the stain. So anywhere from 150 to 300 sq ft per gallon. New fencing nearer the 300.

• Wood deck protector - A true oil-based semi transparent stain and sealer meant to protect and highlight the natural beauty of the wood grain.
• Storm Wood Stain Protector is a semi transparent sealer that penetrates deep into the wood for added protection against Mother Nature.
• Compatible with any wood species. Great for wood staining Mahogany, as a Mahogany sealer, Cedar sealer, Cedar fence sealer, Redwood, Pine wood stain, Douglas Fir, Spruce Stain, Cyress, and Pressure Treated.
• Great for Decks, Fences, Siding, and other Wood Substrates. Can be used as a wood fence protector or any other wood substrate protector.
• Applies easily with brush, roller, or spray application. Lap-Free Application & UV Protection

User questions & answers

Question:	Does it take a long time to dry
Answer:	We have had a ton of rain so I have not used it yet.
Question:	How cold can I apply this to my covered porch?? Thanks rr
Answer:	Hello, The application temperature must be between 50-90 F.
Question:	Should I wipe down the wet spots after a few days of drying
Answer:	Hello, Yes lightly wipe those spots and and make sure those areas are dry before putting into use. note: wet spots could have been caused by a lack of penetration into the wood (a previous stain or sealant could be the culprit), applying to heavy, or the presence of moisture in the wood.
Question:	How do you open the plastic seal lid
Answer:	Hello, Thanks for your question on this. The plastic lid can be slightly difficult to take off, but is applied to ensure safe transport. To remove, I have found that a paint can opener or flat head screw driver wedged either in the top or on the side on the can works pretty easily. Be sure not to use a hammer to try and wedge the flat head screw driver in, as you want to avoid damaging the metal can.

Product features

STORM PROTECTOR EXTERIOR STAINS KEEPING THE EXTERIOR BEAUTIFUL

Storm Protector stains are designed to stand up to whatever comes down. Whether it's months of baking sunlight and damaging ultraviolet rays, seemingly endless rain or brutal winters marked by ongoing cycles of freezing and thawing. Our Storm Protector Stains are there to ride out the storm.

Storm System

Storm Protector is a Semi-Transparent penetrating stain and sealer meant to protect and highlight the natural beauty of the wood grain.

Penetrates Deep into the Wood Grain

Storm Protector penetrates deep into the wood for added protection against Mother Nature.

Compatible with Most Wood

Storm Protector is compatible with any wood species including: Redwood, Cedar, Pine Douglas Fir, Spruce, Cypress, Mahogany, and Pressure Treated.

EASY APPLICATION

LONG LASTING BEAUTY

PERFECT SOLUTION FOR DECKS AND RAILINGS

• Opaque Finish Completely Hides Wood Grain & Provides Maximum Protection Against Fading & Graying Caused by Damaging UV Rays
• Acts as Both a Stain and Sealer for Your Wood - Use Over Top of Existing, Solid Color Wood Stains (that still have good adhesion)
• Available in 6 Beautiful, Solid Color Finishes That Dry to a Flat, Natural Looking Finish
• Low Odor Stain, Water-Based Cleanup - Low VOCs (<60 g/L)
• For Use on all Horizontal and Vertical Wood Surfaces Including Pressure Treated Lumber, Pine, Cedar, Fir, Redwood, Mahogany, & More

User questions & answers

Question:	How much does 1 gallon cover
Answer:	About 1/4 of an 8x12 shed. I used 4 gallons for the whole shed
Question:	Will this work with a paint gun
Answer:	Yes, this product works well with an airless sprayer
Question:	Is there any texture to this solid stain? Does it last without peeling for a couple years
Answer:	There is no texture, just a smooth paint that took the texture of what we painted it on. No idea on the peel, only just used in the last couple weeks.
Question:	How much do I need for a 24’ x 18’ deck
Answer:	This is a water based product and as such gets a better coverage area. The product should yield approximately 600 SF. However, when staining a deck, you'll not meet that coverage area if you use an airless paint sprayer. Typically the average would be 450 - 475 SF. If you roll it, you should expect to get between 500 - 525 SF.

Product features

About SaverSystems

At SaverSystems, we understand the frustration people feel when they see what they've built deteriorate from the elements. Property is one investment you can bank on, but if it's made with concrete, masonry, or wood it needs to be protected. SaverSystems employs state of the art technology to help protect and save what you build.

SaverSystems has manufactured premium quality, water repellents and protective coatings for over 30 years. We make coatings for a variety of surfaces including wood, concrete, masonry. In addition to the #1 Deck brand, SaverSystems also manufactures DEFY, ChimneyRx, MasonrySaver, & ChimneySaver branded products.

All of our products are manufactured in our production facilities located in Richmond, Indiana. Every product is produced under strict quality standards and formulated with the highest quality raw materials available. Our innovative solutions and coatings have stood the test of time, and are trusted by industry professionals and homeowners alike.