12 best diy stud finder
A DIY stud finder is a handy tool used in carpentry and home improvement projects to locate the wooden or metal studs hidden behind walls. It is a valuable tool for tasks such as hanging pictures, shelves, or mounting heavy objects, as it helps prevent damaging the structure of the wall by drilling or nailing into a stud.
Here are some key points about DIY stud finders:
Types of Stud Finders: There are primarily two types of stud finders - magnetic stud finders and electronic stud finders.
Magnetic Stud Finders: These are simple devices that use a small magnet to detect screws or nails in the wall, which are typically anchored to studs. When the magnet reacts to a metal fastener, it indicates the presence of a stud.
Electronic Stud Finders: These devices use sensors to detect changes in density or material behind the wall. They can provide more accurate results compared to magnetic stud finders. Some electronic stud finders can also indicate the width and edges of the stud.
How They Work: Electronic stud finders work by sending out signals or beams into the wall and measuring the return signals. When they encounter a change in material density (from drywall to a wooden or metal stud), they indicate the presence of a stud.
Calibration: Before using an electronic stud finder, it's important to calibrate it on an area of the wall with no obstructions. This helps ensure accurate results.
Usage: To use a DIY stud finder, you typically move it horizontally across the wall until it indicates the presence of a stud. Then, you mark the location of the stud and use this information for your project.
Accuracy: The accuracy of a DIY stud finder can vary depending on the quality of the device and the type of wall it's used on.It's a good idea to follow the manufacturer's instructions for the best results.
Price Range: DIY stud finders are available at various price points, with basic magnetic stud finders being more affordable than advanced electronic ones.
Other Features: Some electronic stud finders come with additional features such as built-in levels, LCD displays, and the ability to detect live electrical wires behind the wall.
In conclusion, DIY stud finders are essential tools for anyone involved in home improvement or carpentry projects. They make it easier to locate studs and avoid damaging the wall. When using a stud finder, it's important to follow the instructions carefully to ensure accurate results.
Below you can find our editor's choice of the best diy stud finder on the marketProduct description
The world's best stud finder has now gotten even better! Now supports Lath and Plaster with new smooth scanning strips and enhanced product casing. The Walabot DIY Plus detects metal studs, wood studs, wires, pipes and can show movement behind walls. The Walabot DIY Plus can be used by contractors, electricians, plumbers, carpenters, and those in need of advanced wall imaging capabilities. The advanced technology is also perfect for DIYers and those who want real-time visual images of what is hidden within a wall.
- See it, don’t hear it! Use cutting-edge technology to see clearly inside your walls. Don’t just rely on a ‘beep’.
- See wooden studs, metal studs, pipes and wires.
- See movement and locate pests inside walls.
- Works on drywall and lath & plaster walls.
- Detects up to 4 inches (10 centimeters) into your walls.
- Automatically finds and shows the center of the stud.
- A mobile app offers continuous upgrades and feature improvements.
User questions & answers
Question: | does it work with a galaxy s |
Answer: | AN SAE MEASURING WHEEL. I HAVE BEEN USING THIS DAILY OVER THE LAST TWO YEARS FOR FUMIGATION ESTIMATES. VERY WELL CONSTRUCTED AND ACCURATE. |
Question: | Is it true that the app forces you to enter your google account and PW, to share your data with foreign companies, or else you cant use it |
Answer: | The weight of the unit itself is approximately 4 pounds, 3 ounces. If you have any additional questions, please call our customer service team at 800-345-3766. Thank you! |
Question: | Does it work through tile |
Answer: | The metric version of this wheel is also available. It is the RRT12M. We also offer this is 10ths, which is the RRT1210. |
Question: | What is the difference between Walabot and walabot plus |
Answer: | Yes but product no well built |
Product features
The Walabot Difference
See it, don’t hear it! Other stud finders beep to alert you that an object has been found behind your walls without showing you whether the object is a stud to drill into or a pipe or wire to avoid? Now you can be safe with the Walabot DIY Plus. Only Walabot uses cutting-edge radar technology to allow your smartphone to show you actually what is behind your walls.
Walabot DIY Plus Wall Scanner
Walabot DIY Plus is paired with an Android phone (see specifications for details) to produce a visual image of what is inside drywall and lath & plaster up to 4 inches (10 cm) deep. Your Walabot detects metal studs, wood studs, wires, pipes and can even find pests by showing movement behind walls. Walabot can be used by contractors, electricians, plumbers, carpenters, and those in need of advanced wall imaging capabilities. The advanced technology is also perfect for ambitious DIYers and those who want real-time visual images of what is behind a wall. It can show users what is in their wall in multiple modes (Image mode and Expert mode).
Image Mode: A visual image of metal and wooden studs, pipes, and wires.
To use image mode, hold the Walabot against the wall, calibrate and scan the wall. Walabot’s Radio Frequency technology will analyze the objects and using artificial intelligence, translate the results into images which are identified as wooden studs, metal studs, pipes, and wires.
Expert Mode: See the raw radar signals from the Walabot sensor
To use expert mode, hold the Walabot against the wall, calibrate and move over the objects seen in Pan and Image mode. Expert mode gives a direct view into the unfiltered Radio Frequency images. This image can show location in more detail, curves in pipes and wires, the intersection between two objects, pest movement in real time and can be used to confirm objects found in Pan and Image mode. You can focus the expert mode by managing the intensity bar to better see the objects.
Product description
Walabot DIY Plus Advanced Wall Scanner Detects wooden studs, metal studs, pipes, and wires Sees 4-inch deep inside your wall Provides 3 different sensing modes Maps large areas and allows snapshots for offline analysis Walabot DIY Protective Case and 8-Piece Accessory Kit Rugged Eco-hard EVA material Zippered case for securing your device Mesh pocket for cables and other accessories Detachable elastic wrist strap to secure case
- BUNDLE INCLUDES: Walabot DIY Plus Advanced Wall Scanner and Stud Finder for Android Smartphones with Walabot Official DIY Protective Case and 8-Piece Accessory Kit
- IDEAL FOR: The Walabot DIY Plus Advanced Wall Scanner is the perfect instrument for detecting wooden studs, metal studs, pipes, wires, and movement
- SENSING MODES: It provides 3 different sensing modes Panoramic, Images, and Expert for accurate detection. It sees 4-inch deep inside your wall
- WORKS ON: This scanner works best on drywall, concrete, and lath and plaster
- COMPATIBILITY: It works using Android phones running Android 6.0 and above with USB on-the-go (OTG)
User questions & answers
Question: | I saw a post on Facebook that this can now be used on a iPhone. Is that not the case |
Answer: | I believe 2016 - 2020 Pathfinder are the same. Mine fit perfectly tight with rubber gaskets provided. My suggestion tho when assembling do not snug down immediately put fasteners in loose to align then tighten down had to go back to learn this. |
Question: | Will this run on a LGV |
Answer: | No, it is 25 inches. However, this is a great suitcase I have used it on a plane, cruise and car. Love that it is expandable. |
Question: | Will it work on Samsung Galaxy Note |
Answer: | There is NO combination lock built into this suitcase. The two zippers that open it have eyelets that meet so you can put a lock on the zippers. I use a combination lock that I bought separately. There are instructions with all combination locks showing how you set your preferred 3 numbers, but again, a combination lock isn’t included with this suitcase. |
Question: | does the "complete kit" (walabot & accessory kit) include protective film(s), like the $40 separate kit |
Answer: | No, it's too big to be carried on and must be checked. I bought it with a companion tote that can be carried on. |
Product description
The MultiScanner A250 is Zircon’s newest electronic stud finder, metal detector and live AC scanner that is sold exclusively on Amazon. The A250 is designed with a smooth, ergonomic rubber grip allowing for a comfortable yet secure hold for any size hand, at any angle. This multifunctional surface scanner uses the most recent technology in density detecting software and circuitry. The Zircon A250 has a 4-mode selector switch making it easy to change functions while the ultra-bright LCD screen, patented SpotLite Pointing System, and audio tone all indicate the location of the target. This Zircon scanner also comes equipped with a Signal Strength Indicator that helps to distinguish between shallow and deep targets. The MultiScanner A250 includes a backlit display for hard to see places and ACT (Auto Correcting Technology) that automatically corrects common user errors, such as when scanning begins over a stud, in addition to a Low Battery Indicator to alert its users to replace its battery for optimal performance results. The tool constantly scans its surroundings and recalibrates itself if necessary. The scanner has 2 stud scanning modes to locate the center, edges, and direction of wood and metal studs and joists behind walls, floors, and in ceilings. In StudScan Mode, the MS A250 scans up to 0.75 of an inch (19 mm) deep. Switch over to DeepScan Mode to double the scanning depth to 1.5 inches (38 mm). Metal Scan Mode locates non-ferrous metal, such as copper pipes, up to 1.5 inches (38 mm) deep and ferrous metal, such as rebar, up to 3 inches (75 mm) deep. Metal Scan Mode finds studs behind lath and plaster walls, tile, drywall and stucco walls by identifying the consistent pattern of screw or nail heads in the studs. The A250 is programmed with a Wire Warning Detection feature that indicates the presence of live, unshielded electrical wires up to 2 inches (50 mm) deep when using StudScan, DeepScan and Metal Scan Mode. In addition to Wire Warning Detection, the A250 also includes AC Scan Mode to detect, locate, map, and trace live wires. The Zircon MultiScanner A250 is a perfect choice for serious users, such as home improvement hobbyists and professional contractors. With the Zircon MultiScanner A250, you can safely maneuver through the most complicated of projects with the professional confidence that comes from owning a Zircon.
- The Zircon MS A250 is an electronic edge and center stud finder, ferrous and non-ferrous metal Detector, and live AC wiring scanner sold exclusively on Amazon
- Wire Warning Detection indicates the presence of live, unshielded electrical AC wiring while scanning in StudScan, DeepScan, and Metal Scan modes
- Signal strength indicators help distinguish shallower targets from deeper ones as act (auto correcting technology) automatically corrects common user errors, such as when scanning begins over a stud
- Ergonomically designed grip allows a comfortable hold on the tool for any size hand, at any angle while the patented spotlite pointing system clearly indicates the target location
- One fully charged 9V battery, not included, is required for the stud scanner to run at optimal performance to help you easily find studs, metal and live AC wiring while avoiding electrical hazards
User questions & answers
Question: | Will it work with brick walls |
Answer: | Hi. If your drywall is attached to a layer of plywood that is attached to the stud(s), then, yes, it can work. Keep in mind, the "stud scan" mode is designed (optimized) for a single layer of 1/2" drywall. Any surface thicker than that, you would need to use the "deepscan" mode. The deepscan mode scans down approx. 1&1/2". Please feel free to contact us. Technical and product support services are available free of charge during normal business hours Mon. thru Fri. 8:00am to 5:00pm PST. Please visit the Zircon website for contact info. Thank you. |
Question: | Question before i send this a250 back. the scanner was inside an unsealed bubble-wrap bag inside shipping box. no packaging. is this normal |
Answer: | Hi. Zircon does not manufacture a case for this scanner, however there are third party offerings you will find on Amazon. Just search : "zircon stud finder" in tools and home improvement. There are a few offerings available. I hope this information is helpful. Thanks. |
Question: | Can this find studs behind composite/concrete siding |
Answer: | Hello Pablo. No it is not able to find PVC water pipes. Thank you. |
Question: | Does it come with a case |
Answer: | If your house was constructed using metal studs then - perhaps. I had a hard time getting mine to pick up a stud. I was installing a shelf at my sister-in-law's Condo and could not get it looking ok where the studs were "detected" so, I went with the screw in wall board type. 1st one was destroyed because there was a stud there so, draw your own conclusions. |
Product features
Zircon MultiScanner A250
The MS A250 is a handheld tool dedicated to quickly and efficiently find studs, detect metal and scan for live AC wiring. The A250 comes equipped with 4 scanning modes: StudScan, DeepScan, Metal Scan and AC Scan.
4 Mode Multifunctional Wall Scanner with Backlit Display
The Zircon MultiScanner A250 makes scanning easy with its newly designed ergonomic grip. The scanner's StudScan and DeepScan Modes locate the edges and center of wood and metal studs and joists behind walls, floors and ceilings. StudScan finds shallower wood or metal studs up to 0.75 in. (19 mm) deep while DeepScan doubles the scanning depth to 1.5 in. (38 mm).
Metal Scan locates both non-ferrous (non-magnetic) metal, such as copper pipe, and ferrous (magnetic) metal, such as rebar. The A250 is able to detect non-ferrous metal up to 1 in. (25 mm) deep, and ferrous metal up to 3 in. (75 mm) deep.
AC Scan Mode allows you to narrow the location of live AC wiring up to 2 in. (50 mm) deep. With AC Scan, the MS A250's display changes to indicate when the tool is moving towards or away from live electricity. This enables you to adjust the tool's sensitivity to the live AC. This procedure can be repeated multiple times, as needed.
The A250 WireWarning Detection feature automatically operates in StudScan, DeepScan and Metal Scan Modes. This safety feature alerts you to the presence of live, unshielded electrical AC wires while scanning for studs and metal.
Before use, always be sure to install a brand new 9V alkaline battery. Zircon scanners, particularly those with LCD screens, require and consume a great deal of current from batteries. For optimal performance, brand-new, recently purchased alkaline batteries with an extended expiration date, are strongly recommended for use in these tools.
AC Scan
Scan Live (Hot) Unshielded Wires.
AC Scan Mode finds live, unshielded electrical wires up to 2 in. (50 mm) deep.
Before scanning, hold the A250 flat against wall and press the Power Button to calibrate. Be sure not to move the scanner while calibrating. After a short beep sounds confirming calibration is complete, continue pressing the Power Button and slide the scanner slowly against the surface.
Mark the spot where the most middle bars display. Continue in same direction until bars reduce, then reverse direction. Mark the spot where the display bars peak.
The midpoint between the two marks is the location of the live AC wiring.
Continue this process to track the wires through the walls.
Always turn off power when working near electrical wires (except when scanning)
Metal Scan
Detect Both Ferrous and Non-Ferrous Metal
Use Metal Scan Mode to locate and avoid hazards, such as pipes, behind walls and determine if a stud is wood or metal.
Metal Scan Mode detects non-ferrous metal, such as copper pipe, up to 1.5 in. (38 mm) deep, and ferrous metal, such as rebar, up to 3 in. (75 mm) deep.
To use, be sure to first calibrate the A250. For maximum sensitivity, press and hold the Power Button while holding the scanner away from the surface. Once a short beep sounds confirming calibration is complete, place against the surface to be scanned. Be sure to continue to hold the Power Button.
Just like in AC Scan Mode, slowly slide the scanner across the surface and mark the spot where the most display bars peak. Continue scanning until the bars reduce and reverse the direction.
The midpoint between the two marks is the location of the metal target.
Note: WireWarning Detection works in Metal Scan Mode. The Live AC Icon will appear when live, unshielded wires are detected.
StudScan and DeepScan Modes
Use StudScan Mode to find the center, edges, and direction of wood or metal studs up to 0.75 in. (19 mm) deep.
For best results, always start in StudScan Mode when looking for studs.
If StudScan Mode provides irregular readings, or the Signal Strength Indicator is weak, the studs might be behind deeper than 0.75 in. (19 mm). Slide the Mode Selector Switch to DeepScan Mode. This doubles the scanning depth to 1.5 in. (38 mm) deep and allows for increased accuracy on deeper targets.
Before scanning, hold the A250 flat against wall and press the Power Button to calibrate. Be sure not to move the scanner while calibrating. After a short beep sounds confirming calibration is complete, continue pressing the Power Button and slide the scanner slowly against the surface.
When the A250 finds the edges and center of a stud, 'Edge' and 'Center' displays respectively, indicating you have found your target. When the stud's center is located, the SpotLite Pointer also illuminates and a short beep sounds.
The center of the stud is the stud's most secure location. It is critical to drill in the center of a stud when mounting heavy objects.
Note: WireWarning Detection works in both StudScan and DeepScan Modes. The Live AC Icon will appear when live, unshielded wires are detected.
Auto Correcting Technology (ACT)
Automatically Have Common Errors Corrected.
This feature enables the scanner to automatically adjust for common calibration errors. It checks calibration 10 times per second and automatically recalibrates when/if needed. If scanning begins directly over a stud, the tool will transparently recalibrate, so you don't have to, and will find that stud when you scan back over it.
This recalibration is usually transparent and no indication is made. If an arrow icon illuminates, the scanner was calibrated near or over a stud and then moved away. The arrow indicates the direction of the missed stud.
Frequently Asked Questions
Question: Does the MultiScanner A250 include a battery?
Answer: No. Zircon stud finders and detectors, particularly those with LCD screens, require and consume a great deal of current from batteries. For optimal performance, a brand-new, recently purchased 9V alkaline battery with an extended expiration date, is not included but is required to properly power the A250.
Question: I inserted a 9V battery, but the scanner doesn't turn on or is giving me strange readings. Is my scanner broken?
Answer: Please be sure to use a fresh, brand new 9V alkaline battery with an extended expiration date. Batteries that may work in a smoke detector or remote control may not have adequate voltage to power the sensing technology in MultiScanners.
Question: Does this scanner need to be calibrated?
Answer: Yes, as with all Zircon scanners, the MultiScanner A250 needs to calibrate to the surface before scanning. Calibrating the scanner on an empty wall gives the device a chance to measure the wall thickness and material density, as well as register factors like humidity, temperature, and even the minor electric readings from your hand, which all have an impact on the readings from the wall. Calibrating is easy and just takes a second. To calibrate, simply place the unit flat against the surface to be scanned and press the Power Button. When powering the A250 on, all the icons on the screen and the SpotLite Pointing System will briefly flash and the scanner will beep. After this occurs, the screen will then clear and, depending on the selected mode, the words 'StudScan', 'DeepScan', 'Metal' or the Live AC Icon will remain, indicating that calibration has occurred and the scanner is ready to begin scanning. It is important not to move the scanner or begin scanning until the calibration process has taken place for the most accurate results.
Question: What does 'Center Finding' mean?
Answer: Center Finding stud finders locate both the edges and the center of wood and metal studs and joists in one step. 'Edge Finding' stud finders, on the other hand, only find the edges of studs, so you must determine the center. Finding the center of the stud to mount heavy objects is critical as the stud's center is the most secure location of the stud.
Question: What is DeepScan Mode?
Answer: Unlike StudScan Mode which scans through one layer of drywall up to 0.75 in. thick (19 mm), DeepScan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. DeepScan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. Extra layers in a wall can make it difficult to find studs in regular StudScan Mode. To minimize false positives and/or finding other objects further behind the wall that may not be a stud, always start your scan in StudScan Mode first.
Question: How can I be certain the objects found behind my wall are studs in DeepScan Mode?
Answer: DeepScan Mode has increased sensitivity so you may have located something other than a stud. Studs are equally spaced to either side (12, 16, or 24 in. apart) and typically run from floor to ceiling. To better confirm that what you found is a stud, check for other studs equally spaced to either side and for the same stud at several heights directly above and below the first stud indication. A stud reading would also measure approximately 1.5 in. (38 mm) apart from each edge. Anything larger or smaller may not be a stud if not near a door or window.
Question: Will this MultiScanner A250 locate metal studs?
Answer: Yes, the A250 will locate metal studs in StudScan, DeepScan, and Metal Scan Modes. Since stud finders are looking for a change in density behind drywall, not a particular material, in StudScan, DeepScan, and Metal Scan Modes, the detector will react to metal studs the same as it would for wooden studs. The A250 will locate wood and metal studs up to 0.75 in. (19 mm) deep while DeepScan Mode locates targets up to 1.5 in. (38 mm) deep. In Metal Scan Mode, the detector will only detect metal studs, in addition to any other metal, within its specified scan depth and range.
Question: Why does the scanner beep and the lights flash when scanning for a stud?
Answer: The scanner could've been calibrated over a stud, calibrated on a dense part of the wall, or the back of the unit may have slightly lifted or tilted during the scan. Move the MultiScanner A250 over a couple of inches to the left or right, re-calibrate, and start your scan again.
Question: What is WireWarning Detection?
Answer: WireWarning Detection is a feature that is always on while you are scanning in StudScan, DeepScan, and Metal Scan Modes to alert you to the presence of live, unshielded electrical AC wires up to 2 in. (50 mm) deep. As you approach an area with live AC voltage, the Live AC Icon will display on the LCD screen. This is the WireWarning Detection Icon. If your scan directly starts over an area with live AC voltage, the Live AC Icon will flash. Please turn off the electricity and use extreme caution in areas where live ac voltage is detected before nailing or drilling.
Question: What is the difference between AC Scan and WireWarning Detection?
Answer: Zircon MultiScanner models have a feature called WireWarning Detection that alerts you when the scanner is in the vicinity of live AC voltage while you are actively scanning for studs or metal. WireWarning Detection continuously detects hot, unshielded electrical wires up to 2 in. (50 mm) in StudScan, DeepScan, and Metal Scan.
AC Scan, however, is a dedicated scan mode in which the user interface displays bars on the LCD screen that indicate when the scanner is moving towards the source of the voltage or away. Both WireWarning Detection and AC Scan Mode may indicate over a smaller or larger zone around the wire depending on conditions. Both features allow the user to interactively calibrate the sensitivity to AC voltage. If the unit indicates over a large area the user can re-calibrate the unit closer to the source of AC in order to reduce sensitivity so the unit will indicate AC over a smaller zone around the wire.
Question: What can this product do in terms of wire tracing?
Answer: Zircon scanners with AC Scan Mode are not full featured wire tracers. They will however, enable you to map a section of a wall. AC Scan Mode can assist you in locating the route a wire takes through sections of the wall.
Question: Why does the area of voltage appear much larger than an actual wire?
Answer: Static charge may develop on drywall, spreading voltage detection as much as 12 in. (30 cm) laterally from each side of an actual wire. To narrow detection, turn the scanner off and on again at the edge of where the wire was first detected and repeat the scan.
Question: I suspect electrical wires in a certain area when I scan, but why am I not detecting any?
Answer: Wires may be shielded in metal conduit or behind a metallic wall covering. It could also be that the wire is deeper than 2 in. or that the wire may not be live (hot). Try Metal Scan Mode to see if you can find metal, wire, or metal conduit. Always exercise extreme caution when working near electricity.
Question: Does the A250 work on wood paneling and other wood surfaces?
Answer: The A250 is optimized to scan through standard interior sheetrock / drywall (gypsum) construction. This scanner will work on wood, plywood, wood paneling and particle board up to 1.5 in. (38 mm) thick when in DeepScan Mode.
Question: Will the A250 work on textured wall surfaces, acoustic ceilings, or wallpaper?
Answer: Yes, the A250 will work on textured surfaces and dried wallpaper as long as it does not contain any metallic foil or fibers. For highly textured walls or acoustic ceilings, place or tape a thin piece of cardboard onto the surface to be scanned. Recalibrate and scan over the cardboard in DeepScan Mode.
Question: Can I use this scanner to find studs behind carpet?
Answer: No. Zircon scanners are designed for hollow interior walls. They will generally work well to find studs or joists through a plywood subfloor, after the carpeting/flooring has been removed.
Question: Will the A250 work on ceramic tile?
Answer: While the MultiScanner A250 may be able to scan through ceramic tile in DeepScan Mode to locate studs, the many variable layers behind tiled surfaces make it one of the more difficult scanning environments. To find studs through ceramic tile, we suggest using Metal Scan Mode to find the nails or screw heads attaching the backing surface to the studs.
Question: Does this MultiScanner work on lath and plaster?
Answer: Yes. Using Metal Scan Mode, you can identify a stud behind the lath and plaster wall by locating the pattern of nail or screw heads attaching the wood lath to the studs. The nails or screws should be found in a column when scanning for metal. However, if the plaster has metal mesh reinforcement, the MultiScanner A250 will not be able to detect an accurate pattern of nail heads through that material.
Question: What does the Signal Strength Indicator do?
Answer: To help you filter out the target from potential decoys that would give the A250 a false reading, the Signal Strength Indicator gives a reading of the strength, or the certainty, of the returning signal from the wall. Three bars (the highest level) indicates an obvious result behind a normal wall, while two bars (or below) indicates that while the device has found something, it may either be a smaller object than your target, or the target is behind an extra thick wall. Since every wall is built differently, and since any wall can have pipes, wires, or other objects behind it that can return a result, you can use the Signal Strength Indicator to 'map out' your wall to determine the target from the other objects.
Question: Can I use this scanner to scan the outside wall of my house?
Answer: No. Zircon MultiScanners are designed and recommended for interior use only.
Question: I'm planning to mount my new flat screen TV to the wall. Will this scanner help me?
Answer: Yes. The A250 is ideal for basic home or office projects. The center-finding technology allows you to easily find and mark the center of the stud for secure mounting of TV's and AV equipment, closet or garage shelving, heavy mirrors, light fixtures, coat racks and more.
Question: Is the scanner waterproof?
Answer: No. The MultiScanner A250 is splash and water resistant, but not waterproof.
Question: What is the difference between magnetic and electronic stud finders?
Answer: Magnetic stud finders are simply magnets that look for anything magnetic behind a wall. Typically, they are advertised to find screws or nails that hold the wall surface to the studs. However, nails often times are not placed in the center of studs, making it difficult to determine where the stud's center is or how wide the stud is.
Electronic stud finders, such as the A250, on the other hand, operate by detecting density changes behind a surface (like a wall) and will clearly and precisely indicate the edges and center of a stud. The center of a stud is the most secure location when mounting anything heavy. For applications like mapping out floor joists, electronic stud finders have an advantage over magnets because they are not attracted to nails holding floor boards to a subfloor, as well as nails in joists.
Question: Does the MultiScanner A250 come with a warranty?
Answer: The MultiScanner A250 includes limited one year warranty when fulfilled by and shipped from Amazon.
Question: Where can I get help using my MultiScanner A250?
Answer: Zircon's team of Tool Pro Experts provide superior customer service. They know the ins and outs about tools, construction, and the challenges that DIYers and professionals face. Rest assured, at Zircon you can reach live, knowledgeable, honest people who want to work with you.
Zircon also provides support via an online 24/7 interactive support center, step-by-step instructions, how-to videos, and online engagement. Visit Zircon's website today.
- PERFECT FIT: We've specifically designed the case to fit your Walabot DIY, Stud Finder In-Wall Imager. OUTER DIMENSIONS: 7.2" L – 4.32" W – 1.9" H.
- 100% SAFE: Hard quality EVA material is Semi-waterproof, Shockproof and Durable to protect your Scanner from impacts and splashes.
- TRAVEL PARTNER: This hard case for Scanner is lightweight and compact to fit in your backpack, carry-on or luggage for improved traveling protection.
- CONVENIENT DESIGN: Steady detachable hand strap for portability, Inner Mesh pocket design perfectly for accessories, Smooth but strong 360 degree zipper for easy Opening and Closing.
- ON SALE: One case ( The Scanner is not included ) Backed by 100% Money back Guarantee if there is quality problems, Risk-free buy.
Product features
You deserve to own this case
Scanner cannot fit the case perfectly
Very flimsy and not well made
The handle ripped in a short time
Zipper is stuck all the time and easy to break
Unacceptable peculiar smell
Advantages of Choosing LTGEM Case:
✔Durable Exterior and Soft Interior
✔Sturdy Hand Strap makes transportation easy
✔Smooth but Strong Zipper ensures better using experience
Product description
The MultiScanner A200 is Zircon’s newest electronic stud finder and metal detector that is sold exclusively on Amazon. The A200 is designed with a smooth, ergonomic rubber grip allowing for a comfortable yet secure hold for any size hand, at any angle. This multifunctional surface scanner uses the most recent technology in density detecting software and circuitry. The Zircon A200 has a 3-mode selector switch making it easy to change functions while the ultra-bright LCD screen, patented SpotLite Pointing System, and audio tone all indicate the location of the target. This Zircon scanner also comes equipped with a Signal Strength Indicator that helps to distinguish between shallow and deep targets. The MultiScanner A200 includes a backlit display for hard to see places and ACT (Auto Correcting Technology) that automatically corrects common user errors, such as when scanning begins over a stud, in addition to a Low Battery Indicator to alert its users to replace its battery for optimal performance results. The tool constantly scans its surroundings and recalibrates itself if necessary. The scanner has 2 stud scanning modes to locate the center, edges, and direction of wood and metal studs and joists behind walls, floors, and in ceilings. In StudScan Mode, the MS A200 scans up to 0.75 of an inch (19 mm) deep. Switch over to DeepScan Mode to double the scanning depth to 1.5 inches (38 mm). Metal Scan Mode locates non-ferrous metal, such as copper pipes, up to 1.5 inches (38 mm) deep and ferrous metal, such as rebar, up to 3 inches (75 mm) deep. Metal Scan Mode finds studs behind lath and plaster walls, tile, drywall and stucco walls by identifying the consistent pattern of screw or nail heads in the studs. The A200 is programmed with a Wire Warning Detection feature that indicates the presence of live, unshielded electrical wires up to 2 inches (50 mm) deep when scanning in all modes. With the Zircon MultiScanner A200, you can safely maneuver through the most complicated of projects with the professional confidence that comes from owning a Zircon.
- The Zircon MS A200 is an electronic edge and center stud finder and ferrous and non-ferrous metal Detector sold exclusively on Amazon Wire warning detection indicates the presence of live, unshielded electrical AC wiring while scanning in all scanning modes
- Act (auto correcting technology) automatically corrects common user errors, I.E. When scanning begins over a stud, as the signal strength indicator help distinguish shallower targets from deeper ones
- Ergonomically designed grip allows a comfortable hold on the tool for any size hand, at any angle while the patented spotlite pointing system clearly indicates the target location
- One fully charged 9V battery, not included, is required for the stud scanner to run at optimal performance to help you easily find studs and metal while avoiding electrical hazards
User questions & answers
Question: | Does this work to detect studs in walls with spray foam insulation |
Answer: | Hi. Zircon stud finders and multiscanners are optimized for standard interior drywall construction. Other interior surfaces can be penetrated with our scanners, but brick, slate, and rock type material are too dense. Thanks. |
Question: | How is "wirewarning detection" different than "ac scan mode"? both say they find, "live, unshielded electrical ac wires up to 2 inches (50 cm) deep |
Answer: | Hi. The packaging you received your A250 in is called "FFP". That stands for frustration free packaging. The other type would be the standard plastic "clamshell". Most folks prefer the FFP. I believe you can purchase the stud finder products either way from Amazon. Thanks. |
Question: | does this stud finder come packaged, mine did not is that normal |
Answer: | Hello Chris. Due to the variables in building techniques, materials and densities in exterior construction Zircon stud sensors are recommended for interior use only. Our stud sensors locate studs by finding changes in density and the density of the material you mention would not allow the A250 to calibrate properly and as such would prevent it from scanning for the studs. Thank you. |
Question: | Will it work with brick walls |
Answer: | Hello. The stud finder A250 does not come with a case. Thank you. |
Product features
Zircon MultiScanner A200
The MS A200 is a handheld tool dedicated to quickly and efficiently find studs, detect metal and alert you of live AC wiring. The A200 comes equipped with 3 scanning modes: StudScan, DeepScan and Metal Scan.
3 Mode Multifunctional Wall Scanner with Backlit Display
The Zircon MultiScanner A200 makes scanning easy with its newly designed ergonomic grip. The scanner's StudScan finds shallower wood or metal studs up to 0.75 in. (19 mm) deep while DeepScan doubles the scanning depth to 1.5 in. (38 mm).
Metal Scan locates both non-ferrous (non-magnetic) metal, such as copper pipe, and ferrous (magnetic) metal, such as rebar. The A200 is able to detect non-ferrous metal up to 1.5 in. (38 mm) deep, and ferrous metal up to 3 in. (75 mm) deep.
The A200 also includes WireWarning Detection that automatically operates in StudScan, DeepScan and Metal Scan Modes. This safety feature alerts you to the presence of live, unshielded electrical AC wires while scanning for studs and metal.
Before use, always be sure to install a brand new 9V alkaline battery. Zircon stud finders, particularly those with LCD screens, require and consume a great deal of current from batteries. For optimal performance, brand-new, recently purchased alkaline batteries with an extended expiration date, are strongly recommended for use in these tools.
StudScan and DeepScan
Use StudScan Mode to find the center, edges, and direction of wood or metal studs up to 0.75 in. (19 mm) deep.
For best results, always start in StudScan Mode when looking for studs.
If StudScan Mode provides irregular readings, or the Signal Strength Indicator is weak, the studs might be behind deeper than 0.75 in. (19 mm). Slide the Mode Selector Switch to DeepScan Mode. This doubles the scanning depth to 1.5 in. (38 mm) deep and allows for increased accuracy on deeper targets.
Before scanning, hold the A200 flat against wall and press the Power Button to calibrate. Be sure not to move the scanner while calibrating. After a short beep sounds confirming calibration is complete, continue pressing the Power Button and slide the scanner slowly against the surface.
When the A200 finds the edges and center of a stud, 'Edge' and 'Center' displays respectively, indicating you have found your target. When the stud's center is located, the SpotLite Pointer also illuminates and a short beep sounds.
The center of the stud is the stud's most secure location. It is critical to drill in the center of a stud when mounting heavy objects.
Note: WireWarning Detection works in both StudScan and DeepScan Modes. The WireWarning Detection Icon will appear when live, unshielded wires are detected.
Metal Scan
Detect Both Ferrous and Non-Ferrous Metal.
Use Metal Scan Mode to locate and avoid hazards, such as pipes, behind walls and determine if a stud is wood or metal.
Metal Scan Mode detects non-ferrous metal, such as copper pipe, up to 1.5 in. (38 mm) deep, and ferrous metal, such as rebar, up to 3 in. (75 mm) deep.
To use, be sure to first calibrate the A200. For maximum sensitivity, press and hold the Power Button while holding the scanner away from the surface. Once a short beep sounds confirming calibration is complete, place against the surface to be scanned. Be sure to continue to hold the Power Button.
Just like in AC Scan Mode, slowly slide the scanner across the surface and mark the spot where the most display bars peak. Continue scanning until the bars reduce and reverse the direction.
The midpoint between the two marks is the location of the metal target.
Note: WireWarning Detection works in Metal Scan Mode. The WireWarning Detection Icon will appear when live, unshielded wires are detected.
WireWarning Detection
Be Alerted of Live Electrical Wiring in all Modes.
WireWarning Detection is a feature that is always on while scanning in StudScan, DeepScan, and Metal Scan Modes.
It alerts you to the presence of live, unshielded electrical AC wires up to 2 inches (50 cm) deep.
As you approach an area with live AC voltage, a lightning bolt icon will display on the LCD screen. This the WireWarning Detection Icon. If your scan directly starts over an area with live AC voltage, the WireWarning Detection Icon will flash.
Note: Please turn off the electricity and use extreme caution in areas where live AC voltage is detected before nailing or drilling.
Auto Correcting Technology (ACT)
Automatically Have Common Errors Corrected.
This feature enables the scanner to automatically adjust for common calibration errors. It checks calibration 10 times per second and automatically recalibrates when/if needed. If scanning begins directly over a stud, the tool will transparently recalibrate, so you don't have to, and will find that stud when you scan back over it.
This recalibration is usually transparent and no indication is made. If an arrow icon illuminates, the scanner was calibrated near or over a stud and then moved away. The arrow indicates the direction of the missed stud.
Frequently Asked Questions
Question: Does the MultiScanner A200 include a battery?
Answer: No. Zircon stud finders and detectors, particularly those with LCD screens, require and consume a great deal of current from batteries. For optimal performance, a brand-new, recently purchased 9V alkaline battery with an extended expiration date, is not included but is required to properly power the A200.
Question: I inserted a 9V battery, but the scanner doesn't turn on or is giving me strange readings. Is my scanner broken?
Answer: Please be sure to use a fresh, brand new 9V alkaline battery with an extended expiration date. Batteries that may work in a smoke detector or remote control may not have adequate voltage to power the sensing technology in MultiScanners.
Question: Does this scanner need to be calibrated?
Answer: Yes, as with all Zircon scanners, the MultiScanner A200 needs to calibrate to the surface before scanning. Calibrating the scanner on an empty wall gives the device a chance to measure the wall thickness and material density, as well as register factors like humidity, temperature, and even the minor electric readings from your hand, which all have an impact on the readings from the wall. Calibrating is easy and just takes a second. To calibrate, simply place the unit flat against the surface to be scanned and press the Power Button. When powering the A200 on, all the icons on the screen and the SpotLite Pointing System will briefly flash and the scanner will beep. After this occurs, the screen will then clear and, depending on the selected mode, the words 'StudScan', 'DeepScan' or 'Metal' will remain, indicating that calibration has occurred and the scanner is ready to begin scanning. It is important not to move the scanner or begin scanning until the calibration process has taken place for the most accurate results.
Question: What does 'Center Finding' mean?
Answer: Center Finding stud finders locate both the edges and the center of wood and metal studs and joists in one step. 'Edge Finding' stud finders, on the other hand, only find the edges of studs, so you must determine the center. Finding the center of the stud to mount heavy objects is critical as the stud's center is the most secure location of the stud.
Question: What is DeepScan Mode?
Answer: Unlike StudScan Mode, which scans through one layer of drywall up to 0.75 in. thick (19 mm), DeepScan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. DeepScan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. Extra layers in a wall can make it difficult to find studs in regular StudScan Mode. To minimize false positives and/or finding other objects further behind the wall that may not be a stud, always start your scan in StudScan Mode first.
Question: How can I be certain the objects found behind my wall are studs in DeepScan Mode?
Answer: DeepScan Mode has increased sensitivity so you may have located something other than a stud. Studs are equally spaced to either side (12, 16, or 24 in. apart) and typically run from floor to ceiling. To better confirm that what you found is a stud, check for other studs equally spaced to either side and for the same stud at several heights directly above and below the first stud indication. A stud reading would also measure approximately 1.5 in. (38 mm) apart from each edge. Anything larger or smaller may not be a stud if not near a door or window.
Question: Will this MultiScanner A200 locate metal studs?
Answer: Yes, the A200 will locate metal studs in StudScan, DeepScan, and Metal Scan Modes. Since stud finders are looking for a change in density behind drywall, not a particular material, in StudScan, DeepScan, and Metal Scan Modes, the detector will react to metal studs the same as it would for wooden studs. The A200 will locate wood and metal studs up to 0.75 in. (19 mm) deep while DeepScan Mode locates targets up to 1.5 in. (38 mm) deep. In Metal Scan Mode, the detector will only detect metal studs, in addition to any other metal, within its specified scan depth and range.
Question: Why does the scanner beep and the lights flash when scanning for a stud?
Answer: The scanner could've been calibrated over a stud, calibrated on a dense part of the wall, or the back of the unit may have slightly lifted or tilted during the scan. Move the MultiScanner A200 over a couple of inches to the left or right, re-calibrate, and start your scan again.
Question: What is WireWarning Detection?
Answer: WireWarning Detection is a feature that is always on while you are scanning in StudScan, DeepScan, and Metal Scan Modes to alert you to the presence of live, unshielded electrical AC wires up to 2 in. (50 mm) deep. As you approach an area with live AC voltage, a lightning bolt icon will display on the LCD screen. This is the WireWarning Detection Icon. If your scan directly starts over an area with live AC voltage, this icon will flash. Please turn off the electricity and use extreme caution in areas where live ac voltage is detected before nailing or drilling.
Question: Why does the area of voltage appear much larger than an actual wire?
Answer: Static charge may develop on drywall, spreading voltage detection as much as 12 in. (30 cm) laterally from each side of an actual wire. To narrow detection, turn the scanner off and on again at the edge of where the wire was first detected and repeat the scan.
Question: I suspect electrical wires in a certain area when I scan, but why am I not detecting any?
Answer: Wires may be shielded in metal conduit or behind a metallic wall covering. It could also be that the wire is deeper than 2 in. or that the wire may not be live (hot). Try Metal Scan Mode to see if you can find metal, wire, or metal conduit. Always exercise extreme caution when working near electricity.
Question: Does the A200 work on wood paneling and other wood surfaces?
Answer: The A200 is optimized to scan through standard interior sheetrock / drywall (gypsum) construction. This scanner will work on wood, plywood, wood paneling and particle board up to 1.5 in. (38 mm) thick when in DeepScan Mode.
Question: Will the A200 work on textured wall surfaces, acoustic ceilings, or wallpaper?
Answer: Yes, the A200 will work on textured surfaces and dried wallpaper as long as it does not contain any metallic foil or fibers. For highly textured walls or acoustic ceilings, place or tape a thin piece of cardboard onto the surface to be scanned. Recalibrate and scan over the cardboard in DeepScan Mode.
Question: Can I use this scanner to find studs behind carpet?
Answer: No. Zircon scanners are designed for hollow interior walls. They will generally work well to find studs or joists through a plywood subfloor, after the carpeting/flooring has been removed.
Question: Will the A200 work on ceramic tile?
Answer: While the MultiScanner A200 may be able to scan through ceramic tile in DeepScan mode to locate studs, the many variable layers behind tiled surfaces make it one of the more difficult scanning environments. To find studs through ceramic tile, we suggest using Metal Scan Mode to find the nails or screw heads attaching the backing surface to the studs.
Question: Does this MultiScanner work on lath and plaster?
Answer: Yes. Using Metal Scan Mode, you can identify a stud behind the lath and plaster wall by locating the pattern of nail or screw heads attaching the wood lath to the studs. The nails or screws should be found in a column when scanning for metal. However, if the plaster has metal mesh reinforcement, the MultiScanner A200 will not be able to detect an accurate pattern of nail heads through that material.
Question: What does the Signal Strength Indicator do?
Answer: To help you filter out the target from potential decoys that would give the A200 a false reading, the Signal Strength Indicator gives a reading of the strength, or the certainty, of the returning signal from the wall. Three bars (the highest level) indicates an obvious result behind a normal wall, while two bars (or below) indicates that while the device has found something, it may either be a smaller object than your target, or the target is behind an extra thick wall. Since every wall is built differently, and since any wall can have pipes, wires, or other objects behind it that can return a result, you can use the Signal Strength Indicator to 'map out' your wall to determine the target from the other objects.
Question: Can I use this scanner to scan the outside wall of my house?
Answer: No. Zircon MultiScanners are designed and recommended for interior use only.
Question: I'm planning to mount my new flat screen TV to the wall. Will this scanner help me?
Answer: Yes. The A200 is ideal for basic home or office projects. The center-finding technology allows you to easily find and mark the center of the stud for secure mounting of TV's and AV equipment, closet or garage shelving, heavy mirrors, light fixtures, coat racks and more.
Question: Is the scanner waterproof?
Answer: No. The MultiScanner A200 is splash and water resistant, but not waterproof.
Question: What is the difference between magnetic and electronic stud finders?
Answer: Magnetic stud finders are simply magnets that look for anything magnetic behind a wall. Typically, they are advertised to find screws or nails that hold the wall surface to the studs. However, nails often times are not placed in the center of studs, making it difficult to determine where the stud's center is or how wide the stud is.
Electronic stud finders, such as the A200, on the other hand, operate by detecting density changes behind a surface (like a wall) and will clearly and precisely indicate the edges and center of a stud. The center of a stud is the most secure location when mounting anything heavy. For applications like mapping out floor joists, electronic stud finders have an advantage over magnets because they are not attracted to nails holding floor boards to a subfloor, as well as nails in joists.
Question: Does the MultiScanner A200 come with a warranty?
Answer: The MultiScanner A200 includes limited one year warranty when fulfilled by and shipped from Amazon.
Question: Where can I get help using my MultiScanner A200?
Answer: Zircon's team of Tool Pro Experts provide superior customer service. They know the ins and outs about tools, construction, and the challenges that DIYers and professionals face. Rest assured, at Zircon you can reach live, knowledgeable, honest people who want to work with you.
Zircon also provides support via an online 24/7 interactive support center, step-by-step instructions, how-to videos, and online engagement. Visit Zircon's website today.
Product description
The StudSensor A100 is Zircon’s newest edge locating electronic stud finder that is sold exclusively on Amazon. The A100 is designed with a smooth, ergonomic rubber grip allowing for a comfortable yet secure hold for any size hand, at any angle. This stud finder uses the most recent technology in density detecting software and circuitry. The scanner has 2 scanning modes to locate the edges of wood and metal studs and joists behind walls, floors, and in ceilings up to 1.5 inches (38 mm) deep. In StudScan Mode, the SS A100 locates the edges of shallower wood or metal studs up to 0.75 of an inch (19 mm) deep. Switch over to DeepScan Mode to double the scanning depth to 1.5 inches (38 mm). This stud sensor is programmed with a Wire Warning Detection feature that indicates the presence of live unshielded electrical wires up to 2 inches (50 mm) deep when using either stud scanning modes. Finding studs using this edge finding tool is simple. To get started, install one brand new 9V alkaline battery (not included). Place the unit flat against the wall and press the Power Button to calibrate the sensor. Once you hear a beep indicating calibration is complete, continue to hold the Power Button and slowly slide the tool across the surface. The easy-to-read LCD will alert you as the stud detector approaches the edge of the stud in both scanning modes. Once the edge is detected, the patented arrow-shaped SpotLite Pointer will shine, the translucent base will illuminate, and an audio tone will sound. DO NOT DRILL HERE! Instead, mark the spot in the “V’ marker groove at the head of the tool and continue past the stud. Repeat the process in the opposite direction and mark the opposite edge of the stud. The center of the stud is midway between the two marks. Make sure to note whether the Wire Warning Detection is alerting you to live, unshielded AC wiring before drilling between the two marks into the center of the stud. With the Zircon StudSensor A100, you can safely maneuver through the most complicated of projects with the professional confidence that comes from owning a Zircon.
- The Zircon SS A100 electronic stud scanner is sold exclusively on Amazon and detects the edges of wood and metal studs up to 1.5 inches (38 mm) deep
- Wire Warning Detection indicates the presence of live, unshielded electrical AC wiring while scanning in StudScan and DeepScan modes
- Patented "over the stud" indicator and spotlite pointing system ensure the A100 provides trustworthy results
- Ergonomically designed grip allows a comfortable hold on the tool for any size hand, at any angle
- One fully charged 9V battery, not included, is required for the stud scanner to run at optimal performance to help you easily find studs and avoid hazards
User questions & answers
Question: | Does it detect ceiling joist |
Answer: | Hello Donna. Yes, the A100 will locate ceiling joist. Thank you. |
Question: | What is the difference between e50 and A100? And which is better? Thanks |
Answer: | All i know is that e50 did not work for me. I tired both settings and gave me fake results. Directions are simple. Did not work. I drilled into space. |
Question: | Would this work on bathroom/shower tiles? Trying to install grab bars in the shower area |
Answer: | Hello Ashley. No, while the A100 can scan through tile sometimes the layers behind the tile, the hardi-backer board and glue, can be problematic. We recommend using the A200 on bathroom tiles. The A200 has an additional metal scan feature on it, if you are not able to get a consistent reading using the Studscan or Deepscan mode you can use the metal scan feature on this tool to find the nails holding the wall boards in the studs. Thank you. |
Question: | will this signal if there is a stash in the wall also, just like studs |
Answer: | haven't come across one in my walls yet. |
Product features
Zircon StudSensor A100
The SS A100 is a handheld tool dedicated to quickly and efficiently find the edges of studs and alert you of live AC wiring. The A100 comes equipped with 2 scanning modes: StudScan and DeepScan.
Locate Studs and Scan for Live AC Wiring Safely and Efficiently
The Zircon StudSensor A100 makes scanning easy with its newly designed ergonomic grip. The tool's StudScan finds shallower wood or metal studs up to 0.75 in. (19 mm) deep. Slide the Mode Selector Switch to DeepScan Mode. This doubles the scanning depth to 1.5 in. (38 mm) deep and allows for increased accuracy on deeper targets.
The A100 also includes WireWarning Detection that automatically operates in StudScan and DeepScan Modes. This safety feature alerts you to the presence of live, unshielded electrical AC wires while scanning for studs.
Before use, always be sure to install a brand new 9V alkaline battery. Zircon stud finders, particularly those with screens, require and consume a great deal of current from batteries. For optimal performance, brand-new, recently purchased alkaline batteries with an extended expiration date, are strongly recommended for use in these tools.
Edge Finding
Before scanning, hold the A100 flat against wall and press the Power Button to calibrate. Be sure not to move the scanner while calibrating. After a short beep sounds, confirming calibration is complete, continue pressing the Power Button and slide the scanner slowly against the surface.
Be sure not to drill at the edge of the stud. Continue to scan the surface until the stud's center is detected.
The easy-to-read screen will alert you as the stud detector approaches the edge of the stud in both scanning modes. Once the edge is detected, the patented arrow-shaped SpotLite Pointer will shine, the translucent base will illuminate, and an audio tone will sound. DO NOT DRILL HERE! Instead, mark the spot in the “V’ marker groove at the head of the tool and continue past the stud. Repeat the process in the opposite direction and mark the opposite edge of the stud. The center of the stud is midway between the two marks.
The center of the stud center is the stud's most secure location. It is critical to drill in the center when mounting heavy objects.
StudScan and DeepScan Modes
Use StudScan Mode to find the edges of wood or metal studs up to 0.75 in. (19 mm) deep.
For best results, always start in StudScan Mode when looking for studs.
If StudScan Mode provides irregular readings the studs might be behind deeper than 0.75 in. (19 mm). Slide the Mode Selector Switch to DeepScan Mode. This doubles the scanning depth to 1.5 in. (38 mm) deep and allows for increased accuracy on deeper targets.
Note: WireWarning Detection works in both StudScan and DeepScan Modes. The WireWarning Detection Icon will flash when live, unshielded wires are detected.
WireWarning Detection
Safely Scan in both Modes
WireWarning Detection is a feature that is always on while scanning in StudScan and DeepScan Modes.
It alerts you to the presence of live, unshielded, electrical AC wires up to 2 inches (50 cm) deep.
As you approach an area with live AC voltage, a lightning bolt icon will display on the screen. This the WireWarning Detection Icon. If your scan directly starts over an area with live AC voltage, the WireWarning Detection Icon will flash.
Note: Please turn off the electricity and use extreme caution in areas where live AC voltage is detected before nailing or drilling.
Frequently Asked Questions
Question: Does the StudSensor A100 include a battery?
Answer: No. Zircon stud finders and detectors, particularly those with screens, require and consume a great deal of current from batteries. For optimal performance, a brand-new, recently purchased 9V alkaline battery with an extended expiration date, is not included but is required to properly power the A100.
Question: I inserted a 9V battery, but the tool doesn't turn on or is giving me strange readings. Is my tool broken?
Answer: Please be sure to use a fresh, brand new 9V alkaline battery with an extended expiration date. Batteries that may work in a smoke detector or remote control may not have adequate voltage to power the sensing technology in StudSensors.
Question: Does this tool need to be calibrated?
Answer: Yes, as with all Zircon tools, the StudSensor A100 needs to calibrate to the surface before scanning. Calibrating the tool on an empty wall gives the device a chance to measure the wall thickness and material density, as well as register factors like humidity, temperature, and even the minor electric readings from your hand, which all have an impact on the readings from the wall. Calibrating is easy and just takes a second. To calibrate, simply place the unit flat against the surface to be scanned and press the Power Button. When powering the A100 on, all the icons on the screen and the SpotLite Pointing System will briefly flash and the tool will beep. After this occurs, the screen will then clear and, depending on the selected mode, the words "StudScan" or "DeepScan" will remain, indicating that calibration has occurred and the tool is ready to begin scanning. It is important not to move the tool or begin scanning until the calibration process has taken place for the most accurate results.
Question: What is DeepScan Mode?
Answer: Unlike StudScan Mode, which scans through one layer of drywall up to 0.75 in. thick (19 mm), DeepScan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. DeepScan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. Extra layers in a wall can make it difficult to find studs in regular StudScan Mode. To minimize false positives and/or finding other objects further behind the wall that may not be a stud, always start your scan in StudScan Mode first.
Question: How can I be certain the objects found behind my wall are studs in DeepScan Mode?
Answer: DeepScan Mode has increased sensitivity so you may have located something other than a stud. Studs are equally spaced to either side (12, 16, or 24 in. apart) and typically run from floor to ceiling. To better confirm that what you found is a stud, check for other studs equally spaced to either side and for the same stud at several heights directly above and below the first stud indication. A stud reading would also measure approximately 1.5 in. (38 mm) apart from each edge. Anything larger or smaller may not be a stud if not near a door or window.
Question: Will this StudSensor A100 locate metal studs?
Answer: Yes, the A100 will locate metal studs in StudScan, DeepScan, and Metal Scan Modes. Since stud finders are looking for a change in density behind drywall, not a particular material, in StudScan and DeepScan Modes the detector will react to metal studs the same as it would for wooden studs. The A100 will locate wood and metal studs up to 0.75 in. (19 mm) deep while DeepScan Mode locates targets up to 1.5 in. (38 mm) deep.
Question: Why does the tool beep and the lights flash when scanning for a stud?
Answer: The tool could've been calibrated over a stud, calibrated on a dense part of the wall, or the back of the unit may have slightly lifted or tilted during the scan. Move the StudSensor A100 over a couple of inches to the left or right, re-calibrate, and start your scan again.
Question: What is WireWarning Detection?
Answer: WireWarning Detection is a feature that is always on while you are scanning in StudScan and DeepScan Modes to alert you to the presence of live, unshielded electrical AC wires up to 2 in. (50 mm) deep. As you approach an area with live AC voltage, a lightning bolt icon will display on the screen. This is the WireWarning Detection Icon. If your scan directly starts over an area with live AC voltage, this icon will flash. PLEASE TURN OFF THE ELECTRICITY AND USE EXTREME CAUTION IN AREAS WHERE LIVE AC VOLTAGE IS DETECTED BEFORE NAILING OR DRILLING.
Question: Why does the area of voltage appear much larger than an actual wire?
Answer: Static charge may develop on drywall, spreading voltage detection as much as 12 in. (30 cm) laterally from each side of an actual wire. To narrow detection, turn the tool off and on again at the edge of where the wire was first detected and repeat the scan.
Question: I suspect electrical wires in a certain area when I scan, but why am I not detecting any?
Answer: Wires may be shielded in metal conduit or behind a metallic wall covering. It could also be that the wire is deeper than 2 in. (50 mm) or that the wire may not be live (hot). Always exercise extreme caution when working near electricity.
Question: Does the A100 work on wood paneling and other wood surfaces?
Answer: The A100 is optimized to scan through standard interior sheetrock / drywall (gypsum) construction. This tool will work on wood, plywood, wood paneling and particle board up to 1.5 in. (38 mm) thick when in DeepScan Mode.
Question: Will the A100 work on textured wall surfaces, acoustic ceilings, or wall paper?
Answer: Yes, the A100 will work on textured surfaces and dried wall paper as long as it does not contain any metallic foil or fibers. For highly textured walls or acoustic ceilings, place or tape a thin piece of cardboard onto the surface to be scanned. Recalibrate and scan over the cardboard in DeepScan Mode.
Question: Can I use this tool to find studs behind carpet?
Answer: No. Zircon tools are designed for hollow interior walls. They will generally work well to find studs or joists through a plywood subfloor, after the carpeting/flooring has been removed.
Question: Will the A100 work on ceramic tile?
Answer: While the StudSensor A100 may be able to scan through ceramic tile in DeepScan mode to locate studs, the many variable layers behind tiled surfaces make it one of the more difficult scanning environments.
Question: Does this StudSensor work on lath and plaster?
Answer: No. Due to irregularities in plaster thickness, this tool is not recommended for use on lath and plaster.
Question: Can I use this tool to scan the outside wall of my house?
Answer: No. Zircon StudSensors are designed and recommended for interior use only.
Question: I'm planning to mount my new flat screen TV to the wall. Will this tool help me?
Answer: Yes. The A100 is ideal for basic home or office projects. The center-finding technology allows you to easily find and mark the center of the stud for secure mounting of TV's and AV equipment, closet or garage shelving, heavy mirrors, light fixtures, coat racks and more.
Question: Is the tool waterproof?
Answer: No. The StudSensor A100 is splash and water resistant, but not waterproof.
Question: What is the difference between magnetic and electronic stud finders?
Answer: Magnetic stud finders are simply magnets that look for anything magnetic behind a wall. Typically, they are advertised to find screws or nails that hold the wall surface to the studs. However, nails often times are not placed in the center of studs, making it difficult to determine where the stud's center is or how wide the stud is.
Electronic stud finders, such as the A100, on the other hand, operate by detecting density changes behind a surface (like a wall) and will clearly and precisely indicate the edges and center of a stud. The center of a stud is the most secure location when mounting anything heavy. For applications like mapping out floor joists, electronic stud finders have an advantage over magnets because they are not attracted to nails holding floor boards to a subfloor, as well as nails in joists.
Question: Does the StudSensor A100 come with a warranty?
Answer: The StudSensor A100 includes limited one year warranty when fulfilled by and shipped from Amazon.
Question: Where can I get help using my StudSensor A100?
Answer: Zircon's team of Tool Pro Experts provide superior customer service. They know the ins and outs about tools, construction, and the challenges that DIYers and professionals face. Rest assured, at Zircon you can reach live, knowledgeable, honest people who want to work with you. Call the toll free Customer Support Number 1-800-245-9265 Monday - Friday, 8 AM - 5 PM PST to speak with an expert today.
Zircon also provides support via an online 24/7 interactive support center, step-by-step instructions, how-to videos, and online engagement. Visit Zircon's website today.
Product description
The StudSensor A150 is Zircon’s newest center locating electronic stud finder that is sold exclusively on Amazon. The A150 is designed with a smooth, ergonomic rubber grip allowing for a comfortable yet secure hold for any size hand, at any angle. This stud finder uses the most recent technology in density detecting software and circuitry. The scanner has 2 scanning modes to locate the center and edges of wood and metal studs and joists behind walls, floors, and in ceilings up to 1.5 inches (38 mm) deep. In StudScan Mode, the SS A150 locates the center and edges of shallower wood or metal studs up to 0.75 of an inch (19 mm) deep. Switch over to DeepScan Mode to double the scanning depth to 1.5 inches (38 mm). This stud sensor is programmed with a Wire Warning Detection feature that indicates the presence of live unshielded electrical wires up to 2 inches (50 mm) deep when using either stud scanning modes. Finding studs using this center and edge finding tool is simple. To get started, install one brand new 9V alkaline battery (not included). Place the unit flat against the wall and press the Power Button to calibrate the sensor. Once you hear a beep indicating calibration is complete, continue to hold the Power Button and slowly slide the tool across the surface. The Signal Strength Bars will appear on the LCD screen when a stud is detected. As the stud finder detects the edge of a stud, “EDGE” will appear in the LCD screen. Continue to slide the tool along the wall until you hear an audio tone and see both the patented arrow-shaped SpotLite Pointer as well as “CENTER” on the LCD. These signs indicate the center of the stud has been found. Make sure to note whether the Wire Warning Detection is alerting you to live, unshielded AC wiring before drilling into the center of the stud. With the Zircon StudSensor A150, you can safely maneuver through the most complicated of projects with the professional confidence that comes from owning a Zircon.
- The Zircon ss A150 electronic stud scanner is sold exclusively on amazon and detects the center and edges of wood and metal studs up to 1.5 inches (38 mm) deep
- Wire Warning Detection indicates the presence of live, unshielded electrical AC wiring while scanning in StudScan and DeepScan modes
- Target indication bars appear when a stud is detected and increase as the target is approached; the patented spotlite pointing system shines and an audio Tone sounds when the stud center is located
- Ergonomically designed grip allows a comfortable hold on the tool for any size hand, at any angle
- One fully charged 9V battery, not included, is required for the stud scanner to run at optimal performance to help you easily find studs and avoid hazards
User questions & answers
Question: | Can this pick up studs behind drywall attached to plywood |
Answer: | whats the accuracy @ 100 feet ? Someone answered .005, that's 5/1000 of an inch @ 300 feet and I know that's not correct. |
Question: | any good cases available for this |
Answer: | std screw on connection, will attach to most tripods, i bought this one DEWALT DW0737 Heavy-Duty Tripod https://www.amazon.com/dp/B000RFRM0O/ref=cm_sw_r_em_apa_i_W82KCbKZB10KS |
Question: | Does it find pvc water pipes |
Answer: | No this is not a re chargeable you buy replacement batteries |
Question: | Is the metal scanning worth the extra money for occasional home use |
Answer: | In the dark yes there is a visible line |
Product features
Zircon StudSensor A150
The SS A150 is a handheld tool dedicated to quickly and efficiently find studs and alert you of live AC wiring. The A150 comes equipped with 2 scanning modes: StudScan and DeepScan.
Locate Studs and Scan for Live AC Wiring Safely and Efficiently
The Zircon StudSensor A150 makes scanning easy with its newly designed ergonomic grip. The tool's StudScan finds shallower wood or metal studs up to 0.75 in. (19 mm) deep. Simply press the Power Button twice to double the scanning depth to 1.5 in. (38 mm) in DeepScan Mode.
The A150 also includes WireWarning Detection that automatically operates in StudScan and DeepScan Modes. This safety feature alerts you to the presence of live, unshielded electrical AC wires while scanning for studs.
Before use, always be sure to install a brand new 9V alkaline battery. Zircon stud finders, particularly those with LCD screens, require and consume a great deal of current from batteries. For optimal performance, brand-new, recently purchased alkaline batteries with an extended expiration date, are strongly recommended for use in these tools.
StudScan and DeepScan
Use StudScan Mode to find the center, edges, and direction of wood or metal studs up to 0.75 in. (19 mm) deep.
For best results, always start in StudScan Mode when looking for studs.
If StudScan Mode provides irregular readings, or the Signal Strength Indicator is weak, the studs might be behind deeper than 0.75 in. (19 mm). Quickly press the Power Button twice and hold it down after the second press to switch to DeepScan Mode. This doubles the scanning depth to 1.5 in. (38 mm) deep and allows for increased accuracy on deeper targets.
Before scanning, hold the A150 flat against wall and press the Power Button to calibrate. Be sure not to move the tool while calibrating. After a short beep sounds confirming calibration is complete, continue pressing the Power Button and slide the tool slowly against the surface.
When the A150 finds the edges and center of a stud, 'Edge' and 'Center' displays respectively, indicating you have found your target. When the stud's center is located, the SpotLite Pointer also illuminates and a short beep sounds.
The center of the stud is the stud's most secure location. It is critical to drill in the center of a stud when mounting heavy objects.
Note: WireWarning Detection works in both StudScan and DeepScan Modes. The WireWarning Detection Icon will flash when live, unshielded wires are detected.
WireWarning Detection
Be Alerted of Electrical Wires in Both Modes.
WireWarning Detection is a feature that is always on while scanning in StudScan and DeepScan Scan Modes.
It alerts you to the presence of live, unshielded, electrical AC wires up to 2 inches (50 cm) deep.
As you approach an area with live AC voltage, a lightning bolt icon will display on the LCD screen. This the WireWarning Detection Icon. If your scan directly starts over an area with live AC voltage, the WireWarning Detection Icon will flash.
Note: Please turn off the electricity and use extreme caution in areas where live AC voltage is detected before nailing or drilling.
Auto Correcting Technology (ACT)
Automatically Have Common Errors Corrected.
This feature enables the tool to automatically adjust for common calibration errors. It checks calibration 10 times per second and automatically recalibrates when/if needed. If scanning begins directly over a stud, the tool will transparently recalibrate, so you don't have to, and will find that stud when you scan back over it.
This recalibration is usually transparent and no indication is made. If an arrow icon illuminates, the tool was calibrated near or over a stud and then moved away. The arrow indicates the direction of the missed stud.
Frequently Asked Questions
Question: Does the StudSensor A150 include a battery?
Answer: No. Zircon stud finders and detectors, particularly those with LCD screens, require and consume a great deal of current from batteries. For optimal performance, a brand-new, recently purchased 9V alkaline battery with an extended expiration date, is not included but is required to properly power the A150.
Question: I inserted a 9V battery, but the tool doesn't turn on or is giving me strange readings. Is my tool broken?
Answer: Please be sure to use a fresh, brand new 9V alkaline battery with an extended expiration date. Batteries that may work in a smoke detector or remote control may not have adequate voltage to power the sensing technology in StudSensors.
Question: Does this tool need to be calibrated?
Answer: Yes, as with all Zircon tools, the StudSensor A150 needs to calibrate to the surface before scanning. Calibrating the tool on an empty wall gives the device a chance to measure the wall thickness and material density, as well as register factors like humidity, temperature, and even the minor electric readings from your hand, which all have an impact on the readings from the wall. Calibrating is easy and just takes a second. To calibrate, simply place the unit flat against the surface to be scanned and press the Power Button. When powering the A150 on, all the icons on the screen and the SpotLite Pointing System will briefly flash and the tool will beep. After this occurs, the screen will then clear and, depending on the selected mode, the words 'StudScan' or 'DeepScan' will remain, indicating that calibration has occurred and the tool is ready to begin scanning. It is important not to move the tool or begin scanning until the calibration process has taken place for the most accurate results.
Question: What does 'Center Finding' mean?
Answer: Center Finding stud finders locate both the edges AND the center of wood and metal studs and joists in one step. 'Edge Finding' stud finders, on the other hand, only find the edges of studs, so you must determine the center. Finding the center of the stud to mount heavy objects is critical as the stud's center is the most secure location of the stud.
Question: What is DeepScan Mode?
Answer: Unlike StudScan Mode, which scans through one layer of drywall up to 0.75 in. thick (19 mm), DeepScan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. DeepScan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. Extra layers in a wall can make it difficult to find studs in regular StudScan Mode. To minimize false positives and/or finding other objects further behind the wall that may not be a stud, always start your scan in StudScan Mode first.
Question: How can I be certain the objects found behind my wall are studs in DeepScan Mode?
Answer: DeepScan Mode has increased sensitivity so you may have located something other than a stud. Studs are equally spaced to either side (12, 16, or 24 in. apart) and typically run from floor to ceiling. To better confirm that what you found is a stud, check for other studs equally spaced to either side and for the same stud at several heights directly above and below the first stud indication. A stud reading would also measure approximately 1.5 in. (38 mm) apart from each edge. Anything larger or smaller may not be a stud if not near a door or window.
Question: Will this StudSensor A150 locate metal studs?
Answer: Yes, the A150 will locate metal studs in StudScan and DeepScan Modes. Since stud finders are looking for a change in density behind drywall, not a particular material, in StudScan and DeepScan Modes the detector will react to metal studs the same as it would for wooden studs. The A150 will locate wood and metal studs up to 0.75 in. (19 mm) deep while DeepScan Mode locates targets up to 1.5 in. (38 mm) deep.
Question: Why does the tool beep and the lights flash when scanning for a stud?
Answer: The tool could've been calibrated over a stud, calibrated on a dense part of the wall, or the back of the unit may have slightly lifted or tilted during the scan. Move the StudSensor A150 over a couple of inches to the left or right, re-calibrate, and start your scan again.
Question: What is WireWarning Detection?
Answer: WireWarning Detection is a feature that is always on while you are scanning in StudScan and DeepScan Modes to alert you to the presence of live, unshielded, electrical AC wires up to 2 in. (50 mm) deep. As you approach an area with live AC voltage, a lightning bolt icon will display on the LCD screen. This is the WireWarning Detection Icon. If your scan directly starts over an area with live AC voltage, this icon will flash. Please turn off the electricity and use extreme caution in areas where live ac voltage is detected before nailing or drilling.
Question: Why does the area of voltage appear much larger than an actual wire?
Answer: Static charge may develop on drywall, spreading voltage detection as much as 12 in. (30 cm) laterally from each side of an actual wire. To narrow detection, turn the tool off and on again at the edge of where the wire was first detected and repeat the scan.
Question: I suspect electrical wires in a certain area when I scan, but why am I not detecting any?
Answer: Wires may be shielded in metal conduit or behind a metallic wall covering. It could also be that the wire is deeper than 2 in. (50 mm) or that the wire may not be live (hot). Always exercise extreme caution when working near electricity.
Question: Does the A150 work on wood paneling and other wood surfaces?
Answer: The A150 is optimized to scan through standard interior sheetrock / drywall (gypsum) construction. This tool will work on wood, plywood, wood paneling and particle board up to 1.5 in. (38 mm) thick when in DeepScan Mode.
Question: Will the A150 work on textured wall surfaces, acoustic ceilings, or wallpaper?
Answer: Yes, the A150 will work on textured surfaces and dried wallpaper as long as it does not contain any metallic foil or fibers. For highly textured walls or acoustic ceilings, place or tape a thin piece of cardboard onto the surface to be scanned. Recalibrate and scan over the cardboard in DeepScan Mode.
Question: Can I use this tool to find studs behind carpet?
Answer: No. Zircon tools are designed for hollow interior walls. They will generally work well to find studs or joists through a plywood subfloor, after the carpeting/flooring has been removed.
Question: Will the A150 work on ceramic tile?
Answer: While the StudSensor A150 may be able to scan through ceramic tile in DeepScan mode to locate studs, the many variable layers behind tiled surfaces make it one of the more difficult scanning environments.
Question: Does this StudSensor work on lath and plaster?
Answer: No. Due to irregularities in plaster thickness, this tool is not recommended for use on lath and plaster.
Question: What does the Signal Strength Indicator do?
Answer: To help you filter out the target from potential decoys that would give the A150 a false reading, the Signal Strength Indicator gives a reading of the strength, or the certainty, of the returning signal from the wall. Three bars (the highest level) indicates an obvious result behind a normal wall, while two bars (or below) indicates that while the device has found something, it may either be a smaller object than your target, or the target is behind an extra thick wall. Since every wall is built differently, and since any wall can have pipes, wires, or other objects behind it that can return a result, you can use the Signal Strength Indicator to 'map out' your wall to determine the target from the other objects.
Question: Can I use this tool to scan the outside wall of my house?
Answer: No. Zircon StudSensors are designed and recommended for interior use only.
Question: I'm planning to mount my new flat screen TV to the wall. Will this tool help me?
Answer: Yes. The A150 is ideal for basic home or office projects. The center-finding technology allows you to easily find and mark the center of the stud for secure mounting of TV's and AV equipment, closet or garage shelving, heavy mirrors, light fixtures, coat racks and more.
Question: Is the tool waterproof?
Answer: No. The StudSensor A150 is splash and water resistant, but not waterproof.
Question: What is the difference between magnetic and electronic stud finders?
Answer: Magnetic stud finders are simply magnets that look for anything magnetic behind a wall. Typically, they are advertised to find screws or nails that hold the wall surface to the studs. However, nails often times are not placed in the center of studs, making it difficult to determine where the stud's center is or how wide the stud is.
Electronic stud finders, such as the A150, on the other hand, operate by detecting density changes behind a surface (like a wall) and will clearly and precisely indicate the edges and center of a stud. The center of a stud is the most secure location when mounting anything heavy. For applications like mapping out floor joists, electronic stud finders have an advantage over magnets because they are not attracted to nails holding floor boards to a subfloor, as well as nails in joists.
Question: Does the StudSensor A150 come with a warranty?
Answer: The StudSensor A150 includes limited one year warranty when fulfilled by and shipped from Amazon.
Question: Where can I get help using my StudSensor A150?
Answer: Zircon's team of Tool Pro Experts provide superior customer service. They know the ins and outs about tools, construction, and the challenges that DIYers and professionals face. Rest assured, at Zircon you can reach live, knowledgeable, honest people who want to work with you.
Zircon also provides support via an online 24/7 interactive support center, step-by-step instructions, how-to videos, and online engagement. Visit Zircon's website today.
- CMS Magnetics Advantage: Join the 10 millions+ Loyal Customers Across the World for High Quality Industrial Grade Magnets. CMS Magnetics Product Quality is Strictly Controlled by ISO 9001 Systems and All of Our Magnets are Inspected Individually to Ensure You Get The Top Quality Magnets Available For Sale In The US Today
- Ridiculous Strong and Very Useful: Each Piece of These Magnets Provides 124 LB Holding Power as a Direct Touch and Direct Pull with just 1” Size. They are Great for Holding, Retrieving and Detecting, Such as Stud Finders, Fishing Magnets, Magnetic Tool Holders. Also They are Great Gifts and Have Lots of Industrial Applications like Magnetic Separation
- Best Coating Available: Our Nickel + Copper + Nickel Triple Layer Coating Provides a Shinning and Corrosion Resistance Protection for the Magnets for Years to Come
- All Season Magnets: These Magnets are Warranted for Their Strength for Their Life Time no Matter What Seasons, Cold or Hot
- What You Get: 2 Pieces of 1” Cube Magnets Packed Individually in Two Tine Boxes for Added Safety. Since the Closed Tin Box Reduces the Magnetic Field so It Become Much Safer to Carry and Handle Them
User questions & answers
Question: | How many cubes will I get on 1 purchase |
Answer: | It is not compatible with the iPhone. |
Question: | Are these still packaged as shown. in the tin box with plastic insert |
Answer: | It works with phones using the android operating system. |
Question: | Why it says 2 pack when you ship |
Answer: | Yes it will |
Question: | If two identical magnets are joined, the force is doubled |
Answer: | Yes and extra gel pads to attach device to phone. I don't remember quantities. |
Product features
Cube Magnets N52 1" x 1" x 1" 14,400 Gauss & 124 Lbs Pull Force 2 Pieces and Packed in Two Bonus Individual Tin Boxes
The Right Magnets For Your Project Every Time
CMS Magnetics is an established supplier of premium quality magnets that are used in some of the most demanding and critical applications such as aviation, automation, and manufacturing systems that help shape the world around you. Because we strive to only supply the highest quality magnets, our magnets are all produced in state of the art facilities that ensure a high standard of both quality and performance are met.
Besides neodymium magnets which are renowned for their strength and versatility, we also carry many different kinds of magnets that are all suited for different needs. From ultra high temperature resistant Samarium-Cobalt magnets to cost-effective and ubiquitous ceramic magnets, CMS Magnetics is a trusted and reliable supplier of ultra high performance magnets in an assortment of all shapes and sizes.
Additional Information
Neodymium Magnets come in all sorts of sizes strengths and magnet grades are used to identify the strength of a magnet. Grades range from N35, the cheapest and weakest, to N52, for top power
- The Most Accurate Wall Scanner- Tavool specializes in stud finder for years and adopts the most Advance Sensors Technology for accurately & quickly locating studs wood metal AC wires! In all modes, this wall scanner always detect and indicate the Live AC Wire. Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in this electronic stud scanner
- 4 IN 1 Multiplication Plus Deep Detection - This digital wall scanner includes four different scanning modes for woods, beam, joist, metals, AC wires and deeply embedded objects behind floor, ceiling, wall. Stud mode detects wooden beams and joists in drywall up to 1.2 inches. Metal mode detects pipe , rebar, aluminum and copper up to 1.57 inches.Deep mode detects wood and metal parts located up to 1.77 inches while 85~240 volt AC current for voltage and live electrical lines up to 2.36 inches
- Upgrade Design of LCD Screen - Displaying the Desired Stud Material As Well As the Precise Position of the Stud - The Tavool digital stud scanner features large LCD display together with the big sound to detect the accurate location of stud metal Ac wires. When find the material, the LCD display will indicate the direction and the intensity of sound tells whether you are more close to the target. The fast detection saves users time and efforts, making the task completion EASIER
- Automatic Calibration and Ergonomic Grip for Comfortable Use - Turning on the stud finder and Completing Calibration. The automatic calibration before using provides users with maximum reliability and accuracy. Then put it on the wall. The wood beam finder will flash once it has picked up the edge of a stud.The ergonomic design of this wall stud finder makes it comfortable to hold from any angle
- Professional Design with Top Quality - Tavool has been dedicated to Research and develop stud finders for many years, and we have a professional team and mature productions process. This stud joist finder wall detector can quickly locate the metal wood AC wire that are hidden in the walls, floors and ceilings of your house, help you find the exact stud while installing TVs, cabinets, garage shelves etc.
User questions & answers
Question: | Is there an instruction manual online? I misplaced the manual that came in the box |
Answer: | Si puede solicitar un manual de instrucciones en [email protected] |
Question: | Will this locate studs behind bathroom tiles |
Answer: | If your tile wall has cement backer board, then this device will not work. If your tile is backed by sheetrock, then it will probably work unless your tile is took thick. I wouldn't trust it to locate pipes behind tile, so take care if you're working in a bathroom. |
Question: | Is the battery included |
Answer: | No the 9volt battery is not included. |
Question: | Can this detect a stud behind plaster walls |
Answer: | This tud finder can quickly locate metal, studs, joists, pipes, live AC wire behind all kinds of walls floors and ceilings but except the cement board wall, you can use it on popcorn ceilings, plaster walls, textured surfaces,etc |
Product features
Stud Scan Detection
Deep Scan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. DeepScan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. To minimize false positives and/or finding other objects further behind the wall that may not be a stud, always start your scan in StudScan Mode first.
Metal Scan Detection
Tavool wall canner will locate metal studs in StudScan, DeepScan, and Metal Scan Modes. Since Tavool stud finders are looking for a change in density behind drywall, not a particular material, in StudScan and DeepScan Modes the detector will react to metal studs the same as it would for wooden studs.
After you detect the center of a object, Please Use Metal Scan to determine if the previous reading in Stud scan was a wood stud, metal stud, or pipe.
Live AC Wire Detection
AC Wire detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51 mm) deep. In all modes, this wall scanner always detect and indicate the Live AC Wire.
Note: AC Wire Detection works in both StudScan / DeepScan / MetalScan Modes. The AC Wire Detection Icon will flash when live, unshielded wires are detected.
Step 1:Calibrate the tool before every scan
After choose the mode, press and hold the scan button( on the side of the tool) to calibrate this tool. Wait for the reducing bars disappeared and beep to confirm calibration has completed.
In stud/deep mode, put it on the wall where you want to detect to calibrate it ;In AC/Metal mode, put it in the air to calibrate it.
Step 2: Scan the wall
Hold down the button, then move the stud finder along the wall slowly, if shake or lift the scanner accidently, the device needs to be re-calibrate.
The narrow on the screen togather with the beep signal alter, guides you to find the location of the stud.
Step 3: Find the location of the stud
When the signal bar is full and the beep alarm is loudest, it means you have found the center of an object.Mark it with your pencil.
Then choose the Metal Scan mode to test whether it is a metal. After you confirm that it is not a metal, it means that you found the center of a stud. (More details refer to the above description of "Metal Scan Detection")Then you can drill it to hang thing
- 【5 IN 1 SCANNING MODES】 TACKLIFE stud finder DMS05 equipped with five scanning modes for wood, beam, joist, ferrous metals, AC wires and deeply embedded objects behind floor, ceiling, wall. Stud mode detects wooden beams and joists up to 1.5 inches (38 mm). Metal mode detects pipe, aluminum up to 4.0 inches (100mm) and non-ferrous metals up to 3.15 inches (80mm).Live AC wires up to 2 inches (50mm).
- 【PIN-TYPE MOISTURE METER】Prevent water damage to your home. Quickly discover hidden water damage in floors, walls and under carpets. Moisture Measurement Range (wood: 5%-50%, building materials: 1.5%-33%, error range: +/-2%).
- 【AUDIO ALARM】 Audio alarm will be louder while the closer the target is. Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in this electronic stud scanner.
- 【ADDITIONAL HIGHLIGHTING DESIGN】- In/cm units switch by long pressing the ¡°wood¡± and ¡°mositure¡± button together; sound on/off by long pressing the ¡°wood¡± and ¡°metal/AC wires¡± button together; auto shut down after 5 mins of inactivity; self celibration and data hold.
- 【WHAT’S INCLUDED】1 x TACKLIFE DMS05 stud finder, 1 x User Manual, 1 x 9V Battery, 1 x Packing Bag, 2 year warranty. Our after-sales customer service is available in any time. Please feel free to contact us for help.
User questions & answers
Question: | Can anyone compare this to the 4-in-1 version? is it just the moisture meter? it looks like maybe the screen is a little different. better? worse |
Answer: | I would think that it would. I would first take one sickness of newspaper to the area to be scanned to have a smooth surface to slide the stud Sensor on. Then, double-click for deep sensing and search for studs. |
Question: | Can it find a live wire in wood mode |
Answer: | Hi. Powering the unit on is calibrating it. As soon as the "trucal" green LED is lit, the unit is calibrated and ready to scan. Thanks. |
Question: | Where can I download a user manual |
Answer: | Had no idea, so I just tried it. Sure does. It even found the electrical going to the ceiling fan. |
Question: | Is detection reliable through concrete walls |
Answer: | Hi Shawna. The Zircon StudSensor Pro SL-AC stud finder requires one brand new 9 volt alkaline battery. For optimal performance, please use a battery with an extended expiration date of at least three years beyond the current date. Thank you. |
Product features
5 Scanning Modes Maximum Scanning Depth
The Tacklife stud finder DMS05 has 5 ways to help you detect.
Ferrous metals: 4-3/4˝ / 120mm
Non-ferrous metals(Copper): 3-1/8˝ / 80mm
Copper conductors (live AC):2˝ / 50mm
Wood exact mode: 3/4˝ / 20mm
Wood deep mode: 1-1/2˝ / 38mm
Moisture test pins length: 0.3˝ / 8mm
Step One
- Hold the tool straight up and down, parallel to the studs, and do not rotate the tool.
- Keep tool flat against the wall and do not rock, tilt, or press hard when slowly sliding across the surface being scanned.
Step Two
- Move the detector uniformly over the surface without lifting it off or changing the applied pressure (During the scan, the detector must cling to the wall).
- As the detector begin to approach a stud, the scale h will increase, and the percentage of intensity will also increase, the yellow light will be on.
Step Three
- When the red light is on, the buzzer will sound, the scale and the percentage will increase to the max, the center of stud is located. At this time, make a mark below the top groove of the detector.
1.Ready for metal detecting
- Short press the button on the right side with " 工" shown on the display to enter metal detecting mode (default mode);
- When the detector is far away from the metal, there's with green light on and the signal strength is empty in 0%;
- Move the tool uniformly across the surface
2.Sign the first point
- When the light turns into yellow and the detecting signal strengthen, the detector is close to the metal with a steady tone sound;
- Sign the first point for recording to remind yourself
3.Sign the second point
- As the light turns from yellow/ red to yellow and the signal strength percentage decrease to like the result as step 2,the buzzer will stop sounding;
- Sign the second point for recording as the same as before
4.Get exact position
- Combine the two points from step 2 and step 3 together, make a midpoint to confirm the exact location of the metal;
- Tips for ensuring the materials with magnetic or not: Magnetic / Non-magnetic metal indicator nearby the " 工" will appear
- GREAT ACCURACY AND CONSISTENCY - Tavool stud finder is professionally designed! Tavool stud finders uses the UPGRADE INTERNAL SENSORS. It senses a change in density in the space behind the wall and locates the stud center with GREAT ACCURACY. In additions. The shape of this wall scanner also shows the edges of the stud. The center of a stud is the most secure location when mounting anything heavy. The edges help you to recheck the locations. Take it home, makes your DIY homework easier!
- 5 SCANNING MODES UP TO 60MM DEPTH - Tavool stud locator has mufti-fuctions and can quickly and easily locates wood metal studs joists beams metal pipe rebar and live AC wire behind walls, floors, and ceilings. StudScan Mode scans through one layer of drywall up to 0.5 in.(12mm) and 1 in . (25mm) thick. DeepScan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. Deep Stud Scan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard
- WIRE WSRNNING INDICATOR, NO FEAR OF DRILLING INTO A LIVE WIRE - WireWarning Detection is up to 2 in.(51mm) deep. The added bonus is that the wire warning is ALWAYS ON while you are scanning in StudScan/DeepScan/MetalScan Modes, to alert you to the presence of live, unshielded electrical AC wires up to 2 in. (50 mm) deep, which helps you avoid drilling or hammering into a water pipe or electrical wire.Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in it
- EASY TO READLCD DISPLAY +SOULD WARNING HELPS FIND STUD CENTER AND STUD DEGES EASILY - Displaying the Desired Stud Center As Well As the Precise Position of the Stud - The Tavool digital stud detector features large LCD display together with the big sound warning to detect the accurate location of the objects. When find the material, the LCD display will indicate the direction and the intensity of beeping tells whether you are more close to the target. The fast detection saves users time greatly
- WHY RECOMMEND TAVOOL STUD FINDER TO YOU: Tavool has been dedicated to Research and develop stud finders for many years, and we have a professional team and mature productions process. Tavool stud finder not only gives you top quality and great accuracy, but also provide muti-functions to meet your practical needs on drywall, lathe wall, ceiling, plasterboard wall, wallboard etc.
Product features
Stud Scan Detection
This stud locator has 3 stud scan modes. Deep Scan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. DeepScan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. To minimize false positives and/or finding other objects further behind the wall that may not be a stud, always start your scan in StudScan Mode first.
Metal Scan Detection
Tavool wall canner will locate metal studs in StudScan, DeepScan, and Metal Scan Modes. Since Tavool stud finders are looking for a change in density behind drywall, not a particular material, in StudScan and DeepScan Modes the detector will react to metal studs the same as it would for wooden studs.
After you detect the center of a object, Please Use Metal Scan to determine if the previous reading in Stud scan was a wood stud, metal stud, or pipe.
Wire Warning Detection
Wire Warning detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51 mm) deep. For Safety, in all modes, this wall scanner always detect and indicate the Live AC Wire.
Note: WireWarning Detection works in both StudScan / DeepScan / MetalScan Modes. The WireWarning Detection Icon will flash when live, unshielded wires are detected.
Step 1:Calibrate the tool before every scan
After choose the mode, press and hold the scan button( on the side of the tool) to calibrate this tool. Wait for the reducing bars disappeared and beep to confirm calibration has completed.
In stud/deep mode, put it on the wall where you want to detect to calibrate it ;In AC/Metal mode, put it in the air to calibrate it.
Step 2: Scan the wall
Hold down the button, then move the stud finder along the wall slowly, if shake or lift the scanner accidently, the device needs to be re-calibrate.
The narrow on the screen togather with the beep signal alter, guides you to find the location of the stud.
Step 3: Find the location of the stud
When the signal bar is full and the beep alarm is loudest, it means you have found the center of an object.Mark it with your pencil.
Then choose the Metal Scan mode to test whether it is a metal. After you confirm that it is not a metal, it means that you found the center of a stud. (More details refer to the above description of "Metal Scan Detection")Then you can drill it to hang thing
Product description
Upgraded 5 in 1 stud finder from JAXWQ provide users with more wider detect performance, more accurate and deeper detect range.
1.Feature:
Ergonomic anti-slip handle provide comfort and control of the tool.
Intelligent Microprocessor chip, get the most accurate and fast results
HD graphical LCD display Audio Alarm
Auto-calibration function to provides users with maximum reliability.
2.How to use JURGEN K stud finder?
Step 1: Calibrate the tool before every scan
Choose the scan model at first, then place unit flat on the wall, press the power button to power on, press the Scan button(on the right side of the tool) to start calibration. Wait for the reducing bars disappears and beeps to confirm calibration has completed.
In stud/deep mode, put it on the wall where you want to detect to calibrate it ; In AC/Metal mode, put it in the air to calibrate it.
Note: It is important to wait for calibration to complete (2–3 seconds) every time.
Step 2: Start to scan
After Calibration, then moves the stud finder along the wall slowly, The narrow on the screen together with the beep signal alter, guides you to find the location of the stud.
Note:
1. if shake or lift the scanner coincidentally, the device needs to be re-calibrate.
2.if you can not scan the object from left to right, please try to scan up and down.
Step 3: Find the location of the stud
When the signal bar is full and the beep alarm is loudest, it means you have found the center of an object. Mark it with your pencil.
Then choose the Metal Scan mode to test whether it is a metal. After you confirm that it is not a metal, it means that you found the center of a stud.
- Accurate and Rapid: The stud finder adopts an intelligent micro-sensor chip with the highest sensitivity which can accurately and quickly find edges and center of metal, studs, joists, pipes, live AC wire behind walls, floors and ceilings. Fast detection saves users time and effort, making the task completion easier. No matter professionals, homeowner and DIY enthusiasts, it must be an ultimate choice.
- 5 in 1 Multi-function Detection: The upgraded 5-in-1 mode provides users with more detection needs. 1/2 inch scan mode locates the center and edges of wood and metal studs up to 1/2 inch deep; medium scan locates the center and edges of wood and metal studs up to 1 inch deep; Deep scan locates the center and edges of wood and metal studs up to 1.5inch deep; Metal scan detects metal (Ferrous and Non-Ferrous Metal) up to 2.36 inch deep; AC scan detects live unshielded AC wires up to 2 inches deep.
- Digital LCD Display & Audio Alarm: This stud finder comes with large LCD display and sound alarm, which can detect the exact location of the objects. When find the objects, the LCD display will indicate the direction and the intensity of beeping tells whether you are more close to the target. This LCD also features back-lit function which can provides a clear appearance even in low light conditions, indicating detection mode, center pointing, low battery indication ect.
- Easy to Use & Auto Calibration: Easy-to-read LCD display and ergonomic anti-slip handle provide users with comfort and convenience while scanning. The wall detector can be automatically calibrated anywhere on the wall to successfully find the center of studs in one step. This function provides maximum reliability to the user, greatly reduces errors in the application, and ensuring that most objects behind the wall can be detected.
- Wide Use: This stud detector quickly locates wood, metal and AC wires hidden in the walls, floors and ceilings of the house. It can work on different wall surfaces, such as lath, wallpaper wood flooring, acoustic ceiling, painted walls, etc. helping you avoid danger when installing TVs, cabinets, garage racks, etc.
User questions & answers
Question: | Can this unit locate studs through ceramic tile |
Answer: | Yes, its accuracy left a deep impression on me. |
Question: | Will it work on popcorn ceilings |
Answer: | Yes, I successfully found the stud behind the wall. |
Question: | Is it able to detect live wires in the wall |
Answer: | /Duration -:-Loaded: 0%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:00 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } Please choose the mode you need, follow the instructions, super easy to operate. |
Question: | Is it accurate |
Answer: | /Duration -:-Loaded: 0%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:00 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } yes |
Latest Reviews
View all
Band Saw Blade For Metal
- Updated: 17.07.2023
- Read reviews

The Cheapest Pokemon Booster Boxes
- Updated: 22.03.2023
- Read reviews

Upper Deck Card Yugiohs
- Updated: 04.02.2023
- Read reviews

Leapfrog Of The West Toys
- Updated: 19.02.2023
- Read reviews

Dust Collector Controls
- Updated: 21.06.2023
- Read reviews