13 best center stud finder

• The Most Accurate Wall Scanner- Tavool specializes in stud finder for years and adopts the most Advance Sensors Technology for accurately & quickly locating studs wood metal AC wires! In all modes, this wall scanner always detect and indicate the Live AC Wire. Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in this electronic stud scanner
• 4 IN 1 Multiplication Plus Deep Detection - This digital wall scanner includes four different scanning modes for woods, beam, joist, metals, AC wires and deeply embedded objects behind floor, ceiling, wall. Stud mode detects wooden beams and joists in drywall up to 1.2 inches. Metal mode detects pipe , rebar, aluminum and copper up to 1.57 inches.Deep mode detects wood and metal parts located up to 1.77 inches while 85~240 volt AC current for voltage and live electrical lines up to 2.36 inches
• Upgrade Design of LCD Screen - Displaying the Desired Stud Material As Well As the Precise Position of the Stud - The Tavool digital stud scanner features large LCD display together with the big sound to detect the accurate location of stud metal Ac wires. When find the material, the LCD display will indicate the direction and the intensity of sound tells whether you are more close to the target. The fast detection saves users time and efforts, making the task completion EASIER
• Automatic Calibration and Ergonomic Grip for Comfortable Use - Turning on the stud finder and Completing Calibration. The automatic calibration before using provides users with maximum reliability and accuracy. Then put it on the wall. The wood beam finder will flash once it has picked up the edge of a stud.The ergonomic design of this wall stud finder makes it comfortable to hold from any angle
• Professional Design with Top Quality - Tavool has been dedicated to Research and develop stud finders for many years, and we have a professional team and mature productions process. This stud joist finder wall detector can quickly locate the metal wood AC wire that are hidden in the walls, floors and ceilings of your house, help you find the exact stud while installing TVs, cabinets, garage shelves etc.

User questions & answers

Question:	Is there an instruction manual online? I misplaced the manual that came in the box
Answer:	Si puede solicitar un manual de instrucciones en [email protected]
Question:	Will this locate studs behind bathroom tiles
Answer:	If your tile wall has cement backer board, then this device will not work. If your tile is backed by sheetrock, then it will probably work unless your tile is took thick. I wouldn't trust it to locate pipes behind tile, so take care if you're working in a bathroom.
Question:	Is the battery included
Answer:	No the 9volt battery is not included.
Question:	Can this detect a stud behind plaster walls
Answer:	This tud finder can quickly locate metal, studs, joists, pipes, live AC wire behind all kinds of walls floors and ceilings but except the cement board wall, you can use it on popcorn ceilings, plaster walls, textured surfaces,etc

Product features

Stud Scan Detection

Deep Scan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. DeepScan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. To minimize false positives and/or finding other objects further behind the wall that may not be a stud, always start your scan in StudScan Mode first.

Metal Scan Detection

Tavool wall canner will locate metal studs in StudScan, DeepScan, and Metal Scan Modes. Since Tavool stud finders are looking for a change in density behind drywall, not a particular material, in StudScan and DeepScan Modes the detector will react to metal studs the same as it would for wooden studs.

After you detect the center of a object, Please Use Metal Scan to determine if the previous reading in Stud scan was a wood stud, metal stud, or pipe.

Live AC Wire Detection

AC Wire detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51 mm) deep. In all modes, this wall scanner always detect and indicate the Live AC Wire.

Note: AC Wire Detection works in both StudScan / DeepScan / MetalScan Modes. The AC Wire Detection Icon will flash when live, unshielded wires are detected.

Step 1:Calibrate the tool before every scan

After choose the mode, press and hold the scan button( on the side of the tool) to calibrate this tool. Wait for the reducing bars disappeared and beep to confirm calibration has completed.

In stud/deep mode, put it on the wall where you want to detect to calibrate it ;In AC/Metal mode, put it in the air to calibrate it.

Step 2: Scan the wall

Hold down the button, then move the stud finder along the wall slowly, if shake or lift the scanner accidently, the device needs to be re-calibrate.

The narrow on the screen togather with the beep signal alter, guides you to find the location of the stud.

Step 3: Find the location of the stud

When the signal bar is full and the beep alarm is loudest, it means you have found the center of an object.Mark it with your pencil.

Then choose the Metal Scan mode to test whether it is a metal. After you confirm that it is not a metal, it means that you found the center of a stud. (More details refer to the above description of "Metal Scan Detection")Then you can drill it to hang thing

Product description

The StudSensor A150 is Zircon’s newest center locating electronic stud finder that is sold exclusively on Amazon. The A150 is designed with a smooth, ergonomic rubber grip allowing for a comfortable yet secure hold for any size hand, at any angle. This stud finder uses the most recent technology in density detecting software and circuitry. The scanner has 2 scanning modes to locate the center and edges of wood and metal studs and joists behind walls, floors, and in ceilings up to 1.5 inches (38 mm) deep. In StudScan Mode, the SS A150 locates the center and edges of shallower wood or metal studs up to 0.75 of an inch (19 mm) deep. Switch over to DeepScan Mode to double the scanning depth to 1.5 inches (38 mm). This stud sensor is programmed with a Wire Warning Detection feature that indicates the presence of live unshielded electrical wires up to 2 inches (50 mm) deep when using either stud scanning modes. Finding studs using this center and edge finding tool is simple. To get started, install one brand new 9V alkaline battery (not included). Place the unit flat against the wall and press the Power Button to calibrate the sensor. Once you hear a beep indicating calibration is complete, continue to hold the Power Button and slowly slide the tool across the surface. The Signal Strength Bars will appear on the LCD screen when a stud is detected. As the stud finder detects the edge of a stud, “EDGE” will appear in the LCD screen. Continue to slide the tool along the wall until you hear an audio tone and see both the patented arrow-shaped SpotLite Pointer as well as “CENTER” on the LCD. These signs indicate the center of the stud has been found. Make sure to note whether the Wire Warning Detection is alerting you to live, unshielded AC wiring before drilling into the center of the stud. With the Zircon StudSensor A150, you can safely maneuver through the most complicated of projects with the professional confidence that comes from owning a Zircon.

• The Zircon ss A150 electronic stud scanner is sold exclusively on amazon and detects the center and edges of wood and metal studs up to 1.5 inches (38 mm) deep
• Wire Warning Detection indicates the presence of live, unshielded electrical AC wiring while scanning in StudScan and DeepScan modes
• Target indication bars appear when a stud is detected and increase as the target is approached; the patented spotlite pointing system shines and an audio Tone sounds when the stud center is located
• Ergonomically designed grip allows a comfortable hold on the tool for any size hand, at any angle
• One fully charged 9V battery, not included, is required for the stud scanner to run at optimal performance to help you easily find studs and avoid hazards

User questions & answers

Question:	Can this pick up studs behind drywall attached to plywood
Answer:	whats the accuracy @ 100 feet ? Someone answered .005, that's 5/1000 of an inch @ 300 feet and I know that's not correct.
Question:	any good cases available for this
Answer:	std screw on connection, will attach to most tripods, i bought this one DEWALT DW0737 Heavy-Duty Tripod https://www.amazon.com/dp/B000RFRM0O/ref=cm_sw_r_em_apa_i_W82KCbKZB10KS
Question:	Does it find pvc water pipes
Answer:	No this is not a re chargeable you buy replacement batteries
Question:	Is the metal scanning worth the extra money for occasional home use
Answer:	In the dark yes there is a visible line

Product features

Zircon StudSensor A150

The SS A150 is a handheld tool dedicated to quickly and efficiently find studs and alert you of live AC wiring. The A150 comes equipped with 2 scanning modes: StudScan and DeepScan.

Locate Studs and Scan for Live AC Wiring Safely and Efficiently

The Zircon StudSensor A150 makes scanning easy with its newly designed ergonomic grip. The tool's StudScan finds shallower wood or metal studs up to 0.75 in. (19 mm) deep. Simply press the Power Button twice to double the scanning depth to 1.5 in. (38 mm) in DeepScan Mode.

The A150 also includes WireWarning Detection that automatically operates in StudScan and DeepScan Modes. This safety feature alerts you to the presence of live, unshielded electrical AC wires while scanning for studs.

Before use, always be sure to install a brand new 9V alkaline battery. Zircon stud finders, particularly those with LCD screens, require and consume a great deal of current from batteries. For optimal performance, brand-new, recently purchased alkaline batteries with an extended expiration date, are strongly recommended for use in these tools.

StudScan and DeepScan

Use StudScan Mode to find the center, edges, and direction of wood or metal studs up to 0.75 in. (19 mm) deep.

For best results, always start in StudScan Mode when looking for studs.

If StudScan Mode provides irregular readings, or the Signal Strength Indicator is weak, the studs might be behind deeper than 0.75 in. (19 mm). Quickly press the Power Button twice and hold it down after the second press to switch to DeepScan Mode. This doubles the scanning depth to 1.5 in. (38 mm) deep and allows for increased accuracy on deeper targets.

Before scanning, hold the A150 flat against wall and press the Power Button to calibrate. Be sure not to move the tool while calibrating. After a short beep sounds confirming calibration is complete, continue pressing the Power Button and slide the tool slowly against the surface.

When the A150 finds the edges and center of a stud, 'Edge' and 'Center' displays respectively, indicating you have found your target. When the stud's center is located, the SpotLite Pointer also illuminates and a short beep sounds.

The center of the stud is the stud's most secure location. It is critical to drill in the center of a stud when mounting heavy objects.

Note: WireWarning Detection works in both StudScan and DeepScan Modes. The WireWarning Detection Icon will flash when live, unshielded wires are detected.

WireWarning Detection

Be Alerted of Electrical Wires in Both Modes.

WireWarning Detection is a feature that is always on while scanning in StudScan and DeepScan Scan Modes.

It alerts you to the presence of live, unshielded, electrical AC wires up to 2 inches (50 cm) deep.

As you approach an area with live AC voltage, a lightning bolt icon will display on the LCD screen. This the WireWarning Detection Icon. If your scan directly starts over an area with live AC voltage, the WireWarning Detection Icon will flash.

Note: Please turn off the electricity and use extreme caution in areas where live AC voltage is detected before nailing or drilling.

Auto Correcting Technology (ACT)

Automatically Have Common Errors Corrected.

This feature enables the tool to automatically adjust for common calibration errors. It checks calibration 10 times per second and automatically recalibrates when/if needed. If scanning begins directly over a stud, the tool will transparently recalibrate, so you don't have to, and will find that stud when you scan back over it.

This recalibration is usually transparent and no indication is made. If an arrow icon illuminates, the tool was calibrated near or over a stud and then moved away. The arrow indicates the direction of the missed stud.

Frequently Asked Questions

Question: Does the StudSensor A150 include a battery?

Answer: No. Zircon stud finders and detectors, particularly those with LCD screens, require and consume a great deal of current from batteries. For optimal performance, a brand-new, recently purchased 9V alkaline battery with an extended expiration date, is not included but is required to properly power the A150.

Question: I inserted a 9V battery, but the tool doesn't turn on or is giving me strange readings. Is my tool broken?

Answer: Please be sure to use a fresh, brand new 9V alkaline battery with an extended expiration date. Batteries that may work in a smoke detector or remote control may not have adequate voltage to power the sensing technology in StudSensors.

Question: Does this tool need to be calibrated?

Answer: Yes, as with all Zircon tools, the StudSensor A150 needs to calibrate to the surface before scanning. Calibrating the tool on an empty wall gives the device a chance to measure the wall thickness and material density, as well as register factors like humidity, temperature, and even the minor electric readings from your hand, which all have an impact on the readings from the wall. Calibrating is easy and just takes a second. To calibrate, simply place the unit flat against the surface to be scanned and press the Power Button. When powering the A150 on, all the icons on the screen and the SpotLite Pointing System will briefly flash and the tool will beep. After this occurs, the screen will then clear and, depending on the selected mode, the words 'StudScan' or 'DeepScan' will remain, indicating that calibration has occurred and the tool is ready to begin scanning. It is important not to move the tool or begin scanning until the calibration process has taken place for the most accurate results.

Question: What does 'Center Finding' mean?

Answer: Center Finding stud finders locate both the edges AND the center of wood and metal studs and joists in one step. 'Edge Finding' stud finders, on the other hand, only find the edges of studs, so you must determine the center. Finding the center of the stud to mount heavy objects is critical as the stud's center is the most secure location of the stud.

Question: What is DeepScan Mode?

Answer: Unlike StudScan Mode, which scans through one layer of drywall up to 0.75 in. thick (19 mm), DeepScan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. DeepScan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. Extra layers in a wall can make it difficult to find studs in regular StudScan Mode. To minimize false positives and/or finding other objects further behind the wall that may not be a stud, always start your scan in StudScan Mode first.

Question: How can I be certain the objects found behind my wall are studs in DeepScan Mode?

Answer: DeepScan Mode has increased sensitivity so you may have located something other than a stud. Studs are equally spaced to either side (12, 16, or 24 in. apart) and typically run from floor to ceiling. To better confirm that what you found is a stud, check for other studs equally spaced to either side and for the same stud at several heights directly above and below the first stud indication. A stud reading would also measure approximately 1.5 in. (38 mm) apart from each edge. Anything larger or smaller may not be a stud if not near a door or window.

Question: Will this StudSensor A150 locate metal studs?

Answer: Yes, the A150 will locate metal studs in StudScan and DeepScan Modes. Since stud finders are looking for a change in density behind drywall, not a particular material, in StudScan and DeepScan Modes the detector will react to metal studs the same as it would for wooden studs. The A150 will locate wood and metal studs up to 0.75 in. (19 mm) deep while DeepScan Mode locates targets up to 1.5 in. (38 mm) deep.

Question: Why does the tool beep and the lights flash when scanning for a stud?

Answer: The tool could've been calibrated over a stud, calibrated on a dense part of the wall, or the back of the unit may have slightly lifted or tilted during the scan. Move the StudSensor A150 over a couple of inches to the left or right, re-calibrate, and start your scan again.

Question: What is WireWarning Detection?

Answer: WireWarning Detection is a feature that is always on while you are scanning in StudScan and DeepScan Modes to alert you to the presence of live, unshielded, electrical AC wires up to 2 in. (50 mm) deep. As you approach an area with live AC voltage, a lightning bolt icon will display on the LCD screen. This is the WireWarning Detection Icon. If your scan directly starts over an area with live AC voltage, this icon will flash. Please turn off the electricity and use extreme caution in areas where live ac voltage is detected before nailing or drilling.

Question: Why does the area of voltage appear much larger than an actual wire?

Answer: Static charge may develop on drywall, spreading voltage detection as much as 12 in. (30 cm) laterally from each side of an actual wire. To narrow detection, turn the tool off and on again at the edge of where the wire was first detected and repeat the scan.

Question: I suspect electrical wires in a certain area when I scan, but why am I not detecting any?

Answer: Wires may be shielded in metal conduit or behind a metallic wall covering. It could also be that the wire is deeper than 2 in. (50 mm) or that the wire may not be live (hot). Always exercise extreme caution when working near electricity.

Question: Does the A150 work on wood paneling and other wood surfaces?

Answer: The A150 is optimized to scan through standard interior sheetrock / drywall (gypsum) construction. This tool will work on wood, plywood, wood paneling and particle board up to 1.5 in. (38 mm) thick when in DeepScan Mode.

Question: Will the A150 work on textured wall surfaces, acoustic ceilings, or wallpaper?

Answer: Yes, the A150 will work on textured surfaces and dried wallpaper as long as it does not contain any metallic foil or fibers. For highly textured walls or acoustic ceilings, place or tape a thin piece of cardboard onto the surface to be scanned. Recalibrate and scan over the cardboard in DeepScan Mode.

Question: Can I use this tool to find studs behind carpet?

Answer: No. Zircon tools are designed for hollow interior walls. They will generally work well to find studs or joists through a plywood subfloor, after the carpeting/flooring has been removed.

Question: Will the A150 work on ceramic tile?

Answer: While the StudSensor A150 may be able to scan through ceramic tile in DeepScan mode to locate studs, the many variable layers behind tiled surfaces make it one of the more difficult scanning environments.

Question: Does this StudSensor work on lath and plaster?

Answer: No. Due to irregularities in plaster thickness, this tool is not recommended for use on lath and plaster.

Question: What does the Signal Strength Indicator do?

Answer: To help you filter out the target from potential decoys that would give the A150 a false reading, the Signal Strength Indicator gives a reading of the strength, or the certainty, of the returning signal from the wall. Three bars (the highest level) indicates an obvious result behind a normal wall, while two bars (or below) indicates that while the device has found something, it may either be a smaller object than your target, or the target is behind an extra thick wall. Since every wall is built differently, and since any wall can have pipes, wires, or other objects behind it that can return a result, you can use the Signal Strength Indicator to 'map out' your wall to determine the target from the other objects.

Question: Can I use this tool to scan the outside wall of my house?

Answer: No. Zircon StudSensors are designed and recommended for interior use only.

Question: I'm planning to mount my new flat screen TV to the wall. Will this tool help me?

Answer: Yes. The A150 is ideal for basic home or office projects. The center-finding technology allows you to easily find and mark the center of the stud for secure mounting of TV's and AV equipment, closet or garage shelving, heavy mirrors, light fixtures, coat racks and more.

Question: Is the tool waterproof?

Answer: No. The StudSensor A150 is splash and water resistant, but not waterproof.

Question: What is the difference between magnetic and electronic stud finders?

Answer: Magnetic stud finders are simply magnets that look for anything magnetic behind a wall. Typically, they are advertised to find screws or nails that hold the wall surface to the studs. However, nails often times are not placed in the center of studs, making it difficult to determine where the stud's center is or how wide the stud is.

Electronic stud finders, such as the A150, on the other hand, operate by detecting density changes behind a surface (like a wall) and will clearly and precisely indicate the edges and center of a stud. The center of a stud is the most secure location when mounting anything heavy. For applications like mapping out floor joists, electronic stud finders have an advantage over magnets because they are not attracted to nails holding floor boards to a subfloor, as well as nails in joists.

Question: Does the StudSensor A150 come with a warranty?

Answer: The StudSensor A150 includes limited one year warranty when fulfilled by and shipped from Amazon.

Question: Where can I get help using my StudSensor A150?

Answer: Zircon's team of Tool Pro Experts provide superior customer service. They know the ins and outs about tools, construction, and the challenges that DIYers and professionals face. Rest assured, at Zircon you can reach live, knowledgeable, honest people who want to work with you.

Zircon also provides support via an online 24/7 interactive support center, step-by-step instructions, how-to videos, and online engagement. Visit Zircon's website today.

• GREAT ACCURACY AND CONSISTENCY - Tavool stud finder is professionally designed! Tavool stud finders uses the UPGRADE INTERNAL SENSORS. It senses a change in density in the space behind the wall and locates the stud center with GREAT ACCURACY. In additions. The shape of this wall scanner also shows the edges of the stud. The center of a stud is the most secure location when mounting anything heavy. The edges help you to recheck the locations. Take it home, makes your DIY homework easier!
• 5 SCANNING MODES UP TO 60MM DEPTH - Tavool stud locator has mufti-fuctions and can quickly and easily locates wood metal studs joists beams metal pipe rebar and live AC wire behind walls, floors, and ceilings. StudScan Mode scans through one layer of drywall up to 0.5 in.（12mm) and 1 in . (25mm) thick. DeepScan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. Deep Stud Scan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard
• WIRE WSRNNING INDICATOR, NO FEAR OF DRILLING INTO A LIVE WIRE - WireWarning Detection is up to 2 in.(51mm) deep. The added bonus is that the wire warning is ALWAYS ON while you are scanning in StudScan/DeepScan/MetalScan Modes, to alert you to the presence of live, unshielded electrical AC wires up to 2 in. (50 mm) deep, which helps you avoid drilling or hammering into a water pipe or electrical wire.Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in it
• EASY TO READLCD DISPLAY +SOULD WARNING HELPS FIND STUD CENTER AND STUD DEGES EASILY - Displaying the Desired Stud Center As Well As the Precise Position of the Stud - The Tavool digital stud detector features large LCD display together with the big sound warning to detect the accurate location of the objects. When find the material, the LCD display will indicate the direction and the intensity of beeping tells whether you are more close to the target. The fast detection saves users time greatly
• WHY RECOMMEND TAVOOL STUD FINDER TO YOU: Tavool has been dedicated to Research and develop stud finders for many years, and we have a professional team and mature productions process. Tavool stud finder not only gives you top quality and great accuracy, but also provide muti-functions to meet your practical needs on drywall, lathe wall, ceiling, plasterboard wall, wallboard etc.

Product features

Stud Scan Detection

This stud locator has 3 stud scan modes. Deep Scan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. DeepScan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. To minimize false positives and/or finding other objects further behind the wall that may not be a stud, always start your scan in StudScan Mode first.

Metal Scan Detection

Tavool wall canner will locate metal studs in StudScan, DeepScan, and Metal Scan Modes. Since Tavool stud finders are looking for a change in density behind drywall, not a particular material, in StudScan and DeepScan Modes the detector will react to metal studs the same as it would for wooden studs.

After you detect the center of a object, Please Use Metal Scan to determine if the previous reading in Stud scan was a wood stud, metal stud, or pipe.

Wire Warning Detection

Wire Warning detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51 mm) deep. For Safety, in all modes, this wall scanner always detect and indicate the Live AC Wire.

Note: WireWarning Detection works in both StudScan / DeepScan / MetalScan Modes. The WireWarning Detection Icon will flash when live, unshielded wires are detected.

Step 1:Calibrate the tool before every scan

After choose the mode, press and hold the scan button( on the side of the tool) to calibrate this tool. Wait for the reducing bars disappeared and beep to confirm calibration has completed.

In stud/deep mode, put it on the wall where you want to detect to calibrate it ;In AC/Metal mode, put it in the air to calibrate it.

Step 2: Scan the wall

Hold down the button, then move the stud finder along the wall slowly, if shake or lift the scanner accidently, the device needs to be re-calibrate.

The narrow on the screen togather with the beep signal alter, guides you to find the location of the stud.

Step 3: Find the location of the stud

When the signal bar is full and the beep alarm is loudest, it means you have found the center of an object.Mark it with your pencil.

Then choose the Metal Scan mode to test whether it is a metal. After you confirm that it is not a metal, it means that you found the center of a stud. (More details refer to the above description of "Metal Scan Detection")Then you can drill it to hang thing

• 【4 IN 1 SCANNING MODES】 TACKLIFE stud finder DMS03 equipped with four scanning modes for wood, beam, joist, ferrous metals, AC wires and deeply embedded objects behind floor, ceiling, wall.
• 【ADVANCED ACCURACY】 Stud mode detects wooden beams and joists up to 1.5 inches (38 mm). Metal mode detects pipe, rebar, aluminum up to 4.0 inches (100mm) and non-ferrous metals up to 3.15 inches (80mm).Live AC wires up to 2 inches (50mm). Accuracy rate increased from 80% to 98%!
• 【UPGRADED LCD SCREEN & THREE SIGNAL LIGHTS 】 Instead of the traditional LCD screen, TACKLIFE DMS03 stud sensor equipped HD DISPLAY SCREEN which could show scan modes, detection depth, detection strength, battery level clearly. The signal light shows green when the detector get ready, as getting closed to the center of stud, the indicator will turn yellow to red.
• 【AUTOMATIC CALIBRATION & AUDIBLE WARNING】 The wall detector could calibrate automatically – no further action required! The fast detection saves users time and efforts, making the task completion easier. Audible warning which helps you avoid drilling or hammering into a water pipe or electrical wire.
• 【USER-FRIENDLY】 This metal detector with ergonomic design, which satisfying your DIY and home projects; the cotton on the back has prevented the damage caused to the wall. Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in this electronic stud scanner.
• 【WHAT’S INCLUDED】 1 x TACKLIFE DMS03 stud finder, 1 x User Manual, 1 x 9V Battery, 1 x Packing Bag, 2 year warranty. Our after-sales customer service is available in any time. Please feel free to contact us for help.

Product features

Scanning for wood studs

• Maximum detection depth: Exact mode:20mm; Deep mode:38mm.
• Wood detection mode will detect objects in gypsum drywall, plywood sheathing, bare wood flooring, coated wooden wall. Wood detection mode will not detect objects in concrete, mortar, block, brick work, plaster, carpeting, foil-faced materials, metallic surfaces, ceramic tile, glass, or any other dense material.

Scanning for metal objects

• Maximum detection depth: Ferrous metals: 100mm; Non-ferrous metals (Copper): 80mm.
• When the metal is detected, the screen will show the depth value synchronously, but if the signal is weak, or the tool cannot distinguish that the metal object is magnetic or non-magnetic, the depth value will not be displayed. The depth value is the distance from the center of the sensor to the scanned object. At the position of minimum depth value, the metal object is located near the center of the sensor.

Scanning for wires

• Maximum detection depth: 50mm (220V@50Hz / 110V @ 60 Hz).
• The signal strength of a “live” wire depends on the position of the cable. Therefore, apply further measurements in close proximity or use other information sources to check if a “live” wire exists.

How to find the stud

• Hold the tool straight up and down, position it onto the surface to be scanned, and do not rotate the tool.
• Press the mode button briefly to enter the wood stud detection mode, the symbol will flash on the screen. Do not move until the symbol stop flashing and the green light is on, automatic calibration of the tool is completed.

Step 2

• Move the tool uniformly and slowly over the surface without lifting it off or changing the applied pressure. During the scan , the tool must cling the wall, otherwise it will automatically calibrate again. Please wait for the symbol stop flashing and the green light to light up again and then move the tool.

Step 3

• When the tool comes close to a stud, the scale m and the percentage n will increase, the distance indicator l will appear. As the tool gets closer to the stud, the yellow indicator will light. As it detected the center of the stud, the red light is on.

Step 4

• To make the detection results more reliable, when the center is marked, please slide the tool across the wall again to check if the center is near the location of the highest percentage.

Product description

The Zircon StudSensor 70 center finding electronic wall scanner comes loaded with the latest technology in density detecting software and circuitry. Using the patented CenterVision technology, the SS 70 easily locates the center and edges of wood and metal studs and joists behind walls, floors, and in ceilings with just one pass. The specialized SpotLite Pointing System and an audio tone indicate the location of the target. In StudScan mode, the SS70 locates the center and edges of shallower wood or metal studs up to 3/4 of an inch (19 mm) deep. Switch over to DeepScan mode by quickly pressing the Power Button twice to double the scanning depth to 1.5 inches (38 mm). The StudSensor 70 is programmed with a WireWarning Detection feature that indicates the presence of live unshielded electrical wires up to 2 inches (50 mm) deep when using both stud scan modes. The SS 70 also comes equipped with a built-in erasable marker enabling you to mark the hazards or studs with the simple push of a button. To get started, install one brand new 9V alkaline battery (not included). Place the unit flat against the wall and calibrate it. Once you hear the calibration beep and see the “Ready” LED light, continue to hold the Power Button and slowly slide the tool across the surface. As the stud detector approaches the edge of a stud, the red LEDs progressively light from the bottom up in both scanning modes. The top lighted “Center” LED, SpotLite Pointing System, and audio tone all indicate when the stud’s center is found. Make sure to note whether the WireWarning Detection is alerting to live, unshielded AC wiring before drilling between the two marks into the center of the stud. Now delivered to you in our Amazon exclusive easy to open packaging with no clam shells and no twist ties, the SS 70 is ready for use just seconds after you receive it. With the Zircon StudSensor 70, you can safely maneuver through the most complicated of projects with the professional confidence that comes from owning a Zircon.

• The Zircon SS 70 electronic stud scanner detects the edges and center of wood and metal studs and alerts you of live AC wires helping you easily find studs and avoid hazards
• StudScan mode locates the edges of wood or metal studs up to 0.75 inches (19 mm) deep; DeepScan mode locates targets up to 1.5 inches (38 mm) deep; WireWarning Detection indicates the presence of live, unshielded electrical AC wiring while scanning in StudScan and DeepScan modes
• ACT (Auto Correcting Technology) automatically corrects common user errors, such as when scanning begins over a stud, in both StudScan and DeepScan modes
• "Ready" LED lights to indicate when the stud finder is calibrated and ready for use while the patented SpotLite Pointing System illuminates and the audio tone signal sounds when the stud center is located
• Integrated erasable wall marker enables users to mark targets with the simple push of a button

User questions & answers

Question:	I have the old style plaster walls that's super think. Will this still work
Answer:	I believe it is likely to work.
Question:	Will it work through wood paneling
Answer:	Hi. Thank for your question. WireWarning is included on most Zircon stud finders and on all Mutiscanner tools. You can think of it as a safety feature. It will "warn" you when you are in proximity of live AC behind your wall. Depending where you calibrate the scanner on the wall, it's usually within a couple feet / two inches depth. WireWarning is not designed to trace live AC, or point out exactly where the line is. AC scan will allow you to trace where the wire source is and the direction of the line. If you need to know where the wire / line is and where it's going, that's when you need the AC scan mode. I hope this information is helpful. Thank you.
Question:	Can this scan plastic pipe behind the concrete
Answer:	Sounds like bulk or non-retail packaging. Likely ok.
Question:	I have sheet rock mounted on furring strips against a concrete block walls. Will this stud finder Zircon 70 locate the furring strips
Answer:	Hi. Zircon stud finders and multiscanners are optimized for standard interior drywall construction. Other interior surfaces can be penetrated with our scanners, but brick, slate, and rock type material are too dense. Thanks.

Product features

Zircon StudSensor 70

The Zircon StudSensor 70 is a handheld tool dedicated to quickly and easily find studs and joists behind walls, floors, and ceilings while alerting you of live AC wiring. The SS 70 comes equipped with 2 scanning modes: StudScan and DeepScan Features include:

Functions Include:

StudScan and DeepScan - Center and Edge Finding Stud Finding Mode

The SS 70's StudScan and DeepScan modes locate the edges and center of wood and metal studs and joists behind walls, floors and ceilings.

StudScan finds shallower wood or metal studs up to .75 of an inch (19 mm) deep while DeepScan doubles the scanning depth to 1.5 inches (38 mm).

Make sure to note whether the WireWarning Detection is alerting to live, unshielded AC wiring before drilling into the center of the stud.

WireWarning Detection

WireWarning Detection is a feature that is always on while you are scanning in StudScan and DeepScan modes. It alerts you to the presence of live, unshielded, electrical AC wires up to 2 inches (50 cm) deep. The WireWarning LED illuminates when the SS70 detects live AC voltage. If scanning begins over a live AC electrical wire, the WireWarning LED flashes continuously.

Note: Please turn off the electricity and use extreme caution in areas where live AC voltage is detected before nailing or drilling.

Integrated Wall Marker

The SS 70's integrated erasable marker allows easy, one-handed operation.

When the target is found, simply push down on the 'mark' button. The pencil marks the surface without interrupting the scan.

The SS 70 comes with a pencil pre-installed, and refills in the box.

Frequently Asked Questions

Question: Does the stud finder need to be calibrated?

Answer: Yes the StudSensor 70 needs to calibrate to the surface before scanning. Calibrating the stud finder on an empty wall gives the device a chance to measure the wall thickness and material density, as well as register factors like humidity, temperature, and even the minor electric readings from your hand, which all have an impact on the readings from the wall.

Question: How can I be certain the objects found behind my wall are studs in DeepScan mode?

Answer: DeepScan mode has increased sensitivity so you may have located something other than a stud. Studs are equally spaced to either side (12, 16, or 24 in. apart) and typically run from floor to ceiling.

Question: What is Auto Correcting Technology (ACT)?

Answer: Auto Correcting Technology (ACT) is a feature that enables the tool to automatically adjust for common calibration errors. It checks calibration 10 times per second and automatically recalibrates when/if needed.

• Four Scanning Modes. VIVREAL stud finder provides four scanning modes. Depending on the tasks you have, you can switch to the desired mode. Stud scan mode is used for finding and locating the center and edges of wood or metal studs up to 3/4 in (19mm) deep. Deep mode can scan walls for 1.5 in (38mm) deep/ Metal scan is used for for locating and detecting metal up to 2.25 in (60mm) deep. AC scan can locate live AC wires up to 2 in (51mm) deep.
• Graphical LCD Display. This wall scanner beam finder has a large graphical LCD, which indicates many cues in detection, such as detection mode, signal strength, automatic calibration, battery indication with maximum readability. The low battery indicator icon displays when the battery level is getting low, reminding you to replace a brand new 9-volt battery in time. For transportation safety reasons, the stud finder does not contain the battery.
• Sound Warning. VIVREAL stud finder is equipped with the beep signal alert. When you have detected an object with the wall scanner, it will beep continually. The sound warning together with the LCD screen helps detect the accurate location of the objects. Then a peck shape will display on the graphical screen.
• Auto Calibration. The stud finder wall scanner would automatically calibrate when it is turned on. Please kindly noted that the calibration needs to be done by holding the stud finder on the wall where there are no wood studs, AC wires or metal.
• Safe and Wide Use. VIVREAL stud finder wall scanner devotes to developing a reliable stud finder and helping you to detect the edge and center of the wooden and metal studs, and live wires quickly and easily.

User questions & answers

Question:	I have metal plates covering some of my electrical wires can it still detect the electrical wires or will it confuse the instrument
Answer:	I have tried using this sensor on second floor thick carpet and had no luck locating joists. Great on sheetrock walls though. I don't think that there is any sensor that will pick up joists through carpet and plywood.
Question:	Does this require a cell phone
Answer:	Detect studs behind plaster? Yes!! In my 1930's lath-and-plaster house, it reliably detects studs - to my great relief after making about 12 useless test holes based on the readings of a Zircon stud-finder. This does not have wire-tracing at all, though, but there are other devices (dedicated and also combined with stud-finding, I believe) that do.
Question:	Can this find me a girlfriend
Answer:	no this sensor does not tell you where the ac runs are in the wall.
Question:	I lost my instruction manual, is there a way to get a digital copy
Answer:	Can't speak to stucco, but put it on my wood siding and it doesn't locate the wood stud behind it. Probably makes sense that it doesn't locate wood behind wood.

Product description

Whether you’re hanging a picture, mounting a TV, renovating part of your home, or working as a professional contractor, you need to know what is on the other side. Our stud finder is one of those tools that you will eventually need. PERLESMITH stud finder can help you finish your DIY home project well. The wall detector features large LCD display, ergonomic design and multi-sense technology for accurate detection of both metal and wooden studs. It will also detect live wiring up to two inches into walls and metal up to 2.36 inches deep. The five scanning modes (1/2” stud scan, 1” stud scan, 1.5” stud scan, metal scan & AC scan) make it ideal for both tradesmen and home carpenters. With this device, you can immediately find a suitable place on the wall without making any extra holes

There are two tips to ensure the wall scanner never trick you again

1. Go slowly: To be effective, stud finders need to be properly calibrated. First, place yours on the wall and turn it on — you can usually do this by holding in a button. Let the stud finder read the density of the material (this will only take a second or two and you will hear the sound of " beep"), then slowly move it from side to side. Go back and forth over the wall a few times, starting from a different spot with each pass. Mark each stud you discover with a pencil. We recommend finding three and using a tape measure to make sure they are the same distance apart. This will help you avoid false positives.

2. Always double-check: After you have marked your studs and where you want to drill your holes, you should use something to poke into the wall to ensure you actually marked a stud. We would recommend doing this by hand, rather than using a power tool, as you will have a better feel for what’s inside the wall. You can also tap a small nail into the wall; get past the drywall without the nail “falling in” and you’ve found a stud.

• 🔨 Upgraded 5 in 1 Stud Finder Wall Detector: wall scanner wood stud finder features 5 scanning modes respectively. Includes 1/2” stud scan, 1” stud scan, 1.5” stud scan, metal scan & AC scan. Helps you quickly & easily locate wood, metal studs, joists, beams, metal pipes, rebar & live AC wire behind walls, floors, ceilings
• 🔨 Clear LCD Display & Sound Warning: stud detector features a large LCD display & the beeping sound to help you get a more accurate result in both visible and audible way. Saves you lots of time by displaying the desired stud center & the precise position of the stud
• 🔨 To Be DIYer: our wall stud finder sensor is lightweight, long-lasting and convenient can be applied to various wall surfaces, from lath, wallpaper wood flooring, painted walls, acoustic ceiling, etc. Makes all of your DIY home projects easier such as mounting your TV, bathroom cabinet, photo frame, garage racks etc.
• 🔨 Comfortable Ergonomic Design: the ergonomic design means you can hold the wall scanner in your hand comfortably. Strong grip let you hold the electric stud finder tightly & keep it moving correctly to get more accurate results. Suitable for all types of people
• 🔨 Automatic Calibration & Simple Use: Just press the scan button to start calibrate and it will complete the moment the BEEP sound and screen shows disappear. Calibration before using provides users with maximum reliability & accuracy. If you have any questions in the process of using, feel free let us know

User questions & answers

Question:	Does it work on plaster walls
Answer:	No. This model does not detect electrical wiring. I don't think Franklin has a model for detecting electrical current. However it is the best I have found that can detect wall studs accurately.
Question:	Does this work on ceilings
Answer:	Hello, Sadly, the T6 is not capable of sensing through tile.
Question:	Where is this made
Answer:	Hello, Yes, it tends to be even more accurate with metal studs. Our stud finders sense density, and since metal is more dense than wood, the reading will tend to be more accurate on metal studs. Thank you for your inquiry. Best regards, The Franklin Sensors Team

• 🌟 5 in 1 DEEP DETECTION FUNCTION: our wall scanner wood stud finder features 5 scanning modes respectively. Includes 1/2” stud scan, 1” stud scan, 1.5” stud scan, metal scan & AC scan. Helps you quickly & easily locate wood, metal studs, joists, beams, metal pipes, rebar & live AC wire behind walls, floors, ceilings
• 🌟 HELPFUL LCD DISPLAY & SOUND WARNING: this wall detector features a large LCD display & sound warning to help detect the accurate location of the objects. Saves you lots of time by displaying the desired stud center & the precise position of the stud
• 🌟 HIGHLY COMPATIBLE: our wall stud finder sensor is lightweight, long-lasting and convenient to use in your home, office, workshop. Makes all of your DIY home projects easier such as mounting your TV, bathroom cabinet, photo frame, garage racks etc.
• 🌟 AUTOMATIC CALIBRATION AND SIMPLE USE: turn on the stud finder and complete calibration by placing it on the wall. The finder will flash and beep once it has picked up the edge of a stud. Automatic calibration before using provides users with maximum reliability & accuracy
• 🌟 COMFORTABLE ERGONOMIC DESIGN: the ergonomic design means you can hold the wall scanner in your hand comfortably. Strong grip let’s you hold the electric stud finder tightly & keep it moving correctly to get more accurate results. Suitable for all types of people

User questions & answers

Question:	Is it hard to use
Answer:	Si.
Question:	Does it detect the pvc pipe on concrete wall
Answer:	I could not find one or a manual that could help determine this.
Question:	How long is the warranty period
Answer:	I must have a defective unit because I cannot switch between meters in inches… It will not work must have a defective item
Question:	Will it make sound when it finds stud
Answer:	I have tried this on my construction site where there is various stuff in the way. In direct sunlight, it will be accurate up to about 50’. After that, the laser can be barely seen. In the dark though, you can get to 300’ easy with good accuracy.

Product features

STUD SCAN AND DEEP SCAN

Use Stud Scan Mode to find the center and edge of wood or metal studs up to 1.5 in. (38 mm) deep.

In order to get the accurate results, please always start in Stud Scan Mode when looking for studs.

METAL SCAN

Wall scanner will detect metal up to 2.36 in. (60 mm) deep.

Use this Metal Scan Mode to locate and avoid hazards, such as pipes, behind walls and determine if a stud is wood or metal.

For maximum accuracy, press and hold the Power Button while holding the scanner away from the surface. Once a short beep sounds confirming calibration complete, place against the surface to be scanned. Make sure to continue to hold the Power Button.

AC WIRE SCAN

Wire Warning detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51 mm) deep.

For Safety, in all modes, this wall scanner always detect and indicate the Live AC Wire.

Note: WireWarning Detection works in both StudScan / DeepScan / MetalScan Modes. The WireWarning Detection Icon will show when live, unshielded wires are detected.

• 🌻 5 IN 1 MULTIPLICATION SCANNING MODES: This stud finder provides five different scanning modes, includes 1/2” stud scan, 1” stud scan, 1.5” stud scan, metal scan & AC scan, which can help us quickly locate wood, metal studs, joists, beams metal pipes, rebar, AC wire and deeply embedded objects behind floor, ceiling, wall
• 🌻AUTOMATIC CALIBRATION AND DETECTION: It can be automatically calibrated by turning on the wall scanner and placing it on the wall before use, which can provide accuracy and reliability for the subsequent detection. When you put it on the wall, the stud finder will beep once it has finished calibration. So you can use this wall detector with confidence
• 🌻 LCD DISPLAY & AUDIO ALARM: Our stud finder has an LCD display screen, you can clearly know the position of the object when using it, and it also has an audio alarm, once you detect it, the wall detector will have a loud warning to remind you when you find the center of the object
• 🌻 HIGHLY COMPATIBLE: our wall stud finder sensor is lightweight, long-lasting and convenient to use in your home, office, workshop. Makes all of your DIY home projects easier such as mounting your TV, bathroom cabinet, photo frame, garage racks etc.
• 🌻 COMFORTABLE & Considerate Design: This wall scanner includes a 9V battery, which allows you to use it immediately after receiving and needn’t rush to the store to purchase a battery. We also design strong grip at the two edges for the hands use part, which can make you more comfortable using this stud finder

Product features

AC WIRE SCAN MODE

AC scan mode can detects live AC wires up to 2 in. (51 mm) from the scanned surface, in concrete, encased in conduit, present behind a plywood shear wall or metallic wall covering.

Note: AC Scan will only detect live (hot) unshielded AC wiring.

METAL SCAN MODE

Use metal scan mode to locate the metal studs/pipes/ rebar max up to 2.36 in. (60 mm) deep in walls, floors, and ceilings.

Note: When scanning for studs, use Stud 1⁄2 in. scan mode (or Stud 1 in., Stud 1½ in. scan mode on thicker walls) to quickly locate the center and edges.

STUD SCAN MODE

Use stud scan mode to find the studs center up to 1.5 in. (38 mm) deep.

For optimum scanning results, it is important to press and hold the Power Button while holding the scanner away from the surface. Once a short beep sounds confirming calibration complete, place against the surface to be scanned.

• Complete with the Latest Technology & More Accurate than Standard Stud Finders- MERECE stud finder wall scanner is launched after testing and upgrades for years. This wall detector adopts the most Advance Sensors Technology for accurately & quickly locating studs wood metal AC wires! In all modes, this wall scanner always detect and indicate the Live AC Wire. Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in this electronic stud scanner
• 5 SCANNING MODES UP TO 60MM DEPTH - Merece stud locator has mufti-fuctions and can quickly and easily locates wood metal studs joists beams metal pipe rebar and live AC wire behind walls, floors, and ceilings. StudScan Mode scans through one layer of drywall up to 0.5 in.（12mm) and 1 in . (25mm) thick. DeepScan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. Deep Stud Scan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard
• Upgrade Design of LCD Screen - Displaying the Desired Stud Material As Well As the Precise Position of the Stud - The Merece digital stud scanner features large LCD display together with the big sound to detect the accurate location of stud metal Ac wires. When find the material, the LCD display will indicate the direction and the intensity of sound tells whether you are more close to the target. The fast detection saves users time and efforts, making the task completion EASIER
• Automatic Calibration and Ergonomic Grip for Comfortable Use - Turning on the stud finder and Completing Calibration. The automatic calibration before using provides users with maximum reliability and accuracy. Then put it on the wall. The wood beam finder will flash once it has picked up the edge of a stud.The ergonomic design of this wall stud finder makes it comfortable to hold from any angle
• Professional Design with Top Quality - Merece has been dedicated to Research and develop stud finders for many years, and we have a professional team and mature productions process. This stud joist finder wall detector can quickly locate the metal wood AC wire that are hidden in the walls, floors and ceilings of your house, help you find the exact stud while installing TVs, cabinets, garage shelves etc.

User questions & answers

Question:	Will it work on a 2x4 corner stud
Answer:	when I first got the device I tested it and it found every stud (including a corner stud). I have been please with its performance.
Question:	has anyone used it to detect wires and pipes
Answer:	my husband only tried it on the studs, I will get him to try it on the wires and pipes and let you know what the results are.
Question:	Will this product find the location of floor joists through 3/4 inch plywood floor sheathing
Answer:	Yes it does
Question:	Where is this made
Answer:	It is made in China

• 📍【High-Precision Detector】 Quickly locate the stud wood metal AC wire. Wood measurement has two modes to detect depth to the greatest extent: precise mode (20 mm), depth mode: (38 mm); metal measurement mode, which can measure non-magnetic metals: (80 mm) and magnetic metal (100 mm); power cable Mode (40mm).
• 📍【2 in 1 Stud Finder Laser Distance 】 The new measuring device can not only measure metals (steel rods, copper pipes) and cables, wood, etc. hidden under walls, ceilings, floors and gypsum boards, but also measure laser ranging, area. Whether you are a professional, homeowner or DIY enthusiast, you can find great use in this stud scanner.
• 📍【Multi-Function Distance Meter】 This instrument uses laser precision technology as a distance meter, with an accuracy of ±5MM and a measurement distance of up to 40m; it can be freely switched between M / In / Ft; multiple measurement functions Range, distance, length, continuous measurement, Pythagorean method, and 30 sets of data storage functions.
• 📍【Energy Saving and Calibration Function】 The device has an automatic shutdown function. If there is no function within 20 seconds, it will automatically shut down. In addition, the device is powered by a lithium battery. We provide a USB charging cable that can be used multiple times; calibrating before use can provide you with maximum reliability and accuracy.
• 📍 【Mute Setting and LCD Backlight】 Large backlit screen can provide better visibility in dark areas. Using the mute function, you can turn the signal tone on or off as needed. Suitable for libraries, classrooms and other quiet places.

Product features

Locator Specifications

Wood (foreign body): 20 / 38MM

AC cable: 40MM

Non-magnetic metal: 80 MM

Magnetic metal: 100MM

USB charging

Wood Measurement

• Maximum detection depth: precision mode: 20 mm, depth mode: 38 mm. Press and hold the button in the center to switch to precision and depth scan modes.

• The foreign body detection mode detects objects in plasterboard walls, plywood, solid wood and coated wooden walls.

Metal Measurement

• Press the center button to turn on the detection function and press the right button to access the detection metal interface.

• Place the instrument on the surface of the detector and move the instrument left or right in the same direction. When the instrument gradually recognizes the metal object, the metal symbol * appears on the screen and gradually grows as the instrument approaches the metal object. At the same time, the loudspeaker reports "metal". When the instrument is closest to the metal, a central symbol appears on the display.

Power Cable Measurement

• Press the center button to turn on the detection function, then press the right button to access the metal detection interface.

• Place the instrument on the surface of the detector and move the instrument left and right in the same direction. When the instrument gradually recognizes the power cord, the * cord symbol appears on the screen and gradually increases as the instrument approaches the power cord.

Screen Declaration

A: Magnetic / non-magnetic

B: Depth

C: Central location

Single and Continuous Measurement

• Single measurement: Briefly press the "ON" button to switch on the device. The device automatically switches to the individual measurement interface of the laser and the loudspeaker sends the current measurement mode. Aim the laser at the target to be measured and press the button for single measurement. The measurement result is displayed in the main display area and the loudspeaker announces the current value

• Continuous measurement: Long press the "ON" key to enter the continuous measurement mode. The maximum value (Max) and the minimum value (Min) are displayed in the auxiliary display area.

Area Measurement

• Area measurement: Measure the area of a rectangle. Measure the length and width of the rectangle according to the screen mode. The results are displayed in the main display area.

Single Pythagorean Measurement

• Measure one hypotenuse side and the right angle side according to the Pythagorean theorem principle, and the instrument automatically calculates the length of the other right angle side that is displayed in the main display area. Note: When testing the Pythagorean method theorem, the two measurements mean that the reference point of the measurement must remain unchanged and the line between the two laser points and the three reference points must be a right-angled triangle, otherwise the calculation result differs significantly from the actual results.

Double Pythagorean Measurement

• Similar to the simple Pythagorean measurement, when measuring 2 hypotenuse edges and 1 right-hand edge, it must be ensured that the reference points of 3 measurements remain unchanged and the right-hand edge must be measured perpendicular to the target edge, otherwise the calculated results differ significantly from the actual ones Results.

Product description

There are two tips to ensure the wall scanner never trick you again

1. Go slowly: To be effective, stud finders need to be properly calibrated. First, place yours on the wall and turn it on — you can usually do this by holding in a button. Let the stud finder read the density of the material (this will only take a second or two and you will hear the sound of " beep"), then slowly move it from side to side. Go back and forth over the wall a few times, starting from a different spot with each pass. Mark each stud you discover with a pencil. We recommend finding three and using a tape measure to make sure they are the same distance apart. This will help you avoid false positives.

2. Always double-check: After you have marked your studs and where you want to drill your holes, you should use something to poke into the wall to ensure you actually marked a stud. We would recommend doing this by hand, rather than using a power tool, as you will have a better feel for what’s inside the wall. You can also tap a small nail into the wall; get past the drywall without the nail “falling in” and you’ve found a stud. The last thing you should do before drilling is poke a little hole to the left and right of where you want to drill and make sure you are still on the stud. This will ensure you are centered on a stud, and not just clipping its side (and possibly hitting electrical wiring).

• 🔨 5 in 1 DEEP DETECTION FUNCTION: our wall scanner wood stud finder features 5 scanning modes respectively. Includes 1/2” stud scan, 1” stud scan, 1.5” stud scan, metal scan & AC scan. Helps you quickly & easily locate wood, metal studs, joists, beams, metal pipes, rebar & live AC wire behind walls, floors, ceilings
• 🔨 HELPFUL LCD DISPLAY & SOUND WARNING: this wall detector features a large LCD display & sound warning to help detect the accurate location of the objects. Saves you lots of time by displaying the desired stud center & the precise position of the stud
• 🔨 HIGHLY COMPATIBLE: our wall stud finder sensor is lightweight, long-lasting and convenient to use in your home, office, workshop. Makes all of your DIY home projects easier such as mounting your TV, bathroom cabinet, photo frame, garage racks etc.
• 🔨 AUTOMATIC CALIBRATION AND SIMPLE USE: turn on the stud finder and complete calibration by placing it on the wall. The finder will flash and beep once it has picked up the edge of a stud. Automatic calibration before using provides users with maximum reliability & accuracy
• 🔨 COMFORTABLE ERGONOMIC DESIGN: the ergonomic design means you can hold the wall scanner in your hand comfortably. Strong grip let’s you hold the electric stud finder tightly & keep it moving correctly to get more accurate results. Suitable for all types of people

User questions & answers

Question:	Can I use this wall detector to check the metal studs
Answer:	Thanks for your question. Yes, this stud finder wall scanner can easy locate metal studs on your wall. If you have any other questions, please feel free to contact us: [email protected]
Question:	I want to find stud behind the wall, is it hard to use
Answer:	Thanks for your question. Our wall scanner wood stud finder has 5 scanning modes . Includes 1/2” stud scan, 1” stud scan, 1.5” stud scan, metal scan & AC scan. It can helps you quickly and easily locate wood, metal studs, joists, beams, metal pipes, rebar & live AC wire behind your walls. If you have any other questions, please feel free to contact us: [email protected]
Question:	Will this stud finder locate metal studs
Answer:	Thanks for your question. Yes, our wall scanner stud finder can help you easily locate metal studs behind your walls. If you have any other questions, please feel free to contact us: [email protected]
Question:	I want to install the TV wall mount, can I use this stud finder to locate wooden stud
Answer:	Thanks for your question. Yes, you can use this stud finder wall detector to locate wood studs in your wall. If you have any other questions, please feel free to contact us: [email protected]

Product features

5 IN 1 STUD FINDER WALL SCANNER - MAKE YOUR DIY HOME PROJECTS EASIER

Step 1: Calibrate the device before every scan

After choose the mode, press and hold the scan button( on the side of the device) to calibrate this device. Wait for the reducing bars disappeared and beep to confirm calibration has completed.

In stud/deep mode, put it on the wall where you want to detect to calibrate it ;In AC/Metal mode, put it in the air to calibrate it.

Step 2: Move along the wall

Hold down the button, then move the stud finder along the wall slowly, if shake or lift the scanner accidently, the device needs to be re-calibrate.

The arrow on the screen will guide you to find the direction of the stud.

Step 3: Find the center of the stud

When the signal bar is full and the beep alarm is loudest, it means you have found the center of an object. Mark it with your pencil.

Then choose the Metal Scan mode to test whether it is a metal. After you confirm that it is not a metal, it means that you found the center of a stud. Then you can drill it to hang things.

STUD SCAN AND DEEP SCAN

Use Stud Scan Mode to find the center or metal studs up to 1.5 in. (38 mm) deep.

DeepScan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. To minimize false positives and/or finding other objects further behind the wall that may not be a stud.

In order to get the accurate results, please always start in Stud Scan Mode when looking for studs.

METAL SCAN

Wall scanner will detect metal up to 2.36 in. (60 mm) deep.

Use this Metal Scan Mode to locate and avoid hazards, such as pipes, behind walls and determine if a stud is wood or metal.

For maximum accuracy, press and hold the Power Button while holding the scanner away from the surface. Once a short beep sounds confirming calibration complete, place against the surface to be scanned. Make sure to continue to hold the Power Button.

AC WIRE SCAN

Wire Warning detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51 mm) deep.

For Safety, in all modes, this wall scanner always detect and indicate the Live AC Wire.

Note: WireWarning Detection works in both StudScan / DeepScan / MetalScan Modes. The WireWarning Detection Icon will show when live, unshielded wires are detected.

Product description

The Stud Finder -- for Easier DIY Projects Done

Whether you’re trying to hang a painting or mounting a TV in your living room, installinging a pair of shelves in your laundry room, or taking on a serious renovation or demolition project, having a dependable stud finder is going to make the task drastically more manageable.

Features

Detects wood, metal and electric wires & cables.

With a stud finder, you’ll be able to find studs easily without having to play any guessing games.

5 Modes Scanning

Detects wooden beams or joists at 13mm, 25mm and up to 38mm depth.

Detects metal studs, pipes, rebar, aluminum and copper up to 60mm depth.

Detects living electricl wires up to 51mm depth.

Center locating

This is a feature that you really only see in more advanced electronic scanners. Essentially, it'll allow you to determine the center point of the stud through scanning, rather than having to perform your own calculations and hope that the stud size correlates to standard conventions.

Digital display

Features with a digital display that indicates when a stud has been detected, while the altering system will help your confirm the center of the objects being detected.

PACKAGE CONTENT: 

1 * Stud finder 

1 * User manual 

1 * 9V battery 

• 【Accurate and Fast Location】-stud detector wall scanner adopt 2019 Upgraded intelligent micro-sensor chip which can precisely and quickly find edges and center of metal, studs, joists, pipes, live AC wire behind walls, floors and ceilings.Whether you are a professional, homeowner or a DIY enthusiast,this electronic stud scanner 5 in 1 is a Must Have Device that you Never Knew You Needed!
• 【5 in 1 Multifunctional Plus Deep Detection】-This stud sensor included 5 different scanning modes. 1/2 inch scan mode locates the center and edges of wood and metal studs up to 1/2 inch deep.Medium scan locates the center and edges of wood and metal studs up to 1 inch deep.Deep scan locates the center and edges of wood and metal studs up to 1.5inch deep; Metal scan detects metal (Ferrous and Non-Ferrous Metal) up to 2.36 inch deep; AC scan detects live unshielded AC wires up to 2 inch deep.
• 【Simple to Use&Auto Calibration】-Bright, Easy-to-read LCD display and ergonomic anti-slip handle make detecting the target on the wall easily and conveniently. The wall detector can be automatically calibrated anywhere on the wall to successfully find the center of studs very efficiently. This function provides maximum reliability to the user, greatly reduces errors in the application, and ensuring that most objects behind the wall can be detected.
• 【Digital LCD Display & Audio Alarm】-The wall stud locator has large LCD display together with the big sound warning to detect the accurate location of the objects. When find the target, the LCD display will indicate the direction and the intensity of beeping tells whether you are more close to the target. The fast detection saves users time and efforts, making the task completion EASIER and SAFER.
• 【Wide Use and 24-Month】-The beam finder is the handheld devices widely used for home improvement projects. This electronic stud finder quickly locates wood, metal and AC wires hidden in the walls, floors,lathe and ceilings of the house. It can work on different wall surfaces, such as lath, wallpaper wood flooring, acoustic ceiling,plaster wall,drywall etc,save you to have a potential accident when installing TVs, cabinets, garage racks, etc.

User questions & answers

Question:	What type of battery does this wall scanner use? And is the battery included
Answer:	Dear customer, thanks for your question. The stud finder can scan through the plaster(about 3/4 inch).
Question:	Can it detect floor joists
Answer:	Dear customer, thanks for your question. The stud finder can scan through the plaster(about 3/4 inch).
Question:	Will this tool detect the location and number of plastic water lines that may or may not be behind a wall
Answer:	No, it calibrated just fine and would find studs as well. my other stud finder verified it. The problem is the battery compartment cover is cheaply made and pops off. I wrapped the damn thing with packing tape and used it anyway.
Question:	Can this device distinguish between metal studs and wood studs
Answer:	Absolutely NOT! Please note that General Tool is a completely different company offering high quality precision tools for a reasonable price.