10 best cable and stud detector

• 📍【High-Precision Detector】 Quickly locate the stud wood metal AC wire. Wood measurement has two modes to detect depth to the greatest extent: precise mode (20 mm), depth mode: (38 mm); metal measurement mode, which can measure non-magnetic metals: (80 mm) and magnetic metal (100 mm); power cable Mode (40mm).
• 📍【2 in 1 Stud Finder Laser Distance 】 The new measuring device can not only measure metals (steel rods, copper pipes) and cables, wood, etc. hidden under walls, ceilings, floors and gypsum boards, but also measure laser ranging, area. Whether you are a professional, homeowner or DIY enthusiast, you can find great use in this stud scanner.
• 📍【Multi-Function Distance Meter】 This instrument uses laser precision technology as a distance meter, with an accuracy of ±5MM and a measurement distance of up to 40m; it can be freely switched between M / In / Ft; multiple measurement functions Range, distance, length, continuous measurement, Pythagorean method, and 30 sets of data storage functions.
• 📍【Energy Saving and Calibration Function】 The device has an automatic shutdown function. If there is no function within 20 seconds, it will automatically shut down. In addition, the device is powered by a lithium battery. We provide a USB charging cable that can be used multiple times; calibrating before use can provide you with maximum reliability and accuracy.
• 📍 【Mute Setting and LCD Backlight】 Large backlit screen can provide better visibility in dark areas. Using the mute function, you can turn the signal tone on or off as needed. Suitable for libraries, classrooms and other quiet places.

Product features

Locator Specifications

Wood (foreign body): 20 / 38MM

AC cable: 40MM

Non-magnetic metal: 80 MM

Magnetic metal: 100MM

USB charging

Wood Measurement

• Maximum detection depth: precision mode: 20 mm, depth mode: 38 mm. Press and hold the button in the center to switch to precision and depth scan modes.

• The foreign body detection mode detects objects in plasterboard walls, plywood, solid wood and coated wooden walls.

Metal Measurement

• Press the center button to turn on the detection function and press the right button to access the detection metal interface.

• Place the instrument on the surface of the detector and move the instrument left or right in the same direction. When the instrument gradually recognizes the metal object, the metal symbol * appears on the screen and gradually grows as the instrument approaches the metal object. At the same time, the loudspeaker reports "metal". When the instrument is closest to the metal, a central symbol appears on the display.

Power Cable Measurement

• Press the center button to turn on the detection function, then press the right button to access the metal detection interface.

• Place the instrument on the surface of the detector and move the instrument left and right in the same direction. When the instrument gradually recognizes the power cord, the * cord symbol appears on the screen and gradually increases as the instrument approaches the power cord.

Screen Declaration

A: Magnetic / non-magnetic

B: Depth

C: Central location

Single and Continuous Measurement

• Single measurement: Briefly press the "ON" button to switch on the device. The device automatically switches to the individual measurement interface of the laser and the loudspeaker sends the current measurement mode. Aim the laser at the target to be measured and press the button for single measurement. The measurement result is displayed in the main display area and the loudspeaker announces the current value

• Continuous measurement: Long press the "ON" key to enter the continuous measurement mode. The maximum value (Max) and the minimum value (Min) are displayed in the auxiliary display area.

Area Measurement

• Area measurement: Measure the area of a rectangle. Measure the length and width of the rectangle according to the screen mode. The results are displayed in the main display area.

Single Pythagorean Measurement

• Measure one hypotenuse side and the right angle side according to the Pythagorean theorem principle, and the instrument automatically calculates the length of the other right angle side that is displayed in the main display area. Note: When testing the Pythagorean method theorem, the two measurements mean that the reference point of the measurement must remain unchanged and the line between the two laser points and the three reference points must be a right-angled triangle, otherwise the calculation result differs significantly from the actual results.

Double Pythagorean Measurement

• Similar to the simple Pythagorean measurement, when measuring 2 hypotenuse edges and 1 right-hand edge, it must be ensured that the reference points of 3 measurements remain unchanged and the right-hand edge must be measured perpendicular to the target edge, otherwise the calculated results differ significantly from the actual ones Results.

Product description

Description:



This Professional wall detector can be used to detect metal, wood and AC cable hidden in the wall. It is a must for house decoration or refurbishment.



 



Specifications:



Model: UT387



Maximum Detection Depth:



Ferrous Metal( iron pipe with a minimum diameter of 3cm): 80mm



Nonferrous Metal(aluminum with a minimum volume of 30*2*2cm):80mm



Live Wire: 50mm



Wood(with a minimum volume of 20*16*4cm): 20mm



Operating Temperature: 0℃~40℃



Storage Temperature: -10℃~50℃



Temperature for Guaranteed Precision: 18~28℃



Humidity: ≤75%



Altitude: ≤2000m



Power Supply: 1 * 9V Battery(Not Included)



Product Size(appr.): 220 * 83 * 35mm / 8.7 * 3.3 * 1.4"



Package Weight(appr.): 340g



 



Package Included:



1 * Wall Detector



1 * Carrying Bag



1 * User Manual



 



Note:



Do not clean the meter with detergents or other chemicals.

• 【Professional Function】- Professional wall detector can be used to detect metal, wood and AC cable hidden in the wall.
• 【How to Use】- Keep the instrument close to the wall and slowly move it. When it has detected metal, wood or AC cable, it will display the signal strength and beep.
• 【Precise Positioning】- According to signal strength, you can judge the exact location of the materials which can avoid drilling failure.
• 【Range of Detecting Parameters】- The detector can detect an AC cable with a voltage higher than 110V, 50-60Hz, the sensibility may be weak when the cable is grounded.
• 【Practical Design】- High accuracy, with a maximum detection depth of 80mm. The key is helpful to detect small things or things buried in deep. Portable size with carrying bay, convenient to use and great for storage.

User questions & answers

Question:	Is there a way to tell what object is detected? AC wires as opposed to metal or wood
Answer:	Yes it let's you know what it detects through different colored lights
Question:	Hello. Does this detect electric wiring too? Thank you
Answer:	Hello, you are welcome. Electric wiring can be detected by this unit. Moreover, Wooden beam and metal can be detected too. Enjoy!
Question:	Will this work on Rome wiring in the walls
Answer:	Hello, we think it can work well on Rome wiring in the walls, the shape of wiring or materials of wall won't influence it's performance, but you need to pay attention to it's work range and depth, there are details showed on description page, please check it. Thank you.
Question:	I have a 1912 lathe and plaster craftsman house will I be able to find the beams to hang large artwork on the walls? And will this be difficult
Answer:	Yes you will, our house was built in 1901, and it detected everything through the lathe and plaster.

• GREAT ACCURACY AND CONSISTENCY - Tavool stud finder is professionally designed! Tavool stud finders uses the UPGRADE INTERNAL SENSORS. It senses a change in density in the space behind the wall and locates the stud center with GREAT ACCURACY. In additions. The shape of this wall scanner also shows the edges of the stud. The center of a stud is the most secure location when mounting anything heavy. The edges help you to recheck the locations. Take it home, makes your DIY homework easier!
• 5 SCANNING MODES UP TO 60MM DEPTH - Tavool stud locator has mufti-fuctions and can quickly and easily locates wood metal studs joists beams metal pipe rebar and live AC wire behind walls, floors, and ceilings. StudScan Mode scans through one layer of drywall up to 0.5 in.（12mm) and 1 in . (25mm) thick. DeepScan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. Deep Stud Scan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard
• WIRE WSRNNING INDICATOR, NO FEAR OF DRILLING INTO A LIVE WIRE - WireWarning Detection is up to 2 in.(51mm) deep. The added bonus is that the wire warning is ALWAYS ON while you are scanning in StudScan/DeepScan/MetalScan Modes, to alert you to the presence of live, unshielded electrical AC wires up to 2 in. (50 mm) deep, which helps you avoid drilling or hammering into a water pipe or electrical wire.Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in it
• EASY TO READLCD DISPLAY +SOULD WARNING HELPS FIND STUD CENTER AND STUD DEGES EASILY - Displaying the Desired Stud Center As Well As the Precise Position of the Stud - The Tavool digital stud detector features large LCD display together with the big sound warning to detect the accurate location of the objects. When find the material, the LCD display will indicate the direction and the intensity of beeping tells whether you are more close to the target. The fast detection saves users time greatly
• WHY RECOMMEND TAVOOL STUD FINDER TO YOU: Tavool has been dedicated to Research and develop stud finders for many years, and we have a professional team and mature productions process. Tavool stud finder not only gives you top quality and great accuracy, but also provide muti-functions to meet your practical needs on drywall, lathe wall, ceiling, plasterboard wall, wallboard etc.

Product features

Stud Scan Detection

This stud locator has 3 stud scan modes. Deep Scan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. DeepScan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. To minimize false positives and/or finding other objects further behind the wall that may not be a stud, always start your scan in StudScan Mode first.

Metal Scan Detection

Tavool wall canner will locate metal studs in StudScan, DeepScan, and Metal Scan Modes. Since Tavool stud finders are looking for a change in density behind drywall, not a particular material, in StudScan and DeepScan Modes the detector will react to metal studs the same as it would for wooden studs.

After you detect the center of a object, Please Use Metal Scan to determine if the previous reading in Stud scan was a wood stud, metal stud, or pipe.

Wire Warning Detection

Wire Warning detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51 mm) deep. For Safety, in all modes, this wall scanner always detect and indicate the Live AC Wire.

Note: WireWarning Detection works in both StudScan / DeepScan / MetalScan Modes. The WireWarning Detection Icon will flash when live, unshielded wires are detected.

Step 1:Calibrate the tool before every scan

After choose the mode, press and hold the scan button( on the side of the tool) to calibrate this tool. Wait for the reducing bars disappeared and beep to confirm calibration has completed.

In stud/deep mode, put it on the wall where you want to detect to calibrate it ;In AC/Metal mode, put it in the air to calibrate it.

Step 2: Scan the wall

Hold down the button, then move the stud finder along the wall slowly, if shake or lift the scanner accidently, the device needs to be re-calibrate.

The narrow on the screen togather with the beep signal alter, guides you to find the location of the stud.

Step 3: Find the location of the stud

When the signal bar is full and the beep alarm is loudest, it means you have found the center of an object.Mark it with your pencil.

Then choose the Metal Scan mode to test whether it is a metal. After you confirm that it is not a metal, it means that you found the center of a stud. (More details refer to the above description of "Metal Scan Detection")Then you can drill it to hang thing

Product description

RISEPRO Stud Finder – Your DIY Projects Helping Device

This RISEPRO stud finder is your best choice for locating the studs/metal/ac wires preciously and quickly! It is commonly used on finding studs on drywalls, plaster wall, finding the beams in the ceiling, floor, locating metal behind walls or other surfaces, even locating metal/screws behind tiles.

Features:

Detects wood, metal and electric wires & cables.

With a stud finder, you’ll be able to find studs easily without having to play any guessing games.

5 Modes Scanning

Detects wooden beams or joists at 13mm, 25mm and up to 38mm depth.

Detects metal studs, pipes, rebar, aluminum and copper up to 60mm depth.

Detects living electrical wires up to 51mm depth.

Center locating

This is a feature that you really only see in more advanced electronic scanners. Essentially, it'll allow you to determine the center point of the stud through scanning, rather than having to perform your own calculations and hope that the stud size correlates to standard conventions.

Digital display

Features with a digital display that indicates when a stud has been detected, while the altering system will help your confirm the center of the objects being detected.

One Set Included:

1 * Stud finder

1 * User manual

1 * 9V battery

Color packaging box

• HIGH ACCURACY & FAST LOCATION – This RISEPRO stud detector uses the upgraded intelligent micro-sensor chip which can precisely and quickly find edges and center of metal, studs, joists, pipes, live AC wire behind walls, floors and ceilings. It makes DIY homework and professional uses a lot easier.
• 5 IN 1 MULTIFUNCTIONAL, DEEP DETECTION - This stud locator included 5 different scanning modes. 1/2” scan mode locates the center and edges of wood and metal studs up to 1/2” deep. Medium scan locates the center and edges of wood and metal studs up to 1” deep. Deep scan locates the center and edges of wood and metal studs up to 1.5” deep; Metal scan detects metal (Ferrous and Non-Ferrous Metal) up to 2.36” deep; AC scan detects live unshielded AC wires up to 2” deep.
• EASY TO USE W/ AUTO CALIBRATION – The bright, easy-to-read, large LCD display and ergonomic anti-slip handle make detecting target on the wall easily and conveniently. The wall detector can be automatically calibrated anywhere on the wall to successfully find the center of studs so efficiently. This good feature provides maximum reliability to the users, highly reduces errors in the applications, and ensures that most objects behind the wall can be well detected.
• EASY TO READ DIGITAL LCD DISPLAY & AUDIO ALARM - This wall stud locator has large LCD display together with the big sound warning to detect the accurate location of the objects. When finding the target, the LCD display will indicate the direction and the intensity of beeping tells whether you are more close to the target. The fast detection saves users much time and efforts, gets the tasks done EASIER and SAFER.
• WIDE APPLICATIONS - This finder is very handy which can be widely used for home improvement projects, DIY homework, industrial and professional purposes. And it meets your practical needs on drywalls, lathe walls, ceilings, floors, plasterboard walls, wallboards etc.

Product features

RISEPRO Stud Finder – Your DIY Projects Helping Device

This RISEPRO stud finder is your best choice for locating the studs/metal/ac wires preciously and quickly! It is commonly used on finding studs on drywalls, plaster wall, finding the beams in the ceiling, floor, locating metal behind walls or other surfaces, even locating metal/screws behind tiles.

Main Features:

• Easy to Read Digital display & Audio Alarm - Features with a digital display that indicates when a stud has been detected. When finding the target, the LCD display will indicate the direction and the intensity of beeping tells whether you are more close to the target. The fast detection saves users much time and efforts, gets the tasks done EASIER and SAFER.
• Center locating - This is a feature that you really only see in more advanced electronic scanners. Essentially, it'll allow you to determine the center point of the stud through scanning, rather than having to perform your own calculations and hope that the stud size correlates to standard conventions.
• Wide Applications - This finder is very handy which can be widely used for home improvement projects, DIY homework, industrial and professional purposes. And it meets your practical needs on drywalls, lathe walls, ceilings, floors, plasterboard walls, wallboards etc.

5 Modes Scanning

> Detects wooden beams or joists at:

• 13mm,
• 25mm
• up to 38mm depth

> Detects metal studs, pipes, rebar, aluminum and copper up to 60mm depth.

> Detects living electrical wires up to 51mm depth.

Product description

Depth range

Magnetic metal : 8cm

Non-magnetic metal : 5cm

AC Cable:5cm

Wood : 2cm

Units:CM/inch

Live detection:50/60 Hz AC

Auto shut off :300s

Auto backlight shut off:10s

Protection class:IP65

Battery type:3xAAA Battery(not include)

Working hours:≥7.5h

Three color indicator light：If there is no metal near the sensing area, the green light will be on，When approaching the metal object gradually and sensing the weak metal signal, the yellow light will be on，When close to metal objects, the metal signal is enhanced and the red light is on



Package Contents:

1 * Metal Detector

• ❤ Advanced sensors technology for accurately and quickly locates studs wood metal ac wires:A good stud finder detector needs to be Accurate. wall scanner is an electronic stud finder with multi-sense technology which can locate studs/wood/AC wires in multiple locations on your wall.
• ❤ 3 in 1 multifunction plus deep detection:The digital wall scanner includes four different scanning modes for woods, beam, joist, metals and AC wires.
• ❤ Easy to read： LCD Screen Displaying the Desired Stud Material As Well As the Precise Position of the Stud: The digital stud scanner features large LCD display together with the big sound warning to detect the accurate location of the objects. When find the material, the LCD display will indicate the direction and the intensity of beeping tells whether you are more close to the target.
• ❤ AUtomatic calibration and simple use :Turning on the stud finder and Completing calibration by placing the wood beam finder on the wall when the BEEP sound and screen shows disappear. The automatic calibration before using provides users with maximum reliability and accuracy.
• ❤ Ergonomic grip for comfortable use:The ergonomic design of this wall stud finder makes it comfortable to hold from any angle.

Product description

Specifications:

Model: TH403

Color: Grey

Shell Material: ABS

Power Supply: 6F22 9V battery (Not included)

Measuring Range: 13-60MM

Measurement Accuracy: 13-60MM

Operating Temperature: 0℃-40℃

Item Weight: 168g / 5.92oz

Item Size: 164*75*34mm / 6.45*2.95*1.33in

Package Weight: 233g / 8.21oz

Package Size: 185*85*45mm / 7.28*3.34*1.77in



Note:

Metal detector only, other accessories in the picture are not included.

Due to manual measurement, there may be deviation.

Due to lighting, the picture and material object may slightly differ in color, please in kind prevail. 



Packing List: 

1 * Metal Detector 

1 * User Manual

• 🛠 Quickly detect the center position of the wooden stem.
• 🛠 Digital LCD display, easy to read.
• 🛠 The center of the wooden stem can be detected, and the wall thickness is 1/2 inch (13 mm).
• 🛠 Detectable wood stem center with a wall thickness of 1 inch (25 mm).
• 🛠 Detectable wood stem center with wall thickness of 1 1/2 inches (38 mm).

Product description

Specification:

Condition: 100% Brand New

Model: TH250

Material: ABS

Working current: <50mA

Standby current: <1uA

Working temperature: -20~ + 50℃

Storage temperature: -20~ + 50℃

Power supply: 1 * 6F22 9V battery (not included)

Weight: Approx. 191g / 6.7oz

Size: Approx. 170 * 78 * 36mm / 6.7 * 3.1 * 1.4in

 

Package List:

1 * Wall Detector

• A Great Stud Finder - Advanced multi-sense sensor technology for accurate and quick locating studs wood metal & AC wires. You will find great use in this electronic stud scanner no matter you are a professional, homeowner or a DIY enthusiast.
• LCD with Backlight Display - Large LCD digital display with green backlight and sound signal indication, also with low battery indication.
• 4 Detecting Modes - During the stud sensor mode, it can locate the the edges of wood or metal studs up to 0.75" (19mm), deep wood or metal studs up to 3/2" (38mm), metal rebar up to 2.36"(60mm) and AC wire up to 2"(51mm).
• All detection functions have automatic correction function. Automatic shutdown time: when there is no operation button and no object is scanned, it will be shut down in about 3 minutes.
• Widely Application - Multi-scanner stud finder for Wood, Metal, Deep, AC Wire. Quickly locate edges and center of wood, wall studs, metal pipes, wooden joist, rebar behind walls, floors and ceilings, also indicates the presence of live AC wire.

• ★【5 in 1 Multi-Function Mode】Compared with other stud sensors, Meterk stud finder not only featuring detection for wood stud exact mode, wood stud deep mode, metal objects mode (iron and non-ferrous metals), copper conductors mode (live), but also detection for moisture in the wood and building materials, offering a wider range of detection performance
• ★【Locate the Center of Stud !】Meterk stud finder can be used to find the center of the stud in just once the operation. When the stud sensor is approaching the center of the stud, the signal strength will increase and accompany the sound. At the center, the center icon "+" will appears and the signal strength shows 100% full on the screen. However, other products need to be operated twice in the left and right direction to find the center by looking for the edge of the stud
• ★【Wood Exact/Deep Mode】Stud sensor can detect metal, wood and live cables in walls, ceilings, and floors. Wood exact mode scans through one layer of drywall up to 0.79 inches (20mm) thick. Deep mode scans through 2 layers of drywall up to 1.50 inch (38 mm) deep. Deep stud scan mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard
• ★【Convenient Design】Meterk sensor detector has a mute setting, which is very convenient for those who think that the alarm sound is annoying or use it somewhere in the library. This sensor detector has a large LCD display, the backlight function supports to detect studs even in dark environments. Whether you are a professional, a homeowner or a DIY enthusiast, you can find good uses in it
• ★【Make Your DIY Homework Easier !】 This wall detector quickly locates the center of the material, helping you avoid danger when installing TV, cabinets, garage racks, and more. The ability to measure the moisture content of wood and building materials can be of great help in wood processing, water damage repair, and home renovation. 1 x Meterk stud finder, 2 AAA battery, 1 x portable bag, 1 x user manual, 1 x warranty card( 24 month ).

User questions & answers

Question:	Can this detect roof rafters through roof shingles
Answer:	No dosent work
Question:	What is the moisture detection function
Answer:	It can detect moisture in wood and building materials and provide better service to more DIY workers.
Question:	How about the product warranty
Answer:	24-month warranty and you can contact them if stud detectors have quality problems occur during the warranty period.
Question:	What are the maximum depth of the metal tube and copper conductor
Answer:	copper conductors(live): 50mm /1.97 inch, ferrous metals: 60mm /2.36 inch, non-ferrous metals(copper): 50mm / 1.97 inch

Product features

Step 1

* Short press the power button on the Meterk stud sensor.

* Short press the wood detection mode button to enter the wood stud detection mode, the wood detection mode is the exact model.

* Long press this button to switch to the wood deep detection mode.

(The maximum detection depth of the "exact" mode is a 20mm/0.79 inch, and the maximum detection depth of the "deep" mode is 38mm/1.50 inch).

Step 2

* When the stud sensor starts to approach the stud, it will always be accompanied by a sound, the signal percentage scale on the right side of the screen will gradually increase, and the distance will be displayed on the screen will gradually shorten.

* When the positioning symbol "+" appears on the screen, indicating that the center of the stud has been found, mark it with the pen at the groove.

* Note! At this time, you cannot directly drill in the second step!

Step 3

* Since Meterk stud sensor is looking for a change in density behind drywall, not a particular material. In stud scan and deep scan modes the detector will react to metal studs the same as it would for wooden studs.

* To ensure that the object detected in the second step is a wood stud, switch to the metal mode for testing again. In the metal mode, if nothing happens on the screen, it means that the object found by the second step stud sensor is wood.

* At this time, you can rest assured and start your DIY and drilling work !

Metal / AC Wire Scan Detection - Avoid the Metal / Wire Behind the Wall for Punching

Step 1: When the Meterk stud sensor is close to the metal/wire, the display scale bar on the screen will gradually rise and make a sound, when the distance displayed on the screen becomes at 6cm, it means that the product has started to detect metal. At this time, it should be marked with a pen at this position, and the mark point is "1" (as shown).

Step 2: The stud sensor will continue to move from the marker point "1" position for a distance, and the distance displayed on the screen will be shortened. When the center icon "+" appears on the screen, it represents metal/ The wire is positioned just below the center of the stud sensor.

Step 3: When the instrument is slowly moving away from the object, the display scale will slowly drop and the distance displayed on the screen will become 6cm again. At this position, mark it again with the pen and mark it as “2” (as shown). .

Step 4: There is a metal/wire in the area formed between the marked points "1" and "2".

Note: Before starting the drilling work, you should avoid this area!

Moisture Measurement

• Meterk stud sensors measure the moisture of wood and building materials. If you need to freeze this value, just press the "HOLD" button.
• Wood moisture measurement range: 5%-50%/±2%, building materials: 1.5%-33%/±2%. (There are two test pins at the bottom of the instrument)

Mute Setting

• Press the 1 and 2 buttons at the same time tset the sound to mute. There for people who think the alarm sound is annoying or to use it in someplace like a library.

Make Your DIY Homework Easier!

• This wall detector quickly locates the center of the material, helping you avoid danger when installing TV, cabinets, garage racks, and more. The ability to measure the moisture content of wood and building materials can be of great help in wood processing, water damage repair, and home renovation.

Product description

This unit is an advanced detector. It can used to detect and locate stud, metal and AC voltage. It can be used in construction, fitment, carpentry, etc. FEATURES 1. Find the stud center 2. Find wood and metal studs 3. AC scanning to trace hot wire 4. Metal scanning for finding nail, pipe, rebar, and other hidden metallic object SPECIFICATIONS Detection depth *Stud mode : Wood stud of 30 x 30mm; ≤18mm *Metal mode: Iron pipe of 25mm; ≤30mm *AC mode: Typical depth of 50mm for 90-250V at 50-60Hz. Operation condition : -7~40℃, below 75%RH Storage condition: -20~50℃, below 85%RH Battery: 9V battery (6F22) (Not Provided by Seller) Dimensions: 66x151x31 mm Weight: 164g Is customized : Yes APPLICATIONS This unit can be used when you want to do the following items: 1. Find metallic pipes in concrete. 2. Find electrical box, exhaust vent, conduit, rebar, and ducting. 3. Trace hot wires behind ceiling, floor, and wall. 4. Install grab bar, ceiling fan, and chandelier securely.

• Metal scanning for finding nail, pipe, rebar, and other hidden metallic object
• When detects an edge of object, The top signal LED lights as an indicator
• When detects an object, The spotlight appears and mark in the groove position
• Owns there different functions: stud finder, metal detector and AC Tracer
• Power supplied by 1 pieces 9V(6F22) battery. (Not Provided by Seller)

User questions & answers

Question:	How. Deep will it work how thick of wall will it read through
Answer:	My husband used it to hang window boxes. We have aluminum siding over a 1954 built wooden house. It worked to find the studs. Heavy 6 foot window boxes have held for 7 months so it worked!
Question:	will this find heating strips in the ceiling
Answer:	If the ceiling is made of plank, it can find. If it is made of concrete, then it can't.

Product features

Stud Finder

Stud mode : Wood stud of 30 x 30mm; ≤18mm

AC Voltage Detector

AC mode: Typical depth of 50mm for 90--250V at 50--60Hz.

Metal Detector

Metal mode: Iron pipe of 25mm; ≤30mm

Product description

Specifications:

Name: wall scanner

Material: ABS

Maximum Detection Depth:

Metal Scan: 3" (78mm)

AC Live Wire Scan: 3" (78mm)

Wood and Metal Stud Scan: 1 1/2" (38mm)

Operating Temperature: -20 ～ 50℃

Storage Temperature: -20 ～ 50℃

Power Supply: 1 * 9V 6F22 Battery (Not Included)

Size: Approx. 162*68mm

Color: Black+Red

Purpose: It can detect the center position of the metal or wooden stem in the wall, and can detect the metal material and live wires in the wall



Package List:

1 * Wall Stud Detector

1 * User Manual



note:

Due to manual measurements, please allow a difference of 1-3mm.

Due to the different displays and different lighting, the image may not display the actual color of the item. Thank you for your understanding.

• ● LCD with Backlight Display: Large LCD digital display with illuminated graphical and sound signal indication, also with battery level indication
• ● Three Detecting Modes:It can detect wood and metal stems, the wall thickness is within 1 1/2 inches (38 mm), it can detect metal pipes, the wall thickness is within 3 inches (76 mm), and it can detect live wires in the wall, and the wall thickness is within 3 inches ( 76 mm)
• ● Ergonomic Design: Handheld and anti-slip body for comfortable and firm grip, convenient to use
• ● Easy to Use: Only three buttons, first press ON/OFF power button, then select the Mode Switch Button,after that just press the "Scan button"(at the left side of the device) and scan horizontally across the object surface
• ● It is used to detect the center position of metal or wood stalks in the wall. In addition, it can detect the metal and voltage functions in the wall, and whether the wires in the wall are live