13 best crl lock cylinders
CRL lock cylinders, also known as cylinders or lock cores, are key-operated devices used in door hardware to control the locking and unlocking mechanisms of various types of locks. Here's what you need to know about CRL lock cylinders:
Purpose:
- The primary purpose of a lock cylinder is to allow authorized individuals to operate a lock. It serves as the interface between the key and the locking mechanism.
Components:
- Keyway: This is the specific pattern or design of the key that matches the lock cylinder.Different manufacturers have their own unique keyways.
- Tumblers and Pins: These are internal components within the cylinder that align when the correct key is inserted, allowing the lock to turn and open.
- Plug: This is the part of the cylinder that turns when the key is inserted, activating the lock mechanism.
- Cylinder Housing: This is the outer shell that houses the plug, tumblers, and pins.
Types of Lock Cylinders:
- Single Cylinder: These have a keyhole on one side of the door and a thumb turn on the other side. They can be locked and unlocked from the outside with a key, and from the inside with a thumb turn.
- Double Cylinder: These have keyholes on both sides of the door, requiring a key for entry or exit on both sides. They provide additional security but may pose a safety risk in emergencies.
- Keyed Alike: Multiple lock cylinders that are designed to be operated by the same key.
Compatibility:
- It's important to choose a lock cylinder that is compatible with the specific type and brand of lock you have. Different locks have different cylinder requirements.
Installation:
- Installing or replacing a lock cylinder typically involves removing the existing cylinder and inserting the new one. This may require some disassembly of the lockset.
Security Features:
- Some high-security lock cylinders have additional features like anti-pick pins, bump resistance, and drill resistance to enhance security.
Key Control:
- Key control refers to the ability to control and monitor who has copies of the keys for a particular lock cylinder. Some systems offer restricted keyways to prevent unauthorized duplication.
Maintenance:
- Regular lubrication of the lock cylinder can help prevent wear and ensure smooth operation.
Remember to consult the manufacturer's instructions or seek professional advice if you're unsure about the specific lock cylinder requirements for your door hardware. Choosing the right lock cylinder is crucial for maintaining the security and functionality of your locks.
Below you can find our editor's choice of the best crl lock cylinders on the market
CRL Polished Stainless Keyed Alike Cylinder Lock with Thumbturn
CR Laurence
Product description
These CRL Extended Length Cylinders work on a PTH311 Series Lever Latch installation, in conjunction with a PTH314 Glass Mounted Latch Keeper on an inswing door. Available keyed randomly or alike.
- Available in Cylinder/Thumbturn and Cylinder/Cylinder
- Available in Several Finishes
- Works on PTH311 Series Lever Latch Installation and Euro Style Patch Locks EUR205, EUR680, and EUR681
User questions & answers
| Question: | will this fit a anderson door |
| Answer: | YEP |
| Question: | What are the dimensions |
| Answer: | Try going to their web sight |
| Question: | Ad says "keyed alike" - but there is only one lock. How do you get a pair keyed alike? Does the advertiser know what keyed alike means |
| Answer: | Will fit both guns. It is the correct set for the G30. The G22 would take "low" style sight. These are more designed for Target or competition shooting. For the G30 if you are wanting for concealed carry I'd recommend factory night sights or a steel sight as they are much more durable. |
| Question: | What is the keyway type. Is it a KW |
| Answer: | I bought these for my Glock 19, 9MM and Glock 36, .45 ACP. I love them! Very accurate and they stand out for two eye shooting during the day. |
CRL Cylinder Lock with Compatible Keyway for Weiser Kwikset and Weslock - E2000
CRL
Product description
This CRL Keyed Cylinder Lock is used to key lock most surface mount handle sets. It is a five tumbler lock and has a 1-7/8 inch (47.6 millimeter) hardened break-away tail piece. The keyway is compatible with Weiser, Kwikset and Weslock. One lock with two keys per package.
- Official C.R. Laurence Product
C.R. LAURENCE DL2230 CRL Threshold Bolt Kit for 34" to 37" Cylinder Height
C.R. Laurence
Product description
Adding the CRL Threshold Bolt Kit to a CRL DL2110 or DL2130 Deadlock allows maximum security for pairs of doors by the turn of a key. By simultaneously dropping a hardened steel hex bolt into the threshold, and pivoting the Deadlock Throw Bolt into the mating door's stile, the two-point lock secures the entire double door entrance.
- For Use with Deadlock to Provide Two-Point Locking Security3/8" (10 mm) Hexagon Hardened Steel Bolt11/16" (17.4 mm) Bolt Throw
C.R. LAURENCE LK54KA CRL Nickel Plated Keyed Alike Track Plunger Lock
C.R. Laurence
Product description
No Need to Drill a Hole in Glass Simple to Install Order This Lock if You Need Two or More LK54 Keyed Alike These CRL Nickel Plated Track Plunger Locks install easily on sliding glass doors in showcase track assemblies. They can be mounted in the "H" Bar Shoe Extrusion, or within the surround frame of the glass doors. The spring-activated design permits keyless locking by simply pushing the plunger, but they can only be unlocked by using the key. Lock comes complete with two brass keys and trim washer. Customers needing duplicate keys can order LKEY , which is the blank key for this lock. Color: Nickel Plated Additional Product Information: If the LK54 Lock is being used with D610, D5610 or MC610 H-Bar, the glass will require notching. If being used with LK610 H-Bar and D602 Lower Channel, no glass notching is required. Requires a 13/16 inch (20 millimeter) diameter barrel hole and a 5/16 inch (8 millimeter) diameter plunger hole.
- No Need to Drill a Hole in Glass
- Easy-to-Install
User questions & answers
| Question: | Will this work for dispay case that does not have glass doors ?Also what is the difference between LK54 and LK54 KA? seems "keyed alike" would be mor |
| Answer: | You can get a Jessica Rabbit wig for a similar price and you won't need to modify it. I would say that while this wig is fluffy it is not as full as or the same color red. |
| Question: | I need 2 locks and 8 total keys. Are extra keys available? Keyed alike |
| Answer: | The wig that I received was pretty much just like the picture, but not quite as long. It was good quality for a Halloween wig. |
| Question: | Could this be used to lock a wooden filing cabinet drawer |
| Answer: | The one i received looked nothing like the one in the picture. It was BRIGHT orange and you could see right through the hair several places |
| Question: | If i order 2 will they be keyed the same |
| Answer: | Hi friend, the orange wig is the sames as picture. and it is very long when you wear this cosplay wig, it is about on your waist. |
CRL Chrome Track Plunger Lock
CR Laurence
Product description
C.R. LAURENCE 981 CRL Chrome Track Plunger Lock. The CRL Chrome Track Plunger Lock installs easily in track assemblies with sliding glass doors. You can install it in either the top or bottom of the door. The spring-activated design permits locking simply by pushing the plunger without the key. Comes with ferrule and two keys. If the 981 is used with Cat. No."s D610, D5610 or MC610 H-Bar, the glass will require notching. If the LK610 H-Bar is used, no notching of the glass is required. For replacement Keys order Cat. No. 981KEY.. Part Numbers Variations: 981
- CRL 981 Keyed Alike Track Plunger Lock - Chrome
Desunia Office Desk Lock for Drawer & Door - 7/8" (.875") Bore - Antique Bronze - Keyed Alike - Includes Escutcheon Trim Ring, Strike, & Screws - 2 Locks
Desunia
Product description
An affordable, easy to install solution for adding security to your valuables!
Whether you're looking to add some security to an office desk drawer, or want to restrict access to the liquor cabinet while you're away from home, this keyed lock from Desunia can help!
Specifications
- The cylinder on this lock measures .866" in diameter and requires a 7/8" hole.
- The length of the cylinder is 15/16", so when installed in a 3/4" door/drawer front, it will project 3/16" off the face.
- Keys are all identical, allowing you to purchase multiple locks without having to keep track of what key goes where.
- Throw bolt has 7/16" of travel.
- Antique bronze plating compliments all furniture.
Installation Tips
- Examine the operation of the lock to determine where to bore your hole.
- Bore a 7/8" diameter hole with a sharp bit (be sure to clamp a "back up board" to the piece to avoid chipping out the back).
- Mount the lock with the provided screws.
- Install the strike plate, taking into account that because every situation is different, some wood blocking may be necessary to achieve proper alignment.
- Complete the installation by installing the escutcheon trim ring. This should fit snuggly, but if there's any play, a drop of glue should secure it just fine.
Here's what you get...
- 2 Antique bronze locks with 7/8" cylinder
- 4 Keys
- 2 Nickel strike plates
- 2 Antique bronze escutcheon trim rings
- All the necessary screws
- UNIVERSAL FIT - Easily retrofits into any wood door/drawer with a 7/8" diameter hole
- KEYED ALIKE - Keys are 2 sided and identical, allowing you to purchase multiple locks without having to worry about which goes where
- FANTASTIC FINISH - Beautiful antiaque bronze plating compliments all fine cabinetry
- ESCUTCHEON INCLUDED - Trim ring creates a clean, professional installation, even in imperfectly bored holes.
- IT'S ALL HERE - Comes with strike plate, 2 keys, and all the necessary screws - 2 Locks
User questions & answers
| Question: | I need to order a new lock, is there a way to have it use the same key as 2 locks I bought previously |
| Answer: | It is Y1 - or something close to it. |
| Question: | How can i return these? i have 8 that i can't use in the application i have. i had no way of knowing this based upon limited specs. please advise |
| Answer: | Unfortunately we only carry this item in white. Thank you, Customer Service Team LK Technologies, Inc., a Gordon Glass Co. |
| Question: | Can this be installed from the side with strike plate and NOT the front of the drawer |
| Answer: | The most common is 1 1/4". |
| Question: | would it be possible to purchase 28 locks or more, pl;us a jig for installing |
| Answer: | No. To find the right one I recommend allaboutdoors.com |
Prime-Line Products C 1275 Sliding Door Handle Set with Latch, White, 1-Pack
PRIME-LINE
Product description
Die-cast inside and outside pulls with thumb lever. Reversible handle. Powder coated finish. Mortise style, uses E-2000 to key lock. Latch Style: Safety Lock
From the Manufacturer
Die-cast inside and outside pulls with thumb lever. Reversible handle. Powder coated finish. Mortise style, uses E-2000 to key lock.
- Fits Roto Brand
- 7/32 square tailpiece on lever
- Fits E 2192 dual point lock
- White finish
User questions & answers
| Question: | Will this fit a slider that is 1-15/16" thick |
| Answer: | No, it didnt need to be washed |
| Question: | where can i get parts for this handle |
| Answer: | you really can not put the hair up easily in a bun, but you could probably make two small, low-sitting messy knots on each side. i always wear this wig as is and it has better synthetic hair strands than most that ive purchased because i notice they dont tangle as much or at all really. it looks good for not having a lace front..I did buy another wig that with similar to this one it did not have a lace front and it looked horrible on you could tell it was a wig but this one seems to be much more natural-looking. |
| Question: | Does this have a lock you use a key with? There is no picture of the other side |
| Answer: | No. I did use a hair dryer to style it dry. |
| Question: | Will this replace ykk-1 styleview nsd425 sliding glass doors latch handle |
| Answer: | No, it is very thick. |
C.R. LAURENCE DRA30PS CRL Polished Stainless Mortise Dummy Cylinder
C.R. Laurence
Product description
Designed to Fit CRL Wedge-Lock Door Rails and Others Fills Abandoned Cylinder Holes Available in Several Finishes CRL Mortise Dummy Cylinder is used to fill in a cylinder hole that has been abandoned or is not going to be used. Available in several architectural finishes to match CRL door rails. Color: Polished Stainless
- Fit All Standard CRL Door Rails with Standard Bottom Rail Lock
- Can Be Used as Replacements for Most Other Manufacturer's Bottom Rail Locks
- Solid Brass
- Unique Low Profile Thumbturn
User questions & answers
| Question: | can this be used as an extender for a thumbturn cylinder |
| Answer: | you can see the reviews left by customers, which have pictures and videos |
CRL Bronze Finish Cam Lock - Keyed Alike
C.R. Laurence
Product description
Easy To Install Available in Several Finishes Comes With Both Straight and Offset Cams Order This Lock if You Need Two or More D805BRZ Keyed Alike CRL Cam Lock is an easy-to-install lock is used for hinged doors. It is installed in CRL Extrusion numbers D626, D644 or D673 for glass or mirrored hinged doors Color: Bronze Finish Minimum Order: 1 Each Requires a 3/4 inch (19 millimeter) diameter hole for installation. One package consists of: One lock, straight and offset cam plus two keys.
- Official C.R. Laurence Product
User questions & answers
| Question: | Are these available in bright or dull chrome? Can I order 20 of them keyed alike |
| Answer: | It should be able to since it's human hair, I believe I saw someone color this wig. But I have not personally. |
| Question: | how many locks are in this package |
| Answer: | No shedding or tangling!! I love this unit |
| Question: | What is the maximum thickness your door/face frames can be for using the offset cam on this lock? Will it work for overlay doors of 1.5" thickness |
| Answer: | Yes |
CRL Chrome No-Drill Showcase Lock - Keyed Alike
CRL
Product description
Quick and Easy to Install Available in Several Different Finishes Use On Any Swinging Glass Door Order This Lock if You Need Two or More 255CH Keyed Alike This CRL No-Drill Showcase Lock is designed for swinging glass doors and is easily installed by peeling off the adhesive liner and placing the Lock and Receiver in the desired location on the glass. No drilling or notching of glass is required. The No-Drill Lock can be used on any thickness of glass door or showcase. Available in several different finishes to match popular showcase extrusions and can be ordered keyed randomly or alike. Color: Chrome Minimum Order: 1 Each
- Quick and Easy-to-Install
- Available in Several Different Finishes
- Just Peel and Stick on Any Swinging Door
User questions & answers
| Question: | Is there a screw version of this instead of sticking it I can screw it |
| Answer: | GREAT CARE is put into this pasta, only 2 ingredients select durum wheat semolina & pure spring water. Extruded thru bronze dies, resulting in roughed surface that holds the sauce. Air dried, in temp controlled chamber up to 56 hours adding another dimension to flavor & texture. 17oz yields, 5 (3.5oz servings). It is an indulgence. Adult spaghettios. 😋 |
| Question: | We purchased this lock in March and it has fallen off, unglued, it just came off overnight. Could we get a replacement |
| Answer: | It said all natural ingredients on the packaging but the word organic is not used!! |
| Question: | can you us this on flat glass boor display cabinet? or just on corner of box style |
| Answer: | There are 44g carbohydrates in a 2 ounce dry serving |
CRL Dark Bronze Jackson Base End Cap Package for Model 1285 Exit Device 302652313
Jackson Door Control Hardware
Product description
Replacement end caps for Jackson 1280 Series Exit Devices. Replacement caps for the fixed non-moving bar. Dark Bronze metal end caps.
- Direct Replacement End Caps for CRL Jackson Model 1285 Exit Device
- Includes Mounting Hardware for End Caps
Berlin Modisch Entry Lever Door Handle and Single Cylinder Deadbolt Lock and Key Slim Square Locking Lever Handle Set [Front Door or Office] Right & Left Sided Doors Heavy Duty – Iron Black Finish
Berlin Modisch
Product description
Berlin Modisch Entrance Lever door handle [Lock with Two keys] and Single Cylinder Deadbolt set for office or front door with an Iron Black Finish, Reversible for Right & Left side,
Product Description:
This Premium Quality Deadbolt & Entrance Lever door handle set features a special Square-styled, with an amazing iron black finish. This hardware piece is fully fitted with an adjustable latch of 60/70mm. and a radius square corner strike.
Package Includes:
* Entrance Lever door handle (reversible for right and left hand doors)
Single Cylinder Deadbolt (reversible for right and left hand doors)
* Radius square corner strike (with latch box)
* Diagram template for installation
* Four keys for the lock (all keyed alike)
From the manufacturer:
Our Premium Quality Square-Styled Entrance door knobs and deadbolt set is an ideal decorative accessory, professionally designed to perfectly compliment a wide range of contemporary and modern, residential interior and exterior doors. This deluxe hardware is creatively fitted with a, reversible, lever handle designed to perform very efficiently, whether it receives a left-handed or right-handed application. This original lockset comes with four keys. It also features a special square-corner striker and an incredibly adjustable latch style which is 60/70mm. and is designed to fit doors between 1-3/8 inch and 1-3/4 inch. It has an iron black finish and is protected by a clear powder coat finish.
- Designed to complement modern contemporary style interior and exterior doors for commercial and residential applications front entry door handleset low profile lever and deadbolt set
- Heavy duty high grade security door dead bolt and lever knob reversible that makes it perfect for fitting left or right handed doors
- Uniquely crafted low profile square shaped door lever and dead-bolt Entrance Set With 2 3/8 inch- 2 3/4 inch adjustable backset latches and square corner strikers
- Comes with unique thumb-turn interior lock knob that that is opened by an exterior key KW1 keyway for office or front doors, matt black color
- Durable & Portable secure handle & deadbolt which Fits 1-3/8-Inch-1-3/4-Inch doors Iron Black Finish.
User questions & answers
| Question: | Can i order both a handleset with a deadbolt (for the front door) and a entry/deadbolt combo (door to the garage) to all be keyed the same |
| Answer: | Don't know, but you could certainly get the cylinder re-keyed.... |
| Question: | Im looking to buy these for my french doors in my office. I need 1 dummy and 1 turning with/without lock. Do you sell that as a kit |
| Answer: | This is a set. i bought this as a set which is a privacy set (has locking system but no key) come as both sides turning. |
| Question: | If i ordered 6 dead bolt lock sets can i be assured that each would be keyed differently? or would i be able to include that spec with my order |
| Answer: | Yes, each cylinder lock is uniquely keyed |
| Question: | What ansi grade level is this? doesn't look extremely secure for front door |
| Answer: | I honestly don’t think i would opt to put on my front door but it is a quality product. |
C.R. LAURENCE C1219 CRL White Sliding Glass Door Handle with Mortise Lock
C.R. Laurence
Product description
C.R. LAURENCE C1219 CRL White Sliding Glass Door Handle with Mortise Lock. This popular Sliding Glass Door Handle has a white powder-coated finish. The mounting hole centers are 3-15/16" (100 mm). The outside pull is a raised die cast body which can be modified to accept an optional key cylinder. This handle comes complete with an E2014 mortise latch. Mounting fasteners are included.. Part Numbers Variations: C1219
- Includes Most Popular Mortise Lock
- Non-Handed
Latest Reviews
View all
Rca 10 Inch Laptops
- Updated: 15.07.2023
- Read reviews
Tattoo Ink Sets
- Updated: 22.03.2023
- Read reviews
Hc Garden Hoses
- Updated: 13.06.2023
- Read reviews
Kaka Humidifiers
- Updated: 19.01.2023
- Read reviews
Lap Desks
- Updated: 15.02.2023
- Read reviews