14 best bullseye stud finders

Product description

The item is Black & Decker BDL190S BullsEye Auto-Leveling Interior Line Laser with Stud Sensor . Used for Test & Measurement, Levels. The product is manufactured in China. Amazon.com The Black & Decker BDL190S BullsEye Auto-leveling Interior Line Laser and Stud Sensor Combination Tool is an ideal tool for hanging pictures, detecting wood and metal studs, locating live A/C wires, and installing decorative items. With patented auto-leveling technology, this leveler is actually two tools in one--an auto-leveling laser level and a stud sensor. Its auto-leveling laser levels automatically without adjustments and projects horizontal laser lines. Other features include a stud sensor to detect wood, metal, studs, and live A/C wires and an easy to read LCD display. Categorized as a class II laser, this laser level comes backed by a 2-year limited warranty.

The Black & Decker BDL190S BullsEye Auto-leveling Interior Line Laser and Stud Sensor Combination Tool is an ideal tool for hanging pictures, detecting wood and metal studs, locating live A/C wires, and installing decorative items. With patented auto-leveling technology, this leveler is actually two tools in one--an auto-leveling laser level and a stud sensor. Its auto-leveling laser levels automatically without adjustments and projects horizontal laser lines. Other features include a stud sensor to detect wood, metal, studs, and live A/C wires and an easy to read LCD display. Categorized as a class IIIR laser, this laser level comes backed by a 2-year limited warranty.

• Two tools in one--an auto-leveling laser level and a stud sensor
• Detects wood, metal, studs and live A/C wires
• Patented auto-leveling technology
• Easy to read LCD display
• 2-year limited warranty
• This is a Class 3R laser product, Power output ≤ 5mW
• Laser Class IIIa, <5mW @ 633nm-670nm

User questions & answers

Question:	Does it really come with a case? Some say it does, some say it does not. Which is it
Answer:	The clear display package it comes in is considered to be the “case”. The display package opens up like a book once you cut the black band keeping the two sides together. If you’re expecting a traditional nylon case, then you will be disappointed. I was disappointed when I found out there was no nylon case, but the provided packaging works just fine for me now. Thank you.
Question:	Can the device put out correct vertical lines if turned 90 degrees
Answer:	No, only horizontally. When you go vertical the laser isn't a sharp line
Question:	Does this come with a case
Answer:	yeah, the plastic case it comes in is the case. Not a fan
Question:	How does the unit afix to the wall
Answer:	A hanger is included to attach to the wall

Product features

BullsEye Auto Leveling Laser

- BullsEye auto-leveling technology

- Two tools in one to simplify hanging and mounting projects

- Levels automatically for precise BullsEye results

- Projects horizontal level line

- Stud sensor detects wood and metal studs plus live A/C wires

- LCD Display Easy To Read

• The Most Accurate Wall Scanner- Tavool specializes in stud finder for years and adopts the most Advance Sensors Technology for accurately & quickly locating studs wood metal AC wires! In all modes, this wall scanner always detect and indicate the Live AC Wire. Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in this electronic stud scanner
• 4 IN 1 Multiplication Plus Deep Detection - This digital wall scanner includes four different scanning modes for woods, beam, joist, metals, AC wires and deeply embedded objects behind floor, ceiling, wall. Stud mode detects wooden beams and joists in drywall up to 1.2 inches. Metal mode detects pipe , rebar, aluminum and copper up to 1.57 inches.Deep mode detects wood and metal parts located up to 1.77 inches while 85~240 volt AC current for voltage and live electrical lines up to 2.36 inches
• Upgrade Design of LCD Screen - Displaying the Desired Stud Material As Well As the Precise Position of the Stud - The Tavool digital stud scanner features large LCD display together with the big sound to detect the accurate location of stud metal Ac wires. When find the material, the LCD display will indicate the direction and the intensity of sound tells whether you are more close to the target. The fast detection saves users time and efforts, making the task completion EASIER
• Automatic Calibration and Ergonomic Grip for Comfortable Use - Turning on the stud finder and Completing Calibration. The automatic calibration before using provides users with maximum reliability and accuracy. Then put it on the wall. The wood beam finder will flash once it has picked up the edge of a stud.The ergonomic design of this wall stud finder makes it comfortable to hold from any angle
• Professional Design with Top Quality - Tavool has been dedicated to Research and develop stud finders for many years, and we have a professional team and mature productions process. This stud joist finder wall detector can quickly locate the metal wood AC wire that are hidden in the walls, floors and ceilings of your house, help you find the exact stud while installing TVs, cabinets, garage shelves etc.

User questions & answers

Question:	Is there an instruction manual online? I misplaced the manual that came in the box
Answer:	Si puede solicitar un manual de instrucciones en [email protected]
Question:	Will this locate studs behind bathroom tiles
Answer:	If your tile wall has cement backer board, then this device will not work. If your tile is backed by sheetrock, then it will probably work unless your tile is took thick. I wouldn't trust it to locate pipes behind tile, so take care if you're working in a bathroom.
Question:	Is the battery included
Answer:	No the 9volt battery is not included.
Question:	Can this detect a stud behind plaster walls
Answer:	This tud finder can quickly locate metal, studs, joists, pipes, live AC wire behind all kinds of walls floors and ceilings but except the cement board wall, you can use it on popcorn ceilings, plaster walls, textured surfaces,etc

Product features

Stud Scan Detection

Deep Scan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. DeepScan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. To minimize false positives and/or finding other objects further behind the wall that may not be a stud, always start your scan in StudScan Mode first.

Metal Scan Detection

Tavool wall canner will locate metal studs in StudScan, DeepScan, and Metal Scan Modes. Since Tavool stud finders are looking for a change in density behind drywall, not a particular material, in StudScan and DeepScan Modes the detector will react to metal studs the same as it would for wooden studs.

After you detect the center of a object, Please Use Metal Scan to determine if the previous reading in Stud scan was a wood stud, metal stud, or pipe.

Live AC Wire Detection

AC Wire detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51 mm) deep. In all modes, this wall scanner always detect and indicate the Live AC Wire.

Note: AC Wire Detection works in both StudScan / DeepScan / MetalScan Modes. The AC Wire Detection Icon will flash when live, unshielded wires are detected.

Step 1:Calibrate the tool before every scan

After choose the mode, press and hold the scan button( on the side of the tool) to calibrate this tool. Wait for the reducing bars disappeared and beep to confirm calibration has completed.

In stud/deep mode, put it on the wall where you want to detect to calibrate it ;In AC/Metal mode, put it in the air to calibrate it.

Step 2: Scan the wall

Hold down the button, then move the stud finder along the wall slowly, if shake or lift the scanner accidently, the device needs to be re-calibrate.

The narrow on the screen togather with the beep signal alter, guides you to find the location of the stud.

Step 3: Find the location of the stud

When the signal bar is full and the beep alarm is loudest, it means you have found the center of an object.Mark it with your pencil.

Then choose the Metal Scan mode to test whether it is a metal. After you confirm that it is not a metal, it means that you found the center of a stud. (More details refer to the above description of "Metal Scan Detection")Then you can drill it to hang thing

Product description

High accuracy: uses 13 sensors to give accurate readings every time; one-step operation: just press the button; when placed on wall LED lights instantly indicate studs; deep sensing: more sensor pad area than other scanners results in deeper scan; triple accuracy technology analyzes and triangulates data from all the sensors for highest accuracy; Built-in bubble level makes this 2 tools in 1!

• Prosensor 710+ professional stud finder with built-in bubble level and ruler
• Small
• Yellow

User questions & answers

Question:	does it detect floor studs under carpet and padding
Answer:	Scan goes 1.5 inches on deep scan most subfloors are 1 inch plus carpet and pad.....my guess is no. Im guessing you need to add floor outlet. In that case look for hvac vents in floor to show orientation of floor joices. Best thing ive done is drill 1/8 inch hole and put long steel wire down through insulation then go in crawl to see if in between floor joices. Ive seen some electricians just drill it where homeowner wants floor outlet and if they hit joice they just drilled it out and installed floorbox to hide mistake. Most stud finders dont do good on flooring
Question:	Does it work on metal studs
Answer:	Yes.
Question:	Our walls are 3/4 inch tongue and groove. Will this be able to detect through that
Answer:	The ProSensor 710+ should detect through wood tongue and groove walling material.
Question:	will it detect and show studs behind plaster and lath
Answer:	This unit can detect studs through lath and plaster, but it is not guaranteed as it is on drywall. Because lath and plaster usually is usually thicker and less consistent, it could lead to some inconsistent readings. The multiple sensors and deep sensing capabilities on this stud finder give it a better chance on lath and plaster, but it cannot be guaranteed.

Product features

ProSensor 710

Unlike conventional stud finders which use only 1 or 2 sensors, the Franklin Sensors ProSensor 710 uses 13 sensors simultaneously to detect studs. This multi-sense technology eliminates the calibration step other brand stud finders require. Just put it on the wall and press the button. It's quick and easy.

The ProSensor 710 can detect multiple studs simultaneously. It accurately displays the center and edges of a stud at the same time.

• GREAT ACCURACY AND CONSISTENCY - Tavool stud finder is professionally designed! Tavool stud finders uses the UPGRADE INTERNAL SENSORS. It senses a change in density in the space behind the wall and locates the stud center with GREAT ACCURACY. In additions. The shape of this wall scanner also shows the edges of the stud. The center of a stud is the most secure location when mounting anything heavy. The edges help you to recheck the locations. Take it home, makes your DIY homework easier!
• 5 SCANNING MODES UP TO 60MM DEPTH - Tavool stud locator has mufti-fuctions and can quickly and easily locates wood metal studs joists beams metal pipe rebar and live AC wire behind walls, floors, and ceilings. StudScan Mode scans through one layer of drywall up to 0.5 in.（12mm) and 1 in . (25mm) thick. DeepScan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. Deep Stud Scan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard
• WIRE WSRNNING INDICATOR, NO FEAR OF DRILLING INTO A LIVE WIRE - WireWarning Detection is up to 2 in.(51mm) deep. The added bonus is that the wire warning is ALWAYS ON while you are scanning in StudScan/DeepScan/MetalScan Modes, to alert you to the presence of live, unshielded electrical AC wires up to 2 in. (50 mm) deep, which helps you avoid drilling or hammering into a water pipe or electrical wire.Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in it
• EASY TO READLCD DISPLAY +SOULD WARNING HELPS FIND STUD CENTER AND STUD DEGES EASILY - Displaying the Desired Stud Center As Well As the Precise Position of the Stud - The Tavool digital stud detector features large LCD display together with the big sound warning to detect the accurate location of the objects. When find the material, the LCD display will indicate the direction and the intensity of beeping tells whether you are more close to the target. The fast detection saves users time greatly
• WHY RECOMMEND TAVOOL STUD FINDER TO YOU: Tavool has been dedicated to Research and develop stud finders for many years, and we have a professional team and mature productions process. Tavool stud finder not only gives you top quality and great accuracy, but also provide muti-functions to meet your practical needs on drywall, lathe wall, ceiling, plasterboard wall, wallboard etc.

Product features

Stud Scan Detection

This stud locator has 3 stud scan modes. Deep Scan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. DeepScan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. To minimize false positives and/or finding other objects further behind the wall that may not be a stud, always start your scan in StudScan Mode first.

Metal Scan Detection

Tavool wall canner will locate metal studs in StudScan, DeepScan, and Metal Scan Modes. Since Tavool stud finders are looking for a change in density behind drywall, not a particular material, in StudScan and DeepScan Modes the detector will react to metal studs the same as it would for wooden studs.

After you detect the center of a object, Please Use Metal Scan to determine if the previous reading in Stud scan was a wood stud, metal stud, or pipe.

Wire Warning Detection

Wire Warning detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51 mm) deep. For Safety, in all modes, this wall scanner always detect and indicate the Live AC Wire.

Note: WireWarning Detection works in both StudScan / DeepScan / MetalScan Modes. The WireWarning Detection Icon will flash when live, unshielded wires are detected.

Step 1:Calibrate the tool before every scan

After choose the mode, press and hold the scan button( on the side of the tool) to calibrate this tool. Wait for the reducing bars disappeared and beep to confirm calibration has completed.

In stud/deep mode, put it on the wall where you want to detect to calibrate it ;In AC/Metal mode, put it in the air to calibrate it.

Step 2: Scan the wall

Hold down the button, then move the stud finder along the wall slowly, if shake or lift the scanner accidently, the device needs to be re-calibrate.

The narrow on the screen togather with the beep signal alter, guides you to find the location of the stud.

Step 3: Find the location of the stud

When the signal bar is full and the beep alarm is loudest, it means you have found the center of an object.Mark it with your pencil.

Then choose the Metal Scan mode to test whether it is a metal. After you confirm that it is not a metal, it means that you found the center of a stud. (More details refer to the above description of "Metal Scan Detection")Then you can drill it to hang thing

Product description

Stanley Bullseye Auto-Leveling Laser with AnglePro BDL170 Electronic Tools & Gadgets Amazon.com The Black & Decker BDL170 Bullseye Auto-leveling Laser With AnglePro is ideal for hanging decorative items, shelving, pictures, and for angled applications, such as hanging items along a staircase. Features include a bullseye auto leveling laser that levels automatically without adjustments, and this leveler can even project horizontal and vertical lines for added versatility. Other features include an automatic reference for angled lines, rubber overmolds for additional protection, and a back light for better visibility of the angle reference points. Categorized as a class II laser, this laser level comes backed by a 2-year limited warranty. This leveler comes with two AAA batteries and a wall mount. This is a Class 2 laser product, Power output ≤ 2.2mW. Included Components: AAA batteries, Wall Mount

The Black & Decker BDL170 Bullseye Auto-leveling Laser With AnglePro is ideal for hanging decorative items, shelving, pictures, and for angled applications, such as hanging items along a staircase. Features include a bullseye auto leveling laser that levels automatically without adjustments, and this leveler can even project horizontal and vertical lines for added versatility. Other features include an automatic reference for angled lines, rubber overmolds for additional protection, and a back light for better visibility of the angle reference points. Categorized as a class II laser, this laser level comes backed by a 2-year limited warranty. This leveler comes with two AAA batteries and a wall mount.

• Projects horizontal and vertical lines
• Automatically levels; automatic reference for angled lines
• Rubber overmolds for additional protection; includes a back light for better visibility of the angle reference points
• 2-year limited warranty
• Included with leveler: two AAA batteries and wall mount

User questions & answers

Question:	Will this work for floors? Or does it have to be hanging free in order to auto-level. I need to establish a level line 2" above my wavy old floor
Answer:	I have the same question, I am putting in new floors and want to level them in this old house.
Question:	Is there an option for it to level itself
Answer:	Yes, it automatically levels itself.
Question:	Can It project horizontal laser line to both side at the same time
Answer:	It cannot. The laser projects out of any one of the three slits (left, top, right) at a time.
Question:	How does the wall mount work
Answer:	The wall mount is an oval-shaped plastic unit with a retractable ~5/8" spike on the back. It is hung using the spike and then the laser unit will attach magnetically. Note that the spike lines up level with the laser, so you use the spike as a pilot hole for your first hole when mounting things. The laser will of course also work without the wall mount, you can just hold it against the wall and it works fine that way too if you're not drilling. Hope that helps!

Product description

The Zircon MultiScanner 740 center finding electronic wall scanner quickly and easily locates studs, detects metal, locates live, unshielded AC wires and allows you to mark your target. Complete with the latest technology in density detecting software and circuitry, an ergonomic body design, and an erasable marking system. Unlike other wall sensors, scanners and stud finders, the MS 740 is uniquely designed with a "floating head" that keeps the scanning surface level on textured or rough surfaces so results are more accurate. The 4-mode switch makes it easy to change functions while the ultra-bright display screen, dual SpotLite Pointing System, and audio tone all indicate the location of the target. The Signal Strength Indicator helps to distinguish between shallow and deep targets. The MultiScanner 740 also includes ACT (Auto Correcting Technology) that automatically corrects common user errors, such as when scanning begins over a stud, in addition to a low battery indicator to alert its users to replace its battery for optimal performance results. In StudScan mode, the multifunctional 740 locates the center, edges, and direction of wood or metal studs up to 3/4 of an inch (19 mm) deep. Switch over to DeepScan mode and double the scanning depth to 1.5 inches (38 mm). Metal Scan mode of the MS740 provides the ability to locate non-ferrous metal, such as copper pipes, up to 1.5 inches (38 mm) deep and ferrous metal, such as rebar, up to 3 inches (75 mm) deep. Using Metal Scan mode, studs can be found behind lath and plaster walls, tile, drywall and stucco walls by identifying the consistent pattern of screw or nail heads in the studs. Additionally, the MS 740 is programmed with a WireWarning Detection feature that indicates the presence of live unshielded electrical wires up to 2 inches (50 mm) deep when using the stud and metal scan modes. To detect, locate, map, and trace the live wires, simply switch over to the AC Scan function which finds and traces live, unshielded AC wiring up to 2 inches (50 mm) deep. Then use the integrated, erasable marker to note the progression of the wires, studs, or other objects behind the walls. With the Zircon MS740, you can safely maneuver through the most complicated of projects with the professional confidence that comes from owning a Zircon.

• Zircon's MS 740 is a multi-surface scanner with 4 modes that allows you to detect and mark the location of studs, metal and live AC wiring
• ACT (Auto Correcting Technology) that automatically corrects common user errors, such as when scanning begins over a stud, in addition to the unique floating head design that keeps the sensor flat on rough and textured surfaces to increase the accuracy of results
• Both StudScan and DeepScan modes locate the edges, center and direction of wood or metal studs and joists; Metal Scan mode finds both non-ferrous metal (such as copper pipe) and ferrous metal (such as rebar) even through lath and plaster; AC Scan finds and traces live, unshielded electrical AC wires
• WireWarning Detection indicates the presence of live, unshielded electrical AC wiring while scanning in StudScan, DeepScan, and Metal Scan modes
• Integrated erasable wall marker enables users to mark targets with the simple push of a button

Product features

MultiScanner 740 Center Finding Stud Finder

The MS 740 is the latest in Zircon's professional line of center finding stud finders. With a unique floating head design, easy one-handed operation, and updated density analyzing software, this tool lends itself to the professional who understands that accuracy and safety count!

Features Include:

The Key to Success is in the Battery

A new, fully charged 9V battery is required to steadily power the integrated LCD screen in Zircon tools. Please note that, like a cell phone or any personal electronic device, the 9V batteries needed to power Zircon tools can lose power even when sitting idle. The installation of a fresh battery, with an extended expiration date, typically resolves 99% of problems seen by Zircon Customer Support.

Find the Edges and the Center of Studs

1. StudScan Mode:

Use this mode to find the center, edges, and direction of wood or metal studs up to 3/4 inches (19 millimeters) deep. For best results, always start in this mode when looking for studs.

Note: WireWarning detection works in all modes. The indicator flashes on the screen when detecting a live, unshielded wire.

2. DeepScan:

If Stud Scan mode provides irregular readings, or the Signal Strength Indicator is weak, the studs might be behind more than ¾ inches (19 millimeters) of drywall Quickly push the handle of the device downward twice to switch into DeepScan mode. This doubles the scanning depth to 1½ inches (38 millimeters) deep and allows for increased accuracy on deeper targets.

Note: WireWarning detection works in all modes. The indicator flashes on the screen when detecting a live, unshielded wire.

Metal Scan Mode Detects Both Ferrous and Non-Ferrous Metal

3. Metal Scan Mode:

Use this mode to locate and avoid hazards such as pipes behind walls. Metal Scan mode detects non-ferrous metal such as copper pipe up to 1½ inches deep, and ferrous metal such as rebar, up to 3 inches deep.

Use Metal Scan mode to differentiate between metal and wood studs. First, find the stud in StudScan mode. Then, switch to Metal Scan mode and run the MS 740 up and down the stud. The tool alerts in a pattern as it detects the drywall screws in the wood for wooden studs. The unit alerts along the length of the studs with metal studs

Note: WireWarning detection works in all modes. The indicator flashes on the screen when detecting a live, unshielded wire.

AC Scan Mode Helps Find and Trace Live, Unshielded Wires

4. AC Scan Mode:

In this mode, the LCD screen finds live, unshielded, electrical wires up to 2 inches (51 millimeters) deep. Move the MS 740 slowly across the surface and the signal indicates the proximity of the source. Mark where the strongest signal appears. Continue this process to track the wires through the walls.

Integrated Marking Tool for Easy One-Handed Operation

The MS 740’s integrated erasable marker allows easy, one-handed operation. When the target is found, simply push down on the 'mark' button. The pencil marks the surface without interrupting the scan. The MS 740 comes with a pencil pre-installed, and refills in the box.

Frequently Asked Questions:

Question: What is the scanning depth for the MultiScanner 740?

Answer: The MS 740 scans up to the following depths:

- Stud Scan: ¾ in (19mm) deep.

- DeepScan: 1½ in (38mm).

- Metal Scan: 3 in (76mm).

- AC Scan: 2 in (51 mm).

Question: How can I tell if I’m in DeepScan mode?

Answer: When the MultiScanner 740 is in DeepScan mode, the STUDSCAN indication on the LCD flashes continuously.

Question: How can I be certain the object found behind my wall is a stud when in DeepScan mode?

Answer: The increased sensitivity in DeepScan mode may have located something other than a stud. Studs are equally spaced to either side (12, 16, or 24 in. apart) and typically run from floor to ceiling. To better confirm that what you found is a stud, check for other studs equally spaced to either side 12, 16, or 24 in. apart or for the same stud at several heights directly above and below the first stud indication. A stud reading also measures approximately 1 ½ in. (38 mm) apart from each edge.

Question: The stud finder seems to be detecting more targets than there should be. What am I doing wrong?

Answer: There may be electrical wiring and/or metal or plastic pipes near or touching the back surface of the wall. Switch to Metal Scan mode where, combined with WireWarning detection, pipes and electrical wiring should be detected adequately. You can also check for studs equally spaced to either side (12, 16, or 24 in. apart).

Question: Can I find studs behind lath and plaster construction?

Answer: Yes. Using Metal Scan mode, you can identify a stud behind the lath and plaster wall by locating the pattern of nail or screw heads attaching the wood lath to the studs. The nails or screws should be found in a column when scanning for metal. However, if the plaster has metal mesh reinforcement, MultiScanner 740 may be unable to detect studs through that material.

Question: Can I use this scanner on the exterior of my home?

Answer: No. Zircon StudSensors are designed and recommended for interior use only.

Question: I am having difficulty detecting metal, what can I do to remedy this?

Answer: Recalibrate the tool in another location. The tool could’ve been calibrated over, or close to, a metal object, reducing sensitivity. The metal target could also be too deep; if this is the case scan in both horizontal and vertical directions. Metal sensitivity is increased when metal object is parallel to the sensor, located at the front end of the scanner beneath the cross hairs.

Question: I suspect electrical wires in a certain area when I scan, but why am I not detecting any?

Answer: Wires may be shielded in metal conduit or behind a metallic wall covering. It could also be that the wire is deeper than 2 in. or that the wire may not be live (hot). Try the Metal Scan mode to see if you can find metal, wire, or metal conduit. Always exercise extreme caution when working near electricity.

Question: Is the tool waterproof?

Answer: No. The MultiScanner 740 is splash and water resistant, but not waterproof.

Question: What is the difference between AC Scan and WireWarning detection?

Answer: Most Zircon StudSensors have WireWarning detection that indicates when the tool is in the vicinity of live AC voltage. Tools with the WireWarning detection feature continuously detect hot electrical wires (unshielded) up to 2 inches deep while you are scanning for studs or metal. The WireWarning detection is always on, in all modes, to alert you to the presence of hot, unshielded AC wires behind the wall. Depending on the model, either an LED light or an icon on the screen will appear when live AC voltage is being indicated.

In addition to WireWarning detection, some tools also have a dedicated AC Scan Mode. The difference between WireWarning detection and AC Scan Mode is the user interface. WireWarning detection is indicated by a light or icon that is either on or off. In AC Scan mode the bars on the LCD screen indicate when the tool is moving towards the source of the voltage or away from the source of the voltage. Both WireWarning detection and AC Scan Mode may indicate over a smaller or larger zone around the wire depending on conditions. Both features allow the user to interactively calibrate the sensitivity to AC voltage. If the unit indicates over a large area the user can re-calibrate the unit closer to the source of AC in order to reduce sensitivity so the unit will indicate AC over a smaller zone around the wire.

Question: What can this product do in terms of wire tracing?

Answer: Zircon tools with AC Scan Mode are not full featured wire tracers, however when users are mapping a section of a wall AC Scan Mode can assist them in locating the route a wire takes through that section of the wall.

Question: Where can I get help using my MultiScanner?

Answer: Technical Support is available Toll Free on our Customer Support Number 8:00am – 5:00pm Mon – Fri PST or on the Zircon Website.

Product description

Upgraded 5 in 1 stud finder from JAXWQ provide users with more wider detect performance, more accurate and deeper detect range.



1.Feature:

Ergonomic anti-slip handle provide comfort and control of the tool.

Intelligent Microprocessor chip, get the most accurate and fast results

HD graphical LCD display Audio Alarm

Auto-calibration function to provides users with maximum reliability.



2.How to use JURGEN K stud finder?

Step 1: Calibrate the tool before every scan

Choose the scan model at first, then place unit flat on the wall, press the power button to power on, press the Scan button(on the right side of the tool) to start calibration. Wait for the reducing bars disappears and beeps to confirm calibration has completed.

In stud/deep mode, put it on the wall where you want to detect to calibrate it ; In AC/Metal mode, put it in the air to calibrate it.

Note: It is important to wait for calibration to complete (2–3 seconds) every time.



Step 2: Start to scan

After Calibration, then moves the stud finder along the wall slowly, The narrow on the screen together with the beep signal alter, guides you to find the location of the stud.

Note:

1. if shake or lift the scanner coincidentally, the device needs to be re-calibrate.

2.if you can not scan the object from left to right, please try to scan up and down.



Step 3: Find the location of the stud

When the signal bar is full and the beep alarm is loudest, it means you have found the center of an object. Mark it with your pencil.

Then choose the Metal Scan mode to test whether it is a metal. After you confirm that it is not a metal, it means that you found the center of a stud.

• Accurate and Rapid: The stud finder adopts an intelligent micro-sensor chip with the highest sensitivity which can accurately and quickly find edges and center of metal, studs, joists, pipes, live AC wire behind walls, floors and ceilings. Fast detection saves users time and effort, making the task completion easier. No matter professionals, homeowner and DIY enthusiasts, it must be an ultimate choice.
• 5 in 1 Multi-function Detection: The upgraded 5-in-1 mode provides users with more detection needs. 1/2 inch scan mode locates the center and edges of wood and metal studs up to 1/2 inch deep; medium scan locates the center and edges of wood and metal studs up to 1 inch deep; Deep scan locates the center and edges of wood and metal studs up to 1.5inch deep; Metal scan detects metal (Ferrous and Non-Ferrous Metal) up to 2.36 inch deep; AC scan detects live unshielded AC wires up to 2 inches deep.
• Digital LCD Display & Audio Alarm: This stud finder comes with large LCD display and sound alarm, which can detect the exact location of the objects. When find the objects, the LCD display will indicate the direction and the intensity of beeping tells whether you are more close to the target. This LCD also features back-lit function which can provides a clear appearance even in low light conditions, indicating detection mode, center pointing, low battery indication ect.
• Easy to Use & Auto Calibration: Easy-to-read LCD display and ergonomic anti-slip handle provide users with comfort and convenience while scanning. The wall detector can be automatically calibrated anywhere on the wall to successfully find the center of studs in one step. This function provides maximum reliability to the user, greatly reduces errors in the application, and ensuring that most objects behind the wall can be detected.
• Wide Use: This stud detector quickly locates wood, metal and AC wires hidden in the walls, floors and ceilings of the house. It can work on different wall surfaces, such as lath, wallpaper wood flooring, acoustic ceiling, painted walls, etc. helping you avoid danger when installing TVs, cabinets, garage racks, etc.

User questions & answers

Question:	Can this unit locate studs through ceramic tile
Answer:	Yes, its accuracy left a deep impression on me.
Question:	Will it work on popcorn ceilings
Answer:	Yes, I successfully found the stud behind the wall.
Question:	Is it able to detect live wires in the wall
Answer:	/Duration -:-Loaded: 0%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:00 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } Please choose the mode you need, follow the instructions, super easy to operate.
Question:	Is it accurate
Answer:	/Duration -:-Loaded: 0%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:00 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } yes

Product description

Positively locates nails and screws with powerful "neodymium" magnets. The magnetic stud finder works like magic. It sticks to the wall leaving your hands free--no batteries, no calibration, no lights, no hassle. It works on wood or metal studs and uses multiple industrial strength magnets to “Field Vector” the stud. This is the last stud finder you will ever buy. Simply slide the flat surface of the magnetic stud finder slowly across a wall in a circular or "S" motion until you feel a strong pull to a nail head or screw. Once you have the magnetic stud finder directly above a nail head or screw, let it go and it sticks to the wall. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

• Small and compact, easily fits in pocket
• Powerful magnets allows hands-free use
• 2 way level for ease of marking
• No batteries required
• Soft grip for easy grabbing and gentle touch

User questions & answers

Question:	this sounds good for accurately finding the stud.but does it find the edge of the stud....can someone tell me pls
Answer:	No. You're going to have to guesstimate. It only finds the fasteners used to hang the stud. What I do is find multiple fasteners with the magnet and draw a line. Whenever I hang something I put the screw on that line. Never failed me yet.
Question:	Does this come packaged as 2 individual finders, or 1 packaged containing both
Answer:	One Amazon package. Two individual packages inside the Amazon package. Each individual package has one magnet.
Question:	Have you had any problems with these accidentally finding wires or conduits in the walls
Answer:	Wires, no. Metal conduit, yes. However I use it in commercial spaces and it's obvious if it finds conduit. There's power or another receptacle type nearby
Question:	Will they work on metal stud with 5/8 level 5 sheetrock
Answer:	Yes they will. I use it for that purpose everyday

Product description

From BLACK & DECKER, detects wood studs up to 3/4" thick. For ease of use, sensor lights and beeps when stud is detected. Requires two AA batteries (included). use for detecting wood studs. Orange with BLACK.

Black & Decker's Stud Finder is a simple, yet indispensable tool that detects the location of studs up to 3/4-inch thick. This compact, easy-to-use stud finder operates by moving over the surface of the wall. LED lights on the stud finder light-up to accurately indicate the location of studs.

From the Manufacturer

Black & Decker Stud Sensor takes the guesswork out of locating wood studs to hang pictures, install closet shelving, run chair railing and more. Whether you are a pro, do-it-yourselfer or decorator, this Stud Sensor will help you get the job done faster and easier. Stud Sensors detect studs through walls by sensing the differences in wall density between studs and the hollow spaces in your walls. This Stud Sensor has both audible and visual indicators that show when the edge of a stud is located. It is always best to hang shelves, photographs, artwork and other items securely into the studs in your walls. If these items are secured only in the drywall, nails and anchors can come loose under their own weight over time. With the diameter of a stud being less than 1-inch thick and studs being placed either every 16 inches or 24 inches, depending on the construction of your home, it isn't always easy to guesstimate a stud's location. Without a stud sensor you can only guess where studs may be hidden under your walls. This usually results in driving a nail or anchor between the studs in the empty spaces in your walls, leaving holes.

• Plastic
• Made in the USA or Imported
• Detects studs edge-to-edge up to 3/4" thick
• Leds Flash and the device beeps when studs are located
• Ergonomic design
• Included Components: AA Batteries
• Stud sensor with LED indicators for accurate stud locating

User questions & answers

Question:	I hae this model stud sensor and just put new batteries in it (twice) and it still will not light up. What can I do to make it work?????Tony
Answer:	Did you leave batteries in it while stored? If so, battery acid may have corroded contacts. You may have to replace it. Always store without batteries. I haven't had this issue yet. Just my experience with other electronics.
Question:	this black & decker™ sf100 wood stud finder works exclusively with wood studs
Answer:	Yes, SF100 detects wood studs in walls up to 3/4-inch thick.
Question:	Is this dishwasher safe
Answer:	No, it is not dishwasher safe.
Question:	Will this work on metal studs
Answer:	No, SF100 detects Wood Studs up to 3/4" thick.

Product description

The Pros Ensor 710 incorporates innovative stud sensing technology that instantly finds hidden studs. No sliding is required. This patent-pending detector senses the wall in thirteen locations simultaneously, then immediately illuminates the display elements that are in front of a stud. The Pros Ensor 710 is faster, less error prone and more accurate than other products on the market. It is the easy way to find studs. - advanced Multi-Sense technology senses the wall in multiple locations simultaneously and uses data from many readings to accurately determine the position of studs, operates effectively even through difficult architectural construction features (such as wall and ceiling textures, uneven plaster thickness, uneven paint, and difficult wallpaper, thick walls, etc. ) that can cause other detectors to fail. - bright LEDs lights illuminate to indicate the position of hidden objects – making it very easy to visualize the position of studs. - The only stud Finder available that does not require swipes across a wall to determine the location of studs, so that the readings are immediately accurate. - identifies the width of hidden objects so that you not only know the position of hidden objects, but so you also know the size of them. - can identify the position of multiple studs simultaneously. This is particularly useful for when there might be two or more studs in close proximity, which can often confuse conventional stud finders. - The Pros Ensor 710 has more sensor pad area than conventional stud finders and can sense more accurately through many real-world architectural features such as texturing, uneven plaster thickness, uneven paint, difficult wallpaper patterns, etc. - deep scanning is always active (up to 1. 5"). - The Pros Ensor 710 can be initialized at any position along a surface. - ergonomic soft grip.

• Advanced Multi-Sense technology senses the wall in multiple locations simultaneously
• Bright LEDs lights illuminate to indicate the position of hidden objects - making it very easy to visualize the position of studs
• Identifies the width of hidden objects so that you not only know the position of hidden objects, but so you also know the size of them
• Can identify the position of multiple studs simultaneously
• Deep scanning is always active (up to 1. 5")

User questions & answers

Question:	how well over thick second floor carpet
Answer:	the studpop doesn't respond to electricity at all. But since the studpop is looking for actual metal fasteners, when it does find one, it's a good bet that it's not in a wire.
Question:	Will this detect studs behind plaster and will it detect wires
Answer:	3/4" might be pushing it but that also seems awful thick for plaster over lath. IT always works for me on L & P
Question:	can this alert you to AC runs in t he wall
Answer:	The studpop was designed to work on any kind of wall. Sheetrock, plaster, lath and plaster, tile. That's the guarantee. If it doesn't appear to be working then it's either defective or you're not using it right. In either case contact the company and they'll figure it out. Being a new company with a very new product, they are very eager to please ; )
Question:	Can you find studs thru exterior stucco or wood siding? Thanks
Answer:	We don't have popcorn textured ceilings. I think ours are called slap brush, and it definitely does stay on them (I just tried it tonight to find out).

Product features

Franklin Sensors ProSensor 710

Unlike conventional stud finders which use only 1 or 2 sensors, the Franklin Sensors ProSensor 710 and 710+ use 13 sensors simultaneously to detect studs. This multi-sense technology eliminates the calibration step other brand stud finders require. Just put it on the wall and press the button. It's quick and easy.

The ProSensor 710 and 710+ can detect multiple studs simultaneously. they accurately display the center and edges of a stud at the same time. Made in the USA.

Product description

The StudSensor A100 is Zircon’s newest edge locating electronic stud finder that is sold exclusively on Amazon. The A100 is designed with a smooth, ergonomic rubber grip allowing for a comfortable yet secure hold for any size hand, at any angle. This stud finder uses the most recent technology in density detecting software and circuitry. The scanner has 2 scanning modes to locate the edges of wood and metal studs and joists behind walls, floors, and in ceilings up to 1.5 inches (38 mm) deep. In StudScan Mode, the SS A100 locates the edges of shallower wood or metal studs up to 0.75 of an inch (19 mm) deep. Switch over to DeepScan Mode to double the scanning depth to 1.5 inches (38 mm). This stud sensor is programmed with a Wire Warning Detection feature that indicates the presence of live unshielded electrical wires up to 2 inches (50 mm) deep when using either stud scanning modes. Finding studs using this edge finding tool is simple. To get started, install one brand new 9V alkaline battery (not included). Place the unit flat against the wall and press the Power Button to calibrate the sensor. Once you hear a beep indicating calibration is complete, continue to hold the Power Button and slowly slide the tool across the surface. The easy-to-read LCD will alert you as the stud detector approaches the edge of the stud in both scanning modes. Once the edge is detected, the patented arrow-shaped SpotLite Pointer will shine, the translucent base will illuminate, and an audio tone will sound. DO NOT DRILL HERE! Instead, mark the spot in the “V’ marker groove at the head of the tool and continue past the stud. Repeat the process in the opposite direction and mark the opposite edge of the stud. The center of the stud is midway between the two marks. Make sure to note whether the Wire Warning Detection is alerting you to live, unshielded AC wiring before drilling between the two marks into the center of the stud. With the Zircon StudSensor A100, you can safely maneuver through the most complicated of projects with the professional confidence that comes from owning a Zircon.

• The Zircon SS A100 electronic stud scanner is sold exclusively on Amazon and detects the edges of wood and metal studs up to 1.5 inches (38 mm) deep
• Wire Warning Detection indicates the presence of live, unshielded electrical AC wiring while scanning in StudScan and DeepScan modes
• Patented "over the stud" indicator and spotlite pointing system ensure the A100 provides trustworthy results
• Ergonomically designed grip allows a comfortable hold on the tool for any size hand, at any angle
• One fully charged 9V battery, not included, is required for the stud scanner to run at optimal performance to help you easily find studs and avoid hazards

User questions & answers

Question:	Does it detect ceiling joist
Answer:	Hello Donna. Yes, the A100 will locate ceiling joist. Thank you.
Question:	What is the difference between e50 and A100? And which is better? Thanks
Answer:	All i know is that e50 did not work for me. I tired both settings and gave me fake results. Directions are simple. Did not work. I drilled into space.
Question:	Would this work on bathroom/shower tiles? Trying to install grab bars in the shower area
Answer:	Hello Ashley. No, while the A100 can scan through tile sometimes the layers behind the tile, the hardi-backer board and glue, can be problematic. We recommend using the A200 on bathroom tiles. The A200 has an additional metal scan feature on it, if you are not able to get a consistent reading using the Studscan or Deepscan mode you can use the metal scan feature on this tool to find the nails holding the wall boards in the studs. Thank you.
Question:	will this signal if there is a stash in the wall also, just like studs
Answer:	haven't come across one in my walls yet.

Product features

Zircon StudSensor A100

The SS A100 is a handheld tool dedicated to quickly and efficiently find the edges of studs and alert you of live AC wiring. The A100 comes equipped with 2 scanning modes: StudScan and DeepScan.

Locate Studs and Scan for Live AC Wiring Safely and Efficiently

The Zircon StudSensor A100 makes scanning easy with its newly designed ergonomic grip. The tool's StudScan finds shallower wood or metal studs up to 0.75 in. (19 mm) deep. Slide the Mode Selector Switch to DeepScan Mode. This doubles the scanning depth to 1.5 in. (38 mm) deep and allows for increased accuracy on deeper targets.

The A100 also includes WireWarning Detection that automatically operates in StudScan and DeepScan Modes. This safety feature alerts you to the presence of live, unshielded electrical AC wires while scanning for studs.

Before use, always be sure to install a brand new 9V alkaline battery. Zircon stud finders, particularly those with screens, require and consume a great deal of current from batteries. For optimal performance, brand-new, recently purchased alkaline batteries with an extended expiration date, are strongly recommended for use in these tools.

Edge Finding

Before scanning, hold the A100 flat against wall and press the Power Button to calibrate. Be sure not to move the scanner while calibrating. After a short beep sounds, confirming calibration is complete, continue pressing the Power Button and slide the scanner slowly against the surface.

Be sure not to drill at the edge of the stud. Continue to scan the surface until the stud's center is detected.

The easy-to-read screen will alert you as the stud detector approaches the edge of the stud in both scanning modes. Once the edge is detected, the patented arrow-shaped SpotLite Pointer will shine, the translucent base will illuminate, and an audio tone will sound. DO NOT DRILL HERE! Instead, mark the spot in the “V’ marker groove at the head of the tool and continue past the stud. Repeat the process in the opposite direction and mark the opposite edge of the stud. The center of the stud is midway between the two marks.

The center of the stud center is the stud's most secure location. It is critical to drill in the center when mounting heavy objects.

StudScan and DeepScan Modes

Use StudScan Mode to find the edges of wood or metal studs up to 0.75 in. (19 mm) deep.

For best results, always start in StudScan Mode when looking for studs.

If StudScan Mode provides irregular readings the studs might be behind deeper than 0.75 in. (19 mm). Slide the Mode Selector Switch to DeepScan Mode. This doubles the scanning depth to 1.5 in. (38 mm) deep and allows for increased accuracy on deeper targets.

Note: WireWarning Detection works in both StudScan and DeepScan Modes. The WireWarning Detection Icon will flash when live, unshielded wires are detected.

WireWarning Detection

Safely Scan in both Modes

WireWarning Detection is a feature that is always on while scanning in StudScan and DeepScan Modes.

It alerts you to the presence of live, unshielded, electrical AC wires up to 2 inches (50 cm) deep.

As you approach an area with live AC voltage, a lightning bolt icon will display on the screen. This the WireWarning Detection Icon. If your scan directly starts over an area with live AC voltage, the WireWarning Detection Icon will flash.

Note: Please turn off the electricity and use extreme caution in areas where live AC voltage is detected before nailing or drilling.

Frequently Asked Questions

Question: Does the StudSensor A100 include a battery?

Answer: No. Zircon stud finders and detectors, particularly those with screens, require and consume a great deal of current from batteries. For optimal performance, a brand-new, recently purchased 9V alkaline battery with an extended expiration date, is not included but is required to properly power the A100.

Question: I inserted a 9V battery, but the tool doesn't turn on or is giving me strange readings. Is my tool broken?

Answer: Please be sure to use a fresh, brand new 9V alkaline battery with an extended expiration date. Batteries that may work in a smoke detector or remote control may not have adequate voltage to power the sensing technology in StudSensors.

Question: Does this tool need to be calibrated?

Answer: Yes, as with all Zircon tools, the StudSensor A100 needs to calibrate to the surface before scanning. Calibrating the tool on an empty wall gives the device a chance to measure the wall thickness and material density, as well as register factors like humidity, temperature, and even the minor electric readings from your hand, which all have an impact on the readings from the wall. Calibrating is easy and just takes a second. To calibrate, simply place the unit flat against the surface to be scanned and press the Power Button. When powering the A100 on, all the icons on the screen and the SpotLite Pointing System will briefly flash and the tool will beep. After this occurs, the screen will then clear and, depending on the selected mode, the words "StudScan" or "DeepScan" will remain, indicating that calibration has occurred and the tool is ready to begin scanning. It is important not to move the tool or begin scanning until the calibration process has taken place for the most accurate results.

Question: What is DeepScan Mode?

Answer: Unlike StudScan Mode, which scans through one layer of drywall up to 0.75 in. thick (19 mm), DeepScan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. DeepScan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. Extra layers in a wall can make it difficult to find studs in regular StudScan Mode. To minimize false positives and/or finding other objects further behind the wall that may not be a stud, always start your scan in StudScan Mode first.

Question: How can I be certain the objects found behind my wall are studs in DeepScan Mode?

Answer: DeepScan Mode has increased sensitivity so you may have located something other than a stud. Studs are equally spaced to either side (12, 16, or 24 in. apart) and typically run from floor to ceiling. To better confirm that what you found is a stud, check for other studs equally spaced to either side and for the same stud at several heights directly above and below the first stud indication. A stud reading would also measure approximately 1.5 in. (38 mm) apart from each edge. Anything larger or smaller may not be a stud if not near a door or window.

Question: Will this StudSensor A100 locate metal studs?

Answer: Yes, the A100 will locate metal studs in StudScan, DeepScan, and Metal Scan Modes. Since stud finders are looking for a change in density behind drywall, not a particular material, in StudScan and DeepScan Modes the detector will react to metal studs the same as it would for wooden studs. The A100 will locate wood and metal studs up to 0.75 in. (19 mm) deep while DeepScan Mode locates targets up to 1.5 in. (38 mm) deep.

Question: Why does the tool beep and the lights flash when scanning for a stud?

Answer: The tool could've been calibrated over a stud, calibrated on a dense part of the wall, or the back of the unit may have slightly lifted or tilted during the scan. Move the StudSensor A100 over a couple of inches to the left or right, re-calibrate, and start your scan again.

Question: What is WireWarning Detection?

Answer: WireWarning Detection is a feature that is always on while you are scanning in StudScan and DeepScan Modes to alert you to the presence of live, unshielded electrical AC wires up to 2 in. (50 mm) deep. As you approach an area with live AC voltage, a lightning bolt icon will display on the screen. This is the WireWarning Detection Icon. If your scan directly starts over an area with live AC voltage, this icon will flash. PLEASE TURN OFF THE ELECTRICITY AND USE EXTREME CAUTION IN AREAS WHERE LIVE AC VOLTAGE IS DETECTED BEFORE NAILING OR DRILLING.

Question: Why does the area of voltage appear much larger than an actual wire?

Answer: Static charge may develop on drywall, spreading voltage detection as much as 12 in. (30 cm) laterally from each side of an actual wire. To narrow detection, turn the tool off and on again at the edge of where the wire was first detected and repeat the scan.

Question: I suspect electrical wires in a certain area when I scan, but why am I not detecting any?

Answer: Wires may be shielded in metal conduit or behind a metallic wall covering. It could also be that the wire is deeper than 2 in. (50 mm) or that the wire may not be live (hot). Always exercise extreme caution when working near electricity.

Question: Does the A100 work on wood paneling and other wood surfaces?

Answer: The A100 is optimized to scan through standard interior sheetrock / drywall (gypsum) construction. This tool will work on wood, plywood, wood paneling and particle board up to 1.5 in. (38 mm) thick when in DeepScan Mode.

Question: Will the A100 work on textured wall surfaces, acoustic ceilings, or wall paper?

Answer: Yes, the A100 will work on textured surfaces and dried wall paper as long as it does not contain any metallic foil or fibers. For highly textured walls or acoustic ceilings, place or tape a thin piece of cardboard onto the surface to be scanned. Recalibrate and scan over the cardboard in DeepScan Mode.

Question: Can I use this tool to find studs behind carpet?

Answer: No. Zircon tools are designed for hollow interior walls. They will generally work well to find studs or joists through a plywood subfloor, after the carpeting/flooring has been removed.

Question: Will the A100 work on ceramic tile?

Answer: While the StudSensor A100 may be able to scan through ceramic tile in DeepScan mode to locate studs, the many variable layers behind tiled surfaces make it one of the more difficult scanning environments.

Question: Does this StudSensor work on lath and plaster?

Answer: No. Due to irregularities in plaster thickness, this tool is not recommended for use on lath and plaster.

Question: Can I use this tool to scan the outside wall of my house?

Answer: No. Zircon StudSensors are designed and recommended for interior use only.

Question: I'm planning to mount my new flat screen TV to the wall. Will this tool help me?

Answer: Yes. The A100 is ideal for basic home or office projects. The center-finding technology allows you to easily find and mark the center of the stud for secure mounting of TV's and AV equipment, closet or garage shelving, heavy mirrors, light fixtures, coat racks and more.

Question: Is the tool waterproof?

Answer: No. The StudSensor A100 is splash and water resistant, but not waterproof.

Question: What is the difference between magnetic and electronic stud finders?

Answer: Magnetic stud finders are simply magnets that look for anything magnetic behind a wall. Typically, they are advertised to find screws or nails that hold the wall surface to the studs. However, nails often times are not placed in the center of studs, making it difficult to determine where the stud's center is or how wide the stud is.

Electronic stud finders, such as the A100, on the other hand, operate by detecting density changes behind a surface (like a wall) and will clearly and precisely indicate the edges and center of a stud. The center of a stud is the most secure location when mounting anything heavy. For applications like mapping out floor joists, electronic stud finders have an advantage over magnets because they are not attracted to nails holding floor boards to a subfloor, as well as nails in joists.

Question: Does the StudSensor A100 come with a warranty?

Answer: The StudSensor A100 includes limited one year warranty when fulfilled by and shipped from Amazon.

Question: Where can I get help using my StudSensor A100?

Answer: Zircon's team of Tool Pro Experts provide superior customer service. They know the ins and outs about tools, construction, and the challenges that DIYers and professionals face. Rest assured, at Zircon you can reach live, knowledgeable, honest people who want to work with you. Call the toll free Customer Support Number 1-800-245-9265 Monday - Friday, 8 AM - 5 PM PST to speak with an expert today.

Zircon also provides support via an online 24/7 interactive support center, step-by-step instructions, how-to videos, and online engagement. Visit Zircon's website today.

Product description

Franklin Sensors has built its reputation on professional-grade stud finders that give you accurate readings. The ProSensor T13 doesn't waste your time with calibration procedures or inaccurate readings. Just press the button and scan to find studs instantly. The handy LED display shows the center and edges of studs.

User questions & answers

Question:	Does it works on concrete
Answer:	110
Question:	does it work on the outside walls that are stucco ? considering that stucco is being hold with the chiken wire
Answer:	Yes it welds with flux core wire. It plugs into a 120 volt outlet. It comes with both flux core wire and solid wire.
Question:	Locates rafters through asphalt shingles
Answer:	This welder will certainly work, in that it will join two pieces of tubing, but you may want to check the race association roll cage rules. I think some race associations require TIG. If so, this is NOT the welder for you.
Question:	what is the difference between prosensor T13 and procensor
Answer:	Supplies is what you need, the Lincoln Mig 140 comes with all the basic parts, and supplies to get you started welding, it comes with two spools of wire, one type of spool wire (0.25) that the MIG 140 comes with, requires the use of C-25 gas bottle from your local welding supply store. You can get started without the gas using the flux core wire that is supplied with the Lincoln MIG 140, Leather welding gloves, a good welding shield helmet protects and help's you better see your work, wire brushes, and welding shirt to help protect you.
Question:	Is it 110 plug or
Answer:	will this work for lincoln 180 hd
Question:	Can this do flux core and plug into a standard 120 outlet
Answer:	The Magnum Pro fits the Lincoln LE31MP welder. For your 140 welder you would want the Magnum model K2532-1.
Question:	can i use this to weld a roll cage into a rally car? serious question im trying to live out my dream
Answer:	This comes with a drive roll for both .035 and .045 wire. It will include 2 tips., the regulator and gas hose.
Question:	what other parts or supplies will i need
Answer:	No, the 350 MP would be the push/pull model.

• The Most Accurate & Improved Safety - Tavool specializes in stud finder for years and adopts the most Advance Sensors Technology for accurately & quickly locating studs wood metal AC wires!For Safety, in all modes, this wall scanner always detect and indicate the Live AC Wire. Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in this electronic stud scanner
• 5 IN 1 Multiplication Plus Deep Detection - This digital wall scanner includes four different scanning modes for woods, beam, joist, metals, AC wires and deeply embedded objects behind floor, ceiling, wall. Stud mode detects wooden beams and joists in drywall up to 1.2 inches. Metal mode detects pipe , rebar, aluminum and copper up to 1.57 inches.Deep mode detects wood and metal parts located up to 1.77 inches while 85~240 volt AC current for voltage and live electrical lines up to 2.36 inches
• Upgrade Design of LCD Screen - Displaying the Desired Stud Material As Well As the Precise Position of the Stud - The Tavool digital stud scanner features large LCD display together with the big sound warning to detect the accurate location of the objects. When find the material, the LCD display will indicate the direction and the intensity of beeping tells whether you are more close to the target. The fast detection saves users time and efforts, making the task completion EASIER
• Automatic Calibration and Ergonomic Grip for Comfortable Use - Turning on the stud finder and Completing Calibration until the BEEP sound and screen shows disappear. The automatic calibration before using provides users with maximum reliability and accuracy. Then put it on the wall. The wood beam finder will flash and beep once it has picked up the edge of a stud.The ergonomic design of this wall stud finder makes it comfortable to hold from any angle
• WHY RECOMMEND TAVOOL STUD FINDER TO YOU: Tavool has been dedicated to Research and develop stud finders for many years, and we have a professional team and mature productions process. Tavool stud finder not only gives you top quality and great accuracy, but also provide muti-functions to meet your practical needs on drywall, lathe wall, ceiling, plasterboard wall, wallboard etc.

User questions & answers

Question:	Can this see behing plywood
Answer:	I would guess it wood depend on the thickness of the plywood, I just scanned 1/4 inch over Sheetrock and it read metal and wood studs
Question:	I have sheet metal roof and I want to find the purlins under the steel will this find find them
Answer:	Not sure, the purlins can be wood or metal, I honestly don’t know it the stud finder would basically work in reverse, scanning on metal to find wood or metal purlins supports. Sorry that I could not help on this. This scanner works great on everything I have thrown at it, but have not tried scanning on metal to find wood or metal.
Question:	Is it works for water and 'PVC/plastic pipe
Answer:	No it will not work for plastic pipe.
Question:	Can it find nails in wood before I plane the wood
Answer:	Yes if the scanner is properly collaborated for sensing metal materials such as nails, plumbing and electrical wiring.

Product features

Stud Scan Detection

This stud locator has 3 stud scan modes. Deep Scan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. DeepScan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. To minimize false positives and/or finding other objects further behind the wall that may not be a stud, always start your scan in StudScan Mode first.

Metal Scan Detection

This stud locator has 3 stud scan modes. Deep Scan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. DeepScan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. To minimize false positives and/or finding other objects further behind the wall that may not be a stud, always start your scan in StudScan Mode first.

Wire Warning Detection

Wire Warning detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51 mm) deep. For Safety, in all modes, this wall scanner always detect and indicate the Live AC Wire.

Note: WireWarning Detection works in both StudScan / DeepScan / MetalScan Modes. The WireWarning Detection Icon will flash when live, unshielded wires are detected.

Step 1:Calibrate the tool before every scan

After choose the mode, press and hold the scan button( on the side of the tool) to calibrate this tool. Wait for the reducing bars disappeared and beep to confirm calibration has completed.

In stud/deep mode, put it on the wall where you want to detect to calibrate it ;In AC/Metal mode, put it in the air to calibrate it.

Step 2: Scan the wall

Hold down the button, then move the stud finder along the wall slowly, if shake or lift the scanner accidently, the device needs to be re-calibrate.

The narrow on the screen togather with the beep signal alter, guides you to find the location of the stud.

Step 3: Find the location of the stud

When the signal bar is full and the beep alarm is loudest, it means you have found the center of an object.Mark it with your pencil.

Then choose the Metal Scan mode to test whether it is a metal. After you confirm that it is not a metal, it means that you found the center of a stud. (More details refer to the above description of "Metal Scan Detection")Then you can drill it to hang thing

• ★【5 in 1 Multi-Function Mode】Compared with other stud sensors, Meterk stud finder not only featuring detection for wood stud exact mode, wood stud deep mode, metal objects mode (iron and non-ferrous metals), copper conductors mode (live), but also detection for moisture in the wood and building materials, offering a wider range of detection performance
• ★【Locate the Center of Stud !】Meterk stud finder can be used to find the center of the stud in just once the operation. When the stud sensor is approaching the center of the stud, the signal strength will increase and accompany the sound. At the center, the center icon "+" will appears and the signal strength shows 100% full on the screen. However, other products need to be operated twice in the left and right direction to find the center by looking for the edge of the stud
• ★【Wood Exact/Deep Mode】Stud sensor can detect metal, wood and live cables in walls, ceilings, and floors. Wood exact mode scans through one layer of drywall up to 0.79 inches (20mm) thick. Deep mode scans through 2 layers of drywall up to 1.50 inch (38 mm) deep. Deep stud scan mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard
• ★【Convenient Design】Meterk sensor detector has a mute setting, which is very convenient for those who think that the alarm sound is annoying or use it somewhere in the library. This sensor detector has a large LCD display, the backlight function supports to detect studs even in dark environments. Whether you are a professional, a homeowner or a DIY enthusiast, you can find good uses in it
• ★【Make Your DIY Homework Easier !】 This wall detector quickly locates the center of the material, helping you avoid danger when installing TV, cabinets, garage racks, and more. The ability to measure the moisture content of wood and building materials can be of great help in wood processing, water damage repair, and home renovation. 1 x Meterk stud finder, 2 AAA battery, 1 x portable bag, 1 x user manual, 1 x warranty card( 24 month ).

User questions & answers

Question:	Can this detect roof rafters through roof shingles
Answer:	No dosent work
Question:	What is the moisture detection function
Answer:	It can detect moisture in wood and building materials and provide better service to more DIY workers.
Question:	How about the product warranty
Answer:	24-month warranty and you can contact them if stud detectors have quality problems occur during the warranty period.
Question:	What are the maximum depth of the metal tube and copper conductor
Answer:	copper conductors(live): 50mm /1.97 inch, ferrous metals: 60mm /2.36 inch, non-ferrous metals(copper): 50mm / 1.97 inch

Product features

Step 1

* Short press the power button on the Meterk stud sensor.

* Short press the wood detection mode button to enter the wood stud detection mode, the wood detection mode is the exact model.

* Long press this button to switch to the wood deep detection mode.

(The maximum detection depth of the "exact" mode is a 20mm/0.79 inch, and the maximum detection depth of the "deep" mode is 38mm/1.50 inch).

Step 2

* When the stud sensor starts to approach the stud, it will always be accompanied by a sound, the signal percentage scale on the right side of the screen will gradually increase, and the distance will be displayed on the screen will gradually shorten.

* When the positioning symbol "+" appears on the screen, indicating that the center of the stud has been found, mark it with the pen at the groove.

* Note! At this time, you cannot directly drill in the second step!

Step 3

* Since Meterk stud sensor is looking for a change in density behind drywall, not a particular material. In stud scan and deep scan modes the detector will react to metal studs the same as it would for wooden studs.

* To ensure that the object detected in the second step is a wood stud, switch to the metal mode for testing again. In the metal mode, if nothing happens on the screen, it means that the object found by the second step stud sensor is wood.

* At this time, you can rest assured and start your DIY and drilling work !

Metal / AC Wire Scan Detection - Avoid the Metal / Wire Behind the Wall for Punching

Step 1: When the Meterk stud sensor is close to the metal/wire, the display scale bar on the screen will gradually rise and make a sound, when the distance displayed on the screen becomes at 6cm, it means that the product has started to detect metal. At this time, it should be marked with a pen at this position, and the mark point is "1" (as shown).

Step 2: The stud sensor will continue to move from the marker point "1" position for a distance, and the distance displayed on the screen will be shortened. When the center icon "+" appears on the screen, it represents metal/ The wire is positioned just below the center of the stud sensor.

Step 3: When the instrument is slowly moving away from the object, the display scale will slowly drop and the distance displayed on the screen will become 6cm again. At this position, mark it again with the pen and mark it as “2” (as shown). .

Step 4: There is a metal/wire in the area formed between the marked points "1" and "2".

Note: Before starting the drilling work, you should avoid this area!

Moisture Measurement

• Meterk stud sensors measure the moisture of wood and building materials. If you need to freeze this value, just press the "HOLD" button.
• Wood moisture measurement range: 5%-50%/±2%, building materials: 1.5%-33%/±2%. (There are two test pins at the bottom of the instrument)

Mute Setting

• Press the 1 and 2 buttons at the same time tset the sound to mute. There for people who think the alarm sound is annoying or to use it in someplace like a library.

Make Your DIY Homework Easier!

• This wall detector quickly locates the center of the material, helping you avoid danger when installing TV, cabinets, garage racks, and more. The ability to measure the moisture content of wood and building materials can be of great help in wood processing, water damage repair, and home renovation.