11 best moisture meter pinless

Product description

General's Non-Penetrating LCD Moisture Meter with Tricolor Bar Graph is ideal for DIY enthusiasts, woodworkers, contractors, building inspectors and water damage remediates. Includes 1 9V battery and user's manual. 1 Year Warranty.

GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools.

For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction.

WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS

• DETECT MOISTURE- Determine the moisture content of softwood, hardwood and other building materials (like drywall and masonry) or check water damaged areas to see if moisture is still present
• PROTECT WORK SURFACES - there are no pins on this tool, so your walls and projects can be saved from pinholes, scuffing and scratching to figure out their moisture levels
• VISUAL AND AUDIBLE ALERTS - if you’re looking for the source of a leak behind your work surfaces, listen for the high pitch tones to give you an accurate read on where moisture is most concentrated or quickly see using the tricolor LED moisture indicator
• DEEP READS - even without pins, this tool can read the moisture levels up to a 3/4 inch deep into the surface with an overall Measurement range of 0 to 53% for softwood, 0 to 35% for hardwood and relative readings for wallboard and masonry.Operating temperature: 32° to 122°F (0° to 50°C) @ <80% RH
• EASY TO READ AND USE- Auto-calibrating, 2-inch diagonal backlit LCD screen and a 3-color LED bar graph, HOLD button, auto power-off function, out of range alarm and low battery, 9V battery included
• FIRST STEP IN MOLD PREVENTION - by checking suspicious water stains with a moisture tester around the house, You can determine whether the area is wet (a perfect breeding ground for mold) or has long since dried

User questions & answers

Question:	Can this be used to locate a leak behind drywall. The drywall is not showing wetness so the water is probably running down a stud or outside wall
Answer:	The laser level is amazing I’m very happy with it. It helped me a lot with my work especially with tiles and hanging up pictures
Question:	Can this be used on concrete and drywall
Answer:	Yes, our laser level is suitable for laying tiles on the floor or wall. If you turn on all lasers, it can indeed give you several 90-degree angles at the same time.
Question:	I had a leak inside a wall that came from an outside source. I would like to check for moisture on drywall and wood behind wall. Is that possible
Answer:	There is a portable plastic toolbox that can hold all accessories and laser level, which is a great design. There is protective foam installed inside the tool box, so you don't have to worry about accidentally dropping it and damaging the laser inside. The case fully protects the laser!
Question:	What's the probe length? Are they insulated or replaceable
Answer:	Actually I don’t think there are any differences in function of the laser but they are different. I think the Huepar brand was introduced into the market earlier and accumulated more reviews, which resulted in customers willing to pay a higher price for the laser. I like my laser level very much and it works great.

Product features

Water Damage is the First Sign of Mold

Finding moisture is the first step in early mold prevention. High levels of moisture that go untreated are the main cause for harmful mold growth in the home.

With the MMD7NP pinless moisture meter by General Tools, scanning large areas of drywall and wood is easy with the pinless pad sensor. Quickly determine where your major problems areas are without making pin holes in your walls.

Worried about a leak? This meter can help you track it to its source. This can also be a great help in flood damaged homes. Use it to find where the water line truly stops so that you can remediate and stop future damage.

Product description

Klein Tools ET140 Moisture Meter is designed to non-invasively detect hidden moisture content up to 3/4-Inch (19 mm) depth. Easily select between materials with mode button to test surface of drywall, masonry, hardwood, and softwood. The ET140 has easy viewing with bright, reverse-contrast display and LED bar graph. Pinless moisture detection in drywall, masonry, hard and softwood. Non-invasive EMF technology detects moisture up to 3/4-Inch deep. Moisture Meter has bright reverse-contrast display to read easily. Hold, Low battery, and Auto-Power off functions. Built to withstand a 6.6 foot (2 m) drop. Includes detector, 9V battery, and instruction manual. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857.

• Pinless Moisture Meter with electromagnetic field (EMF) technology allows for nondestructive detection of moisture content in building materials
• Drywall tool detects moisture content up to 3/4-Inch (19 mm) deep
• Easy viewing with bright reverse-contrast display
• Nine LED bars indicate moisture range
• Easy-to-select materials with mode button; drywall, masonry, hardwood, and softwood

User questions & answers

Question:	Does this also measure moisture in the air
Answer:	This tool will measure the moisture content of any building material including wood and drywall. If the test indicates a high moisture content in just one spot, you could probably conclude that there was a leak at that point.
Question:	I'm having trouble finding the locaton of a water leak in my car. WIll this work on my cars carpet and or headliner fabrics etc
Answer:	Yes, the device has four modes. Wall, masonry, soft wood, hard wood. Wall is drywall.
Question:	Is there a way to set measurement depth
Answer:	That is the same reason I purchased this unit. It worked great and I was able to see how much wall needed to be opened up.Well worth the money.
Question:	Is this an authentic Klein Tools product
Answer:	As far as i can tell the probes are about 3/8 long. The are metal, and have a plastic cover to protect them and you when not in use. The cap can also be flipped over once taken off, to help check device itself, for calibration. They are replaceable. They actually come with an extra set of pins (probes). Hope this helps.

Product features

Pinless Moisture Meter for Non-Destructive Moisture Detection in Drywall, Wood, and Masonry; Detects up to 3/4-Inch Below Surface

Klein Tools ET140 is designed to non-invasively detect hidden moisture content up to 3/4-Inch (19 mm) depth. Easily select between materials with mode button to test surface of drywall, masonry, hardwood, and softwood. The ET140 has easy viewing with bright, reverse-contrast display and LED bar graph.

Product description

The MM8 Pinless LCD Moisture Meter with Tricolor Bar Graph is ideal for measuring the moisture content of wood and construction materials.

DETAILS

• Digital moisture meter features a hi-visibility white on black screen providing easier readability from any angle

• Improved ergonomic handle design conforms to your hand for a more comfortable user experience

• Moisture tester has separate settings for drywall, masonry, softwood and hardwood

• Non-invasive capacitive sensing technology

• Stops mold before it starts with early detection of moisture; essential water damage tool

• Auto calibrating

• 3 -color LED bar graph

• Reading HOLD button

• Auto power off

• Separate out-of-range alarms for wood and building materials

SPECIFICATIONS

• Measurement ranges: 0 - 53% for softwood, 0 to 35% for hardwood, relative readings for wallboard and masonry

• Measurement accuracy/resolution: ± 4% for hardwood and softwood

• Measurement resolution: 1 %

• Maximum sensing depth in wood: 3/4 in (19mm)

• Sensor size: 1.5 x 1.5 in (38 x 38mm)

• LCD size: 2 in (51 mm) diagonal, with three 0.5 in. (13mm) high digits

• Out-of-range alarm levels: >17% for wood, > 70% for drywall and masonry

• Bar graph composition: Three each green, yellow and red LEDs

• Auto power off: After 2 minutes of inactivity

• Operating temperature: 32° to 104°F (0° to 40°C) @ 5 to 95% RH

• Weight (without battery): 5.4 oz (152g)

• Power source: "9V" battery (included)

DIMENSIONS

6.3 x 2.8 x 2.9 in. (160 x 70 x 73.5mm)

INCLUDES

• Battery

• 1-year limited warranty

GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools.

For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction.

WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS.

GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools.

For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction.

WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS

• MEASURES- Separate settings for drywall, masonry, softwood and hardwood
• NO DRYWALL DAMAGE- Non-marring sensing technology protects drywall
• EASY TO READ- LEDs clearly indicate moisture level
• HI VISIBILITY SCREEN- Large 2 inch (50mm) backlit white on black screen providing easier readability from any angle
• FIND MOLD- Stops mold before it starts with early detection of moisture; essential water damage tool
• ERGONOMIC- Improved ergonomic handle design conforms to your hand for a more comfortable user experience

User questions & answers

Question:	Just got a used one on amazon here. there are no instructions. also it has no battery
Answer:	I bought the dr.meter specifically to check installed drywall in non-pin mode. I didn't even see a way to "calibrate" the meter. I tested it on a known dry section of wall: the meter read 0%. Then I slid it over the suspected area and got readings varying from 15% up to 60% or so. That confirmed my suspicions. I cut out a big rectangle of the 3/4" drywall ceiling and it was quite wet inside, dripping. The open cell foam insulation was wet and spongy. The meter reading is instant and there is no apparent lag when moving. It even differentiates between different pieces of fruit. I tested some oranges, with readings of 40% to 55%, or so. It's a great device!
Question:	Does this item come with a case
Answer:	No, the pins are not replaceable.
Question:	Does it sense moisture through a painted surface or just the moisture content of the paint
Answer:	Please kindly be advised that you can choose the probe needling mode or the scanning mode. There are no pinhole marks will be left in the scanning mode. Thank you!
Question:	This meter is called pinless, but, according to the questions below it has pins. So is it pinless or does it have pins
Answer:	Most interior walls read 0%. Best way to judge your walls or ceiling is to take readings in other areas of the room. But yes 20% is high. Also make sure there is no metal in the wall like in the corners some house do have metal this will give you a false reading.

Product description

The General Tools MMD4E Pin-Style Digital Moisture Meter provides accurate moisture level reading to detect leaks, dampness and moisture in wood, walls, ceiling, carpet and firewood. It is an essential tool for assessing water damage and remediation efforts after flooding from storms, hurricanes, roof leaks or broken pipes to discover hidden water damage in floors, walls and under carpets. By checking suspicious water stains with a moisture tester around the house, you can determine whether the area is wet (a perfect breeding ground for mold) or has long since dried. This water leak detector also is helpful for new home inspections and home restorations, locating roof leaks or simply to ensure firewood is ready to burn. It also ensures the appropriate level of surface dryness before painting, sealing or treating wood or drywall. The moisture meter is easy to use: simply stick the stainless steel pins into the surface of what you are measuring in order to get a read-out. Overall measurement range of 5 to 50% for wood and 1.5 to 33% for building materials. The backlit, large, easy-to-read digits and clearly-designed LED alerts tell you immediately if the moisture content is high, medium or low. Plus, the moisture meter has audible high, medium, low alerts so you will be able to hear the level even if you are in a dark or awkward space where you can’t see the screen. The sturdy, ergonomic shape and rubber side grips allow for comfort even when using for multiple measurements. Every moisture meter also feature a hold function to freeze a reading to read later, auto power off and a low battery indicator. Every package includes extra 0.3 in. (8mm) stainless steel pins, a protective cap that doubles as a calibration checker and a “9V” battery.

SPECIFICATIONS • Measurement ranges: 5 to 50%WME (Wood Moisture Equivalent) for wood, 1.5 to 33% for building materials

• Moisture measurement accuracy/resolution: ±3%/0.1%

• Pin length: 0.3 in. (8mm)

• Wood moisture scales: 5 to 11.9% (low); 12 to 15.9% (medium); 16 to 50% (high)

• Building materials scales: 1.5 to 16.9% (low); 17 to 19.9% (medium); 20 to 33% (high)

• Display size and type: 99.9 count backlit LCD with 0.3 in. (8mm) high digits

• Auto power off: After 3 minutes of inactivity

• Dimensions: 6.0 x 2.6 x 0.8 in. (152 x 66 x 20 mm) • Weight: 3 oz. (86g)

• Power source: "9V" battery (included)

GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools.

For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction.

WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS

• DETECT MOISTURE- Determine the moisture content of wood and other building materials (like drywall) or check water damaged areas to see if moisture is still present
• FIRST STEP IN MOLD PREVENTION - By checking suspicious water stains with a moisture tester around the house, you can determine whether the area is wet (a perfect breeding ground for mold) or has long since dried
• ACCURACY- Stick the stainless steel pins into the surface of what you are measuring in order to get a read-out. Overall measurement range of 5 to 50% for wood and 1. 5 to 33% for building materials as well as low, medium and high moisture tones and colored green, yellow and red LED visual alerts
• EASY TO READ AND USE- Large 0. 3 in. (8mm) high digits in a backlit LCD display for quick and easy viewing plus a hold function to freeze a reading, auto power off and a low battery indicator
• INCLUDES- Extra 0. 3 in. (8mm) stainless steel pins, protective cap that doubles as a calibration checker and a “9V” battery

User questions & answers

Question:	made in USA
Answer:	Nathan, Thanks for the question. The Moisture Range on this Hand Held meter for CORN is 10 - 40%. However, the clear plastic funnel which is provided to assist with consistent filling of the test cell, will not work well on corn over say 25 - 30%. This is due to the lack of flowability in the higher moisture content. I would suggest that you still fill the funnel, but pour the sample back out the large end at just 1 - 2" above the test cell. EVERY TIME and at the same Rate. With this consistency, you would have much greater repeatability between different tests. I would also suggest using the feature to average three readings to allow for some fill variation. Hope that this has help with the operation of the meter. Tom Runyon Seedburo Equipment Co.
Question:	I have a wooden floor that is swelling little bit. I know I had a small water leak. Can this tool help me to check if there is moisture underneath
Answer:	Not on the standard instrument, but YES, Long Grain and Medium Grain Rough Rice have recently been added to the available Calibration list. These would need to be substituted on the list, for example, Oats and Milo could come off and we add in the Long Grain & Medium Grain Rough Rice. Just let us know at the time you place your order and we will make this substitution free of charge. Seedburo Equipment Co.
Question:	Can I use this product to rule out a plumbing leak under my concrete bathroom floor. The outer bathroom wall is concrete & paint is bubbling
Answer:	Es el mismo equipo, la unica diferencia es que el GACMINI2500 es mas preciso.
Question:	accuracy
Answer:	Thank you for your question. No, the GACMINI testers do not test frozen grains, only the GAC2500UGMA or GAC2500AGRI have the capability of reading this much lower temperature and compensating for this in the calibration. You can view a list of the available calibrations for the MINI testers at the following website: http://cal.dickey-john.com/calibrations.aspx Please let us know if you have any other questions - Kathy at Seedburo Equipment Company

Product features

Water Damage is the First Sign of Mold

Finding moisture is the first step in early mold prevention. High levels of moisture that go untreated are the main cause for harmful mold growth in the home.

With the MMD4E moisture meter, use the pin sensors to find the moisture content in your wood or drywall. This will help you know if you need to dry the existing materials or replace with brand new ones.

Quickly determine what level of remediation is needed to keep your family safe with the MMD4E moisture meter by General Tools!

• ▶【2-in-1 Moisture Meter】The 2-in-1 Dr.meter moisture meter offers ideal dual functions of pin-type and pinless scanning in one. The pinless scanning mode with non-invasive measurement is ideal for high-end wood and building materials. The pin-type mode with faster response and higher accuracy is great for all kinds of wood and building materials.
• ▶【Wide Measuring Range】Different measurement modes correspond to different measurement ranges. In the pin-type mode: wood: 5%-50%, building materials: 1.5%-33%, error range: +/-2%; In the pinless scanning mode: wood: 0%-53%, error range: +/-4%.
• ▶【Over-range Alert】There are four pinless scanning modes of softwood, hardwood, gypsum board and concrete. The general algorithm has been written into the user manual to reduce the redundant settings before use to facilitate customers. When the wood moisture exceeds 17% or the wall humidity exceeds 70%, the wood moisture tester will beep to alert you.
• ▶【Current Ambient Temperature Measurement】The Dr.meter intelligent wood moisture meter can not only measure the humidity of wood and building materials, but also it can measure 0-40 degree current environmental temperature with only +/-2 degree error.
• ▶【User-friendly Design】Designed with green backlight display, reading hold on function and measurement signal bar display for more intuitive measurement tips, the digital moisture detector is more user-friendly. A bonus nylon storage bag is provided to store the product conveniently.

User questions & answers

Question:	Does it need to calibrate
Answer:	No... this meter is for nondestructive detection of moisture content in building materials
Question:	Are the pins replaceable
Answer:	The meter is designed to test moisture of drywall, wood and masonry. It takes the reading at 3/4 deep. I've used on carpet over masonry, but not sure if it would work on carpet over steel. I'm thinking you will get a false reading.
Question:	Does this leave pin marks in the material like other pin versions
Answer:	There is not a way to change this
Question:	Have low ceilings in our bedroom & heard a drip when it was raining so bought this to detect moisture in drywall. Is spots of 20% normal? What is bad
Answer:	Yep

Product features

Pin Mode Gives Fastest Response and Best Accuracy

Pin-type mode with wide applications is suitable for all kinds of wood and building materials. Better still, it has both faster response and higher accuracy. Measuring range in the pin-type mode for wood is 5%-50% and for building materials is 1.5-33%. Plus, the error range is only +/-2%.

The Dr.meter intelligent wood moisture meter can not only measure the humidity of wood and building materials, but also it can measure 0-40 degree current environmental temperature with only +/-2 degree error.

With this meter, you will not only have a wood moisture meter, but also have a temperature meter!

Product description

The 7445 AccuMASTER Duo Pro Pin & Pinless Moisture Meter is ideal for helping you measure moisture content in hardwood, lumber, wood flooring, brick, concrete, drywall and plaster. Its dual-sensor system can help you speed up and improve your moisture detection using either its pad or pins. It’s the best of both worlds.

WOODWORKERS AND CRAFTSMEN -- can check moisture content percentage quickly and easily with the moisture meter’s dual function before purchasing or using lumber and hardwoods.

PRO AND DIY REMODELERS -- discover hidden water damage in floors, walls and under carpets due to roof leaks, flooding, burst pipes, underground seepage or other water sources. Locating high levels of moisture content can help you know where to repair to avoid further damage and to stop toxic mold or other health risks.

YOU CAN EASILY SEE -- AccuMASTER’s large, well-designed LCD display and always-on backlight means you can easily read it in dimly lit jobsites, lumberyards, workshops, or even at your wood pile at night. Plus, the Hold function lets you freeze a reading on the display for viewing at a more convenient angle.

USER FRIENDLY, SIMPLE TO UNDERSTAND – In pin mode firmly push the (replaceable) sharp, stainless steel pins into test material. Or, in pad mode place the back of the meter on the surface you want to test. The easy-to-read digits and clearly-designed icons tell you immediately if the moisture content is high, medium or low. Plus, there are optional audible alerts so you can hear the level even if you are in a dark or awkward space where you can’t see the screen. The sturdy, hand-friendly shape and rubber side grips let you take measurements in comfort.

EVERYTHING YOU NEED TO GET TO WORK -- The sturdy AccuMASTER XT Moisture Meter offers accuracy and user-friendly features. Includes a 9-volt battery, batter-saving auto shut-off (3 mins), User’s Guide and a one-year warranty.

Make sure your wood or building material is ready to use – click Add to Cart now!

Copyright 2019 Calculated Industries. All rights reserved.

• CHECK MOISTURE CONTENT QUICKLY AND ACCURATELY– detector offers ideal dual functions of pin and pinless sensors in one. Use the pinless pad feature to test a large area more quickly without damage. Switch to pins for accurate tests at various depths
• CHECK LUMBER AND HARDWOOD BEFORE BUILDING AND WOODWORKING – Know the moisture content of your wood to make sure you’re not using damp, moist wood on your projects to avoid cracks, splits, warping. Ensure wood flooring has acclimated before installing
• PERFECT FOR HOME INSPECTIONS – Use pad for quick non-invasive pinless scanning during an inspection to find moisture behind a wall or under a floor. Once you locate high moisture areas, use pin feature to identify problem spots and potential leaks
• EASY TO USE – Large easy-to-read backlit display. Sturdy, hand-friendly tester body feels solid when pressing replaceable pins into materials. Hold key freezes reading. Test lumber or building materials – brick, concrete, drywall, plaster and carpet
• LOADED WITH FEATURES YOU WANT – Moisture level indicated by numeric display, icons and optional audio alerts showing the moisture content as high, medium or low. Accuracy ±3%. Includes battery-saving auto shut-off, protective cap, 9V battery

User questions & answers

Question:	How do I get replacement pins? How do I can’t act manufacturer
Answer:	Must have been a return and seller did not check it. Mine came with both. You can probably download instructions off web. Batteries not so much
Question:	Can read moisture in rv walls
Answer:	No case comes with it. I sliced the edge of the plastic packaging, and reuse it to store the tool.
Question:	What depth does it scan to
Answer:	It senses moisture through a painted surface.
Question:	Does this work to read moisture content inside or on the surface of rubber
Answer:	They offer different varieties. Some are pinless and some have pins.

Product features

Check moisture

Use replaceable pins to check moisture content in specific areas at various depths. Or, take advantage of the built-in dual option of the pad to check moisture content ¾” deep in most material over a broader area more quickly.

Easy to read

The full-time backlit LCD display makes the large, easy-to-read digits visible even in low-light work environments. Plus, clear moisture content icons indicate general levels at a glance.

Ready to use

The moisture meter comes with a protective cap, one set of stainless steel test pins, 9V battery and a user’s guide so you can start using the moisture meter right out of the box.

Product description

The Orion 910 Deep Depth Pinless Wood Moisture Meter Kit continues the Wagner tradition of superior accuracy and adds incredible new functionality. The new Orion 910 meter incorporates IntelliSense technology, a more rugged design, and industry exclusive true in-the-field calibration capability provided by the included On-Demand Calibrator.

• Orion 910 deep depth pinless moisture meters featuring accuracy, versatility, and quality
• Built with a non-damaging pinless sensor, IntelliSense technology, and backed with a 7-year warranty
• Virtually unaffected by temperature of the wood or the environment
• Every Orion meter comes with an on-demand calibrator to easily calibrate your meter
• Easily set the wood species you need to measure. Includes a Relative (comparative) measurement mode for non-solid wood measurement applications on treated wood, drywall and other materials

User questions & answers

Question:	measure moisture at two depths, what are those depths
Answer:	I purchased two of these. They were an extremely tight fit on my FNH .40 and wouldn't fit my PMR30. A couple of minutes with a triangle needle file and they now fit all my firearms, hand gun and long gun. It should fit but if it gives you a little trouble fitting, a couple minutes work make these an excellent value. They work as well as or better than all my other green lasers, and for brightly lit situations they are far better than any red one. Yes, they even fit all my .45's, which are all 1911's.
Question:	Can you recommend a meter that can accurately read from 5/8" to 6" treated pine material. We are in the process of staining large amounts of lumber
Answer:	If it has a rail system with atleast three rails then it should
Question:	What is the best meter for log home restoration
Answer:	Already answered correctly. Push one side turns it on; push other side turns it off. It remains on until turned off.
Question:	Does this product have a warranty? I just noticed i couldn't find anywhere where it mentions it
Answer:	If the battery is installed correctly and the batteries are not dead the laser should light up when turned on.

Product features

True In-The-Field Calibration

There is no need to return your Orion to the factory for calibration. Every Orion meter comes with an individually paired On-Demand Calibrator allowing you to easily calibrate your meter anytime*, ensuring that you will always be able to obtain accurate moisture measurements. A NIST-traceable version, with a certificate of calibration, can also be purchased.

*patent pending

Fast Selection Species Settings

With simple up/down arrow buttons, your Orion meter can be easily and quickly set for the wood species you need to measure. Plus, the range of settings accommodates practically any softwood or hardwood species in the world. The Orion 910 can also be user-configured to measure some non-solid wood products such as plywood, OSB, or MDF. The Orion line even has settings information for many bamboo flooring products.

Virtually Unaffected by Temperature

Every Orion pinless meter is virtually unaffected by the temperature of the wood or the environment. Unlike pin meters, Orion’s sensing technology does not need correction or adjustment to account for the temperature of the wood.

Non-Damaging Pinless Sensor

Every Orion meter features electromagnetic wave technology…a non-damaging way to quickly and accurately measure the moisture content of wood or other materials. Compared against pin meters, the pinless sensor technology of the Orion line of meters does not damage the wood and also eliminates the frustrations and costs of broken pins, common with pin-type meters.

• ▶ 【Non-invasive and Non-marring】Get an accurate reading without making holes in furniture or other valuable objects. By using HF electromagnetic waves, you can spare the hassle of making holes and having to deal with the cleanup.
• ▶ 【High Precision, Wide Compatibility】Get exactly the reading you need, every time. Do you have different kinds of wood you're measuring? Choose from 10 unique grades of timber density, with 4%~80% Maximum Error (1% + 0.5).
• ▶ 【Temperature Compensation】MD918 meter has a temperature compensation function that keeps the object to be tested at the same temperature at least within 5 minutes to ensure more accurate readings.
• ▶ 【Power Saving】If you're not using the reader, its intelligent auto-off function will shut off the unit after 5 minutes of no use. Ultra large LCD screen ensures clear readings even if it's in a dark space.
• ▶ 【Calibration Indication】Make sure you're always in the know. The wood moisture meter will alert you for zero calibration, temperature calibration, and ATC overrunning (it alerts when the reading exceeds the upper limit of moisture content ratio).

User questions & answers

Question:	What density selection would work best for sheetrock
Answer:	Hello John Jo,A thermal camera and moisture meter would perform the same tasks. The convenience and innovation on the MR160 is that the unit will do the job of both separate units. The IR function in the MR160 is for visual guidance, where a thermal camera may provide more detailed temperature information. Best Regards...
Question:	What is the maximum sensing depth of the MDP
Answer:	Not at all, the thermal imager is so so. But the true benefit is the ability to read the moisture content of material and to have all your customized readings on the screen at all times, including relative humidity, ambient air, etc. I have the 176 which does probe testing and also has a pad on the back of the unit, this pad lets you pull a reading without destructive measures (awesome for general walk arounds)! Can't remember what the other models offered, but I am happy with the 176. Great for mold and home inspections. I do also have an additional flir thermal imager. I definitely recommend one with MSX technology. The difference is unreal! Good Luck.
Question:	Do i need to calibrate this wood moisture meter before using
Answer:	I would get the MR176 because the Thermal Imager may pick up the steam and the change in temperature, not just look for moisture.
Question:	Just bought. Husband calibrated. But now it blinks 0.0% when turned on and will not take a measurement. How to fix
Answer:	Hi, Matt M. Totally agree with you - if you need only just to spot the problem area (leakage in a wall or elsewhere) intending to fix it and get rid of it - the very Flir's C2 or TG165 would be pretty handy and cover all the needs of this piece/type of job. The MR160 is a multi-tool for those who need to "Locate the Enemy and MEASURE the Hostility" for some specific needs or considerations. )

Product features

Performance Characteristics

* Measurement through HF electromagnetic sensing

* 10 different timber density at option

* Automatic temperature compensation

* Setting of upper limit of moisture content ratio, prompting of overrunning

* Ultra-large LCD ensuring clear readings

* Automatic prompting of low voltage

Product description

Pinless Moisture Meter for non-invasive measurement in wood and other building materials with virtually no surface damage. Measurement depth from 078-Inch (20mm) to 1.6-Inch (40mm) below the surface. Two user-settable alarm levels with audible beeper and visual (flashing "RISK" or "WET" indicators. Triple backlit LCD. Complete with 3 AA batteries and pouch case.

• Non invasive moisture content measurements in wood/building materials
• Relative pinless moisture reading for non-invasive measurement from 0.0 to 100.0 with 0.1 resolution
• Multifunction backlit triple LCD display
• Pin less measurement depth from 0.78 Inch (20 millimeter) to 1.6 Inch (40 millimeter) below the surface
• High frequency sensing technology

User questions & answers

Question:	Can it be used for measuring moisture in soil
Answer:	The little booklet says to use setting # 3 when you are not sure about a wood type, I would start there and then try setting one up and one down and see what the readings are and how they compare to each other. Then get it wet and try the test again.
Question:	Hola, como funciona el aparato?? he leído que lo que marca en el display es la humedad relativa, pero no entiendo. Gracias
Answer:	The company doesn't specify the sensing depth. You might have to call them.
Question:	Will this measure moisture through marble and backer board? I think I may have a leak behind it. Thank you
Answer:	No, not out of the box, The time might come where you will have to like when it won’t go back to zero, that happened to me one time , however, just keep your instructions They will show you how to calibrate Your meter back to zero hope this helps
Question:	Does it come with a case
Answer:	Put it back in the package and return for replacement

Product features

Non-Invasive Measurements

The MO257 pinless moisture meter by Extech allows the user to assess the moisture content of various materials without penetrating the surface. Using pinless, high frequency sensing technology, the MO257 is capable of taking measurements at depths up to 1.6” (40mm) below the surface.

Effective in Low-Light Environments

Thanks to the backlit multifunction LCD display, the moisture readings can be taken and recorded in low-light environments.

Customizable Alarms

The MO257 moisture analyzer features two adjustable alarm levels with audible beeper and flashing visual indicators.

Automatic Calibration

Easy to use, the MO257 Extech moisture meter is also designed to automatically calibrate (in dry air) when powered on.

Construction

With a non-invasive moisture meter like MO257 by Extech, builders and contractors can make sure wood, particle board and other building materials are sufficiently dry prior to use without causing surface damage.

In the Home

Wood moisture meters like the MO257 can help homeowners address mold issues by measuring the relative moisture of carpeting and ceiling tiles, and locating potential sub-surface wet spots in drywall.

Product description

The MO55 is a combination pin/pinless moisture meter. Take quick moisture measurements on wood and building materials with choice of pin or pinless (non-invasive) Method. Easy-to-operate with display icons that indicate the levels of moisture content Plus audible alert feature. Ideal for building restoration projects and applications where moisture detection on floors, tiles and under carpets is critical. A Must-Have tool for analyzing the after-effects of water leakage behind walls and in ceilings. Complete with pins , protective cap, and 9V battery.

• Measure Moisture Level in wood, wall board, sheet rock, cardboard, concrete, plaster, and mortar
• Moisture Icons provide a visual reference for low, medium, and high levels of moisture
• Audible Alert Tone beeps faster as moisture level increases
• Pinless Measurement Mode reads moisture up to 1 inches below the surface
• Data Hold Function freezes readings on display

User questions & answers

Question:	Can i use it for paper
Answer:	Hello, As per manufacturer the item " Measures relative moisture of various building materials including wood, particle board, carpeting, and ceiling tiles using non-invasive Pinless Technology" Regards, Kate Mal
Question:	would this work with exterior stucco
Answer:	Muchas gracias por su interes en nuestros productos. Nos complace atenderlo, si gusta puede comunicarse con nuestro equipo de Soporte Tecnico. Con gusto, nuestros representantes le explicarán la naturaleza de las medidas del MO257.
Question:	Does this work with painted concrete masonry
Answer:	It should but be aware that if there is anything metallic or conductive behind the marble/backer board and within the measuring depth, it will display 99.9% humidity. Use a dry piece of wood to limit the depth of what you want to measure and run several tests with different configurations to understand how this tool works.
Question:	Could this device provide accurate moisture readings of residential wall cavities following, for example, a flood
Answer:	Yes it does. Please see the link to the data sheet below "Complete with 3 AA batteries and pouch case" https://www.onlinecomponents.com/datasheet/mo257.aspx?p=42964990

Product features

Moisture Readings on Multiple Materials

Whether you’re building with drywall, sheet rock, plaster, concrete, or mortar, Extech’s MO500 moisture analyzer provides quick and accurate moisture content readings.

Choose Your Measurement Method

Pin or pinless, the choice is yours. The MO500’s pinless moisture measurement function can take non-invasive measurements up to a depth of 25 mm on a wide range of materials.

Easy to Read Measurements

The MO500 non-invasive moisture meter’s easy to read measurement icons display low, medium, and high levels of moisture content for quick reference.

Audible Alert

Extech’s lightweight moisture meter features an audible alert that beeps faster as higher levels of moisture are detected allowing the user to quickly assess the condition of the building material.

A Must Have Tool For Any Construction Project

Make Sure Building Materials Are Dry:

Using the Extech MO500 combination moisture meter when installing flooring or carpeting allows you to make sure your materials are completely dry prior to installation.

A Must Have Tool For Any Construction Project

Assess Risk of Mold During Restoration Projects:

Whether you’re building an addition on your home or replacing insulation, the ability to measure moisture content in building materials using the MO500 allows you to quickly locate conditions that could cause mold.

• Large LCD Display Clear Readings -- 100% brand new and high quality. Large LCD display can provide clear reading for you, ultra large LCD ensures clear readings
• Pinless Wood Moisture Meter -- There are no pins on this tool, so your wall and projects can be saved from scuffing and scratching while you figure out their moisture levels
• Electromagnetic Wave Measuring -- Adopt high frequency electromagnetic wave measuring, it can fast measure the moisture content of many kinds of wood materials
• 10 Modes of Wood Density Mode -- There are 10 modes of wood density mode for your choice. This reads up to 70% for wood, Measurement Range: 2%~70%
• Suitable Measuring Most Woods -- Suitable for measuring the containing water of most wood, bamboo, paper, herbals, book, wooden block, carton, etc