11 best fence stain sealers

Product description

Ready Seal stain enhances the natural beauty of the wood allowing the texture and grain of the wood to remain visible. This stain is an oil-based, semi transparent stain and sealer in one, suitable for all your exterior wood projects. It is a unique formula that penetrates deeply to protect and preserve wood from the elements such as mold, mildew and damaging UV rays.

From the Manufacturer

Ready Seal stain enhances the natural beauty of the wood allowing the texture and grain of the wood to remain visible. This stain is an oil-based, semi transparent stain and sealer in one, suitable for all your exterior wood projects. It is a unique formula that penetrates deeply to protect and preserve wood from the elements such as mold, mildew and damaging UV rays.

• Requires no primer. Ready Seal is darkest when first applied. It reaches its true color in approximately 14 days. Do not apply Ready Seal over painted or newly stained surfaces. Sealed surfaces inhibit penetration.
• May be applied using sprayer, roller or brush onto the woods surface.
• Requires no back brushing and will nerver leave runs, laps, or streaks.
• Requires no wet-line application, the product will blend itself and can be applied in any temperature range for proper application.
• Requires no diluting or thinning prior to spray applications.
• Subject to or will include a PaintCare recycling fee in the following states: CT, or VT. Not available in CA.
• Easy maintenance - no sanding or stripping required for re-application

User questions & answers

Question:	What is the warranty on this
Answer:	I don't believe there is any warranty. We applied it two years ago and the covered areas still look good. The section in direct Sun...needs to have it applied again.
Question:	How long can the product be stored once the container is opened
Answer:	We actually used some that we had stored in our garage that was left over from the last time we stained our siding and that was in the summer of 2012, 6 yrs ago. When we removed the lid, it looked like it had become a gel but my husband used a drill with a paint mixer/stirrer tool and it became liquefied again. We applied it to the siding without incident and the color matched the new 5 gallon containers we bought this summer .
Question:	I have 275 ft of fence plus a gate- what's the coverage with using a sprayer
Answer:	I’m in the process of staining my fence (I am using a different brand) with a semi-transparent stain. I have 187’ of fence at 5’ high including 2 gates. Applied with a roller and brush, I’m going to need around 13 gallons. My recommendation is rent a sprayer from Home Depot. You’ll save time and money as you’ll use less product and it will go much much faster.
Question:	we have a heavy dining set and i am worried about scratches after i stain, how does it hold up to heavy chairs moving back and forth
Answer:	I have a deck/patio furniture set, including a cast iron umbrella base. Lots of use over the last year with no evidence of scratches in the deck. The stain penetrates the wood rather than building a barrier so dragging stuff across the boards won't take it off provided the wood is properly prepared.

Product features

Application

1. Use a brush, roller or sprayer to apply Ready Seal.

2. Blend multiple containers together to ensure color consistency.

3. Apply two light coats to wood surface and allow at least 45 minutes between.

4. Allow 48 to 72 hours of drying. Drying time will vary depending on temperature, humidity and surface porosity.

-Ready Seal contains no linseed oil and will not stain hands.

-Ready Seal is biodegradable when in contact with soil and water.

-Meets current VOC level requirements throughout the United States.

Product description

#1 Deck Premium Fence Stain is an advanced, water-based, exterior semi-transparent stain formulation designed to penetrate deep into wood pores for maximum protection and longevity. It protects wooden fences from harmful UV rays and damage caused by water penetration. #1 Deck Premium Fence Stain is safe to use, has a low odor, and is easy to clean up with soap and water. It is is ideal for all wood types other than composite lumber. It can be used on pressure treated fences, cedar fences, redwood fences, and more. This outdoor sealant can be applied with a brush and roller, or spray it on with a pump-up, or airless sprayer. Available in 1 gallon and 2.5 gallon sizes.

• Long Lasting Fence Sealer - 3 Year Warranty on Fences
• Easy to Apply Water-Based Fence Stain - Use an Airless or Pump Sprayer, or Brush & Roller
• Available in 5 Semi-Transparent Colors Including Driftwood Gray, Natural, Cedar, Dark Walnut, & Light Walnut
• Waterproof Protection for All Wood Surfaces Including Fences, Decks, Siding, Log Home Boards
• Resists Fading, Graying, & Peeling on All Vertical Wood Surfaces

User questions & answers

Question:	How many square feet of coverage in a gallon
Answer:	Battery powered, no plug

• PROTECTS AGAINST COLOR FADE AND PREVENTS GRAYING - #1 Deck Protects Wood From Damage Caused By Exposure to the Elements. Can Be Used On Pressure Treated Pine, Cedar, Fir, Redwood, or Most Other Softwoods. Hardwoods Will Require More Frequent Maintenance Coats.
• BOTH A DECK STAIN & DECK SEALANT IN ONE - #1 Deck Stain Is a Dual-Purpose Stain & Sealer. It Adds Color to Your Wood and Seals it, Preventing Damage Caused by Water Penetration.
• ALLOWS THE WOOD GRAIN TO SHOW THROUGH - Available in 5 Beautiful, Semi-Transparent Deck Stain Colors That Dry to Flat, Natural Looking Finishes That Will Enhance the Beauty of Your Exterior Wood.
• BETTER FOR THE PLANET, EASY SOAP & WATER CLEANUP - With Less Than 50 g/L VOC Content, #1 Deck Sealer Is a Better Choice For Our Planet. Clean Up is Super Easy - Just Use Soap and Water.
• WORKS ON DAMP WOOD, MINIMIZING THE WAIT TIME BETWEEN CLEANING AND STAINING - Once Your Wood Deck Is Visibly Dry, It's Ready to Stain.

User questions & answers

Question:	In the reviews, everyone mentions the light oak color but I don’t see it available. Is it discontinued or renamed
Answer:	I bought 2 gallons of light oak about a month ago. Look again or call the company.
Question:	Can I reapply this over the old coat when I need to
Answer:	I'd clean the boards the best you can and let them dry, and then yes, you can reapply it. It says so on the can.
Question:	How many sq ft will 2.5 gallons cover
Answer:	depends. cover says 100 - 150 sq ft per gallon. I used 7.5 gallons on about 600sq ft of deck and barely had enough, that was 2 coats. 1st coat sucked up a lot, 2nd coat went a lot farther
Question:	How many years on before having to reapply
Answer:	I live at 9000 ft. in the mountains- .wind, rain, snow, UV. I try to touch up every 2-3 years.
Question:	Difference between marine formula? Why wouldn’t I want marine formula on my land fence
Answer:	Look at our Nano and Multi -Surface Concentrate. Clear will allow the wood to grey naturally.
Question:	Can this product be sprayed
Answer:	Apply first coat with a synthetic brush; pump-up garden sprayer; air-assisted; and/or airless sprayer. Use 15-17 tip and medium to coarse spray pattern. When spraying, always back brush for best results. Second coat can be applied once first coat has penetrated but is still damp. Second coat must be applied within one hour of applying first coat.
Question:	How well does this work on pressure treated decking...near the beach
Answer:	Never received it. Said there was a problem with delivery. 😱 ????????????????
Question:	can I apply epoxi pain over
Answer:	No

Product features

About SaverSystems

At SaverSystems, we understand the frustration people feel when they see what they've built deteriorate from the elements. Property is one investment you can bank on, but if it's made with concrete, masonry, or wood it needs to be protected. SaverSystems employs state of the art technology to help protect and save what you build.

SaverSystems has manufactured premium quality, water repellents and protective coatings for over 30 years. We make coatings for a variety of surfaces including wood, concrete, masonry. In addition to the #1 Deck brand, SaverSystems also manufactures DEFY, ChimneyRx, MasonrySaver, & ChimneySaver branded products.

All of our products are manufactured in our production facilities located in Richmond, Indiana. Every product is produced under strict quality standards and formulated with the highest quality raw materials available. Our innovative solutions and coatings have stood the test of time, and are trusted by industry professionals and homeowners alike.

Product description

Thompson's WaterSeal Waterproofing Stain provides complete outdoor wood protection. It waterproofs long after the initial water beading is gone. Use on decks and fences, outdoor furniture and exterior wood. Shows medium wood grain and medium color. 1-coat protects 4 years on decks or 6 years on fences and siding. Applies to freshly cleaned damp or dry wood. Prevents water damage. Advanced polymers provide fade resistant color. Coating resists mildew and UV damage.

• Prevents Water Damage
• Advanced Polymers Provide Fade Resistant Color
• Coating Resists Mildew and UV Damage
• Applies to Freshly Cleaned Damp or Dry Wood
• Exceeds Industry Standard ASTM D-4446 for Waterproofing Wood

User questions & answers

Question:	The listing says semi-transparent, but the picture says transparent, which version is this
Answer:	Semi
Question:	Is this a gallon container of the product
Answer:	Yes this is a one gallon of Thompson water seal
Question:	what clear seal do you recommend to use on 12year old pressure treated planks
Answer:	I've used Thompson's water-based semi-transparent stain/sealer 3 times now for my 15 year-old pressure-treated deck and it has always done a great job of covering and protecting the wood. It doesn't really last the 4 years they claim, but still very good. They also make an oil-based clear sealer and I use that on my cedar pergola, also very good stuff but it's hard to work with because it doesn't cleanup with water. As an alternative to the oil-base they have an all-purpose water-based clear sealer for wood and masonry. I would use that on my pergola if it was made of pressure treated wood, but with cedar I really want a penetrating oil. So for your pressure treated deck, I would recommend the water-based clear sealer. Given how well the semi-transparent stain has worked for me, I would expect good results with the clear as well. You will certainly want to clean the wood first if you expect to brighten the gray appearance of aged wood. I spray oxygen bleach on the wood first and then scrub with a stiff brush and rinse before sealing.
Question:	Would this product work well on untreated Adirondack furniture
Answer:	Yes, I think it would be suitable. I have only used it on my deck however. Good protection in a wet climate. Rub it down well after it dries to keep the color from getting on clothes though if you're using a color stain.

Product features

The Thompson's Company has earned a well-deserved reputation as identifying industry trends and emerging technologies.

In the early 1920’s, polymer chemist Edward Addis Thompson developed a formula that protected buildings from exterior water damage. His discovery became known as Thompson's WaterSeal Clear Multi-Surface Waterproofer and initially was used by architectural and construction firms for concrete applications.

Product description

SEAL-ONCE has been leading the innovation in the use of nanotechnology to create long-lasting, non-toxic wood sealers & tinted wood stains since 2005. Our New & Improved NANO+POLY Penetrating Wood Sealer provides superior protection against water damage, mold, decay and eliminates warping & cupping. Unlike most top-coat sealers, NANO+POLY deeply penetrates the surface of wood, using proprietary nanotechnology to form a flexible breathable barrier, that coats the wood fibers at the cellular level. This water-based wood protector combines proprietary nanotechnology with the strength of polyurethane to provide 360° of protection. It is warranted to protect against water accumulation for up to 10 years on vertical surfaces & 6 years on horizontal. With the added POLY in this formula, it also creates a durable surface-coating, that protects against wear & tear in high traffic areas, making it a great choice for wood decks and walkways. NANO+POLY is a water-based, eco-safe sealer that goes on milky white & dries clear and is ideal for use on unfinished interior and exterior wood.. It creates a UV-stable coating that preserves the natural color of the wood and helps resist weathering and decay. It allows wood to age naturally without decay, is non-film forming and will not alter the natural beauty of the wood. NANO+POLY is Ultra-low VOC, making it VOC compliant in all 50 states, including California. NANO+POLY can be tinted and used as wood stain or finish in 11 semi-transparent color tints that also provide added UV protection. Available in pre mixed colors.. Recommended Applications Decks Railings Wood siding Log homes Thermally modified wood Docks Piers Fences Exposed beams Outdoor furniture Planters Play structures Cedar shingles. The Days of Needing an Oil-based Wood Sealer & Stain full of Toxic Chemicals are Over Features: Eco-safe Non-toxic

• Eco Safe
• Non-Toxic
• Pre Mixed

• Wood deck protector - A true oil-based semi transparent stain and sealer meant to protect and highlight the natural beauty of the wood grain.
• Storm Wood Stain Protector is a semi transparent sealer that penetrates deep into the wood for added protection against Mother Nature.
• Compatible with any wood species. Great for wood staining Mahogany, as a Mahogany sealer, Cedar sealer, Cedar fence sealer, Redwood, Pine wood stain, Douglas Fir, Spruce Stain, Cyress, and Pressure Treated.
• Great for Decks, Fences, Siding, and other Wood Substrates. Can be used as a wood fence protector or any other wood substrate protector.
• Applies easily with brush, roller, or spray application. Lap-Free Application & UV Protection

User questions & answers

Question:	Should I wipe down the wet spots after a few days of drying
Answer:	Hello, Yes lightly wipe those spots and and make sure those areas are dry before putting into use. note: wet spots could have been caused by a lack of penetration into the wood (a previous stain or sealant could be the culprit), applying to heavy, or the presence of moisture in the wood.
Question:	How do you open the plastic seal lid
Answer:	Hello, Thanks for your question on this. The plastic lid can be slightly difficult to take off, but is applied to ensure safe transport. To remove, I have found that a paint can opener or flat head screw driver wedged either in the top or on the side on the can works pretty easily. Be sure not to use a hammer to try and wedge the flat head screw driver in, as you want to avoid damaging the metal can.
Question:	What is the coverage for a 1 gal can
Answer:	12x 12ft
Question:	How long does it last? how long until it needs to be reapplied
Answer:	We don’t know. We applied it firstly on the new fence.

Product features

STORM PROTECTOR EXTERIOR STAINS KEEPING THE EXTERIOR BEAUTIFUL

Storm Protector stains are designed to stand up to whatever comes down. Whether it's months of baking sunlight and damaging ultraviolet rays, seemingly endless rain or brutal winters marked by ongoing cycles of freezing and thawing. Our Storm Protector Stains are there to ride out the storm.

Storm System

Storm Protector is a Semi-Transparent penetrating stain and sealer meant to protect and highlight the natural beauty of the wood grain.

Penetrates Deep into the Wood Grain

Storm Protector penetrates deep into the wood for added protection against Mother Nature.

Compatible with Most Wood

Storm Protector is compatible with any wood species including: Redwood, Cedar, Pine Douglas Fir, Spruce, Cypress, Mahogany, and Pressure Treated.

EASY APPLICATION

LONG LASTING BEAUTY

PERFECT SOLUTION FOR DECKS AND RAILINGS

Product description

SEAL-ONCE NANO Penetrating Wood Sealer & Stain protects and stabilizes wood beneath the surface against water damage & decay. It is a great investment for your outdoor wood products and a safe way to enhance wood and extend its useful life by years. The water-based formula uses proprietary nanotechnology to form a flexible breathable barrier by coating the wood fibers at the cellular level. Protects up to 10 years on vertical surfaces & 6 years on horizontal with no toxic chemicals. This makes it easy to apply and safe for people, pets & plants. NANO allows wood to age naturally without decay, and can be used to preserve old or new wood, extending its natural life. It is non-film forming and will not alter the natural beauty of the wood. NANO is a wood waterproofer that preserves the integrity of the wood by inhibiting rot, mold and mildew growth & eliminates warping and cupping. NANO goes on milky white and dries clear. It is also available in 11 semi-transparent wood stain color tints, that provide added protection against harmful UV rays: Battleship Gray, Black, Bronze Cedar, Brown, Cape Cod Gray, Cedar, Light Brown, Mahogany, Natural, Redwood & Shale Gray Recommended Applications: Designed to be used on unfinished interior and exterior wood surfaces including: Cedar shingles • Wood siding • Exposed beams • Fences • Planters • Outdoor furniture • Play structures • Plywood • Pressure treated wood • Architectural millwork • Woodworking Typical sealers form a barrier on the surface, trapping moisture below the surface. As water evaporates, it causes the surface coating to crack & peel, leaving a surface that requires continued maintenance. SEAL-ONCE protects against water damage, using proprietary nanotechnology that penetrates deep into the wood and bonds to the wood fibers and cells at a microscopic level. SEAL-ONCE protects from the inside out to provide unparalleled protection & stability for wood.

• Water-based sealer with advanced penetrating nanotechnology. This premium wood sealer performs like an Oil-based product, without any noxious solvents or toxic chemicals.
• Great investment to enhance and extend the natural life of wood. Protects against water damage for up to 10 years on vertical surfaces & 6 years on horizontal.
• Ultra Low-VOC wood sealer safe for people, pets, plants or marine life. Easy to apply with soap & water clean-up. Save time with wet on damp application.
• Prevents warping, cupping, wood rot, mold, mildew, staining, decay & will not peel.
• When used as a wood stain creates a UV barrier to prevent fading. Rich color palette available in 11 different color tints. Clear formula allows wood to turn gray naturally.

User questions & answers

Question:	is this a clear tint. I want to keep the natural look of my wood
Answer:	It will bounce a little bit, but you still have to open it by hand
Question:	whats the voc rating on this
Answer:	The electronic lock allows for a 3–8 combination codes. The setting procedure is explained in great detail in the attached manual
Question:	If you apply one coat to both sides of 3/4 plywood do I need a second coat
Answer:	keep your backup safe well
Question:	Can you use a sprsyer to apply, or does it have to be applied with a brush or roller
Answer:	It will open with the key. The fingerprint sensor will not work if the battery is dead.

Product features

The Science of SEAL-ONCE and Innovative Use of Nanotechnology in Wood Finishes & Stains

Unlike many top-coat sealers sold today that trap moisture below the surface, NANO creates a flexible, breathable barrier which allows water vapor to escape. This key feature helps prevent damage to wood caused by water intrusion, such as: wood rot, decay, mold & mildew growth, cracking & splitting. Typical wood sealers form a barrier on the surface of the wood, trapping moisture below the surface. As the water evaporates, it causes the surface coating and the substrate to crack & peel, leaving a broken surface that requires continued maintenance and is susceptible to additional damage. SEAL-ONCE uses cutting-edge, nano-particle technology to allow wood to breath and help prevent water vapor damage by protecting wood from the inside out.

Water-based Product that Will Not Harm People, Pets, Plants, Livestock or Marine Life.

SEAL-ONCE products are ultra-low VOC, low odor, non-toxic, non-flammable and non-ozone depleting. They are safer for the environment and do not contain nitrates, phosphorous compounds or heavy metals like many Oil-based sealers & stains on the market today.

Quick & Easy Application

Apply first coat with a synthetic brush; pump-up garden sprayer; air-assisted; and/or airless sprayer. Use 15-17 tip and medium to coarse spray pattern. When spraying, always back brush for best results. Second coat can be applied once first coat has penetrated but is still damp. Second coat must be applied within one hour of applying first coat. For best results, apply in the shade and out of direct sunlight.

Available in 11 Tinted Wood Stain Colors

NANO can be tinted for use as wood stain in any of the 11 color tints available: Clear, Light Brown, Natural, Brown, Mahogany, Redwood, Bronze Cedar, Cedar, Black, Battleship Gray, Shale Gray & Cape Cod Gray. The tints are sold separately and when mixed with Clear, the tinted formula provides additional UV protection from harmful sun rays.

Surface Preparation & Coverage

Approximate coverage: 250-350 sq. ft./gallon per coat. Actual coverage will vary due to the porosity of the surface. All surfaces should be cleaned with SEAL-ONCE All Wood Cleaner before sealing for best penetration and performance. Remove all old coatings, dust, debris and loose material. Remove oil, grease, algae, grime, mill glaze and mold and mildew stains with appropriate cleaners.

Product description

SEAL-ONCE has been leading the innovation in the use of nanotechnology to create long-lasting, non-toxic wood sealers & tinted wood stains since 2005. Our New & Improved NANO+POLY Penetrating Wood Sealer provides superior protection against water damage, mold, decay and eliminates warping & cupping. Unlike most top-coat sealers, NANO+POLY deeply penetrates the surface of wood, using proprietary nanotechnology to form a flexible breathable barrier, that coats the wood fibers at the cellular level. This water-based wood protector combines proprietary nanotechnology with the strength of polyurethane to provide 360° of protection. It is warranted to protect against water accumulation for up to 10 years on vertical surfaces & 6 years on horizontal. With the added POLY in this formula, it also creates a durable surface-coating, that protects against wear & tear in high traffic areas, making it a great choice for wood decks and walkways. NANO+POLY is a water-based, eco-safe sealer that goes on milky white & dries clear and is ideal for use on unfinished interior and exterior wood.. It creates a UV-stable coating that preserves the natural color of the wood and helps resist weathering and decay. It allows wood to age naturally without decay, is non-film forming and will not alter the natural beauty of the wood. NANO+POLY is Ultra-low VOC, making it VOC compliant in all 50 states, including California. NANO+POLY can be tinted and used as wood stain or finish in 11 semi-transparent color tints that also provide added UV protection. Battleship Gray, Black, Bronze Cedar, Brown, Cape Cod Gray, Cedar, Light Brown, Mahogany, Natural, Redwood & Shale Gray. Recommended Applications Decks Railings Wood siding Log homes Thermally modified wood Docks Piers Fences Exposed beams Outdoor furniture Planters Play structures Cedar shingles. The Days of Needing an Oil-based Wood Sealer & Stain full of Toxic Chemicals are Over

• Non Toxic
• Eco-safe

User questions & answers

Question:	What is the coverage of a gallon of this product
Answer:	Goes quite far I have a large deck and I ended up using a gallon and a half

• Opaque Finish Completely Hides Wood Grain & Provides Maximum Protection Against Fading & Graying Caused by Damaging UV Rays
• Acts as Both a Stain and Sealer for Your Wood - Use Over Top of Existing, Solid Color Wood Stains (that still have good adhesion)
• Available in 6 Beautiful, Solid Color Finishes That Dry to a Flat, Natural Looking Finish
• Low Odor Stain, Water-Based Cleanup - Low VOCs (<60 g/L)
• For Use on all Horizontal and Vertical Wood Surfaces Including Pressure Treated Lumber, Pine, Cedar, Fir, Redwood, Mahogany, & More

User questions & answers

Question:	How much does 1 gallon cover
Answer:	About 1/4 of an 8x12 shed. I used 4 gallons for the whole shed
Question:	Will this work with a paint gun
Answer:	Yes, this product works well with an airless sprayer
Question:	Is there any texture to this solid stain? Does it last without peeling for a couple years
Answer:	There is no texture, just a smooth paint that took the texture of what we painted it on. No idea on the peel, only just used in the last couple weeks.
Question:	How much do I need for a 24’ x 18’ deck
Answer:	This is a water based product and as such gets a better coverage area. The product should yield approximately 600 SF. However, when staining a deck, you'll not meet that coverage area if you use an airless paint sprayer. Typically the average would be 450 - 475 SF. If you roll it, you should expect to get between 500 - 525 SF.

Product features

About SaverSystems

At SaverSystems, we understand the frustration people feel when they see what they've built deteriorate from the elements. Property is one investment you can bank on, but if it's made with concrete, masonry, or wood it needs to be protected. SaverSystems employs state of the art technology to help protect and save what you build.

SaverSystems has manufactured premium quality, water repellents and protective coatings for over 30 years. We make coatings for a variety of surfaces including wood, concrete, masonry. In addition to the #1 Deck brand, SaverSystems also manufactures DEFY, ChimneyRx, MasonrySaver, & ChimneySaver branded products.

All of our products are manufactured in our production facilities located in Richmond, Indiana. Every product is produced under strict quality standards and formulated with the highest quality raw materials available. Our innovative solutions and coatings have stood the test of time, and are trusted by industry professionals and homeowners alike.

• Water-based sealer with advanced penetrating nanotechnology & added strength of Polyurethane. This premium wood sealer performs like an Oil-based product, without any noxious solvents or toxic chemicals.
• Great investment to enhance and extend the natural life of wood. Protects against water damage for up to 10 years on vertical surfaces & 6 years on horizontal.
• Ultra Low-VOC wood sealer safe for people, pets, plants or marine life. Easy to apply with soap & water clean-up. Save time with wet on damp application.
• Prevents warping, cupping, wood rot, mold, mildew, staining, decay & will not peel like many topical sealers that only form a top-coat.
• When used as a wood stain creates a UV barrier to prevent fading. Rich color palette available in 11 different color tints. Clear formula allows wood to turn gray naturally

User questions & answers

Question:	What color is this sealer? On the can it says clear but in the description it says white
Answer:	It goes on white dries to perfect wet look clear
Question:	Can this be used on raised beds? Both inside and outside of the bed
Answer:	You may use this product, however, the inside of the box will not be protected as it would be against soil.
Question:	Can I use this on the inside of a terrarium? I'm making one out of wood, and I need the inside to be water proof, as it will be very humid
Answer:	We would not recommend our products for this application. It will be too much constant contact with moistures in an enclosed area.
Question:	Why shouldn't the product be used in doors? What would you recommend on doors
Answer:	Seal-Once products are completely penetrating and are non film forming. The door will still look like raw wood after it is applied. You cannot apply stain, paint ,polyurethane, or varnish over Seal-Once products. Also, Seal-Once products must be applied to raw wood.

Product features

The Science of SEAL-ONCE and Innovative Use of Nanotechnology in Wood Finishes & Stains

Unlike many top-coat sealers sold today that trap moisture below the surface, NANO+POLY creates a flexible, breathable barrier which allows water vapor to escape. This key feature helps prevent damage to wood caused by water intrusion, such as: wood rot, decay, mold & mildew growth, cracking & splitting. Typical wood sealers form a barrier on the surface of the wood, trapping moisture below the surface. As the water evaporates, it causes the surface coating and the substrate to crack & peel, leaving a broken surface that requires continued maintenance and is susceptible to additional damage. SEAL-ONCE uses cutting-edge, nano-particle technology to allow wood to breath and help prevent water vapor damage by protecting wood from the inside out.

Water-based Product that Will Not Harm People, Pets, Plants, Livestock or Marine Life.

SEAL-ONCE products are ultra-low VOC, low odor, non-toxic, non-flammable and non-ozone depleting. They are safer for the environment and do not contain nitrates, phosphorous compounds or heavy metals like many Oil-based sealers & stains on the market today.

Quick & Easy Application

Apply first coat with a synthetic brush; pump-up garden sprayer; air-assisted; and/or airless sprayer. Use 15-17 tip and medium to coarse spray pattern. When spraying, always back brush for best results. Second coat can be applied once first coat has penetrated but is still damp. Second coat must be applied within one hour of applying first coat. For best results, apply in the shade and out of direct sunlight.

Available in 11 Tinted Wood Stain Colors

NANO+POLY can be tinted for use as wood stain in any of the 11 color tints available: Clear, Light Brown, Natural, Brown, Mahogany, Redwood, Bronze Cedar, Cedar, Black, Battleship Gray, Shale Gray & Cape Cod Gray. The tints are sold separately and when mixed with Clear, the tinted formula provides additional UV protection from harmful sun rays.

Surface Preparation & Coverage

Approximate coverage: 250-350 sq. ft./gallon per coat. Actual coverage will vary due to the porosity of the surface. All surfaces should be cleaned with SEAL-ONCE All Wood Cleaner before sealing for best penetration and performance. Remove all old coatings, dust, debris and loose material. Remove oil, grease, algae, grime, mill glaze and mold and mildew stains with appropriate cleaners.

Product description

A good exterior wood stain offers long-lasting protection, waterproofing and a mildew-resistant finish that maintains the integrity and beauty of wood in variable outdoor conditions Our 100% Acrylic formula protects wood from rain, snow and sun damage. This stain is warrantied up to 3 years on decks and up to 5 years on fences and siding (see label for details). Use on properly prepared new to moderately weathered and unsealed exterior wood surfaces (0-10 years exposure) including decks, shingles, wood patio furniture, railings, siding, shakes and fences. This semi-transparent stain provides a mildew-resistant finish and UV protection. Coverage of up to 250 square feet For the first coat and up to 500 square feet For the second coat. This is a 1-Gallon can of KILZ exterior waterproofing, semi-transparent wood stain in Redwood. For failing coatings or to remove loose wood fibers, use a product such as KILZ Wood Stain & Finish Stripper followed by a product such as KILZ Wood Cleaner & Brightener to neutralize the wood. For best results allow the area to dry at least 24 hours before coating. Lightly sand to remove remaining wood fibers/fuzz. Apply with a pad applicator, nylon/polyester brush, or high quality pump sprayer. KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

• A good exterior wood stain offers long-lasting protection, waterproofing and a mildew-resistant finish that maintains the integrity and beauty of wood in variable outdoor conditions
• Our 100% Acrylic formula protects wood from rain, snow and sun damage. This stain is warrantied up to 3 years on decks and up to 5 years on fences and siding (see label for details).
• Use on properly prepared new to moderately weathered and unsealed exterior wood surfaces (0-10 years exposure) including decks, shingles, wood patio furniture, railings, siding, shakes and fences.
• This semi-transparent stain provides a mildew-resistant finish and UV protection. Coverage of up to 250 square feet For the first coat and up to 500 square feet For the second coat.
• This is a 1-Gallon can of KILZ exterior waterproofing, semi-transparent wood stain in Redwood.
• For failing coatings or to remove loose wood fibers, use a product such as KILZ Wood Stain & Finish Stripper followed by a product such as KILZ Wood Cleaner & Brightener to neutralize the wood.
• For best results allow the area to dry at least 24 hours before coating. Lightly sand to remove remaining wood fibers/fuzz. Apply with a pad applicator, nylon/polyester brush, or high quality pump sprayer.
• KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

User questions & answers

Question:	What type of solvent would I need to clean an automated sprayer out after using this product (warm water/thinner/solvent/etc
Answer:	It has a 1080 camera on it. No reason to attach a go pro.
Question:	Do they sell 5gal buckets
Answer:	The video quality is good
Question:	Could this be used to stain plywood subflooring indoors
Answer:	7-8 minutes after full charged per battery.
Question:	Can I use this over pre dyed wood (alcohol stain
Answer:	Just bought this drone. Absolutely NOT 8 min fly time. After calibration, gps sync, and using the camera to take pics, let alone video.. best fly time was 3.5 minutes.. was same on both batteries. Maybe if you take off and just let it hover with no maneuvers it may be longer. Going to buy another set and see if these were just old batteries. Good luck

Product features

Durable, Beautiful & Long Lasting

KILZ Stain provides durable, waterproof protection and a mildew-resistant finish that maintains the integrity and beauty of wood in variable outdoor conditions.

One gallon covers up to 250 sq. ft. for the first coat and up to 500 sq. ft. for the second coat.

Ideal for Decks, Siding, Fencing & More

Use on properly prepared new to moderately weathered and unsealed exterior wood surfaces (0-10 years exposure) including decks, shingles, wood patio furniture, railings, siding and fences.

Brush or spray on. Can also be applied with a high-quality paint pad.

Protects from Rain, Snow & Sun Damage

Our Acrylic formula protects wood from weather and UV damage. This stain is warrantied up to 3 years on decks and up to 5 years on fences and siding.