13 best stanley stud finders

Stanley is a well-known brand that produces stud finders, which are essential tools for locating studs or wooden beams behind walls and ceilings. These stud finders are categorized under Measuring Layout Tools and are commonly used in the Tools Home Improvement sector. Here's what you need to know about Stanley stud finders:

  1. Types of Stanley Stud Finders:

    • Electronic Stud Finders: These are the most common type of stud finders produced by Stanley. They use electronic sensors to detect changes in wall density, indicating the presence of studs or other hidden objects.
  2. Features:

    • Multi-Mode Detection: Many Stanley stud finders offer multi-mode detection, allowing you to locate not only wooden studs but also metal studs and live electrical wiring behind the wall.
    • Deep Scanning: Some models have a deep scanning mode that can detect studs at a greater depth within the wall, which can be useful for thicker walls or ceilings.
    • LCD Display: Stanley stud finders often come with LCD displays that provide visual and audible indicators to help you pinpoint the stud's location precisely.
    • AC Detection: To enhance safety, some Stanley stud finders are equipped with AC detection capabilities, warning you of live electrical wires hidden behind the wall.
    • One-Button Operation: These tools are designed for user-friendliness, with one-button operation making them easy to use even for beginners.
    • Marking Features: Some models have built-in markers or indicators that allow you to mark the exact location of the stud on the wall for easy reference during your project.
    • Auto Calibration: Stanley stud finders often feature auto-calibration to ensure accurate results every time you use them.
  3. Accuracy:

    • Stanley stud finders are engineered to provide accurate results when detecting studs, metal objects, or live wires. However, it's essential to follow the manufacturer's instructions for optimal accuracy.
  4. Power Source:

    • Stanley stud finders typically use batteries for operation. Ensure that the batteries are in good condition to maintain accurate readings.
  5. Applications:

    • Stanley stud finders are commonly used in construction, carpentry, and DIY home improvement projects. They help locate studs for securely anchoring heavy objects to walls, such as shelves, mirrors, cabinets, and wall-mounted TVs.
  6. Portability:

    • These stud finders are designed to be compact and portable, making them easy to carry around the job site or store in your toolbox.
  7. Warranty:

    • Stanley often offers warranties on their stud finders, providing peace of mind and assurance of quality.

In summary, Stanley stud finders are valuable tools for both professionals and DIY enthusiasts, aiding in the precise location of studs, metal objects, and live electrical wiring hidden behind walls and ceilings.When choosing a Stanley stud finder, consider features like multi-mode detection, deep scanning capabilities, LCD displays, and AC detection to ensure that the tool meets your specific needs for your home improvement or construction projects.

Below you can find our editor's choice of the best stanley stud finders on the market
  

Franklin Sensors FS710PROProSensor 710+ Professional Stud Finder with Built-in Bubble Level & Ruler,Yellow

Franklin Sensors

Based on 3 reviews Check latest price

Product description

High accuracy: uses 13 sensors to give accurate readings every time; one-step operation: just press the button; when placed on wall LED lights instantly indicate studs; deep sensing: more sensor pad area than other scanners results in deeper scan; triple accuracy technology analyzes and triangulates data from all the sensors for highest accuracy; Built-in bubble level makes this 2 tools in 1!

  • Prosensor 710+ professional stud finder with built-in bubble level and ruler
  • Small
  • Yellow

User questions & answers

Question: does it detect floor studs under carpet and padding
Answer: Scan goes 1.5 inches on deep scan most subfloors are 1 inch plus carpet and pad.....my guess is no. Im guessing you need to add floor outlet. In that case look for hvac vents in floor to show orientation of floor joices. Best thing ive done is drill 1/8 inch hole and put long steel wire down through insulation then go in crawl to see if in between floor joices. Ive seen some electricians just drill it where homeowner wants floor outlet and if they hit joice they just drilled it out and installed floorbox to hide mistake. Most stud finders dont do good on flooring
Question: Does it work on metal studs
Answer: Yes.
Question: Our walls are 3/4 inch tongue and groove. Will this be able to detect through that
Answer: The ProSensor 710+ should detect through wood tongue and groove walling material.
Question: will it detect and show studs behind plaster and lath
Answer: This unit can detect studs through lath and plaster, but it is not guaranteed as it is on drywall. Because lath and plaster usually is usually thicker and less consistent, it could lead to some inconsistent readings. The multiple sensors and deep sensing capabilities on this stud finder give it a better chance on lath and plaster, but it cannot be guaranteed.

Product features

ProSensor 710

Unlike conventional stud finders which use only 1 or 2 sensors, the Franklin Sensors ProSensor 710 uses 13 sensors simultaneously to detect studs. This multi-sense technology eliminates the calibration step other brand stud finders require. Just put it on the wall and press the button. It's quick and easy.

The ProSensor 710 can detect multiple studs simultaneously. It accurately displays the center and edges of a stud at the same time.

Stanley FMHT77407 FatMax Stud Sensor 300

Stanley

Based on 179 reviews Check latest price

Product description

The STANLEY FMHT77407 FatMax Stud Sensor 300 featuring a backlit LCD screen which clearly displays all of the sensor's readings, even in low light conditions. AC detection identifies live wires up to 2" deep, along with Wood & Metal stud detection through up to 1-1/2" deep surface material. Also features a deep metal scan what sense metal through up to 3" of material. Its One Pass center-find technology is able to locate the stud center. This unit also features auto-calibration. The marking channel improves accuracy of marking-out readings. New ergonomic design, and soft grips provide comfort and control of the tool. Uses 9v Battery, not included.

  • Sequential LEDs and audible beeps indicate reading
  • Marking channel with LED identifies target and makes marking surfaces easy and accurate
  • Color: Yellow/BLACK
  • Backlit LCD screen to display sensor's readying, even in low light conditions
  • AC detection up to 2" deep; wood and metal detection up to 1-1/2" deep surface material
  • Deep metal scan senses metal through up to 3" of material
  • One Pass center-find technology to locate stud centers
  • Auto-calibrating unit

User questions & answers

Question: How useful is it
Answer: hi, my dad wrote a comment on this last time and he isnt here right now, but he talked to me about it and he ended up throwing it away- thats how bad it was. it didnt work for him at all. hope this helps.
Question: Does this device work AFTER it has been properly calibrated as per youtube video
Answer: Nope. I've tried everything. I've even exchanged it for a new one. I have an old Stanley 77-110 basic model stud finder which still works and finds studs that the fay max can't locate. I thought I'd upgrade and had my son buy me the Fat Max for my birthday, big mistake. Google it and see all the other disappointed owners, this tool should be recalled.

Zircon Stud Finder DIY/Pro StudSensor A100 Wall Scanner; StudScan Detects Edges of Wood/Metal Studs at 3/4” DeepScan Detects Wood/Metal to 1 1/2” Alerts Presence of Live, Unshielded AC Wire US Model

Based on 1 reviews Check latest price

Product description

The StudSensor A100 is Zircon’s newest edge locating electronic stud finder that is sold exclusively on Amazon. The A100 is designed with a smooth, ergonomic rubber grip allowing for a comfortable yet secure hold for any size hand, at any angle. This stud finder uses the most recent technology in density detecting software and circuitry. The scanner has 2 scanning modes to locate the edges of wood and metal studs and joists behind walls, floors, and in ceilings up to 1.5 inches (38 mm) deep. In StudScan Mode, the SS A100 locates the edges of shallower wood or metal studs up to 0.75 of an inch (19 mm) deep. Switch over to DeepScan Mode to double the scanning depth to 1.5 inches (38 mm). This stud sensor is programmed with a Wire Warning Detection feature that indicates the presence of live unshielded electrical wires up to 2 inches (50 mm) deep when using either stud scanning modes. Finding studs using this edge finding tool is simple. To get started, install one brand new 9V alkaline battery (not included). Place the unit flat against the wall and press the Power Button to calibrate the sensor. Once you hear a beep indicating calibration is complete, continue to hold the Power Button and slowly slide the tool across the surface. The easy-to-read LCD will alert you as the stud detector approaches the edge of the stud in both scanning modes. Once the edge is detected, the patented arrow-shaped SpotLite Pointer will shine, the translucent base will illuminate, and an audio tone will sound. DO NOT DRILL HERE! Instead, mark the spot in the “V’ marker groove at the head of the tool and continue past the stud. Repeat the process in the opposite direction and mark the opposite edge of the stud. The center of the stud is midway between the two marks. Make sure to note whether the Wire Warning Detection is alerting you to live, unshielded AC wiring before drilling between the two marks into the center of the stud. With the Zircon StudSensor A100, you can safely maneuver through the most complicated of projects with the professional confidence that comes from owning a Zircon.

  • The Zircon SS A100 electronic stud scanner is sold exclusively on Amazon and detects the edges of wood and metal studs up to 1.5 inches (38 mm) deep
  • Wire Warning Detection indicates the presence of live, unshielded electrical AC wiring while scanning in StudScan and DeepScan modes
  • Patented "over the stud" indicator and spotlite pointing system ensure the A100 provides trustworthy results
  • Ergonomically designed grip allows a comfortable hold on the tool for any size hand, at any angle
  • One fully charged 9V battery, not included, is required for the stud scanner to run at optimal performance to help you easily find studs and avoid hazards

User questions & answers

Question: Does it detect ceiling joist
Answer: Hello Donna. Yes, the A100 will locate ceiling joist. Thank you.
Question: What is the difference between e50 and A100? And which is better? Thanks
Answer: All i know is that e50 did not work for me. I tired both settings and gave me fake results. Directions are simple. Did not work. I drilled into space.
Question: Would this work on bathroom/shower tiles? Trying to install grab bars in the shower area
Answer: Hello Ashley. No, while the A100 can scan through tile sometimes the layers behind the tile, the hardi-backer board and glue, can be problematic. We recommend using the A200 on bathroom tiles. The A200 has an additional metal scan feature on it, if you are not able to get a consistent reading using the Studscan or Deepscan mode you can use the metal scan feature on this tool to find the nails holding the wall boards in the studs. Thank you.
Question: will this signal if there is a stash in the wall also, just like studs
Answer: haven't come across one in my walls yet.

Product features

Zircon StudSensor A100

The SS A100 is a handheld tool dedicated to quickly and efficiently find the edges of studs and alert you of live AC wiring. The A100 comes equipped with 2 scanning modes: StudScan and DeepScan.

Locate Studs and Scan for Live AC Wiring Safely and Efficiently

The Zircon StudSensor A100 makes scanning easy with its newly designed ergonomic grip. The tool's StudScan finds shallower wood or metal studs up to 0.75 in. (19 mm) deep. Slide the Mode Selector Switch to DeepScan Mode. This doubles the scanning depth to 1.5 in. (38 mm) deep and allows for increased accuracy on deeper targets.

The A100 also includes WireWarning Detection that automatically operates in StudScan and DeepScan Modes. This safety feature alerts you to the presence of live, unshielded electrical AC wires while scanning for studs.

Before use, always be sure to install a brand new 9V alkaline battery. Zircon stud finders, particularly those with screens, require and consume a great deal of current from batteries. For optimal performance, brand-new, recently purchased alkaline batteries with an extended expiration date, are strongly recommended for use in these tools.

Edge Finding

Before scanning, hold the A100 flat against wall and press the Power Button to calibrate. Be sure not to move the scanner while calibrating. After a short beep sounds, confirming calibration is complete, continue pressing the Power Button and slide the scanner slowly against the surface.

Be sure not to drill at the edge of the stud. Continue to scan the surface until the stud's center is detected.

The easy-to-read screen will alert you as the stud detector approaches the edge of the stud in both scanning modes. Once the edge is detected, the patented arrow-shaped SpotLite Pointer will shine, the translucent base will illuminate, and an audio tone will sound. DO NOT DRILL HERE! Instead, mark the spot in the “V’ marker groove at the head of the tool and continue past the stud. Repeat the process in the opposite direction and mark the opposite edge of the stud. The center of the stud is midway between the two marks.

The center of the stud center is the stud's most secure location. It is critical to drill in the center when mounting heavy objects.

StudScan and DeepScan Modes

Use StudScan Mode to find the edges of wood or metal studs up to 0.75 in. (19 mm) deep.

For best results, always start in StudScan Mode when looking for studs.

If StudScan Mode provides irregular readings the studs might be behind deeper than 0.75 in. (19 mm). Slide the Mode Selector Switch to DeepScan Mode. This doubles the scanning depth to 1.5 in. (38 mm) deep and allows for increased accuracy on deeper targets.

Note: WireWarning Detection works in both StudScan and DeepScan Modes. The WireWarning Detection Icon will flash when live, unshielded wires are detected.

WireWarning Detection

Safely Scan in both Modes

WireWarning Detection is a feature that is always on while scanning in StudScan and DeepScan Modes.

It alerts you to the presence of live, unshielded, electrical AC wires up to 2 inches (50 cm) deep.

As you approach an area with live AC voltage, a lightning bolt icon will display on the screen. This the WireWarning Detection Icon. If your scan directly starts over an area with live AC voltage, the WireWarning Detection Icon will flash.

Note: Please turn off the electricity and use extreme caution in areas where live AC voltage is detected before nailing or drilling.

Frequently Asked Questions

Question: Does the StudSensor A100 include a battery?

Answer: No. Zircon stud finders and detectors, particularly those with screens, require and consume a great deal of current from batteries. For optimal performance, a brand-new, recently purchased 9V alkaline battery with an extended expiration date, is not included but is required to properly power the A100.

Question: I inserted a 9V battery, but the tool doesn't turn on or is giving me strange readings. Is my tool broken?

Answer: Please be sure to use a fresh, brand new 9V alkaline battery with an extended expiration date. Batteries that may work in a smoke detector or remote control may not have adequate voltage to power the sensing technology in StudSensors.

Question: Does this tool need to be calibrated?

Answer: Yes, as with all Zircon tools, the StudSensor A100 needs to calibrate to the surface before scanning. Calibrating the tool on an empty wall gives the device a chance to measure the wall thickness and material density, as well as register factors like humidity, temperature, and even the minor electric readings from your hand, which all have an impact on the readings from the wall. Calibrating is easy and just takes a second. To calibrate, simply place the unit flat against the surface to be scanned and press the Power Button. When powering the A100 on, all the icons on the screen and the SpotLite Pointing System will briefly flash and the tool will beep. After this occurs, the screen will then clear and, depending on the selected mode, the words "StudScan" or "DeepScan" will remain, indicating that calibration has occurred and the tool is ready to begin scanning. It is important not to move the tool or begin scanning until the calibration process has taken place for the most accurate results.

Question: What is DeepScan Mode?

Answer: Unlike StudScan Mode, which scans through one layer of drywall up to 0.75 in. thick (19 mm), DeepScan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. DeepScan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. Extra layers in a wall can make it difficult to find studs in regular StudScan Mode. To minimize false positives and/or finding other objects further behind the wall that may not be a stud, always start your scan in StudScan Mode first.

Question: How can I be certain the objects found behind my wall are studs in DeepScan Mode?

Answer: DeepScan Mode has increased sensitivity so you may have located something other than a stud. Studs are equally spaced to either side (12, 16, or 24 in. apart) and typically run from floor to ceiling. To better confirm that what you found is a stud, check for other studs equally spaced to either side and for the same stud at several heights directly above and below the first stud indication. A stud reading would also measure approximately 1.5 in. (38 mm) apart from each edge. Anything larger or smaller may not be a stud if not near a door or window.

Question: Will this StudSensor A100 locate metal studs?

Answer: Yes, the A100 will locate metal studs in StudScan, DeepScan, and Metal Scan Modes. Since stud finders are looking for a change in density behind drywall, not a particular material, in StudScan and DeepScan Modes the detector will react to metal studs the same as it would for wooden studs. The A100 will locate wood and metal studs up to 0.75 in. (19 mm) deep while DeepScan Mode locates targets up to 1.5 in. (38 mm) deep.

Question: Why does the tool beep and the lights flash when scanning for a stud?

Answer: The tool could've been calibrated over a stud, calibrated on a dense part of the wall, or the back of the unit may have slightly lifted or tilted during the scan. Move the StudSensor A100 over a couple of inches to the left or right, re-calibrate, and start your scan again.

Question: What is WireWarning Detection?

Answer: WireWarning Detection is a feature that is always on while you are scanning in StudScan and DeepScan Modes to alert you to the presence of live, unshielded electrical AC wires up to 2 in. (50 mm) deep. As you approach an area with live AC voltage, a lightning bolt icon will display on the screen. This is the WireWarning Detection Icon. If your scan directly starts over an area with live AC voltage, this icon will flash. PLEASE TURN OFF THE ELECTRICITY AND USE EXTREME CAUTION IN AREAS WHERE LIVE AC VOLTAGE IS DETECTED BEFORE NAILING OR DRILLING.

Question: Why does the area of voltage appear much larger than an actual wire?

Answer: Static charge may develop on drywall, spreading voltage detection as much as 12 in. (30 cm) laterally from each side of an actual wire. To narrow detection, turn the tool off and on again at the edge of where the wire was first detected and repeat the scan.

Question: I suspect electrical wires in a certain area when I scan, but why am I not detecting any?

Answer: Wires may be shielded in metal conduit or behind a metallic wall covering. It could also be that the wire is deeper than 2 in. (50 mm) or that the wire may not be live (hot). Always exercise extreme caution when working near electricity.

Question: Does the A100 work on wood paneling and other wood surfaces?

Answer: The A100 is optimized to scan through standard interior sheetrock / drywall (gypsum) construction. This tool will work on wood, plywood, wood paneling and particle board up to 1.5 in. (38 mm) thick when in DeepScan Mode.

Question: Will the A100 work on textured wall surfaces, acoustic ceilings, or wall paper?

Answer: Yes, the A100 will work on textured surfaces and dried wall paper as long as it does not contain any metallic foil or fibers. For highly textured walls or acoustic ceilings, place or tape a thin piece of cardboard onto the surface to be scanned. Recalibrate and scan over the cardboard in DeepScan Mode.

Question: Can I use this tool to find studs behind carpet?

Answer: No. Zircon tools are designed for hollow interior walls. They will generally work well to find studs or joists through a plywood subfloor, after the carpeting/flooring has been removed.

Question: Will the A100 work on ceramic tile?

Answer: While the StudSensor A100 may be able to scan through ceramic tile in DeepScan mode to locate studs, the many variable layers behind tiled surfaces make it one of the more difficult scanning environments.

Question: Does this StudSensor work on lath and plaster?

Answer: No. Due to irregularities in plaster thickness, this tool is not recommended for use on lath and plaster.

Question: Can I use this tool to scan the outside wall of my house?

Answer: No. Zircon StudSensors are designed and recommended for interior use only.

Question: I'm planning to mount my new flat screen TV to the wall. Will this tool help me?

Answer: Yes. The A100 is ideal for basic home or office projects. The center-finding technology allows you to easily find and mark the center of the stud for secure mounting of TV's and AV equipment, closet or garage shelving, heavy mirrors, light fixtures, coat racks and more.

Question: Is the tool waterproof?

Answer: No. The StudSensor A100 is splash and water resistant, but not waterproof.

Question: What is the difference between magnetic and electronic stud finders?

Answer: Magnetic stud finders are simply magnets that look for anything magnetic behind a wall. Typically, they are advertised to find screws or nails that hold the wall surface to the studs. However, nails often times are not placed in the center of studs, making it difficult to determine where the stud's center is or how wide the stud is.

Electronic stud finders, such as the A100, on the other hand, operate by detecting density changes behind a surface (like a wall) and will clearly and precisely indicate the edges and center of a stud. The center of a stud is the most secure location when mounting anything heavy. For applications like mapping out floor joists, electronic stud finders have an advantage over magnets because they are not attracted to nails holding floor boards to a subfloor, as well as nails in joists.

Question: Does the StudSensor A100 come with a warranty?

Answer: The StudSensor A100 includes limited one year warranty when fulfilled by and shipped from Amazon.

Question: Where can I get help using my StudSensor A100?

Answer: Zircon's team of Tool Pro Experts provide superior customer service. They know the ins and outs about tools, construction, and the challenges that DIYers and professionals face. Rest assured, at Zircon you can reach live, knowledgeable, honest people who want to work with you. Call the toll free Customer Support Number 1-800-245-9265 Monday - Friday, 8 AM - 5 PM PST to speak with an expert today.

Zircon also provides support via an online 24/7 interactive support center, step-by-step instructions, how-to videos, and online engagement. Visit Zircon's website today.

Stanley 47-400 Magnetic Stud Finder

Stanley

Based on 436 reviews Check latest price

Product description

Stanley 47-400 This Magnetic Stud Finder is 1-3/8" x 1-3/8" x 1-1/4"(35mm x 35mm x 32mm). Provides dependable detection of wall studs. Magnet works by locating steel nails and screws used to hold drywall to studs. Base of the stud finder is notched for convenient marking once studs are located.

From the Manufacturer

Provides dependable detection of wall studs. Magnet works by locating steel nails and screws used to hold drywall to studs. Base of the stud finder is notched for convenient marking once studs are located.

  • Stanley - Black & Decker
  • Base of the stud finder is notched for convenient marking once studs are located
  • Limited Lifetime Warranty
  • Magnet works by locating steel nails and screws used to hold drywall to studs
  • Base of the stud finder is notched for convenient marking once studs are located
  • Limited Lifetime Warranty

User questions & answers

Question: Can you use this stud finder on the ceiling
Answer: I have not found a way for it to do that. When mine reaches the end of a countdown, it beeps and then starts counting up. It does not beep again unless I stop it, reset it, and start the countdown again. It sound like you are looking for a device that will signal you at a preset or user defined interval. I don't believe this device is capable of doing that.
Question: Some people recommend buying multiples of these. What is the purpose of that
Answer: I tested starting the stopwatch (count up) and I was able to change the mode and start a countdown while the stopwatch was still counting up. I could stop the countdown, reset it, and start a new countdown while the stopwatch (count up) continued.

SSI77-050 Advanced Stud Sensor,

Based on 94 reviews Check latest price

Product description

Detect wood/metal studs up to a 3/4" deep with the Stanley® advanced stud sensor. Features an LED display for studs and visual indicators on face of stud sensor for easy readability.

  • N/A
  • Detects wood/metal studs up to a 3/4" deep
  • Visual indicators on face of stud sensor for easy readability
  • LED display for studs

6 Pack Stanley 47-400 Magnetic Stud Finder

Stanley

Based on 19 reviews Check latest price

Product description

6 Pack Stanley 47-400 Magnetic Stud Finder - 6 PACK

  • Provides dependable detection of wall studs
  • Magnet works by locating steel nails and screws used to hold drywall to studs
  • Base of the stud finder is notched for convenient marking once studs are lo

BOSSTHT77404 - Stanley Stud Sensor 150

Based on 84 reviews Check latest price

Product description

BOSSTHT77404 - Stanley Stud Sensor 150

  • Stud_Finder_Type - Internal Capacitor-Edge
  • Power_Sources - 9V Battery sold separately
  • Pre-consumer_Recycled_Content_Percent - 0%
  • Post-consumer_Recycled_Content_Percent - 0%
  • Total_Recycled_Content_Percent - 0%

User questions & answers

Question: Is there any chance this will see 2x6 rafter beams thru a particle board roof and asphalt shingles? Trying to locate them for mounting a dish mount
Answer: It doesn't appear that it turns completely off anywhere.
Question: How do you calibrate this
Answer: I do not believe it is water resistant.
Question: I bought this stud finder to mount my flat screen but it screams ac through the whole wall any suggestions? Ty
Answer: I do not recommend this stop watch. It stopped working after one month of limited use.

Stanley Hand Tools STHT77406 9 Volt Handheld Stud Sensor

Stanley Hand Tools

Based on 40 reviews Check latest price

Product description

See through walls with the Stanley Stud Sensor. This device detects both wood and metal studs up to 3/4 in. deep and identifies wires up to 2 in. deep.

  • LCD screen clearly displays all of the sensor’s readings
  • Wood and metal stud detection through up to 3/4" deep surface material
  • AC detection identifies live wires up to 2" deep
  • OnePass center-find technology locates stud centers
  • Marking channel improves accuracy of marking-out readings

Stanley Hand Tools Stht77403 Stud Sensor

Based on 117 reviews Check latest price

Product description

Stanley 77-110 Intelli-Sensor Stud Finder is a handy tool everyone should have. It easily locates the edges of studs or joists through drywall and other common wall materials. The electronic audio and visual signals are emitted once the edge of the stud is detected. It has an automatic calibration switch for easy turn-on operation, and automatic shut-off for longer battery life. It features hHigh-impact, heavy duty ABS case, with non-marring pads for wall protection, and a pencil notch for marking stud edges. Pocket size for easy storage. Requires a 9 volt battery (not included).

From the Manufacturer

Pocket-size stud sensor detects and locates studs and joists up to a 3/4" depth. LED display and buzzer indicates stud edge. High-impact, ergonomically-designed ABS case includes pencil notch for pinpoint marking. Calibrates automatically for surefire accuracy. LED's include low battery warning. Requires 9-volt battery (not included). This product, launched in July 2003, was first available at participating Preview Dealer stores.

  • Stanley - Black & Decker
  • Used for Test & Measurement, Scanners
  • The product is manufactured in China
  • Pocket-size stud sensor detects and locates studs and joists up to a 3/4" depth
  • Pocket-size stud sensor detects and locates studs and joists up to a 3/4" depth
  • LED display and buzzer indicates stud edge
  • High-impact, ergonomically-designed ABS case includes pencil notch for pinpoint marking

User questions & answers

Question: What to find Battery. I didnt find in walmart homedepot. Help me with amazon link to buy it
Answer: While it is still running it shows the last lap time. During recall you can see all lap times.

Stanley Hand Tools 47-400 Magnetic Stud Finder

Based on 3 reviews Check latest price

Product description

Stanley Hand Tools 47-400 Magnetic Stud Finder - 10 PACK

  • .....

Stud Finder Sensor Wall Scanner - 4 in 1 Electronic Stud Sensor Beam Finders Wall Detector Center Finding with LCD Display for Wood AC Wire Metal Studs Joist Detection

Tavool

Based on 24 reviews Check latest price
  • The Most Accurate Wall Scanner- Tavool specializes in stud finder for years and adopts the most Advance Sensors Technology for accurately & quickly locating studs wood metal AC wires! In all modes, this wall scanner always detect and indicate the Live AC Wire. Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in this electronic stud scanner
  • 4 IN 1 Multiplication Plus Deep Detection - This digital wall scanner includes four different scanning modes for woods, beam, joist, metals, AC wires and deeply embedded objects behind floor, ceiling, wall. Stud mode detects wooden beams and joists in drywall up to 1.2 inches. Metal mode detects pipe , rebar, aluminum and copper up to 1.57 inches.Deep mode detects wood and metal parts located up to 1.77 inches while 85~240 volt AC current for voltage and live electrical lines up to 2.36 inches
  • Upgrade Design of LCD Screen - Displaying the Desired Stud Material As Well As the Precise Position of the Stud - The Tavool digital stud scanner features large LCD display together with the big sound to detect the accurate location of stud metal Ac wires. When find the material, the LCD display will indicate the direction and the intensity of sound tells whether you are more close to the target. The fast detection saves users time and efforts, making the task completion EASIER
  • Automatic Calibration and Ergonomic Grip for Comfortable Use - Turning on the stud finder and Completing Calibration. The automatic calibration before using provides users with maximum reliability and accuracy. Then put it on the wall. The wood beam finder will flash once it has picked up the edge of a stud.The ergonomic design of this wall stud finder makes it comfortable to hold from any angle
  • Professional Design with Top Quality - Tavool has been dedicated to Research and develop stud finders for many years, and we have a professional team and mature productions process. This stud joist finder wall detector can quickly locate the metal wood AC wire that are hidden in the walls, floors and ceilings of your house, help you find the exact stud while installing TVs, cabinets, garage shelves etc.

User questions & answers

Question: Is there an instruction manual online? I misplaced the manual that came in the box
Answer: Si puede solicitar un manual de instrucciones en [email protected]
Question: Will this locate studs behind bathroom tiles
Answer: If your tile wall has cement backer board, then this device will not work. If your tile is backed by sheetrock, then it will probably work unless your tile is took thick. I wouldn't trust it to locate pipes behind tile, so take care if you're working in a bathroom.
Question: Is the battery included
Answer: No the 9volt battery is not included.
Question: Can this detect a stud behind plaster walls
Answer: This tud finder can quickly locate metal, studs, joists, pipes, live AC wire behind all kinds of walls floors and ceilings but except the cement board wall, you can use it on popcorn ceilings, plaster walls, textured surfaces,etc

Product features

Stud Scan Detection

Deep Scan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. DeepScan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. To minimize false positives and/or finding other objects further behind the wall that may not be a stud, always start your scan in StudScan Mode first.

Metal Scan Detection

Tavool wall canner will locate metal studs in StudScan, DeepScan, and Metal Scan Modes. Since Tavool stud finders are looking for a change in density behind drywall, not a particular material, in StudScan and DeepScan Modes the detector will react to metal studs the same as it would for wooden studs.

After you detect the center of a object, Please Use Metal Scan to determine if the previous reading in Stud scan was a wood stud, metal stud, or pipe.

Live AC Wire Detection

AC Wire detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51 mm) deep. In all modes, this wall scanner always detect and indicate the Live AC Wire.

Note: AC Wire Detection works in both StudScan / DeepScan / MetalScan Modes. The AC Wire Detection Icon will flash when live, unshielded wires are detected.

Step 1:Calibrate the tool before every scan

After choose the mode, press and hold the scan button( on the side of the tool) to calibrate this tool. Wait for the reducing bars disappeared and beep to confirm calibration has completed.

In stud/deep mode, put it on the wall where you want to detect to calibrate it ;In AC/Metal mode, put it in the air to calibrate it.

Step 2: Scan the wall

Hold down the button, then move the stud finder along the wall slowly, if shake or lift the scanner accidently, the device needs to be re-calibrate.

The narrow on the screen togather with the beep signal alter, guides you to find the location of the stud.

Step 3: Find the location of the stud

When the signal bar is full and the beep alarm is loudest, it means you have found the center of an object.Mark it with your pencil.

Then choose the Metal Scan mode to test whether it is a metal. After you confirm that it is not a metal, it means that you found the center of a stud. (More details refer to the above description of "Metal Scan Detection")Then you can drill it to hang thing

CRAFTSMAN Stud Finder, 3/4-Inch Depth (CMHT77633)

Based on 2 reviews Check latest price

Product description

CRAFTSMAN Stud sensor works on surfaces covered in wallpaper and fabric. Edge detection to help locate stud edges of both wood and metal stud.

  • Depth range of 3/4 inch through drywall, works on surfaces covered in wallpaper and fabric
  • Edge detection to locate stud edges of both wood and metal stud
  • Shock resistant and water resistant body for durability and long life
  • Takes 9 volt battery
  • Full Lifetime Warranty, refer to "Warranty and Support" section below for full details
  • Battery not included

User questions & answers

Question: What kind of batteries does this need
Answer: This unit takes a 9 volt battery
Question: is it a good stud finder for mounting a TV
Answer: No, it isn’t a good stud finder at all. Spend $10 more at Lowes for one that actually works.

BLACK+DECKER Line Laser, Auto-leveling with Stud Sensor (BDL190S),Black/Orange

Black & Decker

Based on 1 reviews Check latest price

Product description

The item is Black & Decker BDL190S BullsEye Auto-Leveling Interior Line Laser with Stud Sensor . Used for Test & Measurement, Levels. The product is manufactured in China. Amazon.com The Black & Decker BDL190S BullsEye Auto-leveling Interior Line Laser and Stud Sensor Combination Tool is an ideal tool for hanging pictures, detecting wood and metal studs, locating live A/C wires, and installing decorative items. With patented auto-leveling technology, this leveler is actually two tools in one--an auto-leveling laser level and a stud sensor. Its auto-leveling laser levels automatically without adjustments and projects horizontal laser lines. Other features include a stud sensor to detect wood, metal, studs, and live A/C wires and an easy to read LCD display. Categorized as a class II laser, this laser level comes backed by a 2-year limited warranty.

The Black & Decker BDL190S BullsEye Auto-leveling Interior Line Laser and Stud Sensor Combination Tool is an ideal tool for hanging pictures, detecting wood and metal studs, locating live A/C wires, and installing decorative items. With patented auto-leveling technology, this leveler is actually two tools in one--an auto-leveling laser level and a stud sensor. Its auto-leveling laser levels automatically without adjustments and projects horizontal laser lines. Other features include a stud sensor to detect wood, metal, studs, and live A/C wires and an easy to read LCD display. Categorized as a class IIIR laser, this laser level comes backed by a 2-year limited warranty.

  • Two tools in one--an auto-leveling laser level and a stud sensor
  • Detects wood, metal, studs and live A/C wires
  • Patented auto-leveling technology
  • Easy to read LCD display
  • 2-year limited warranty
  • This is a Class 3R laser product, Power output ≤ 5mW
  • Laser Class IIIa, <5mW @ 633nm-670nm

User questions & answers

Question: Does it really come with a case? Some say it does, some say it does not. Which is it
Answer: The clear display package it comes in is considered to be the “case”. The display package opens up like a book once you cut the black band keeping the two sides together. If you’re expecting a traditional nylon case, then you will be disappointed. I was disappointed when I found out there was no nylon case, but the provided packaging works just fine for me now. Thank you.
Question: Can the device put out correct vertical lines if turned 90 degrees
Answer: No, only horizontally. When you go vertical the laser isn't a sharp line
Question: Does this come with a case
Answer: yeah, the plastic case it comes in is the case. Not a fan
Question: How does the unit afix to the wall
Answer: A hanger is included to attach to the wall

Product features

BullsEye Auto Leveling Laser

- BullsEye auto-leveling technology

- Two tools in one to simplify hanging and mounting projects

- Levels automatically for precise BullsEye results

- Projects horizontal level line

- Stud sensor detects wood and metal studs plus live A/C wires

- LCD Display Easy To Read

Latest Reviews

View all