10 best base tripods

Product description

Skywin VR Tripod Stand compatible with SteamVR Base Station 2.0, HTC Vive Base Station and Oculus Rift Constellation. Keep your VR experience hassle free with this telescopic adjustable stand from 2'4" to 7'5". The VR Tripod Stand allows you to position your sensors easily and folds away for storage.

• Up to 7 feet 6 inches when fully extended and 29 inches collapsed
• Adjustable ball head Special mounts included
• Compatible with SteamVR Base Station 2.0 , Oculus Rift Constellation
• Comes with two telescopic stands included. Base Station is not included
• Skip Wall Mounting your Base Station Sensors

User questions & answers

Question:	How big is the footprint
Answer:	Sometimes it doesn’t come with everything, one of my used trackers only came with the tracker, which doesn’t make sense because it’s completely useless without it and there’s no replacements for the accessories. So if you end up only getting the tracker, make sure you return it ASAP
Question:	Has anyone had an issue with the connectors that attach to the top of the tripod not screwing on correctly? mismatched threads
Answer:	If you're talking about Full Body Tracking for per say VRChat, then yes you need 2 for each foot and one for the hip.
Question:	What is the width of the base legs when extended
Answer:	No, the new Tracker is compatible with both the original Vive and the Vive Pro. In addition, its currently compatible with Lighthouse 1.0 basestations, and will be compatible with the Lighthouse 2.0 standard.
Question:	Do these come with actual sensors or are they just stands
Answer:	Yes, a pretty good one at that

Product description

The Orbit Brass Impact Sprinkler on Adjustable Tripod is ideal for watering large areas. Designed for dependability, impact heads have an uninterrupted water flow that are clog-resistant, even when used with dirty or reclaimed water from ponds and canals. Attached to an adjustable tripod, this sprinkler sprays up to a 90-foot diameter. Easily adjust the coverage from a partial section to a full circle. Features a deflector shield for distance adjustment and an anti-backsplash arm to aid in spray pattern and area coverage. A simple twist of the diffuser screw breaks up the water stream, creating larger or smaller water droplets. The tripod base adjusts from 22 to 48 inches in height and retracts to a small size for easy storage. The base connects easily to a 3/4-inch standard garden hose by a gooseneck attachment. The all-metal construction means it will hold up against the typical wear and tear that most impact sprinklers experience, giving you years of dependable use.

• LARGE-AREA COVERAGE: Sprays up to 90 feet in diameter, covering 6,360 square feet when set to a full circle
• HEAVY-DUTY BRASS: The brass construction can withstand high water pressures and severe weather conditions without the worry of breaking, rusting, or failing
• ADJUSTABLE COVERAGE: Easily adjust spray coverage from a partial section to full 360° watering
• CUSTOMIZABLE SETTINGS: Use the deflector shield and diffuser screw to alter the stream and change the spray distance radius.
• STABLE TRIPOD BASE: Metal, weighted tripod resists tipping and extends up to 48 inches to allow for adjustments as plants grow
• ANTI-BACKSPLASH ARM: Improves the sprinklers ability to spray water in a consistent pattern and in the desired direction
• RESISTS CLOGS: Flow-through design, resistant to clogs and ideal for secondary water
• EASY CONNECTION: Gooseneck connection makes it easy to connect to your hose.

User questions & answers

Question:	Can the upper part or the actual sprinkler be replaced? Do they sell the part individually
Answer:	Yes the upper sprinkler part is easy to replace and can be purchased at most stores that carry garden equipment.
Question:	How do you set it for full circle
Answer:	You can have full 360 rotation by lifting the metal tab that normally engages with the stops on the sprinkler head. That tab moves with the sprinkler head and if you lift up on it, positioning it from a vertical to horizontal, the sprinkler head will no longer engage with the stops and travel a full 360 degrees
Question:	How many gallons per hour does the head deliver? How long does it take to put 1 inch water on a circle
Answer:	For a very rough estimate you would want to figure out your area to be covered by using (pardon the lack of proper symbols) Pi*R squared. Then you want it to be one inch deep so 1/12= 0.83333 and then there is approximately 7.48 gallons of water contained in a cubic foot. Lastly calculate the flow rate of water out of your house per minute, which will probably be 17-23 gallons per minute. An example for 300 hundred square feet would look like this. 300*0.8333=2525*7.48=187 gallons of water to cover 300 square feet under 1 inch of water. Since it would be incredibly difficult to calculate the flow rate and coverage of the sprinkler we will have to guess and use the flow rate number as a guide. The flow rate out of the sprinkler will be lower so if you had a flow rate of 18 gpm I would reduce it by a third, giving you approximately 12 gallons per minute.187 gallons / 12 gpm would give you 15.58 minutes or approximately 15m 35s. I also bet that it is way off from what it actually is and probably is longer and impacted by the wind too.I found this link afterwards which might help you out further and it looks like it calculates most things for you too.http://www.seametrics.com/blog/water-calculators/
Question:	Can this be set up so that it doesn't rotate but stays stationary? I want something that can stand on concrete and aim hose at one spot
Answer:	the rotate controls allow you to set it from a fixed angle to 360 degrees

Product features

Adjustable Watering for Ultimate Flexibility

Orbit's popular brass impact sprinkler on tripod base is perfect for large lawns and growing gardens. It towers over tall plants, and features a brass impact head that’s capable of spraying distances up to 100 feet.

It's important to have a sprinkler that can fit the changing needs of your plants that are constantly growing. Totally adjustable, this sprinkler can meet those needs. Set the distance and the arc radius from 0-360 degrees. Coverage is fantastic for everything near and far.

Easy Setup and Storage

This Tripod has been designed for easy set up and storage. Adjustments only take seconds. The three legs are adjustable from 25 to 48-inches using the ergonomically designed clamps, allowing you to position the tripod at the perfect height without any hassle.

Convenient Swivel Attachment

The goose neck hose attachment means no awkward fiddling with hose connections. It’s ideally angled to connect in seconds, using a gasket sealed, brass twist connection. Storage is simple too. The entire unit folds up nicely to a compact size and stores well.

Durable, Anti-Tipping Design

This tripod has been designed to resist tipping and keep your sprinkler watering for long periods of time. Using heavy-duty metal construction, the tripod legs become firmly planted on the ground, resisting the force of the powerful spray created by the brass impact head.

All-in-One Solution to Keep Your Plants Green

- Ideal for large lawn areas

- Brass impact head easily adjusts from 25 - 360 degrees

- Distance adjustment up to 100 ft.

- Anti-backsplash arm

- Brass swivel for connection with 3/4" standard hoses

- 1/2 in. male threaded brass impact head

- Adjustable 25 in. to 48 in. tripod base

- Up to 80 psi operating range

- “Gooseneck” shape for easy hose connection

Hose Faucet Timer

A good sprinkler is a great start, but make sure you take a look at hose watering timers before you go. You'll never have to worry about manually turning the water off again.

Garden Hose

Now that you've picked out your sprinkler, get a professional-grade garden hose that's durable and long enough to reach all the way back to your hose faucet.

Hose-Y Adapter

Sometimes you may have more than one area that needs water. A splitter or adapter gives you flexibility so you don't keep having to move back and forth every time.

Product description

Description:

It is one of professional photography accessories. Widely-used for precise leveling in portrait video shooting.

Well constructed by aluminum alloy material for ensuring a long time use.

3/8" male top Stud and 3/8" female bottom Socket.

Fit all tripod with 3/8 screw and all equipment with 3/8 screw hole.

Specifications:

Material: Aluminum Alloy

Maximum Height: 1.9"/48 mm

Minimum Height: 4.57"/40 mm

Adjusting Angle: +/- 5 degree

Net Weight: 0.44 pound/0.2 kilograms

Load Capacity: 33.1 pounds/15 kilograms

Package Content:

1 x Leveler Leveling Base

• This Leveler is designed for easy and precise leveling in scenery portrait video shooting
• Its 3 adjustment dials enable the operator to make fine, finger tip adjustments up to +/- 5 degrees to ensure the camera is perfectly level. The dials also have locking rings to ensure stability once the right position is reached
• Well made by aluminum alloy material, CNC precision machining with surface oxidation treatment which ensure long service life
• With maximum load capacity 33.1 pounds/15 kilograms; lightweight design with weight about 0.44 pounds/0.2 kilogram; Ideal for outdoor travelling photographers
• Designed with 3/8" male top stud and 3/8" female bottom Socket. Compatible with different kinds of tripods

• INCLUDES 6 COMPONENTS AND CARRYING POUCH: Telescoping Monopod constructed of lightweight aluminum with rubber grip handle, Fluid Monopod Base encased in heavy duty non-skid rubber, Mini Tripod with non-skid feet and metal reinforced legs, 360 Easy Twist Ball Head with padded mounting plate, Cell phone mount that extends up to 100mm, and GoPro Mount.
• VERSATILE WITH MULTIPLE FUNCTIONS: Shoot low angle photos and macro photography with Tripod + Ball Head; Place Tripod + Ball head + Cellphone Mount on a tabletop for video conference calls; Position Tripod + Monopod + Ball head + Cellphone Mount on the floor for seated portraits or calls; Use Monopod + Ball Head + Cell Phone Mount as a Selfie Stick or shoot from different angles; Do street photography or at kids’ events with Monopod + Fluid base + Ball Head + Cell Phone Mount.
• PREMIUM FEATURES: Monopod has five sections and extends from approximately 10.5 inches to 46 inches; Easy Twist Ball Head has a bubble level and allows a 360-degree angle that locks into any position; Twist lock with contoured knob makes it very easy to lock cameras in place.
• UNIVERSAL COMPATIBILITY: Fits cellphones, compact cameras, 360 cameras, and GoPro and other action cameras; Can be used with any camera that has a ¼-20” screw. BONUS: Can even be used to mount an LED light or a flash.
• SATISFACTION GUARANTEED - Backed with the Digital GOJA 90-Day 100% Satisfaction Guarantee.

User questions & answers

Question:	Can the large plastic head be removed for use with 360 cameras
Answer:	Yes!
Question:	What’s the base width? with separate mount can i use at half height w/ ipadpro 12.9”. want for: 1) tabletop pics & 2) chair reading
Answer:	With the tripod base itself fully expanded, it measures about 7 & 3/8 inches between each leg (in width) and about 9.5 inches (in width) if you have the leg expanders pushed out on each individual leg. As to a 12.9 inch iPad balancing atop with this tripod being halfway extended in length and being attached to the base, it'll definitely become top heavy and I would think have a high probability of tipping over very easily. I sat in my recliner with this tripod setup and extended it as if I were to read myself. The first thing I noticed is the ease of tipping over even with my small 7" x 4" Tablet. It "might" be ok if you never bumped it when using it such as this, but I personally wouldn't recommend it. I've used this Tripod for a while now and I really like it, but you have to babysit it when it's extended. I always keep one hand on it when using it whether it's in monopod form or tripod form. It doesn't matter if my camera is attached or something as small as my cellphone which is a Note9...I never take my hand off of it. Now, if you are using the base itself to mount the iPad directly to and setting it on tabletops/countertops, then yes. It's very sturdy and I would recommend use that way.
Question:	How can you take pictures with it as a selfie stick if there is no remote or button on the stick for picture taking
Answer:	If your phone has a timer, you would have to set it and get in position in front of your device before the timer comes on. Or if you have a remote for your device.
Question:	Is the 6-in-1 in tripod mode stable fully extended 55"? also does the 6-in-1 come smell free, I'm very sensitive and noticed some reviews about that
Answer:	You do not want to have the tripod unattended when full extended. It will blow over in the wind, but with a smaller camera like GoPro etc, not too much of any issue. But stay near it. As for smell, it has less order than the people you are taking the pictures of.

Product features

Monopod

• Twist counter-clockwise to release and choose any length
• Extends from approximately 10.5 inches to 46 inches
• Lightweight aluminum monopod with rubber grip
• Bottom has ¼-20” screw (can attach to the tripod and or monopod base)
• Top has ¼-20” threaded screw (can attach the ball head and/or GoPro/cellphone mount)

Tripod

• Adjustable leg angles. Press and slide the black knob on the inside of each leg to adjust height
• Made of strong plastic with metal on the interior to provide support.
• Top has ¼-20” threaded screw (can attach the ball head/monopod/GoPro/cellphone mount)

360 EZ Twist Ball Head

• Made of heavy-duty plastic with metal ball head
• Twist lock mounting makes it very easy to lock cameras in place
• Mounting plate has rubber padding to prevent scratching and bubble level to ensure it is level
• Allows a 360-degree panoramic angle that locks into any position

Fluid Base

• Fluid ball head with mounting screw in rubber base/foot

Cell Phone Mount

• Strong plastic with rubber-lined interior corners to protect cellphones
• Has ¼-20” screw to attach onto the tripod/ball head/monopod
• Extends up to 100mm

GoPro Adapter

• Heavy duty plastic with screw to fit GoPro and other action cameras

• 📹 Red Dot Design Award Winner: IFOOTAGE Corba 2 Series Monopods; 2017 Red Dot Design Award Winner (product design award); designed for easy operation and longevity. This monopod is ideal for travel and outdoor shooting.
• 📹 Detachable Design: 4 section design allows for flexibility in use. Our award winning quick release plate and removable trippod stand provide 3 options: 1) Fixed video monopod with adjustable feet, 2) Portable monopod, 3) Low angle camera pod for a variety of uses.
• 📹 Telescopic design: Award winning buckle design make it to easy extend from 5.3 inches to 71 inches. Suitable for all SLR, DSLR, Video Cameras plus Camcorders up to 22 lbs. Premium materials with Carbon fiber, more lightweight, more max load weight.
• 📹 Pivoting Tripod: The monopod base enables 360° swiveling, 90° tilting in all directions and allows easy switches from landscape to portrait modes.
• 📹 Quick Lock and Unlock Release: Single hand operation. No buttons, no twisting, just a simple slide down to release and slide up to lock.The perfect suitable fluid head with ASIN: B07GR211GZ.

User questions & answers

Question:	how difficult should the quick reales be to screw into sony A7iii? Does not seem to want to go on straight for me
Answer:	I haven’t tested with that camera. However I was looking to get that camera. Might need an adaptor. I’m currently using it with an Sony AX-53 and have no issue. Have you tried just attaching the quick release plate by itself?
Question:	Is the Manfrotto 502AH too big for it
Answer:	please check the screw hole of your manfrotto 502AH is 3/8" or 1/4", the screws of our monopod is 3/8" and 1/4" changeable. It can support both 3/8" and 1/4" screw hole.
Question:	Does this work as a monopod for the Go Pro 360 Max
Answer:	It should. I use it with the Ricoh Theta V 360 camera all the time and love it. It’s the best monopod I have ever used!
Question:	will this work with zhiyun Crane
Answer:	It is working perfectly with My Pilotfly h2.

Product features

IFOOTAGE Cobra 2-C180

Lightweight, highly durable, quick and easy to set up -- IFOOTAGE offers three adjustable feet and IFOOTAGE’s patented quick release system on our new 3-in-1 monopod. One minute it’s a true monopod reseting on its removable rubber foot, the next it’s standing tall on it’s own three feed allowing 360° controlled movement via its tension control/lock at its base. Traditional tripods now have a serious rival!

Product description

Specification:





Material: Metal

Weight: 153g

Length 18.5cm

With 1/4 inch universal interface



Package includes:



1 x Metal Tripod

• Made entirely of Metal, top quality, solid and stable.
• Pocket size, easy to carry.
• With non-skid rubber feet.
• Portable and Multi-Use. Meeting various shooting needs in outdoor or indoor.
• Suitable for Smooth 4, Crane Plus, Crane 2, Osmo Mobile, Ronin-S, Vimble 2, Gimbal Handle Grip Stabilizer and All Cameras which have 1/4 inch screw.

User questions & answers

Question:	What kind of metal is the pegs made from? Aluminium? Are the legs hollow or solid
Answer:	A lot of beads. We followed the directions and used 1 capful and it filled it completely, enough left over for at least 20 more refills. Careful where you place it it becomes very heavy, we used a snack table on wheels. You can also put them in balloons to make squishy balls. My Grandaughter loves the sensory feeling when She puts Her hands in. The little sea animals are a great addition. Great product.
Question:	how many inches does each leg extend from the center point to the tip of the leg
Answer:	Yes it includes the blow up "pool", water beads, and the sea creatures. I have not counted them but I'm going to say about 12-15 figures.
Question:	Will this stand hold a 14in ring light
Answer:	No, the beads soak the water all up. It comes with lots of extra beads, they swell very fast!
Question:	Does it include the pictured phone adapter
Answer:	It doesn’t. But it’s really simple. You just put as many of the beads as you want in the blow up pool (I wouldn’t put the whole container in), add water and the beads will expand. I didn’t realize it took awhile for it to happen so I recommend letting them sit in the water over night.

• ALL-IN-ONE PROFESSIONAL SELFIE STICK & BUILT IN TRIPOD : No Need For A Separate Selfie Stick And Tripod. Great For Group Photos, Facetime, Adventure Shots, Instagram, Facebook Live, Vlogging.
• ULTRA EXTENDABLE AT 51", HARDLY TELL IT IS A SELFIE PICTURE! : Quick Flip Locks – No Twisting To Lock - Wobble Free Selfies - Toughest Material, Durable / Non-slip sure grip rubber handle. **REMOTE SHIPS IN HANDLE FACE DOWN, REMOTE IS NOT MISSING.
• FAST CONNECTING WIRELESS BLUETOOTH REMOTE : Compatible With Different Devices. iPhone, Android, Digital Camera (Bluetooth may be incompatible with some cameras) - Compatible with iPhone iOS and Android 4.3 or newer (*iOS has no zoom feature. *Zoom works on limited Android devices, Bluetooth remote incompatible with Go Pro) Rechargeable Battery, 300 Hours Standby, 1 Hour Full Charge. **REMOTE SHIPS IN HANDLE FACE DOWN. IT HAS 4 SCREWS.
• BUILT IN TRIPOD TO CAPTURE EVERY MOMENT : Extend The Feet On The Tripod And You Now Have A Standalone Selfie Stick. Equipped With Non- Skid Feet, For More Safety And Reliablity. Great For Lectures, Sporting Events, Presentations. ** Zoom Keys May Not Work With The Latest Google Pixel Phones.
• TWO AWESOME GIFTS IN ONE : What A Great Surprise To Get A High Quality Professional Selfie Stick And Tripod For The Same Price. Everyone can use it and will love it. Friendly Customer Service From Our Houston,Tx Office.

User questions & answers

Question:	Sirve para Samsung S
Answer:	Si, el selfie stick sirve con el Samsung S9+.
Question:	How can I hold the iPhone at an angle
Answer:	The mount is adjustable and it tilts as well as rotates so you will be able to hold it at any angle. Hope this helps :-)
Question:	Does it work for cameras as well? Do we have to purchase a screw or adapter
Answer:	The tripod has a screw after you remove the phone adapter
Question:	Can the phone mount be removed to reveal a standard 1/4" tripod screw
Answer:	The phone mount is removable and a tripod screw is revealed, but I'm not sure if it is 1/4". However, I attached my Panasonic point and shoot camera to the mount, which I used to put on a standard tripod before it broke.

Product features

What's In The Box?

• 1 - Selfie Stick
• 1 - Bluetooth Remote
• 1 - Charging Cable
• 1 - Phone Mount
• 1 - Manual
• 1 - Carrying Bag

Fun, Functionality And Performance

The Fugetek FT-569 All In One Selfie Stick / Tripod is designed with FUN, FUNCTIONALITY and PERFORMANCE in mind. The highly adjustable and removable mount, insures you will have universal compatibility for your phone and other devices. Plus, a built in tripod base allows for more flexibility and variety of pictures.

Product description

Easy and precise leveling. Lightweight 7.4oz (210gr). Height: 39mm. Max Load 5kg (11lb). 3/8" male top Stud and 3/8" female bottom Socket. All metal (aluminum) except for rubber mat.

• Easy and precise leveling
• Lightweight 7.4oz (210gr).
• 3/8" male top Stud and 3/8" female bottom Socket.
• All metal (aluminum) except for cork mat.
• Desmond Brand

User questions & answers

Question:	Can I mount a Celestron Mak 90 to this tripod
Answer:	It certainly has enough strenght to do it but it's height is not so impressive at between 2 and 3 inches. The legs are wide so it will be stable. It's a very nice product for its price with very construction quality but it is short.
Question:	Will this work with the canon sx 530 hs
Answer:	Mine didn't come with anything else. I find this tripod to be amazingly stable, I never worry about an accident tip over when I'm using it, even with some heavy gear on it. I've used it with my gimbal, a Smooth Q, and with video cameras on a extension stick.
Question:	Do you sell just the rubber leg stoppers? One already fell off and rolled down a hill
Answer:	You could accomplish that by removing the 3/8" bolt and replacing it with a 1/4" bolt and a 3/8 to 1/4 reducer.
Question:	Can this tripod hold a ue megaboom
Answer:	IYou should still be able to see the bubble level. the distance from the center screw to the level is about 1.25".

Product description

Description:

This tripod monopod is made of Aluminum Alloy with durable and solid construction.

It is great and helpful for shooting when you travel outdoor, and also can be used as alpenstock.

15 degree tilt of stand base can help monopod achieve 360 degree panoramic rotation.

5-position leg adjustment system provides flexible shooting (25-22-19-16-13mm).

The included stand base can support monopod well, and offers great convenience to adjust different angles when you are shooting.

With its light weight, it is easy to carry when travel outdoor.

Specifications:

Material: Aluminum Alloy, Rubber Pad (Three feet of stand base)

5 section tube Diameter:25-22-19-16-13mm

Load Capacity: 11 lbs/5 kg

Net Weight:1.3 lbs/0.6 kg

Maximum Height: 66"/168 cm

Minimum Height: 20.5"/52 cm

Monopod Top Connection Screw: 1/4"

Monopod Bottom Screw Thread: 3/8"

Package Contents:

1 x Monopod

1 x T222 Stand Base

User questions & answers

Question:	Can this take a fluid head
Answer:	Yes
Question:	What is the purpose of the feet? They cant hold s csmera up
Answer:	The feet are to keep the support upright while you mount the camera. If it didn't have feet you would have to lean it against something. There are monopods that have sharp ends to push into the ground, if you are hiking and want to push into soil but I preferred the one with feet because I might use it in other places.
Question:	I have a panasonic lumix fz-300, but don't see it mentioned in the list of cameras for this monopod. any reason the lumix wouldn't work
Answer:	I don’t even know why there would be a list of cameras, yes it will work
Question:	Is it stable enough to support a small 360 camera at maximum extension without any help
Answer:	yes, although if the ground is not level it is a challenge.

Product description

Micro-adjust Metal Laser Level Adapter Base

Specifications:

Item weight: 14ounce (392g)

Item size: 4 *4 *4 in (105 *105 *105mm)

Material: aluminum, metal

Thread Mount Size: 

1/4 inch male thread for laser level, 5/8 inch female thread for tripod

Multi-Directional Setting:

This practical accessory features fine adjustment of the laser line for positioning.

With the micro knob, user can make a 360 ° rotation clockwise or counterclockwise.

The X-axis knob and the Y-axis knob help user adjust the horizontal position back and forth, left and right.

Package lncluded: 

Laser Level Adapter Base *1

AHBLQD provides a high standards of service, 30-day money back guarantee. If you have any questions about the product, please contact us.

• 【Micro-Adjust Fine Knobs】 The micro rotary knob enables devices to make 360°adjustment. The X rotary knob and Y rotary knob can be used to adjust horizontal position while working.
• 【Height Adjustable and Built-In Horizontal Bubble】 Users can adjust the height by rotating the three legs of the adapter even on a tilt surface.The Built-in Horizontal Bubble View Level can help you adjust the angle and accuracy.
• 【1/4 Inch Male Thread and 5/8 Inch Female Thread】 1/4 inch male thread for laser level, 5/8 inch female thread for tripod or other tool.
• 【Durable Metal Material】Durable aluminum material can prevent oxidation and rust, metal bearings make it more stable and durable.
• 【Wide Applications】 Compatible with all Laser Level Devices and all devices with 1/4 "-20 female thread at the market.

User questions & answers

Question:	x ?? - What is the thread count on this 5/8" female? Is it
Answer:	Legs arer 6,5 inches or 16,5 cms. Tripod is low. Base with the screw is just 2,5 inches so it is VERY stable, een with heavy DSLRs. Of course you would need a ball head to get to some angles and rotate your camera but it isw a vry sturdy product at a ridiculous price. Recommended.