12 best linear motion sensors

Product description

Description:



Condition:100% brand new and good quality

Use: This PIR motion sensor can automatically and quickly open various types of incandescent, fluorescent lamps, buzzer, automatic doors, electric fans, automatic washing machine and dryer Machines and other devices, is a high tech products. Especially suitable for enterprises, hotels, shopping malls, warehouses and family aisles, corridors and other sensitive Sense of region, or for the security zone automatic lighting, lighting and alarm systems.

Also, it can work with Arduino or Raspberry Pi projects

As per the HC-SR501 data sheet, stops detecting ("detection range is shorter") as temperature approaches 30 degrees celsius (approximately 90 degrees fahrenheit).

These units have the through-holes to add a thermistor to improve high temperature performance, if one has a thermistor to add.

Easy to set up. Pins fit well into female Dupont wires for prototyping.

Features:

Product Name: HC-SR501 Body Sensor Module

Operating voltage range: DC 4.5-20V

Quiescent Current: <50uA

Trigger: L can not be repeated trigger/H can be repeated trigger(Default repeated trigger)

Delay time: 0.5-200S(adjustable) the range is (0.xx second to tens of second)

Block time: 2.5S(default)Can be made a range(0.xx to tens of seconds

Board Dimensions: 32mm*24mm

Angle Sensor: <100 ° cone angle Lens size

HC-SR501 Sensor Diameter:23mm(Default)



Package Included:

5 X HC-SR501 PIR Infrared Sensor



Questions

Q: What is the level output of these?

Q: I connected this to raspberry pi (5v) and it randomly activate without any movement. Is that normal?

Q: What is the delay adjustment and how to change it using the small dial?"

Q: Will it control 12 volt mini LED lights in my kitchen cabinets?



If you're interested in these questions, please contact us for the answers.

• 🚩 This HC-SR501 PIR motion sensor can turn on devices by detected motion. Automatically and quickly open various types of incandescent, fluorescent lamps, buzzer, automatic doors, electric fans, automatic washing machine and dryer Machines and other devices.
• 🚩 Using Potentiometer 105, output timing is from 0.5S to 200S. Operating voltage range: DC 4.5-20V，Quiescent Current: <50uA Trigger: L can not be repeated trigger/H can be repeated trigger(Default repeated trigger)
• 🚩 Usage: HC-SR501 can use as a hightech products. Suitable for companies, hotels, shopping malls, warehouses and family aisles, corridors. Or use for the security zone automatic lighting, lighting and alarm systems
• 🚩 How to email us? Please click “Stemedu”(you can find "Sold by Stemedu" under Buy Now button), in the new page, click “Ask a question” to email us

User questions & answers

Question:	Is there a case / enclosure for this
Answer:	They were too small for my sprayer, I don't know the maker of mine they just look ok in the pictures.
Question:	do the jumpers have to be soldered
Answer:	That tip should fit on any smith sprayer with the right connectors. As far as a RoundUp sprayer I don't know.
Question:	What is the spacing on the 3 header pins? (Ground, Signal, Power
Answer:	I don't own a round up sprayer so I don't know.
Question:	Is there a place to add photo resistor in the board
Answer:	I wouldn't bet on it.

• 5000 KELVIN & 130 LUMENS PER WATT - Hyperikon’s LED Highbay is a high output light fixture which produces a crystal white light of 5000K and has lumen count of 62,000! This garage light will provide superior brightness to any indoor area with high ceilings like garages, warehouses, and workshops.
• 45,000 HOURS & ENERGY EFFICIENT- Hyperikon’s High Bay LED Lighting is the perfect fluorescent and halogen replacement, swapping 1150W for 480W! In addition, this Linear LED Fixture has a lifetime rating of over 45,000 hours, reducing maintenance costs and lasting for years to come.
• PIR MOTION SENSOR INCLUDED - The motion sensor gives this linear high bay light a great versatility.With a detection range of up to 16ft and a beam angle of 110°, our LED outdoor light has a wide area coverage.Once installed, follow the manual guide to learn how to use the knobs and adjust the light's settings
• UL-LISTED – Certified to deliver the quality, performance, and savings. This hi bay light has been tested and listed by the Underwriter Laboratories’ meaning it has met their nationally recognized safety requirements. UL Number: E475117, Model Number: HyperBayF480W-50S.
• 5 YEAR WARRANTY - You are always covered by our 5-year warranty when you purchase Hyperikon products.

Product features

STURDY LIGHTWEIGHT BUILD

Hyperikon’s new High Bay Fixtures are the premier choice for lighting up garages, warehouses, work areas, indoor sports arenas, storefronts, and more. The full aluminum body design allows for a lightweight yet sturdy build. This makes for easy installation with the included hardware and gives assurance that the light will stay put and shine bright for years to come.

INTEGRATED MOTION SENSOR

The included motion sensor wires directly to the light and detects motion up to 80 feet away to power the light on for added convenience automatically. To ensure your safety and comply with state laws, our High Bay Fixture dims 10% after 30 seconds of inactivity. This High Bay fixture packs an impressive minimum of 129 Lumen/watt and is sure to fill your entire space with light while using far less energy than its fluorescent, HPS, and HID counterparts.

• 360° PIR Ceiling Mount Occupancy Sensor, Automatically turns light ON/OFF, Mount up to 15 Feet High
• Voltage: 120V~277AC, 60Hz, Max load: 800W@120V, 1200W@277V, 1/6 HP, No Minimum Load
• LED, Incandescent, Electronic Ballast Fluorescent, Compact-fluorescent(CFL), Magnetic Low-voltage(MLV) & Electronic Low-Voltage(ELV) Compatible
• Adjustable time delay from 15 Sec to 30 mins, Adjustable sensitivity, Adjustable light level sensing
• UL Listed, Neutral Wire Required, Indoor Use Only, Wire Nuts and Screws included, 1 Year Warranty

User questions & answers

Question:	Can more than one of these be wired together to provide coverage for a larger area
Answer:	the size is metric M3
Question:	what is the maximum detection distance with 100% sensitivity, sensor mounted on 8 foot ceiling
Answer:	I don't use this for CN purpose, I plan to use it for my woodworking project, the absolute straightness if not critical. You can roll the rods on a flat counter top and determine if they are straight.
Question:	Can this be adjusted to only sense one side of the room from the ceiling
Answer:	Yes you can drill a 4mm hole through the wood and the berring block has and m4 thread in the flat part.
Question:	How bright is the bulb
Answer:	the mounting holes from center to center is 32 mm (right at an inch and a quarter)

Product description

Nortek: Supervised Passive Infrared Motion Detector Transmitter The Model DXS-54 Supervised Passive Infrared Motion Detector Transmitter is a battery powered passive infrared motion detector with a built-in transmitter designed for use with Linear’s DXS and DX format receivers. This transmitter can be used in a variety of motion detection applications. When the passive infrared sensor detects motion in its field of view, the transmitter sends a digitally coded wireless signal to its companion receiver. Alarm, supervisory, and low battery transmissions, Walk-test mode.

Product description

The SL-5407-BZ replacement motion sensor detects motion in a 180-Degree arc up to 70-Feet.

• Detection Range: Adjustable up to 70 ft. (21m), varies with surrounding temperature
• Sensing Angle: Up to 180-Degree
• Electrical Load: Up to 500 Watt (4.2A) Maximum Incandescent, up to 250 Watt maximum each lamp holder
• Power Requirements: 120 VAC, 60 Hz
• Operations: TEST, AUTO and MANUAL Mode, 1, 5, 10 Minutes Time Delay

User questions & answers

Question:	Does this come as pictured with the mounting stub or is it just the sensor? Thanks
Answer:	The white part is a shell for this sensor, and these are packing in one paper box. There is no other case / enclosure. Thanks
Question:	Can I use two of these in paralled to work one light? I want to mount them on the corners of a garage and turn on one central light
Answer:	No, you just need remove the cap Here is the picture http://s5.ecpperp.com/flyfun/data/upload/160624/FZ0057-05.jpg
Question:	Can you disable the dusk to dawn setting
Answer:	It is 2.54mm pitch on the 3 header pins. Thanks
Question:	does it come on during the day when detecting motion or just after dark
Answer:	It's configured with a photo resistor so it doesn't trigger during daylight. In my application I want mine to trigger anytime someone enters the bathroom, so I jumped it out of circuit. If you hold the board with the potentiometers up there is a row of resistors just below them. The one on the right being the photo transistor. The the body is clear, so it can detect light, that makes it easy to spot. It's placement on the opposite side of the board than that of the sensor, kind of makes it worthless.

Product features

Heath Zenith 180 Degree Motion Sensor Replacement, Bronze

The 180° Universal Replacement Sensor has a bronze weather resistant housing. It has an adjustable range up to 70 ft. with a 180° range of motion detection. It has a selectable light timer that can be set for 1, 5 or 10-minutes. Has a daytime shut off, sensitivity adjustment and automatic power outage reset.

Product description

A wireless PIR Motion Detector from 2GIG Technologies adds an additional layer of security to a home by alerting users when motion is detected. Upon detection the device can be set to alert via an audible chime and/or report detection to the central control panel. When integrated into a 2GIG Go!Control Z-Wave Control Panel, owner's can remotely view these alerts via a Smartphone, tablet or computer at any time and even receive a text alert when a PIR Motion Detector is triggered (service plan required for remote monitoring and management).



The Passive Infrared (PIR) Motion Detector is wireless and wall-mounted for quick setup with a maximum sensor detection range of up to 30 feet x 50 feet. To prevent false alerts caused by a family pet the PIR Detector is pet immune up to 55 lbs. The device has a wireless RF transmission range up to 350 feet in open air when used with the 2GIG Go!Control Panel and it is tamper protected.

• Dual element sensor with 30 ft. by 50 ft. range
• 33 or 55 lb. pet immune
• 90-degree look down, 110° spread
• Lithium battery with 5 years life
• 3 different mounting brackets

User questions & answers

Question:	What sort of warranty is provided? I purchased one a few years ago and now the motion alarm is tripping even though there is nothing to make it trip
Answer:	That is an interesting question that would require some deep thought. If you had 2 sensors hooked up to the same lamp and the triggered sensor turns on the light, the same electricity will travel back to the other sensor but should be ok whether it is triggered or not. There could be some circuitry however preventing you from hooking this up this way. You might consider using a 2,4, or 6 bulb fixture and spit the lights from 2 sensors. You have to continue walking toward the other sensor to trigger it for more illumination. I think it is worth testing . Good luck!
Question:	Is this standard z-wave? Will it work with SmartThings
Answer:	It's hard to determine unless you mount and test.
Question:	Is this 2gig-pir
Answer:	Yes the sensitivity can be adjusted and how long the light stays on can also be adjusted
Question:	will this work with the wink hub
Answer:	This is a switch not a lighting device.

Product description

A Versatile Motion Sensitive Light Switch That Can Save You Energy

Are you tired of people leaving the lights on when they leave the room, costing you money and burning out your light bulbs? Or are you looking for the comfort, safety and convenience of walking into a dark room and having the light switch on automatically? This motion sensitive light switch is perfect for your needs. It has an incredibly wide 180° field of view, so it can pick up motion as soon as you walk in the room – with no need to wave your hands around. Once you leave, it will automatically turn the light off after a pre-set amount of time.

Fully Adjustable With A Range Of Different Modes

This switch is incredibly versatile. You can adjust the sensitivity, so that the light will always stay on when the room is in use. You can also adjust the time delay to turn the light off from 5 minutes to 30 minutes of inactivity. Most importantly, you also have the choice of “Manual On” or “Automatic On”. Manual On is perfect for children’s bedrooms. The light will switch off automatically, but you turn it on with the switch. Automatic On is ideal for bathrooms, closets and other rarely used rooms.

Perfect For Any Room In Your Home

This switch is ideal for situations where your hands are full and you can’t turn on the light, like laundry rooms. It also prevents teenagers from forgetting to turn off the bathroom or basement light. It can even make stairways safer, by making sure that you never have to walk down in the dark. There’s dozens of uses, all over the home.

100% Money Back Guarantee

If you aren’t completely satisfied, for any reason at all, simply send it back to us within 30 days and we’ll give you a full refund – no questions asked.

Start Saving Energy and Make Life Easier – Pick Up This Motion Sensitive Light Switch Today

• NEUTRAL WIRE REQUIRED: This motion sensor requires connecting all 4 wires (including the NEUTRAL wire) in order to function properly. Lights will flash if not correctly connected. Please review your wiring setup prior to purchase. We recommend consulting with a licensed electrician prior to purchase to ensure proper installation and compatibility.
• SAVE ON ELECTRICITY BILLS: This dual purpose vacancy and occupancy wall switch sensor provides optimal management of lighting and a choice of either Manual-On (Vacancy Sensor) or Automatic-On (Occupancy Sensor) switching. These sensors are engineered to ensure that lights will turn ON manually or automatically and turn OFF automatically when motion is no longer detected within range. This saves energy, provides convenience and lowers electric bills.
• ADJUSTABLE SENSITIVITY WITH WIDE FIELD OF VIEW: The motion sensor covers 180°, so all motion is detected. There’s no need to wave your hands at the sensor. Sensitivity can be adjusted, so the lights won’t switch off at inconvenient times.
• 100% MONEY BACK GUARANTEE: We stand behind the quality and utility of this light switch. If you aren’t completely satisfied with it, for any reason at all, simply send it back to us for a full refund – no hassles, no delays and no questions asked.
• FULLY CERTIFIED AND COMPLIANT: UL Certified, FCC Listed and California Title 24 Compliant.

User questions & answers

Question:	Hello, does this work with LED lights
Answer:	It comes with the mounting stub as pictured. The mounting stub is the standard size for attaching to an electrical box (there are any number of options as to what size and style). I purchased this unit about a year ago and it has functioned flawlessly.
Question:	Will this work with fluorescent light fixtures
Answer:	My guess is you will burn them out. i tried this once with a water circulation pump (no light in the circuit) connected to a relay. A friend of mine had 3 of these in 3 different bathrooms in his house. the thought was as soon as someone walked into a bathroom, this device would activate a pump which would circulate hot water from the water tank to the fixtures (and hence the cold water in the line back to the tank for heating). We took precautions. first we made sure the power going to the 'hot' and neutral side of the sensors were from the same breaker (otherwise you could accidentally send 240 volts to the load if the sensors were on different sides of the line coming into your breaker panel). Second, we used a relay (mentioned earlier) as 'the load' because the draw (in amps) of the circulation pump was more than the sensor would allow as a pass though (you have to pay attention to the current these things will allow... watts, amps, miliamps - all need to know stuff! - we could have hooked it up directly, but it would have burned them out in short order, not to mention create a fire hazard). Finally, we ran all three of the load wires back to one junction box, tied them together with a wire nut (to complete the parallel connection you are talking about), and connected the load to the trigger side of the relay. we walked in each room and sure enough, the motion sensor engaged the relay, and the motor kicked on and the water circulated as designed. we thought we were home free. after about 2 months, we noticed one of the sensors was no longer activating the relay (and the pump did not run). we could eliminate the motor as it was completely separated from the electrical path. we discovered one of the motion sensors had burned out. replaced it, and all was well, and then a month later, a motion sensor from ANOTHER bathroom burned out. the relay hardly drew any power, so it couldn't be that. then we separated all of them and had three separate relays to engage the pump - never had another issue with burn-out. so what happened? we think if a person 'tripped' the motion sensor, it sent 110 volts to the load side of the other sensors (which were not activated by motion), and that 'back flow' of power messed up the electronics inside the sensors not in use. only explanation that made sense. so long story short, you could connect them in parallel, but i think they would burn out because of a 'back flow' between the devices. when we separated them with individual relays - no problems. e-circulation pump would have drawn more amps than the sensor allows to pass through we ranf the 'load' side of
Question:	anyone know how many amps this can handle
Answer:	yes
Question:	I want to install this in my foyer. Will this sense movement from second floor when coming the downstairs
Answer:	If your application requires it to work during the day just put electrical tape over the photo sensor and it works 24/7. I used sensor to activate a fountain pump 24/7

Product features

C1 Motion Sensor Light Switch (Single Pole)

Are you tired of people leaving the lights on when they leave the room, costing you money and burning out your light bulbs? Or are you looking for the comfort, safety and convenience of walking into a dark room and having the light switch on automatically? This motion sensitive light switch is perfect for your needs. It has an incredibly wide 180° field of view, so it can pick up motion as soon as you walk in the room – with no need to wave your hands around. Once you leave, it will automatically turn the light off after a pre-set amount of time.

Perfect For Any Room In Your Home

This switch is ideal for situations where your hands are full and you can’t turn on the light, like laundry rooms. It assists you when forgetting to turn off the bathroom or basement light. It can even make stairways safer, by making sure that you never have to walk down in the dark. There’re dozens of uses, all over the home or office.

Fully Adjustable With A Range Of Different Modes

This switch is incredibly versatile. You can adjust the sensitivity and level of natural light, so that the light will always stay on when the room is in use. You can also adjust the time delay to turn the light off at preset intervals of 15 seconds (Test), 1 minutes, 5 minutes, 15 minutes, 30 minutes of inactivity. Most importantly, you also have the choice of Vacancy Mode (Manually turn on the light) or Occupancy Mode (Automatic turn on the light at detection of motion). Vacancy Mode (Manual) is perfect for children’s bedrooms. The light will switch off automatically, but you turn it on with the switch. Occupancy Mode (Automatic) is ideal for bathrooms, closets and other rarely used rooms.

• 5000K & 130 LM/W - Hyperikon’s LED Highbay is a high output light fixture which produces a super bright lumen count of up to 39,000! This garage light will provide superior brightness to any indoor area with high ceilings like garages, warehouses, and workshops.
• 45,000 HOURS & ENERGY EFFICIENT- Hyperikon’s High Bay LED Lighting is the perfect fluorescent and halogen replacement, swapping 650W for 165W LED! In addition, this Linear LED Fixture has a lifetime rating of over 45,000 hours, reducing maintenance costs and lasting for years to come.
• PIR MOTION SENSOR INCLUDED - The motion sensor gives this linear high bay light a great versatility.With a detection range of up to 16ft and a beam angle of 110°, our LED outdoor light has a wide area coverage.Once installed, follow the manual guide to learn how to use the knobs and adjust the light's settings
• UL LISTED AND REBATE ELIGIBLE - Certified to deliver the quality, performance and savings. This product has been tested and listed by the Underwriters Laboratories, meaning it has met their nationally recognized safety requirements. This LED High Bay Light is also DLC 4.3 Qualified, allowing eligibility for state and nationwide rebate programs. Model Number: HyperLHB165-50, UL Number: E475117.
• 5 YEAR WARRANTY - You are always covered by our 5-year warranty when you purchase Hyperikon products.

Product features

HyperSelect LED High Bay Light Fixture - 165W, 2ft Linear

The compact, durable, and affordable HyperSelect LED High Bay Light Fixture offers superior performance and brightness at 21,450 lumens. The fixture features an included motion sensor that can detect movement from up to 16 ft. This LED ceiling lamp is easy to install as a direct replacement for existing fluorescent or halogen high bays. Replace 650W with 1650W for more modern, efficient, and safe lighting.

---

Hyperikon's High Bay LED’s are UL-listed and Rebate Eligible, to ensure quality and safety. Model Number: HyperLHB165-50, UL Number: E475117

---

Common Applications

High bay LED’s are ideal for any applications in indoor areas with high ceilings, such as:

• Warehouse lighting
• Gymnasiums and indoor sporting facilities
• Garage lights
• Overhead shop lights
• Other large area industrial spaces

Product description

Specification:



Color: Black

Material: Aluminum Alloy

Input Voltage: DC 12V

Rated Current: 3Amp

Stroke length = 500mm(20")

Retracted length = 605mm(23.8");

Extended Length= 1105mm(43.5")

Rated Load: 900N

Travel Speed: 10mm/s

Limit Switch: Built-in

Working Temperature: -20ºC to 65ºC

Protection Class: IP54

Duty Circle: 25%

Noise Level: <50dB



How To Install



1. Prepare to connect the two wires of the actuator to a 12 volt battery

2.Blue wire to the positive terminal and grey wire to negative terminal will make the actuator extend. To make it retract, just reverse the terminal connections.

3.To simplify the last step, you can prepare a reverse polarity relay or switch (not included) for the actuator. When you want the actuator to extend and retract, just press the switch

4. Your actuator will hold its position when the power is off. It will automatically stop when reaches the end.

5.The actuator has pre-installed inner limit switch, it cannot be adjustable.

6. It comes with mounting brackets.



How to protect your actuator:



1. Please use the 12V DC power adapter

2. Please do not exceed the rated load

3. All the actuators have duty cycle, they are unable to work all the time without stop. The duty cycle of this actuator is 20%. it means that your actuator needs 4 minutes to rest for every 1 minute of work. If the actuator keeps working for long time, the motor is easily burnt out.

4. Please be careful, the actuator not completely waterproof



Widly Use:



Furniture and home application

Hospitals and healthcare

Industrial and construction application

Agricultural machinery



Package Included:



1 X 20" Linear Actuator

2 X Mounting Bracket

1 X Screw Set

• ★ Specification: Stroke length = 500mm(20"); Retracted length = 605mm(23.8"); Extended Length= 1105mm(43.5“); Travel speed = 0.39 inches/sec (10 mm/s);Maximum current draw = 3Amps; Maximum Load = 225lbs(900N).
• ★ Material: High quality aluminum alloy material, sturdy enough and with fashion look, High performance motor ,Built-in high quality limit switch
• ★ Low noise: The low noise design, noise level below 50 dB
• ★ IP54 rated: (suitable for outdoor use). Commonly Used In Automotive, Medical Devices and Engineering Industry, massage sofa, recliner, TV lifter, lifting table, electric window opener etc.
• ★ Package Included: 1pc 12V 20 Inch Linear Actuator with 2pcs mounting brackets.

User questions & answers

Question:	What would I need to hook this up to a power plug in my house
Answer:	These are primarily used by vivant alarm co. If you purchased it through them lifetime. If you purchased from any other vendor 1 year. What usually goes is a resistor on the circuit board.
Question:	Can this be used with 24 volts
Answer:	No
Question:	what is the diameter of the outer tube housing
Answer:	Why yes it is!
Question:	What is the outside diameter of the tube? I need it to fit between two panels with a 35mm gap
Answer:	Sorry but it does not. This device operates on the 345mhz frequency and is only compatible with 2gig devices. Please note however, the 2gig panel has integrated zwave and can operate as a smart home controller with more options than the current wink hub available.

Product description

Save time, energy and money on your electric bills with this Dependable Direct Passive Infrared Mount Occupancy Sensor Switch. This mount occupancy sensor make your lights turn on and off when not in use and will serve as a replacement for the manual switches . It features a sensor that detects heat-emitting sources to automatically turn the lights on when the area is occupied.

• Ideal For High Ceilings - This occupancy sensor is designed to replace a standard light or fan switch. It is ideal for high mounted areas such as warehouses, manufacturing, and other high ceiling applications.
• Programmable - This UL Listed sensor features adjustable sensitivity controls, time delay and light level settings so you can customize it for your needs.
• Save Time and Energy - The sensor protects and extends lamp life while maximizing energy savings by turning the lights off when it detects no movements in a given duration of time.
• Passive Infrared Technology - This high bay occupancy sensor uses passive infrared (PIR) technology to detect movement in the surrounding space, and automatically turn the lights on and off based on motion in the area. It is a compact, white motion sensor that blends right into your ceiling.
• Adjustable Time Delay & Sensitivity - The time delay is adjustable from 15 seconds up to 30 minutes and provides a coverage range of up to 30 feet.

User questions & answers

Question:	what is the max wattage per unit
Answer:	Yes, I installed the motion sensor to control LED lights
Question:	fluorescent- where on the light fixture would it be installed ? On the ballast or the wiring that come out of the ballast
Answer:	Yes it will work with any type of bulbs.
Question:	I bought sensky motion activated led strip light kit (sold on amazon) but the sensky sensor is bad, i want replace sensor with this, work with this
Answer:	it is rated for 800W at 120V, so 6.7A
Question:	Can relay be wired for control of 0-10 dimming circuit (current sinking
Answer:	Installation diagram shows sensor range only below installation height, so it shouldn't.

Product features

D1 Ceiling Occupancy Motion Sensor - High Bay Fixture Mount 360 Degree

PASSIVE INFRARED TECHNOLOGY

This high bay occupancy sensor uses passive infrared (PIR) technology to detect movement in the surrounding space, and automatically turn the lights on and off based on motion in the area. It is a compact, white motion sensor that blends right into your ceiling.

SAVE TIME & ENERGY

Protects & extends lamp life while maximizing energy savings by turning the lights off when it detects no movements in a given duration of time.

IDEAL FOR HIGH CEILINGS

This occupancy sensor is designed to replace a standard light or fan switch. It is ideal for high mounted areas such as warehouses, manufacturing, and other high ceiling applications.

Motion Sensor Light Switch

Check out other Dependable Direct Products

Dependable Direct offers high quality, commercial grade products, please check out our other products in the store.

USB Ports and Duplex Tamper Resistant Receptacle

Check out other Dependable Direct Products

Dependable Direct offers high quality, commercial grade products, please check out our other products in the store.

GFCI Duplex Outlet Receptacle TR WR

Check out other Dependable Direct Products

Dependable Direct offers high quality, commercial grade products, please check out our other products in the store.

Various Outlet Wallplate

Check out other Dependable Direct Products

Dependable Direct offers high quality, commercial grade products, please check out our other products in the store.

Linkable 5.5Inch x 4FT LED Wraparound Flush Mount Ceiling Light

Check out other Dependable Direct Products

Dependable Direct offers high quality, commercial grade products, please check out our other products in the store.

Double Ring Dimmable LED Flush Mount Ceiling Light

Check out other Dependable Direct Products

Dependable Direct offers high quality, commercial grade products, please check out our other products in the store.

Dimmable LED Disk Light Flush Mount Ceiling Light

Check out other Dependable Direct Products

Dependable Direct offers high quality, commercial grade products, please check out our other products in the store.

Dimmable Retrofit LED Recessed Downlight

Check out other Dependable Direct Products

Dependable Direct offers high quality, commercial grade products, please check out our other products in the store.

• 130 LM/W - Hyperikon’s LED Highbay is a high output light fixture which produces a super bright lumen count of up to 39,000! This garage light will provide superior brightness to any indoor area with high ceilings like garages, warehouses, and workshops.
• 45,000 HOURS & ENERGY EFFICIENT- Hyperikon’s High Bay LED Lighting is the perfect fluorescent and halogen replacement, swapping 600W for 100W! In addition, this Linear LED Fixture has a lifetime rating of over 45,000 hours, reducing maintenance costs and lasting for years to come.
• PIR MOTION SENSOR INCLUDED - The motion sensor gives this linear high bay light a great versatility.With a detection range of up to 16ft and a beam angle of 110°, our LED outdoor light has a wide area coverage.Once installed, follow the manual guide to learn how to use the knobs and adjust the light's settings
• REBATE ELIGIBLE - This LED High Bay Light is DLC 4.3 Qualified, allowing eligibility for state and nationwide rebate programs. Model Number: HyperLHB100-50.
• 5 YEAR WARRANTY - You are always covered by our 5-year warranty when you purchase Hyperikon products.

Product features

HyperSelect LED High Bay Light Fixture - 100W, 2ft Linear

The compact, durable, and affordable HyperSelect LED High Bay Light Fixture offers superior performance and brightness at 13,000 lumens. The fixture features an included motion sensor that can detect movement from up to 16 ft. This LED ceiling lamp is easy to install as a direct replacement for existing fluorescent or halogen high bays. Replace 500W with 100W for more modern, efficient, and safe lighting. HyperSelect High Bay LED’s are Rebate Eligible, to ensure quality and safety.

Common Applications

High bay LED’s are ideal for any applications in indoor areas with high ceilings, such as:

• Warehouse lighting
• Gymnasiums and indoor sporting facilities
• Garage lights
• Overhead shop lights
• Other large area industrial spaces

• Motion Sensor Light Switch - The T01L Light will turn on automatically when you get within 10 feet and the light stay on for extra 20 seconds after you leave in Auto mode. Auto/On/Off 3 modes available for different occasions. Built-in Light Sensor allows you to choose whether to work only at NIGHT or both DAY and NIGHT.
• Longer & Brighter - 14-Inch Panel, 2 Watt equipped with 20 Super Bright LEDs. Give Out 180 Lumens of Soft White Light. Installation takes a few seconds with the provided Screws or 3M Sticker.
• Excellent Run Time - Powered by 3 pcs AA batteries (batteries not included). No Wiring Required! Use it 10 times a day, 3 AA batteries last up to 6 months! The T01L light can also be powered by 5V USB DC Plug (DC cable provided) to provide constant lighting.
• Adjustable Light Beam & Motion Sensor - Unique Design allows it to Swivel to adjust beams directions, and the motion sensor is also adjustable to modify sensitivity. This under cabinet led lights can be mounted in a horizontal position or in a vertical position.
• 100% Satisfaction Guarantee - Comes with 30 days Money Back Guarantee and 12-Months Hassle-free Replacement Warranty. The T01L might be the best Closet Light you could find, so order now and enjoy your Better Lifestyles!

Product features

SUPER BRIGHT & LONG LASTING LEDs

Provide Clean & Super Bright White Light 180 Lumen/by Battery or 260 Lumen/Hardwired, Unique Design Allows it to Swivel to Adjust Beams Directions. Never Hurt Your Eyes or Bother Others Around When its dark. The Motion Sensor is also Adjustable to Modify Sensitivity.

LONGER BATTERY LIFE

Use it 10 times a day, 3 AA batteries last up to 6 months! This light can also be hard-wired to an USB adapter (Wall Charger Not Included) to provide 260 Lumen of super bright motion activated light.

Closet

Two Power Modes：

1. Battery Power Mode: Powered by 3 pcs AA batteries (batteries not included). No Wiring Required! Use it 10 times a day, 3 AA batteries last up to 6 months!

2. Hard-wired Mode: Connect to a USB wall charger to provide Super Bright 260 Lumens of Motion Activated Light. (Wall charger NOT included)

Kitchen

Power Switch:

ON: Continuous ON

OFF: Shut OFF

AUTO: Motion Sensor Modes (two light sensor options see below).

Turn the Power Switch to “AUTO”, then choose one of the two sensor Modes via Sensor Modes Switch

Under Cabinet Lighting

Package Included:

1 x BLS Under Cabinet Light

1 x DC Cable

2 x 3M Adhesive Tapes

3 x Screws

1 x User Manual