11 best amir motion sensors

Product description

With AMIR Motion Sensor Lights, you can…

- Say good bye to bumping into stuff in the dark.

- Comfort kids who are afraid of the dark

- Cheaper to run than ceiling lights



AMIR Motion Sensor Lights act like little “guardians”, provide automated, hands-free way to protect your homes indoors and outdoors. Light up your bedroom, stairs, hallway, closet, or entryway to your home where the light switch is just too far from the door. Don't leave lights on needlessly running up the electric bill.



With easy installation,it mounts in seconds. No hammers, drills, or tools required. Simply use the double-sided adhesive pads or stick to any metal surface with the built-in magnet.



Note:



1. Please kindly check whether the batteries have been installed in the correct direction.

2. This light can only be turned on in darkness environment. The light won't turn on if the light sensor has been detected by the enough light.

3. If you use Alkaline battery first and then change to zinc-manganese dry battery, the lights might not work as the zinc-manganese dry battery is shorter than the Alkaline battery.

4. The sensor light might not work if you use the infrared heater in winter. The infrared will cause failure of the sensor. However, the light will get back to work in 30 minutes after turning off the heater.

5. Please clean the wall surface to keep it dry and clean, so that the double-sided adhesive pads can be pasted tightly.



Specifications:

1.5v, 0.3w

Sensitivity: 3 meter Distance

Sensor Range: 120 degrees

Operating temp: -20°C-40°C

LED Qty: 6 LED

Light color: Pure White

LED life: 50,000 hours or more

Mounting: Tape or Magnet

Product Diameter: 3.15 in

Thickness: 0.87 in

Package includes:



6 x Motion Sensor LED Night Light

6 x double-sided adhesive pads

1 x User Manual

• Super-bright LED Bulbs - Up to 20 Lumen output, 6 pcs super bright SMD 2835 LED; bright enough to make sure you never stumble in the dark
• PIR Motion & Light Sensor - Auto-on within 10 feet, auto-off after 15 seconds of no motion detected helps prolong battery life. It will turn on only when it is dark and when motion is detected
• Easy Installation - Simple to install, no hard-wiring. With adhesive pads and built-in magnet, you can stick on anywhere you like
• Battery Operated - Powered by 3PCS AAA batteries (not included) for coreless installation. To provide you with illumination in areas that have limited or no access to electricity
• Note: This light can only be turned on in darkness environment. It won't turn on if the light sensor has been detected by the enough light. And Please DO NOT install this light in high temperature place, otherwise, high temperatures will affect the adhesive strip, and then the light will slide easily!!

Product features

AMIR Motion Sensor Light

AMIR Motion Sensor Lights act like little 'guardians', provide automated, hands-free way to protect your homes indoors and outdoors. Light up your bedroom, stairs, hallway, closet, or entryway to your home where the light switch is just too far from the door. Don't leave lights on needlessly running up the electric bill.

Here are some notes for you when you use it :

Here are some notes for you when you use it :

- Please make sure that the anode and cathode of battery has been installed correctly.

- Please do not install 2 lights too close. One of them effected by the other may not work.

- If you use Alkaline battery first and then change to zinc-manganese dry battery, the lights might not work as the zinc-manganese dry battery is shorter than the Alkaline battery.

• BATTERY OPERATED - Powered by 3PCS AAA batteries (not included) for coreless installation. To provide you with illumination in areas that have limited or no access to electricity
• SUPER-BRIGHT LED BULBS - Up to 20 Lumen output, 6 pcs super bright SMD 2835 LED; bright enough to make sure you never stumble in the dark
• PIR MOTION & LIGHT SENSOR - Auto-on within 10 feet, auto-off after 15 seconds of no motion detected helps prolong battery life. It will turn on only when it is dark and when motion is detected
• EASY INSTALLATION - Simple to install, no hard-wiring. With double-sided adhesive pads and built-in magnet, you can stick on anywhere you like
• WARM PROMPT - This light can only be turned on in darkness environment. It won't turn on if the light sensor has been detected by the enough light. And Please DO NOT install this light in high temperature place, otherwise, high temperatures will affect the adhesive strip, and then the light will slide easily!!

User questions & answers

Question:	What's its detection range
Answer:	That is the solar part. On the back is the on, flash, off button and you can slip the stick to Pocatello in ground.
Question:	How many LED each light
Answer:	Dear sir or madam, no worry about that. these lights made of copper, they do not contain lead.
Question:	Batteries included
Answer:	The are! They survived a sever hail storm followed by a downpour with no damage I believe you would really like these.
Question:	Are they rechargeable lights
Answer:	The stake is optional, you would just have to make a bracket for the solar panel

Product features

AMIR Motion Sensor Light

With AMIR Motion Sensor Lights, you can…

- Say good bye to bumping into stuff in the dark.

- Comfort kids who are afraid of the dark

- Cheaper to run than ceiling lights

AMIR Motion Sensor Lights act like little “guardians”, provide automated, hands-free way to protect your homes indoors and outdoors. Light up your bedroom, stairs, hallway, closet, or entryway to your home where the light switch is just too far from the door. Don't leave lights on needlessly running up the electric bill.

Automatic Sensor

- Only turn on in the dark and when motion is detected.

- Auto-on within 10 feet, auto-off after about 15 seconds of no motion detected.

Enough Light

- Provide enough light to make sure you never stumble in the dark.

- Sensitivity : 10 feet Distance.

- Sensor Range: 120 degrees.

Easy Installation

With adhesive pads and built-in magnet, you can stick on anywhere you like.

Here are some notes for you when you use it :

- Please make sure that the anode and cathode of battery has been installed correctly.

- This light can only be turned on in darkness environment. The light won't turn on if the light sensor has been detected by the enough light.

- If you use Alkaline battery first and then change to zinc-manganese dry battery, the lights might not work as the zinc-manganese dry battery is shorter than the Alkaline battery.

- Please clean the wall surface to keep it dry and clean, so that the double-sided adhesive pads can be pasted tightly.

Product description

With AMIR Motion Sensor Lights, you can…

- Say good bye to bumping into stuff in the dark.

- Comfort kids who are afraid of the dark

- Cheaper to run than ceiling lights

AMIR Motion Sensor Lights act like little “guardians”, provide automated, hands-free way to protect your homes indoors and outdoors. Light up your bedroom, stairs, hallway, closet, or entryway to your home where the light switch is just too far from the door. Don't leave lights on needlessly running up the electric bill.

With easy installation, it mounts in seconds. No hammers, drills, or tools required. Simply use the double-sided adhesive pads or stick to any metal surface with the built-in magnet.

Note:

1. Please kindly check whether the batteries have been installed in the correct direction.

2. This light can only be turned on in darkness environment. The light won't turn on if the light sensor has been detected by the enough light.

3. If you use Alkaline battery first and then change to zinc-manganese dry battery, the lights might not work as the zinc-manganese dry battery is shorter than the Alkaline battery.

4. The sensor light might not work if you use the infrared heater in winter. The infrared will cause failure of the sensor. However, the light will get back to work in 30 minutes after turning off the heater.

5. Please clean the wall surface to keep it dry and clean, so that the double-sided adhesive pads can be pasted tightly.

Specifications:

1.5v, 0.3w

Sensitivity: 3 meter Distance

Sensor Range: 120 degrees

Operating temp: -20°C-40°C

LED Qty: 6 LED

Light color: Pure White

LED life: 50,000 hours or more

Mounting: Tape or Magnet

Product Diameter: 3.15 in

Thickness: 0.87 in

Package includes:

3 x Motion Sensor LED Night Light

3 x Double-sided adhesive pads

1 x User Manual

• Battery Operated - Powered by 3PCS AAA batteries (not included) for coreless installation. To provide you with illumination in areas that have limited or no access to electricity
• Super-bright LED Bulbs - Up to 20 Lumen output, 6 pcs super bright SMD 2835 LED; bright enough to make sure you never stumble in the dark
• PIR Motion & Light Sensor - Auto-on within 10 feet, auto-off after 15 seconds of no motion detected helps prolong battery life. It will turn on only when it is dark and when motion is detected
• Easy Installation - Simple to install, no hard-wiring. With double-sided adhesive pads and built-in magnet, you can stick on anywhere you like
• Note: This light can only be turned on in darkness environment. It won't turn on if the light sensor has been detected by the enough light. And Please DO NOT install this light in high temperature place, otherwise, high temperatures will affect the adhesive strip, and then the light will slide easily!!

Product features

Automatic Sensor

- Only turn on in the dark and when motion is detected.

- Auto-on within 10 feet, auto-off after about 15 seconds of no motion detected.

Enough Light

- Provide enough light to make sure you never stumble in the dark.

- Sensitivity : 10 feet Distance.

- Sensor Range: 120 degrees.

Battery Operated

- Need 3 AAA Batteries.

- Tip: Twist to remove the cover.

Product description

AMIR Motion Sensor Light and Salt Lamp Night Light Bundle

• Super-bright LED Bulbs - Up to 20 Lumen output, 6 pcs super bright SMD 2835 LED; bright enough to make sure you never stumble in the dark
• PIR Motion & Light Sensor - Auto-on within 10 feet, auto-off after 15 seconds of no motion detected helps prolong battery life. It will turn on only when it is dark and when motion is detected
• 【SPECIAL MATERIAL】: Hand selected from the Himalayan Mountains, each of the salt light is made from highest quality-AA level salt crystals with the best clarity, and crafted to allow the insertion of a UL approved plug, serves as a stylish decoration lamp in bedroom, living room, kitchen, coffee shop, book store, bar, and so on. What a perfect gift choice for you!
• 【AIR PURIFIER】: Natural Himalayan salt lamp works as “Natural negative ion generator”. When heated, it emits negative ions that fight against electromagnetic radiation, fights fatigue and sluggishness; improve health ability; increase the flow of oxygen to the brain; sleep better & wake refreshed; soothe allergies. It does have a profound effect on your health.

Product description

AMIR Motion Sensor Lights | (2020 New) AMIR Motion Sensor Light (3 Modes )

• Includes: AMIR Motion Sensor Lights + (2020 New) AMIR Motion Sensor Light (3 Modes )
• Multiple Occasions: Broadly applied to multiple occasions include hallway, bathroom, kitchen, bedroom, living room, closet, wardrobe, cabinet, basement, stairs, corridor, etc.

Product description

AMIR (Upgraded Version) Motion Sensor Lights | AMIR Upgraded Night Light Projector, 2 in 1 Star Projector/Ocean Wave Projector

• Includes: Motion Sensor Lights + Night Light Projector

Product description

AMIR (Upgraded Version) Motion Sensor Light (White - Pack of 6) | (Upgraded Version) Motion Sensor Lights (White - Pack of 3)

• Battery Operated
• Automatic Sensor
• Easy Installation

• 3-MODE SMART ILLUMINATION - The LED night light is designed with 3 working mode (ON/ OFF/ AUTO). When it’s switched to auto mode, the light will automatically light up when motion is detected, auto-off after 20 seconds of no motion detected. Besides, switch it to ON for normally on mode when consistent lighting is required. What’s more, switch it off to save power.
• RECHARGEABLE BATTERY - This AMIR Motion Sensor LED Light is Powered by Built-in rechargeable battery, you can charge it via a USB cable, or USB port. It can work up to 3.5 hours in ON mode after charging about 2 hours.
• BRIGHTNESS ADJUSTABLE - The motion sensor light consists of 6 high-brightness LED bulbs, with 2 different brightness levels (High/ Low), you can choose the desired one by switching the button.
• 2 EASY INSTALLATION MODES - The stair light is easy to install. It could directly attached to any ironwork surface with the built-in magnet. Or stick the double-sided tape on the iron sheet, and then stick the iron sheet on any surface, no any tools are needed, safe and convenient to use.
• WIDELY APPLICATION: Sleek and stylish appearance make this step light with motion sensor an ideal for outside, indoor or home lighting. This LED Light works great for bedroom, hallway, washroom, kitchen, balcony, corridor, stairs, dark closets, backyard, cabinets, etc.

User questions & answers

Question:	what is the sensor angle
Answer:	I had the same problem.
Question:	How many brightness levels do they have
Answer:	Auto-on within 10 feet, auto-off after 12-17 seconds
Question:	how many modes do they have
Answer:	It is 10 lights versus 6 lights. These work amazingly in our closets and activate as soon as we open the door. The only drawback is the adhesive that attaches the light to a surface does not last. My solution was to get a strip of velcro and replace the current magnetic strip on these lights. Hope this helps
Question:	Do you take these off of the wall to charge with the USB
Answer:	yes, this light also can turn on by dog motion

• Automatic Sensor: Auto-on within 10 feet, auto-off after 12-17 seconds of no motion detected helps prolong battery life. It will turn on only when it is dark and when motion is detected.
• 10 LED & Super-Bright: With 10 LED in each light, AMIR motion sensor lights provides enough light to make sure you never stumble in the dark.
• Simple Installation: An adhesive strip with magnetic fields is easily attached to and detachable from the lamp body. No tools, screws or nuts are required.10 pcs bright white LED, energy-saving and environment friendly.
• Battery Operated: This AMIR Motion Sensor LED Light is Powered by 4PCS AAA batteries (not included). AMIR smart sensor chip with passive infrared technology, reliable performance and high sensitivity, accurately detect your movement.
• Note: This light can only be turned on in darkness environment. It won't turn on if the light sensor has been detected by the enough light. And Please DO NOT install this light in high temperature place, otherwise, high temperatures will affect the adhesive strip, and then the light will slide easily!!

User questions & answers

Question:	How long are the lights
Answer:	I do not think so.
Question:	I just got these and they say the need to be 3m (9 feet) apart. Is that correct
Answer:	I’ve had no problems down to 25
Question:	What is the Lumen rating
Answer:	I would not put them in a back yard unless you can put them up high on a building or pole. The yard will be well lit but no one will want to be out there because they will be blinded by them. I dont see any evidence for them coming in white but you could lightly sand the powder coating and paint them yourself I would think.
Question:	Are you able to manually switch off the lights
Answer:	Dear Customer, Thank you very much for your attention to our LED wall pack. Because this product is in short supply,so I set up its purchase quantity. But we've solved this problem as quickly as possible. And we also have another led wall pack. For example,120W warm white led wall pack https://www.amazon.com/dp/B074M7FB4R 60W white led wall pack,60W warm white led wall pack light fixture. https://www.amazon.com/dp/B074M7H43G https://www.amazon.com/dp/B074M7P85Z Hope can solve your problem. If you have any questions, Pls contact us,we will responde asap. Sincerely, Targetlighting Customer Service

Product features

AMIR Motion Sensing Closet Lights, DIY Stick-on Anywhere Portable 10-LED Wireless Cabinet Night/ Stairs/ Step Light Bar with Magnetic Strip

Specifications:

1. Sensitivity> 3 Meter Distance

2. Sensor Range: 120 Degrees

3. LED Qty: 10 LED

4. Light Color: Pure White

5. LED Life: 50,000 Hours Or More

6. Size: 7.4 x 1.2 in (L x W)

7. Material: Aluminum + ABS

8. Light Weight: 114g / 4.0oz

Note:

●Please kindly check whether the batteries have been installed in the correct direction.

●This light can only be turned on in darkness environment. The light won't turn on if the light sensor has been detected by the enough light.

●Battery Not Included

Package Contents:

6 x 10 LED IR Sensor Closet Light

1 x User Manual

GCID: AMIR

Product description

AMIR (Upgraded Version) Motion Sensor Lights | (Upgraded Version) Fairy String Lights

• Includes: Motion Sensor Lights + Fairy String Lights

• ✅BATTERY OPERATED: This Motion Sensing Closet Light is powered by 4PCS AAA batteries (not included). Smart sensor chip with passive infrared technology, reliable performance and high sensitivity, accurately detect your movement.
• ✅AUTOMATIC SENSOR: Auto-on within 10 feet, auto-off after 12-17 seconds of no motion detected helps prolong battery life. It will turn on only when it is dark and when motion is detected.
• ✅IDEAL LIGHTING: With 10 LED in each light, this motion sensor lights provides enough light to make sure you never stumble in the dark. Fantastic energy saving and environmentally friendly ensures an extra-long life for your light.
• ✅SIMPLE INSTALLATION: An adhesive strip with magnetic fields is easily attached to and detachable from the lamp body. No tools, screws or nuts are required.
• ✅WARM PROMPT: ▲This light can only be turned on in darkness environment. It won't turn on if the light sensor has been detected by the enough light. ▲Please DO NOT install this light in high temperature place, otherwise, high temperatures will affect the adhesive strip, and then the light will slide easily!!

User questions & answers

Question:	If we place these lights under our dresser (in our closet) do you think they would detect the motion or would our feet need to go right by them
Answer:	7.5 x 1.2 in (L x W)
Question:	What's the material of this light
Answer:	NO I have mine under cabinets over counter and only 2-3 ft. apart. Have 4 sensor above an 8-9ft. counter with an "L" shape. They work fine going on by motion in area under sensor. I believe the 3 meter suggested is for those that could be affected by the light nearest one emits if they face each other.
Question:	What's its detection range
Answer:	The only info provided is: work voltage:DC3-V; static features: load power: 600MW; induction distance: 3-5M; induction angle:
Question:	How long do the batteries last if used in something like a closet where it might be open once a day
Answer:	Thanks for your question.My pleasure let you know you can removing the batteries...it is very simple.