13 best workbench for shop

Product description

Remember when you had a reliable and attractive storage solution? The WEN Work Bench provides organization, power, and light. What more could you want? This spacious works station measures in at 62 inches tall with a 25 by 48-inch footprint. The included pegboard combined with the two 20 by 18-inch drawers make for an easy storage and organization solution for your tools and materials. The 47 by 23-inch tabletop supports up to 220 pounds of weight, providing you a reliable work surface for all your various needs. The overhead fluorescent lightbulb illuminates your workspace while the three side-mounted 120V 13-amp outlets provide accessible power whenever it’s needed. The heavy duty bottom shelf supports an additional 200 pounds of weight, giving you extra storage right below your workspace. And because its a WEN product, your work station comes backed by a two-year warranty, a nationwide network of skilled service technicians. Remember when you got organized? Remember WEN.

• Perfect for woodworkers, mechanics, or anyone else in need of reliable organization
• Features two drawers, upper and lower storage shelves, and a pegboard for easy organization
• Enamel-coated table top provides a spacious non-marring 220-pound capacity work surface
• Includes three built-in 13-amp power outlets and an overhead fluorescent light
• Measures in at 62 inches tall with a 25 by 48-inch footprint

User questions & answers

Question:	Anyone else have a drawer fall out and not go back in
Answer:	I've been covering kitchen counters with contact paper for years. It's cheap and make a fast, big difference in the looks of the kitchen (and bathroom formica counters). It comes off easily if you use a hair dryer to warm up the stuff (i.e. blow it back and forth along the top of the paper). It'll come up. I'm assuming that you're covering old formica counter-tops, right? If there's any sticky residue after removing the contact paper, use Soft-Scrub with water and a scrubby-sponge to get off the residue. If Soft-Scrub doesn't work --it should -- but if it doesn't, use Goo-Gone -- which is, btw, one of mankind's greatest inventions for removing all kinds of gunk. Contact paper is great for a quick cheap make-over. With reasonable care, it'll last a long time, but if you use it on the kitchen counter, you MUST use a cutting board when slicing stuff. Oh, and when putting it down, make sure surface you're putting it down on is bone-dry, or it won't stick. For the inevitable air-bubbles that show after you first put it down, stick a pin (straight pin, safety pin, whatever) in the air-bubble, and gently press the contact paper down, squeezing out the air. Take your time, be patient. Figure on spending a couple of hours doing the job, depending on size of the kitchen. Oh, and don't butt the seams. Instead, overlay by about 1/8th of an inch. Contrary to other opinions, it does NOT get nasty and dingy with use, assuming that you are reasonably tidy and prompt about wiping up spills.
Question:	What size is the holes on the peg board
Answer:	3M adhesive spray. Measure. Cut. Enjoy
Question:	Measurements for workplace of bench? Top of bench. I would like to put a wood top on
Answer:	what is your product?
Question:	Missing the right side railing for the drawer. Can you send that piece
Answer:	No worries ''Its good. contact paper will stay in place very well.I hope this helps.

Product features

WEN WB4723 48-Inch Workbench with Power Outlets and Light

Remember when you had a reliable and attractive storage solution? The WEN Work Bench provides organization, power, and light. What more could you want? This spacious works station measures in at 62 inches tall with a 25 by 48-inch footprint. The included pegboard combined with the two 20 by 18-inch drawers make for an easy storage and organization solution for your tools and materials. The 47 by 23-inch tabletop supports up to 220 pounds of weight, providing you a reliable work surface for all your various needs. The overhead fluorescent lightbulb illuminates your workspace while the three side-mounted 120V 13-amp outlets provide accessible power whenever it's needed. The heavy duty bottom shelf supports an additional 200 pounds of weight, giving you extra storage right below your workspace. Remember when you got organized? Remember WEN.

Product description

The Hopkins 90164 2x4basics Workbench and Shelving Storage System offers an easy fix to custom shelving. All the hardware is included, just add the size lumber you want (lumber not included). Simple assembly with only a powered screwdriver and a saw, no miter or angle cuts necessary. Ideal for the garage and shed, the Shelf Links are durable and sturdy giving you the ability to easily organize your items onto storage shelving.

Create a work and storage space that truly fits your needs with the 2x4basics Workbench Assembly Kit. This innovative, do-it-yourself system lets you easily assemble a custom workbench in less than an hour. All you need is some plywood and 2x4s and you'll have a work bench that will meet all your project and storage requirements.

Use the included bonus ShelfLinks Kit to add shelving to the top or sides of your workbench. View larger.

2x4basics Workbench Assembly Kit At a Glance Helps you build a customized workbench with a height of 36 inches Assembles in less than one hour Each shelf holds up to 1,000 pounds (400 kilograms) Requires only straight, 90-degree cuts Lifetime warranty

Completely Customizable, Easy-to-Assemble Workbench System

This do-it-yourself system lets you create a bench that's the exact size you want--up to 8 by 4 feet--by just adding lumber (not included). Assembly is incredibly easy, thanks to the included, easy-to-follow instructions and cut lists. All you need is a powered screwdriver and a saw--no other tools are necessary. For added convenience, only straight, 90-degree cuts are required--no miters or angles--and all the hardware you'll need is included in the kit. When assembly is completed, the work surface height will measure approximately 36 inches (90 centimeters).

Advanced Engineering Meets Strong, Durable Construction

Sturdy 2x4 framing and advanced engineering make this kit stronger and more stable than most other workbench solutions. In fact, each shelf will hold up to 1,000 pounds (400 kilograms). An added bonus, the materials are made of heavy-gauge resins and are impact- and solvent-resistant for long-term durability.

Versatile Design for Potting Benches, Custom Shelving, and Storage Options

With the Workbench Assembly Kit, you are no longer limited to a standard-sized potting bench--you can make a unit as small as 2 feet by 2 feet to use as a plant stand.

In addition, you can use the included bonus 2x4basics ShelfLinks Kit to add shelving to the top or sides of your custom workbench (additional ShelfLinks kits sold separately). You can build custom workbench and storage solutions for your dorm room, garage, basement, shed, or home. Custom shelving will also add valuable storage space that fits your project requirements.

What's in the Box

Four workbench legs, six ShelfLinks, assembly instructions, hardware, and warranty information.

Customize a work bench for any jobsite. View larger.

Each shelf holds up to 1,000 pounds. View larger.

Solvent resistant for long-term durability. View larger.

Expand your shelving and storage with six included ShelfLinks. View larger.

From the Manufacturer

This do-it-yourself system lets you create a bench that's the exact size you want--up to 8 feet by 4 feet--by just adding lumber (lumber not included). Assembly is incredibly easy, thanks to the included, easy-to-follow instructions and cut lists. All you need is a powered screwdriver and a saw--no other tools are necessary. For added convenience, only straight, 90-degree cuts are required--no miters or angles--and all the hardware you'll need is included in the kit. When assembly is completed, the work surface height will measure approximately 36 inches (90 centimeters). Sturdy 2 by 4 framing and advanced engineering make this kit stronger and more stable than most other workbench solutions. Each shelf will hold up to 1,000 pounds (400 kilograms). An added bonus, the materials are made of heavy-gauge resins and are impact- and solvent-resistant for long-term durability.

• Lumber not included with each kit (Shelves not included)
• Includes 4 workbench legs, 6 shelf links
• Brackets made of heavy gauge structural resin. Workbench Legs to make a workbench in any length or width up to 8 feet by 4 feet (2.4m x 1.2m)
• Customizable workbench and shelving
• Only straight 90 degree cuts, no miter or angle cuts necessary

User questions & answers

Question:	I see in the instructions that they state to put a piece diagonally to support the work top. Was there a place in the leg to attach this piece
Answer:	Yes, the upper leg support accommodates the (3) pieces of wood . The left & right sides of the wood are screwed into the leg support and the diagonally placed 2 x 4 is just laid diagonally across (sits on the upper leg bracket).
Question:	Is there anyway to attach caster wheels to make this easier to move
Answer:	YES! In fact it is quite easy to do , "Adding Castors/Wheels", to this workbench. As sturdy as this bench is once built it is easy to flip on it's side or back. And in that position simply attach your wheels. Just make sure you purchase GOOD wheels! And with a good mounting system. I at first tried to save a buck and bought some really cheap wheels from Amazon. Thought the wheels were rated at 500Lbs. That must have been a one time use rating! I then found a deal on Amazon for "Locking, Two inch dia., Polypropylene wheels with metal frames", Rated for 1000 Lbs. and they worked great. "STAY away from any plastic wheels regardless of the ratings!" The catch is the mounting system for the wheels. Most either have four holes you can place screws into OR a single steel 'Round", post with a metal "O-ring" to lock it in place. The latter you can order a larger plate that will attach to the bottom of the bench that the post slides up into. These worked for me. The one's with the four screws? Even with longer screws than recommended, -"4 x #8, 3-1/2" inch long, metal deck screws" they failed repeatedly. The bench weighs allot by itself and the four screws literally tore though the bottom of the bench! The wheels with a 3/8" inch metal center post worked with the mounting plates I made from heavy steel angle, "L-Brackets from the hardware store", with the 3/8" inch hole that I drilled in them for the post. With four 1" screws into the bottom but also two into the side. So that they were held both vertically and horizontally. Good luck!
Question:	Are the shelf supports included with this kit the same size as the 90124 Shelf Link units ( which accept 4- 2x4 in width) sold separately? From the pictures it looks like the ones with this bench kit are using 3 - 2x4, or one narrower
Answer:	I ordered the bench kit (90164) and the shelf link kit (90124). I did not use the shelf kit supplied with the bench kit on the bench itself. I combined them with the shelf link kit to make more shelves. They are exactly the same parts. I hope this helps.
Question:	Can someone give me a general estimated idea of the cost to assemble this assuming a table top size of around 5'x2' or
Answer:	I used sanded 3/4” sheets of plywood with a double layer on top plus all the 2x4’s and upgraded hardware. I spent an additional $450 to build mine.

Product features

Customizable Diy Storage, Organization And Outdoor Furniture

Our 2x4 Basics brackets have been designed to make garage organization and outdoor furniture projects as simple as possible. Only 90° cuts are required, no miters or angles, and projects can be built to any length up to eight feet. To simplify the process even more, only 2x4 lumber is needed for most projects.

Garage Organization

Outdoor Furniture

Outdoor Storage

Product description

Meet your new favorite workhorse, the Pegasus. This multi-function work table and sawhorse with quick clamps and holding pegs can support up to 300 lbs as a table, and up to 1,000 lbs as a sawhorse! The legs lock into place and are made of tough molded ABS with steel supports, and the non-slip feet stay in place on both grass and pavement. Yet the Pegasus itself is only 25 lbs, so you can fold it up and carry it anywhere, or keep it in the back of the truck. The integrated clamping system exerts up to 300 lbs of force to keep your project firmly in place, and has a max clamping width of 18 ¼”. And the clamp dog pegs allow you to secure round and oddly shaped materials. This table is 31” x 25” and is a standard 32” high, so it can be linked up with our other Worx tables, and other Pegasuses, to make a longer, fully-functional work table. (Link locks are included.) And the folding tray at the base is designed to hold tools, power strips, or anything you need on the job. The Pegasus is tough and solid enough to be a permanent work table or sawhorse but built to be portable, so you can take it from job to job, or from the basement to the garage without a problem. And it folds down to a depth of only 5”, so it’s easy to store when you’re not going to be using it for a while.

• [WORKTABLE & SAWHORSE] Holds up to 300 lbs. as a work table, supports 1,000 lbs. as a sawhorse. And it’s easy to transition between the two
• [CUSTOM CLAMPS] Two quick clamps are integrated and stay attached even when you fold the table into a sawhorse. Because they’re designed specifically for the Pegasus, they’ll be stronger and last longer
• [LIGHT AND STURDY] It’s only 25 lbs., and its foldable design makes it easy to move and store
• [CONNECT MULTIPLE TABLES] Create a whole work counter when you link 3 or more Pegasus’ together. Whether your worksite or workshop is spacious or tight, this building solution expands or contracts to fit your needs
• [DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last
• [STORAGE SHELF] On the bottom of the work Pegasus we’ve made a place to hold a power strip or supplies. Perfect extra shelf or storage for your workspace
• [BUILT TO LAST] Made out of a dependable, molded ABS with steel supports and fittings. This table will be with you for the long haul

User questions & answers

Question:	can i use this worx Pegasus for 12" miter saw stand
Answer:	Yes. Use the dogs and clamps to hold it in the center. You might want to put small sand bags on the legs to minimize shake creep
Question:	How wide can the clamps go? What is the widest I could clamp
Answer:	Thank you for your inquiry. The max clamping width is 18 inches.
Question:	Would you consider this table to be sturdy? And are the clamps good quality
Answer:	This a very sturdy table! I use it to put my radial arm on! The clamps are the same as on my Worx Sawhorses (which I also highly recommend). I use ONE to clamp my lawnmower blade when I use my angle grinder to sharpen it and it holds it VERY firmly! I would recommend getting the saw horses also as they are the same height and help support bigger pieces. I highly recommend both of them. Enjoy!
Question:	Is this the same Pegasus table for sell at the big box store for
Answer:	Yes, this would be the same unit that is sold in the local retail stores however, the price will vary per location.

Product features

Integrated Clamping System

Even though they’re removable, the clamps are designed for the Pegasus, and are optimized to give you the power and support you need.

Adaptability

You can build yourself an entire workbench by attaching another Pegasus or other Worx tables like the Sidekick or Clamping Sawhorse. All 3 are the same height and use the same joiners.

Foldable for Easy Transport

It’s only 30 lbs and fits right under your arm, so you can throw it in the back of the truck and take it to the job site, or from the basement to the backyard.

2 Bar Clamps and 4 Clamp Dogs

The bar clamps exert 300 lbs of force to keep almost any project firmly in place, and the clamp dogs are designed to hold circular or oddly shaped pieces. Pegasus can hold most projects as a result.

Built-In Measuring Guides

Never worry about misplacing the tape measure or a yardstick. This handy measuring guide is indispensable.

Collapsible and Lightweight

Pegasus folds easily and quickly into a form that’s made to be carried. And 30 lbs is light for a sawhorse. If you work in a lot of places, Pegasus is the table and sawhorse for you.

High Load Capacity

As a worktable, Pegasus can support up to 300 lbs, but folded down into a sawhorse, it can hold up to 1000 lbs. It may be light, but it’s engineered to be sturdy.

Product description

For the ultimate workbench, this Workbench Leg System features square column steel legs with adjustable foot pads and rectangular steel cross braces for unparalleled strength and stability. Assembly is fast and simple with bolt-together construction. Braces are recessed for adding a 3/4-Inch plywood shelf. Overall size without top is 32-Inch H by 56-Inch W by 28-Inch D. Tabletop and shelf not included.

• Item may ship in more than one box and may arrive separately
• 32-Inch H by 56-Inch W by 28-Inch D
• Recessed braces for shelf
• Includes legs, braces, hardware and adjustable feet only
• Table top and shelf are not included
• Powder coated paint

User questions & answers

Question:	What are the inner dimensions or inner shelf height? If I have an old vanity 28" H x 24"D would it fit
Answer:	If your surface is a typical "orange peel" texture then yes. It would work very well and cover up the texture. If you would like to send us an image via Amazon or ezfauxdecorataoldotcom of your surface we can best assist you.
Question:	Looks pretty good on a mobile screen, but why does it cost so much
Answer:	Yeah i did it looks great!
Question:	How big are the square pads that the table top sits on
Answer:	when you say wall damage, i assume when you remove it.it depends on the material of the wall (sheet rock, mdf board, concrete, etc.), and what's already on the wall. if the wall has been painted, there's a good chance of not having a wall damage when removed. if the wall has wallpaper, the wallpaper might come-off when you remove this film.try it in a small/hidden portion of the wall as a test.
Question:	so it's a table without a top ? so it includes 4 legs and a bottom shelf only ? no top
Answer:	I've only used it on Formica countertops but it peels off without any damage or sticky residue.

Product features

Shop Fox D2910 Workbench Leg System

For the ultimate workbench, this Workbench Leg System features square column steel legs with rectangular steel cross braces for unparalleled strength and stability. The cross braces have recessed edges for adding a (make-it-yourself) 3/4-inch plywood shelf, for a great addition to keep your tools out of the way when not in use.

Easy Assembly

The D2910 assembly is fast and simple with bolt-together construction and requires very little time.

Robust Construction

One of, if not the, strongest workbench leg systems available, especially when paired with a butcher block table top (not included). Wide rubberized foot pads are adjustable for table leveling and provide stability and a bit of vibration dampening when using powered tools on the surface.

Heavy Duty Construction

The D2910 features solid construction and provides plenty of strength and stability for a wide variety of uses.

Large Capacity

Evenly distributed, each leg of this workbench can bear a 1000 lb. load.

Product description

ADJUSTABLE DESIGN

LED Head can be adjusted easily for you to angle the way you desire, lighting your garage without

blind spot, say goodbye to darkness.



SUPER BRIGHT

10000 lumen output, 6500K daylight, CRI>80, 85% energy saving.



WIDE APPLICATIONS

Great for garage, basement, driveway, warehouse, barn, office, supermarket, restaurant, hotel,

workshop etc.



EASY INSTALLATION

No tools required, no wiring and professional electricians are needed. Works great in a standard

light socket E26/E27. Installation is as easy as screwing in a light bulb.



SPECIFICATION:

Wattage: 100W

Brightness: 10000LM

Interface Standard: E26/ E27 Socket

Input Voltage: AC85~265V

Light color: Daylight

Suitable for: Indoor Lighting

Color Rendering Index (CRI) > 80

Average lifespan : 50,000 Hours

Material: High quality plastic



Note:

1.This 5 leaf garage light is not waterproof. Ideal for both indoor and protected outdoor fixtures.

2.This product contains high intensity LED devices, do not stare at the light beam at close range.

• 💡【Illuminator 360° Garage Light & Downward Center Panel】Garage Light has five deforable LED paddles and a downward center panel light, it’s the equivalent of have 6 spotlights from one socket. Each leaf can be adjusted up to 90°, the LED light fixtures produce a 360° full wide illuminated field. 5+1 panel LED garage light is a nice replacement for ordinary light bulb that uses a E26/E27 ceiling socket.
• 💡【Super Bright LED Garage Light & 85% Energy saving】 With 135Pcs high-end LEDs, CRI 80+, 10000lm 6500k daylight, gives you no glare and dim lighting experience but 85% energy saving for your garage. High light efficiency, low power, maximum energy savings, and reduced billing. UPGRADE 5 Leaf Garage Light is the closest light to sunlight inside your home you can get!
• 🌟【Durable LED Light Beads & 50,000H Longlife 】Deformable garage ceiling light made of high-quality ABS and lamp Beads. LED Garage Light has good heat dissipation performance, and it is strong and durable. Equipped with SMD 2835 LED chips, bigger emitting area , efficient, ensure the foldable led garage lights last up to 50,000 hours! Mind: When the 100W garage lights are working, please DO NOT touch panels by hands directly, the panels are dissipating heat.
• 🌟【Easy Installation Like Bulbs 】The installation method of the transformable Garage Ceiling Light is very convenient, sporting an E27/E26 ceiling socket, you will not need any tools, wiring or even hiring expert electricians. This is very convenient and can save you time. Just screw the garage light into the ordinary lamp holder, the garage work light is brighter than the bulb.
• 🔔【What You Get】 2 * LED Garage Light, 1* User Manual, 2-year service extended after purchase. Super bright lighting tool for garage, warehouse, workshop, basement, laundry room, shed, attic, auto shops, etc. Buy with confidence! If there is any quality problems with the garage light, please let us know via Amazon.
• 🔔【High Quality & Light Weight】Different from classic garage lights, this garage light is made of high-quality plastic materials. Compared with classic garage lights, this garage light has the advantage of being lighter and safer. Although the weight is only half of the classic garage lamp, it uses the same high-quality LED beads as the classic garage lights, It has the same brightness as the classic garage light, More cost-effective. Just Get It Now

Product features

100W 5+1 Daylight Garage Light

10000 lumen output, 6500K daylight, CRI>80, 85% energy saving.

Compared the incandescent lamp, you don't need to replace frequently, the life of the light source has more than 50000 hours, which greatly reduces maintenance costs.

EASY INSTALLATION & Color Rendering Index (CRI) ≧ 80

No tools required, no wiring and professional electricians are needed. Works great in a standard

light socket E26/E27. Installation is as easy as screwing in a light bulb.

This plenty of the light makes you feel like walking into another piece pure daylight from daytime. Its 80+CRI shows better color rendition, make the world of your vision more clear and truly.

Light color: Daylight

Suitable for: Indoor Lighting

Color Rendering Index (CRI) > 80

Average lifespan : 50,000 Hours

Material: High quality plastic

WIDE APPLICATIONS: Great for garage, basement, driveway, warehouse, barn, office, supermarket, restaurant, hotel, workshop etc.

• ✅ Super Bright - 4FT led shop lights feature 4400 lumens brightness at 5000K Daylight White by using only 42W. That is a staggering LED Efficiency of 105 lm/w! Excellent replacement of conventional fluorescent fixture. Energy Savings of up to 75%.
• ✅ High Quality - ETL certified for better quality, safety and reliability. This long-lasting LED shop light provides up to 50,000 hours of light before any maintenance is required.
• ✅ Linkable - 4ft linkable led shop light use plug connection to connect up to 4 pcs together in your garages, workshops, workbench areas, storage areas, warehouses, basements, equipment rooms, etc.
• ✅ Easy Installation - Plug & Play. Come with 59" power cord with on/off switch and other small accessories. You can hanging it with the included hanging chains or directly mounted to the ceiling with the included mounting screws.
• "✅ Our Warranty - All our's shop lights are confidently guaranteed for 5 years! We aim for quality followed up with quality customer service directly provided by manufacturer. "

User questions & answers

Question:	Do these come with bulbs for each light
Answer:	Hello, yes, each light has 2 LED tubes, thanks.
Question:	How log is the power cord? Is the same cord used to link other fixtures
Answer:	The power cord is approximately 5 feet. At the opposite end you will find a receptacle to plug another fixture into. Linking them together.
Question:	Can the seller or manufacturer comment on if these are shielded for radio interference? other led garage lights i've bought on amazon block signals
Answer:	I have several of these in my work shop and have experienced no interference with my radio !
Question:	How much noise do they emit? Are they reasonably quiet
Answer:	I have noticed zero noise with these lights in my shop; they are LED's and so they do not have a ballast so they shouldn't create any.

Product features

How many shop lights should I need to light up my garage?

e.g. Each light will cover 7ftx7ft area when installed at 8-10ft, If you have a 20ftx15ft garage that can park two cars, (20*15)/(7*7)=6.12，so you may need 6pcs of them to light up the whole space.

This light can also be used as overhead Workbench Light with the 59" power cord with inline switch.

The Electrician's Choice Series

If you're in a time crunch, you need a mark that symbolizes reliability. So forget tedious online shopping and look for the Electrician's Choice of products.

The Electrician's Choice is our essential line of products that are fit for most common projects. It provides you high performance and efficiency in a resilient package that will last you for years to come.

2 Mounting Methods

Install your lights to the ceiling by the following two methods:

1. Hanging Mount
2. Surface Mount

Linkable Design

The shop light is designed to be linkable, and link up to 6pcs shop light together with the included end-to-end connector.

Easy Installation

The shop lights can be easily wired with the included input cable or 59 inch power cord with inline switch.

Excellent Heat Dissipation

Our led shop light features heat dissipation holes at each end of the light for excellent heat-dissipation and prolonged life-span.

Product description

48 In. Hardwood Workbench 330lbs Weight Capacity

• Easy Woodworking: This multipurpose bench is ideal for your next carpentry or woodworking project. Measuring 4 feet in length and 1 feet 8 inch in depth, it is an ideal size for your garage or shop.
• Carpentry and Assembly: Crafted from hard Acacia wood with varnish finish, this bench features a slide drawer and convenient storage shelf. Ready for any home or professional workshop.
• Made to Last: Our durable and long-lasting tools help you with home, garage and industrial projects. With professional-grade quality, easily repair and fix issues with our tool cabinet essentials
• The Right Tool for the Job: We engineer a range of bolt cutters, clamps, chisels, folding carts, hammers, pliers, saws, screwdrivers, tape measures, utility knives, vises, bolt cutters, saws and wrenches
• Superior Instruments: Olympia Tools provides quality and innovative hand and specialty tools, tool accessories and outdoor equipment for construction, woodworking, mechanical maintenance and home repair

User questions & answers

Question:	How wide does the vise open
Answer:	The guide rods are shorter than the jack screw, do the effective opening is only about 7.5 inches. The jacks crew falls out of the nut at 8”.
Question:	what are the four wooden pegs for
Answer:	Leave one wooden peg where it is at and remove the rest. Place a longer board vertical on the peg. The vise is on the wrong side but if it was above the pegs you would then close the vise on the vertical board that is resting on the peg. This way you can work on the end of the board. Again vise is on the wrong side for this (or the pegs are on the wrong side) one way or the other they need to be on the same side.
Question:	I want to order some casters. What are the dimensions of the legs at the floor
Answer:	no need to measure legs --- prime has casters that will lift the table just fallow the instructions and bolt right in ----- SPACECARE Workbench Casters kit 600Lbs Heavy Duty Quick Release 2 Mounting Options Retractable Workbench Stepdown Caster Wheels Adjustable Polyurethane Durable Steel Construction (Set of 4) Visit the SPACECARE Store 4.2 out of 5 stars 266 ratings List Price: $49.99 Price: $33.99 & FREE Shipping. Details & FREE Returns
Question:	Can i mount a mitre saw on this
Answer:	I would not. The plywood top is only 3/4 " thick and 13" usable width. Mitre saws are heavy and this table is pretty light so it would tip. I have my mitre saw bolted on 2 2"X8"X48" across sawhorses.

Product description

Barrina 2FT LED Shop Light is a great option for lighting up garage, basement, work areas, rooms etc.. It could be plug & play or hardwrie to wall switch. Moreover, it could link up to 12 lights in a series, saving you installation cost and time. Barrina led lights provide you much brighter, cheaper and healthier lighting than conventional fluorescent light and can easily replace any existing fixtures.

• Super Bright - Barrrina shop light 2ft bring your application the best lighting available with an incredible minimum of 125lm/watt (Each light has 2500lm output). Illuminate the dark corners of your space
• Easy Installation - Plug and play, just use the included snap joints to hang it up and insert the plug to light it on. These led shop light are integrated fixture
• Linkable - Could connect up to 12 lights in series with provided 48 inches connector cords, reducing wiring and installation costs
• Scientific Design - Double row LED chips, V-shape 270 degree angle design, which shed more light on your products and makes products more brighter and better
• What You Get - 3 years warranty. 2 x Barrina T8 fixtures, 2 x Power cords with ON/OFF switch, 2 x Power hardwires, 2 x Installation accessories, 2 x Connector cables, 2 x Small connectors

User questions & answers

Question:	Can this light be hung from a chain
Answer:	Ye s
Question:	Where can I buy a reflector for this light
Answer:	Yes, Our Perfect POS system will keep track of employee's by unique login code and offer you key insight reports that will allow you track all of the following fields for each individual employee: Wages, Time Clock, No Sales, Invoices, and more!
Question:	Would these work for a barbers station
Answer:	nope
Question:	Can I use the light for gardening? (Tomato
Answer:	samar saleh
Question:	I purchased 1 leg but the bolts to connect the feet to the legs were not included. Is that correct
Answer:	Yes they will
Question:	With the height setting on the lowest level (30"?), what is the clearance under the horizontal, "Shop Fox" bar
Answer:	Why? EZfaux is Thicker: 2.4m made for High traffic areas (we are not flimsy shelf paper) were DURABLE with a 5 Layer process including top coating for protection. Heat, Fade, Water, Flame and Tear Resistant. EZfaux is Wider: 36" inches wide and in lengths up to 20 feet for a SEAMLESS INSTALLATION!! EZfaux is Eco-friendly: water-soluble adhesive and are non-toxic Because we take the health of our customer and Family Serious that is why our products are Quality Certification with optimum antibiotic powers of 99.9%. Ask us for a complementary sample and Compare why Ez Faux Decor has been in business in the USA since 1999. Ezfauxdecor is the only Peel and Stick Vinyl to be featured on Rachael Ray, QVC ,Today Show, HGTV, DIY, Steve Harvey and many more. Our products are used for Movies ,TV, Theater, Why? Its safe most realistic looking and we 100% guarantee our products.
Question:	Is it possible to use the horizontal bar that says "Shop Fox" for a shelf support? And if so, can you adjust the bar to various heights
Answer:	It is water resistant...........it is made of PP/PET and PVC all are plastic so the film is water resistant. I don't think it will withstand the humidity/and moisture if it is directly part of the shower. (the adhesive is what I would be concerned about)
Question:	Is this a set of two legs to complete a workbench, or do I need to order two of them
Answer:	Yes it is waterproof * THICKER: Made for "HIGH TRAFFIC AREAS" Top Quality Premium Film(not flimsy shelf liner paper) Use in kitchen, tile, backsplash, bathroom, cabinets, furniture, crafts, table, bookcase, shelf, door, wall and apartments, Remove with no sticky residue * WIDER: 36" inches WIDE for a SEAMLESS INSTALLATION means EASIER APPLICATION Less cutting, Less matching, Fewer Seams, Less Work, Less Money. Get the look of expensive Marble Granite Quartz Soapstone Calcutta Emperador Crema Marfil Limestone stones *DURABLE: Made with our 5 layer process including a Top Coating for protection against Heat (up to 240 degrees), Fade, Scratches, Water, and Tears. Manufactured in an ISO 9001 Certified Facility which provides high-quality product consistently. *SAFER: 5 Layer process to ensure safe food preparation. Any cleaner can be used to sanitize and clean the surface. Produced ISO 9001 Certified Facility. NON-TOXIC, NO INK, NO ODOR, NO PAINT. We take the health of our Customer and Family Serious *TOP QUALITY: Contact us for a COMPLEMENTARY SAMPLE and Compare why EZ FAUX DECOR (Est:1999 USA) has been on The Rachael Ray, QVC, Today Show, HGTV, DIY, Steve Harvey, Movies, and TV, Why, It's Safe, Easy to Use and the most Realistic Looking.

Product features

Plug and Play

• These 2FT led shop lights could plug & play or be hardwired to wall switch,solving the difficult to install them
• Just use the included snap joints to hang it up and insert the plug to light it on

Linkable

• You could link up to 12 lights together with included 48 inches connecting cords or small connector, reducing your installation cost and time

Wide Application

• Perfect for garage, storage area, workbench, basement, home, barn, office, station, attic, workshop, general lighting, display area etc.

Packing List

• 2 x LED T8 Fixtures
• 2 x Power cords with ON/OFF switch(59 inches length)
• 2 x Installation accessories
• 2 x Connector cables(48 inches length)
• 2 x Small Connectors
• 2 x Power Hardwire

Product description

Function：

The workbench bracket can help you work out of building your own work bench.



Material:

The workbench bracket kit made of heavy duty 3/16 inch thick structural steel.



Design:

The workbench brackets ensure that the legs and top will be parallel, plumb and square.



Package Included:

8 Pcs Workbench Bracket（8 brackets to build a bench any length, width or height you want while assuring the bench will be square and plumb.）and instruction.



Easy to install:

Add lumber or steel legs, and a wood or metal work surface, then bolt or weld it together.(Specific reference installation instructions)



Note： Use 4X4 and 2X4 Lumber: These 8 galvanized steel corner brackets are designed to be used in conjunction with four 4x4 posts and eight 2x4 framing boards.

• The workbench bracket can help you work out of building your own work bench.
• Material: The workbench bracket kit made of heavy duty 3/16 inch thick structural steel.Coated with green powder.(Prevent rust and corrison)
• Design:The workbench brackets ensure that the legs and top will be parallel, plumb and square.
• Package Included:8 Pcs Workbench Bracket（8 brackets to build a bench any length, width or height you want while assuring the bench will be square and plumb.）and instruction.
• Easy to install:Add lumber or steel legs, and a wood or metal work surface, then bolt or weld it together.(Specific reference installation instructions)