13 best house water filter system

Product description

The WGB21B is a great "point of entry" filtration system and excellent alternative to the larger WGB22B (4. 5"X20") for smaller homes or where limited space may be a concern. Unlike "point of use" systems the WGB21B will filter water directly from your source. This means that water from every outlet in your home will have passed through this filter, providing up to 50, 000 gallons of clean water for the entire family. The first stage of this system houses a 5-micron high-capacity polypropylene sediment filter (FP15B). This filter is responsible for removing dirt, rust, and most suspended solids, to protect and extend the life of the CTO carbon block filter. The second stage houses the 5-micron CTO coconut shell carbon block filter (FC15B). Block carbon is more effective than other forms of carbon in that it is finely ground up carbon packed into a solidified block. This means they have a higher density than other types of carbon filters, and are therefore more effective in removing their targeted contaminants. The carbon block filter knocks out bad tastes and odors, removes over 90% of sediment and chlorine from the water, and is highly effective on organic chemicals (VOCs) like pesticides, herbicides, and industrial chemicals. If you are on city water, your local water utility must meet very strict Federal and State standards for purity. Almost all municipally treated water is chlorinated, and this can affect taste and create odors in the water. The WGB21B filtration system will remove these tastes and odors. If you are on a private well or spring, you should have your water tested. You may also want to contact our technical staff in Atltant, GA for help in selecting the best filter system for your water chemistry.

• [Two-Stage Effective Filtration] 1st-Stage premium 5-micron polypropylene sediment filter (FP15B) captures dirt, sand, silt, dust, rust, and scale particles and extends the life of CTO carbon block filter. Using high quality coconut shell carbon and highly compact fabrication tech, 2nd-stage CTO filter(FC15B) knocks out cloudiness as well as bad tastes and odors, removes over 90% of chlorine, and is highly effective on VOCs like pesticides, herbicides, and industrial solvents.
• [Superb Filtration Capacity] 10"x4. 5" replaceable whole house water filters can provide up to a full year of clean water(up to 50, 000 gallons) for a family of four. 1-inch inlet and outlet ports allow fast water flow with less pressure loss. Fine PP sediment filter and premium quality CTO filter not only bring clean and fresh water to every faucet in your house, but also help prolong the lives of your water-using appliances and protect plumbing from sediment and scale buildup.
• [Easy Installation and Filter Change] The system comes pre-assembled onto the mounting bracket for a streamlined, DIY installation. Filter wrench included to make routine filter changes easy and quick. A pressure release valve allows for the release of built-up pressure when changing filters. Refer to our manual and/or YouTube videos to Install this point-of-entry (POE) filtration system at the main water supply to get clean and healthy water for the entire family.
• [Top-Notch Customer Service] Backed by a 30-day money-back guarantee. 1-Year manufacturer warranty and extended upon registration at iSpring. Lifetime customer and tech support from Atlanta, GA.
• [TDS Note] Unlike an RO system, this system will NOT reduce Total Dissolved Solids (TDS), and instead keeps healthy minerals in your water. If you are interested in a filter that removes TDS, consider our iSpring Reverse Osmosis (RO) systems.

User questions & answers

Question:	How does this unit flow 15 gpm when the replacement filter states that it has a max flow of 3gpm
Answer:
Question:	What is the difference between this small whole house filter(10'') and big whole house system
Answer:
Question:	is flow left to right, right to left, or can it go either way
Answer:
Question:	I have a white build up on my coffee maker, will these filters stop it
Answer:

Product features

Frequently Asked Questions

Q: With this whole house system, do I still need to install a water softener if my water is very hard?

A: Yes, a water softener is needed if your source water has a high level of hardness, usually with TDS higher than 700 PPM. Hard water can reduce the lifespan of whole house water filter cartridges. The harder the water, the greater amount of scale buildup occurs, and the sooner the filters get clogged.

This whole house water filter can remove up to 95% of sediment, chlorine, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants that a regular water softener can't, although it does not soften your water. It is recommended that you install this WGB21B series whole house system after your water softener to achieve optimal performance if you have hard water.

To determine which product best suits your needs, it is recommended that you get a professional water test done prior to purchase to identify the main issue of your source water.

Note: Water Softeners and whole house systems usually do not lower the TDS level of the water. An additional Reverse Osmosis system may be necessary for your drinking water. Please consult iSpring professionals prior to purchase if you are unsure of which product will meet your needs.

• Whole House Water Filter: Reduce harmful contaminants from your entire home’s water with Express Water’s 3 Stage Water Filtration System. Standard Water Filter: Drink the healthiest water on Earth as your home water filter reduces over 52 different contaminants from your water including chlorine, rust, pesticides, and more.
• Express Water’s water filtration systems are ready to install with 1” inch standard connections. Easy to Replace Water Filter Cartridges: All Express Water whole house water filter replacement cartridges are designed for quick and easy replacement to keep your system up and running.
• Durable Whole House Water Filter: Express Water Whole Home Water Filtration Systems are constructed with standing stainless-steel frames for long term durability and quality.
• On Demand Support: Support from experts who can answer any of your questions about your new home water filter. Quality Guaranteed: Rest easy with our 1-year warranty on all Express Water Whole Home Water Systems
• Please be informed - this whole house system is installed at the main water supply line for the purpose of treating all incoming water in your home or business. Unlike reverse osmosis systems, this system will NOT reduce Total Dissolved Solids (TDS). If you are searching for a filter that removes TDS, we recommend our Express Water Reverse Osmosis systems.

User questions & answers

Question:	How important is a water test before chosing a filter system. And is rust also called iron eating bacteria
Answer:	Rust is not iron eating bacteria. Rust is ferric oxide, which is just iron combined with oxygen. Sulfur smells from iron rich water typically come from your water heater. The bacteria thrive on the metals in sacrificial anode rod in your water heater. Once the bacteria get in the water heater, you will need a powered anode rod and an iron removing system to fix the problem. For anyone on a well with iron, I recommend the following: 1) Get a powered anode rod to replace your sacrificial anode rode in your water heater. Do the chlorine or peroxide disinfection of the heater when installing to kill the existing bacteria. 2) Get this system. You may need to use an iron reducing filter in the third canister instead of a second carbon filter if your water softener isn’t reducing your iron to 0 parts per million, and put this system after the softener using iron reducing salt. 3) replace the filters as recommended without delay. 4) add a UV light sterilizer after these filters. These steps will immediately remove the sulfur and iron smell as the bacteria won’t have iron to eat, or be sustained from the magnesium in the standard anode rod in the water heater. My water went from cloudy brown and smelly to crystal clear perfection after doing this fix.
Question:	Can i change direction of the water flow, did anyone do this. Can the gauges be moved to accommodate the change
Answer:	Dear Valued Customer, Thank you for your interest in Express Water products. You may change the direction of water flow on the Whole House System to go IN from LEFT and OUT on the RIGHT. At the time of purchase, we kindly ask if you could please leave a note to seller of your request and we will gladly accommodate your request to switch the direction of flow. If you already have the system, you may remove the (12) screws on top of the Metal Bracket. Once all (12) screws are removed, flip the Metal Bracket in the opposite way and put the (12) screws back on. You may install the Pressure Gauges after the modification. Best regards, Express Water Team Toll-free (800) 992-8876 Monday - Friday 10:00 AM - 5:00 PM (PST)
Question:	Anybody know the maximum flow rate in gallons per minute and/or the pressure drop across this (assuming new filters and 50 psi head pressure
Answer:	Depends on the filters used, pipe size and how it was installed. If you just want to know if you will have enough pressure to shower and use laundry machine or dishwasher. It will be fine as long as you don't use smaller than 3/4 inch supply in and out of this. I'd consider using pex if you want the best flow due to having much less fittings and elbows. I would say at minimum 5- 10 GPM. Hope this helps.
Question:	Does this water filter system filter Calcium
Answer:	The next model up in price range claims to remove scale and the details of that product shows it filters with poly-phosphate (scale remover) so $30 more for that extra - might be worth it as long as your’e not on well water.

Product features

Heavy Duty Construction

Made with high quality 100% food-grade materials the Express Water 3 Stage Whole House Filtration System is built to last. All components are independently tested and verified to meet NSF / ANSI standards. The 3 housings are made from high durability food-grade ABS and PCE plastic. Each housing is connected with industrial bonded high capacity flow connectors. Every connection is rated for up to 0.25 gallons per second at 45-80 psi.

The housings are precision fitted to a durable stainless freestanding mount. The first filter housing is translucent so you can see your filter and know when it needs to be replaced. The filter is verified by independent laboratory testing to meet NSF / ANSI standards.

Fast Flow Filtration

Express Water offers several features unique to this system

• Triple filtered water for your entire home with no pressure loss
• Save on water! Our filter doesn’t send any water down the drain
• Our high flow design can supply up to 0.25 gallons per SECOND
• Save your time and your money with high capacity filters. The life of your filters will depend on the quality of your water. On average each set of filters is good for up to 100,000 gallons or 6-12 months of use.

Save Your Time

Filter changes are quick and easy with simple efficient design

• Simple twist off housings and drop-and-go filter design takes the hassle out of your filter change
• Three accessible pressure release buttons for easy filter removal
• Our clear 1st stage filter housing allows you to confirm when your filter needs replacing without dismantling the system
• Three pressure gauges included! Monitor your system’s performance, know which filters you need to change and when to change them
• Solid free standing frame means mounting is optional. Use your system your way!

Express Water Advantage

Only from Express Water! We offer several features unique to our system.

• Freestanding Stainless Steel Frame: Makes your installation and filter changes easier while adding a protective buffer for your system.
• Clear 1st Stage Filter Housing: The easiest way to see when you need a filter change.
• Pressure Gauge Monitoring: We include a pressure gauge for each filter for easy system monitoring

Stage 1: Sediment

The first stage of filtration is your Sediment Filter. This prevents coarse damaging contaminants like sand, rust, and dirt from damaging your appliances and your other filters.

Made with precision packed food-grade polypropylene microfiber our sediment filters feature 4 distinct layers catching contaminants down to 5 microns. The outer layers catch the coarsest contaminants and the inner layers catch finer sediments and particles. This means your filter lasts long and catches more before it needs to be replaced.

Stage 2: Granular Carbon

The second stage of your Whole House System is a Granular Activated Carbon Filter. The GAC captures Chlorine, Volatile Organic Chemicals (VOC), Herbicides, Industrial Solvents, Insecticides, and Chemicals causing bad taste, odor, and cloudiness. This stage is focused on capturing chemical contaminants.

The GAC is made with efficiently distributed carbon granules to create full coverage filtration. Our Equal Flow GAC design gives you maximum chemical absorption.

Finished with a thermal bonded cap and industrial sealed silicon ring makes it durable and reliable.

Stage 3: Carbon Block

The third stage filter is your Activated Carbon Block. The ACB Filter captures Chlorine, Total Organic Carbon (TOC), Pharmaceuticals, Turbidity, Pesticides, and Chemicals causing bad tastes and odors. This stage focuses on taste and

drinkability of your water and removing chemicals.The ACB is made with tight packed, laboratory vacuum heated carbon for high capacity filtration. This maximizes the surface area of carbon to give you long service life.Finished with a thermal bonded cap and industrial sealed silicon ring to make sure it’s durable and reliable.

Simple Setup

We designed the three stage whole house filtration system to be easy to install

• We include a free standing frame to allow you to choose a mounted or unmounted installation
• Standard 1” connections for easy adaptability and high flow
• Pressure gauges make it easy to see the state of your system
• Free lifetime support

Product description

Protect your home, health, and appliances by filtering all of your incoming water. The Express Water Whole House 3 Stage Water Filter removes major contaminants from your water supply and provides clean water for drinking, showering, cooking, and other home uses. This system removes major water contaminants like Chlorine, Rust, Pesticides, Dirt, Sand, Insecticides, Silt, Turbidity, Volatile Organic Chemicals (VOC), Herbicides, Cloudiness, Industrial Solvents, Total Organic Carbon (TOC), Pharmaceuticals, Turbidity, Odors, and Cloudiness.

Prevent your plants from building up rust and other damaging sediments. Give healthier water to your pets. Extend the life of your dishwasher, laundry machine, and other appliances, and reduce the energy cost.

Our Whole House System is designed to be easy to use and efficient. A filter set is good for up to 100,000 gallons or 6-12 months, depending on incoming water quality. Your filter life may be different depending on your water quality, temperature, and incoming pressure. Comes complete with a full filter set, including Sediment, Granular Activated Carbon, and Activated Carbon Block Filter. The large 1” connections and long high efficiency housings are designed for almost no reduction in your home’s water pressure.

This is a durable, heavy-duty whole house system able to deliver up to 0.25 gallons of water every second. The system comes fitted to a stainless steel freestanding frame which allows for installation on the ground or a mounted installation. This system is designed to be used in a dry level area protected from freezing temperatures and direct sunlight. The system works with 45-80 psi and water temperatures between 40-100℉. The system includes pressure release buttons for each filter and pressure gauges for system monitoring.

Have cleaner more convenient than any pitcher, faucet filter, or shower head systems. Express Water’s 3-Stage Whole House Water Filtration System WH300SCGS is the complete solution for your home.

Product description

Aquasana Premium Rhino Whole House Filter gives you healthy, clean, great-tasting water from every tap in your home by removing up to 97% of the chlorine in regular tap water and reducing the following harmful water contaminants for 10 years or one million gallons:

• pesticides
• herbicides
• rust
• silt
• sediment
• water soluble metals
• industrial solvents

Get healthier skin and hair by reducing your body's exposure to harsh chlorine and synthetic chemicals that can cause damage and excessive drying. Breathe easy knowing you have improved air quality by removing chlorine from your shower steam.

Our dual tank Simply Soft salt-free descaler is designed to hook up seamlessly with your whole house water filter system. Effective scale prevention for the entire house without the use of chemicals or salt. Protect your home appliances and plumbing by reducing the adverse effects of excess iron and scale. Be free of scale, stains and spots on faucets, shower heads and glassware. Aquasana Simply Soft uses innovative Scale Control Media (SCM) softening technology to naturally condition your water without the use of added sodium. SCM technology alters the structure of the hard minerals into a crystal structure that prevents the minerals from binding and forming scale build-up. Unlike salt-based water descalers, Aquasana Simply Soft SCM technology will not demineralize your water nor will it negatively affect the environment by adding excessive amounts of sodium into our communal water system.

Installation kit included for 0.75 inch pipe fittings.This product may arrive separately in multiple packages. *PEX tubing is not included.

• Clean, Great Tasting Water From Every Tap In Your Home - Removes 97% of chlorine and reduces harmful contaminants like lead, mercury, herbicides, pesticides, VOCs, and more
• High-Performance Filter System - Salt-free conditioner, carbon & KDF filtration engineered to maximize filtration and reduce scale while leaving healthy minerals in your water. This system will NOT reduce Total Dissolved Solids (TDS)
• Cost Efficient & Long Lasting - Clean water for less than $0.01 a gallon - Save twice as much compared to other brands on purified water for 1 million gallons or 10 years
• Easy Maintenance - No draining or back flushing needed - Easily replace pre and post filters every 3 months for best filtration and flow rate
• Top-Grade Install Kit & Components - System includes filter tank, conditioner tank, 20" pre-filter, post-filter, brass fittings for 1'' or 3/4'' pipes, bend supports, and shut-off valves – Item may ship in more than one box and may arrive separately

User questions & answers

Question:	Can you get it with a larger line and higher flow rate
Answer:	From the floor to the top of the bowl is 15". A seat is not included, but generally seats are approximately 2" in thickness. Sincerely American Standard Technical Team.
Question:	does this unit remove fluoride
Answer:	You will need a wax ring.
Question:	How does the 600,000 gal filter compare to this one as far as size is concerned
Answer:	These will be for both.
Question:	how often do you need to change cartridges
Answer:	The bolts will be included but not a wax ring

Product description

The WGB32BM whole house filtration system is the ideal "point of entry" filtration system for cleaning up well water. Unlike "point of use" systems (like reverse osmosis systems) that are installed to supply water to a specific faucet, the WGB32BM filters your water from the source. This means water from every output in your home will have passed through the three filtration stages of the WGB32BM. So what exactly do these three stages of filtration offer? Used as the first stage of defense on the system, the stage 1 housing holds a 5-micron high-capacity polypropylene sediment filter. This filter removes dirt and other various larger sized particles from the water that can clog the following filters. The second stage of the WGB32BM houses a 5-micron CTO coconut shell carbon block filter. Block carbon is more effective than other forms of carbon in that it is finely ground up carbon packed into a solidified block. This means they have a higher density than other types of carbon filters, and are therefore more effective in removing their targeted contaminants. The carbon block filter knocks out bad tastes and odors, removes up to 95% of chlorine from the water, and is highly effective on organic chemicals (VOCs) like pesticides, herbicides, and industrial chemicals. The third stage of the WGB32BM has an iron and manganese reducing filter - also great for the plethora of heavy metals found in well water sources. The FM25B iron and manganese reducing filter is only included with the WGB32BM, as it is not needed for most municipal water supplies that the WGB32B targets. If you are on municipal (city) water or a generally clean water supply, you may want to consider the WGB32B over the WGB32BM. For removing the common contaminants and heavy metals found in the majority of well water supplies however, the WGB32BM fits the bill.

• Protect your family and household appliance from iron, manganese and more; our 3rd stage filter (FM25B) is specially designed for iron and manganese removal, reducing iron (MAX 3.0 ppm down to 0.01 ppm) and manganese (MAX 1.0 ppm down to 0.01 ppm); our filter lasts up to 3 times longer than greensand due to the catalytic media not being consumed in the process; the system also removes sediment, chlorine, rust, pesticides, herbicides, industrial solvents, VOCs and various other contaminants
• DIY installation and maintenance - refer to our manual and our helpful YouTube videos for easy DIY installation. With 1 in. NPT inlet / outlet and big blue 20 in. x 4.5 in. filter cartridges, the system has minimum impact on water flow (up to 15 GPM) and requires minimum maintenance
• Top-notch quality - the first stage high capacity polypropylene sediment filter is able to achieve filtration down to 5 microns; the second stage CTO Carbon Block filter is made of high quality coconut shell carbon for maximum filtration efficiency and filter life. Both are tested by an independent third-party to meet NSF/ANSI standards. Both filters have a capacity of 100,000 Gal. of water, enough to supply a family of four with clean water for a full year; the cartridges are individually wrapped to ensure freshness; please unwrap the cartridges before use
• Peace of mind customer service - register online to activate your 1-year manufacturer warranty and life-time free tech support from U.S. local support team; we stand behind our products and if you encounter any problems with any of our products please reach out to us immediately; we are happy to help
• Please note - this system is installed at the main water supply line in order to treat all the water in your home; unlike an RO system, this system will NOT reduce Total Dissolved Solids (TDS) and instead keeps healthy minerals in your water; if you are interested in a filter that removes TDS consider our iSpring Reverse Osmosis (RO) systems

User questions & answers

Question:	I received this whole house filter and one of the cartridges is broken model fc25b. can i get a replacement of this broken cartridge
Answer:	allfilters.com I used iSpring for a while and then the types of filters ordered was so confusing......and its all made in China.......unlike advertised. So I switched to allfilters....now keep in mind that they don’t send one at a time....but the price difference, the nonconfusion, sent by USPS and customer support won me over. ALL MADE IN THE USA! Allfilters also sells the canisters. When ordering filters go by the size ei: 4 1/2” x 20”
Question:	Can i add feverse osmosis
Answer:	Hi, Yes, you can add a reverse osmosis system aside from this one which will be dedicated to drinking and cooking water purposes. For more details, please contact us at (678)261-7611 or visit our website and click the "Support" link on top to create a support ticket. We will respond within 24 business hours. Thanks, iSpring Water Systems LLC
Question:	Does this system remove fluoride, arsenic and copper
Answer:	Hi Diana, This system removes arsenic and copper, but it does not remove fluoride. Reverse osmosis is the best water treatment for removing fluoride. If you have any questions or need additional assistance, please contact us at support@123filter.com or call us at (678) 261-7611. Thanks, iSpring Water Systems, LLC
Question:	We are looking to install this in a seasonal cabin, can this be winterized
Answer:	Hi Cate, This unit should be protected from direct sunlight or freezing temperature. Depending on the environment in the winter, the housings might become damaged. Please contact us with more details so we can better assist you. iSpring Water Systems 678-261-7611 support@ispringfilter.com

Product features

Frequently Asked Question

Q: With this whole house system, do I still need to install a water softener if my water is very hard?

A: Yes, a water softener is needed if your source water has a high level of hardness, usually with TDS higher than 700 PPM. Hard water can reduce the lifespan of whole house water filter cartridges. The harder the water, the greater amount of scale buildup occurs, and the sooner the filters get clogged.

This whole house water filter can remove up to 95% of sediment, chlorine, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants that a regular water softener can't, although it does not soften your water. It is recommended that you install this WGB32B series whole house system after your water softener to achieve optimal performance if you have hard water.

To determine which product best suits your needs, it is recommended that you get a professional water test done prior to purchase to identify the main issue of your source water.

Note: Water Softeners and whole house systems usually do not lower the TDS level of the water. An additional Reverse Osmosis system may be necessary for your drinking water. Please consult iSpring professionals prior to purchase if you are unsure of which product will meet your needs.

Product description

The WGB32B whole house filtration system is the ideal ""point of entry"" filtration system for cleaning up water supplies to a home or business on municipal (city) water. Unlike "point of use" systems (like reverse osmosis systems) that are installed to supply water to a specific faucet, the WGB32B filters your water from the source. This means water from every output in your home or business will have passed through the three filtration stages of the WGB32B. So what exactly do these three stages of filtration offer? Used as the first stage of defense on the system, the stage 1 housing holds a 5-micron high-capacity polypropylene sediment filter. This filter removes dirt and other various larger sized particles from the water that can clog the following filters. The second and third stages of the WGB32B house 5-micron CTO coconut shell carbon block filters. Block carbon is more effective than other forms of carbon in that it is finely ground up carbon packed into a solidified block. This means they have a higher density than other types of carbon filters, and are therefore more effective in removing their targeted contaminants. The carbon block filters knock out bad tastes and odors, combine to remove over 90% of chlorine from the water, and are highly effective on organic chemicals (VOCs) like pesticides, herbicides, and industrial chemicals. If you are on well water or have unusual contaminants in your municipal water supply, you may want to consider the WGB32BM over the WGB32B. For removing the common contaminants found in the majority of municipal water supplies however, the WGB32B fits the bill.

• Protect Your Family and Household Appliance from Sediment, Chlorine, and More: Say goodbye to smelly, bad tasting water! Our system removes up to 99% of chlorine from water as well as up to 95% of sediment, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants. This system is installed at the main water supply line in order to treat all the water in your home.
• DIY Installation and Maintenance: Refer to our manual and our helpful YouTube videos for easy DIY installation. With 1” NPT inlet / outlet and Big Blue 20” x 4.5” filter cartridges, the system has minimum impact on water flow (up to 15 GPM) and requires minimum maintenance.
• Top-Notch Quality: The first stage high capacity polypropylene sediment filter is able to achieve filtration down to 5 microns. The second and third stage CTO Carbon Block filters are made of high quality coconut shell carbon for maximum filtration efficiency and filter life. Both are tested by an independent third-party to meet NSF/ANSI standards. The system has a capacity of 100,000 gallons of water, enough to supply a family of four with clean water for a full year.
• Peace of Mind Customer Service: Register online to activate your extended manufacturer warranty and life-time free tech support from U.S. local support team. We stand behind our products and if you encounter any problems with any of our products please reach out to us immediately. We are happy to help!
• Please Note: Unlike an RO system, this system will NOT reduce Total Dissolved Solids (TDS), and instead keeps healthy minerals in your water. If you are interested in a filter that removes TDS, consider our iSpring Reverse Osmosis (RO) systems.

User questions & answers

Question:	Are the internal metal fittings certified lead free as required post January
Answer:	There is certificate to confirm lead free, but Calf. require Prop. 65 label if there is lead. In this case,I do not see any warning label--meaning no consern of lead contamination.
Question:	Are the filters in this system compatible/interchangeable with those of the Home Master HMF3SDGFEC
Answer:	i am very happy with this filter system. i have well water and have not been able to drink the water for a long time. after we installed this system our water is drinkable now. the company was the best with help on any question we had and so friendly. YES I would recommend this to anyone that has well water. we have tested the water now 2 different time and very happy with the result.
Question:	how is ispring-wkb32b attached to inlet
Answer:	1 inch pipe thread fitting...in and out
Question:	I bought this from you and I need replacement filters. Can you give me the ordering info for the 2 types of filters - maybe brand & product numbers
Answer:	There are a variety of filters available in the 4.5x20" size. All of them will work. You need to choose for yourself based on your filtering needs. I get mine here:http://123filter.com/catalog/index.php?cPath=64_32

Product features

Frequently Asked Question

Q: With this whole house system, do I still need to install a water softener if my water is very hard?

A: Yes, a water softener is needed if your source water has a high level of hardness, usually with TDS higher than 700 PPM. Hard water can reduce the lifespan of whole house water filter cartridges. The harder the water, the greater amount of scale buildup occurs, and the sooner the filters get clogged.

This whole house water filter can remove up to 95% of sediment, chlorine, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants that a regular water softener can't, although it does not soften your water. It is recommended that you install this WGB32B series whole house system after your water softener to achieve optimal performance if you have hard water.

To determine which product best suits your needs, it is recommended that you get a professional water test done prior to purchase to identify the main issue of your source water.

Note: Water Softeners and whole house systems usually do not lower the TDS level of the water. An additional Reverse Osmosis system may be necessary for your drinking water. Please consult iSpring professionals prior to purchase if you are unsure of which product will meet your needs.

Product description

The WGB22B whole house filtration system is the ideal "point of entry" filtration system for cleaning up water supplies to a home or business on municipal (city) water. Unlike "point of use" systems (like reverse osmosis systems) that are installed to supply water to a specific faucet, the WGB22B filters your water from the source. This means water from every output in your home or business will have passed through the two filtration stages of the WGB22B. So what exactly do these two stages of filtration offer? Used as the first stage of defense on the system, the stage 1 housing holds a 5-micron high-capacity polypropylene sediment filter. This filter removes dirt and other various larger sized particles from the water that can clog the following filters. The second stage of the WGB22B houses a 5-micron CTO coconut shell carbon block filter. Block carbon is more effective than other forms of carbon in that it is finely ground up carbon packed into a solidified block. This means they have a higher density than other types of carbon filters, and are therefore more effective in removing their targeted contaminants. The carbon block filter knocks out bad tastes and odors, removes up to 99% of chlorine from the water, and is highly effective on organic chemicals (VOCs) like pesticides, herbicides, and industrial chemicals. The WGB22B is intended for lightly contaminated municipal water. If your water is highly chlorinated (to the point where you can smell, taste, and/or feel it), the WGB32B will be your best option as it has dual CTO carbon block filters to provide additional filtration measures. Alternatively if you are on a well water source, you will want to take a look at the WGB32BM, which has an iron and lead reducing filter - great for the plethora of heavy metals found in most well water sources. For standard municipal water that hasn't been heavily chlorinated however, the WGB22B is a great choice.

• Protect Your Family and Household Appliance from Sediment, Chlorine, and More: Say goodbye to smelly, bad tasting water! Our system removes up to 99% of chlorine from water as well as up to 95% of sediment, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants. This system is installed at the main water supply line in order to treat all the water in your home.
• DIY Installation and Maintenance: Refer to our manual and our helpful YouTube videos for easy DIY installation. With 1” NPT inlet / outlet and Big Blue 20” x 4.5” filter cartridges, the system has minimum impact on water flow (up to 15 GPM) and requires minimum maintenance.
• Top-Notch Quality: The first stage high capacity polypropylene sediment filter is able to achieve filtration down to 5 microns. The second stage CTO Carbon Block filter is made of high quality coconut shell carbon for maximum filtration efficiency and filter life. Both are tested by an independent third-party to meet NSF/ANSI standards. Both filters have a capacity of 100,000 gallons of water, enough to supply a family of four with clean water for a full year.
• Peace of Mind Customer Service: We stand behind our products and if you encounter any problems with any of our products please reach out to us immediately. We are happy to help! Register online to active extended manufacturer warranty with lifetime personalized support.
• Please Note: Unlike an RO system, this system will NOT reduce Total Dissolved Solids (TDS), and instead keeps healthy minerals in your water. If you are interested in a filter that removes TDS consider our iSpring Reverse Osmosis (RO) systems.

Product features

Frequently Asked Questions

Q: With this whole house system, do I still need to install a water softener if my water is very hard?

A: Yes, a water softener is needed if your source water has a high level of hardness, usually with TDS higher than 700 PPM. Hard water can reduce the lifespan of whole house water filter cartridges. The harder the water, the greater amount of scale buildup occurs, and the sooner the filters get clogged.

This whole house water filter can remove up to 95% of sediment, chlorine, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants that a regular water softener can't, although it does not soften your water. It is recommended that you install this WGB22B series whole house system after your water softener to achieve optimal performance if you have hard water.

To determine which product best suits your needs, it is recommended that you get a professional water test done prior to purchase to identify the main issue of your source water.

NOTE: Water Softeners and whole house systems usually do not lower the TDS level of the water. An additional Reverse Osmosis system may be necessary for your drinking water. Please consult iSpring professionals prior to purchase if you are unsure of which product will meet your needs.

Frequently Asked Questions

Q: With this whole house system, do I still need to install a water softener if my water is very hard?

A: Yes, a water softener is needed if your source water has a high level of hardness, usually with TDS higher than 700 PPM. Hard water can reduce the lifespan of whole house water filter cartridges. The harder the water, the greater amount of scale buildup occurs, and the sooner the filters get clogged.

This whole house water filter can remove up to 95% of sediment, chlorine, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants that a regular water softener can't, although it does not soften your water. It is recommended that you install this WGB22B series whole house system after your water softener to achieve optimal performance if you have hard water.

To determine which product best suits your needs, it is recommended that you get a professional water test done prior to purchase to identify the main issue of your source water.

NOTE: Water Softeners and whole house systems usually do not lower the TDS level of the water. An additional Reverse Osmosis system may be necessary for your drinking water. Please consult iSpring professionals prior to purchase if you are unsure of which product will meet your needs.

Product description

The WH-HD200-C Heavy Duty clear whole house system with clear sump allows you to see your filter in action. Included with the unit is a mounting bracket, housing wrench, filter life indicator, built in shut-off, bypass, and pressure relief valve.

• Whole house water filtration system with 1" stainless steel reinforced inlet/outlet connectors
• Perfect for residential homes, helps protect appliances and pluming from sediment and scale
• Features bypass shut off valve, integrated bracket design and battery operated filter change timer
• Reduces: sediment, rust, scale, dirt, coarse sand, sand, fine sand, silt, bad taste, odor, aesthetic chlorine taste and odor (depending on filter cartridge)
• The WH-HD200-C housing has been tested and certified by WQA against NSF/ANSI 372 for low lead compliance, CSA B483.1 and NSF/ANSI 42 for material safety and structural integrity requirements only
• Includes: WR-HD housing wrench, mounting bracket, filter life monitor and filter monitor battery
• Compatible with Culligan filter cartridges: R50-BBSA, CW25-BBS, CP5-BBS, CW5-BBS, RFC-BBSA

User questions & answers

Question:	What is the pressure drop across the filter? What kind of a flow can one expect? What if one has a couple of showers going simultaneously
Answer:	I am on city water, we get lots of calcium scale. So I am using a calcium filter right after the meter (to keep scale out of all my pipes) then a carbon under sink filter for taste. I don't care if my boiler or toilet water tastes good, but want better taste out of the sink, dishwasher, ect.
Question:	If the valve is in the 'off' or 'bypass' position can you change the filter without having water spray everywhere
Answer:	If you use the right Carbon filter with this housing, it will reduce lead. As sold here, it will not. In a water purification system for drinking water, you would want one prefilter stage (like this) and at least one carbon filter stage (this housing with a good carbon filter would work). Your flow rate, intended use, and other factors will affect which system you should choose. This is sold as a whole-house filter, not a drinking water system.
Question:	This looks like a great filter. But should come with a spare ring. Always where the filter range and what each one does and micron
Answer:	It uses the standard 10 inch filters that are pretty much universally available including Dupont, Culligan, Micronex, and many others.
Question:	Has anyone else had a drop in water pressure after installing this filter
Answer:	Any standard 10" replacement cartridge can be used with this filter housing. The "Frequently Bought Together" section has a sample of filters available. I use a sentiment cartridge ahead of a charcoal cartridge (in 2 separate filter housings) to remove particulates and odors from my water. Works very well.

Product features

Culligan WH-HD200-C Whole House Heavy Duty 1" Inlet/Outlet Filtration System

The Culligan Whole-House Sediment Water Filter Housing makes sure your family has a clean, fresh water supply throughout the house. This filtration system works to reduce dirt, sand, and silt buildup in plumbing lines. Your kitchen, laundry room, bathroom, and outdoor water comes out clean and fresh to help keep your family healthy.

Prolongs the Lives of Your Water-Using Appliances

Humans aren't the only ones who benefit from clean water-machines also run more smoothly, and longer, when the water they take in is fresh and dirt free. Because the Sediment Water Filter Housing limits the amount of dirt and grime introduced into your appliances, your home's water-using devices are likely to last longer and perform at their best.

Product description

Our sediment filterhelps reduce the level of sand grains, soil, rust, and other floating particlesthat can wreak havoc on your water fixtures and appliances.

• This filter system works with Wholehouse Water Filtration Systems, including GE GXWH40L, Culligan R50-BBSA, DuPont WFHDC3001, Pentek R50-BB, etc, and with Undersink Water Filtration Systems, RO System
• 【Your first line of defense】 Reduce the workload of your existing water filters with our sediment filter. It is designed to trap impurities and keep them from reaching your home's water supply.
• 【Filter out more impurities】Keep your water clean with this spin down whole house filter. It houses a 50-micron 316L molybdenum alloy filter that blocks impurities such as rust or small objects.
• 【Stress-free maintenance】Cleaning our whole house water filter system is a breeze. Turn on the backwash function to flush out sediments that have been trapped on the filter screen.
• 【Quick & easy installation】 Install this home water filter to your main water supply in minutes. It provides four types of connection fittings (1”MNPT, 3/4”MNPT, 3/4” FNPT and 3/4”push-fit plumbing fittings. NOT FOR 3/4“ garden hose) to fit different water tubes in your family, and it won't affect your existing water pressure levels.
• 【Built tough - German-made PA12 shell】 Our spin-down sediment water filter is designed to last many years. Its heavy-duty plastic housing is housed in a non-BPA, German-made PA12 shell, which has been subjected to rigorous voltage, pressure, explosion, and prolonged water hammer impact tests. It is proven to withstand bursting pressures of more than 600psi and has excellent water hammer resistance.

User questions & answers

Question:	How does the back-washing function work
Answer:	Correct, this bowl would be 16.5" tall.
Question:	Do you sell a rpfk 100 micron spin down filter
Answer:	You can visit the American Standard website and find the product specification sheet. Your American Standard Consumer Connection Team.
Question:	my h20 is extremely irony. i replace my 10:-5 micron paper sediment once a month. is this the right filter for my purpose
Answer:	Amazon Customer, This Cadet model will not include a seat. But any universal elongated seat can be used. Such as our Cadet seat model # 5257.115.020. Sincerely, your American Standard Consumer Connections Team.
Question:	Can this be installed in diagonally
Answer:	No, the American Standard 215CB.104 does not come with a seat. It will be a separate purchase. Your American Standard Consumer Connection Team.

Product features

Want to make sure that your water supply is free from sediment, sand, or floating particles?

According to the CDC, more than 19 million Americans get affected by drinking contaminated water. Installing water filters on your taps is a good step to take in order to have fresh and clean water for your home. But if these filters get saturated with sediment and sand, that may reduce their filtering efficiency and shorten their lifespan.

The Spin Down Sediment Filter by Waterdrop helps keep your tap water free from sediment and small particles.

Push fitting included

Waterdrop spin down sediment backwashing water filter includes two 3/4-inch push-to-connect fittings that are easy to install copper, PEX and CPVC pipes with no need of extra tools.

It's easy to disassemble fittings. You can rotate it freely in tight spaces. When pipe is inserted, it will bite down and grip the pipe for its special design, achieving a perfect sealing effect without leakage.

Most of pre-filters aren't equipped with push-to-connect fittings. Waterdrop helps you save money and time on buying extra components.

Clean & clear water

Do you always find specks of rust or small floating particles in your tap water? This can be a sign that your filters are having a tough time dealing with too much sediment in your water supply.

Our whole-house sediment filter is designed to be your water supply's first line of defense against unwanted particles, sand, rust, or floating objects. Now you can enjoy clear, clean, and sediment-free water for your cleaning and washing tasks.

Maintain strong water pressure levels

Aside from making your tap water look murky, sediment build up in your pipes and water fixtures can reduce your water supply’s flow rate.

This water filter ensures a steady stream of tap water in your household, allowing you to enjoy up to 20 GPM (gallons per minute) of water flow. Install it without worrying about throttling pressure level of your home’s water supply.

No stress maintenance

You don’t have to dismantle all your tubes and pipe fixtures when you need to clean our sediment filter. Once it gets saturated with sediment, all you need to do is apply the innovative backwash function. It is designed to quickly flush out dirt or suspended solids that have been trapped in the filter. Regular flushing will also help extend the lifespan of the filter.

Care for your water-using appliances

Flakes of rust can get into your water supply from corroded pipes. Rainwater may also cause sand and soil to enter your water lines. These particles could clog up valves and fixtures on your water-using appliances, such as dishwashers, washing machines, toilets, and water heaters.

Our sediment filter helps reduce the level of sand grains, soil, rust, and other floating particles that can wreak havoc on your water fixtures and appliances.

Heavy duty construction

Not sure if this spin-down sediment filter will hold up to daily use? You can be assured that it will because it is made of food-grade 316L molybdenum alloy, which delivers stable filtration for tap water.

The sediment filter is housed in a non-BPA, German-made PA12 shell, which has been subjected to rigorous voltage, pressure, explosion, and prolonged water hammer impact tests.

Work great with multi-stage filters

Extend the lifespan and boost the efficiency of your multi-stage filters.

Our sediment filter traps and reduces suspended solids from your water supply, making it an ideal pre-filter to use with your reverse osmosis and ultraviolet water purifiers.

This whole house sediment filter takes just a few minutes to install and is designed to fit 4 types of water tubes. *NOT FOR 3/4“ garden hose

Product description

The WCB32 whole house filtration system is the ideal "point of entry" filtration system for cleaning up water supplies to a home or business on municipal (city) water. Unlike "point of use" systems (like reverse osmosis systems) that are installed to supply water to a specific faucet, the WCB32 filters your water from the source. This means water from every output in your home or business will have passed through the three filtration stages of the WCB32. So what exactly do these three stages of filtration offer? Used as the first stage of defense on the system, the stage 1 housing holds a 5-micron high-capacity polypropylene sediment filter. This filter removes dirt and other various larger sized particles from the water that can clog the following filters. The second and third stages of the WCB32 house 5-micron CTO coconut shell carbon block filters. Block carbon is more effective than other forms of carbon in that it is finely ground up carbon packed into a solidified block. This means they have a higher density than other types of carbon filters, and are therefore more effective in removing their targeted contaminants. The carbon block filters knock out bad tastes and odors, combine to remove up to 99% of chlorine from the water, and are highly effective on organic chemicals (VOCs) like pesticides, herbicides, and industrial chemicals. If you are on well water or have unusual contaminants in your municipal water supply, you may want to consider the WGB32BM or WGB32B-PB over the WCB32. For removing the common contaminants found in the majority of municipal water supplies however, the WCB32 fits the bill.

• [Protect Your Family and Household Appliance from Sediment, Chlorine, and More] Say goodbye to smelly, bad tasting water! Our system removes up to 99% of chlorine from water as well as sediment, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants. This system is installed at the main water supply line in order to treat all the water in your home.
• [DIY Installation and Maintenance] Refer to our manual and our helpful YouTube videos for easy DIY installation. With a clear housing for the first stage, you can easily tell when to change the filter. The cartridges are individually wrapped to ensure freshness. Please unwrap the cartridges before use.
• [Top-Notch Quality] The first stage high capacity polypropylene sediment filter is able to achieve filtration down to 5 microns. The second and third stage CTO Carbon Block filters are made of high quality coconut shell carbon for maximum filtration efficiency and filter life. Both are tested by an independent third-party to meet NSF/ANSI standards. Both filters have a capacity of 30, 000 gallons of water, enough to supply a family of four with clean water for half a year.
• [Peace of Mind Customer Service] Register online to activate your extended manufacturer and life-time free tech support from U. S. local support team. We stand behind our products and if you encounter any problems with any of our products please reach out to us immediately. We are happy to help!
• [Please Note] Unlike an RO system, this system will NOT reduce Total Dissolved Solids (TDS), and instead keeps healthy minerals in your water. If you are interested in a filter that removes TDS consider our iSpring Reverse Osmosis (RO) systems.

Product features

Frequently Asked Question

A: Yes, a water softener is needed if your source water has a high level of hardness, usually with TDS higher than 700 PPM. Hard water can reduce the lifespan of whole house water filter cartridges. The harder the water, the greater amount of scale buildup occurs, and the sooner the filters get clogged.

This whole house water filter can remove up to 95% of sediment, chlorine, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants that a regular water softener can't, although it does not soften your water. It is recommended that you install this WCB32 series whole house system after your water softener to achieve optimal performance if you have hard water.

Note: Water Softeners and whole house systems usually do not lower the TDS level of the water. An additional Reverse Osmosis system may be necessary for your drinking water. Please consult iSpring professionals prior to purchase if you are unsure of which product will meet your needs.

Product description

The PRO+AQUA PRO-WELL-1E Whole House Well Water Filter System provides unmatched filtration performance for iron, hydrogen sulfide (sulfur rotten egg smell), manganese, zinc, copper, lead, uranium, radium, radionuclides, heavy metals and much more without the need of harmful chemicals or extra expensive equipment and maintenance. The PRO-WELL-1E Whole home water filter system will instantly eliminate odors and iron (red/orange) stains in your bathroom, stains in your laundry, and many other contaminants that are bad for your health. The small footprint of this well water system allows it to fit in many water closets, in basements or next to your water heater. Most older well water systems and iron filter systems such as air injection and dosing pumps consist of either two separate tanks, using a Venturi valve, or having a tank full of harmful chemicals costing more money and expensive maintenance. The advance digital valve of this system allows for a maintenance-free and worry-free operation. The system automatically cleans itself without the need for chemicals. The system traps all the contaminants and then backwashes out into the drain every few days. There is no downtime or tanks to fill with harmful chemicals. The PRO+AQUA PRO-WELL-1E Whole House Well Water Filter System comes complete with everything you need to install. This complete whole home well water filter system includes an Advance digital valve, 1" port stainless steel bypass, 1" port optional yoke, two 1" male adapters, two 18" flex connectors, media pressure tank, filtration media (prefilled) and installation manual. The PRO+AQUA no-hassle worry-free warranty covers you for 5 years and with our lifetime tech support, our live tech reps are ready to assist you if you have any questions for the life of the system.

• PROTECT YOUR HEALTH - This Premium Well Water Whole House Filter instantly fixes iron, hydrogen sulfide (sulfur rotten egg smell), manganese, zinc, copper, lead, uranium, radium, radionuclides, heavy metals. With its 3 Micron rating this well water treatment system also filters sediment, rust, sand and much more.
• COMPLETE WHOLE HOUSE SYSTEM - Everything you need to install this well water iron filter system to your home or as an addition to a water softener or other filtration equipment. This whole house filter system includes: Advance digital valve, 1" port stainless steel bypass, 1" port optional yoke, two 1" male adapters, two 18" flex connectors, media pressure tank, filtration media (prefilled) and installation manual.
• BUILT TOUGH IN THE USA - Designed and Built in California from premium commercial grade parts and made to last. The Professionals Choice in well, sulfur and iron water filtration systems.
• EASY INSTALLATION - Clear step by step instructions included with detailed photos. The advance digital valve is easy to program and sets up in minutes. Set up your new well water filter system in no time.
• 5 YEAR WARRANTY, LIFETIME SUPPORT - Buy with confidence knowing that you are fully covered. Free Shipping And Free Returns, Hassle-Free Warranty. The lifetime support has you covered for the lifetime of the system.

User questions & answers

Question:	Will this handle Iron bacteria as it blocks up most filters I have tried
Answer:	There is a 3 inch lip that sticks out from the back of the seat that slips under the toilet lid to help anchor it in place. I looked at ours and it extends a half inch beyond the back of the lid. Great product but perhaps not the right one for your situation.
Question:	What Media is in the Tank
Answer:	Hi Nancy! I think this should work fine for a 300-lb. person because it sits right on the toilet itself, so the weight would be absorbed by the structure of the toilet. I have not used it for this size person, but I think it would be supportive. I seem to remember it had a weight limit on the ad for it on the internet, but if not, there is certainly a company you could call to be sure. I was very happy with this toilet seat after my back surgery! I disagree with the person who said it is "tiny;" I thought it was plenty wide! Hope this helps. Ellen
Question:	Is this considered an Ozone filtration system
Answer:	Handles are easy to remove. But, they need to be attached to help you on and off toilet. And they do stabilize the seat. I recommend leaving them on. I have had this toilet seat for over two years .
Question:	Tech support? Tried multiple times to reach you but no response. How about an 800 number
Answer:	About 4". Another description: http://www.maddak.com/extra-wide-tallette-elevated-toilet-seat-with-steel-legs-p-27859.html

Product features

Quick and easy install

No more worries about incompatible connections. This unit includes male and female adapters to get you up and running as quickly as possible. Our included manual and support channels ensure a complete and hassle free installation.

Secure and durable construction

Our tanks are built to last. The seamless one-piece tank liner and fiberglass shell offer a leak-proof design. An added outer layer of high strength epoxy resin to the tank ensures that it can withstand the harshest of environments.

Maintenance free design

The most advanced digital valve in the market. Our auto clean system eliminates the need to manually clean the unit of contaminants and draining. No more need for cleaning with harmful chemicals and no system downtime.

• The iFilters LWH-D Dual Stage Whole House Water Filter System (Light Whole House Series) reduces and filters sediment, dirt, sand, silt, rust, scale particles, chlorine taste and odor and has a flow rate of 3 gallons per minute (gpm).
• By filtering all water as it enters your home, you are prolonging the life of all major appliances that use water such as water heaters, dish washers and laundry machines. In addition, they provide great preventive maintenance by protecting sensitive valves and seals within your plumbing system.
• This Dual Stage Whole House Water Filter System can be installed at the point of entry line to your home or at the point of use next to your washing machine, water heater, or under your kitchen sink.
• 3/4" Female NPT Ports with Pressure Relief button on cap for easy filter change outs. 5-micron rated filtration. High quality Polypropylene Sediment filter and premium Coconut Shell granular activated carbon. Average cartridge life: 6 months (incoming water quality may affect cartridge life). Flow Rate: 3 gpm/11.4 lpm. Replacement Premium high performing filter: IF-P117 & SG5-2510.
• Designed and assembled in California and built from NSF Approved Components. Included: Premium Mounting Bracket. Housing Wrench. Stainless Steel Mounting Screws, OEM Filters IF-P117 & SG5-2510. Search ASIN 'B07FL3N2WP' for replacement filters.

User questions & answers

Question:	Can this product be used on the hot water side of a sink
Answer:	This unit it designed for incoming cold water provided by your city water tap or your water well. It can NOT be used on hot water pipes however, it can be installed on the cold water pipe entering your hot water heater. If your hot water heater contains rust, minerals, or sediment and your water is dirty, I would suggest flushing it, or even replacing it if needed.
Question:	Does this unit remove rotten egg smell
Answer:	It does if you change filters regularly... Sulfur is the rotten egg smell, check the magnesium rod in your hot water heater, that can make the water stink.
Question:	Can this be hooked up to a dedicated filter faucet
Answer:	Yes, this system can be installed at the point of use. You can install it under your kitchen sink for your main faucet or a separate dedicated faucet. You will simply need to purchase adapter fittings for your faucet hose size (eg. 1/2"), the ports on this system are 3/4" female threads. Hope this helps.
Question:	I have a space issue. Can this be installed upside down or sideways if I don't care about the water mess when changing filters
Answer:	It is recommended to install this system upright as this will allow the filters to sit properly when installing. We don't recommend installing sideways as the filters will not be properly installed and you will have bypass. Installing this system upside down will have the same footprint as installing upright but, if needed, this will allow the filters to sit centered when installing.

Product features

Perfect for City Water or Well Water

The LWH-D OEM replacement filters are affordable and the system requires little maintenance.By filtering all water as it enters your home, you are prolonging the life of all major appliances that use water such as water heaters, dish washers, and laundry machines. In addition, they provide great preventive maintenance by protecting sensitive valves and seals within your plumbing system.

The iFilters Dual Stage Whole House Water Filter System can be installed at the point of entry line to your home or at the point of use next to your washing machine, water heater, or under your kitchen sink.

Included:

• Stage 1 Sediment Filter SG5-2510.
• Stage 2 Carbon Filter IF-P117.
• Clear Housings.
• Premium Mounting Bracket.
• Housing Wrench.
• Stainless Steel Mounting Screws.

Trusted by thousands worldwide. Nature provides the water, we supply the purity!

Only use original OEM tested filters. Using alternative filters will reduce performance and not filter properly.

Fully Featured System:

Specifications:

• Designed in California.
• 3/4" Female NPT Ports.
• Convenient built in Pressure Relief buttons.
• 5-micron rated filtration.
• High quality Polypropylene Sediment filter and premium Coconut Shell granular activated carbon.
• Average cartridge life: 6 months (incoming water quality may affect cartridge life).
• Disposable filter cartridges simplify system maintenance.
• Flow Rate: 3 gpm/11.4 lpm.
• Replacement Premium high performing filter: IF-P117 & SG5-2510.

Easy View Clear Housings:

• The clear housings allow easy viewing of the cartridge performance.
• Stage one offers superior sediment filtration.
• Stage two offers superior chlorine taste & odor filtration.

Built-in Pressure Relief button:

• Built-in Pressure Relief button allows easy removal of filters.
• 3/4" NPT (Standard Threaded) Ports for a universal installation to any home.

Also Included:

• Corrosion resistant Stainless Steal screws.
• Perfect fit and corrosion resistant housing wrench.

City or Well Water:

• 5 Microns
• 100% Polypropylene
• High Dirt holding Capacity
• 50% More Filtration Surface Area
• Fast Flow 3 GPM
• Compact 2 Stage Design
• High GAC Filtration Capacity
• 100% NSF Coconut Shell Carbon

Product description

Whole house water filter systems are great solutions to help protect your pipes and appliances as well as offer you great tasting drinking water from anywhere in the home. The 3M Aqua-Pure AP900 Series Whole House Sanitary Quick Change Water Filter Systems are the industry's first Sanitary Quick Change (SQC) whole house system. The AP903 contains filter media that helps reduce sediment, chlorine taste and odor.* It improves water quality and taste while supplying cleaner, clearer water to every water source point in the house. These systems are referred to as point-of-entry (POE) systems and are installed downstream from the water meter or well pump. These systems help protect plumbing and fixtures while reducing unpleasant taste and odor. Maintenance of a whole-house water filter system is as simple as replacing a light bulb with a simple quarter turn of the 3M Aqua-Pure AP917HD Replacement Water Filter Cartridge or placing a service call with your local plumbing professional. 1" stainless steel inlet and outlet connections provide easy installation for a plumbing professional and peak flow rates up to 20 gpm to meet the needs of residential applications. The innovative Sanitary Quick Change (SQC) design, an industry first for this application, allows for fast and easy cartridge change-outs without having to contact the filter media or the need for a filter wrench. The AP903 is manufactured with a head assembly that includes an integral mounting bracket. The 304 stainless steel head can be installed on existing copper pipes in the home. It consists of a corrosion resistant material that provides long service life. The stainless steel head comes with a 25 year limited warranty. * Tested and verified by manufacturer's laboratory. ** Replace every 12 months, at 100,000 gallons of use, or sooner if a noticeable reduction in flow occurs.

• CLEARLY GREAT WATER: This whole house water filter reduces sediment as well as chlorine taste and odor*
• EASY TO REPLACE: Sanitary Quick Change (SQC) design allows for fast and easy change-outs of the 3M Aqua-Pure AP917HD Replacement Water Filter Cartridge without having to contact the filter media or the need for a filter wrench
• 100,000 GALLON CAPACITY: Replacement cartridge has an activated carbon filter with nominal heavy duty particulate reduction rating of 5 microns and a 100,000 gallon capacity at high flow rates of 10 gpm and even at intermittent peak flow rates of 20 gpm**
• FLOW RATE: 1” inlet and outlet connections to help a plumbing professional with easy installation and peak flow rates up to 20 gpm to meet the water pressure demands of most homes
• CORROSION RESISTANT: 304 stainless steel head can be installed on existing copper pipes in the home It consists of a corrosion resistant material that provides long service life
• NSF STANDARD 42 CERTIFIED: Tested by one of the world’s most respected independent certification organizations that helps protect the world’s food, water, consumer product and environment.
• IDEAL FOR larger homes and is effective with both chlorinated (municipal) and non-chlorinated (well water) systems.

User questions & answers

Question:	Is this any good against bacteria/fungi/viruses? Want to know for my house in Mexico
Answer:	I'm sorry, I don't know about replacement parts - I only have the entire new ultrasonic mister.Sorry,Gwen
Question:	this says it can filter 100,000 gallons of water, me and my wife only use about 37,000 gallons a year, does it it mean it will last 2+ years
Answer:	just tap water
Question:	If this one will reduce water pressure
Answer:	Hi, I don't really know, But every humidifier I've had suffers if allowed to run dry... This was a gift for someone else so I don't have the instructions or owner's manual.
Question:	Has anyone tried both replacement filters - hd-s vs hd and noticed any difference in water quality? thx
Answer:	Yes it will. Just download the app and enjoy!

Product features

Sanitary Quick Change (SQC)

Helps provide easier and cleaner cartridge change-out without having to contact the filter media or the need for a filter wrench.

Better Quality Water

Up to 85% chlorine taste and odor reduction using carbon block technology

Appliance Protection

Helps extend the life of water-using appliances such as water heaters, dishwashers and clothes washers

Easy

STEP 1: Ensure unit is not under pressure, then pull latch upwards to release cartridge.

Clean

STEP 2: Turn cartridge to the left. STEP 3: Pull cartridge down from the stainless steel head.

Done

STEP 4: With label facing left, insert new replacement cartridge into stainless steel head. STEP 5: Turn cartridge to the right. STEP 6: Make sure latch is locked back into place. STEP 7: Flush the filter in accordance with the directions in the installation and use instructions.

Product description

Enjoy unlimited ultra-fresh, clean, great tasting water right at home for the best quality water for cooking and making delicious coffee, ice. Save money, time, and hassle of buying costly, bottled water and live healthier with ultra-safe water that is contaminant free. The ROES-50 reverse osmosis system has been tested and certified to the highest standard in the industry- WQA gold seal to deliver the highest quality clean, filtered drinking water at an affordable price. This complete 5-stage water filter system is made from high caliber components to offer exceptional contaminant rejection rates and long-lasting, reliable performance. Designed engineered and assemble in the USA by leading reverse osmosis manufacturer APEC Water Systems, the ROES-50 is an affordable workhorse with a proven lineage of success in water filtration. to remove up to 99% of all contaminants, such as chlorine, taste, odor, toxic fluoride, arsenic, lead, and chromium. This efficient and productive or system will provide your family with trouble-free, high quality drinking water for many years to come.

• Supreme quality - designed, engineered, and assembled in USA to guarantee water safety & your health.
• Only technology to remove up to 99% of contaminants such as chlorine, taste, odor, VOCs, as well as toxic fluoride, arsenic, lead, nitrates, heavy metals and 1000+ contaminants. Max Total Dissolved Solids - 2000 ppm. Feed Water Pressure 40-85 psi
• WQA Certified System. Premium long-lasting filters used to treat tap water, well water. Provide unlimited clean, refreshing crisp tasting water superior to bottled water
• America's No.1 rated water filter brand with 20 years of success guaranteeing trouble free, noise-free system for long lasting, dependable, pure drinking water.
• System comes with 100% lead-free designer faucet, plus Certified JG Food grade tubing and parts to provide safe, contamination-free pure water.Pipe Size: 1/4 inches
• 2 year extended manufacturer warranty with registration. System comes with all parts and industry's best instructions and videos for an easy DIY experience.
• High quality leak-free quick connect fittings require no extra lock clips to seal leak, and does not rely on water leak detector to protect your home like other brands.

User questions & answers

Question:	How big is the system? How much space do we need in the under-sink cabinet
Answer:	tank is 15x11 and filters are 15x17 I have mine mounted on wall in garage. takes up a lot of space for under the sink
Question:	How much does a single set of stage 1-3 filters cost? Where can we purchase them
Answer:	$32.30 for one whole set or $50.00 for 2 sets.https://www.amazon.com/APEC-Water-FILTER-SET-ES-Standard-Pre-Filter/dp/B00I11HUGW/ref=sr_1_1?srs=9433327011&ie=UTF8&qid=1470691669&sr=8-1&keywords=apec+filter-set-eshttps://www.amazon.com/APEC-Water-Systems-FILTER-SET-ESX2-Replacement/dp/B00SSA7OBM/ref=sr_1_2?srs=9433327011&ie=UTF8&qid=1470691669&sr=8-2&keywords=apec+filter-set-es
Question:	Does this filter remove hormones
Answer:	The answer "ROES-50 system uses a high quality, .0001 micron Reverse Osmosis membrane and 3 carbon filters so it is designed to remove high levels of hormones and pharmaceutical drugs from water" is troublesome. Terms like "high quality" and "high levels" are arbitrary, and it's a safe bet people don't want arbitrary amounts of contaminants removed.
Question:	Hi apec, i see your offshore imitator is offering transparent 1st stage filter housings, why don't you offer one as well
Answer:	I bought the ROES-50 RO system in January 2016 and for the most part it has been great. Bought the pump to go with it as well as an auxiliary accumulator tank to use in addition to the smaller bladder tank that comes with the system so we can draw a couple of gallons of RO water at near full pressure at one go (set to 60 psi), and have the output plumbed to the sink faucet and two refrigerators with ice makers and water dispensers. I say all of this to say that I change the filters quite a bit and that it would be nice to be able to see the condition of the filters without having to shut off the supply from the house plumbing, and shut off both of the pressure tank valves as well as the system backfeed valve I installed just to get a look at the filters. I have a well and have two of the "dreaded" clear Whirlpool whole home water filter units, one at point of entry before the well bladder tank, and one after my water softener system and before my UV sterilizer, both of which have been in service for 18 years without issue. Everything is installed in my utility room on the wall for easy access, and I replace the O-rings in the filter housings about every third filter change and wash the housings out with a bleach solution, rinse them well and lubricate the O-rings with silicone grease when installing new filters every time I change a filter, and never ever tighten any of them tighter than hand tight unless there is a drip, but I can't recall there ever being one. I don't understand why people have filter housings break unless they are being over tightened, installed in a harsh environment exposed to the elements, or somewhere where they are subject to being hit with things and getting damaged physically, or in direct sunlight and subjected to UV radiation. Therefore I wish there was an option to purchase clear housings for the ROES-50 filters in order to make proper maintenance as easy as the rest of my system, because other than that, the only complaint I have with the ROES-50 is that the white bladder tank that came with it leaks air and I have to repressurize it about every six months. The larger blue auxiliary tank I bought has yet to need to be repressurized.

Product features

Super Efficient APEC Carbon Blocks

Our double carbon blocks are uniquely designed in achieving the maximum possible chlorine & chemicals removal in drinking water. The extremely large carbon block surface maximizes contact time to assured water purity and multiplies lifetime of filters and membranes.

True Leak-Free Fittings Protection

Our high quality fittings come with stainless steel teeth for a guaranteed grip, and special o-ring provides a leak-proof seal. No extra clipping parts and leak detector needed. For your peace of mind.

Superb Taste & Water Purity

APEC's premium quality products result in excellent refreshing taste and water purity that is more distinctive than any other brands.

Easy Installation and Maintenance

Easily DIY your RO system by following step by step online installation videos and detailed instruction manual. Just set it and forget it.