3 best flouride filters
Fluoride filters are devices designed to remove or reduce the presence of fluoride in drinking water. Fluoride is a naturally occurring mineral that is often added to municipal water supplies to help prevent tooth decay. While fluoride can be beneficial for dental health, some people may prefer to reduce their fluoride intake, either due to health concerns or personal preferences. Here are some key points about fluoride filters:
Filtration Method: Fluoride filters typically use various filtration methods to remove fluoride ions from water. One common method is activated alumina, which has a high affinity for fluoride and can effectively adsorb it from the water.
Types of Filters: Fluoride filters can come in different forms, including under-sink filters, countertop filters, and whole-house filtration systems. The choice of filter depends on the specific needs and preferences of the user.
Compatibility: Some water filtration systems are designed to remove multiple contaminants, including fluoride, while others are specialized fluoride filters. It's essential to choose a filter that suits your water quality and purification goals.
Effectiveness: The effectiveness of fluoride filters can vary, so it's crucial to select a filter that is certified to meet your specific water quality standards. Certification from organizations like NSF International can provide assurance of a filter's performance.
Maintenance: Like any water filtration system, fluoride filters require periodic maintenance. This may involve replacing filter cartridges or other components, depending on the type of filter used.
Benefits: The primary benefit of fluoride filters is that they allow individuals or households to control their fluoride intake while still enjoying the benefits of filtered, clean water. Some people are more susceptible to fluoride-related health concerns, such as dental fluorosis or excessive fluoride exposure, and fluoride filters can help address these concerns.
Installation: Depending on the type of fluoride filter, installation may require plumbing knowledge.Under-sink filters, for example, are typically installed beneath the kitchen sink and connected to the water supply line.
Cost: The cost of fluoride filters can vary widely based on the type and brand of the filter. It's important to consider not only the initial purchase price but also ongoing maintenance costs.
In summary, fluoride filters are water filtration devices designed to reduce or eliminate fluoride content in drinking water. They come in various types and use different filtration methods to achieve this goal. The choice of a fluoride filter depends on individual preferences and water quality concerns, and users should ensure they select a certified filter that meets their specific needs.
Below you can find our editor's choice of the best flouride filters on the marketProduct description
The PF-2 is for use with Black Berkey Purifiers - If you use ceramic filters, you will need the PF-4 *** PF-2 reduction elements are designed for use in conjunction with Black Berkey water purification elements to adsorb the following unwanted elements found in drinking water. Fluoride, Arsenic V and pre oxidized Arsenic III, Other residual heavy metal ions. FLUORIDE: Testing for fluoride was based on 20-30ppm of the ion in the influent aqueous solution at a flow rate of no more than 3 gpm per cubic foot of media. Results of < 1ppm of the fluoride ion in the effluent were typical for the media (95% reduction). Under optimum conditions, effluent concentrations of less than 50 ppb were readily achieved (99.75% reduction). ARSENIC: This product uniquely targets the entire family of arsenic oxide anions as well as the arsenic cations. REPLACEMENT: Under normal conditions it is recommended that each set of two PF-2 elements be replaced after 1,000 gallons.
From the Manufacturer
The PF-2 is for use with Black Berkey Purifiers - If you use ceramic filters, you will need the PF-4 *** PF-2 reduction elements are designed for use in conjunction with Black Berkey water purification elements to adsorb the following unwanted elements found in drinking water. Fluoride, Arsenic V and pre oxidized Arsenic III, Other residual heavy metal ions. FLUORIDE: Testing for fluoride was based on 20-30ppm of the ion in the influent aqueous solution at a flow rate of no more than 3 gpm per cubic foot of media. Results of < 1ppm of the fluoride ion in the effluent were typical for the media (>95% reduction). Under optimum conditions, effluent concentrations of less than 50 ppb were readily achieved (>99.75% reduction). ARSENIC: This product uniquely targets the entire family of arsenic oxide anions as well as the arsenic cations. REPLACEMENT: Under normal conditions it is recommended that each set of two PF-2 elements be replaced after 1,000 gallons.
- The PF-2 is for use with Black Berkey Purifiers - If you use ceramic filters, you will need the PF-4
- Primarily Filters Fluoride and Arsenic
- Attaches to the bottom of a Black Berkey Purifier - Used as a Post-Filter
- For use with Big Berkey, Travel Berkey, Berkey Light, Royal Berkey, Imperial Berkey, Crown Berkey
User questions & answers
Question: | Are the flouride filter issues still present - oily film on water, white residual substance and leak from the top? Thanks |
Answer: | I will pass your message to the manufacturer so we can fix the instructions. Thanks for the feedback. Both, the strips and drops are for you to test the pH of any liquid. I recommend the drops for testing water and strips for any other liquid. To use the drops just pour 1 oz of water and then add 6-10 drops of the pH reagent. Compare the color to the label of the drops to get an estimate of the pH. For the strips you can just put it on any liquid and then compare the color to the label of strips (not to the label of the drops they are similar but not the same) Also you can use the strips to test the pH of your body you can put it on your mouth or pour some urine and compare to the color of box where the strips came. Remeber we are always looking for a slightly Alkaline pH. I'm already working on an update instructions guide to share with our customers in North America. |
Question: | Are you an authorized Berky dealer |
Answer: | Yes it should work, in fact, because reverse osmosis is already filtering the water the Alkanatur filter should last longer. It will remove whatever the reverse osmosis couldnt and it will add magnesium to the water. So it should definitely work! |
Question: | Will these shower filters fit with your massaging shower head? Will they fit with any other massaging shower head |
Answer: | Yes it does, one of the main components of the filter is the activated coconut charcoal that has a diameter of ~2 nanometers, the average of the industry is around 4-5 nanometers. This allows the filter to capture and remove up to 99% of the particles in water including microplastics. |
Question: | Howoften should both the black filters and white filters be replaced |
Answer: | Hey this is a great question! The best water that you should be drinking is an alkaline water rich in Calcium and Magnesium and low in Sodium, since the latter eliminates the Calcium from the organism and the Magnesium helps to fix it in the areas where it is most needed (our filters do not add Sodium) The filters of conventional jugs on the market carry a chemical called Ion Exchange Resin. What these resins do is change ions of Calcium and Magnesium for Sodium Ions, leaving a water with an acidic pH, with little oxygen and without antioxidant capacity, which as mentioned by the multiple recent studies, increases the probability to form stones in the kidney or gallbladder, in addition to many problems associated with the intake of sodium (diabetes, cancer, cardiovascular problems, fluid retention, kidney problems, etc) Most of the waters are very rich in Calcium, but poor in Magnesium hence, not enough Calcium attaches to your body. The Alkanatur filter is 100% natural, does not contain any type of chemical and the only thing that contributes to water is 18 milligrams of Magnesium per liter, so the two most important minerals that our body needs are in perfect balance, helping to better assimilate them. Because of this in some cases in areas where Calcium is high in water there could remain some whitish particles in the walls of the pitcher or in the bottles. These are simply small remnants of Calcium and Magnesium. We advise you that at night when you notice that they are forming, leave that area covered with water and pour a little vinegar or lemon, in just one hour it will be totally clean. In case it is very embedded because you never performed this procedure, we advise you to use hot water. If in addition to the appearance of particles, the taste is not to your liking, you can use some system of reverse osmosis or mineral water and then pass it through the Alkanatur filter to make it alkaline, restructured, rich in oxygen and with great antioxidant capacity. In these conditions the filter will have a longer duration (we havent heard of cases that need to do this, but we are leaving this option here). I hope I've helped. We are here for whatever you need. From Alkanatur, our main objective is to generate quality water. |
- Excellent reduction performance: Uses natural coconut activated carbon block and food-grade fluoride reducer as filtration media, ensuring excellent reduction performance that will not leach contaminants back into your water.
- High-efficiency filtration: Efficiently reduces chlorine, fluoride, heavy metals, taste and odor, sediments, large particles and other contaminants. Clean and healthy water can be enjoyed outdoors at any time.
- Long-lasting service life: To achieve optimum performance, we recommend you replace the BB9-2 filter every 6,000 gallons per pair and replace PF-2 every 1,000 gallons per pair, which will vary based on water conditions. The package includes two black filters, two white filters and two priming buttons.
- Risk-free purchase: Our professional support team is 24 hour available, if you have any issue about the product, please contact and get solutions right now.
- Compatible models: A good match for the original brand of BB9-2 black purification elements and PF-2 fluoride replacement filter. Interchangeable with the Travel, Light, Big, Royal, Imperial and Crown series. The manufacturer’s name has been used for reference purposes only. AQUACREST is an independent brand.
User questions & answers
Question: | Has anyone tried the red food dye test on these filters? That's the test that we are supposed to do every 6 months with the real filters |
Answer: | from the manufacturer info on this page: "Our filter cannot obviously lower TDS value because it uses natural coconut shell” and “AQUACREST filter uses advanced filtration media, to remove chlorine, sand, rust, sediment and bad taste in your tap water,” and “Good Match Delicate design to fit the original brand. Easy for installation and operation, no tools required.” There is NO claim that this filters out heavy metals nor ANY organisms. It just claims to fit the Berkey and take out sediment and bad taste. If you are using your Berkey as a glam counter accessory or to take out sand or chlorine, go ahead and use this filter. If you are using your Berkey to protect your health because you have a poor water source, you’d be crazy to risk using a cosmetically similar-shaped filter! Berkey is a water PURIFIER, not just a filter. |
Question: | Will these fit a Berkey |
Answer: | Yes, works with mine |
Question: | How long will these Last? at least 3 years |
Answer: | 6000 gallons for 2 filters. So it depends on how much you use, but I think much longer than 3 years for an average household. |
Question: | In terms of filtration how does this compare to the original berkey filters? will this remove pfas |
Answer: | from the manufacturer info on this page: "Our filter cannot obviously lower TDS value because it uses natural coconut shell” and “AQUACREST filter uses advanced filtration media, to remove chlorine, sand, rust, sediment and bad taste in your tap water,” and “Good Match Delicate design to fit the original brand. Easy for installation and operation, no tools required.” There is NO claim that this filters out heavy metals nor ANY organisms. It just claims to fit the Berkey and take out sediment and bad taste. If you are using your Berkey as a glam counter accessory or to take out sand or chlorine, go ahead and use this filter. If you are using your Berkey to protect your health because you have a poor water source, you’d be crazy to risk using a cosmetically similar-shaped filter! Berkey is a water PURIFIER, not just a filter. |
Product features
AQUACREST 7990 Replacement Water Filter
Black Replacement Filters (BB9-2) & Fluoride Filter Combo Pack (PF-2)
Interchangeable with Travel, Big, Royal, Imperial and Crown Series and Gravity filter system.
Please note this is a compatible spare part. This filter is not sourced by or sponsored by Berkey. The manufacturer’s name has been used for reference purposes only. AQUACREST is an independent brand.
High-efficiency filtration
Efficiently reduces contaminants like chlorine, heavy metals, taste and odor, sediment, large particles and so on.
Natural food-grade filtration material
Employs natural coconut activated carbon block, granular activated carbon and activated alumina as the filter media to ensure excellent reduction performance and better taste.
Affordable and effective
The supply is reasonable without compromising quality. Each person can save a large amount of money as well as enjoy clean and refreshing water.
- High-efficiency filtration: It can protect you from harmful spring and well water by effectively reducing fluoride and arsenic.
- Safe material: This filter uses granular activated carbon and activated alumina to improve the water taste and to ensure contaminants will not leach back into water.
- Long-lasting service life: To achieve optimum performance, we recommend you replace fluoride filter every 1,000 gallons per pair, which will vary based on water conditions.
- Perfect fit: Compatible with the Gravity Filtration System fluoride/arsenic replacement filter.
- Compatible models: Interchangeable with the Travel, Light, Big, Royal, Imperial and Crown series. This filter is not sourced or sponsored by original brand. The manufacturer’s series name has been used for reference purposes only. AQUACREST is an independent brand.
User questions & answers
Question: | Have these been third party tested? or nsf rated |
Answer: | I haven’t tried my yet. I hope they work out as the another did??? |
Question: | What’s the point of having a water filtration system, cleaning the water only to resupplying it with plastic? How safe is it to introduce plastic |
Answer: | I recycle my kombucha container for water dont use plastic. |
Question: | Help got these to go on the white ceramic filters and the screw is too big :( I was under the impression they would fit . Any way of adapting |
Answer: | They only fit the black filters |
Question: | Does this fit the white Berkey ceramic filter |
Answer: | If by "fit" you mean "replace" - then yes, it fit my Travel Berkey without issues. Hope this helps... |
Product features
AQUACREST Fluoride Replacement Water Filter
Gravity Filtration System Fluoride/Arsenic Replacement Filter
Please note this is a compatible spare part. This filter is not sourced by or sponsored by original brand. The manufacturer’s series name has been used for reference purposes only.
AQUACREST is an independent brand.
High-efficiency filtration
Effectively reduces fluoride and arsenic.
Natural food-grade filtration material
Employs granular activated carbon and activated alumina as the filter media to ensure excellent reduction performance and better taste.
Affordable and effective
Without compromising quality, each person can save a lot as well as enjoy clean and refreshing water.
Latest Reviews
View all
Ladder Towel Rack
- Updated: 06.03.2023
- Read reviews

Halo Swaddle Blankets
- Updated: 18.07.2023
- Read reviews

Redken Blonde Shampoos
- Updated: 28.02.2023
- Read reviews

Water Radios
- Updated: 24.03.2023
- Read reviews

Seed Spreaders
- Updated: 07.07.2023
- Read reviews