8 best window rollers

Product description

These horizontal sliding window roller assemblies are constructed FLAT edge brass wheels and white plastic housings. The minimum size of the mortise pocket required (beneath the sliding panels) is 3/8 in. wide x 3/8" deep x 1-5/16 in. long. These roller assemblies feature brass wheels in a tandem design with steel axles, and they are used by many manufacturers.

• Used to replace damaged or missing roller assemblies on horizontal sliding windows
• 1/2 in. outside diameter of wheel. Overall net outside dimensions of housing are: 1-1/2 in. wide x 1/2 in. deep x 1/2 in. tall
• White housing
• Brass wheels in plastic housing

User questions & answers

Question:	how many wheels per housing? 1 Review states that each housing contains only 1 wheel
Answer:	No the bracket only fits one way. The rollers interfere with the bracket installation (could not be installed/centered). They are poor quality and the company does not stand behind them (no refund). I went to Home Depot and was satisfied (easy install, looked the same, worked w/o sagging, both covered the window, also cheaper).
Question:	What is the thickness (not the diameter) of the wheel, and what is the width of the axle
Answer:	The pleated shades are some type of reinforced paper, but as long as they don't get wet, I think they would work just fine! I plan on using them on my enclosed porch as well (Cleveland area, so we don't get AS cold as Minnesota!), but if the adhesive doesn't work in VERY cold weather, you could easily use a staple gun or similar fastener to attach the shades.
Question:	what is the diameter of the axle
Answer:	Dear Customer, The material of this shades is 100% Non-woven Fabrics, not paper. Hope this can help. Donutse Customer Service Team
Question:	Can I buy the wheels separately? I’m looking for 1/2” wheels that have an attached axle. Do these have attached axles
Answer:	No, they are not see through. If you have the light shining in the room a certain way, you can see shadows from within the room. I use an overhead light and there are no shadows. When I use a smaller lamp, shadows as you walk around appear on the window shades, but they are not see through. I LOVE these window shades!
Question:	What is the maximum center height for the 10 x
Answer:	It involves folding them up, which is fairly simple as they are pleated. After folding you clip them up with the plastic clips that are included. They cannot be folded and clipped higher than halfway.
Question:	Does this come in a 12x12 size
Answer:	My white/darkening shade does not seem to have a white side... both sides seem dark... how can this be adjusted to the white???
Question:	I am buying this for a church. Can I use the church tax free number
Answer:	I would call Amazon customer service
Question:	Can you buy arms I just bought one and it collapsed in bent the bars
Answer:	Dear customer, Thanks for your inquiry. These blinds can not be cut to fit, we offer a variety of sizes for you to choose from. Hope this can help you. Best regards SBARTAR Customer Service Team

Product features

Quictent 10x10 Ez Pop up Canopy Tent

• Size: 10 ft x 10 ft
• Adjustable heights: Height to Top: 8.5' / 8.2' / 7.9' Height to Side6.9' / 6.6' / 6.3'
• Fabric: 420D PU Coating Oxford
• Frame Material: Reinforced powder coated steel frame
• Roller Carry Bag: 300 x 600D oxford
• Item Weights: 44lbs

Waterproof & Anti-UV Fabric

Upgraded Frame comes with upper and lower quick release button on each leg, very easy to folding and adjust height (3 heights available), no pinching of fingers.

Roll up &Down Windows

This canopy tent with 2 sidewalls featured roll up & down mesh windows.

Wheeled Carry Bag

• With roller carry bag for easy travel.

Product description

These dual window rollers are constructed from steel. They come affixed to a nylon housing and include the necessary axle pins. This style roller is used on Tomrays Tyco 77 dual glazed windows.

From the Manufacturer

These dual window rollers are constructed from steel. They come affixed to a nylon housing and include the necessary axle pins. This style roller is used on Tomrays Tyco 77 dual glazed windows.

• Steel rollers
• Nylon housing
• Includes axle pins
• Used on Tomrays Tyco 77 dual glazed windows

Product description

This concave sliding window roller is constructed from steel. It comes affixed to a stamped steel housing. This style roller is used on sliding and showcase windows.

From the Manufacturer

This concave sliding window roller is constructed from steel. It comes affixed to a stamped steel housing. This style roller is used on sliding and showcase windows.

• 9/16 in. steel roller
• Concaved wheel design
• Stamped steel housing
• Used on sliding and showcase windows

User questions & answers

Question:	Is the size actually 1/4 inch wide? My package arrived and does not fit and lists as 5/16 inch
Answer:	That's how I hung ours. Worked fine.

Product description

This sliding door roller features a white nylon housing. It includes 2 concave edged steel rollers that fit on ABC windows. Comes complete with fasteners fr a quick and easy installation.

From the Manufacturer

This sliding door roller features a white nylon housing. It includes 2 flat edged steel rollers that fit on ABC windows. Comes complete with fasteners fr a quick and easy installation.

• White nylon housing
• Flat edge tandem steel rollers
• Fits on ABC Windows
• Easy to install
• 1-15/16 inch hole centers (2-1/4 inch overall length)
• Verify dimensions against line drawing image before ordering

Product description

Install new window or door screen with ease with a Screen Rolling Tool from Prime-Line. The strong and sturdy tool is a must-have for installing the screen fabric and vinyl spline into a screen frame. It is perfect for large and small screen repair jobs and works with most screening materials. With a wooden handle and steel convex and concave roller wheels, this spline roller is highly durable. The metal wheels stand up to abrasion from screen materials, and the smooth wood handle is comfortable and easy to hold. The combination screen spline tool has a 1-5/16" x 3/32" convex steel roller at one end and a 1-5/16" x 3/32" concave steel roller at the other. It is designed to be used with vinyl screen spline sizes from .115” up to .165”. Don’t risk tearing or putting a hole in the screen because you don’t have the right tool. Using the correct size screening tool makes the installation job easy and stress-free.

From the Manufacturer

This screen rolling tool is constructed from steel. It features convex and concave rollers with a wooden handle. This tool is used to install most screening materials and vinyl spline into window screen frame.

• MUST HAVE TOOL – The strong and sturdy screen rolling tool is a must have for replacing window and door screens. It’s extremely economical and adds great value to big and small screen repair jobs. Works with most screening materials.
• DURABLE CONSTRUCTION – With a wooden handle and steel convex and concave roller wheels, the screen spline tool is highly durable. The metal wheels stand up to abrasion from screen materials, and the wood handle is easy to hold.
• EASY TO USE – Installing a screen with this screen roller tool makes the job much easier. This essential tool is comfortable in the hand and the wheels turn smoothly to roll the screen and spline into the frame.
• CONVEX AND CONCAVE ROLLERS – The combination screen rolling tool has a 1-5/16" x 3/32" convex (round edge) steel roller at one end and a 1-5/16" x 3/32" concave (grooved edge) steel roller at the opposite end.
• SPLINE SIZE RANGE – Use this steel roller screening tool to insert vinyl screen spline sizes ranging from .115” in diameter, up to .165” in diameter.
• Steel convex and concave rollers
• Wood Handle

User questions & answers

Question:	Will this tool work on bronze screening
Answer:	It is not powered, just a preamp for microphone
Question:	Can this be used with wooden frames
Answer:	The power supply is built in. It comes with a 3-prong power cord.
Question:	What side is concave? Thanks
Answer:	I don't own an iPad but, you should be able to record mono or stereo to any device from the smart rig
Question:	Can you use this to sew a beach bag
Answer:	It lasts a long time.. I've used mine for probably 6-8 hours and am still using the original battery I put in it new.

Product description

This window regulator roller is designed to match the fit and function of the original roller on specified vehicles, and is engineered for durability and reliable performance.

• Direct replacement - this window regulator roller is designed to match the fit and function of the original tape on specified vehicles
• Restores functionality - reliable replacement for a roller that has failed due to wear
• Durable construction - this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
• Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage

User questions & answers

Question:	Will this work on a talegate window regulator for 1977 k5 blazer
Answer:	Dear customer, the solid white(upgrade version) is double-sided in the same color, I hope it will help you.
Question:	Will this fit a 1998 dodge Dakota
Answer:	No. It is just the shade.
Question:	what are the dimensions of the rollers
Answer:	nNo but there is not really any need to shorten. You can pull it to the desired length you want and it will stay. They are awesome!
Question:	Is this for one side only? Need them for my 77 carmaro
Answer:	Around the back of the blind you can see the clip there is a fin sticking out on the clip. If you push on the fin the blind should come free. I hope this fixes your problem.

Product features

Dorman’s HELP! line has been helping auto repair professionals and vehicle owners for more than 30 years.

Product description

This steel ball center grooved roller comes secure in a nylon constructed housing. Helps to keep your windows more energy efficient. Fits on Krest Windows.

From the Manufacturer

This steel ball center grooved roller comes secure in a nylon constructed housing. Helps to keep your windows more energy efficient. Fits on Krest™ Windows.

• Nylon housing with 7/16in. diameter center-grooved steel roller
• Fits Krest Window
• Keeps windows energy efficient
• Install 2 per window

User questions & answers

Question:	I only need rollers, not plastic housing, can I buy just (4) 7/16” steel roller to place under the window
Answer:	Dear Customer, You can try to use the speed regulator to adjust the spring systerm. Hope this can help. Donutse Customer Service Team

Product description

Install stock roller shades without tools in seconds, using Simple Slide No Tools Roller Shade Brackets by Redi Shade. Peel and stick the brackets to the inside of your window frame, then securely and permanently slide in your stock roller shade. An easy level template is included to assist with placing the brackets level in the window. Removal is just as simple — without the damage of traditional brackets and screws. Command Strips from 3M included. Designed to use with inside mount stock roller shades featuring flat pin/ round pin end caps.

• No Tools installation — install stock roller shades securely and permanently in seconds without any tools or additional hardware
• Three steps to install — peel the liner, stick the brackets inside the window frame and slide in the roller shade
• One step removal — pulldown to remove without the damage of traditional brackets and screws
• Included Guide — optional easy level template included to assist in level shade installation
• 100% Satisfaction Guarantee — we stand behind our products, if you aren’t happy with your bracket let us know so we can make things right

User questions & answers

Question:	Where on Amazon can I find the simple cheap plastic slide roller shade like the one in the video
Answer:	You connect the power wire from the rearview dash cam/backup cam to the wire that comes from the reverse lights and when you put the car in reverse, it will trigger the back up cam and parking monitor. So, to answer your question, yes, it will come on in reverse as long as you connected the proper wires.
Question:	Will they stick to wood
Answer:	No everything is done through the touchscreen also I do not believe that it can be connected to WiFi
Question:	Anyone atill have these up after one year
Answer:	Let a professional do it I paid Bestbuy, but the rear camera would not work and no matter what micro sd card I used it would accept it. I bought the kind it suggested. DO NOT BUY THIS PRODUCT. It was very grainy and it was not HD or clear.
Question:	What size is the round part that sticks onto the window trim? I only have 1/4”-1/2” space to work with on my windows
Answer:	Dear Customer, It will be in stock on next month. Hope this can help. Donutse Customer Service Team

Product features

Simple Slide No Tools Inside Mount Roller Shade Brackets

Simple Slide No Tools Roller Shade Brackets allow you to install roller shades without any tools or additional hardware in seconds.

Peel and stick the brackets into your window frame, then slide in your stock roller shade for a secure and permanent fit. Command Strips from 3M included.

Removing is just as easy — with no damage like traditional brackets and screws.

Simple Slide Roller Brackets come with an optional easy level template.

No Tools — No Time Needed to Install

- Install in seconds with 3 step installation — no tools or additional hardware needed

No Damage Removal

- No Damage One Step Removal — Command Strips from 3M included

Measurement Guide Included

- An optional easy level template to help with installation

Ideal for Any Space

- Great for any room or home — house, condo, townhouse, apartment, dorm

Step 1:

Peel

Step 2:

Stick

Step 3:

Slide