10 best shepherd hardware lazy susans

Product description

The Shepherd Hardware 12-inch Lazy Susan Turntables are designed with a ball bearing raceway and support up to 1000-lbs. These can be used for rotating book racks, serving trays, kitchen storage, etc.

From the Manufacturer

Shepherd Hardware 12-inch Lazy Susan Turntables are designed with a ball bearing raceway and support up to 1000-lbs. These can be used for rotating book racks, serving trays, kitchen storage, etc.

• 1000-lb Load capacity
• 12" Round metal frame
• Ball bearing raceway for smooth rotation
• Zinc coating resists corrosion
• Mounting screws not included

User questions & answers

Question:	Can this be used for a 36 inch diameter turntable? If not then what is the ideal sized bearing that I should buy
Answer:	yes this skateboards is perfect for tricks and it is a complete skateboard pre-assembled well.
Question:	anyone us this as a human turntable? looking to make a 24-36" spinning stand out of it
Answer:	yes , the skatebaords can fit for both kids above 5years old and adults , it is better wear protective gear for kids
Question:	Is it 12" or not? I want to use on something that is 14" in diameter so 12" would be perfect but in "Product Dimensions" it says 0.5"x13.8"x
Answer:	Skateboard with grip tape, this skateboards are professional skateboard for advanced skate , turns and staking is good , if you want turn more flexible , you can loose truck a little ,
Question:	Folks - does this unit come apart when lifted, or are the pieces attached permanently? Considering using it as a swivel base for chair
Answer:	Thank you for your inquiry , our skateboards use ABEC-11 Bearings , high speed and silience

Product features

Shepherd Hardware 9549 12-Inch Lazy Susan, 1000-Lb Load Capacity

The Shepherd Hardware 12-inch Lazy Susan Turntables are designed with a ball bearing raceway and support up to 1000-lbs. These can be used for rotating book racks, serving trays, kitchen storage, etc.

• Zinc-plated for resistance to corrosion
• Load capacity of 1000 pounds
• Twelve-inch round plate
• Ball bearing raceway for smooth rotation
• Mounting screws not included

Product description

Shepherd Bearing 6" Lazy Susan Zinc Plated 500 Lb

• Ball bearing turntable for rotating book racks, business machine stands, serving trays, kitchen
• 500 lbs load limit
• Package Quantity: 1

User questions & answers

Question:	What is the height
Answer:	About 3/8"
Question:	If this is a 6" turntable why are the product dimensions 6x7.2x
Answer:	The 6" refers to the ball bearing ring, the product dimensions should be 7 x 7 with mounting holes in the corners. (its square)
Question:	how does it attach? screws or glue
Answer:	There are screw holes to attach the round top and screw holes to attach the entire lazy susan to a base. I used small screws to attach the top to the hardware and just let it sit on a base - the weight of the stuff on top keeps it from moving while rotating. If you are going to attach the assembly with screws you have to have preplanned access from the underside. I am sure glue would work as well but its a more permanent solution.

Product description

Corrosion-Resistant Galvanized Steel LAZY SUSAN TURNTABLE -- 6" Square Load Capacity: 500 lbs. Turntable Size: 15" to 30" Sold Individually. No hardware included. Screws, nails, fasteners all sold separately. Check out our online store, we offer these Lazy Susan's in 3,4,6,9 and 12 inch sizes. S-5181

• 6in Square Bearing For Lazy Susan
• Capacity 200 LB Up to 500 LB
• Item Package Dimension: 6.0" L x 6.0" W x 0.31" H
• Item Package Weight: 0.56 lb

User questions & answers

Question:	would this work good i like to use it to make a jig saw table top 4'x4' square & 3/4" thick screwed down to 2' x 3/4" round board
Answer:	No, HEX is for 2" / 50mm bars. Go with the Lock-Jaw Elite AXLE collar, which fits 1.9" bars. Available on our Amazon shop in color red. Thank you!
Question:	inch lazy susan. What size hardware do I need
Answer:	I purchased the 2 inch clips not 1 inch for my 2 inch bar that weighs 45 lbs. sorry I can’t answer your question
Question:	does is move around smooth or does it feel cheap? im making a nail polish rack for my wife and want good quality
Answer:	Thank you for your interest! Not at this time but we are always working to expand our line. Please contact us directly at [email protected] and we can let you know when we have 1" plates available.
Question:	I’m making a lazy susan, do i need to add another piece of wood? like have two? so screws come with this
Answer:	I’m pretty sure that they are made in the USA! I got a couple of set for my Powertec equipment and they work great!

Product description

Ball bearing lazy susan turntable by Everbilt, metal.

Product description

The Shepherd Hardware Pneumatic Gate Casters are designed to allow gates and fences to open and close easily. The 8-inch spring-loaded clamp acts as a shock absorber when the caster is rolling over rough or uneven surfaces and boasts a 200-lb load rating.

From the Manufacturer

8-Inch spring loaded pneumatic wheel swivel gate caster has a universal mounting bracket for use on wood or chain link fences.

• 8 inch diameter black air-filled pneumatic rubber tire on steel hub with 360-degree swivel and universal mount
• Universal 3-3/4 inch x 5-1/2 inch mounting plate has 6 elongated 3/8 inch bolt holes and offers 2-1/2 inches of vertical spring travel
• 200-lb load capacity
• Spring-loaded design promotes easy open and close and eliminates gate sag over time and across uneven surfaces
• Oversized air-filled pneumatic tire promotes easy rolling over rough terrain and requires little initial thrust to open or close residential, farm, or commercial gates
• Load capacity, 200-Pound
• Pneumatic wheel provides smoother movement
• Mounting bolts not included

User questions & answers

Question:	Hi - What size mounting bolts do I need for this? I have a 2 inch tubular gate - thanks
Answer:	1/4" to 3/8"
Question:	can you mount this o n a stockade fence
Answer:	I used some 2x4"s for spacers too hold it away from the fence. Mine is a wooden privacy fence. I dont know if thats considered stockade. Also I found I needed two, one on each side but slightly offset from each other. One casted pushed my 10 foot gate out of alignment and worked hard on the hinges. I've had this set up for a couple of years now and they work great. Very satisfied.
Question:	Can a person buy a replacement tube for this tire I have this set up and the tire leaks. Larry Wendt
Answer:	Yes,you can buy a tube and a tire (though hard to find in stock) as I just went through this on my gate. On mine the tire deteriorated very rapidly causing the tube problem. The tire dry rotted and just fell apart after only a year and a half since I bought it new. It is also is a "two" part wheel which has to be separated repair. What's crap about this wheel too is the bearings wore out in about a year and a half also and this was on a gate that gets opened and closed about once a day. I even called about a replacement wheel and they told me that there is none available and I would have to by a whole assembly. To sum it all up, its a very cheap China made tire/wheel and wheel bearings that deteriorate very rapidly for outdoor use on a cattle type of gate which I have it on. Mine also rides on a hard surface so I can't blame it on that it sits in water or mud that would cause it to deteriorate like it did. If I had to do it all over again I'd pass on this set up
Question:	can you lock the swivel feature
Answer:	Don't believe that you can lock it, unless of course you rig up something yourself. This is one the reasons I am going to replace it. The swivel actually makes it cumbersome when operating a larger vehicle size gate, like I have it on. Hopes this helps

Product features

Spring-Loaded Adjustability for Any Terrain

Heavy Duty spring-loaded gate casters adjust with surrounding terrain to maintain gate height throughout the opening and closing cycles. These rotating supports work equally well on level and uneven exterior surfaces such as asphalt, brick, concrete, dirt, grass, gravel and pavers with up to 2-1/2” of spring-loaded vertical travel to smoothly navigate the terrain surrounding the gate.

Versatile Mounting Options

The Heavy Duty mounting plate is designed to mount directly to a wooden gate with lag bolts. The versatile hole pattern also allows for easy mounting to a tubular farm gate along horizontal or vertical gate rails.

9785 General Duty

4” hard rubber swivel wheel with 2-hole universal mounting plate. Features a 125lb capacity and 1-3/4” vertical spring travel.

9798 Heavy Duty

8” pneumatic rubber swivel wheel with 6-hole universal mounting plate. Features a 200lb capacity and 2-1/2” vertical spring travel.

8734 Heavy Duty Flat-Free

8” flat-free foam rubber swivel wheel with 6-hole universal mounting plate and hardware. Features a 220lb capacity and 2-1/2” vertical spring travel.

8735 General Duty

5” hard rubber swivel wheel with 6-hole universal mounting plate. Features a 220lb capacity and 1-3/4” vertical spring travel.

Product description

The umbrella hole ring prevents the patio umbrella from swaying, wobbling, and leaning. It also eliminates scratches and dents on the umbrella pole cause by friction with the patio table. Also includes a solid plastic cap for covering table gaps when the umbrella is not in use.

• Stabilizes, aligns, and protects patio umbrellas
• Reduces friction and prevents scratches and dents on unstable umbrella poles
• Included cap finishes the look of tabletop when umbrella is not in use
• Transparent design compliments any finish and reduces umbrella swaying caused by wind
• 2-Inch Ring Diameter

User questions & answers

Question:	how do you install the patio table umbrella cover protector? i bought one and seems the two sides do not come apart to fit onto the table top
Answer:	Although I have not yet installed this one in the past they twist apart and the wider part goes on too of table other under and you twist together. It's easier if you have someone hold one of them but can be done alone with log arms. Good luck.
Question:	My umbrella has a 2 pole, will it fit in the ring
Answer:	no. the diameter for the ring is measured and stated according to a Lip that extends over the top of the table with a smaller hole in the center that fits into the hole in the center of the table.
Question:	inside diameter
Answer:	Without measuring it...which I would but it's raining...I have a 1/1/2 inch umbrella pole and it definitely secured it more but a 2" pole would fit just as easy plus it's plastic so could stretch more if needed anothe 1/2 inch...hope that helps
Question:	What is the max diameter of the umbrella pole this ring can fit
Answer:	Actual inside Diameter is 1 11/16", It is really made for a 1.5" OD Umbrella pole so that it is not really tight. But up to 1 5/8" should work fine.Thanks

Product features

Flexible Ring Fits Most Patio Tables

Includes 1 ring and 1 stopper.

Looks better than a hole in the middle of a table

Great for enjoying sunny weather while covering patio table gaps.

Reduces annoying table and umbrella wobbles

The ring acts as a buffer and holds the umbrella in place.

Prevents scratches caused by windy weather

The soft plastic ring protects the umbrella pole from contact with the table.

Product description

• Zinc-plated for resistance to corrosion
• Load capacity of 500 pounds
• Six-inch square plate
• Ball bearing raceway for smooth rotation
• Mounting screws not included

User questions & answers

Question:	I need to make several 30" lazy susans for some corner cabinets.....will these work
Answer:	These are very sturdy and easy to work with. We used ours on an OT aid board which was 18" by 24" which kids would sit on and rotate. We have really liked ours and recommend them to anyone who needs a very sturdy device. You will need access to the ball bearing to apply a drop of oil every six months or so or else the can get a little noisy. Hope this helps.
Question:	What is the diameter of the inside circle
Answer:	The diameter of the inner circle is 4 & 5/8".
Question:	Which surface of the turntable is mounted to the piece and which rests on the table
Answer:	The turntable is constructed in such a manner that both surfaces are the same, either side may be mounted flush to either surface. In other words there is not a top or bottom.
Question:	Can this be used for making a diy chair? will it hold 200lbs for several hours in hunting conditions
Answer:	I don't see why it wouldn't work. It has been holding up just fine for our use and we have 300 lbs on it constantly

Product features

Shepherd Hardware 9548 6-Inch Square Lazy Susan Turntable

The Shepherd Hardware 6-inch wide 5/16-inch thick lazy susan turntable bearings are for turntables with a diameter between 15 and 30 inches. The bearings are zinc-plated for corrosion resistance, and have a load capacity of 500 pounds. It has a 6-inch square plate.

Features

• Zinc-plated for resistance to corrosion

• Load capacity of 500 pounds

• Six-inch square plate

• Ball bearing raceway for smooth rotation

• Mounting screws not included

Product description

3", 4" & 6" - 5/16" Thick - Square Bearing

• 4in Square Bearing For Lazy Susan
• Capacity 200 LB Up to 500 LB
• Screws not included

User questions & answers

Question:	How quiet is this
Answer:	Well "quiet" is relative word. There are some sounds as the non greased bearings turn in the tracks. Listen to the sound of a "rain stick" Sort of sounds like that as it is turning. https://www.youtube.com/watch?v=CRrri6bTDCw if you need something near silent, maybe look for ones with nylon bearings. Not as durable , but I think would be near silent. Or spray some white lithium grease into the track. That would reduce the sound level.
Question:	Whats the diameter of inside round rim
Answer:	2-3/16" is the diameter of the hole in the center.
Question:	Will this corrode if used outside? thanks
Answer:	Yes... I believe it would eventually rust/corrode. The top and bottom plates are not galvanized metal. Even if used in a protected location the ball berrings would likely clog up with dust and dirt and not rotate smoothly. Hope this helps!
Question:	How far apart are the mounting holes
Answer:	If you follow this Amazon link: https://www.amazon.com/dp/B07B9QXMR2, you will be able to see a print which will reference all of the mounting holes and additional dimensions. Please let us know if you have additional questions. Thank you.

Product description

Shepherd Hardware Non-Adhesive Vinyl Discs are used sheets of glass to cushion and prevent movement on tables and surface covers. These 3/4" discs are non-adhesive and include 10 in each pack.

From the Manufacturer

Secure glass sheets in place with Shepherd 3/4 in. surface gard round clear vinyl non-adhesive discs. The discs are ideal for glass tables and desk tops to help prevent sliding. The discs are transparent and will blend with furniture surface.

• Durable and non-adhesive, protects surfaces and appliances in home, kitchen, or office
• Great for use with lamps, telephones, kitchen appliances, desks, glass tables, and much more
• Impact resistant to prevent hard surface damage, easy to move and reuse
• Includes 10 transparent 3/4" round non-stick discs
• Non-marring and non-scratching slide resistant pads for all types of surfaces

User questions & answers

Question:	Is this a suction device? I want to keep a planter from moving on a shelf
Answer:	No, it uses the principle of adhesion, the tendency of dissimilar particles or surfaces to cling to one another, not adhesive or suction. The weight of the planter can help with the adhesion to press the dissimilar materials together to resist lateral movement.
Question:	Are the pads flexible
Answer:	To the best of my knowledge they are not very flexible. You can’t bend them easily.
Question:	Bought these to separate glass tops from wood furniture & keep them from sliding around. The package says "not for use on furniture". Safe or not
Answer:	I use these between a flat painted surface and a fitted piece of glass. After some time, the little plastic things stick to the painted surface and would remove the paint if I tried to move them - so, in my opinion, they would probably not be suitable for separating glass from wood furniture. For that purpose, I would try to find ones made of glass - although, nothing may work right over time.
Question:	Are both sides sticky
Answer:	Both sides have a grip, they are not sticky or have adhesive

Product features

Shepherd Hardware 9966 3/4-Inch SurfaceGard Non-Adhesive Round Transparent Bumper Pads

The Shepherd Hardware Non-Adhesive Vinyl Discs are used sheets of glass to cushion and prevent movement on tables and surface covers. These 3/4? discs are non-adhesive and include 10 in each pack.

Features

• Durable and non-adhesive, protects surfaces and appliances in home, kitchen, or office

• Great for use with lamps, telephones, kitchen appliances, desks, glass tables, and much more

• Impact resistant to prevent hard surface damage, easy to move and reuse

• Non-marring and non-scratching slide resistant pads for all types of surfaces

Product description

The Shepherd Hardware 1-inch Feltgard Plus Round Felt Threaded Stem Glides (4-Pack) are designed for use with displays, office equipment and household furniture with threaded sockets. Helps to level furniture on uneven floors. They feature felt bottoms that reduce friction and noise, and they prevent scratching of hardwood and laminate floors. They attach easily with 1/4-inch x 20 x 1-inch threaded stems. Offer superior floor protection with the adjustability of height.

From the Manufacturer

Shepherd 1" heavy duty threaded stem FeltGard glides offer superior floor protection with the adjustability of height.

• Felt allows for discreet scratch-free motion over wood, tile, and laminate floors, but some applications justify attachment methods beyond traditional self-adhesive
• Taupe plastic base with steel threaded stem and heavy duty beige felt underside screws into plastic threaded sockets for customized leveling
• Easy to install - Pre-drill 11/32 inch diameter pilot hole 1 inch into wooden leg to securely position plastic socket before screwing in threaded base
• Not intended for use on angled chair or table legs, but threaded design allows for customized leveling and height adjustment
• Kit Contains 1 inch round taupe plastic and heavy duty beige felt threaded bases + plastic internal threaded inserts - 4 Pack

User questions & answers

Question:	Are there replacement pads available for these? If so ,where
Answer:	I am sorry, but we do not have replacement pads for our glides.
Question:	do these come with the nylon/plastic plug/nut to insert into the leg of a chair and then screw the pad into it
Answer:	Yes, they do. Threaded felt glide screws into included socket for customized leveling. Pre-drill an 11/32" diameter hole into wooden leg to securely position plastic socket.
Question:	What is the diameter of the base and felt
Answer:	felt is 7/8", plastic base is 1"
Question:	what size drill bit needed
Answer:	It is NOT 11/16. I forget the correct size but I ordered a 11/16 bit based on the last comment and it is way too big.

Product features

Shepherd Hardware 9908 1-Inch Felt Gard Threaded Stem Furniture Glides, 1/4-Inch Stem Diameter

The Shepherd Hardware 1-1/2-inch heavy duty threaded stem FeltGard glides for use on displays and household furniture with threaded sockets. Helps to level furniture on uneven floors. They feature felt bottoms that reduce friction and noise, and they prevent scratching of hardwood and laminate floors. They easily atttach with 1/4 in x 1 in Stem. Offer superior floor protection with the adjustability of height.

Features

• Felt allows for discreet scratch-free motion over wood, tile, and laminate floors, but some applications justify attachment methods beyond traditional self-adhesive
• Taupe plastic base with steel threaded stem and heavy duty beige felt underside screws into plastic threaded sockets for customized leveling
• Easy to install - Pre-drill 11/32 inch diameter pilot hole 1 inch into wooden leg to securely position plastic socket before screwing in threaded base
• Not intended for use on angled chair or table legs, but threaded design allows for customized leveling and heigh adjustment
• Kit Contains 1 inch round taupe plastic and heavy duty beige felt threaded bases + plastic internal threaded inserts - 4 Pack