11 best leveling pads

Product description

Lynx Recreational Vehicle Leveling Kit. Modular designed levelers not only configure to fit any leveling function, but they also withstand tremendous weight. To use: simply set them into a pyramid shape to the desired height that the RV needs to be raised and drive onto the stack. The levelers can also be used as a support base for other stabilizing equipment. Use under single and dual wheels, under tandem axles and under jacks. 8-1/2 inch x 8-1/2 inch with 1-1/2 inch thickness to give 1 inch lift. The 10 pack comes in an easy to store nylon bag and weighs less than ten pounds.

• Lynx Recreational Vehicle Leveling Kit, 10/Pack
• Modular designed levelers not only configure to fit any leveling function, but they also withstand tremendous weight
• To use: simply set them into a pyramid shape to the desired height that the RV needs to be raised and drive onto the stack
• The levelers can also be used as a support base for other stabilizing equipment

User questions & answers

Question:	I have a 30,000 lb. motorhome and wonder what is the best product for putting under leveling jacks
Answer:	My Class A motorhome has a GVW of 26,000 pounds and I've used the Lynx leveling blocks and caps under my rear hydraulic leveling jacks, where most of the weight is, without a problem.
Question:	Is this made in USA
Answer:	Yes, they are made in the USA
Question:	This 10 pack results in 3 inches of lift, correct? (Can't find that detail on this Amazon page
Answer:	By the way, the full 4-3-2-1 arrangement will give you about 4.5" of lift. You would need all 20 from 2 sets, and not have enough land to build in the center. To get 4 levels under each wheel, you would have to place all 20 from 2 sets, pulling forward and backward a few times, while you build each stack. We've never needed more than 3 levels.
Question:	How are these for use on dirt/gravel/grass un-level ground (campsite)? I would be using these in campgrounds to drive my 81 VW Vanagon up on
Answer:	These are specifically made for unlevel conditions. The only concern is you have to watch the gravel. You don't want big chunky rocks under these. I had to buy two kits as one wasn't enough. I use them on a 12k Lb tandem axle 38 ft 5th wheel. Takes 3 under each wheel for me just for starters then one under the landing gear and rear stabilizers. That's 16 and gives me 4 more to add to the low side. If the campsite it any more out of level then that I don't want to park there anyhow.

Product features

Lynx Leveler - RV Leveling Blocks

Lynx Levelers provide a safe and easy way to level most vehicles.

10 Year Warranty

The best just got better. Now you can easily register your Lynx Levelers on our website and stay level for longer than ever.

The Original RV Leveling System

Tri-Lynx has been providing RV leveling systems and RV accessories since 1993.

Products Designed With the User in Mind

Lynx Levelers interlock, easily store and come with a tough nylon storage bag.

Made in the USA

All Lynx Levelers are manufactured in America. Look for the Orange... Look for Lynx.

Product description

The Leveling Block Non Slip Pad works well underneath Camco and FasTen brand leveling blocks, other brand leveling blocks, or on its own to help prevent jacks and stabilizers from sinking into soft ground. The flexible material is great for use on uneven surfaces such as gravel, tree roots and rough earth to help create a more even surface. It also helps prevent the leveling blocks from cracking due to uneven stress. Non Slip Pads are UV resistant, weather-proof, and constructed of recycled materials. 2 Pack.

• Helps prevent jacks and stabilizers from sinking into soft ground
• Can be used on uneven surfaces such a gravel, tree roots etc
• Can be used under leveling blocks or jack pads to help prevent cracking
• UV resistant, weather proof
• Constructed of recycled materials

User questions & answers

Question:	Some times I have issues with the plastic levelers sliding while trying to drive up on them. Would these have a better gripping ability
Answer:	Yes, only 2.
Question:	Can anyone tell me how thick these are i am guessen 3/4-1inch but would like to know before i buy them. Thanks for your help
Answer:	These come in a 2 pack. We use them under our stabilizers so we needed 2 packs for a total of 4 pads.
Question:	Is this a set of
Answer:	I'd assume so. We have a 2010 28' Summerland and they hold our jack.
Question:	When you say camco 44600 universal flax pads, how many comes in a package
Answer:	Wildly Use] UNEOA leveling block can be used with single wheels, double wheels, tandem wheels, tongue jacks, 5th wheel jacks, hydraulic jacks and stabilizer jacks.

Product features

Camco 44600 Universal Flex Pads for Leveling Blocks, 8.5” x 8.5”

The flexible material is great for use on uneven surfaces such as gravel, tree roots and rough earth to help create a more even surface. It also helps prevent the leveling blocks from cracking due to uneven stress. Non Slip Pads are UV resistant, weather-proof, and constructed of recycled materials.

Product description

Heavy duty blocks are safe and easy to use. They offer many options for leveling single wheels, dual wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks and tandem axles. Customize your levels: Stack interlocking blocks to desired height. Strong and durable blocks are available in a ten block set and a four block build up set. Patented. Each set comes in a convenient storage bag.

• 10 interlocking blocks stack to the desired height for safe and easy leveling
• Strong and durable construction
• Solid bottom to help keep them from sinking in soft ground
• Includes zippered storage bag with handle
• Each leveling block measures 8.5 inch x 8.5 inch x 1 inch

User questions & answers

Question:	How sturdy are these? i have a class b rv that weighs about 9500 lbs dry (only 4 wheels). i used plastic block levelers from campingworld and they broke in their first use
Answer:	This is my second set of these blocks (because I needed more to level on steep incline) only one of the first ten has failed and that's because i did line it up with the jack. My class A Rv weighs 22000 dry they have served me well for 6 months
Question:	What's the difference between Camco 44512 and 44505 models
Answer:	44505 is our leveling blocks. 44512 is our Fasten Leveling Blocks with T-Handle. You can give us a call at 800-334-2004 if we can be of further assistance. Thanks.
Question:	What is the weight limit for these Camco blocks? For the Camco Trileveler it is only 4000 lbs
Answer:	I've used them used under the wheels of some rather large class A motorhomes. What destroys them is if they start to slide when you drive onto them. You have to orient them like a staircase so that you are not attempting to "climb" more than the thickness of "one block per step". Rough, rocky ground can also damage them. In many situations, you'll need more than just 10 blocks. If you really want to be prepared, get 20, or even 30 blocks (two or three 10-pks.) If you use them under the rear of a motorhome that has duals, you need separate "staircases" of blocks for inner/outer wheels, because the blocks are not wide enough to support both inner and outer wheels on the width of a single block.
Question:	What are the dimensions of each block
Answer:	8 1/2 x 8 1/2 x 1 Warning: The 10 answers you will find here all have one thing in common, none of them had a clue but decided to added a few inches here and there. If you can't scroll down the description to find the dimensions, maybe it's time to put your mouse pad away for the winter.

Product features

Interlocking Leveling Blocks

The Camco Leveling Block 10-pack allows you to stack the interlocking blocks to the desired height for safe and easy leveling. These blocks can be used with single wheels, double wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks and tandem axles.

Camco’s RV Leveling Blocks make it easy to customize your levels. Simply stack the interlocking blocks together to your desired height. They have a strong, durable construction and a solid bottom to help keep them from sinking into the ground.

Engineered with a patented design to optimize both strength and weight, resin is UV stabilized and built to last even when exposed to sunlight for extended periods of time. Bright, visible yellow color helps you see them so you don’t leave them behind. They can also be used to help prevent your stabilizers from sinking in soft ground.

Camco's RV Leveling Blocks measure 8.5 inch x 8.5 inch and can be used with stack jacks, trailer tongues, 5th wheel jacks and swing arm supports. If dirt or debris build up in the leveling blocks, just knock it off and hose it out before storage. Product includes a zippered storage bag with handle to keep them all together when not being used.

Easy to drive on and off

Bright yellow blocks are highly visible

Solid bottom resists sinking

Zippered carrying bag fits all 10 blocks

About Camco Manufacturing

Camco proudly manufactures many of our 4,000+ products in 5 facilities across the United States, including items from flagship brands like RhinoFLEX, TastePURE, TST, Currituck, and FasTen.

Product description

Camco's RV Stabilizing Jack Pads help prevent jacks from sinking into the ground. They are compatible with stack jacks, fifth wheel stabilizers, swing down stabilizers and awning arms. Not intended for use with hydraulic jacks. Each pad features 6. 5 inches x 6. 5 inches of usable surface area. For convenient storage, they interlock and include a handy strap. Constructed of heavy duty, UV stabilized polypropylene. Includes a set of pads. Made in the USA.

• Helps prevent jacks from sinking into soft ground
• Interlocking design and handy storage strap for easy storage
• Built in handle for ease of use
• Measures 6.5" x 9" x 1"
• Set of 4

User questions & answers

Question:	will this fit the scissor stabilizing jacks for a small 21 ft jayco baha
Answer:	Do you mean dimension - or size?
Question:	That's the diminutions of these pads
Answer:	Yes they are big enough to for scissor jack feet. That is what I have on my travel trailer.
Question:	Are these pads big enough for scissor jack feet
Answer:	The description states it supports up to 6000 pounds (3 tons)
Question:	How many pounds will they hold
Answer:	Yes, this same cord but the packaging was updated. Sorry for the confusion, but it is still safe for outdoor use.

Product features

Stabilizer Jack Pad

Camco's RV Stabilizer Jack Pads are used to help prevent jacks from sinking into the ground. Use them with stack jacks, trailer tongues, 5th wheel jacks and swing arm supports. They have a built-in handle and a storage strap is included for easy storage. They are constructed of durable UV stabilized resin for years of use. Their heavy-duty construction and rib design are optimized for increased strength. Be sure to use with flat side down to help prevent slipping and sinking. Contains 4 jack pads.

Product description

Package Include : 12 Pcs Soft Pvc Wedge in a Plastic box



Widely Use : Great for leveling bookcases, tables, doors, windows, plumbing fixtures, cabinets, playhouses, sheds, deck & mailbox posts a breeze

• Size : 2"x1.2"x0.2"
• Material : Soft environmental Pvc environmental
• Widely Use : Great for leveling bookcases, tables, doors, windows, plumbing fixtures, cabinets, playhouses, sheds, deck & mailbox posts a breeze
• Design : Ribbed design helps stabilize and level an uneven toilet or furniture, Use to stabilize and level various objects.
• Warranty : any issue with the product you can feel free to contact us,we will give you replace one or refund in time

User questions & answers

Question:	Can these be easily trimmed with a knife or scissors
Answer:	Although I didn't have to trim any of the shims I think a knife could easily trim them.
Question:	Would these work to level an aquarium stand? Would the weight of the aquarium after water added compress them
Answer:	yes it will work ,it will not compress them
Question:	I’ll be putting these under my bed. Will I still be able to move the bed around a little
Answer:	Hi,you dont need to move you bed ,you can put it under your bed directly. thanks
Question:	Will these last outside
Answer:	I think they would. They are made of a rubbery plastic that appears would hold up outside.

• ✅ FIT - Xtra fits 9” round metal feet on many Class A and 5th Wheels RVs. Please verify size of jacks (9”) before ordering.
• ✅ PERMANENT - SnapPads can be installed in minutes but will stay on forever. Snap them on and rid yourself of all your leveling hassles. Say goodbye to crawling under your rig every time you set up.
• ✅ STABLE - SnapPad increases stability in 3 ways: a larger footprint, more vibration dampening, and by conforming to uneven terrain like gravel. ANTI-SLIP - SnapPads are made from durable rubber that grips any terrain. No more popping jacks or slipping in high winds or on slick surfaces.
• ✅ RUGGED - Our process uses recycled tire crumb, high strength resin, and a 100+ ton press to make SnapPads extremely durable. SnapPads are engineered to be resistant to UV exposure, water, heat, oil, tar, mud, and other environmental hazards. Protects your metal landing feet from damage.
• ✅ ENVIRONMENTALLY FRIENDLY - Made in the USA from recycled American tires. WARRANTY - Two year manufacturers limited warranty.

User questions & answers

Question:	I have 2018 jayco greyhawk 29mv iam wondering if they will fit
Answer:	Depends on what type of jacks you have on the motorhome. If you have the ones that are hydraulic and have a 9inch round pad these snap pads should fit. Caution Wat h you do not get your fingers pinched when the jacks come done to the pad to snap in place
Question:	What if I only need
Answer:	I only need 2. We can split it? LOL
Question:	Is there a reason you’re selling them for $30 more than the manufacturer does
Answer:	The manufacturer cannot make any right now due to COVID, so any reseller that has them is gouging the market. Best bet is to either wait until they can make some more or buy Hush Pads, they aren't attached but they do the same thing.
Question:	Why are these more expensive that snappad website? i thought amazon was suppose to have the best prices? snappad has for $159.95 with free shipping
Answer:	The manufacturer cannot make any right now due to COVID, so any reseller that has them is gouging the market. Best bet is to either wait until they can make some more or buy Hush Pads, they aren't attached but they do the same thing.

Product features

Xtra 6-pack

Ideal for fifth wheels with a six-point leveling system featuring 9” round jacks. Snap on a set of XTRAs to your rig and eliminate all of your leveling hassles. Permanently.

Stability

SnapPad increases stability in 3 ways: a larger footprint, more vibration dampening, and by conforming to uneven terrain like gravel.

Permanent

Installs in seconds. Stays on forever. Say goodbye to crawling under your rig every time you set up.

Protection

SnapPads absorb the daily punishment of the road and elements instead of your metal landing feet. Helps prevent the protective coating from being damaged by gravel, concrete, asphalt and the environment.

Anti Slip

SnapPads are made from durable rubber that grips any terrain. No more popping jacks or slipping in high winds or slick surfaces like ice.

Rugged

Our process uses recycled tire crumb, high strength resin, and a 100+ ton press to make SnapPads extremely durable.

Environmentally Conscious

Made in the USA from recycled American tires. Good for the environment. Good for the country.

Electrical Insulator

May help protect your family and electronics in the event of an electrical surge from a non-direct lightning strike.

Aesthetics

SnapPads looks as good as they work! Complete your RV by giving it some new, fancy shoes.

Product description

The Camco FasTen RV Leveling Blocks allow you to stack the interlocking blocks to the desired height for safe and easy leveling. Each block adds a full inch to stack height. Camco’s FasTen Leveling Blocks can be used with single wheels, double wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks and tandem axles. The convenient carrying handle easily pulls up for carrying, or twists down to secure blocks together for storage. They are made of UV stabilized resin for years for rugged use and their bright yellow color is highly visible for easy leveling. Compatible with Camco Leveling Blocks. Product dimensions: 17” x 8.5” x 1”. Stack height should not exceed 4-1/2 inches.

• Customizable Leveling: 10 interlocking blocks stack to the desired height for customizable leveling; each block adds a full inch to stack height
• Usage: Can be used with single wheels, double wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks and tandem axles
• Carrying Handle: Easily twists to secure blocks together for storage
• Strong and Durable Construction: Resin is UV stabilized for years of rugged use
• Highly Visible: Bright yellow color is highly visible for easy leveling. Compatibility: Compatible with Camco Leveling Blocks. Safe and easy to use: A convenient way to level your vehicle
• NOTE: Camco sells a rubber block to prevent slippage as an upgrade, item 44600 Unversal flex pad

User questions & answers

Question:	Can these be used in colder winter months when I store my camper to keep the tires off the ground
Answer:	Yes, you can use it for that application.
Question:	Can these be used for storing an RV on a grassy side yard in order to keep the tires from sinking
Answer:	Well now the brown ones are $12.66 more than the yellow ones, see what you've done?
Question:	Can these be used in colder winter months when I store my camper to keep the tires off the ground
Answer:	No it has no lights.
Question:	Why are the yellow ones $12.76 more than the brown ones
Answer:	We initially thought the same thing. The motor would run, but the wheels wouldn't turn. It turned out that we really had to push the wheels into the motor hard, they clicked in place, and now it works great.

Product features

FasTen Leveling Blocks

The Camco FasTen Leveling Blocks allow you to stack the interlocking blocks to the desired height for safe and easy leveling. Each block adds a full inch to stack height. Camco’s FasTen Leveling Blocks can be used with single wheels, double wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks and tandem axles. The convenient carrying handle easily pulls up for carrying, or twists down to secure blocks together for storage.

They have a strong, durable construction and are engineered with a patent-pending design to optimize both strength and weight. Resin is UV stabilized and built to last even when exposed to sunlight for extended periods of time. Bright, visible yellow color helps you see them so you don’t leave them behind. They can also be used to help prevent your stabilizers from sinking in soft ground.

Camco's FasTen Leveling Blocks 4x2 measure 17 inch x 8-1/2 inch each and can be used with stack jacks, trailer tongues, 5th wheel jacks and swing arm supports. If dirt or debris build up in the leveling blocks, just knock it off and hose it out before storage. Stack height should not exceed 4-1/2 inches.

Strong, durable construction

engineered with a patent-pending design to optimize both strength and weight.

Convenient twist-on handle

Is easily removed to remove leveling blocks for use.

Pull-up handle

Pulls up to easily carry leveling blocks, or pushes down for storage.

About Camco Manufacturing

Camco proudly manufactures many of our 4,000+ products in 5 facilities across the United States, including items from flagship brands like RhinoFLEX, TastePURE, TST, Currituck, and FasTen.

Product description

Shepherd Hardware Self-Leveling Pads are ideal for angled leg chairs. The thick foam layer allows for superior surface adherence and grips better than other heavy duty felt pads. Corrects uneven wear of 3/8" or less on furniture.

From the Manufacturer

This Shepherd 1" heavy duty self leveling felt pads easily stick to and hold on tightly to table and chair legs. It's thick foam layer allowsfor superior surface adherence and grips better than other heavy duty felt pads.

• Self-leveling and self-adhesive felt pads are easy to install and offer scratch-resistant protection of floors and other surfaces, especially effective for angled or unevenly worn chair legs
• Heavy duty felt pads are composed of an extra dense synthetic blend and pressure-sensitive adhesive with an additional hardening process to ensure rigid long-lasting protection
• Self-leveling felt pads add a thick foam layer for superior surface adherence and overall better grip on angled or unevenly worn legs
• Easy to install - simply clean, peel, and stick - surfaces should be free of dirt & debris and sanded if wooden to ensure a strong bond

User questions & answers

Question:	Are these adhesive stick and do they stay put when put on thanks
Answer:	Each foot can be adjusted up to 3/4 inch in height. When installed minimum height is .50 inch and maximum height is 1.25 inch
Question:	Will these help a bar stool stay in place on tile or will it make them easier to move
Answer:	Hi Dear, Namaste !!Thank you for your message. Kindly note that it can hold 2-3 tablespoons of liquid. It can be a beautiful technique to cure many diseases and also possess amazing healing qualities. With lots of love, peace, smile, blessings and harmony from India. regards, Jatin Pandya - OwnerJet InternationalIndia
Question:	Do you sell felt pads that are even thicker than these
Answer:	They are carved and painted both. Thanks, Jet Team
Question:	can these be stacked
Answer:	We dont recommend; however you are free to use it. Thanks, Jet Team

Product features

Shepherd Hardware 9915 1-Inch Heavy Duty Felt Gard Self-Adhesive Leveling Furniture Pads, Beige,8-Pack

The Shepherd Hardware Self-Leveling Pads are ideal for angled leg chairs. The thick foam layer allows for superior surface adherence. Corrects uneven wear of 3/8-inch or less on furniture.

Features

• Self-leveling felt pads are ideal for angled leg chairs - thick foam layer allows for superior surface adhesion and corrects uneven wear of 3/8 inch or less on chairs and stools
• Heavy Duty felt pads are composed of extra-dense recycled PE blend with an extra hardening process to ensure rigid, long-lasting performance
• Easy to install - Simply clean, peel, and stick
• Surface preparation is key - Surfaces should be free of dirt & debris and sanded if wooden for maximum performance
• 1 inch beige round extra thick 9mm self-leveling felt pads - 8 Pack

• MEASUREMENT：Each leveling block: 8.5 inch x 8.5 inch x 1.3 inch.
• DURABLE CONSTRUCTION：Durable, lightweight, and UV-stabilized blocks are made of high-quality PP material for years of rugged use.
• SMART DESIGN：Interlocking design allows you to easily twist to secure blocks together for storage.The sturdy bottom will greatly keep the wheels from sinking in soft ground.
• EASY STORAGE：Each set comes in a zippered storage bag with a handle for convenient transportation. Conveniently packaged and easily stored in the bag.
• WIDELY USAGE：Perfect for using with single wheels, double wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks, and tandem axles.

User questions & answers

Question:	Can those with stand the weight of a 33' motor home
Answer:	Yes
Question:	How many blocks are in one set
Answer:	dear mary, we have one pack/4 pack/10 pack leveling blocks, you could choose the right quantity according to your need. best wishes.

Product features

RVMATE RV Leveling Block

MEASUREMENT：Each leveling block: 8.5-inch x 8.5-inch x 1.3-inch.

DURABLE CONSTRUCTION：Durable, lightweight, and UV-stabilized blocks are made of high-quality PP material for years of rugged use.

SMART DESIGN：Interlocking design allows you to easily twist to secure blocks together for storage.The sturdy bottom will greatly keep the wheels from sinking in soft ground.

EASY STORAGE：Each set comes in a zippered storage bag with a handle for convenient transportation. Conveniently packaged and easily stored in the bag.

WIDELY USAGE：Perfect for using with single wheels, double wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks, and tandem axles.

HOW TO WORK：Simply stack them into the desired height and shape that the RV/motorhome need to drive onto the leveling blocks.

Product description

Valterra Stackers Leveler/Jack Pads function as a multi-use leveler, jack stand and tongue wheel support. The attached easy grip handle acts as a transition to the next step for a smooth ramp. Stackers can hold up to 40,000 lbs. gross vehicle weight on a firm level ground or 10,000 lbs. per wheel. Each set contains a convenient self-fastening strap for storage. Dimensions: 8" x 10" x 1-1/2".

• Multi use leveler, jack or tongue wheel support
• Attached easy to grip handle acts as a transition to the next step for a smooth ramp
• Convenient self- fastening strap for storage
• Hold up to 40,000 lbs. gross vehicle weight on a firm level ground or 10,000 lbs. per wheel
• Measures 8" x 10" x 1-1/2"

User questions & answers

Question:	What size are they
Answer:	Block dimensions (including handle): 10-1/2" long x 8-1/8" wide x 1-3/8" tall Individual block height when stacked: 5/8" tall

Product description

Specifications:

Package Included: 4 x Adjustable Furniture Feets, 4 x Nuts

Total Size: 81 x 48mm/3.2" x 1.9"(H*D)

Thread size: M12 x 50mm/0.47" x 2"(D*L)



This Glide Leveler is typically used on Workbench, Machine, Cabinet & Heavy Duty Applications. Easy to install of it and adjustable height as your require. Suitable for various purposes ,stops wobbling on uneven floor and reduces vibration.



*Store Introduction & Service：

LICTOP first priority is customer satisfaction.

If you have any questions about the product, please feel free to contact us. We will be the first time to help you solve the problem.



* Note:

Due to manual measurement and production batch is not the same, the size, weight, color, there will be some error, the error is within 5% of the normal case. (Please make sure you don't mind before ordering.)

• Package Included: 4 Pcs Adjustable Furniture Glides with Nuts
• Thread size: M12 x 50mm/0.47" x 2"(D*L).Total Size: 81 x 48mm/3.2" x 1.9"(H*D).
• Material: Reinforced Nylon Base + Hard Rubber round antislip cushion bottom.
• Load Capacity: 180-250 lbs.Suitable for mechanical equipment, shelf, assembly line production, furniture, etc
• These high quality feet leveler will adjust the furniture legs height and leveling uneven legs or when the floor is unlevel or sloping, you can adjust the industrial equipment or furniture to sit level on uneven floors.

User questions & answers

Question:	Thread pitch ? what is the thread pitch m12 x
Answer:	I believe they were M12 x 1.5mm, but i would have to actually measure the thread pitch to verify.
Question:	Can these be used with outdoor furniture
Answer:	Yes,it can
Question:	What is the thread pitch of these bolts? M12x1.75, M12x1.5, or M12x
Answer:	M12x1.75
Question:	Are the bottoms soft rubber? Will they grip the floor (polished concrete
Answer:	Hello, the base rubber of this product is hard ,only a little bit soft