12 best hanging door hardware

• [304 Stainless Steel] - Brand: WINSOON; Condition: 100% Brand New; Material: 304 Stainless Steel; Surface: Stainless Steel, Water Proof, Rust Proof; Door Weight Capacity: 230 lbs; Fit door panel width: 30"; Perfect for door panel thickness: 1 3/8" to 1 3/4"
• [ONE-PIECE Track] - One full 5 FT/60" track is included in the package. Easy to install. Others provide two short 2.5 foot track and then connect them with a track connector, which is structurally less strong, more difficult to install, and requires a track connector.
• [PACKAGE INCLUDE] - 1x5FT Track,4xTrack Support,2xRoller,2xDoor Stopper,2xAnti-Pad,1xDoor Guide,1xInstall Manual;All other necessary hardware is included as you see in the pictures. The track has been predrilled holes for 16 inch stud; ONLY the hardware is for sale, DOOR IS NOT INCLUDED.
• [Easy to Install] - Very detailed and visual instruction. Based on our own installation experience, We write the instruction, it explains every step with words and picture and all data is measured in inches. It is very easy for you to take a reference during the installation.
• [100% MONEY-BACK GUARANTEE] - The barn door hardware comes with 5 year factory warranty. WINSOON is the manufacture of the sliding door hardware. If you are not satisfied with this product, we can provide you the USA return address.And if there is any part missed or defectived during shipping, please let us know, we will send replacement at no charge for the missing or defect parts at the first time.

User questions & answers

Question:	Is there a way to make the twin doors stop in the center
Answer:	The rubber stopper included attached to door top will stop on splice plate. If you hung door low increase length of screw and shim rubber to correct height or replace with similar.
Question:	Can I put two doors on the 16' track and have both doors slide past the connectors
Answer:	The rollers on mine are top mounted and nothing would prevent them from doing what you're suggesting, as long as you had enough space on each side for the doors to fit. There are also other mount and track style options that allow one door to slide in front of the other. That may be better for this situation
Question:	Can I have this cut in 13 ft? Can I move the stopper, so only one of my doors will move
Answer:	We will see if we still have the 13ft instock. It couldn’t be cut by your self. And the stopper can be moved to wherever you want.
Question:	I have a 72" opening. Can I use this hardware with two 36" doors and will i be able to take both doors to either side of the track
Answer:	If your opening is 72'', the 12ft kit will work for you.

Product features

5FT stainless steel barn door hardware kit for single door ( door not inlude )

Pre-purchase Information

Door is not included, only the hardware kit is for sale.

You will need 6" clearance from the top of your door to the ceiling (or crown molding, if any) for this kit to fit correctly.

Fit for door panel thickness: 1-3/8" to 1-3/4".

This hardware kit can hold door weight 230lbs.

The gap between door and cabinet is 7/8" based on 1-1/2" thick door.

To help you choose the fit kit, we recommend the track length shoulde be twice of the doors width at least, and you can also cut the track into any length to meet your need.

Safety-ensuring Measures

Hnager: Upgraded Nylon wheels, each with 2 life time lubricated bearing ensure slide smoothly and quietly. Test beyond 120,000 rolls.You can use it for a long time!

Door Stopper: Prevent your door from rolling off the rail, Anti-collision, the rubber cap ensure a quiet close

Anti-jump Pad: Prevent door be lifted off rail. Install them on the top of your door, the anti-jump pad and the roller can hold the rail once the door hit the stopper.

T Floor Guide

The floor guide can prevent the door from swing, allow you to open and close your door freely.This hidden door guide need you to open a slot on the bottom of your door, suitble for cabinet has bottom trim

More Choice

What hardware is required if I want to install more doors?

You just need to buy an extra set of hangers （ASIN: B07MLZ2P3K) and make sure they are the same as the anger in barn door hardware set.

Warm Tip: If you need other track length, or you have too thin / thick door, please tell us via email, we could customize for you.

Packaging List

• 1 x 5FT Rail
• 4 x Track Support
• 2 x Steel Hanger
• 2 x Door Stopper
• 1 x Door Guide
• 1 x Hex Wrench
• All other necessary hardware is included as you see in the pictures.

ONLY the hardware is for sale, doors are NOT INCLUDED.

Product description

Features:

Zinc alloy material, no rust, durable. Increase the bearing, smooth and silent. High quality nylon discs, wear resistant. Flexible operation, stable quality and long service life. Keep the door balanced to prevent swinging and make sure smooth sliding.

Specifications:

Condition:100% Brand New

Material: Zinc alloy

Color: As shown in the picture

Size: Approx.120*15mm/4.7*0.6in

Package List:

2 * Roller

• 2 pieces door wheels is made of zinc alloy material, no rust, durable. Easy to install and use.
• Increase the bearing, smooth and silent. High quality nylon discs, wear resistant.
• Helps the door to maintain balance, prevent the swing and ensure smooth sliding.
• Flexible operation, stable quality and long service life.
• Keep the door balanced to prevent swinging and make sure smooth sliding. Move the door to save your space, decorate and beautify your home.

Product description

"Description

Specification

Color:Silver

Materia:high quality steel

Size:

Approximate size:

length 10.9cm

width 4cm

height 12cm



Features

1.Suitable for door thickness 35-45mm (specially provide 2 kinds of screws)

2.Suitable for barn doors, interior doors, kitchen doors, hardware American sliding doors, sliding doors, etc.

3.Can bear 90kg



Package included:

1 x Steel Double Wheel Rail Hanging Trolley "

• 1.Suitable for door thickness 35-45mm (specially provide 2 kinds of screws)
• 2.Suitable for barn doors, interior doors, kitchen doors, hardware American sliding doors, sliding doors, etc.
• 3.Can bear 90kg

User questions & answers

Question:	Does this fit the Box Rail or the Unistrut
Answer:	Used with box rail

• WHY CHOOSE US: With 1/3 of the market price, you can get the same quality products here! premium quality hardware kit are provided along with a completely turnkey experience.
• SIMPLE AND EASY TO INSTALL: Professional instruction and customer service team help you solve all installation problems in time. Save the cost of finding a Carpenter or decoration team.
• PACKAGE INCLUDED: A Barn Door Hardware Kit (1x 6FT Rail, 5x Rail Spacers, 2x Rollers, 2x Door Stops,2x End Caps,1x Floor Guide,1x Hex Key;All other necessary hardware is included as you see in the pictures. For 16 inch stud.) DOOR NOT INCLUDED.
• DOOR WEIGHT CAPACITY: 220 lb, Fit door panel width: 36", Fit door panel thickness: 1 3/8" to 1 3/4".
• THE BEST CHOICE FOR YOUR HOUSE: This modern twist on the classic barn door not only saves space, it allows the ability to open up multiple rooms without the annoyance of a swinging door.

User questions & answers

Question:	how thick can door be
Answer:	Door panel thickness: 1 3/8'' and 1 3/4'' .
Question:	Does the hardware package include two hangars like the picture, or do the hangars need purchased separately for the
Answer:	The hardware package include two hangers. If you want to add another door to the track, you could purchase additional 2 hangers. Thank you very much for asking!
Question:	are the ones being shipped now the ones with the 16 inch holes drilled or are they still the
Answer:	Right now the rail is of 17 3/4", 16" ones will be available in a month.
Question:	What is the measurement from the top of the track to the top of the glide? Have a limited amount of clearance
Answer:	I email to check if you receive my last email about this qustion. The manual can explain this question clearly. I have attached a picture for you in my last email. The measurement for the top the track to the top of the glide depends on the height of the door.

• Brand: Hahaemall Surface: Black frosted, corrosion protection Material: High quality Steel.
• Door weight : max 60lb Door panel thickness:0.78" - 1.18'' The clearance from the top of the door to the top edge of the cabinet should be at least 4''.
• Roller size:6.7''(L)x 1''(W) The diameter of the wheel is 1.5''. Steel rail width: 1'' and track length should be twice of door opening width. package include: One set of supper mini barn door Hardware kit - 2x3FT Rail,5xTrack Support,4xRoller,4xDoor Stopper,4xAnti-Pad,2xL Door Guide,2xU Door Guide,1xHex Wrench
• Please note only the hardware is sold.【THE CABINET IS NOT INCLUDED】
• We provede customized service.we provide any size you want. any part missed or defectived during shipping, please let us know, we will send replacement at no charge at first time.

User questions & answers

Question:	What is the thickness of this track not the width which I know is
Answer:	1/4”
Question:	The description text says "Door weight: 100lb-230lb", while one image annotation says "Max door weight < 60 lbs". What is the correct specification
Answer:	Dear Customer, sorry for the wrong description make you confused, it can bear door weight is 60lb. Thank you for your suggestion. We had changed it.
Question:	What does bending mean
Answer:	dear customer, It just the description for the roller, you can ignore it and just check the picture of the roller to see if you like it or not, thanks
Question:	Can I get just one 60 inch bracket , want a clean look, no connection
Answer:	Autumn, It’s been a while since I installed mine but to My recollection you can connect the bar together from the back and you can hardly tell that there is a Splice, especially from a distance.

Product features

Super mini barn door hardware (NO CABINET)

Sliding barn door hardware for super mini cabinet (NO CABINET INCLUDE)

• ADVANCED TECHNOLOGY YOU CAN BELIEVE: All of our barn door hardware is made from quality materials and is handcrafted by skilled artisans. The use of advanced cutting technology in our factory to ensure the precise size of the sliding barn door accessories, especially in the axis of the hanging rail and track interface to show its unique features and advantages.
• EASY TO INSTAL: Our barn door hardware comes complete and ready for you to install yourself. Professional Step-by-step instruction and customer service team help you solve all installation problems in time. Save the cost of finding a carpenter or decoration team.
• PACKAGE INCLUDED: A Barn Door Hardware Kit with 1x 4FT Rail, 3 x Rail Spacers, 2x Rollers, 2x Door Stops, 1x Floor Guide.Cabinet Not Included.
• EXTRA STRONG HARDWARE: Our barn door hardware set is constructed of high-strength powder-coated metal tracks and pulleys with the ability to hold up to 60 lbs. The 5FT single door track kit Fit door panel thickness from 11/16 inch to 1 1/8 inch.Industrial grade material and excellent forging process provide a safe and guaranteed life for your family.
• 7x24 Hours Online Service & 100% Money Back Guarantee -- If there is any parts missing or broken when package arrived,pls contact us via amazon mail,we will send to you at first time.If you need instruction manual or any problem about install,you can also contact us,we always stand by.

User questions & answers

Question:	Is the rail pre-drilled, or can I cut and drill it to my specifications
Answer:	Hi there,The rail have pre-drilled holes to install the rail,also you can cut and drill the rail to the length you need.

• [PREMIUM HARDWARE MATERIAL] - WINSOON sliding barn door hardware is made of high quality steel in high temperature fine black powder coated surface ensures anti-corrosion and years of beauty and longevity. High strength industrial grade tracks and pulleys can easily hold 230 lbs. loads.
• [SLIDE SMOOTHLY AND QUIETLY] - High density thermoplastic wheels provide a smooth, sliding motion and quiet operation, give you ultra-quiet experience. The perfect addition to offices and homes, this barn-styled door is ideal for closets, interior doors and room dividers, sliding doors provide an innovative solution for closed off rooms or tight spaces.
• [ALL MOUNTING HARDWARE INCLUDED] - Kit comes with all necessary hardware for hanging the door, including 2 piece 4FT sliding tracks,1-junction plate, 4-door stoppers, 4-wall hangers with rollers, 2-floor guide, 4-anti-jump disks, 6 M10 bolts and spacers, 8 M10 60 bolts for 1-3/8" to 1 3/4" doors (other door thickness, just tell us via email, we could customize), instructions. TRACK AND HARDWARE ONLY, DOOR NOT INCLUDED.
• [EASY TO INSTALL] - This hardware requires at max 2 people. Includes detailed, easy to follow instructions. Professional customer service team help you solve all installation problems in time, accept custom-made. THE CLEARANCE needed from the top of your door to the ceiling is at least 6 in. For double doors with a thickness of 1-3/8" - 1-3/4" , Ideal for openings up to 48 in. W
• [GUARANTEED SERVICE] - WINSOON sliding barn door hardware kit has passed 120,000 times opening and closing tests, comes with a 5 year warranty. Any problem in using it, our professional Customer Service Team will answer questions for you.

User questions & answers

Question:	how can i get a copy of the installation manual
Answer:	Dear Customer, Please write to [email protected], then we will send you the installation manual. Thank you!
Question:	My 2 doors are 18” each. What length track do I need to order
Answer:	The 6FT Hardware Kit for double doors would work for you perfectly. Thank you!
Question:	I ordered "winsoon 8ft antique double sliding barn door hardware roller track kit black, 4-18ft" and i lost one of the rollers. can i buy just one
Answer:	Yes, we could sell you just one roller, please send us a messgae via Amazon, then we can help you to solve your problem.
Question:	I have two doors. each are 30" wide. my opening is 58.5" wide. i have alot of wall space on each side. should i order the 11 ft track instead of 10ft
Answer:	I think the ten foot should be fine.

Product features

8FT barn door hardware kit for double doors ( door not inlude )

Pre-purchase Information

Door is not included, only the hardware kit is for sale.

You will need 6" clearance from the top of your door to the ceiling (or crown molding, if any) for this kit to fit correctly.

Fit for door panel thickness: 1-3/8 to 1-3/4".

This hardware kit can hold door weight 230lbs.

The gap between door and cabinet is 3/5" based on 1-1/2" thick door.

To help you choose the fit kit, we recommend the track length shoulde be twice of the doors width at least, and you can also cut the track into any length to meet your need.

Safety Assurance Measures

Hanger: Upgraded Nylon wheels, each with 2 life time lubricated bearing ensure slide smoothly and quietly. Test beyond 120,000 rolls.You can use it for a long time!

Door Stopper: Prevent your door from rolling off the rail, Anti-collision, the rubber caps ensure a quiet close

Anti-jump Pad: Prevent door be lifted off rail. Install them on the top of your door, the anti-jump pad and the roller can hold the rail once the door hit the stopper.

T Floor Guide

The floor guide can prevent the door from swing, allow you to open and close your door freely.This hidden door guide need you to open a slot on the bottom of your door, suitble for cabinet has bottom trim

More Choice

What hardware is required if I want to install more doors?

You just need to buy an extra set of hangers by searching the ASIN B01A9SAUZM and make sure they are the same as the hanger in barn door hardware set.

Warm Tip: If you need other track length, or you have too thin / thick door, please tell us via email, we could customize for you.

Packaging List

• 2 x 4FT Rail
• 1 x Junction Plate
• 6 x Track Support
• 4 x Steel Hanger
• 4 x Door Stopper
• 4 x Anti-jump Pad
• 2 x Door Guide
• 1 x Hex Wrench
• All other necessary hardware is included as you see in the pictures.

ONLY the hardware is for sale, doors are NOT INCLUDED.

Product description

Barn doors are hot right now and for good reasons. Not only are they super stylish, they can totally transform a room and inject big personality into any space. Perfect for areas where traditional swinging or pocket doors are impractical, barn doors allow you to break up rooms in a beautiful way. With the Smartxchoice Mount Sliding Barn Door Hardware Kit with 6.6 Foot Track, this sometimes confusing home improvement project becomes simple. It comes with everything expect the doors you need to install on the wall, no tedious work.



Tip: Make sure the spacers are not on backwards. There is a larger end and a smaller end. The larger end goes against the wall or header board, NOT against the track.



Need a double door to divide the master bedroom from the master bathroom?

Now you can simply level the header board, center it and then attach it to the stud.

We marked where the stud were first, used 3" screws, and once leveled just installed the board.





Features:

Sturdy and durable construction, smooth, silent and effortless operation.

Comes with all necessary hardware for hanging the door, door is not included.

Safer and reliable with black powder coated, spacing saving and easy installation.

Specifications:

-Color: Black

-Material: Steel

-Suitable Door Panel: 1.375” - 1.75”Thickness

-Door Weight Capacity: 220LBS

-Rail Length: 6.6FT (2pcs x 3.3FT)

-Rail Hole Interval: 15.98”

-Net Weight: 28.4 LBS



Package Includes:

2 x 3.3FT Rail

2 x Roller

2 x Door Stopper

1 x Floor Guide

1 x Rail Connection Strap

2 x Anti-Jump Block

2 x Screw (with Washer)

5 x Clip

1 x Instruction

• 【6.6FT Single Door Hardware Kit】Rail Length: 6.6FT (2pcs x 3.3ft); Door Weight Capacity: 220 Lb; Door Panel Thickness: 1.57"-1.77"; Package Contains: 2pcs x 3.3ft Rail; 2pcs x Roller; 2pcs x Wall Hanger; 1pcs x Door Stopper; 1pcs x Anti-jump Block; 1pc x Floor Guide; 1pc x Assembly Manual
• 【Heavy Duty Steel & 100% Secure】This 6.6 FT single rail track sliding door hardware kit is made of solid steel and black lacquer finished surface which is waterproof and rust resistance, strong pulleys keep smooth and silent rolling; High strength industrial grade hexagonal bolts able to hold 220 lbs loads, you'll never have to worry about the safety of your wall and door.
• 【Convenient & Multi-purpose】This hardware kit offers a convenient way to DIY your house both for exterior and interior, hanging it on room or cabinet in various styles, or on large picture frames, even oil paintings to light up your rooms, ideal for kitchen, storage room, bedroom, closet, warehouse, cloakroom, wine cellar etc.
• 【Smooth Sliding Track & Simple Use】The doorstop on the track end prevent the pulley from rolling off; Doorstop can be located freely along the track according to your needs; Stop features a rubber dot as buffer and silencer.
• 【Easy and Effortless to Install 】Pre-drilled holes on the rail and all the small accessories included, no need to break the wall and install a door frame to open and shut doors, this unique sliding door hardware kit makes your room looks more spacious and stylish with simply push and pull, space and energy saving while silent pulleys ensure less noisy.

User questions & answers

Question:	what is the min clearance needed from top of rail to the ceiling for the roller clearance
Answer:	3 1/2 inches min

• NATURAL SPRUCE WOOD: Spruce wood surface texture is beautiful, the surface of the wood has a glossy feeling. It is good material with a delicate texture and natural fragrance, not easy to be rotten, but also has good toughness, flexibility, durability, sound insulation, heat insulation, and deodorization. Glue and paint coloring performance is good, not split when nailing.
• PURCHASE NOTES (GAPS ISSUE)：The material of the door is natural wood, in order to prevent the wood from decaying during transportation, the wood is fumigated before shipment, so there will be small GAPS between the boards after the door is installed. But after a period of usage, the natural wood board absorbs the moisture in the air and the board slowly expands. If there is no gap at the beginning of the installation, the expansion of the wood will cause the door to crack.
• DIMENSION: Width: 30", Height: 84", Thickness: 1 3/8", Solid core thick: 1/2". Door can be flipped in either direction. The bottom of the door had been a pre-made groove for the floor guide. / WEIGHT: 42lbs. (PACKAGE INCLUDED: All screws included along with pre-drilled screw holes wood panels and detailed instruction ensuring ease of assembly. (Sliding Door Hardware is not Included).
• EASY INSTALLATION: The barn door is pre-drilled and ready for installation. All wood panels are mitered for a snug fit. It makes it easy for construction and a vertical panel style wood barn door. The tools you need are screwdriver and hammer.
• DIY YOUR HOUSE: The SmartStandard solid wood barn door is a perfect match with your bedroom, dressing room, kitchen and locker room. Versatile Style!(Sliding Door Hardware is Included).

User questions & answers

Question:	have chair rail molding 3” depth of side wall door will slide to when open will door rail system tip out to accommodate the chair rail
Answer:	No. If you use the standard hardware there will be one and one half inch clearance
Question:	I have a 75" wide area of wall space can the track be cut to fit
Answer:	It would be difficult for the average homeowner it's a very sturdy thick piece of metal
Question:	How close to the end of the rail can the door slide to? I have very little room on the top side of a door frame
Answer:	I had the same problem and removed one of the stops ( or more accurate did not install. This allowed door to go almost all of the way. I then installed a 1/2” x 1.5” piece of wood for door to connect with. Shim so it does not show gap. I installed a magnetic catch to finish
Question:	Can I order custom size? like 1ea 35x78 ans 2ea of 27x
Answer:	Sorry, no

Product description

This by-pass closet door repair kit includes four roller assemblies constructed of stamped steel brackets and plastic wheels. One pair of roller assemblies is for installation on the front sliding panels and have only a 1/4 in. offset. The other pair is for the sliding closet door panel that hangs on the rear track. The roller assemblies of this second pair have 1/2 inch offsets. Each roller assembly features 7/8 inch diameter wheels. The wheels have convex (round) edges and all are top hung, side-mount design. These roller assemblies are used on Atlas doors and on many others.

• Roller assemblies for use with top hung, by-passing sliding wardrobe doors
• Fits 3/4 inch to 1-3/8 inch thick doors
• 7/8 in. diameter wheel with convex (round) edge
• Two roller assemblies feature 1/4 in. offset for use on front panel and two roller assemblies feature 1/2 in. offset for rear hanging panel
• Brackets feature diagonal slotted holes for maximum adjustment

User questions & answers

Question:	Where are they made
Answer:	Country of Origin is China.

• [PREMIUM HARDWARE MATERIAL] - WINSOON sliding barn door hardware is made of high quality steel in high temperature fine black powder coated surface ensures anti-corrosion and years of beauty and longevity. High strength industrial grade tracks and pulleys can easily hold 230 lbs. loads.
• [SLIDE SMOOTHLY AND QUIETLY] - High density thermoplastic wheels provide a smooth, sliding motion and quiet operation, give you ultra-quiet experience. The perfect addition to offices and homes, this barn-styled door is ideal for closets, interior doors and room dividers, sliding doors provide an innovative solution for closed off rooms or tight spaces.
• [ALL MOUNTING HARDWARE INCLUDED] - Kit comes with all necessary hardware for hanging the door, including 2 piece 4.5FT sliding tracks,1-junction plate, 4-door stoppers, 4-wall hangers with rollers, 2-floor guide, 4-anti-jump disks, 6 M10 bolts and spacers, 8 M10 60 bolts for 1-3/8" to 1 3/4" doors (other door thickness, just tell us via email, we could customize), instructions. TRACK AND HARDWARE ONLY, DOOR NOT INCLUDED.
• [EASY TO INSTALL] - This hardware requires at max 2 people. Includes detailed, easy to follow instructions. Professional customer service team help you solve all installation problems in time, accept custom-made. THE CLEARANCE needed from the top of your door to the ceiling is at least 8 in. For double doors with a thickness of 1-3/8" - 1-3/4" , Ideal for openings up to 54 in. W
• [GUARANTEED SERVICE] - WINSOON sliding barn door hardware kit has passed 120,000 times opening and closing tests, comes with a 5 year warranty. Any problem in using it, our professional Customer Service Team will answer questions for you.

User questions & answers

Question:	Can I buy extra t shape hangers
Answer:	Yes, but you will have to order them direct from Monsoon. You can send them a message through Amazon.
Question:	Is the track metal powder coated? Also, are the wheel stopperA adjustable? Thank you
Answer:	Yes, the metal is powder coated and the wheel stoppers are adjustable.
Question:	Is this suitable for exterior
Answer:	Yes, it would suit exterior. However, the wheel is made of plastic which is also strong enough for use , will you mind it? And we also suggest to add a shed to protect from rain and sunshine and last the using life of the hardware . Thank you.
Question:	What size are the rolling wheels
Answer:	The rolling wheels is about 12cm (4.72inch) in diameter and the arm length is about 35cm (13.78inch). Thank you!

Product features

9FT barn door hardware kit for double doors ( door not inlude )

Pre-purchase Information

Door is not included, only the hardware kit is for sale.

You will need 8" clearance from the top of your door to the ceiling (or crown molding, if any) for this kit to fit correctly.

Fit for door panel thickness: 1-3/8 to 1-3/4".

This hardware kit can hold door weight 230lbs.

The gap between door and cabinet is 3/5" based on 1-1/2" thick door.

To help you choose the fit kit, we recommend the track length shoulde be twice of the doors width at least, and you can also cut the track into any length to meet your need.

Safety Assurance Measures

Hnager: Upgraded Nylon wheels, each with 2 life time lubricated bearing ensure slide smoothly and quietly. Test beyond 120,000 rolls.You can use it for a long time!

Door Stopper: Prevent your door from rolling off the rail, Anti-collision, the rubber caps ensure a quiet close

Anti-jump Pad: Prevent door be lifted off rail. Install them on the top of your door, the anti-jump pad and the roller can hold the rail once the door hit the stopper.

L Floor Guide

Two Install Methods: Like picture shows.

Work for non-grooved and grooved doors; Fully adjustable, suitable for all thickness sliding barn doors.

The floor guide can prevent the door from swing, allow you to open and close your door freely.

More Choice

What hardware is required if I want to install more doors?

You just need to buy an extra set of hangers by searching the ASIN B079HRY8H2 and make sure they are the same as the hanger in barn door hardware set.

Warm Tip: If you need other track length, or you have too thin / thick door, please let us know, we could customize for you.

Packaging List

• 2 x 4.5FT Rail
• 1 x Junction Plate
• 6 x Track Support
• 4 x Steel Hanger
• 4 x Door Stopper
• 4 x Anti-jump Pad
• 2 x Door Guide
• 1 x Hex Wrench
• All other necessary hardware is included as you see in the pictures.

ONLY the hardware is for sale, doors are NOT INCLUDED.

• Why Choose Us: With 1/3 of the market price, you can get the same quality products here! Premium quality hardware kit are provided along with a completely turnkey experience
• Simple And Easy To Install: Professional instruction and customer service team help you solve all installation problems in time. Save the cost of finding a carpenter or decoration team
• Package Included: A Barn Door Hardware Kit (1x 5FT Rail, 4x Rail Spacer, 2x Roller, 2x Door Stop, 2x End Cap, 1x Floor Guide, 1x Hex Key;1x Door Handle;all other necessary hardware is included as you see in the pictures. For 16 inch stud.) *Door Not Included
• Door Weight Capacity: 220 lb; Fit door panel width: 30"; Fit door panel thickness: 1 3/8" and 1 3/4"
• The Best Choice For Your House: This modern twist on the classic barn door not only saves space, it allows the ability to open up multiple rooms without the annoyance of a swinging door

User questions & answers

Question:	What is the length of door
Answer:	It does not come with a door. Just the hardware to hold the door.
Question:	Does this come off the rail easily
Answer:	I haven't had any issues with the door coming off the rail and I really don't see how that would be possible
Question:	Will the 5 foot rail allow 30 inch door To go to the end of the rail
Answer:	Probable, depending on how far you inset the wheels on the door. I would suggest you lay out a template to test it. Be mindful of the mounting points to the wall as the bolts may cause an obstruction.
Question:	is this a soft closing door
Answer:	Actually it is not a soft closing door. There is no mechanism with this hardware to slow the door down when it comes to either end of the track. There are stoppers that will keep the door from rolling off of it.