13 best ge home automation systems

Product description

UTC Formerly GE Security/Caddx 60 783 02 SB2000 AUTOMATION MODULE RS232

• GE Security 60-783-02 SuperBus 2000 RS-232 Automation Module

User questions & answers

Question:	Does this module allow me to get alarm notifications when sensors are tripped
Answer:	Yes, this module communicates with the alarm panel, but is not meant to monitor alarms. It will recognize all sensors, but only when paired with an interface to the module via RS232 handshake.
Question:	Is it wireless
Answer:	No. It connects to your alarm panel using a 22GA 4 Conductor wire. Connect to your computer using a STRAIGHT THROUGH serial cable. I connected mine to an IP to Serial converter and then plugged it into a switch I have near the panel to get it onto my home network. If you mount the SuperBus AM close to your computer just use a serial cable (if your computer has serial port). You may be able to use serial to USB to go directly into computer, I'm not sure, didn't try it.
Question:	How do I connect it to my concord 4 panel to get it to work? What else do I need besides the rs232 cable and a home controller
Answer:	The module comes with the instructions. It is pretty straightforward to connect it up, just 4 wires, 2 for power, 2 to connect to the A/B SuperBus lines. I recommend powering down the circuit to the alarm panel at the breaker and disconnecting the backup battery before connecting it up. For me, once I connected it and powered all back up again, the panel automatically recognized the module. Note that the panel will start beeping periodically if your home controller isn't sending a message to it every so often to tell it everything is alright. This is a security feature to prevent someone from tampering with it and I don't believe you can stop it other than having your controller send the appropriate sequence. Note, if your controller stops sending this for any reason, it will cause the panel to start beeping your control pads (very very annoying). I use HomeSeer and it has a plug-in that handles all this automatically in the background. If your controller is going to sit close enough to the panel, all you need to do is connect the module to a COM port on the controller and direct your controller software to that port to communicate with it. If it isn't going to be that close, you will have to figure out how to get the communication to the controller. RS-232 doesn't work very well over long distances. In my case, my house is wired for Ethernet and the patch panel for this is right next to the alarm panel. So I got an RS-232 to Ethernet bridge and set up the HomeSeer plug-in to communicate with that over the network. You will have to evaluate how to make it work in your house. Best of luck.

Product description

Home automation is even smarter with the GE-branded Unfrighten Z-Wave Plus In-Wall Smart Switch with Quick Fit and Simple Wire. When paired with a compatible hub, the hardwired smart switch operates wall, ceiling and accent lighting through individual commands and programmed settings. Wirelessly control and schedule indoor or outdoor fixtures for effortless management of your home. Your automation possibilities are seemingly infinite when connected to hubs from Ring, Wink, SmartThings, Home Seer, Vera, Nexia and more.

• VOICE CONTROL – ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). Works with the following Z-Wave certified hubs: Smart Things, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivian, Nexia, Honeywell, Home Seer, Harmony Home Hub Extender, Vera and more
• ADVANCED DESIGN 2ND GENERATION MODEL – Improved components reduced the housing depth by up to 20% compared to previous Z-Wave models and eliminated the need for heat tabs. Quick Fit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space. Auto line-load sensing terminals support fast and easy installation by detecting line and load wires and configuring the dimmer accordingly. Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups
• VERSATILE APPLICATIONS – Control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual ON/OFF operation from the switch. Home automation is simple through custom scenes, personalized scheduling and convenient alerts. The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723, 12728, 46199, or 46200. Up to four add-on switches can be connected to the same device
• FULL-HOME COVERAGE - Z-Wave Plus works with all previous Z-Wave generations to allow continued expansion of your home-automation network. The switch is capable of controlling indoor or outdoor fixtures for whole-home automation = and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150ft. Extended signal range increases your home automation coverage to enhance your control
• EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Includes white and light almond paddles (wall plate not included). Works with all LED, CFL, incandescent and halogen bulbs as well as other devices. Operating temperature range 32-104 degrees Fahrenheit

User questions & answers

Question:	Having trouble paring with Ring - any advice? Keeps saying device not found
Answer:	Don't try pairing as a smart light. Go under set up a device then security devices and scroll down to "works with ring". That will walk you through pairing. I just did it with GE 14291
Question:	Is this comparable with turning on and off mutable lights? I have 2 switches controlling 2 lights
Answer:	This model is specifically designed to replace a standard light switch in a residential home. It is 3-way compatible, to work with a GE add-on switch so the 2 of them together can replace 2 light switches and both control the same light(s).
Question:	Is there an led indicator on the switch itself when it's in on/off
Answer:	Yes, there is an LED indicator light on the bottom right hand corner of the switch. It is default set for the LED indicator to be On, when the connected light is turned off. This allow the switch to be found in the dark. You can also change the LED light by pressing 3 times up, and 1 time down quickly to cycle between 3 other options (LED ON when Connected Light is ON, LED always off, LED always on) You can see details of these 4 options in the instruction manual.
Question:	Will this work as part of a 3-way switch
Answer:	Yes, you will need This GE 46201 and the GE 46199 Add-On Switch to replace the 2 switches in the 3-way installation.

Product features

QuickFit

The revolutionary, space-saving QuickFit design features a rounded housing and 20 percent smaller depth compared to previous models. The elimination of heat tabs also offers a more convenient installation and user-experience without reducing the electrical ratings.

SimpleWire

With the SimpleWire technology, the new smart controls feature auto line-load sensing terminals, which eliminate guesswork or testing line and load wires. The dual offset ground ports are another defining feature that save time, simplify installation and reduce wire congestion in multi-switch setups. Neutral wire required.

Versatility

Automating your home not only makes your life easier, but it also saves energy, cuts costs, and boosts your home’s security. Control your lights, fans and appliances, schedule a timed event, or create a custom scene from anywhere in the world at anytime of the day. Compatible with LED, CFL, incandescent and halogen bulbs, and other hardwired devices.

Voice control with Alexa & Google

Control your connected device with only your voice!

• Works with Amazon Alexa
• Works with Google Assistant
• Alexa/Echo/Google Assistant devices sold separately.
• Z-Wave certified hub must be Alexa compatible.
• NOT directly compatible with ECHO PLUS. Will work through Z-Wave certified hub only.

Works with all Z-Wave Compatible Hubs

• Ring
• Honeywell
• SmartThings
• Wink
• ADT Pulse and Control
• Trane
• Nexia
• HomeSeer
• Vera
• And more!

Personalize

Changeable paddles in a variety of colors like black, brown, and ivory, are available to match your home’s decor. Replace existing switches with easy installation.

About Jasco Products

Based in Oklahoma City, Jasco Products Company designs, develops and engineers consumer electronic products to simplify your life. To ensure your satisfaction, our U.S.-based, bilingual Consumer Care associates are fully trained to assist you with any products in our extensive line.

The future of home automation is here

Experience the latest generation of Z-Wave smart controls for in-wall configurations with toggle- and paddle-style switches to accommodate any home. With a QuickFit design and groundbreaking SimpleWire technology, the new line of smart switches and dimmers provide the easiest installation and most secure smart home solution for consumers to deploy in their homes. Unlike other options on the market, the add-on switches provide the same control as a master switch with the functionality of dimming from remote locations. Up to five add-on switches can also be connected to the same light, fan or appliance.

The new line of Z-Wave smart controls also includes S2 security and SmartStart, which ensures each device has a safe network connection for enhanced protection and convenient device-specific codes for automatic pairing and effortless installation.

Product description

Expand your control with the GE-branded Enbrighten Z-Wave Plus Plug-in Smart Switch. When paired with a compatible hub, the smart switch operates lighting, fans, pumps and more through individual commands and programmed settings. Wirelessly control and schedule indoor fixtures for effortless management of your home. Your automation possibilities are seemingly infinite when connected to hubs from Wink, SmartThings, HomeSeer, Vera, Nexia and more.

• VOICE CONTROL – Alexa & google assistant compatible (requires a Z-Wave certified hub). Works with the following Z-Wave certified hubs: SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, HomeSeer, Vera and more.
• HASSLE-FREE OPERATION – Control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual ON/OFF operation from the switch. Home automation is simple through custom scenes, versatile scheduling and convenient alerts.
• SINGLE OUTLET – Use one grounded Z-Wave controlled outlet to wirelessly schedule and operate a lamp or small appliance from anywhere at any time with a mobile device.
• FULL-HOME COVERAGE – Z-Wave Plus works with all previous Z-Wave generations to allow continued expansion of your smart-home network. The switch is capable of controlling indoor fixtures for whole-home automation.
• EASY INSTALLATION – No wiring required. Simply plug in the device and connect to your hub for convienient on/off functions. Space-efficient design leaves the second outlet free for continued use and easily fits behind furniture. Works with all LED, CFL, incandescent and halogen bulbs as well as other devices. Operating temperature range 32-104 degrees Fahrenheit.

User questions & answers

Question:	Will 2 plugs help me switch which outlet is controlled by the light switch
Answer:	it holds a 750 ml wine bottle perfectly
Question:	Is this IP44 rated for water intrusion
Answer:	No, use a good cork & they don’t leak.
Question:	will this work with a 1500 watt space heater
Answer:	N/A
Question:	what is the max ambient temperature rating
Answer:	I don't see why not. I stack them two high in my fridge but that is all room I have...

Product features

GE Enbrighten Z-Wave Plus Smart Plug - 1 Grounded Outlet

Wirelessly schedule and control any lamp or small appliance from anywhere, at any time with a smartphone, tablet, PC or Z-Wave remote or control lighting on location with the manual push-button control. Space-efficient design does not block second outlet or obstruct furniture placement.

Ultimate Flexibility

Control your lights, small fans and other appliances, schedule a timed event, create a custom scene from anywhere in the world, at any time of the day, and charge your mobile devices from your smartphones, tablets, PCs and Z-Wave enabled remotes.

1 Grounded Outlet and Manual On/Off Button

Smart Plug features one grounded outlet.

Manual On/Off physical button is located on the top of the plug in module.

Works with Appliances and Lighting

Smart Plug is ideal for lamps and small appliances such as fans, heaters, coffee makers, etc.

• Ideal for living rooms and bedrooms

Compatible with CFL, LED, incandescent, halogen lighting and other small devices like fans and lamps

Space Saving Design

When plugged in to the top outlet of your standard wall outlet this smart plug will not block access to the bottom outlet.

Outlet is located on the left side of the plug-in allowing for ease of use behind furniture like tables, couches, and beds.

Z-Wave Plus Smart Dimmer - GE 28167

Wirelessly schedule, dim, and control your lamp or small appliance from anywhere, at any time with any mobile device. Smart Dimmer features 1 Z-Wave controlled outlet allowing control of one device.

Z-Wave Plus Outdoor Smart Plug - GE 14284

Wirelessly schedule and control your home's outdoor lighting and appliances, including seasonal and landscape lighting, fountains and pumps, from anywhere, at any time. Features one Z-Wave enabled outlet with integrated outlet cover that protects module from dirt and debris when not in use. Weather and impact resistant housing withstands damp or wet conditions

Z-Wave Plus In-Wall Smart Switch - GE 14291

Transform any home into a smart home with the GE Z-Wave Plus In-Wall Smart Switch. You can create custom scenes and schedule timed events either when you're at home or when you're away. Install in-wall with either single or multi-switch applications and you're on your way.

Product description

Home automation is even smarter with the GE-branded Enbrighten Z-Wave Plus In-Wall Smart Switch with Quick Fit and Simple Wire. When paired with a compatible hub, the hardwired smart switch operates wall, ceiling and accent lighting through individual commands and programmed settings. Wirelessly control and schedule indoor or outdoor fixtures for effortless management of your home. Your automation possibilities are seemingly infinite when connected to hubs from Ring, Wink, SmartThings, Home Seer, Vera, Nexia and more.

• VOICE CONTROL – ALEXA AND GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). Works with the following Z-Wave certified hubs: SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, Home Seer, Harmony Home Hub Extender, Vera and more.
• ADVANCED DESIGN 2ND GENERATION MODEL – Improved components reduced the housing depth by up to 20% compared to previous Z-Wave models and eliminated the need for heat tabs. Quick Fit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space. Auto line-load sensing terminals support fast and easy installation by detecting line and load wires and configuring the dimmer accordingly. Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups. For increased convenience, the optional toggle backlight provides a soft glow and can be reversed, turned off or always on based on your indicator preferences.
• VERSATILE APPLICATIONS – Control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual ON/OFF operation from the switch. Home automation is simple through custom scenes, personalized scheduling and convenient alerts. The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12728 or 46200. Up to four add-on switches can be connected to the same device.
• FULL-HOME COVERAGE – Z-Wave Plus works with all previous Z-Wave generations to allow continued expansion of your home-automation network. The switch is capable of controlling indoor or outdoor fixtures for whole-home automation and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150 feet. Extended signal range increases your home automation coverage to enhance your control.
• EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Wall plate not included. Works with all LED, CFL, incandescent and halogen bulbs as well as other devices. Operating temperature range 32-104 degrees Fahrenheit.

User questions & answers

Question:	Can this control fan and it's speed? I currently have a fan toggle switch which has a tine slider underneath, can I replace it with this switch
Answer:	This model is a switch only and could only control a fan to turn on and off.
Question:	The face place doesnt seem to sit flush with the wall due to how big the switch is. New home, switch is screwed down as far as it will go. Suggestions
Answer:	If the wiring behind the switch is pushing the switch out the only recommendation we could offer would be to contact a licensed electrician to redo or trim out any excess wiring behind the switch location. If the switch box is a much older or smaller than standard switch box, it may be necessary to remove and replace the switch box with a more standard box.
Question:	Why is the timer disabled every time it used
Answer:	The GE 46202 does not contain a timer. If you are referencing a timer function on the hub/controller that you use to control this device, then it would be necessary to contact the support team of that specific hub. This product simply receives a command when the hub is ready to turn it on/off from schedules, scenes, groups, etc. It does not interact with those functions on the hub though.
Question:	I feel confident that I installed correctly, but when I manually flip the switch it fails. Anyone run into trouble that they can give any tips on
Answer:	This switch is designed to work manually even if it isnt connected to a Z-Wave controller. While you are confident, the most common issue is either wires becoming disconnected when everything is pushed back into the junction box, or something not being wired correctly. This switch requires 4 wires to be connected to the back of the switch. Line, Load, and Ground are only 3 of those wires that are connected to a standard switch that you replaced this with. You will also need a neutral wire as well. This is typically a bundle of white wires in the back of the box. You will need to take the white jumper wire included in the box and connect it to the neutral terminal on the back of this switch, then connect it into the bundle of neutrals in the switch box. If you removed 1 neutral from the bundle and connected it into this switch, then it is necessary to put it back into the bundle and use the jumper wire included instead.

Product features

QuickFit

The revolutionary, space-saving QuickFit design features a rounded housing and 20 percent smaller depth compared to previous models. The elimination of heat tabs also offers a more convenient installation and user-experience without reducing the electrical ratings.

SimpleWire

With the SimpleWire technology, the new smart controls feature auto line-load sensing terminals, which eliminate guesswork or testing line and load wires. The dual offset ground ports are another defining feature that save time, simplify installation and reduce wire congestion in multi-switch setups. Neutral wire required.

Versatility

Automating your home not only makes your life easier, but it also saves energy, cuts costs, and boosts your home’s security. Control your lights, fans and appliances, schedule a timed event, or create a custom scene from anywhere in the world, at anytime of the day. Compatible with LED, CFL, incandescent and halogen bulbs, and other hardwired devices.

Voice control with Alexa & Google

Control your connected device with only your voice!

• Works with Amazon Alexa
• Works with Google Assistant
• Alexa/Echo/Google Assistant devices sold separately.
• Z-Wave hub must be Alexa compatible.
• NOT directly compatible with ECHO PLUS. Will work through Z-Wave hub only.

Works with all Z-Wave Compatible Hubs

• Ring
• Honeywell
• SmartThings
• Wink
• ADT Pulse and Control
• Trane
• Nexia
• HomeSeer
• Vera
• And more!

About Jasco Products

Based in Oklahoma City, Jasco Products Company designs, develops and engineers consumer electronic products to simplify your life. To ensure your satisfaction, our U.S.-based, bilingual Consumer Care associates are fully trained to assist you with any products in our extensive line.

The future of home automation is here

Experience the latest generation of Z-Wave smart controls for in-wall configurations with toggle- and paddle-style switches to accommodate any home. With a unique QuickFit design and groundbreaking SimpleWire technology, the new line of smart switches and dimmers provide the easiest installation and most secure smart home solution for consumers to deploy in their homes. Unlike other options on the market, the add-on switches provide the same control as a master switch with the functionality of dimming from remote locations. Up to five add-on switches can also be connected to the same light, fan or appliance.

The new line of Z-Wave smart controls also includes S2 security and SmartStart, which ensures each device has a safe network connection for enhanced protection and convenient device-specific codes for automatic pairing and effortless installation.

Product description

The C by GE On/Off Smart Switch-Toggle adds smart bulb functionality to traditional bulbs and keeps smart bulbs smart. The classic design blends seamlessly with other toggle switches. The smart Wi-Fi switch adds out-of-home control, scheduling and scene setting to traditional bulbs. When C by GE smart bulbs are installed, the smart switch allows app or voice control even when power is turned off at the switch. Pair the Smart Switch with C by GE Smart Bulbs in other fixtures like table lamps and control your all your lights in the room from one wall switch. C by GE On/Off Smart Switch wirelessly connects with other C by GE Smart Switches so you can control the same light fixture from multiple switches without a travel wire, even if the switches are on different circuits. Simple DIY set up. The Smart Switch connects directly with Google Home and Alexa devices without a hub required. Neutral wire--usually a white or gray wire--is required.

• A SMART SWITCH FOR EVERYBODY IN THE HOUSE: The C by GE smart light switch allows you to control your lights through touch, C by GE mobile app, or voice assistant. With Google Home or Alexa, light switches from C by GE make light control easy.
• C BY GE SMART LIGHT SWITCH: Get convenience and comfort with your smart bulbs and light switch always being ready to respond. With enhanced functionality like out of home control and scheduling, you will never come home to a dark house.
• BUILD YOUR SMART HOME WITH SMART BULBS THAT WORK WITH ALEXA/GOOGLE HOME: C by GE smart bulbs and the smart switch work with voice and app control at all times, even when the wall switch is turned off.
• MAKE TRADITIONAL LIGHT BULBS SMART BULBS: The C by GE wifi switch allows you to easily make your light bulbs compatible with Google Home or Amazon Alexa when paired with your smart devices.
• A SMART SWITCH FOR LED LIGHTS AND MORE: Set scenes to match your mood by controlling the wifi light switch from C by GE with mobile app, touch, or voice assistant. Works with LED, incandescent, halogen, and CFL bulbs.
• WIRELESS CONTROL OF 3-WAY SMART SWITCHES: Add any two C by GE Smart Switches and group them in the C by GE iOS/Android app for 3-way control of any large space.

User questions & answers

Question:	Does it support any dimmable leds? i have bbounder leds from amazon which work fine with wemo but not dimming with this one
Answer:	Thanks for reaching out! We have a list of known compatible bulbs that have been tested with these switches you can find that information at https://www.gelighting.com/compatibility. We also sell our own dimmable LED bulbs that work with these switches, you will just have to set the bulb type in the switch settings. Please reach out to our support team if you need further assistance. -C by GE Support
Question:	Can one of these be use as a 2-switch system. I have one switch that act as 2 switch for thr living room and another one for the kitchen
Answer:	If your intent is to use these switches as a 3-way (2 switches controlling 1 set of lights) then yes, our switches can do that. However, both switches will need to be C by GE switches. Please contact our support staff for more information regarding the switches, thank you!
Question:	Can this switch connect to and control C by GE smart plugs? and/or third party smart plugs
Answer:	It will work with the C by GE Smart Plug by adding them to the same room within the C by GE app. It will not work with 3rd party products.
Question:	I have ge smart lights, if i buy this and turn the switch off will the light bulb still work properly
Answer:	This took me a while to figure out but as long as all the bulbs being powered of this switch are C by GE light bulbs and you tell the switch that through the C by GE app on your phone, then yes, they will remain always connected. However, if just one bulb off the switch isn't a C by GE smart bulb this setting won't work right.

Product features

Works With Any Bulb

Turns ordinary incandescent, halogen, and LED bulbs into smart bulbs and keeps C by GE smart bulbs connected even when the switch is turned off.

Set Schedules

Schedule lights to turn on and off automatically.

Control Away From Home

Turn lights on or off from your phone when you’re not home.

Group Together

Group multiple switches and bulbs together and control all your lights from one switch.

Control With Your Voice

Command your lighting using just your voice when paired with Amazon Alexa, the Google Assistant or Apple HomeKit devices

No Hub Required for Out of Home and Voice Control

Connect directly to Google Home and Amazon Alexa devices without a standalone bridge or hub.

Blends With Traditional Switches

Creates a seamless look next to other toggle switches.

Simple Do-It-Yourself Set Up

Takes about 30 minutes and a screwdriver to install the switch. Pliers and a voltage tester optional.

Compatible with Single Pole and 3-Way Switch Applications

Fits in existing electrical boxes. Neutral wire required. Works with 3way applications by replacing both switches with C by GE Smart Switches.

One Touch Wireless Whole Room Control

Install C by GE Smart Bulbs in other fixtures and set them up in the C by GE app to wirelessly control all your lights from one smart switch.

Group Switches Without Travel Wires

Connect multiple switches without a travel wire. Control lights that aren’t wired on the same circuit, like controlling a kitchen light from your hallway.

Requires Neutral Wire & Wifi

Check your wiring to make sure you have a neutral wire—often a gray or white wire inside the electrical box—and WiFi connectivity before starting installation. 2.4 GHZ WiFi required.

Product description

The C by GE On/Off Smart Plug makes any lamp or device that plugs into a wall smart. The built-in Wi-Fi bridge adds out-of-home control for your lighting and devices and voice control when paired with a voice assistant. The plug also enables scheduling and scene setting to traditional bulbs and devices. The Smart Plug adds smart functionality to fixtures where smart bulbs won't fit or match the look of the fixture. Pair the Smart Plug with C by GE Smart Bulbs in other fixtures and Smart Switches to control all your lights together. Use the Smart Plug with other devices like curling irons, fans and electronic devices to turn them on or off remotely or schedule them to operate around your routine. The Smart Plug connects directly with Google Home and Alexa devices without a hub required. Simply plug into a standard wall socket and you're ready to go.

• UPGRADE YOUR HOME WITH SMART PLUGS THAT WORK WITH ALEXA: Compatible with Google Home and Alexa, smart plugs from C by GE make your traditional devices, smart by providing voice and app control at all times, even when you are out of home.
• SMART OUTLETS MAKE ANY ELECTRONIC DEVICE SMART: The C by GE smart plug makes any lamp or electric device, smart, so smart plugs and devices respond to voice commands as an entire smart home system.
• CONTROL SMART PLUGS WHILE AWAY FROM HOME: Get added home security and convenience with the ability to control your electric devices away from home with these Wi-Fi outlets, so you never worry about leaving your flat iron on or coming home to a dark house.
• BUILD YOUR SMART HOME WITH NO HUB REQUIRED: The C by GE smart plugs that work with Google Home and Alexa include a hub that connects directly to voice assistant devices, so you don't need to purchase a standalone bridge or hub.
• SMART PLUG COMES IN A COMPACT SIZE: The C by GE smart plugs that work with Alexa and Google Home feature a slim design that keeps the second outlet in standard wall outlets available to plug in another device or smart plug.

User questions & answers

Question:	We this device work as a bridge for GE C smart light bulbs
Answer:	Hello! Yes our Smart Plug will provide a Wi-Fi connection to any bulbs that are setup under the same Location in the C by GE app.
Question:	Does c by ge smart plug also monitor electricity usage
Answer:	No, unfortunately, it does not. it only serves as the wifi bridge for the lights and as an on/off control for the outlet.
Question:	Can the plug be operated via Bluetooth, like the light bulbs can
Answer:	Yes! All the C by GE line of products will communicate via BlueTooth between one another and the C by GE app. The plug is great because it allows you the capability of accessing ALL the C by GE devices in your home when you are outside of BlueTooth range.
Question:	Can this plug dim a dimmable bulb? Or set of dimmable string lights
Answer:	Hello. Our Smart Plug does not function as a dimmer. It is on/off only.

Product features

Add Smart Functionality to Devices

Make other electric devices smart in any room of the house—like slow cookers, space heaters, or curling irons.

Schedule Your Flat Iron

For peace of mind, schedule devices like your flat iron to warm up before you get out of bed—and to turn off when you're not home.

Control Devices From Across The Room

For added convenience, use your voice to control devices like fans from across the room (voice assistant required), or set a schedule to turn them on before you arrive home.

Enable More Features for Your C by GE Smart Bulbs

Smart Plug + Smart Bulb = lighting control away from home. Pair these with a voice assistant and enjoy hands-free control, too.

Never Come Home to a Dark House

Schedule and automate your lighting through the smart plug and make sure you always come home to a well-lit house.

Enjoy Hands-Free Comfort

Using a voice assistant, you can enjoy the hands-free control capabilities of C by GE smart products.

Product description

Set the scene with the GE-branded Enbrighten Z-Wave Plus In-Wall Smart Dimmer. When paired with a compatible hub, the hardwired smart dimmer operates wall, ceiling and accent lighting through individual commands and programmed settings. Wirelessly control and schedule indoor or outdoor fixtures for effortless management of your home. Your automation possibilities are seemingly infinite when connected to hubs from Wink, SmartThings, HomeSeer, Vera, Nexia and more.

• VOICE CONTROL – ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). Works with the following Z-Wave certified hubs: SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera and more.
• VERSATILE DIMMING OPTIONS – Easily replace any standard in-wall switch equipped with a neutral wire to remotely turn ON/OFF, adjust lighting brightness and create schedules for a wide range of fixtures. The dimmer adjusts brightness levels of dimmable LED, CFL, incandescent and halogen lights from 0-100 percent to reduce energy costs and improve bulb life. Control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual ON/OFF operation from the dimmer. Home automation is simple through custom scenes, versatile scheduling and convenient alerts.
• 3-WAY READY – The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723 or 46199. Up to four add-on switches can be connected to the same device.
• FULL-HOME COVERAGE – Z-Wave Plus works with all previous Z-Wave generations to allow continued expansion of your home-automation network. The dimmer is capable of controlling indoor or outdoor fixtures for whole-home automation and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150ft. Extended signal range increases your home automation coverage to enhance your control.
• EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Includes white and light almond paddles (wall plate not included). Full-range dimmability for use with dimmable LEDs and CFLs as well as incandescent and halogen bulbs. Supported wattage – 600W incandescent, 150W CFL/LED. Supported voltage – 120VAC. Operating temperature range 32-104 degrees Fahrenheit.

User questions & answers

Question:	What alexa commands can you give this when paired with a hub? can you give it a name and dim to a percent: "alexa dim living room lights to
Answer:	The most common commands that we have tested and confirmed work with our devices through Hubs like SmartThings, Iris, or Wink are as follows:1. On (This will return the light to the last set brightness level)2. Off, 3. Specific percentage (1% all the way to 100% for full brightness)4. Brighten (Increments up 25% from current light level)5. Dim (Increments down 25% from current light level)With that said, the GE 14294 must be connected to a Z-Wave certified hub that is integrated with Alexa to allow control from an Alexa enabled device. Because the commands are sent to the hub specifically, we may not have the full list of commands capable of controlling lighting devices.
Question:	Does the 14294 have the same blue light as the 12724? I'm mounting them side by side and want them to match
Answer:	Yes, the physical button and LED light are identical between the GE 14294 and GE 12724
Question:	Will this ge z-wave plus dimmer in-wall switch work as a 3 way with the appropriate add on switch such as
Answer:	The answer is yes. You can pair the 12723 with either the in wall paddle switch or the in wall paddle dimmer.
Question:	One of my switches wont turn off the led light bulb. the bulb always stays on dim. do i have a bad switch
Answer:	No, likely the problem is with the bulb. The LED bulbs need to be dimmer comparable. It is worth noting that some say they re comparable and are not. DR

Product features

GE Z-Wave Plus In-Wall Smart Dimmer Switch

Transform any home into a smart home with the GE Z-Wave Plus In-Wall Smart Dimmer Switch. Create custom scenes, schedule timed events and dim the lights when you're at home or when you're away.

• Requires a Z-Wave certified gateway.
• Wirelessly schedule, control and adjust the brightness of any dimmable lights from anywhere.
• Works with dimmable LED, CFL, halogen and incandescent bulbs, and other devices.
• Requires in-wall installation with hard-wired connections
• NEUTRAL WIRE REQUIRED
• Includes white and light almond paddles (wall plate not included)

Ultimate Flexibility

Control your lights, fans and appliances, schedule a timed event or create a custom scene from anywhere in the world, at any time of the day, from your smartphones, tablets, PCs and Z-Wave enabled remotes.

Full Range Dimming

Adjust brightness from 0 – 100% to cut energy costs and extend bulb life. Set the scene for an evening ambiance or a fully lit work space.

Compatible with Dimmable Bulbs

Works with dimmable LED, CFL, halogen and incandescent bulbs - NOT for use with non dimming bulbs.

Easy Installation

The dimmer replaces your current light switch and is easy to install using your home's existing wiring.

Please ensure your home has a neutral wire before purchasing.

GE Enbrighten Z-Wave Family

GE Enbrighten provides a full line of Z-Wave products to make your whole home a smart home.

Product description

Transform any home into a smart home with the GE 40 Amp Z-Wave Plus Direct-Wire Indoor/Outdoor Smart Switch. When added to a Z-Wave network, the heavy duty switch enables wireless control of On/off functions for large load, hard-wired applications such as waters heaters, landscape lighting, spas, pool pumps and heaters. The Smart Switch can be used indoors or outdoors and features an easy access wire connection block, front mounted LED lights indicating power and On/off status, and an override switch to turn connected devices on or off manually. The Smart Switch is housed in a lockable, tamper-resistant case to ensure settings and wiring are secure. The rugged, weather-resistant design will keep out dirt and debris while being suitable for use in extreme weather conditions.

• WEATHERPROOF – A rugged, wall-mount, metal NEMA-3R enclosure with lockable door withstands the elements for outdoor use while protecting wiring and settings against tampering.
• UNIVERSAL USE – With multiple configuration possibilities, the double-pole/single-throw switch supports 120-277VAC and up to 40A. Up to two 120VAC device can be connected with options for single- or dual-load control.
• ENERGY MONITORING – Remotely track Watts and kilowatt-hours when connected to a compatible Z-Wave hub that supports energy monitoring.
• OPERATION MODES – An integrated toggle switch allows the choice of manual or remote operation with ON, OFF and Z-Wave modes. Indicator LEDs are visible on the front of the housing to display power status without opening the water-tight door.
• EASY-ACCESS WIRING – Clearly numbered screw terminals provide fast, secure connections and are protected from accidental contact by a clear plastic guard.

User questions & answers

Question:	Does this device need to have Nutral wire when running 220Volt
Answer:	the GE 12726 can have 2-120 VAC devices wired to it at the same time, however both can only be controlled together to turn on and off at the same time. They cant be controlled independently.
Question:	Does this device have a dry contact ? ( I need a timer for my float switch on the water tank
Answer:	Smartthings have their plugs you can use.
Question:	Can the exterior button be disabled so that it does not control the connected device? I wish to keep access restricted to the control
Answer:	The GE Bluetooth are only voice controllable with Alexa using the Avi-On RAB. Google Assistant is not an option at this time.
Question:	can you control multiple devices
Answer:	The GE Bluetooth devices only connect to a Smartphone or tablet using the Avi-On Application. It cannot connect to a laptop.

Product features

GE Z-Wave Plus Direct-Wire Indoor/Outdoor Switch

Transform any home into a smart home with the GE 40 Amp Z-Wave Plus Direct-Wire Indoor/Outdoor Smart Switch. When added to a Z-Wave network, the heavy duty switch enables wireless control of on/off functions for large load, hard-wired applications such as waters heaters, landscape lighting, spas, pool pumps and heaters.

Complete Control + Z-Wave Signal Repeater

Wireless control from smartphones, tablets, PCs and Z-Wave enabled remotes whether you are in your home or away!

40 Amp switch functions as a Z-Wave signal repeater in order to help strengthen and extend your home Z-Wave network.

Ultimate Flexibility

Remotely control the On/Off functions, schedule and customize scenes for large load, hard-wired applications - from anywhere in the world.

Z-Wave Hub Required.

Compatible Devices and Bulbs

Compatible with all LED, CFL, halogen, incandescent bulbs and large load hard-wired devices such as waters heaters, landscape lighting, spas, pool pumps and heaters

Energy Monitoring

Energy monitoring capability allows remote monitoring of watt- and kilowatt hours.

Product description

Expand your control with the GE-branded Enbrighten Z-Wave Plus In-Wall Smart Switch. When paired with a compatible hub, the hardwired smart switch operates lighting, fans, pumps and more through individual commands and programmed settings. Wirelessly control and schedule indoor or outdoor fixtures for effortless management of your home. Your automation possibilities are seemingly infinite when connected to hubs from Wink, SmartThings, HomeSeer, Vera, Nexia and more.

• VOICE CONTROL – ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). Works with the following Z-Wave certified hubs: SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera and more.
• HASSLE-FREE OPERATION – Control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual ON/OFF operation from the switch. Home automation is simple through custom scenes, versatile scheduling and convenient alerts.
• 3-WAY READY – The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12728 or 46200. Up to four add-on switches can be connected to the same device.
• FULL-HOME COVERAGE – Z-Wave Plus works with all previous Z-Wave generations to allow continued expansion of your home-automation network. The switch is capable of controlling indoor or outdoor fixtures for whole-home automation and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150ft. Extended signal range increases your home automation coverage to enhance your control.
• EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Wall plate not included. Works with all LED, CFL, incandescent and halogen bulbs as well as other devices. Operating temperature range 32-104 degrees Fahrenheit.

User questions & answers

Question:	Cam tbis dimmer switch be installed on a three way applic
Answer:	I don’t know I end up returning this item. Maybe directly with iDesign.
Question:	Is there a remote for this light switch
Answer:	it only fits the peg board shown in picture, I do not have that peg board, so I drilled holes in the back of he holder
Question:	Is this for exterior use? In a protected outlet box of course
Answer:	They come with dry wall screws and do require drilling
Question:	Can this switch be installed in an outside sealed box
Answer:	It’s not... I have the ikea board and these didn’t fit it.

Product features

GE Z-Wave Plus In-Wall Smart Switch – Toggle Style

Transform any home into a smart home with the GE Z-Wave Plus In-Wall Smart Switch. You can create custom scenes and schedule timed events either when you're at home or when you're away.

• Requires a Z-Wave certified gateway
• On/Off controls
• Requires in-wall installation with hard-wired connections.
• Wall plate not included
• NEUTRAL WIRE IS REQUIRED

Complete Control

Wireless control from smartphones, tablets, PCs and Z-Wave enabled remotes.

Ultimate Flexibility

Control your lights, fans and appliances, schedule a timed event or create a custom scene from anywhere in the world, at anytime of the day.

Works with All Bulbs

Compatible with all LED, CFL, halogen, incandescent, and other hard-wired devices.

Requires Neutral Wire

Replaces your current light switch and is easy to install using your home's existing wiring. 'Please ensure your home has a neutral wire before purchasing.

GE Enbrighten Z-Wave Family

GE Enbrighten provides a full line of z-wave products to make your entire home a smart home.

Product description

Smart switch on/off (Button with light ring) - 3 Wire no neutral. Power capacity: 1.5-amp.

• A SMART SWITCH FOR EVERYBODY IN THE HOUSE: The C by GE smart light switch allows you to control your lights through touch, C by GE mobile app, or voice assistant. With Google Home or Alexa, light switches from C by GE make light control easy
• C BY GE SMART LIGHT SWITCH: Get convenience and comfort with your smart bulbs and light switch always being ready to respond. With enhanced functionality like out of home control and scheduling, you will never come home to a dark house
• BUILD YOUR SMART HOME WITH SMART BULBS THAT WORK WITH ALEXA/GOOGLE HOME: C by GE smart bulbs and the smart switch work with voice and app control at all times, even when the wall switch is turned off
• MAKE TRADITIONAL LIGHT BULBS SMART BULBS: The C by GE wifi switch allows you to easily make your light bulbs compatible with Google Home or Amazon Alexa when paired with your smart devices
• EASY TO USE IN ANY HOME: This smart light switch works with most common residential wiring, and no neutral wire is required. DIY installation takes about 30 minutes for this smart switch for incandescent, halogen, and LED lights.

User questions & answers

Question:	If this is switched to the off position, will my automations still work? Or will that disconnect it like a regular household switch does
Answer:	Thanks for reaching out! The switch being in the off position will cause it to disconnect from the app which prevents automations from working. Feel free to reach out to us directly if you have any additional questions. -C by GE Support
Question:	Does the Paddle rest in the middle. So press up on the paddle to turn on and press down to turn off
Answer:	Great question! the bottom part of the paddle is the only part that would need to be pressed to operate the switch.
Question:	Will a pet set the motion detection sensor
Answer:	Depends on where your light switch located but my dog doesn't set it off. He is a 12 pound lap dog. I guess if you have a larger animal then maybe.
Question:	I have a ceiling fan, can this work with that as well? It has bulbs too
Answer:	If your ceiling fan and the lights attached to the ceiling fan are controlled by the same switch, this will not work as intended.

Product features

Make Traditional Bulbs Smart

Turns ordinary incandescent, halogen, and LED bulbs into smart bulbs and keeps smart control even when the switch is off.

Set Schedules

Schedule lights to turn on and off automatically.

Control Away From Home

Turn lights on or off from your phone when you’re not home.

Group Together

Group multiple switches and bulbs together and control all your lights from one switch.

Control With Your Voice

Command your lighting using just your voice when paired with Amazon Alexa or a Google Home/Nest Hub device.

Light Ring Indicator

Easily locate your switch in the dark.

No Hub Required for Out of Home and Voice Control

Connect directly to Google Home/Nest Hub and Amazon Alexa devices without a standalone bridge or hub.

Simple Do-It-Yourself Set Up

Easy to install with a few tools and about 30 minutes.

One Touch Wireless Whole Room Control

Install C by GE Smart Bulbs in other fixtures and set them up in the C by GE app to wirelessly control all your lights from one smart switch.

Works with Most Residential Wiring

Works in most homes, including older houses, with no neutral wire required.

Group Switches Without Travel Wires

Connect multiple switches without a travel wire. Control lights that aren’t wired on the same circuit, like controlling a kitchen light from your hallway.

Compatible with Single Pole and 3-Way Switch Applications

Fits in existing electrical boxes. Works with 3-way applications by replacing both switches with C by GE Smart Switches.

Product description

GE Push Button In-Wall Digital Countdown Timer Switch - NO Neutral Wire Required

• Replace your wall switch or spring-wound timer with this quiet push button digital timer - great for use with lights, exhaust fans, and heaters.
• Choose from the following preset countdowns: 5 min, 15 min, 30 min, 1 hour, 2 hour, or 4 hour.
• On/Off push button also allows you to turn the wired device ON or OFF without an end time.
• Compatible with incandescent, CFL and LED bulbs
• Blue LED indicator lights show last used preset (blinks every 20 seconds).
• LED lights will stay on when wired device is ON without an end time.
• Includes a single decor wall plate and fits most single or multi-gang rocker plates.
• Easy direct wire installation; DOES NOT require a neutral wire (Ground wire IS REQUIRED).
• Electrical Ratings – 125VAC 60 Hz: 6.4A Resistive, 800W Tungsten, 800VA Ballast, ¼ HP

• Replace your wall switch or spring-wound timer with this quiet push button digital countdown timer. Timer is great for use with lights, exhaust fans, and heaters. Compatible with incandescent, CFL and LED bulbs
• Choose from the following preset countdowns: 5 min, 15 min, 30 min, 1 hour, 2 hour, or 4 hour. On/Off push button also allows you to turn the wired device ON or OFF without an end time
• Blue LED indicator lights show last used preset (blinks every 20 seconds). LED lights will stay on when wired device is ON without an end time
• Includes a single decor wall plate and fits most single or multi-gang rocker plates
• Easy direct wire installation; DOES NOT require a neutral wire (Ground wire IS REQUIRED). Ratings – 125VAC 60 Hz: 6.4A Resistive, 800W Tungsten, 800VA Ballast, 1/4 HP

User questions & answers

Question:	I want to control a gas fire place in a rental condo. I like the max 4 hr setting but I dont like the on/off overide That defeats the timer control
Answer:	Yes
Question:	Can this timer be use for a bathroom heater
Answer:	I’m always able to make returns when I purchase anything on amazon. If you’re return date has closed try calling them and explain the situation, they’re always helpful.
Question:	How does the manual over ride work if I want the timer to not be used? Can it be set as the default
Answer:	There is a top to this soda can organizer and you can easily stack two rows of cans and the top fits nicely. However, I find the top to loose fitting to place another on top. I do use the top to place light or small items, like yogurts, some leftovers that have been placed in ziplocs. Nothing heavy.
Question:	What is the vampire load of this unit when in standby mode? Supposedly it has to "charge up" - does it do that all the time? What's the trickle load
Answer:	I haven't tried putting it in the dishwasher. I wouldn't buy this organizer again, in fact I'm thinking looking for a replacement. The cover WILL NOT stay on it! I may try to install some hardware to keep it on but, it is absolutely no good if you expect a cover on it.

Product features

Easy Direct Wire Installation

The in-wall countdown timer has an easy direct wire installation, making it easy for you to replace your wall switch.

Fits Single/Multi-Gang Rocker Plates

This countdown timer includes a single decor wall plate and fits most single or multi-gang rocker plates.

6 Countdown Presets

With 6 countdown preset options, you can choose from 5 min. up to 4 hours to shut off device at desired time.

No Neutral Wire Needed

No neutral wire is need to install, but a ground wire is required.

In-Wall Countdown Versatility and Uses

Turn lights ON/OFF with this countdown timer to help keep your home secure. By automating your lights, this timer gives your home a lived-in appearance even when you are away.

Compatible with LED, CFL and incandescent bulbs, the timer supports a wide range of plug-in lighting.

The timer’s versatility is not limited to lights. It can also be used for ceiling fans, exhaust fans, heaters and more. The timer is rated for 125VAC/60Hz and UL certified.

Easy Installation

1. Shut off power to fuse box or circuit breaker before installation.
2. Remove wall plate and existing single pole switch, if applicable.
3. Strip building wire to 3/8”.
4. Connect wires using the provided twist-on connectors.
5. Tuck the wires into the box leaving enough room for the timer then mount using screws provided and screw wall plate into place.
6. Restore power at fuse box or circuit breaker.

Operation

For timed switching, simply press the 5, 15, 30 min., or the 1, 2, 4 hour pad on the face of the timer.

To turn lights on with no end time push and hold big button for 3 seconds. Lights will stay on until big button is pressed to turn off lights.

Product description

Expand your control with the GE-branded Enbrighten Z-Wave Plus Plug-in Smart Switch. When paired with a compatible hub, the smart switch operates lighting, fans, pumps and more through individual commands and programmed settings. Wirelessly control and schedule indoor fixtures for effortless management of your home. Your automation possibilities are seemingly infinite when connected to hubs from Wink, SmartThings, HomeSeer, Vera, Nexia and more.

• VOICE CONTROL – ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). Works with the following Z-Wave certified hubs: SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, HomeSeer, Vera and more.
• HASSLE-FREE OPERATION – Control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual ON/OFF operation from the switch. Home automation is simple through custom scenes, versatile scheduling and convenient alerts.
• DUAL OUTLETS – Wirelessly schedule and control two lamps or small appliances together from anywhere at any time with any mobile device. The smart switch contains two grounded Z-Wave-controlled outlets allowing remote operation of two devices at the same time (cannot be controlled individually).
• FULL-HOME COVERAGE – Z-Wave Plus works with all previous Z-Wave generations to allow continued expansion of your smart-home network. The switch is capable of controlling indoor fixtures for whole-home automation.
• EASY INSTALLATION – No wiring required. Simply plug in the device and connect to your hub for convienient ON/OFF functions. Space-saving design leaves second outlet free for continued use and easily fits behind furniture. Works with all LED, CFL, incandescent and halogen bulbs as well as other devices. Operating temperature range 32-104 degrees Fahrenheit.

User questions & answers

Question:	Does this work with ADT pulse
Answer:	Sort of. For the price, as a DIY part, this is the best z-wave outdoor switch I found. If you plug this switch into an "in-service" outdoor receptacle, and you fully close that receptacle cover over the switch cable, and the GE z-wave switch receptacle is facing downward, and the location is away from water spray, as from a lawn sprinkler, then the conditions are safely within the IP rating of the GE switch. IP 44 is suitable for an occasional splash of water. IP 65 is ok for a spray or jet of water.
Question:	Does it work with 220V
Answer:	The back of this product lists the electrical rating for various load types: 600W incandescent, 1/2 HP motor, or 1800W resistive. Therefore, the answer to your question is yes, this can switch your space heater on and off. However, Jasco's response is a good one to keep in mind - don't use this if there is a risk of causing harm. If your space heater can automatically shut off if it detects a problem, like the curtains next to it have caught fire, then go ahead. I would otherwise suggest some form of failsafe (like a mechanical timer to turn off the space heater after 30 minutes), or not using a smart switch.
Question:	Are the outlets switched separately? Or are the both on/off together only
Answer:	Maximum temperature of the GE 14284 is 104° F
Question:	What is the amp capacity? I want to connect a 12 amp heater
Answer:	The bottom holes would be large enough for thick scarves as long as not too thick. The infinity scarves probably would have to go in the bottom holes as well. I hope it works out for you.

Product features

Enbrighten Z-Wave Plus Dual Outlet Smart Plug- 2 Grounded Outlets

Wirelessly schedule and control two lamps or small appliances separately or together from anywhere, at any time with any mobile device - space-saving design does not block second outlet or obstruct furniture placement.

Ultimate Flexibility

Control your lights, small fans and other appliances, schedule a timed event, create a custom scene from anywhere in the world, at any time of the day, and charge your mobile devices from your smartphones, tablets, PCs and Z-Wave enabled remotes.

2 Grounded Outlets and Manual On/Off Button

Smart Plug features two grounded outlets that are controlled together (not individually controlled)

Manual On/Off physical button is located on the top of the plug in module.

Works with Appliances and Lighting

Smart Plug is ideal for lamps and small appliances such as fans, heaters, coffee makers, etc.

• Ideal for living rooms and bedrooms

Compatible with CFL, LED, incandescent, halogen lighting and other small devices like fans and lamps

Space Saving Design

When plugged in to the top outlet of your standard wall outlet this smart plug will not block access to the bottom outlet.

Outlets are located on the left and right side of the plug-in allowing for ease of use behind furniture like tables, couches, and beds.

Enbrighten Z-Wave Family of Products

Enbrighten provides a full line of Z-Wave products to make your whole home a smart home.

Product description

Open the door to home automation with the GE-branded Z-Wave Hinge Pin Smart Door Sensor. When paired with a compatible hub, the smart sensor triggers events and sends alerts when a door opens or closes. Remote monitoring also increases convenience and peace of mind. Your automation possibilities are seemingly infinite when connected to hubs from Wink, SmartThings, Nexin, Trane and more.

• REQUIRES A Z-WAVE CERTIFIED GATEWAY - Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, Honeywell, Home Seer, Vera, Trane, Nexia, and ADT Pulse.
• TRIGGER AUTOMATIONS – The sensor communicates with a compatible hub to initiate desired actions of Z-Wave devices. Increase peace of mind by automatically turning on lights, sending notifications to your phone and more when a door opens or closes.
• SIMPLE & REVERSIBLE INSTALLATION – To adapt to various trim styles and activation preferences, the sensor allows easy calibration. The arm adjusts to fit properly and function as desired. In addition to supporting all indoor, standard door hinges with removable pins, the sensor is reversible to accommodate left- or right-opening doors. LED indicator displays status and provides feedback during programming. It also serves as a notification if tampering with the sensor occurs.
• LONG-LIFE BATTERY – An included CR2 battery powers the sensor for up to 2 years. The long-lasting battery provides worry-free, reliable operation. As a battery-powered Z-Wave device, the sensor is not a signal repeater.
• COLOR MATCH – In addition to a complementary design that blends into its surroundings, easy-to-install covers allow the sensor to match any door color or decor. Silver, dark brown and paintable replacement kits are also available.

User questions & answers

Question:	Right -hinge installed right side door (facing door) & inside swing (door opens to you) rsis, door swings outside=rsos. alarm works-what door swing
Answer:	Beleive they have door which opens to the outside. Florida homes have these for hurricanes. Hinge is inside but door swings out yet hinge pin is inside.
Question:	Does this act as zwave extender
Answer:	Only "Lines Powered" devices (plugged in or installed permanently to your homes electricity) will work as Z-Wave Repeaters or extenders. It is a Z-Wave requirement that all "Lines Powered" devices must repeat the Z-Wave network. Battery operated devices like this GE 32563 cannot repeat the network because their battery life would be used up in a matter of hours constantly listening for Z-Wave traffic to relay.
Question:	Does this require the door to be completely closed to register as closed
Answer:	Not really. The long arm you see in the pic rests against the door and is "calibrated" by pulling it off and putting it back down in a different position. There's a set of splines which give probably about a 10 degree precision. On our door the splines don't allow for it to be that accurate and the door can be unlatched and still register as closed. I imagine you could shim up the end of the arm to get it as precise as you wanted, but I'm not sure about the tolerances of the internal switch mechanism (i.e. if you got it so it was very precise when it was closed, would it then go back to closed once opened, or would it have to go past the previous position to trigger the switch).
Question:	Will this simply just open and close the door
Answer:	No, this is a sensor to let you know when your door has been opened. It's for monitoring in case of a break-in while you are away. It sends you a text saying your door has been opened.

Product features

GE Enbrighten Z-Wave Smart Door Sensor

Open the door to home automation with the GE-branded Z-Wave Hinge Pin Smart Door Sensor. When paired with a compatible hub, the smart sensor triggers events and sends alerts when a door opens or closes. Remote monitoring also increases convenience and peace of mind. Your automation possibilities are seemingly infinite when connected to hubs from Wink, SmartThings, Nexia, Trane and more.

Ready to Use for Left-Opening Door

The hinge pin door sensor is already set up for LEFT-opening doors. You will need to adjust the sensor if your door opens to the right.

Step 1

• Remove metal assembly with a short twist counterclockwise.
• Remove the screw and cap to reveal the gear. Lift the arm and place it aside for later.

Step 2

• Remove the gear and flip it upside down.
• Once the gear is flipped and put in place, turn the assembly 180 degrees sideways. The text should now read "Right".

Step 3

• Place the arm back by aligning the dots (see figure above).
• Replace the cap and secure with the screw.

Step 4

• Add the metal upper to the main body by aligning the two reference points.
• Re-attach the metal assembly with a short twist clockwise.

Ultimate Flexibility

Control your lights, fans and appliances, schedule a timed event or create a custom scene from anywhere in the world, at any time of the day, from your smartphones, tablets, PCs and Z-Wave enabled remotes.

Battery Compartment

Requires 1 CR2 lithium battery (included). Make sure to remove the plastic protector before installing.

Color Options

Color-match kits are available to match your home's decor. Color options are Silver, Dark Brown, and Paintable.

GE Enbrighten Z-Wave Family of Products

GE Enbrighten provides a full line of Z-Wave products to make your whole home a smart home.