12 best replacement clock movements
Replacement clock movements are essential components used to repair or upgrade the timekeeping mechanism of a clock. These movements are designed to replace the internal workings of a clock, including the clock's motor, gears, and hands. Here's what you need to know about replacement clock movements:
Purpose: Replacement clock movements are used when the original clock mechanism becomes faulty, worn out, or needs to be updated for improved accuracy or additional features. They are commonly used in various types of clocks, including wall clocks, mantel clocks, grandfather clocks, and even some decorative or novelty clocks.
Types of Clock Movements:
Quartz Movements: Quartz clock movements are the most common type of replacement movements. They are highly accurate and operate using a battery-powered quartz crystal oscillator. Quartz movements are known for their reliability and low maintenance requirements. They are often used in modern clocks.
Mechanical Movements: Mechanical clock movements are traditional, spring-driven movements. They require winding to operate and are often found in antique and vintage clocks.Replacement mechanical movements are less common and may require more specialized knowledge for installation and maintenance.
Compatibility: When selecting a replacement clock movement, it's crucial to ensure compatibility with the clock's case and dial. Movements come in various sizes, shaft lengths, and hand styles, so you should measure the existing movement or consult the clock's manufacturer or a specialist to find a suitable replacement.
Installation: Installing a replacement clock movement can vary in complexity depending on the type of clock and the expertise of the person performing the replacement. It typically involves removing the clock hands, dial, and old movement, then fitting the new movement in place. Follow the manufacturer's instructions carefully, and consider seeking professional assistance if you're unsure.
Hands and Dial: Replacement movements often come with clock hands, but you may also need to consider the style and size of hands that match your clock's design. Additionally, you may need to adapt or replace the clock's dial to fit the new movement properly.
Accuracy: Quartz movements are known for their accuracy, typically losing or gaining only a few seconds per month. Mechanical movements can be less precise and may require more frequent adjustments.
Maintenance: Quartz movements are low-maintenance and may only require occasional battery replacement. Mechanical movements, on the other hand, may need periodic winding, lubrication, and maintenance by a skilled horologist.
Features: Some replacement clock movements offer additional features, such as chime or strike functions, pendulum compatibility, and multiple time zone settings. Choose a movement that aligns with your clock's intended use and desired features.
Safety: When working with clock movements, be careful not to damage the delicate components, especially the clock hands and escapement mechanism. Avoid touching the clock movement's internals with bare hands, as oils from your skin can affect its operation.
In summary, replacement clock movements are crucial for restoring or upgrading the timekeeping function of various types of clocks. When selecting a replacement movement, consider factors like compatibility, installation requirements, accuracy, maintenance, and any desired additional features. Proper installation and care will help ensure your clock keeps accurate time for years to come.
Below you can find our editor's choice of the best replacement clock movements on the marketReplacement clock movements are components used to repair or replace the internal mechanisms of clocks. They are commonly found in the "Clock Movements" section of hardware stores, online retailers, or specialty clock parts suppliers. Here are some key points about replacement clock movements:
Purpose: Replacement clock movements are designed to breathe new life into old or malfunctioning clocks. When the internal mechanism of a clock becomes damaged or worn out, replacing the clock movement can restore its functionality.
Types: There are various types of clock movements, including quartz and mechanical movements.
Quartz Movements: These are battery-powered and are known for their accuracy and low maintenance. They are commonly used in modern clocks and are available in various sizes to fit different clock faces.
Mechanical Movements: These are traditional clock movements that rely on winding mechanisms. They can be further categorized into spring-driven and weight-driven movements.Mechanical movements are often used in antique or vintage clocks.
Sizing: When purchasing a replacement clock movement, it's crucial to select one that matches the size and style of the existing movement. The measurement of the shaft length is essential to ensure that the clock hands fit properly.
Hands and Dials: Replacement clock movements often come with a set of clock hands, and they may or may not include a clock dial. Make sure to check the package contents to determine if additional components are needed.
Installation: Installing a replacement clock movement requires some basic tools and mechanical skills. Most movements come with installation instructions. It typically involves removing the old movement, inserting the new one, attaching the clock hands, and setting the time.
Maintenance: Quartz clock movements are relatively low-maintenance, requiring periodic battery replacement. Mechanical movements may require periodic winding and occasional maintenance to keep them in good working condition.
Availability: You can find replacement clock movements in various sizes and types at hardware stores, clock shops, and online retailers specializing in clock parts and accessories.
Customization: Replacement clock movements offer an opportunity to customize the appearance and functionality of your clock. You can choose movements with different features, such as silent sweep second hands or chime options.
When searching for a replacement clock movement, it's important to provide accurate measurements and consider the style and features you desire to ensure a successful repair or upgrade of your clock.
Below you can find our editor's choice of the best replacement clock movements on the market
Include Hands Quartz DIY 12888 Wall Clock Movement Mechanism Battery Operated DIY Repair Parts Replacement
TIKROUND
- Long spindle quartz clock replacement movement parts with metal hook,Good for repairing, replacing or making a clock.
- Parameter: "I" Shaft,drive long clock hands (10 mm to 450 mm); Total shaft length is 18 mm (45/64 inch), thread length is 5 mm (13/64 inch),suitable for 1-3 mm ( 3/64 - 7/64 inch ) thickness clock panel.
- DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames.
- Package contents: 1 clock movement with 1 hooks,2 Hour hands,2 Minute hands and some mounting hardware, coming with specially designed box and instructions.
- Warm notice: when you install them, please keep the hour hand and minute hand parallel; And please do not use too much pressure to avoid bending them.
User questions & answers
| Question: | What is the size of the mechanism case and thickness |
| Answer: | IT'S about 2 1/2 inches square and one inch thick. I couldn't get into work in my very large clock. |
| Question: | Is this a silent clock |
| Answer: | Ticks like a typical quartz clock |
| Question: | how long are the hands |
| Answer: | The hour hand is 1 3/4" and the minute hand is 2 3/4" from the outer edge of the circle to the point of the tip. One thing to note about this, is that it does not come with a seconds hand. |
| Question: | Do you have quartz movement for table clock with a 3" clock face; hands: hour-28mm; minute - 32 mm; & second hand - 42 mm. 2" x 2" x 1/2" case |
| Answer: | You're going to need to order by the diameter and length of the shafts the hands mount onto. Not based on the length of the hands. |
| Question: | does it come in polished brass |
| Answer: | Yes it does come in polished brass. |
| Question: | Does it support remote |
| Answer: | No, it doesn't support remote |
| Question: | Does this work with alexa |
| Answer: | No it doesn’t. |
| Question: | it is auto lock |
| Answer: | Yes, it will auto lock after 10 seconds. There is a switch to turn the auto lock on and off. |
Product features
MiLocks TKK-02SN Tkk-Sn Digital Door Knob Lock with Electronic Keypad for Interior Doors, Satin Nickel
Bring new excitement and convenience to your home with this keypad entry door knob by MiLocks. This keyless entry door knob is recommended for interior doors and installs just as easy on both left handed doors and right handed doors 1 1/4"- 1 7/8" thick. You will discover how useful it is to simply use a code instead of a key. Places like bedrooms, home offices and supply closets are doors you should be able to lock. Using a code is much more practical than using a key for these type of doors. In addition to adding individual users, you can also program a master code to multiple door locks, a valuable feature for property management. The backlit keypad easily lights up with the push of a button and facilitates operation in the night time. It includes an adjustable latch with 2 different backset settings of 2 3/8" and 2 3/4" and features audible tones when locking, unlocking, and low battery warning. Operates on 4 "AA" batteries which are not included.
Installation Steps
1.Place metal hook over shaft.
2.Place plastic washer over shaft.
3.Insert shaft through clock face.
4.Place dial plate brass washer over shaft.
5.Attach dail fixing brass hex nut.
6.Gently press hour hand onto shaft at 12:00 postion.
7.Place minute hand over shaft at 12:00 postion.
8.Gently screw minute nut in place.
How to get the right replacement
A- Thread length: 5 mm (13/64 inch)
B- Total shaft length is 18 mm (45/64 inch)
Measure the thread shaft of your old clock mechanism, if the length is shorter or equal to 6 mm, then this clock movement mechanism is suitable for your clock.
We have 3 different shaft length movements
If you want to replace your old movement, carefully measure the movement shaft length.
If you still can't confirm which one is right for you.Please refer to our picture,take a photo of shaft part and send to us,We will help you confirm.
I" Shaft Clock Movement
Please compare the hole of your own hands
to shape of this clock mechanism thread.
This movement is "I" Shaft With Rounded Rectangle shape .
JJDD High Torque Clock Replacement Movement,Clock Movement Metal Clock Needle Kit,31MM Long DIY Repair Quartz Wall Clock Movement,8 PCS
Product description
Specifications:
Movement shaft length: total shaft length 31mm, thread height 24mm, suitable for panel thickness of about 20mm.
Product Name:High Torque Clock Replacement Movement
Material: aluminum
Total Hour Hand Length: approx. 75 mm (3.0 inches)
Total Minute Hand Length: approx. 104 mm (4.1 inches)
Total Second Hand Length: approx. 136 mm (5.3 inches)
Type: Jump seconds
Crystal Frequency: 32.768KHz
Travel Time Accuracy: ±30Sec/Month (1.5V DC. 25°C)
Current Consumption: Less than 130μA (1.5V DC.)
Working Voltage: 1.3v to 1.7v
Operating temperature: -10℃to50℃
Feature:
1.Made of aluminum,it is wear-resistant, rust-proof, corrosion-resistant, durable and can be used for long time.
2.Ideal for DIY quartz wall clock replacement movement, etc. Also
suitable for cross stitch, three-dimensional embroidery, craft clock, frameless clock.
Tips:There are some watch parts made of aluminum.Please do not
install them with too much pressure, otherwise they will bend.
Package include:
1 x Quartz clock movement
1 x Second hand
1 x Minute hand(gold)
1 x Hour hand(gold)
1 x Plastic washer
1 x Brass washer
1 x Brass nut
1 x Minute nut
Note:
Due to light shooting and different displays may cause the color of the item in the picture
a little different from the real thing.Please understand! The measurement allowed error is +/- 1-5mm.
- 🍓🍓Applicable Scope: It is very suitable for DIY quartz wall clock replacement movement, etc. It is also suitable for cross stitch, three-dimensional embroidery, craft clock, frameless clock.
- 🍓🍓Movement Size: Shaft length is 31 mm (1-1/ 5 inch); Thread length is 24 mm (24/ 25 inch); Jump second movement, suitable for about 20 mm (4/ 5 inch) thickness clock panel.
- 🍓🍓Material: The hour and minute hands are made of aluminum, which is wear-resistant, rust-proof, corrosion-resistant, durable and long-lasting.
- 🍓🍓Hands length: total hour hand length: about 75 mm (3.0 inches); Total minute hand length: about 104 mm (4.1 inches); Total second hand length: about 136 mm (5.3 inches).
- 🍓🍓JJDD is focused on providing high quality products and first class service at a reasonable price. A three-month warranty is provided to you. If you are not satisfied with our products,please feel free to contact us and we will resend or refund.
User questions & answers
| Question: | if NO battery required. Where does it power to operate |
| Answer: | You have to use one double A battery. |
| Question: | Does this movement make a ticking sound |
| Answer: | No. |
| Question: | Is triangle piece at top removable. In other words, I need the movement to be square |
| Answer: | Unless you are planning to hang the clock by the square piece it is not a necessary piece for the movement to work. |
ULTNICE Quartz Clock Mechanism Battery Operated DIY Wall Clock Movement Repair Parts
ULTNICE
Product description
Description
This item made by premium material for durable and long lasting use. When your original clock has some problem in its movement, then you can use this clock mechanism to replace it to save your cost. For DIY quartz wall clock replacement.
Feature
-Size: 6.5 X 6.5 X 1.5 cm/ 2.2 X 2.2 X 0.6 in
Shaft length: 1.2 cm/0.5 in ,Screw thread length: 0.5 cm/0.2 in.
-Color: As shown.
-Material: ABS.
-For repairing, replacing or making a clock.
-For DIY quartz wall clock replacement movement part, applicable frameless 3D Wall clock.
-Made of high quality material, it is durable and long lasting use. -Powered by 1 AA battery (not included).
-Warm Tip: Dear buyer, due to lighting effect, monitor's brightness, manual measurement, etc., there could be some slight differences in the color and size between the photo and the actual item. Sincerely hope that you can understand. Thank you.
Specification
-Minute hand shaft length: 14mm.
-Hour hand shaft length: 10.8mm.
-Minute hand shaft diameter: 3.7mm.
-Hour hand shaft diameter: 5.5mm.
Package Including
1 x Quartz DIY Wall Clock Movement.
- Size About : 5.6 x 5.6 x 1.5cm/2.2 x 2.2 x 0.6inch. Minute Shaft Length: 14mm. Hour Shaft Length: 10.8mm.
- Diameter : The Minute Shaft Diameter is 3.6-3.7mm, and the Hour Shaft Diameter is 5.5mm. Screw Shaft Diameter 7.6mm.
- For DIY quartz wall clock replacement movement part, applicable framless 3D Wall clock. The error is less than +-1.5 seconds/day, and the power consumption is less than 200 microamps.
- Powered by 1 AA battery(Not Included, You can use No.5 AA batteries, carbon batteries, alkaline batteries. Cannot Use Rechargeable Batteries).
- Warm Tip : This model is an ordinary shaft of 5mm, which is suitable for clocks whose backplane thickness does not exceed 4mm, otherwise the nuts on the front cannot be tightened. （Due to different measuring tools and measuring methods, the measured length may be slightly different from the actual, thank you for your understanding ! ! !）
User questions & answers
| Question: | Is this a silent clock monument mechanism ? I am looking for a clock mechanism where I can hear the seconds tic-tac |
| Answer: | yes, sound , not silent |
| Question: | my melodies motion clock continues to play music what part needs to be change |
| Answer: | Hello,you can check the battery first |
| Question: | How accurate is it |
| Answer: | Mine is very accurate. No complaints |
| Question: | how long is the shaft NOT the demension of the movement |
| Answer: | Very short. Just fits through clock face. My guess is that is less than a quarter of an inch. |
EMOON Clock Movement Mechanism with 3 Pack Clock Hands, Silent Sweep Quartz Clock Motor Kit, for Clock Repair DIY Replacement, Custom Clock
EMOON
Product description
Description
This is a big bonus of a clock movement with 3 pack stylish clock hands kit from EMOON for you to get to pick out the style that look best to keep your favorite clocks running at no additional charge. The compact "AA" battery powered high torque motor allows you to make the giant wall clock of your dreams. With EMOON clock hands & mechanism combo that provides quick and easy fix for your clock, you too can be a clock maker. Save an expensive clock and it is now running again in your house with wonderful memories.
Specifications
Material: Plastic, Brass and Aluminum
Colors: Black, gold
Shaft Diameter: 3/8 in
Threaded Shaft Length:7/16 in
Overall Shaft Length:3/4 in
Style1 Hour/Minute/Second Hand Length (from the center of the hole to the end): approx.(3 5/8 in)/(4 1/2 in) /(3 7/8 in)
Style2 Hour/Minute/second Hand Length (from the center of the hole to the end): approx.(2 1/4 in)/(3 3/8 in)/(3 7/8 in)
Style3 Hour/Minute Hand Length (from the center of the hole to the end): approx.(2 1/4 in)/(3 3/8 in)
Second Cap Nut: approx. 1/4 in
Case Size: approx. 2 1/4 in L x 2 1/4 in W x 5/8 in H
Second Hand Motion: Sweeping
Battery: One 1.5V AA Carbon battery (not included)
Package Content
1 x EMOON quartz clock movement
3 x Minute hand
3 x Hour hand
2 x Second hand
1 x Second cap nut
1 x Rubber gasket
1 x Brass washer
1 x Brass hex nut
1 x Metal hook
1 x Mounting hook
1 x User manual
EMOON Notes
- The hour and minute hands had a protective plastic coating that needs to be carefully removed.
- Be careful not to bend the hands with too much pressure.
- Please do not use Alkaline battery, rechargeable battery, or they will damage the movement.
- Do not tighten the brass hex nut too tight
- Press hard to get all clock hands in place
- Check if all hands are aligned
- Total Shaft Length:3/4 In, Thread Length:7/16 In, Please According to Picture 4 to Choose the Right Size
- PACKAGED WITH CARE: Comes as a clock movement with 3 pack hands kit in a presentation box with custom foam inserts to protect all from scratching, bending, and other damage while shipping
- CHOOSE THE SUITABLE MECHANISM: this kit fit clock dials from 1/8 in - 1/4 in thick and is perfect for clock hands under 8 1/4 in long, making you smile of the memories your old clock gives you
- DECORATIVE CLOCK HANDS: Ornate sets for different options, perfect for your clock creations; get to pick out the style and length of the hands that look best with your clock at no additional charge
- ACCURATE TIME-KEEPING & QUIET MOTOR: features EMOON high precision clock mechanism, which offers watchmaker's accuracy and dependability; equipped with sweeping motion, no ticking; powered by a AA battery
- KEEP TIME IN STYLE: With EMOON clock hands and mechanism combo, you too can be a clockmaker; perfect for clock replacement, repairing all kinds of clocks, or making your own customized clock project
User questions & answers
| Question: | I want to use this on a 3/4" piece of wood...will this work |
| Answer: | I think you would need to go up to 1". As this is just 3/4" and the wood is 3/4" the hands wouldn't be able to move well, if at all. |
| Question: | I'm making a clock and the directions say"with 11/16"diameter stem and hands." Will this clock mechanism work? Which size should I buy |
| Answer: | You must mean length of stem rather than diameter- 11/16” is almost 3/4” of an inch. Length of stem will depend on face thickness and distance from exterior face of clock to motor face. |
| Question: | Is the case 54 mm by 54 mm square? If not, it will be too large to fit my clock |
| Answer: | yes |
| Question: | I see dimensions for the width and height of motor. but how thick is the motor |
| Answer: | It's about 1/2" thick. When you place the hands on the motor, align both of them on the 12 when putting them on the shafts. Then you can adjust the time using the dial on the back of the motor. NEVER try to adjust the time of the clock using the hands. That will break the motor. I liked the choice of different hands. You can pick the hands that you think best fit the size/style of the clock face. |
TIKROUND Original Youngtown 12888 Movement for Clock Repair Replacement 14.5mm Shaft Length 7mm Thread Length (NO Hands)
TIKROUND
Product description
Features:
Easy and simple design
Suitable for repairing, replacing or making a clock
Material: plastic and aluminum
Second hand motion: Sweep
Accuracy Within ±30seconds deviation each month (in normal temperature)
Battery: one 1.5V Carbon-zinc batteries only,not included.
Please don't use the alkaline batterires,whose high current output will damage the clock mechanism, because the mechanism is low power consumption. So it is recommended you to use an ordinary carbon battery.
Dimensions:
Case size: approx. 56 x 56 x 16 mm (2.2 x 2.2 x 0.65 inches)
Package included:
1 x Quartz clock movement
1 x Plastic washer
1 x Brass washer
1 x Brass nut
- Good for repairing, replacing or making a clock.Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.
- Youngtown manufactures the 12888 series in various models,Please check the dimensions of this movement prior to purchase to verify the dimensions.
- Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.INSTRUCTIONS - Included along with the movements.
- Clock mechanism size: total shaft length is 14.5 mm (37/64 inch), thread length is 7 mm (9/32 inch).
- Sweep silent movement, suitable for 1-4 mm ( 3/32 - 5/32 inch ) thickness clock panel.
User questions & answers
| Question: | HD-1688 clock face and mechanism repair kit |
| Answer: | Repair as in replacement of the entire movement, but not components internal to the movement. |
| Question: | Can you tell me which hands to order for this mechanism |
| Answer: | The choice of hands is entirely subjective. The diameter of the dial,the style of the clock, color, etc. Just be sure to measure the diameter of the hour and minute tubes and the seconds shaft to be sure they will fit. |
| Question: | Can any tell me what set of hands I can purchase to fit this movement (12888)? I need a black set with the minute hand about 5 1/2 inches long |
| Answer: | Sorry. I bought the wrong one and waited too long to return. |
| Question: | Does this come with both the white and black shaft? I need the black shaft but don’t see a way to specify |
| Answer: | Mine came with white shaft only. It hardly shows when the hands are on. Get the right length shaft. |
Product features
Original Youngtown 12888 Clock Mechanism
Youngtown 12888 world renowed.
High standard craftsmanshaip.
Classic Sun Logo
Recognize the Sun Logo to buy genuine.
Setup-time Gear
The time can be set by turning the time-set knob on the back of the clock movement.
Model No.
Quality assured.
How to choose the suitable clock mechanism
Measure the thread shaft of your old clock mechanism, if the length is shorter or equal to 12mm, then this clock movement mechanism is suitable for your clock.
Warm tips:
- Measure the thread shaft color of your old clock mechanism.
- The black shaft diameter is bigger than the white shaft.
Black Shaft:
- Hour ShaftΦ: 5.57mm.
- Minute ShaftΦ: 3.63mm.
- Second ShaftΦ: 0.94mm.
White Shaft:
- Hour ShaftΦ: 5.05mm.
- Minute ShaftΦ: 3.17mm.
- Second ShaftΦ: 0.84mm.
2 Pieces 3D Clock Movements DIY Large Quartz Wall Clock Mechanism Replacement with 4 Pair Hands Clock Movement Kit for Clock Repair DIY Home Art Decor (Black)
Product description
Product description:
Humanized kit design:
The DIY large clock mechanism contains 2 pieces 3D clock movements and 4 pairs of different style clock hands in different styles and length, so you can match the parts according to actual need to create your own personalized clock craft, which is humanized and convenient for use.
Specifications:
Material: aluminum, metal
Color: as shown in the picture
Size:
Clock dial diameter:10 cm/ 3.94 in
Clock dial thickness: 2 cm/ 0.79 in
Style 1: hour/ minute hand length (from the center of the hole to the end): approx 10/ 13 cm (3.94/ 5.12 in)
Style 2: hour/ minute hand length (from the center of the hole to the end): approx 9.2/ 13 cm(3.62/ 5.12 in)
Style 3: hour/ minute hand length (from the center of the hole to the end): approx 14/ 19 cm(5.51/ 7.48 in)
Style 4: hour/ minute hand length (from the center of the hole to the end): approx 13/ 19.5 cm(5.12/ 7.68 in)
Second hand motion: sweeping
Battery: one 1.5V AA Carbon battery (not included)
Package includes:
2 x Quartz clock movements
2 x Clock dial
4 x Minute hands
4 x Hour hands
2 x Second cap nuts
2 x Rubber gaskets
2 x Brass washers
2 x Brass hex nuts
Notes:
The hour and minute hands had a protective plastic coating that needs to be carefully removed.
Be careful not to bend the hands with too much pressure.
Please do not use alkaline battery, rechargeable battery, or they will damage the movement.
Do not tighten the brass hex nut too tight.
Press hard to get all clock hands in place.
Check if all hands are aligned.
Please allow slight dimension error due to manual measurement.
Please allow slight color difference due to different monitor.
- Complete clock movement kit: this beautiful clock movement set includes 2 pieces 3D clock movements and 4 pairs of different style clock hands, allowing you to DIY frameless clock, small wall clock, your own special craft clock, family picture wall clock, etc.
- Choose the right size at will: hour hand of style 1 measures approx. 3.94 in, minute hand measures approx. 5.12 in; The hour hand of style 2 measures approx. 3.62 in, minute hand measures approx. 5.12 in; The hour hand of style 3 measures approx. 5.51 in, minute hand measures approx. 7.48 in; The hour hand of style 4 measures approx. 5.12 in, minute hand measures approx. 7.68 in; Please check the size details before buying in case of unfit situation
- Accurate time keeping and quiet motor: the sweep clock mechanism set offers great accuracy and dependability, which is equipped with sweeping motion, no ticking and will provide you with a quiet environment
- Wide application: these clock repair replacement parts are proper for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable to be applied as DIY quartz wall clock replacement movement parts
- 4 Different styles of hands: this clock movement DIY set comes with 4 pairs of clock hands in different styles and length for your options, so it is great for clock creations and repairs while also providing a decorative effect
Original Youngtown 12888 Pendulum Type Movement Step Clock Accessory Quartz DIY Movement Kits,1/2 Inch Maximum Dial Thickness, 9/10 Inch Total Shaft Length.
Product description
Features:
Easy and simple design.
Suitable for repairing, replacing or making a clock.
Material: plastic and aluminum.
Accuracy Within ±30seconds deviation each month (in normal temperature).
Second hand motion: Step.
Battery: one 1.5V Carbon-zinc batteries only,not included.
Please DO NOT USE Alkaline battery,Rechargeable batteries,they will damage the movement.
Max Pendulum Swing: 26°
Max Pendulum Weight: 40g
Max Pendulum Length: 35cm
Dimensions:
Case size: approx. 56 x 110 x 18 mm (2.2 x 3.3 x 0.7inches)
Hands Style 1:
Total hour hand length: approx. 89 mm (3.5 inches)
Total minute hand length: approx. 124 mm (4.8 inches)
Total second hand length: approx. 165 mm (6.5 inches)
Hands Style 2:
Total hour hand length: approx. 65 mm (2.56 inches)
Total minute hand length: approx. 91 mm (3.58 inches)
Total second hand length: approx. 140 mm (5.51 inches)
Package included:
1 x Quartz clock movement
2 x Second hand
2 x Minute hand
2 x Hour hand
1 X Second cap nut
1 X Rubber gasket
1 X Brass washer
1 X Brass nut
1 x Metal hook
1 x User manual
Warm notice:
.The hour and minute hands had a protective plastic coating that needs to be carefully removed.
.Be careful not to bend the hands with too much pressure.
.Please do not use Alkaline battery, rechargeable battery, or they will damage the movement.
.Do not tighten the brass hex nut too tight.
.Press hard to get all clock hands in place.
- Good for repairing, replacing or making a clock.
- Young town manufactures the 12888 series in various models,Please check the dimensions of this movement prior to purchase to verify the dimensions.
- .Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.INSTRUCTIONS - Included along with the movements.
- Pendulum type STEP movement, suitable for 9 - 13 mm (9/25 - 1/2 inches) thickness clock panel;Total shaft length: 23 mm ( 9/10 inches), thread length: 15.4 mm ( 3/5 inch).Max Pendulum Swing: 26°;Max Pendulum Weight: 40g ; Max Pendulum Length: 35cm.
- This clock doesn't contain hook, they can't hang directly; If the handle is too long, you can snip them as you want according to the size of the clock panel.
User questions & answers
| Question: | Where can I buy a pendulum for this? What kind of pendulum would fit this |
| Answer: | There are four models of pendulum that you can choose： https://www.amazon.com/dp/B079J5LGD9 |
| Question: | Is this movement silent or does it have a tick tock sound to it? The one I am replacing does and I like it |
| Answer: | The movement is silent. |
| Question: | Where do I get the pendulum |
| Answer: | This kit is for replacing the works in an existing Pendulum clock. The clock would have its own pendulum, which attaches onto the new kit |
| Question: | allen designs mixer wall clock with a cupcake pendulum the movement is cracked. i need to replace it. #hd1688. what movement should i purchase |
| Answer: | This is the one I purchased - it was a perfect replacement for the hd1688. Just gently lift off the hands on your original clock, remove the nut and pull out the movement, then replace it with the Youngtown 12888 and tighten the nut hand tight, then gently press the hands onto the movement spindle, add the battery and put the pendulum onto the pendulum hook. Set the time and it should work perfectly. |
Youngtown 12888 High Torque Long Shaft Clock Movement Mechanism with 12 Inch Long Spade Hands
TIKROUND
- Clock movement replacement: high torque clock with 2 hooks, long shaft, drive long clock hands (10 mm to 450 mm).
- Movement size: Total shaft length is 23 mm (29/32 inch), thread length is 12mm (15/32 inch),suitable for 4 - 8 mm (5/ 32 - 5/16 inches) thickness clock panel.
- Size from the hole center to the tip: the hour hand is approx. 203 mm/ 8.0 inches long; The minute hand is about 305 mm/ 12 inches in length.
- DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames.
- Warm notice: when you install them, please keep the hour hand and minute hand parallel; And please do not use too much pressure to avoid bending them.
User questions & answers
| Question: | i need two inch hour hand |
| Answer: | This hour hand is longer than 2” |
| Question: | Can I use alkaline batteries |
| Answer: | I do not remember instructions saying not to use alkaline. I just put in whatever battery I had laying around. |
| Question: | My clock face is thin galvanized, will this work |
| Answer: | Before you order: make sure of the diameter of your clock hole will accept this size. Also, measure your clocks face for use of this size hands. My first mechanized package didn’t work. If you like your clock, try it. |
| Question: | I have a mini Windmill that will be a clock. The center hole has a diameter of 1.25 inches, will the case/shaft secure properly with this size hole |
| Answer: | Trying to put pic on here. Guess not possible. My wall clock is 28" wide total width. The hole in the center is less than 1/2". Probably closer to 1/4". My guess is I am not understanding the question. Sorry. |
Seiko-SKP Quartz Clock Movement Kit with 5" Black Spade Hands for Dials up to 1/4"
Pulsar
Product description
Seiko-skp Quartz Movement for Clocks. The quartz movement features accurate and dependability timekeeper (accurate to +/- one second per day), movement size: 2 7/32" square 1/2" thick and fits in a 3" diameter hole. Movement is suitable for clock repair, restoration or clock making. The shaft diameter measures: 5/16". A pair of hands included 5" as shown. AA battery required. Clock movement: Maximum Dial Thickness 1/4" & Total Hand Shaft Length 5/8" Japanese Engineering and Quality Made in China.
- Clock Movement Quartz with Hands, Second Hand, and Wall Hanger
- Size: 2 1/8" Square
- Max Dial Thinkness 1/4"
- Threaded shaft length of 5/16", total shaft length of 5/8" Without Second Hand
- One set of hands & second hand included (Minute hand measures 5" from mounting hole to tip)
User questions & answers
| Question: | Any tick tock sound |
| Answer: | yes it has a tick tock sound |
| Question: | What are the lengths of the hour and minutes hands (from center point)? Thanks |
| Answer: | hour = 4" & minute = 5.25" |
| Question: | Where can I find the brackets they use to hang the clocks with? I have dozens of clocks already just need the brackets |
| Answer: | The seiko skp movement has a loop on top to hang by. If you need a hang bracket for top back of clock any hardware store or hobby lobby would ha e them |
TIKROUND Original Youngtown 12888 Movement for Clock Repair Replacement 37/64 inch Shaft Length 7mm Thread Length (NO Hands)
TIKROUND
User questions & answers
| Question: | what is the difference between the white and the black shaft. I cant find the white like mine, will the black make a huge difference |
| Answer: | The diameter of the black shaft is larger than the white's , they are suitable for different hole sizes of clock hands, so please choose the right movements according to the shaft's color to make sure your original hands could be used with our movements. |
| Question: | Will this motor accommodate a sweep second hand |
| Answer: | The one I received has a sweep second hand |
| Question: | Why are the shaft dimensions in mm but when you go to order they are in fraction |
| Answer: | So you can do the conversion if you wish. 1 mm = 0393701 in. |
| Question: | The photo states “no hands” the description says 3 sets of hands, which is it |
| Answer: | If you go to the item on Amazon, you have the option. No Hands, or 3 sets. I purchased no hands since I reused the one on the clock I have. |
Product features
Original Youngtown 12888 Clock Mechanism
Youngtown 12888 world renowed.
High standard craftsmanshaip.
Classic Sun Logo
Recognize the Sun Logo to buy genuine.
Setup-time Gear
The time can be set by turning the time-set knob on the back of the clock movement.
Model No.
Quality assured.
How to choose the suitable clock mechanism
Measure the thread shaft of your old clock mechanism, if the length is shorter or equal to 7mm, then this clock movement mechanism is suitable for your clock.
Warm tips:
- Measure the thread shaft color of your old clock mechanism.
- The black shaft diameter is bigger than the white shaft.
Black Shaft:
- Hour Shaft Φ: 5.57mm.
- Minute Shaft Φ: 3.63mm.
- Second Shaft Φ: 0.94mm.
White Shaft:
- Hour Shaft Φ: 5.05mm.
- Minute Shaft Φ: 3.17mm.
- Second Shaft Φ: 0.84mm.
StFlyBro 2 Pieces Non Ticking Clock Movements with 4 Pack Different Size Clock Hands, DIY Repair Parts Replacement, 7/10in(18mm) Total Shaft Length and 2/5in(11mm) Thread Length, Battery Operated
StFlyBro
- The length of shaft is about 0.71in/18mm. Two Newest No Ticking Mechanisms. Double Insurance to make sure the clock work well and longer
- 4 of the most popular clock hands. Different Size and Styles. Meet different needs only in one package
- “CE” & ”RoHS” Approved Movement- Safety & Environmentally-Friendly. Two Years Quality Guaranty
- The Thickness of Clock Panel should be less than 0.3in/7.5mm. The Diameter of Clock Panel should be longer than 4.2in/10.6cm. The clock hands should be less than 7.9in / 200mm for this Clock Movement. If the minute hand longer than 5.9in/150mm, please only use 2 clock hand on it(Hour hand and Minute hand)
- Shockproof Package, Against Shipping Damage. Package include: Movement*2, Movement Accessories*2, Wall Nail*2, Metal Hook*2, Clock Hands Set *4, Instructions*1
User questions & answers
| Question: | company says carbon batteries, but clock says use alkaline. Which is it |
| Answer: | I am using alkaline and it is working fine. I read somewhere that using alkaline could shorten the life of the clock mechanism, but have not experienced that on any clock, and so far so good on this mechanism. |
| Question: | Can you add the second hand to any of the styles |
| Answer: | The Styles I received both had the option to add the second hand. It works very nice. Very accurate clock |
| Question: | Thank you all for answering my question. I have the hands in place, nicely parallel, the battery snapped in and nothing. No go. What now |
| Answer: | Not sure would have to see the hole you place the clock piece into. Maybe you have not slipped it all the way through the hole or you might have the hole too small. |
| Question: | Can i use my own clock hands? (just use the mechanism to replace an old one |
| Answer: | You should be able to, because the hands are friction mounted If you can push it onto the shaft, and it will stay, then it should work |
Product features
NO-Ticking
No-Ticking, No Noise
4 Clock Hands Sets
More Choices, Suitable for Different Clock Styles
2 Movements
2 Movements include, each one can use for more than 3 years
(Please use Carbon or Low Eletric Current Batteries)
Takane Complete Mini Quartz Clock Movement - Clock Repair Kit - Choose your size by Takane
Product description
"These movements are complete and ready to be made into clocks". Made in USA Has a convenient on/off switch on the back. Specifications: Movement Case Size: 2-1/8"W x 2-1/8"H x 5/8"D. Shaft Diameter: 5/16" (8mm). Motor: Self-Start, 1 sec. step. Battery: 1 'AA' (not included). You can set the time on the front or back of the movement. This movement will only run up to 6" hands.
To request the hands and the shaft length, purchase the item first. After the payment is complete, send a message to the seller asking for the hands and shaft size that you need. To contact the seller, click on Your Account, then click on Your Orders, find the clock kit in the list and blue name where it says sold by. Now click on the Ask a Question button towards the top and follow the prompts to complete the customization request. The hand choices are shown in the photos in the upper left. The part numbers that end in a B are for black hands, the ones that end with a G are for gold hands.
The shaft length choices are Extra Short has a threaded shaft length of 3/16" and an overall length of 1/2". The Short shaft length is 5/16inch and 9/16inch overall. Medium threaded shaft is 7/16inch threaded shaft and 11/16inch overall. Medium-Long has a threaded shaft length of 9/16" and an overall length of 13/16" Long has a threaded shaft length of 11/16" and an overall length of 15/16". Extra-Long has a threaded shaft length of 15/16" and an overall length of 1 3/16".
Complete mounting hardware including: hanger, rubber washer, brass washer, hex nut and hand nut. If you do not contact us with your hand and shaft length choices, you will be sent the default which is a 5/16" threaded shaft length and H-28B for the hands. If the pictures showing the hands are not showing up, search for offering B00N639EUU they both feature the same hands.
- Made In USA.
- Run Up To 6 inch hands!!
- Case Size: 2-1/8"W x 2-1/8"H x 5/8"D
- Includes All Mounting Hardware w/metal wall hanger!!, Free Hour minute and second/sweep Hands!! (If Requested With Order).
- Scroll down to description below for instructions on ordering hands and shaft length.
User questions & answers
| Question: | i have a tide clock need new movements are they available |
| Answer: | I have no idea what a tide clock is. I recommend looking on the internet for movements of such a design. Sorry that I can't help you more. |
| Question: | How do I request the set of hands when ordering on Amazon |
| Answer: | After ordering you can go to Amazons "your orders" under "your account" and select "contact seller" beside the item you ordered to send them a message. I requested and received the second hand as well as the minute & hour hands. |
| Question: | I added to cart and did not see a place to request the hands. Does this have a sweep second hand |
| Answer: | After ordering you can go to Amazons "your orders" under "your account" and select "contact seller" beside the item you ordered to send them a message. I requested and received the second hand as well as the minute & hour hands. |
| Question: | I have hour & minute hands but would like a long second hand to match my 5 3/4" minute hand. Where do I enter this request on the Amazon order |
| Answer: | After ordering you can go to Amazons "your orders" under "your account" and select "contact seller" beside the item you ordered to send them a message. I requested and received the second hand as well as the minute & hour hands. |
Latest Reviews
View all
Affordable Speakers
- Updated: 12.04.2023
- Read reviews
Sunbeam Heat Pads
- Updated: 25.06.2023
- Read reviews
Thermostat For Reptiles
- Updated: 24.07.2023
- Read reviews
Potato Fry Cutters
- Updated: 27.02.2023
- Read reviews
Nat Geo Dna Kits
- Updated: 15.04.2023
- Read reviews